Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ################################################################################
- ## Raspberry Pi Configuration Settings
- ##
- ## Details taken from the eLinux wiki 2012/06/27
- ## For up-to-date information please refer to wiki page.
- ##
- ## Wiki Location : http://elinux.org/RPi_config.txt
- ##
- ################################################################################
- ################################################################################
- ## Standard Definition Video Settings
- ################################################################################
- ## sdtv_mode
- ## defines the TV standard for composite output
- ##
- ## Value Description
- ## -------------------------------------------------------------------------
- ## 0 Normal NTSC (Default)
- ## 1 Japanese version of NTSC - no pedestal
- ## 2 Normal PAL
- ## 3 Brazilian version of PAL - 525/60 rather than 625/50, different subcarrier
- ##
- #sdtv_mode=0
- ## sdtv_aspect
- ## defines the aspect ratio for composite output
- ##
- ## Value Description
- ## -------------------------------------------------------------------------
- ## 1 4:3 (Default)
- ## 2 14:9
- ## 3 16:9
- ##
- #sdtv_aspect=1
- ################################################################################
- ## High Definition Video Settings
- ################################################################################
- ## hdmi_safe
- ## Use "safe mode" settings to try to boot with maximum hdmi compatibility.
- ##
- ## Value Description
- ## -------------------------------------------------------------------------
- ## 0 Disabled (Default)
- ## 1 Enabled (this does: hdmi_force_hotplug=1, config_hdmi_boost=4, hdmi_group=1, hdmi_mode=1, disable_overscan=0)
- ##
- #hdmi_safe=1
- ## hdmi_force_hotplug
- ## overrides the normal selection of composite if no HDMI is detected
- ##
- ## Value Description
- ## -------------------------------------------------------------------------
- ## 0 Disabled (Default)
- ## 1 Use HDMI mode even if no HDMI monitor is detected
- ##
- #hdmi_force_hotplug=1
- ## hdmi_drive
- ## chooses between HDMI and DVI modes
- ##
- ## Value Description
- ## -------------------------------------------------------------------------
- ## 1 Normal DVI mode (No sound)
- ## 2 Normal HDMI mode (Sound will be sent if supported and enabled)
- ##
- #hdmi_drive=2
- ## hdmi_group
- ## defines the HDMI type
- ##
- ## [rgh] I think values are 0 and 1 really, and the default 0 for CEA - at least with the latest firmware as of May 25th 2012.
- ##
- ## Value Description
- ## -------------------------------------------------------------------------
- ## 1 CEA (Default)
- ## 2 DMT
- ##
- #hdmi_group=1
- ## hdmi_mode
- ## defines screen resolution in CEA or DMT format
- ##
- ## H means 16:9 variant (of a normally 4:3 mode).
- ## 2x means pixel doubled (i.e. higher clock rate, with each pixel repeated twice)
- ## 4x means pixel quadrupled (i.e. higher clock rate, with each pixel repeated four times)
- ##
- ## Value hdmi_group=CEA hdmi_group=DMT
- ## -------------------------------------------------------------------------
- ## 1 VGA 640x350 85Hz
- ## 2 480p 60Hz 640x400 85Hz
- ## 3 480p 60Hz H 720x400 85Hz
- ## 4 720p 60Hz 640x480 60Hz
- ## 5 1080i 60Hz 640x480 72Hz
- ## 6 480i 60Hz 640x480 75Hz
- ## 7 480i 60Hz H 640x480 85Hz
- ## 8 240p 60Hz 800x600 56Hz
- ## 9 240p 60Hz H 800x600 60Hz
- ## 10 480i 60Hz 4x 800x600 72Hz
- ## 11 480i 60Hz 4x H 800x600 75Hz
- ## 12 240p 60Hz 4x 800x600 85Hz
- ## 13 240p 60Hz 4x H 800x600 120Hz
- ## 14 480p 60Hz 2x 848x480 60Hz
- ## 15 480p 60Hz 2x H 1024x768 43Hz DO NOT USE
- ## 16 1080p 60Hz 1024x768 60Hz
- ## 17 576p 50Hz 1024x768 70Hz
- ## 18 576p 50Hz H 1024x768 75Hz
- ## 19 720p 50Hz 1024x768 85Hz
- ## 20 1080i 50Hz 1024x768 120Hz
- ## 21 576i 50Hz 1152x864 75Hz
- ## 22 576i 50Hz H 1280x768 reduced blanking
- ## 23 288p 50Hz 1280x768 60Hz
- ## 24 288p 50Hz H 1280x768 75Hz
