SHARE
TWEET

Slic3r config bundle for CTC printer with Sailfish.ini

dragonflydiy Jan 10th, 2016 (edited) 381 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. # generated by Slic3r 1.2.9 on Sun Jan 10 14:54:36 2016
  2.  
  3. [filament:ABS 1.75]
  4. bed_temperature = 110
  5. bridge_fan_speed = 100
  6. cooling = 1
  7. disable_fan_first_layers = 3
  8. extrusion_multiplier = 1
  9. fan_always_on = 0
  10. fan_below_layer_time = 60
  11. filament_colour = #FFFFFF
  12. filament_diameter = 1.75
  13. first_layer_bed_temperature = 110
  14. first_layer_temperature = 200
  15. max_fan_speed = 100
  16. min_fan_speed = 35
  17. min_print_speed = 10
  18. slowdown_below_layer_time = 30
  19. temperature = 200
  20.  
  21. [filament:PLA 1.75]
  22. bed_temperature = 0
  23. bridge_fan_speed = 100
  24. cooling = 1
  25. disable_fan_first_layers = 3
  26. extrusion_multiplier = 1
  27. fan_always_on = 0
  28. fan_below_layer_time = 60
  29. filament_colour = #FFFFFF
  30. filament_diameter = 1.75
  31. first_layer_bed_temperature = 0
  32. first_layer_temperature = 190
  33. max_fan_speed = 100
  34. min_fan_speed = 35
  35. min_print_speed = 10
  36. slowdown_below_layer_time = 60
  37. temperature = 190
  38.  
  39. [filament:PLA 1.75 cool for dual extrusion]
  40. bed_temperature = 80
  41. bridge_fan_speed = 100
  42. cooling = 1
  43. disable_fan_first_layers = 3
  44. extrusion_multiplier = 1
  45. fan_always_on = 0
  46. fan_below_layer_time = 60
  47. filament_colour = #FFFFFF
  48. filament_diameter = 1.75
  49. first_layer_bed_temperature = 80
  50. first_layer_temperature = 180
  51. max_fan_speed = 100
  52. min_fan_speed = 35
  53. min_print_speed = 10
  54. slowdown_below_layer_time = 5
  55. temperature = 170
  56.  
  57. [filament:TPU (flex) 1.75]
  58. bed_temperature = 70
  59. bridge_fan_speed = 100
  60. cooling = 1
  61. disable_fan_first_layers = 3
  62. extrusion_multiplier = 1
  63. fan_always_on = 0
  64. fan_below_layer_time = 60
  65. filament_colour = #FFFFFF
  66. filament_diameter = 1.71
  67. first_layer_bed_temperature = 70
  68. first_layer_temperature = 200
  69. max_fan_speed = 100
  70. min_fan_speed = 35
  71. min_print_speed = 10
  72. slowdown_below_layer_time = 60
  73. temperature = 200
  74.  
  75. [presets]
  76. filament = PLA 1.75.ini
  77. filament_1 = PLA 1.75
  78. print = CTC.ini
  79. printer =
  80.  
  81. [print:CTC]
  82. avoid_crossing_perimeters = 0
  83. bottom_solid_layers = 3
  84. bridge_acceleration = 0
  85. bridge_flow_ratio = 1
  86. bridge_speed = 60
  87. brim_width = 0
  88. complete_objects = 0
  89. default_acceleration = 0
  90. dont_support_bridges = 1
  91. external_fill_pattern = rectilinear
  92. external_perimeter_extrusion_width = 0
  93. external_perimeter_speed = 50%
  94. external_perimeters_first = 0
  95. extra_perimeters = 1
  96. extruder_clearance_height = 20
  97. extruder_clearance_radius = 20
  98. extrusion_width = 0
  99. fill_angle = 45
  100. fill_density = 20%
  101. fill_pattern = rectilinear
  102. first_layer_acceleration = 0
  103. first_layer_extrusion_width = 200%
  104. first_layer_height = 0.3
  105. first_layer_speed = 30
  106. gap_fill_speed = 20
  107. gcode_comments = 0
  108. infill_acceleration = 0
  109. infill_every_layers = 1
  110. infill_extruder = 1
  111. infill_extrusion_width = 0
  112. infill_first = 0
  113. infill_only_where_needed = 0
  114. infill_overlap = 15%
  115. infill_speed = 40
  116. interface_shells = 0
  117. layer_height = 0.2
  118. max_print_speed = 50
  119. max_volumetric_speed = 0
  120. min_skirt_length = 0
  121. notes =
  122. only_retract_when_crossing_perimeters = 1
  123. ooze_prevention = 0
  124. output_filename_format = [input_filename_base].gcode
  125. overhangs = 1
  126. perimeter_acceleration = 0
  127. perimeter_extruder = 1
  128. perimeter_extrusion_width = 0
  129. perimeter_speed = 40
  130. perimeters = 3
  131. post_process = d:\apps\gpx\gpx.bat
