Untitled

Package: iputils-ping
Status: install ok installed
Priority: important
Section: net
Installed-Size: 111
Maintainer: Noah Meyerhans <noahm@debian.org>
Architecture: amd64
Source: iputils
Version: 3:20161105-1
Provides: ping
Depends: libc6 (>= 2.14), libcap2 (>= 1:2.10), libidn11 (>= 1.13), libnettle6
Recommends: libcap2-bin
Description: Tools to test the reachability of network hosts
 The ping command sends ICMP ECHO_REQUEST packets to a host in order to
 test if the host is reachable via the network.
 .
 This package includes a ping6 utility which supports IPv6 network
 connections.

Package: libpam-runtime
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 1016
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: all
Multi-Arch: foreign
Source: pam
Version: 1.1.8-3.6
Replaces: libpam0g-dev, libpam0g-util
Depends: debconf (>= 0.5) | debconf-2.0, debconf (>= 1.5.19) | cdebconf, libpam-modules (>= 1.0.1-6)
Conflicts: libpam0g-util
Conffiles:
 /etc/pam.conf 87fc76f18e98ee7d3848f6b81b3391e5
 /etc/pam.d/other 31aa7f2181889ffb00b87df4126d1701
Description: Runtime support for the PAM library
 Contains configuration files and  directories required for
 authentication  to work on Debian systems.  This package is required
 on almost all installations.
Homepage: http://www.linux-pam.org/

Package: libapt-pkg5.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 3056
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: apt
Version: 1.4.9
Provides: libapt-pkg (= 1.4.9)
Depends: libbz2-1.0, libc6 (>= 2.15), libgcc1 (>= 1:3.0), liblz4-1 (>= 0.0~r127), liblzma5 (>= 5.1.1alpha+20120614), libstdc++6 (>= 5.2), zlib1g (>= 1:1.2.2.3)
Recommends: apt (>= 1.4.9)
Breaks: appstream (<< 0.9.0-3~), apt (<< 1.1~exp14), libapt-inst1.5 (<< 0.9.9~)
Description: package management runtime library
 This library provides the common functionality for searching and
 managing packages as well as information about packages.
 Higher-level package managers can depend upon this library.
 .
 This includes:
  * retrieval of information about packages from multiple sources
  * retrieval of packages and all dependent packages
    needed to satisfy a request either through an internal
    solver or by interfacing with an external one
  * authenticating the sources and validating the retrieved data
  * installation and removal of packages in the system
  * providing different transports to retrieve data over cdrom, ftp,
    http, rsh as well as an interface to add more transports like
    https (apt-transport-https) and debtorrent (apt-transport-debtorrent).

Package: libaudit1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 150
Maintainer: Laurent Bigonville <bigon@debian.org>
Architecture: amd64
Multi-Arch: same
Source: audit
Version: 1:2.6.7-2
Depends: libaudit-common (>= 1:2.6.7-2), libc6 (>= 2.14), libcap-ng0
Description: Dynamic library for security auditing
 The audit-libs package contains the dynamic libraries needed for
 applications to use the audit framework. It is used to monitor systems for
 security related events.
Homepage: https://people.redhat.com/sgrubb/audit/

Package: libtinfo5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 478
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.0+20161126-1+deb9u2
Replaces: libncurses5 (<< 5.9-3)
Depends: libc6 (>= 2.16)
Breaks: dialog (<< 1.2-20130523)
Description: shared low-level terminfo library for terminal handling
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared low-level terminfo library.
Homepage: http://invisible-island.net/ncurses/

Package: perl-base
Essential: yes
Status: install ok installed
Priority: required
Section: perl
Installed-Size: 7551
Maintainer: Niko Tyni <ntyni@debian.org>
Architecture: amd64
Source: perl
Version: 5.24.1-3+deb9u5
Replaces: libfile-path-perl (<< 2.12.01), libfile-temp-perl (<< 0.2304), libio-socket-ip-perl (<< 0.37), libscalar-list-utils-perl (<< 1:1.42.02), libsocket-perl (<< 2.020.03), libxsloader-perl (<< 0.22), perl (<< 5.10.1-12), perl-modules (<< 5.20.1-3)
Provides: libfile-path-perl, libfile-temp-perl, libio-socket-ip-perl, libscalar-list-utils-perl, libsocket-perl, libxsloader-perl, perlapi-5.24.1
Pre-Depends: libc6 (>= 2.23), dpkg (>= 1.17.17)
Suggests: perl
Breaks: amanda-common (<< 1:3.3.9-2), autoconf2.13 (<< 2.13-45), backuppc (<< 3.3.1-2), dh-haskell (<< 0.3), libalien-wxwidgets-perl (<< 0.65+dfsg-2), libanyevent-perl (<< 7.070-2), libcommon-sense-perl (<< 3.72-2~), libexception-class-perl (<< 1.42), libfile-path-perl (<< 2.12.01), libfile-spec-perl (<< 3.6301), libfile-temp-perl (<< 0.2304), libgtk2-perl-doc (<< 2:1.2491-4), libio-socket-ip-perl (<< 0.37), libjcode-perl (<< 2.13-3), libmarc-charset-perl (<< 1.2), libsbuild-perl (<< 0.67.0-1), libscalar-list-utils-perl (<< 1:1.42.02), libsocket-perl (<< 2.020.03), libxsloader-perl (<< 0.22), mailagent (<< 1:3.1-81-2), pdl (<< 1:2.007-4), perl (<< 5.24.1~), perl-modules (<< 5.24.1~), texinfo (<< 6.1.0.dfsg.1-8)
Conflicts: defoma (<< 0.11.12), doc-base (<< 0.10.3), mono-gac (<< 2.10.8.1-3), safe-rm (<< 0.8), update-inetd (<< 4.41)
Description: minimal Perl system
 Perl is a scripting language used in many system scripts and utilities.
 .
 This package provides a Perl interpreter and the small subset of the
 standard run-time library required to perform basic tasks. For a full
 Perl installation, install "perl" (and its dependencies, "perl-modules-5.24"
 and "perl-doc").
Homepage: http://dev.perl.org/perl5/

Package: libudev1
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 224
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 232-25+deb9u8
Depends: libc6 (>= 2.16)
Description: libudev shared library
 This library provides access to udev device information.
Homepage: https://www.freedesktop.org/wiki/Software/systemd

Package: libnettle6
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 358
Maintainer: Magnus Holmgren <holmgren@debian.org>
Architecture: amd64
Multi-Arch: same
Source: nettle (3.3-1)
Version: 3.3-1+b2
Depends: libc6 (>= 2.14)
Description: low level cryptographic library (symmetric and one-way cryptos)
 Nettle is a cryptographic library that is designed to fit easily in more or
 less any context: In crypto toolkits for object-oriented languages (C++,
 Python, Pike, ...), in applications like LSH or GNUPG, or even in kernel
 space.
 .
 It tries to solve a problem of providing a common set of cryptographic
 algorithms for higher-level applications by implementing a
 context-independent set of cryptographic algorithms. In that light, Nettle
 doesn't do any memory allocation or I/O, it simply provides the
 cryptographic algorithms for the application to use in any environment and
 in any way it needs.
 .
 This package contains the symmetric and one-way cryptographic
 algorithms. To avoid having this package depend on libgmp, the
 asymmetric cryptos reside in a separate library, libhogweed.
Homepage: http://www.lysator.liu.se/~nisse/nettle/

Package: libattr1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 42
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: attr (1:2.4.47-2)
Version: 1:2.4.47-2+b2
Depends: libc6 (>= 2.4)
Conflicts: attr (<< 2.0.0)
Description: Extended attribute shared library
 Contains the runtime environment required by programs that make use
 of extended attributes.
Homepage: http://savannah.nongnu.org/projects/attr/

Package: libss2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 95
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs
Version: 1.43.4-2
Replaces: e2fsprogs (<< 1.34-1)
Depends: libcomerr2, libc6 (>= 2.17)
Description: command-line interface parsing library
 libss provides a simple command-line interface parser which will
 accept input from the user, parse the command into an argv argument
 vector, and then dispatch it to a handler function.
 .
 It was originally inspired by the Multics SubSystem library.
Homepage: http://e2fsprogs.sourceforge.net

Package: liblzma5
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 339
Maintainer: Jonathan Nieder <jrnieder@gmail.com>
Architecture: amd64
Multi-Arch: same
Source: xz-utils (5.2.2-1.2)
Version: 5.2.2-1.2+b1
Depends: libc6 (>= 2.17)
Description: XZ-format compression library
 XZ is the successor to the Lempel-Ziv/Markov-chain Algorithm
 compression format, which provides memory-hungry but powerful
 compression (often better than bzip2) and fast, easy decompression.
 .
 The native format of liblzma is XZ; it also supports raw (headerless)
 streams and the older LZMA format used by lzma. (For 7-Zip's related
 format, use the p7zip package instead.)
Homepage: http://tukaani.org/xz/

Package: libpam-modules-bin
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 220
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: pam
Version: 1.1.8-3.6
Replaces: libpam-modules (<< 1.1.3-8)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32)
Description: Pluggable Authentication Modules for PAM - helper binaries
 This package contains helper binaries used by the standard set of PAM
 modules in the libpam-modules package.
Homepage: http://www.linux-pam.org/