  132. raft_layers = 0
  133. resolution = 0
  134. seam_position = random
  135. skirt_distance = 6
  136. skirt_height = 1
  137. skirts = 0
  138. small_perimeter_speed = 15
  139. solid_infill_below_area = 70
  140. solid_infill_every_layers = 0
  141. solid_infill_extruder = 1
  142. solid_infill_extrusion_width = 0
  143. solid_infill_speed = 20
  144. spiral_vase = 0
  145. standby_temperature_delta = -10
  146. support_material = 0
  147. support_material_angle = 0
  148. support_material_contact_distance = 0.2
  149. support_material_enforce_layers = 0
  150. support_material_extruder = 1
  151. support_material_extrusion_width = 0
  152. support_material_interface_extruder = 1
  153. support_material_interface_layers = 3
  154. support_material_interface_spacing = 0
  155. support_material_interface_speed = 100%
  156. support_material_pattern = pillars
  157. support_material_spacing = 2.5
  158. support_material_speed = 60
  159. support_material_threshold = 0
  160. thin_walls = 1
  161. threads = 6
  162. top_infill_extrusion_width = 0
  163. top_solid_infill_speed = 15
  164. top_solid_layers = 3
  165. travel_speed = 80
  166. xy_size_compensation = -0.2
  167.  
  168. [print:CTC Fast]
  169. avoid_crossing_perimeters = 0
  170. bottom_solid_layers = 3
  171. bridge_acceleration = 0
  172. bridge_flow_ratio = 1
  173. bridge_speed = 60
  174. brim_width = 0
  175. complete_objects = 0
  176. default_acceleration = 0
  177. dont_support_bridges = 1
  178. external_fill_pattern = rectilinear
  179. external_perimeter_extrusion_width = 0
  180. external_perimeter_speed = 50%
  181. external_perimeters_first = 0
  182. extra_perimeters = 1
  183. extruder_clearance_height = 20
  184. extruder_clearance_radius = 20
  185. extrusion_width = 0
  186. fill_angle = 45
  187. fill_density = 20%
  188. fill_pattern = rectilinear
  189. first_layer_acceleration = 0
  190. first_layer_extrusion_width = 200%
  191. first_layer_height = 0.3
  192. first_layer_speed = 30
  193. gap_fill_speed = 60
  194. gcode_comments = 0
  195. infill_acceleration = 0
  196. infill_every_layers = 1
  197. infill_extruder = 1
  198. infill_extrusion_width = 0
  199. infill_first = 0
  200. infill_only_where_needed = 0
  201. infill_overlap = 15%
  202. infill_speed = 80
  203. interface_shells = 0
  204. layer_height = 0.2
  205. max_print_speed = 100
  206. max_volumetric_speed = 0
  207. min_skirt_length = 0
  208. notes =
  209. only_retract_when_crossing_perimeters = 1
  210. ooze_prevention = 0
  211. output_filename_format = [input_filename_base].gcode
  212. overhangs = 1
  213. perimeter_acceleration = 0
  214. perimeter_extruder = 1
  215. perimeter_extrusion_width = 0
  216. perimeter_speed = 80
  217. perimeters = 3
  218. post_process = d:\apps\gpx\gpx.bat
  219. raft_layers = 0
  220. resolution = 0
  221. seam_position = random
  222. skirt_distance = 6
  223. skirt_height = 1
  224. skirts = 0
  225. small_perimeter_speed = 15
  226. solid_infill_below_area = 70
  227. solid_infill_every_layers = 0
  228. solid_infill_extruder = 1
  229. solid_infill_extrusion_width = 0
  230. solid_infill_speed = 60
  231. spiral_vase = 0
  232. standby_temperature_delta = -10
  233. support_material = 0
  234. support_material_angle = 0
  235. support_material_contact_distance = 0.2
  236. support_material_enforce_layers = 0
  237. support_material_extruder = 1
  238. support_material_extrusion_width = 0
  239. support_material_interface_extruder = 1
  240. support_material_interface_layers = 3
  241. support_material_interface_spacing = 0
  242. support_material_interface_speed = 100%
  243. support_material_pattern = pillars
  244. support_material_spacing = 2.5
  245. support_material_speed = 60
  246. support_material_threshold = 0
  247. thin_walls = 1
  248. threads = 6
  249. top_infill_extrusion_width = 0
  250. top_solid_infill_speed = 15
  251. top_solid_layers = 3
  252. travel_speed = 80
  253. xy_size_compensation = -0.2
  254.  