Package: grep
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1131
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.27-2
Provides: rgrep
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.14), libpcre3
Suggests: libpcre3 (>= 7.7)
Conflicts: rgrep
Description: GNU grep, egrep and fgrep
 'grep' is a utility to search for text in files; it can be used from the
 command line or in scripts.  Even if you don't want to use it, other packages
 on your system probably will.
 .
 The GNU family of grep utilities may be the "fastest grep in the west".
 GNU grep is based on a fast lazy-state deterministic matcher (about
 twice as fast as stock Unix egrep) hybridized with a Boyer-Moore-Gosper
 search for a fixed string that eliminates impossible text from being
 considered by the full regexp matcher without necessarily having to
 look at every character. The result is typically many times faster
 than Unix grep or egrep. (Regular expressions containing backreferencing
 will run more slowly, however.)
Homepage: http://www.gnu.org/software/grep/

Package: base-passwd
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 229
Maintainer: Colin Watson <cjwatson@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 3.5.43
Replaces: base
Depends: libc6 (>= 2.8), libdebconfclient0 (>= 0.145)
Recommends: debconf (>= 0.5) | debconf-2.0
Description: Debian base system master password and group files
 These are the canonical master copies of the user database files
 (/etc/passwd and /etc/group), containing the Debian-allocated user and
 group IDs. The update-passwd tool is provided to keep the system databases
 synchronized with these master files.

Package: e2fslibs
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 449
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs
Version: 1.43.4-2
Replaces: e2fsprogs (<< 1.34-1)
Provides: libe2p2, libext2fs2
Depends: libc6 (>= 2.17)
Description: ext2/ext3/ext4 file system libraries
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package provides the ext2fs and e2p libraries, for userspace software
 that directly accesses extended file systems. Programs that use libext2fs
 include e2fsck, mke2fs, and tune2fs. Programs that use libe2p include
 dumpe2fs, chattr, and lsattr.
Homepage: http://e2fsprogs.sourceforge.net

Package: liblz4-1
Status: install ok installed
Priority: extra
Section: libs
Installed-Size: 93
Maintainer: Nobuhiro Iwamatsu <iwamatsu@debian.org>
Architecture: amd64
Multi-Arch: same
Source: lz4 (0.0~r131-2)
Version: 0.0~r131-2+b1
Depends: libc6 (>= 2.14)
Description: Fast LZ compression algorithm library - runtime
 LZ4 is a very fast lossless compression algorithm, providing compression speed
 at 400 MB/s per core, scalable with multi-cores CPU. It also features an
 extremely fast decoder, with speed in multiple GB/s per core, typically
 reaching RAM speed limits on multi-core systems.
 .
 This package includes the shared library.
Homepage: https://github.com/Cyan4973/lz4

Package: debianutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 213
Maintainer: Clint Adams <clint@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 4.8.1.1
Replaces: manpages-pl (<< 1:0.5)
Depends: sensible-utils
Pre-Depends: libc6 (>= 2.15)
Description: Miscellaneous utilities specific to Debian
 This package provides a number of small utilities which are used
 primarily by the installation scripts of Debian packages, although
 you may use them directly.
 .
 The specific utilities included are:
 add-shell installkernel ischroot remove-shell run-parts savelog
 tempfile which

Package: libgcrypt20
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1266
Maintainer: Debian GnuTLS Maintainers <pkg-gnutls-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Version: 1.7.6-2+deb9u3
Depends: libc6 (>= 2.15), libgpg-error0 (>= 1.14)
Suggests: rng-tools
Description: LGPL Crypto library - runtime library
 libgcrypt contains cryptographic functions.  Many important free
 ciphers, hash algorithms and public key signing algorithms have been
 implemented:
 .
 Arcfour, Blowfish, CAST5, DES, AES, Twofish, Serpent, rfc2268 (rc2), SEED,
 Poly1305, Camellia, ChaCha20, IDEA, Salsa, CRC, MD2, MD4, MD5, RIPE-MD160,
 SHA-1, SHA-256, SHA-512, SHA3-224, SHA3-256, SHA3-384, SHA3-512, SHAKE128,
 SHAKE256 Tiger, Whirlpool, DSA, DSA2, ElGamal, RSA, ECC (Curve25519,
 sec256k1, GOST R 34.10-2001 and GOST R 34.10-2012, etc.)
Homepage: http://directory.fsf.org/project/libgcrypt/

Package: libncursesw5
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 347
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: same
Source: ncurses
Version: 6.0+20161126-1+deb9u2
Depends: libtinfo5 (= 6.0+20161126-1+deb9u2), libc6 (>= 2.14)
Recommends: libgpm2
Description: shared libraries for terminal handling (wide character support)
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the shared libraries necessary to run programs
 compiled with ncursesw, which includes support for wide characters.
Homepage: http://invisible-island.net/ncurses/

Package: bash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 5798
Maintainer: Matthias Klose <doko@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 4.4-5
Replaces: bash-completion (<< 20060301-0), bash-doc (<= 2.05-1)
Depends: base-files (>= 2.1.12), debianutils (>= 2.15)
Pre-Depends: dash (>= 0.5.5.1-2.2), libc6 (>= 2.15), libtinfo5 (>= 6)
Recommends: bash-completion (>= 20060301-0)
Suggests: bash-doc
Conflicts: bash-completion (<< 20060301-0)
Conffiles:
 /etc/bash.bashrc 87b895cef45b8090d628a1d9a0f4bfb8
 /etc/skel/.bash_logout 22bfb8c1dd94b5f3813a2b25da67463f
 /etc/skel/.bashrc ee35a240758f374832e809ae0ea4883a
 /etc/skel/.profile ecb6d3479ac3823f1da7f314d871989b
Description: GNU Bourne Again SHell
 Bash is an sh-compatible command language interpreter that executes
 commands read from the standard input or from a file.  Bash also
 incorporates useful features from the Korn and C shells (ksh and csh).
 .
 Bash is ultimately intended to be a conformant implementation of the
 IEEE POSIX Shell and Tools specification (IEEE Working Group 1003.2).
 .
 The Programmable Completion Code, by Ian Macdonald, is now found in
 the bash-completion package.
Homepage: http://tiswww.case.edu/php/chet/bash/bashtop.html

Package: libuuid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 107
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.29.2-1+deb9u1
Replaces: e2fsprogs (<< 1.34-1)
Depends: passwd, libc6 (>= 2.4)
Recommends: uuid-runtime
Description: Universally Unique ID library
 The libuuid library generates and parses 128-bit Universally Unique
 IDs (UUIDs). A UUID is an identifier that is unique within the space
 of all such identifiers across both space and time. It can be used for
 multiple purposes, from tagging objects with an extremely short lifetime
 to reliably identifying very persistent objects across a network.
 .
 See RFC 4122 for more information.

Package: libdb5.3
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 1814
Maintainer: Debian Berkeley DB Group <pkg-db-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: db5.3
Version: 5.3.28-12+deb9u1
Depends: libc6 (>= 2.17)
Description: Berkeley v5.3 Database Libraries [runtime]
 This is the runtime package for programs that use the v5.3 Berkeley
 database library.
Homepage: http://www.oracle.com/technetwork/database/database-technologies/berkeleydb/overview/index.html

Package: debconf
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 558
Maintainer: Debconf Developers <debconf-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.5.61
Replaces: debconf-tiny
Provides: debconf-2.0
Pre-Depends: perl-base (>= 5.20.1-3~)
Recommends: apt-utils (>= 0.5.1), debconf-i18n
Suggests: debconf-doc, debconf-utils, whiptail | dialog, libterm-readline-gnu-perl, libgtk2-perl (>= 1:1.130), libnet-ldap-perl, perl, libqtgui4-perl, libqtcore4-perl
Conflicts: apt (<< 0.3.12.1), cdebconf (<< 0.96), debconf-tiny, debconf-utils (<< 1.3.22), dialog (<< 0.9b-20020814-1), menu (<= 2.1.3-1), whiptail (<< 0.51.4-11), whiptail-utf8 (<= 0.50.17-13)
Conffiles:
 /etc/apt/apt.conf.d/70debconf 7e9d09d5801a42b4926b736b8eeabb73
 /etc/debconf.conf 8c0619be413824f1fc7698cee0f23811
Description: Debian configuration management system
 Debconf is a configuration management system for debian packages. Packages
 use Debconf to ask questions when they are installed.

Package: zlib1g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 156
Maintainer: Mark Brown <broonie@debian.org>
Architecture: amd64
Multi-Arch: same
Source: zlib
Version: 1:1.2.8.dfsg-5
Provides: libz1
Depends: libc6 (>= 2.14)
Breaks: libxml2 (<< 2.7.6.dfsg-2), texlive-binaries (<< 2009-12)
Conflicts: zlib1 (<= 1:1.0.4-7)
Description: compression library - runtime
 zlib is a library implementing the deflate compression method found
 in gzip and PKZIP.  This package includes the shared library.
Homepage: http://zlib.net/

Package: hostname
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 47
Maintainer: Debian Hostname Team <hostname-devel@lists.alioth.debian.org>
Architecture: amd64
Source: hostname (3.18)
Version: 3.18+b1
Replaces: nis (<< 3.17-30)
Pre-Depends: libc6 (>= 2.4)
Breaks: nis (<< 3.17-30)
Description: utility to set/show the host name or domain name
 This package provides commands which can be used to display the system's
 DNS name, and to display or set its hostname or NIS domain name.

Package: multiarch-support
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 220
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.24-11+deb9u3
Depends: libc6 (>= 2.3.6-2)
Description: Transitional package to ensure multiarch compatibility
 This is a transitional package used to ensure multiarch support is present
 in ld.so before unpacking libraries to the multiarch directories.  It can
 be removed once nothing on the system depends on it.
Homepage: http://www.gnu.org/software/libc/libc.html

Package: tzdata
Status: install ok installed
Priority: required
Section: localization
Installed-Size: 3026
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2018i-0+deb9u1
Replaces: libc0.1, libc0.3, libc6, libc6.1
Provides: tzdata-stretch
Depends: debconf (>= 0.5) | debconf-2.0
Description: time zone and daylight-saving time data
 This package contains data required for the implementation of
 standard local time for many representative locations around the
 globe. It is updated periodically to reflect changes made by
 political bodies to time zone boundaries, UTC offsets, and
 daylight-saving rules.
Homepage: http://www.iana.org/time-zones

Package: mawk
Status: install ok installed
Priority: required
Section: interpreters
Installed-Size: 183
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: mawk (1.3.3-17)
Version: 1.3.3-17+b3
Provides: awk
Pre-Depends: libc6 (>= 2.14)
Description: a pattern scanning and text processing language
 Mawk is an interpreter for the AWK Programming Language. The AWK
 language is useful for manipulation of data files, text retrieval and
 processing, and for prototyping and experimenting with algorithms. Mawk
 is a new awk meaning it implements the AWK language as defined in Aho,
 Kernighan and Weinberger, The AWK Programming Language, Addison-Wesley
 Publishing, 1988. (Hereafter referred to as the AWK book.) Mawk conforms
 to the POSIX 1003.2 (draft 11.3) definition of the AWK language
 which contains a few features not described in the AWK book, and mawk
 provides a small number of extensions.
 .
 Mawk is smaller and much faster than gawk. It has some compile-time
 limits such as NF = 32767 and sprintf buffer = 1020.

Package: gzip
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 231
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: amd64
Source: gzip (1.6-5)
Version: 1.6-5+b1
Depends: dpkg (>= 1.15.4) | install-info
Pre-Depends: libc6 (>= 2.17)
Suggests: less
Description: GNU compression utilities
 This package provides the standard GNU file compression utilities, which
 are also the default compression tools for Debian.  They typically operate
 on files with names ending in '.gz', but can also decompress files ending
 in '.Z' created with 'compress'.

Package: libelf1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 934
Maintainer: Kurt Roeckx <kurt@roeckx.be>
Architecture: amd64
Multi-Arch: same
Source: elfutils
Version: 0.168-1
Depends: libc6 (>= 2.14), zlib1g (>= 1:1.1.4)
Description: library to read and write ELF files
 The libelf1 package provides a shared library which allows reading and
 writing ELF files on a high level.  Third party programs depend on
 this package to read internals of ELF files.  The programs of the
 elfutils package use it also to generate new ELF files.
 .
 This library is part of elfutils.
Homepage: https://sourceware.org/elfutils/

Package: gpgv
Status: install ok installed
Priority: important
Section: utils
Installed-Size: 721
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: gnupg2
Version: 2.1.18-8~deb9u3
Replaces: gnupg2 (<< 2.0.21-2), gpgv2 (<< 2.1.11-7+exp1)
Depends: libbz2-1.0, libc6 (>= 2.14), libgcrypt20 (>= 1.7.0), libgpg-error0 (>= 1.14), zlib1g (>= 1:1.1.4)
Suggests: gnupg
Breaks: gnupg2 (<< 2.0.21-2), gpgv2 (<< 2.1.11-7+exp1), python-debian (<< 0.1.29)
Description: GNU privacy guard - signature verification tool
 GnuPG is GNU's tool for secure communication and data storage.
 .
 gpgv is actually a stripped-down version of gpg which is only able
 to check signatures. It is somewhat smaller than the fully-blown gpg
 and uses a different (and simpler) way to check that the public keys
 used to make the signature are valid. There are no configuration
 files and only a few options are implemented.
Homepage: https://www.gnupg.org/

Package: libcap2
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 47
Maintainer: Christian Kastner <ckk@debian.org>
Architecture: amd64
Multi-Arch: same
Version: 1:2.25-1
Depends: libc6 (>= 2.14)
Description: POSIX 1003.1e capabilities (library)
 Libcap implements the user-space interfaces to the POSIX 1003.1e capabilities
 available in Linux kernels. These capabilities are a partitioning of the all
 powerful root privilege into a set of distinct privileges.
 .
 This package contains the shared library.
Homepage: http://sites.google.com/site/fullycapable/

Package: bsdutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 238
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux (2.29.2-1+deb9u1)
Version: 1:2.29.2-1+deb9u1
Replaces: bash-completion (<< 1:2.1-4.1~)
Pre-Depends: libc6 (>= 2.16), libsystemd0
Recommends: bsdmainutils
Breaks: bash-completion (<< 1:2.1-4.1~)
Description: basic utilities from 4.4BSD-Lite
 This package contains the bare minimum of BSD utilities needed for a
 Debian system: logger, renice, script, scriptreplay, and wall. The
 remaining standard BSD utilities are provided by bsdmainutils.

Package: dash
Essential: yes
Status: install ok installed
Priority: required
Section: shells
Installed-Size: 204
Maintainer: Gerrit Pape <pape@smarden.org>
Architecture: amd64
Version: 0.5.8-2.4
Depends: debianutils (>= 2.15), dpkg (>= 1.15.0)
Pre-Depends: libc6 (>= 2.14)
Description: POSIX-compliant shell
 The Debian Almquist Shell (dash) is a POSIX-compliant shell derived
 from ash.
 .
 Since it executes scripts faster than bash, and has fewer library
 dependencies (making it more robust against software or hardware
 failures), it is used as the default system shell on Debian systems.
Homepage: http://gondor.apana.org.au/~herbert/dash/

Package: gcc-6-base
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 209
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-6
Version: 6.3.0-18+deb9u1
Breaks: gcc-4.4-base (<< 4.4.7), gcc-4.7-base (<< 4.7.3), gcj-4.4-base (<< 4.4.6-9~), gcj-4.6-base (<< 4.6.1-4~), gnat-4.4-base (<< 4.4.6-3~), gnat-4.6 (<< 4.6.1-5~)
Description: GCC, the GNU Compiler Collection (base package)
 This package contains files common to all languages and libraries
 contained in the GNU Compiler Collection (GCC).
Homepage: http://gcc.gnu.org/

Package: mount
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 444
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: util-linux
Version: 2.29.2-1+deb9u1
Replaces: bash-completion (<< 1:2.1-4.3~)
Pre-Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.17), libmount1 (>= 2.25), libselinux1 (>= 2.6-3~), libsmartcols1 (>= 2.28~rc1), libudev1 (>= 183)
Suggests: nfs-common (>= 1:1.1.0-13)
Breaks: bash-completion (<< 1:2.1-4.3~)
Description: tools for mounting and manipulating filesystems
 This package provides the mount(8), umount(8), swapon(8),
 swapoff(8), and losetup(8) commands.

Package: libsystemd0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 654
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: systemd
Version: 232-25+deb9u8
Pre-Depends: libc6 (>= 2.17), libgcrypt20 (>= 1.7.0), liblz4-1 (>= 0.0~r113), liblzma5 (>= 5.1.1alpha+20120614), libselinux1 (>= 2.1.9)
Description: systemd utility library
 The libsystemd0 library provides interfaces to various systemd components.
Homepage: https://www.freedesktop.org/wiki/Software/systemd

Package: libc6
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 10684
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: glibc
Version: 2.24-11+deb9u3
Replaces: libc6-amd64
Depends: libgcc1
Suggests: glibc-doc, debconf | debconf-2.0, libc-l10n, locales
Breaks: hurd (<< 1:0.5.git20140203-1), libtirpc1 (<< 0.2.3), locales (<< 2.24), locales-all (<< 2.24), lsb-core (<= 3.2-27), nscd (<< 2.24)
Conffiles:
 /etc/ld.so.conf.d/x86_64-linux-gnu.conf 593ad12389ab2b6f952e7ede67b8fbbf
Description: GNU C Library: Shared libraries
 Contains the standard libraries that are used by nearly all programs on
 the system. This package includes shared versions of the standard C library
 and the standard math library, as well as many others.
Homepage: http://www.gnu.org/software/libc/libc.html

Package: libfdisk1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 469
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.29.2-1+deb9u1
Depends: libblkid1 (>= 2.24.2), libc6 (>= 2.17), libuuid1 (>= 2.16)
Description: fdisk partitioning library
 The libfdisk library is used for manipulating partition tables. It is
 the core of the fdisk, cfdisk, and sfdisk tools.