  255. [print:CTC SLOW for flex filament]
  256. avoid_crossing_perimeters = 0
  257. bottom_solid_layers = 3
  258. bridge_acceleration = 0
  259. bridge_flow_ratio = 1
  260. bridge_speed = 20
  261. brim_width = 0
  262. complete_objects = 0
  263. default_acceleration = 0
  264. dont_support_bridges = 1
  265. external_fill_pattern = rectilinear
  266. external_perimeter_extrusion_width = 0
  267. external_perimeter_speed = 50%
  268. external_perimeters_first = 0
  269. extra_perimeters = 1
  270. extruder_clearance_height = 20
  271. extruder_clearance_radius = 20
  272. extrusion_width = 0
  273. fill_angle = 45
  274. fill_density = 20%
  275. fill_pattern = rectilinear
  276. first_layer_acceleration = 0
  277. first_layer_extrusion_width = 200%
  278. first_layer_height = 0.3
  279. first_layer_speed = 20
  280. gap_fill_speed = 20
  281. gcode_comments = 0
  282. infill_acceleration = 0
  283. infill_every_layers = 1
  284. infill_extruder = 1
  285. infill_extrusion_width = 0
  286. infill_first = 0
  287. infill_only_where_needed = 0
  288. infill_overlap = 15%
  289. infill_speed = 20
  290. interface_shells = 0
  291. layer_height = 0.2
  292. max_print_speed = 25
  293. max_volumetric_speed = 0
  294. min_skirt_length = 0
  295. notes =
  296. only_retract_when_crossing_perimeters = 1
  297. ooze_prevention = 0
  298. output_filename_format = [input_filename_base].gcode
  299. overhangs = 1
  300. perimeter_acceleration = 0
  301. perimeter_extruder = 1
  302. perimeter_extrusion_width = 0
  303. perimeter_speed = 20
  304. perimeters = 3
  305. post_process = d:\apps\gpx\gpx.bat
  306. raft_layers = 0
  307. resolution = 0
  308. seam_position = random
  309. skirt_distance = 6
  310. skirt_height = 1
  311. skirts = 0
  312. small_perimeter_speed = 15
  313. solid_infill_below_area = 70
  314. solid_infill_every_layers = 0
  315. solid_infill_extruder = 1
  316. solid_infill_extrusion_width = 0
  317. solid_infill_speed = 20
  318. spiral_vase = 0
  319. standby_temperature_delta = -10
  320. support_material = 0
  321. support_material_angle = 0
  322. support_material_contact_distance = 0.2
  323. support_material_enforce_layers = 0
  324. support_material_extruder = 1
  325. support_material_extrusion_width = 0
  326. support_material_interface_extruder = 1
  327. support_material_interface_layers = 3
  328. support_material_interface_spacing = 0
  329. support_material_interface_speed = 100%
  330. support_material_pattern = pillars
  331. support_material_spacing = 2.5
  332. support_material_speed = 60
  333. support_material_threshold = 0
  334. thin_walls = 1
  335. threads = 6
  336. top_infill_extrusion_width = 0
  337. top_solid_infill_speed = 15
  338. top_solid_layers = 3
  339. travel_speed = 80
  340. xy_size_compensation = -0.2
  341.  