Package: libpcre3
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 668
Maintainer: Matthew Vernon <matthew@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pcre3
Version: 2:8.39-3
Depends: libc6 (>= 2.14)
Pre-Depends: multiarch-support
Breaks: approx (<< 4.4-1~), cduce (<< 0.5.3-2~), cmigrep (<< 1.5-7~), galax (<< 1.1-7~), libpcre-ocaml (<< 6.0.1~), liquidsoap (<< 0.9.2-3~), ocsigen (<< 1.3.3-1~)
Conflicts: libpcre3-dev (<= 4.3-3)
Description: Old Perl 5 Compatible Regular Expression Library - runtime files
 This is a library of functions to support regular expressions whose syntax
 and semantics are as close as possible to those of the Perl 5 language.
 .
 New packages should use the newer pcre2 packages, and existing
 packages should migrate to pcre2.
 .
 This package contains the runtime libraries.

Package: coreutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 15103
Maintainer: Michael Stone <mstone@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 8.26-3
Replaces: mktemp, realpath, timeout
Pre-Depends: libacl1 (>= 2.2.51-8), libattr1 (>= 1:2.4.46-8), libc6 (>= 2.17), libselinux1 (>= 2.1.13)
Conflicts: timeout
Description: GNU core utilities
 This package contains the basic file, shell and text manipulation
 utilities which are expected to exist on every operating system.
 .
 Specifically, this package includes:
 arch base64 basename cat chcon chgrp chmod chown chroot cksum comm cp
 csplit cut date dd df dir dircolors dirname du echo env expand expr
 factor false flock fmt fold groups head hostid id install join link ln
 logname ls md5sum mkdir mkfifo mknod mktemp mv nice nl nohup nproc numfmt
 od paste pathchk pinky pr printenv printf ptx pwd readlink realpath rm
 rmdir runcon sha*sum seq shred sleep sort split stat stty sum sync tac
 tail tee test timeout touch tr true truncate tsort tty uname unexpand
 uniq unlink users vdir wc who whoami yes
Homepage: http://gnu.org/software/coreutils

Package: iproute2
Status: install ok installed
Priority: important
Section: net
Installed-Size: 1757
Maintainer: Debian iproute2 Maintainers <ah-iproute@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 4.9.0-1+deb9u1
Replaces: iproute
Provides: arpd
Depends: libc6 (>= 2.14), libdb5.3, libelf1 (>= 0.131), libmnl0 (>= 1.0.3-4~), libselinux1 (>= 2.0.15)
Recommends: libatm1 (>= 2.4.1-17~), libxtables12 (>= 1.6.0+snapshot20161117)
Suggests: iproute2-doc
Conflicts: arpd, iproute (<< 20130000-1)
Conffiles:
 /etc/iproute2/bpf_pinning fd070252e6e9996bd04d9d59e4ce21eb
 /etc/iproute2/ematch_map b91e7f9b26918449bade9573f8871d61
 /etc/iproute2/group 3aea2c0e0dd75e13a5f8f48f2936915f
 /etc/iproute2/nl_protos c0fc5315e2dd3c6b50f19da3678bce80
 /etc/iproute2/rt_dsfield 4c80d267a84d350d89d88774efe48a0f
 /etc/iproute2/rt_protos a4f97323f29caf9faf49596aea11d91a
 /etc/iproute2/rt_realms 7137bdf40e8d58c87ac7e3bba503767f
 /etc/iproute2/rt_scopes 6298b8df09e9bda23ea7da49021ca457
 /etc/iproute2/rt_tables a1313318d6778fe6b8c680248ef5a463
 /etc/iproute2/rt_tables.d/README 16d42be21c00b9edfae1fd4c39c15afc
Description: networking and traffic control tools
 The iproute2 suite is a collection of utilities for networking and
 traffic control.
 .
 These tools communicate with the Linux kernel via the (rt)netlink
 interface, providing advanced features not available through the
 legacy net-tools commands 'ifconfig' and 'route'.
Homepage: https://wiki.linuxfoundation.org/networking/iproute2

Package: e2fsprogs
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 4022
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: foreign
Version: 1.43.4-2
Replaces: hurd (<= 20040301-1), libblkid1 (<< 1.38+1.39-WIP-2005.12.10-2), libuuid1 (<< 1.38+1.39-WIP-2005.12.10-2)
Pre-Depends: e2fslibs (= 1.43.4-2), libblkid1 (>= 2.17.2), libc6 (>= 2.14), libcomerr2 (>= 1.42~WIP-2011-10-05-1), libss2 (>= 1.34-1), libuuid1 (>= 2.16), util-linux (>= 2.15~rc1-1)
Suggests: gpart, parted, fuse2fs, e2fsck-static
Conflicts: dump (<< 0.4b4-4), initscripts (<< 2.85-4), quota (<< 1.55-8.1), sysvinit (<< 2.85-4)
Conffiles:
 /etc/mke2fs.conf 22503ecadd27f788ab3e612aded4f5b0
Description: ext2/ext3/ext4 file system utilities
 The ext2, ext3 and ext4 file systems are successors of the original ext
 ("extended") file system. They are the main file system types used for
 hard disks on Debian and other Linux systems.
 .
 This package contains programs for creating, checking, and maintaining
 ext2/3/4-based file systems.  It also includes the "badblocks" program,
 which can be used to scan for bad blocks on a disk or other storage device.
Homepage: http://e2fsprogs.sourceforge.net

Package: tar
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 2770
Maintainer: Bdale Garbee <bdale@gag.com>
Architecture: amd64
Multi-Arch: foreign
Version: 1.29b-1.1
Replaces: cpio (<< 2.4.2-39)
Pre-Depends: libacl1 (>= 2.2.51-8), libc6 (>= 2.17), libselinux1 (>= 1.32)
Suggests: bzip2, ncompress, xz-utils, tar-scripts
Breaks: dpkg-dev (<< 1.14.26)
Conflicts: cpio (<= 2.4.2-38)
Conffiles:
 /etc/rmt 3c58b7cd13da1085eff0acc6a00f43c7
Description: GNU version of the tar archiving utility
 Tar is a program for packaging a set of files as a single archive in tar
 format.  The function it performs is conceptually similar to cpio, and to
 things like PKZIP in the DOS world.  It is heavily used by the Debian package
 management system, and is useful for performing system backups and exchanging
 sets of files with others.

Package: libbz2-1.0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 96
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: bzip2
Version: 1.0.6-8.1
Depends: libc6 (>= 2.4)
Description: high-quality block-sorting file compressor library - runtime
 This package contains libbzip2 which is used by the bzip2 compressor.
 .
 bzip2 is a freely available, patent free, high-quality data compressor.
 It typically compresses files to within 10% to 15% of the best available
 techniques, whilst being around twice as fast at compression and six
 times faster at decompression.
 .
 bzip2 compresses files using the Burrows-Wheeler block-sorting text
 compression algorithm, and Huffman coding. Compression is generally
 considerably better than that achieved by more conventional
 LZ77/LZ78-based compressors, and approaches the performance of the PPM
 family of statistical compressors.
 .
 The archive file format of bzip2 (.bz2) is incompatible with that of its
 predecessor, bzip (.bz).
Homepage: http://www.bzip.org/

Package: libblkid1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 367
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.29.2-1+deb9u1
Depends: libc6 (>= 2.17), libuuid1 (>= 2.16)
Description: block device ID library
 The blkid library allows system programs such as fsck and mount to
 quickly and easily find block devices by filesystem UUID or label.
 This allows system administrators to avoid specifying filesystems by
 hard-coded device names and use a logical naming system instead.

Package: lsb-base
Status: install ok installed
Priority: required
Section: misc
Installed-Size: 49
Maintainer: Debian LSB Team <debian-lsb@lists.debian.org>
Architecture: all
Multi-Arch: foreign
Source: lsb
Version: 9.20161125
Description: Linux Standard Base init script functionality
 The Linux Standard Base (http://www.linuxbase.org/) is a standard
 core system that third-party applications written for Linux can
 depend upon.
 .
 This package only includes the init-functions shell library, which
 may be used by other packages' initialization scripts for console
 logging and other purposes.
Homepage: http://www.linuxfoundation.org/collaborate/workgroups/lsb

Package: libgpg-error0
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 572
Maintainer: Debian GnuPG Maintainers <pkg-gnupg-maint@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libgpg-error
Version: 1.26-2
Depends: libc6 (>= 2.15)
Description: library for common error values and messages in GnuPG components
 Library that defines common error values for all GnuPG
 components.  Among these are GPG, GPGSM, GPGME, GPG-Agent, libgcrypt,
 pinentry, SmartCard Daemon and possibly more in the future.
Homepage: https://www.gnupg.org/related_software/libgpg-error/

Package: base-files
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 333
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 9.9+deb9u7
Replaces: base, dpkg (<= 1.15.0), miscutils
Provides: base
Pre-Depends: awk
Breaks: initscripts (<< 2.88dsf-13.3), sendfile (<< 2.1b.20080616-5.2~)
Conffiles:
 /etc/debian_version d33ef780da03f789c923c6b0df05acd6
 /etc/dpkg/origins/debian 731423fa8ba067262f8ef37882d1e742
 /etc/host.conf 4eb63731c9f5e30903ac4fc07a7fe3d6
 /etc/issue 62dc6d46260360d4299e3a931afbdce5
 /etc/issue.net 6589b08348fd877fd34398489f62caf0
 /etc/update-motd.d/10-uname 9e1b832b7b06f566156e7c9e0548247b
Description: Debian base system miscellaneous files
 This package contains the basic filesystem hierarchy of a Debian system, and
 several important miscellaneous files, such as /etc/debian_version,
 /etc/host.conf, /etc/issue, /etc/motd, /etc/profile, and others,
 and the text of several common licenses in use on Debian systems.

Package: sensible-utils
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 62
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: all
Multi-Arch: foreign
Version: 0.0.9+deb9u1
Replaces: debianutils (<= 2.32.3), manpages-pl (<= 20060617-3~)
Description: Utilities for sensible alternative selection
 This package provides a number of small utilities which are used
 by programs to sensibly select and spawn an appropriate browser,
 editor, or pager.
 .
 The specific utilities included are: sensible-browser sensible-editor
 sensible-pager

Package: passwd
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 2478
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: shadow
Version: 1:4.4-4.1
Replaces: manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libpam0g (>= 0.99.7.1), libselinux1 (>= 1.32), libsemanage1 (>= 2.0.3), libpam-modules
Conffiles:
 /etc/cron.daily/passwd db990990933b6f56322725223f13c2bc
 /etc/default/useradd cc9f9a7713ab62a32cd38363d958f396
 /etc/pam.d/chfn 4d466e00a348ba426130664d795e8afa
 /etc/pam.d/chpasswd 9900720564cb4ee98b7da29e2d183cb2
 /etc/pam.d/chsh a6e9b589e90009334ffd030d819290a6
 /etc/pam.d/newusers 1454e29bfa9f2a10836563e76936cea5
 /etc/pam.d/passwd eaf2ad85b5ccd06cceb19a3e75f40c63
Description: change and administer password and group data
 This package includes passwd, chsh, chfn, and many other programs to
 maintain password and group data.
 .
 Shadow passwords are supported.  See /usr/share/doc/passwd/README.Debian
Homepage: https://github.com/shadow-maint/shadow

Package: init-system-helpers
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 131
Maintainer: Debian systemd Maintainers <pkg-systemd-maintainers@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 1.48
Replaces: sysv-rc (<< 2.88dsf-59.3~), sysvinit-utils (<< 2.88dsf-59.3)
Depends: perl-base (>= 5.20.1-3)
Breaks: systemd (<< 44-12), sysvinit-utils (<< 2.88dsf-59.3~)
Conflicts: file-rc (<< 0.8.17~), openrc (<= 0.18.3-1)
Description: helper tools for all init systems
 This package contains helper tools that are necessary for switching between
 the various init systems that Debian contains (e. g. sysvinit or
 systemd). An example is deb-systemd-helper, a script that enables systemd unit
 files without depending on a running systemd.
 .
 It also includes the "service", "invoke-rc.d", and "update-rc.d" scripts which
 provide an abstraction for enabling, disabling, starting, and stopping
 services for all supported Debian init systems as specified by the policy.
 .
 While this package is maintained by pkg-systemd-maintainers, it is NOT
 specific to systemd at all. Maintainers of other init systems are welcome to
 include their helpers in this package.

Package: ncurses-base
Essential: yes
Status: install ok installed
Priority: required
Section: misc
Installed-Size: 340
Maintainer: Craig Small <csmall@debian.org>
Architecture: all
Multi-Arch: foreign
Source: ncurses
Version: 6.0+20161126-1+deb9u2
Provides: ncurses-runtime
Breaks: ncurses-term (<< 5.7+20100313-3)
Conffiles:
 /etc/terminfo/README 45b6df19fb5e21f55717482fa7a30171
Description: basic terminal type definitions
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains terminfo data files to support the most common types of
 terminal, including ansi, dumb, linux, rxvt, screen, sun, vt100, vt102, vt220,
 vt52, and xterm.
Homepage: http://invisible-island.net/ncurses/

Package: libc-bin
Essential: yes
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 3365
Maintainer: GNU Libc Maintainers <debian-glibc@lists.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: glibc
Version: 2.24-11+deb9u3
Depends: libc6 (>> 2.24), libc6 (<< 2.25)
Recommends: manpages
Conffiles:
 /etc/bindresvport.blacklist 4c09213317e4e3dd3c71d74404e503c5
 /etc/default/nss d6d5d6f621fb3ead2548076ce81e309c
 /etc/gai.conf 28fa76ff5a9e0566eaa1e11f1ce51f09
 /etc/ld.so.conf 4317c6de8564b68d628c21efa96b37e4
 /etc/ld.so.conf.d/libc.conf d4d833fd095fb7b90e1bb4a547f16de6
Description: GNU C Library: Binaries
 This package contains utility programs related to the GNU C Library.
 .
  * catchsegv: catch segmentation faults in programs
  * getconf: query system configuration variables
  * getent: get entries from administrative databases
  * iconv, iconvconfig: convert between character encodings
  * ldd, ldconfig: print/configure shared library dependencies
  * locale, localedef: show/generate locale definitions
  * tzselect, zdump, zic: select/dump/compile time zones
Homepage: http://www.gnu.org/software/libc/libc.html

Package: libsemanage1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 291
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsemanage
Version: 2.6-2
Depends: libsemanage-common (= 2.6-2), libaudit1 (>= 1:2.2.1), libbz2-1.0, libc6 (>= 2.14), libselinux1 (>= 2.6), libsepol1 (>= 2.6), libustr-1.0-1 (>= 1.0.4)
Breaks: policycoreutils (<< 2.4), selinux-policy-default (<< 2:2.20140421-10~), selinux-policy-mls (<< 2:2.20140421-10~)
Description: SELinux policy management library
 This package provides the shared libraries for SELinux policy management.
 It uses libsepol for binary policy manipulation and libselinux for
 interacting with the SELinux system.  It also exec's helper programs
 for loading policy and for checking whether the file_contexts
 configuration is valid (load_policy and setfiles from
 policycoreutils) presently, although this may change at least for the
 bootstrapping case
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Homepage: http://userspace.selinuxproject.org/

Package: sysvinit-utils
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 110
Maintainer: Debian sysvinit maintainers <pkg-sysvinit-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: sysvinit
Version: 2.88dsf-59.9
Replaces: initscripts (<< 2.88dsf-59.5)
Depends: libc6 (>= 2.14), init-system-helpers (>= 1.25~), util-linux (>> 2.28-2~)
Breaks: systemd (<< 215)
Description: System-V-like utilities
 This package contains the important System-V-like utilities.
 .
 Specifically, this package includes:
 killall5, pidof
Homepage: http://savannah.nongnu.org/projects/sysvinit

Package: debian-archive-keyring
Status: install ok installed
Priority: important
Section: misc
Installed-Size: 118
Maintainer: Debian Release Team <packages@release.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 2017.5
Depends: gpgv
Recommends: gnupg
Breaks: apt (<< 0.7.25.1)
Conffiles:
 /etc/apt/trusted.gpg.d/debian-archive-jessie-automatic.gpg 548a861c55fdf06fb9b0419c30cd33ec
 /etc/apt/trusted.gpg.d/debian-archive-jessie-security-automatic.gpg 28ffc0824518a9d42fb40e5caad7c5ef
 /etc/apt/trusted.gpg.d/debian-archive-jessie-stable.gpg 3cf5c69a2532cc3a3cba6c5bcf02cb7b
 /etc/apt/trusted.gpg.d/debian-archive-stretch-automatic.gpg c82e16869fb2d6234aff8b63fa00fb65
 /etc/apt/trusted.gpg.d/debian-archive-stretch-security-automatic.gpg 9fcd290147d1ed6b6768c1d1163f1383
 /etc/apt/trusted.gpg.d/debian-archive-stretch-stable.gpg 829333ce438185f23bd9c122a19ef25d
 /etc/apt/trusted.gpg.d/debian-archive-wheezy-automatic.gpg e5d3c1f7461bc12685f9b331c60beadd
 /etc/apt/trusted.gpg.d/debian-archive-wheezy-stable.gpg 722258fff5af68c002429c4433bd228b
Description: GnuPG archive keys of the Debian archive
 The Debian project digitally signs its Release files. This package
 contains the archive keys used for that.

Package: libsemanage-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 39
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Source: libsemanage
Version: 2.6-2
Replaces: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~)
Breaks: libsemanage1 (<= 2.0.41-1), libsemanage1-dev (<< 2.1.6-3~)
Conffiles:
 /etc/selinux/semanage.conf f6f9b97af233c90ca127f406fb6f0932
Description: Common files for SELinux policy management libraries
 This package provides the common files used by the shared libraries
 for SELinux policy management.
 .
 Security-enhanced Linux is a patch of the Linux kernel and a
 number of utilities with enhanced security functionality designed to
 add mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement, Role-based Access
 Control, and Multi-level Security.
Homepage: http://userspace.selinuxproject.org/

Package: libdebconfclient0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 67
Maintainer: Debian Install System Team <debian-boot@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: cdebconf
Version: 0.227
Depends: libc6 (>= 2.4)
Description: Debian Configuration Management System (C-implementation library)
 Debconf is a configuration management system for Debian packages. It is
 used by some packages to prompt you for information before they are
 installed. cdebconf is a reimplementation of the original debconf in C.
 .
 This library allows C programs to interface with cdebconf.