  342. [printer:CTC Dual]
  343. bed_shape = -112x-72,113x-72,113x73,-112x73
  344. before_layer_gcode =
  345. end_gcode = M73 P100 ; end build progress\nG162 X Y F2500; home X and Y axes\nM109 S0 T0; set bed temperature to 0\nM104 S0 T0; set 1st extruder temperature to 0\nM104 S0 T1; set 2nd extruder temperature to 0\nM18; disable all stepper motors
  346. extruder_offset = 0x0,0x0
  347. gcode_flavor = sailfish
  348. layer_gcode =
  349. nozzle_diameter = 0.4,0.4
  350. octoprint_apikey =
  351. octoprint_host =
  352. pressure_advance = 0
  353. retract_before_travel = 2,2
  354. retract_layer_change = 0,0
  355. retract_length = 2,2
  356. retract_length_toolchange = 10,10
  357. retract_lift = 0,0
  358. retract_restart_extra = 0,0
  359. retract_restart_extra_toolchange = -0.5,-0.5
  360. retract_speed = 2000,200
  361. start_gcode = T0; set primary extruder\nM73 P0; enable show build progress\nM109 S[first_layer_bed_temperature] T0; heat bed up to first layer temperature\nM104 S[first_layer_temperature_0] T0; set nozzle heater to first layer temperature\nM104 S[first_layer_temperature_1] T1; set nozzle heater to first layer temperature\nM103; disable RPM\nG21; set units to mm\nG162 X Y F6000; home XY axes maximum\nG161 Z F9000; home Z axis minimum\nG92 X270 Y150 Z0; set Z to 0, X and Y to far right/back coordinates to force 0/0 to front left\nG90; set positioning to absolute\nG1 Z10; move Z to waiting height\nG1 X0 Y0 Z10 F14000; move to waiting position (front left corner of print bed)\nG130 X0 Y0 A0 B0; set stepper motor vref to lower value while heating\nM6 T0; wait for bed and extruder to heat up\nM6 T1; wait for bed and extruder to heat up\nT0; change to primary extruder\nG130 X127 Y127 A127 B127; set stepper motor vref to defaults\nM108 T0 R3; set extruder speed\nG92 X270 Y150 Z0; set Z to 0, X and Y to far right/back coordinates to force 0/0 to front left\nG90; use absolute coordinates\nM320; acceleration enabled for all commands that follow\nG1 Z[first_layer_height] F6000.000; move to first layer height\nG1 X200 Y0 F14000.000; move to front right corner of bed\nG1 X20 Y0 E24 F2000.000; extrude a line of filament across the front edge of the bed\nG4 P2000; wait for ooze to slow\n\nG1 E0 F5400; excute reverse extrusion to retract by length defined in printer settings\nG1 Z0 F6000.000; lower nozzle height to 0\nG1 X-95; wipe purged noodle on edge of bed\nG92 E0; set E to 0 for 1st extruder\nT1; switch to 2nd extruder\n\nG1 X200 Y0 F14000.000; move to front right corner of bed\nG1 X20 Y0 E24 F2000.000; extrude a line of filament across the front edge of the bed\nG4 P2000; wait for ooze to slow\n\nG1 Z0 F6000.000; lower nozzle height to 0\nG1 X0; wipe nozzle\nG1 Z[first_layer_height] F6000.000; set nozzle to first layer height\nG1 F12000; ensure fast travel to first print move\nG92 E0; set E to 0 again\nT0; switch back to first extruder\nM73 P0; reset build progress to 0\nM73 P0; set build progress to 0
  362. toolchange_gcode = T[next_extruder]
  363. use_firmware_retraction = 0
  364. use_relative_e_distances = 0
  365. use_volumetric_e = 0
  366. vibration_limit = 0
  367. wipe = 0,0
  368. z_offset = 0
  369.  
  370. [printer:CTC single left]
  371. bed_shape = -112x-72,113x-72,113x73,-112x73
  372. before_layer_gcode =
  373. end_gcode = M73 P100 ; end build progress\nG162 X Y F2500; home X and Y axes\nM18; disable all stepper motors\nM109 S0 T0; set bed temperature to 0\nM104 S0 T1; set extruder temperature to 0
  374. extruder_offset = 0x0,0x0
  375. gcode_flavor = sailfish
  376. layer_gcode =
  377. nozzle_diameter = 0.4,0.4
  378. octoprint_apikey =
  379. octoprint_host =
  380. pressure_advance = 0
  381. retract_before_travel = 2,2
  382. retract_layer_change = 0,0
  383. retract_length = 2,2
  384. retract_length_toolchange = 10,10
  385. retract_lift = 0,0
  386. retract_restart_extra = 0,0
  387. retract_restart_extra_toolchange = 0,0
  388. retract_speed = 4000,40