Package: libselinux1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 209
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libselinux (2.6-3)
Version: 2.6-3+b3
Depends: libc6 (>= 2.14), libpcre3
Description: SELinux runtime shared libraries
 This package provides the shared libraries for Security-enhanced
 Linux that provides interfaces (e.g. library functions for the
 SELinux kernel APIs like getcon(), other support functions like
 getseuserbyname()) to SELinux-aware applications. Security-enhanced
 Linux is a patch of the Linux kernel and a number of utilities with
 enhanced security functionality designed to add mandatory access
 controls to Linux.  The Security-enhanced Linux kernel contains new
 architectural components originally developed to improve the security
 of the Flask operating system. These architectural components provide
 general support for the enforcement of many kinds of mandatory access
 control policies, including those based on the concepts of Type
 Enforcement, Role-based Access Control, and Multi-level Security.
 .
 libselinux1 provides an API for SELinux applications to get and set
 process and file security contexts and to obtain security policy
 decisions.  Required for any applications that use the SELinux
 API. libselinux may use the shared libsepol to manipulate the binary
 policy if necessary (e.g. to downgrade the policy format to an older
 version supported by the kernel) when loading policy.
Homepage: http://userspace.selinuxproject.org/

Package: dpkg
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 6778
Origin: debian
Maintainer: Dpkg Developers <debian-dpkg@lists.debian.org>
Bugs: debbugs://bugs.debian.org
Architecture: amd64
Multi-Arch: foreign
Version: 1.18.25
Replaces: manpages-it (<< 2.80-4)
Depends: tar (>= 1.28-1)
Pre-Depends: libbz2-1.0, libc6 (>= 2.14), liblzma5 (>= 5.2.2), libselinux1 (>= 2.3), zlib1g (>= 1:1.1.4)
Suggests: apt, debsig-verify
Breaks: acidbase (<= 1.4.5-4), amule (<< 2.3.1+git1a369e47-3), beep (<< 1.3-4), im (<< 1:151-4), libdpkg-perl (<< 1.18.11), netselect (<< 0.3.ds1-27), pconsole (<< 1.0-12), phpgacl (<< 3.3.7-7.3), pure-ftpd (<< 1.0.43-1), systemtap (<< 2.8-1), terminatorx (<< 4.0.1-1), xvt (<= 2.1-20.1)
Conffiles:
 /etc/alternatives/README 69c4ba7f08363e998e0f2e244a04f881
 /etc/cron.daily/dpkg b8065b6bfc248caba501c3f5bb508e66
 /etc/dpkg/dpkg.cfg f4413ffb515f8f753624ae3bb365b81b
 /etc/logrotate.d/dpkg 782ea5ae536f67ff51dc8c3e2eeb4cf9
Description: Debian package management system
 This package provides the low-level infrastructure for handling the
 installation and removal of Debian software packages.
 .
 For Debian package development tools, install dpkg-dev.
Homepage: https://wiki.debian.org/Teams/Dpkg

Package: apt
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 3539
Maintainer: APT Development Team <deity@lists.debian.org>
Architecture: amd64
Version: 1.4.9
Replaces: apt-utils (<< 1.3~exp2~)
Depends: adduser, gpgv | gpgv2 | gpgv1, debian-archive-keyring, init-system-helpers (>= 1.18~), libapt-pkg5.0 (>= 1.3~rc2), libc6 (>= 2.15), libgcc1 (>= 1:3.0), libstdc++6 (>= 5.2)
Recommends: gnupg | gnupg2 | gnupg1
Suggests: apt-doc, aptitude | synaptic | wajig, dpkg-dev (>= 1.17.2), powermgmt-base, python-apt
Breaks: apt-utils (<< 1.3~exp2~)
Conffiles:
 /etc/apt/apt.conf.d/01autoremove 0b1391c01d75f95fa4ea5ac01219b515
 /etc/cron.daily/apt-compat bc4a71cbcaeed4179f25d798257fa980
 /etc/kernel/postinst.d/apt-auto-removal 4ad976a68f045517cf4696cec7b8aa3a
 /etc/logrotate.d/apt 179f2ed4f85cbaca12fa3d69c2a4a1c3
Description: commandline package manager
 This package provides commandline tools for searching and
 managing as well as querying information about packages
 as a low-level access to all features of the libapt-pkg library.
 .
 These include:
  * apt-get for retrieval of packages and information about them
    from authenticated sources and for installation, upgrade and
    removal of packages together with their dependencies
  * apt-cache for querying available information about installed
    as well as installable packages
  * apt-cdrom to use removable media as a source for packages
  * apt-config as an interface to the configuration settings
  * apt-key as an interface to manage authentication keys

Package: diffutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1327
Maintainer: Santiago Vila <sanvila@debian.org>
Architecture: amd64
Version: 1:3.5-3
Replaces: diff
Pre-Depends: libc6 (>= 2.17)
Suggests: diffutils-doc, wdiff
Description: File comparison utilities
 The diffutils package provides the diff, diff3, sdiff, and cmp programs.
 .
 `diff' shows differences between two files, or each corresponding file
 in two directories.  `cmp' shows the offsets and line numbers where
 two files differ.  `cmp' can also show all the characters that
 differ between the two files, side by side.  `diff3' shows differences
 among three files.  `sdiff' merges two files interactively.
 .
 The set of differences produced by `diff' can be used to distribute
 updates to text files (such as program source code) to other people.
 This method is especially useful when the differences are small compared
 to the complete files.  Given `diff' output, the `patch' program can
 update, or "patch", a copy of the file.
Homepage: http://www.gnu.org/software/diffutils/

Package: libpam-modules
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 874
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pam
Version: 1.1.8-3.6
Replaces: libpam-umask, libpam0g-util
Provides: libpam-mkhomedir, libpam-motd, libpam-umask
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.15), libdb5.3, libpam0g (>= 1.1.3-2), libselinux1 (>= 2.1.9), debconf (>= 0.5) | debconf-2.0, libpam-modules-bin (= 1.1.8-3.6)
Conflicts: libpam-mkhomedir, libpam-motd, libpam-umask
Conffiles:
 /etc/security/access.conf 13ec4d189f0ed9acf3433977a53d446b
 /etc/security/group.conf f1e26e8db6f7abd2d697d7dad3422c36
 /etc/security/limits.conf 11c27ba00b7bd6a255f33126f75c5005
 /etc/security/namespace.conf 6424c99a62ddf4b7d3ca713bb06ded89
 /etc/security/namespace.init d9e6a7c85e966427ef23a04ec6c7000f
 /etc/security/pam_env.conf ddee4a931170dc21b4e0b9bb28e02a7b
 /etc/security/sepermit.conf d41c74654734a5c069a37bfc02f0a6d4
 /etc/security/time.conf 06e05c6079e839c8833ac7c3abfde192
Description: Pluggable Authentication Modules for PAM
 This package completes the set of modules for PAM. It includes the
  pam_unix.so module as well as some specialty modules.
Homepage: http://www.linux-pam.org/

Package: libstdc++6
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 1998
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-6
Version: 6.3.0-18+deb9u1
Replaces: libstdc++6-6-dbg (<< 4.9.0-3)
Depends: gcc-6-base (= 6.3.0-18+deb9u1), libc6 (>= 2.18), libgcc1 (>= 1:4.2)
Breaks: blockattack (<= 1.4.1+ds1-2.1+b2), boo (<= 0.9.5~git20110729.r1.202a430-2), c++-annotations (<= 10.2.0-1), clustalx (<= 2.1+lgpl-3), dff (<= 1.3.0+dfsg.1-4.1+b3), digikam-private-libs (<= 4:4.4.0-1.1+b2), emscripten (<= 1.22.1-1), ergo (<= 3.4.0-1), fceux (<= 2.2.2+dfsg0-1), fiona (<= 1.5.1-2), flush (<= 0.9.12-3.1), freeorion (<= 0.4.4+git20150327-2), fslview (<= 4.0.1-4), fwbuilder (<= 5.1.0-4), gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2), gnote (<= 3.16.2-1), gnudatalanguage (<= 0.9.5-2+b2), innoextract (<= 1.4-1+b1), libantlr-dev (<= 2.7.7+dfsg-6), libapache2-mod-passenger (<= 5.0.7-1), libaqsis1 (<= 1.8.2-1), libassimp3 (<= 3.0~dfsg-4), libboost-date-time1.54.0, libboost-date-time1.55.0, libchemps2-1 (<= 1.5-1), libcpprest2.4 (<= 2.4.0-2), libdap17 (<= 3.14.0-2), libdapclient6 (<= 3.14.0-2), libdapserver7 (<= 3.14.0-2), libdavix0 (<= 0.4.0-1+b1), libdballe6 (<= 6.8-1), libdiet-admin2.8 (<= 2.8.0-1+b3), libdiet-client2.8 (<= 2.8.0-1+b3), libdiet-sed2.8 (<= 2.8.0-1+b3), libfreefem++ (<= 3.37.1-1), libgazebo5 (<= 5.0.1+dfsg-2.1), libgetfem4++ (<= 4.2.1~beta1~svn4635~dfsg-3+b1), libgmsh2 (<= 2.9.3+dfsg1-1), libinsighttoolkit4.7 (<= 4.7.2-2), libkolabxml1 (<= 1.1.0-3), libmarisa0 (<= 0.2.4-8), libogre-1.8.0 (<= 1.8.0+dfsg1-7+b1), libogre-1.9.0 (<= 1.9.0+dfsg1-4), libopencv-core2.4, libopenmpi1.6, libopenwalnut1 (<= 1.4.0~rc1+hg3a3147463ee2-1+b1), libpqxx-4.0 (<= 4.0.1+dfsg-3), libreoffice-core (<= 1:4.4.5-2), librime1 (<= 1.2+dfsg-2), libsigc++-2.0-0c2a (<= 2.4.1-1+b1), libwibble-dev (<= 1.1-1), libwreport2 (<= 2.14-1), libxmltooling6 (<= 1.5.3-2.1), lightspark (<= 0.7.2+git20150512-2+b1), mira-assembler (<= 4.9.5-1), mongodb (<= 1:2.4.14-2), mongodb-server (<= 1:2.4.14-2), ncbi-blast+ (<= 2.2.30-4), openscad (<= 2014.03+dfsg-1+b1), passepartout (<= 0.7.1-1.1), pdf2djvu (<= 0.7.21-2), photoprint (<= 0.4.2~pre2-2.3+b2), plastimatch (<= 1.6.2+dfsg-1), plee-the-bear (<= 0.6.0-3.1), povray (<= 1:3.7.0.0-8), powertop (<= 2.6.1-1), printer-driver-brlaser (<= 3-3), psi4 (<= 4.0~beta5+dfsg-2+b1), python-fiona (<= 1.5.1-2), python-guiqwt (<= 2.3.1-1), python-healpy (<= 1.8.1-1+b1), python-htseq (<= 0.5.4p3-2), python-imposm (<= 2.5.0-3+b2), python-pysph (<= 0~20150606.gitfa26de9-5), python-rasterio (<= 0.24.0-1), python-scipy (<= 0.14.1-1), python-sfml (<= 2.2~git20150611.196c88+dfsg-1+b1), python3-fiona (<= 1.5.1-2), python3-scipy (<= 0.14.1-1), python3-sfml (<= 2.2~git20150611.196c88+dfsg-1+b1), python3-taglib (<= 0.3.6+dfsg-2+b2), realtimebattle (<= 1.0.8-14), ruby-passenger (<= 5.0.7-1), schroot (<= 1.6.10-1+b1), sqlitebrowser (<= 3.5.1-3), tecnoballz (<= 0.93.1-6), wesnoth-1.12-core (<= 1:1.12.4-1), widelands (<= 1:18-3+b1), xflr5 (<= 6.09.06-2)
Conflicts: scim (<< 1.4.2-1)
Description: GNU Standard C++ Library v3
 This package contains an additional runtime library for C++ programs
 built with the GNU compiler.
 .
 libstdc++-v3 is a complete rewrite from the previous libstdc++-v2, which
 was included up to g++-2.95. The first version of libstdc++-v3 appeared
 in g++-3.0.
Homepage: http://gcc.gnu.org/

Package: libaudit-common
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 30
Maintainer: Laurent Bigonville <bigon@debian.org>
Architecture: all
Multi-Arch: foreign
Source: audit
Version: 1:2.6.7-2
Replaces: libaudit0, libaudit1 (<< 1:2.2.1-2)
Breaks: libaudit0, libaudit1 (<< 1:2.2.1-2)
Conffiles:
 /etc/libaudit.conf cdc703f9d27f0d980271a9e95d0f18b2
Description: Dynamic library for security auditing - common files
 The audit-libs package contains the dynamic libraries needed for
 applications to use the audit framework. It is used to monitor systems for
 security related events.
 .
 This package contains the libaudit.conf configuration file and the associated
 manpage.
Homepage: https://people.redhat.com/sgrubb/audit/

Package: libcomerr2
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 83
Maintainer: Theodore Y. Ts'o <tytso@mit.edu>
Architecture: amd64
Multi-Arch: same
Source: e2fsprogs
Version: 1.43.4-2
Replaces: e2fsprogs (<< 1.34-1)
Provides: libcomerr-kth-compat
Depends: libc6 (>= 2.17)
Description: common error description library
 libcomerr is an attempt to present a common error-handling mechanism to
 manipulate the most common form of error code in a fashion that does not
 have the problems identified with mechanisms commonly in use.
Homepage: http://e2fsprogs.sourceforge.net

Package: findutils
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 1854
Maintainer: Andreas Metzler <ametzler@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 4.6.0+git+20161106-2
Pre-Depends: libc6 (>= 2.17), libselinux1 (>= 1.32)
Suggests: mlocate | locate
Breaks: binstats (<< 1.08-8.1), debhelper (<< 9.20130504), guilt (<< 0.36-0.2), kernel-package (<< 13.000), libpython3.4-minimal (<< 3.4.4-2), libpython3.5-minimal (<< 3.5.1-3), lsat (<< 0.9.7.1-2.1), mc (<< 3:4.8.11-1), sendmail (<< 8.14.4-5), switchconf (<< 0.0.9-2.1)
Conflicts: debconf (<< 1.5.50)
Description: utilities for finding files--find, xargs
 GNU findutils provides utilities to find files meeting specified
 criteria and perform various actions on the files which are found.
 This package contains 'find' and 'xargs'; however, 'locate' has
 been split off into a separate package.
Homepage: http://savannah.gnu.org/projects/findutils/

Package: libpam0g
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 229
Maintainer: Steve Langasek <vorlon@debian.org>
Architecture: amd64
Multi-Arch: same
Source: pam
Version: 1.1.8-3.6
Replaces: libpam0g-util
Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), debconf (>= 0.5) | debconf-2.0
Suggests: libpam-doc
Description: Pluggable Authentication Modules library
 Contains the shared library for Linux-PAM, a library that enables the
 local system administrator to choose how applications authenticate users.
 In other words, without rewriting or recompiling a PAM-aware application,
 it is possible to switch between the authentication mechanism(s) it uses.
 One may entirely upgrade the local authentication system without touching
 the applications themselves.
Homepage: http://www.linux-pam.org/

Package: libcap-ng0
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 43
Maintainer: Pierre Chifflier <pollux@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libcap-ng (0.7.7-3)
Version: 0.7.7-3+b1
Depends: libc6 (>= 2.8)
Description: An alternate POSIX capabilities library
 This library implements the user-space interfaces to the POSIX
 1003.1e capabilities available in Linux kernels.  These capabilities are
 a partitioning of the all powerful root privilege into a set of distinct
 privileges.
 .
 The libcap-ng library is intended to make programming with POSIX
 capabilities much easier than the traditional libcap library.
 .
 This package contains header files and libraries for libcap-ng.
Homepage: http://people.redhat.com/sgrubb/libcap-ng

Package: libmount1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 403
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.29.2-1+deb9u1
Depends: libblkid1 (>= 2.17.2), libc6 (>= 2.17), libselinux1 (>= 2.6-3~)
Description: device mounting library
 This device mounting library is used by mount and umount helpers.

Package: login
Essential: yes
Status: install ok installed
Priority: required
Section: admin
Installed-Size: 2747
Maintainer: Shadow package maintainers <pkg-shadow-devel@lists.alioth.debian.org>
Architecture: amd64
Source: shadow
Version: 1:4.4-4.1
Replaces: manpages-de (<< 0.5-3), manpages-tr (<< 1.0.5), manpages-zh (<< 1.5.1-1)
Pre-Depends: libaudit1 (>= 1:2.2.1), libc6 (>= 2.14), libpam0g (>= 0.99.7.1), libpam-runtime, libpam-modules (>= 1.1.8-1)
Conflicts: amavisd-new (<< 2.3.3-8), backupninja (<< 0.9.3-5), echolot (<< 2.1.8-4), gnunet (<< 0.7.0c-2), python-4suite (<< 0.99cvs20060405-1)
Conffiles:
 /etc/login.defs c92ea31d5ac50ae3e5d33d24f1e70983
 /etc/pam.d/login 1fd6cb4d4267a68148ee9973510a9d3e
 /etc/pam.d/su ce6dcfda3b190a27a455bb38a45ff34a
 /etc/securetty a7fc5292d9ae16f24d45f94fe88e001b
Description: system login tools
 These tools are required to be able to login and use your system. The
 login program invokes your user shell and enables command execution. The
 newgrp program is used to change your effective group ID (useful for
 workgroup type situations). The su program allows changing your effective
 user ID (useful being able to execute commands as another user).
Homepage: https://github.com/shadow-maint/shadow