  389. start_gcode = T1; set primary extruder\nM73 P0; enable show build progress\nM109 S[first_layer_bed_temperature] T0; heat bed up to first layer temperature\nM104 S[first_layer_temperature_0] T0; set nozzle heater to first layer temperature\nM103; disable RPM\nG21; set units to mm\nG162 X Y F6000; home XY axes maximum\nG161 Z F9000; home Z axis minimum\nG92 X270 Y150 Z0; set Z to 0, X and Y to far right/back coordinates to force 0/0 to front left\nG90; set positioning to absolute\nG1 Z10; move Z to waiting height\nG1 X0 Y0 Z10 F14000; move to waiting position (front left corner of print bed)\nG130 X0 Y0 A0 B0; set stepper motor vref to lower value while heating\nM6 T1; wait for bed and extruder to heat up\nG130 X127 Y127 A127 B127; set stepper motor vref to defaults\nM108 T1 R3; set extruder speed\nG92 E0; set E to 0\nG90; use absolute coordinates\nM320; acceleration enabled for all commands that follow\nG1 Z[first_layer_height] F6000.000; move to first layer height\nG1 X200 Y0 F14000.000; move to front right corner of bed\nG1 X20 Y0 E24 F2000.000; extrude a line of filament across the front edge of the bed\nG4 P2000; wait for ooze to slow\nG1 Z0 F6000.000; lower nozzle height to 0\nG1 X0; wipe nozzle\nG1 Z[first_layer_height] F6000.000; set nozzle to first layer height\nG1 F12000; ensure fast travel to first print move\nG92 E0; set E to 0 again\nM73 P0; reset build progress to 0
  390. toolchange_gcode =
  391. use_firmware_retraction = 0
  392. use_relative_e_distances = 0
  393. use_volumetric_e = 0
  394. vibration_limit = 0
  395. wipe = 0,0
  396. z_offset = 0
  397.  
  398. [printer:CTC single right]
  399. bed_shape = 0x0,225x0,225x145,0x145
  400. before_layer_gcode =
  401. end_gcode = M73 P100 ; end build progress\nG162 X Y F2500; home X and Y axes\nM18; disable all stepper motors\nM109 S0 T0; set bed temperature to 0\nM104 S0 T0; set extruder temperature to 0
  402. extruder_offset = 0x0,0x0
  403. gcode_flavor = sailfish
  404. layer_gcode =
  405. nozzle_diameter = 0.4,0.4
  406. octoprint_apikey =
  407. octoprint_host =
  408. pressure_advance = 0
  409. retract_before_travel = 2,2
  410. retract_layer_change = 0,0
  411. retract_length = 2,2
  412. retract_length_toolchange = 10,10
  413. retract_lift = 0,0
  414. retract_restart_extra = 0,0
  415. retract_restart_extra_toolchange = 0,0
  416. retract_speed = 40,40
  417. start_gcode = T0; set primary extruder\nM73 P0; enable show build progress\nM109 S[first_layer_bed_temperature] T0; heat bed up to first layer temperature\nM104 S[first_layer_temperature_0] T0; set nozzle heater to first layer temperature\nM103; disable RPM\nG21; set units to mm\nG162 X Y F6000; home XY axes maximum\nG161 Z F9000; home Z axis minimum\nG92 X270 Y150 Z0; set Z to 0, X and Y to far right/back coordinates to force 0/0 to front left\nG90; set positioning to absolute\nG1 Z10; move Z to waiting height\nG1 X0 Y0 Z10 F14000; move to waiting position (front left corner of print bed)\nG130 X0 Y0 A0 B0; set stepper motor vref to lower value while heating\nM6 T0; wait for bed and extruder to heat up\nG130 X127 Y127 A127 B127; set stepper motor vref to defaults\nM108 T0 R3; set extruder speed\nG92 E0; set E to 0\nG90; use absolute coordinates\nM320; acceleration enabled for all commands that follow\nG1 Z[first_layer_height] F6000.000; move to first layer height\nG1 X200 Y0 F14000.000; move to front right corner of bed\nG1 X20 Y0 E24 F2000.000; extrude a line of filament across the front edge of the bed\nG4 P2000; wait for ooze to slow\nG1 Z0 F6000.000; lower nozzle height to 0\nG1 X0; wipe nozzle\nG1 Z[first_layer_height] F6000.000; set nozzle to first layer height\nG1 F12000; ensure fast travel to first print move\nG92 E0; set E to 0 again\nM73 P0; reset build progress to 0
  418. toolchange_gcode =
  419. use_firmware_retraction = 0
  420. use_relative_e_distances = 0
  421. use_volumetric_e = 0
  422. vibration_limit = 0
  423. wipe = 0,0
  424. z_offset = 0
  425.  
  426. [settings]
  427. autocenter = 1
  428. mode = expert
RAW Paste Data
Top