Package: adduser
Status: install ok installed
Priority: important
Section: admin
Installed-Size: 849
Maintainer: Debian Adduser Developers <adduser-devel@lists.alioth.debian.org>
Architecture: all
Multi-Arch: foreign
Version: 3.115
Depends: passwd, debconf (>= 0.5) | debconf-2.0
Suggests: liblocale-gettext-perl, perl
Conffiles:
 /etc/deluser.conf 773fb95e98a27947de4a95abb3d3f2a2
Description: add and remove users and groups
 This package includes the 'adduser' and 'deluser' commands for creating
 and removing users.
 .
  - 'adduser' creates new users and groups and adds existing users to
    existing groups;
  - 'deluser' removes users and groups and removes users from a given
    group.
 .
 Adding users with 'adduser' is much easier than adding them manually.
 Adduser will choose appropriate UID and GID values, create a home
 directory, copy skeletal user configuration, and automate setting
 initial values for the user's password, real name and so on.
 .
 Deluser can back up and remove users' home directories
 and mail spool or all the files they own on the system.
 .
 A custom script can be executed after each of the commands.
 .
  Development mailing list:
    http://lists.alioth.debian.org/mailman/listinfo/adduser-devel/
Homepage: http://alioth.debian.org/projects/adduser/

Package: libacl1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 62
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: acl (2.2.52-3)
Version: 2.2.52-3+b1
Depends: libattr1 (>= 1:2.4.46-8), libc6 (>= 2.14)
Conflicts: acl (<< 2.0.0), libacl1-kerberos4kth
Description: Access control list shared library
 This package contains the libacl.so dynamic library containing
 the POSIX 1003.1e draft standard 17 functions for manipulating
 access control lists.
Homepage: http://savannah.nongnu.org/projects/acl/

Package: ncurses-bin
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 536
Maintainer: Craig Small <csmall@debian.org>
Architecture: amd64
Multi-Arch: foreign
Source: ncurses
Version: 6.0+20161126-1+deb9u2
Pre-Depends: libc6 (>= 2.14), libtinfo5 (>= 6.0+20151017), libtinfo5 (<< 6.1~)
Description: terminal-related programs and man pages
 The ncurses library routines are a terminal-independent method of
 updating character screens with reasonable optimization.
 .
 This package contains the programs used for manipulating the terminfo
 database and individual terminfo entries, as well as some programs for
 resetting terminals and such.
Homepage: http://invisible-island.net/ncurses/

Package: libmnl0
Status: install ok installed
Priority: important
Section: libs
Installed-Size: 46
Maintainer: Anibal Monsalve Salazar <anibal@debian.org>
Architecture: amd64
Multi-Arch: same
Source: libmnl
Version: 1.0.4-2
Depends: libc6 (>= 2.14)
Description: minimalistic Netlink communication library
 libmnl is a minimalistic user-space library oriented to Netlink developers.
 There are a lot of common tasks in parsing, validating, constructing of
 both the Netlink header and TLVs that are repetitive and easy to get wrong.
 This library aims to provide simple helpers that allows you to re-use code
 and to avoid re-inventing the wheel.
 .
 The main features of this library are:
 .
 Small: the shared library requires around 30KB for an x86-based computer.
 .
 Simple: this library avoids complexity and elaborated abstractions that
 tend to hide Netlink details.
 .
 Easy to use: the library simplifies the work for Netlink-wise developers.
 It provides functions to make socket handling, message building,
 validating, parsing and sequence tracking, easier.
 .
 Easy to re-use: you can use the library to build your own abstraction
 layer on top of this library.
 .
 Decoupling: the interdependency of the main bricks that compose the
 library is reduced, i.e. the library provides many helpers, but the
 programmer is not forced to use them.
 .
 This package contains the shared libraries needed to run programs that use
 the minimalistic Netlink communication library.
Homepage: http://netfilter.org/projects/libmnl/

Package: libsepol1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 653
Maintainer: Debian SELinux maintainers <selinux-devel@lists.alioth.debian.org>
Architecture: amd64
Multi-Arch: same
Source: libsepol
Version: 2.6-2
Depends: libc6 (>= 2.14)
Description: SELinux library for manipulating binary security policies
 Security-enhanced Linux is a patch of the Linux kernel and a number
 of utilities with enhanced security functionality designed to add
 mandatory access controls to Linux.  The Security-enhanced Linux
 kernel contains new architectural components originally developed to
 improve the security of the Flask operating system. These
 architectural components provide general support for the enforcement
 of many kinds of mandatory access control policies, including those
 based on the concepts of Type Enforcement®, Role-based Access
 Control, and Multi-level Security.
 .
 libsepol provides an API for the manipulation of SELinux binary policies.
 It is used by checkpolicy (the policy compiler) and similar tools, as well
 as by programs like load_policy that need to perform specific transformations
 on binary policies such as customizing policy boolean settings.
Homepage: http://userspace.selinuxproject.org/

Package: libidn11
Status: install ok installed
Priority: standard
Section: libs
Installed-Size: 306
Maintainer: Debian Libidn Team <help-libidn@gnu.org>
Architecture: amd64
Multi-Arch: same
Source: libidn
Version: 1.33-1
Replaces: libidn11-dev
Depends: libc6 (>= 2.14)
Conflicts: libidn9-dev
Description: GNU Libidn library, implementation of IETF IDN specifications
 GNU Libidn is a fully documented implementation of the Stringprep,
 Punycode and IDNA specifications.  Libidn's purpose is to encode and
 decode internationalized domain names.  The Nameprep, XMPP, SASLprep,
 and iSCSI profiles are supported.
 .
 This package contains the shared library.
Homepage: https://www.gnu.org/software/libidn/

Package: libgcc1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 108
Maintainer: Debian GCC Maintainers <debian-gcc@lists.debian.org>
Architecture: amd64
Multi-Arch: same
Source: gcc-6 (6.3.0-18+deb9u1)
Version: 1:6.3.0-18+deb9u1
Depends: gcc-6-base (= 6.3.0-18+deb9u1), libc6 (>= 2.14)
Breaks: gcc-4.3 (<< 4.3.6-1), gcc-4.4 (<< 4.4.6-4), gcc-4.5 (<< 4.5.3-2)
Description: GCC support library
 Shared version of the support library, a library of internal subroutines
 that GCC uses to overcome shortcomings of particular machines, or
 special needs for some languages.
Homepage: http://gcc.gnu.org/

Package: util-linux
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 3558
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 2.29.2-1+deb9u1
Replaces: bash-completion (<< 1:2.1-4.1~), initscripts (<< 2.88dsf-59.2~), mount (= 2.26.2-3), mount (= 2.26.2-3ubuntu1), sysvinit-utils (<< 2.88dsf-59.1~)
Pre-Depends: libblkid1 (>= 2.25), libc6 (>= 2.15), libfdisk1 (>= 2.29~rc2), libmount1 (>= 2.25), libncursesw5 (>= 6), libpam0g (>= 0.99.7.1), libselinux1 (>= 2.6-3~), libsmartcols1 (>= 2.28~rc1), libsystemd0, libtinfo5 (>= 6), libudev1 (>= 183), libuuid1 (>= 2.16), zlib1g (>= 1:1.1.4)
Suggests: dosfstools, kbd | console-tools, util-linux-locales
Breaks: bash-completion (<< 1:2.1-4.1~), cloud-utils (<< 0.27-1~), grml-debootstrap (<< 0.68), mount (= 2.26.2-3), mount (= 2.26.2-3ubuntu1), sysvinit-utils (<< 2.88dsf-59.4~)
Conffiles:
 /etc/default/hwclock 3916544450533eca69131f894db0ca12
 /etc/init.d/hwclock.sh 1ca5c0743fa797ffa364db95bb8d8d8e
 /etc/pam.d/runuser b8b44b045259525e0fae9e38fdb2aeeb
 /etc/pam.d/runuser-l 2106ea05877e8913f34b2c77fa02be45
Description: miscellaneous system utilities
 This package contains a number of important utilities, most of which
 are oriented towards maintenance of your system. Some of the more
 important utilities included in this package allow you to partition
 your hard disk, view kernel messages, and create new filesystems.

Package: libustr-1.0-1
Status: install ok installed
Priority: optional
Section: libs
Installed-Size: 258
Maintainer: Vaclav Ovsik <vaclav.ovsik@i.cz>
Architecture: amd64
Multi-Arch: same
Source: ustr
Version: 1.0.4-6
Depends: libc6 (>= 2.14)
Description: Micro string library: shared library
 ustr (Micro string library) is a string API for C. It has tiny overhead over
 just plain strdup(), is much safer, is easier to use, is faster for many
 operations, can be used with read-only or automatically allocated data. You
 don't even need to link to the library to use it (so there are no
 dependencies).
 .
 This package contains the shared library.
Homepage: http://www.and.org/ustr/

Package: sed
Essential: yes
Status: install ok installed
Priority: required
Section: utils
Installed-Size: 799
Maintainer: Clint Adams <clint@debian.org>
Architecture: amd64
Multi-Arch: foreign
Version: 4.4-1
Pre-Depends: libc6 (>= 2.14), libselinux1 (>= 1.32)
Description: GNU stream editor for filtering/transforming text
 sed reads the specified files or the standard input if no
 files are specified, makes editing changes according to a
 list of commands, and writes the results to the standard
 output.
Homepage: https://www.gnu.org/software/sed/

Package: libsmartcols1
Status: install ok installed
Priority: required
Section: libs
Installed-Size: 257
Maintainer: Debian util-linux Maintainers <ah-util-linux@debian.org>
Architecture: amd64
Multi-Arch: same
Source: util-linux
Version: 2.29.2-1+deb9u1
Depends: libc6 (>= 2.17)
Description: smart column output alignment library
 This smart column output alignment library is used by fdisk utilities.