- ## 25 576i 50Hz 4x 1280x768 85Hz
- ## 26 576i 50Hz 4x H 1280x768 120Hz reduced blanking
- ## 27 288p 50Hz 4x 1280x800 reduced blanking
- ## 28 288p 50Hz 4x H 1280x800 60Hz
- ## 29 576p 50Hz 2x 1280x800 75Hz
- ## 30 576p 50Hz 2x H 1280x800 85Hz
- ## 31 1080p 50Hz 1280x800 120Hz reduced blanking
- ## 32 1080p 24Hz 1280x960 60Hz
- ## 33 1080p 25Hz 1280x960 85Hz
- ## 34 1080p 30Hz 1280x960 120Hz reduced blanking
- ## 35 480p 60Hz 4x 1280x1024 60Hz
- ## 36 480p 60Hz 4x H 1280x1024 75Hz
- ## 37 576p 50Hz 4x 1280x1024 85Hz
- ## 38 576p 50Hz 4x H 1280x1024 120Hz reduced blanking
- ## 39 1080i 50Hz reduced blanking 1360x768 60Hz
- ## 40 1080i 100Hz 1360x768 120Hz reduced blanking
- ## 41 720p 100Hz 1400x1050 reduced blanking
- ## 42 576p 100Hz 1400x1050 60Hz
- ## 43 576p 100Hz H 1400x1050 75Hz
- ## 44 576i 100Hz 1400x1050 85Hz
- ## 45 576i 100Hz H 1400x1050 120Hz reduced blanking
- ## 46 1080i 120Hz 1440x900 reduced blanking
- ## 47 720p 120Hz 1440x900 60Hz
- ## 48 480p 120Hz 1440x900 75Hz
- ## 49 480p 120Hz H 1440x900 85Hz
- ## 50 480i 120Hz 1440x900 120Hz reduced blanking
- ## 51 480i 120Hz H 1600x1200 60Hz
- ## 52 576p 200Hz 1600x1200 65Hz
- ## 53 576p 200Hz H 1600x1200 70Hz
- ## 54 576i 200Hz 1600x1200 75Hz
- ## 55 576i 200Hz H 1600x1200 85Hz
- ## 56 480p 240Hz 1600x1200 120Hz reduced blanking
- ## 57 480p 240Hz H 1680x1050 reduced blanking
- ## 58 480i 240Hz 1680x1050 60Hz
- ## 59 480i 240Hz H 1680x1050 75Hz
- ## 60 1680x1050 85Hz
- ## 61 1680x1050 120Hz reduced blanking
- ## 62 1792x1344 60Hz
- ## 63 1792x1344 75Hz
- ## 64 1792x1344 120Hz reduced blanking
- ## 65 1856x1392 60Hz
- ## 66 1856x1392 75Hz
- ## 67 1856x1392 120Hz reduced blanking
- ## 68 1920x1200 reduced blanking
- ## 69 1920x1200 60Hz
- ## 70 1920x1200 75Hz
- ## 71 1920x1200 85Hz
- ## 72 1920x1200 120Hz reduced blanking
- ## 73 1920x1440 60Hz
- ## 74 1920x1440 75Hz
- ## 75 1920x1440 120Hz reduced blanking
- ## 76 2560x1600 reduced blanking
- ## 77 2560x1600 60Hz
- ## 78 2560x1600 75Hz
- ## 79 2560x1600 85Hz
- ## 80 2560x1600 120Hz reduced blanking
- ## 81 1366x768 60Hz
- ## 82 1080p 60Hz
- ## 83 1600x900 reduced blanking
- ## 84 2048x1152 reduced blanking
- ## 85 720p 60Hz
- ## 86 1366x768 reduced blanking
- ##
- #hdmi_mode=1
- ## hdmi_force_hotplug
- ## Make RPi ignore hotplug signal from display and assume it is asserted.
- ##
- #hdmi_force_hotplug=0
- ## config_hdmi_boost
- ## configure the signal strength of the HDMI interface.
- ##
- ## Value Description
- ## -------------------------------------------------------------------------
- ## 0 (Default)
- ## 1
- ## 2
- ## 3
- ## 4 Try if you have interference issues with HDMI
- ## 5
- ## 6
- ## 7 Maximum
- ##
- #config_hdmi_boost=0
- ################################################################################
- ## Overscan Video Settings
- ################################################################################
- ## overscan_left
- ## number of pixels to skip on left
- ##
- #overscan_left=0
- ## overscan_right
- ## number of pixels to skip on right
- ##
- #overscan_right=0
- ## overscan_top
- ## number of pixels to skip on top
- ##
- #overscan_top=0
- ## overscan_bottom
- ## number of pixels to skip on bottom
- ##
- #overscan_bottom=0
- ## disable_overscan
- ## set to 1 to disable overscan
- ##
- ## Value Description
- ## -------------------------------------------------------------------------
- ## 0 Overscan Enabled (Default)
- ## 1 Overscan Disabled
- ##
- #disable_overscan=1
- ################################################################################
- ## Framebuffer Video Settings
- ################################################################################
- ## framebuffer_width
- ## console framebuffer width in pixels. Default is display width minus overscan.
- ##
- #framebuffer_width=0
- ## framebuffer_height
- ## console framebuffer height in pixels. Default is display height minus overscan.
- ##
- #framebuffer_height=0
- ## framebuffer_depth
- ## console framebuffer depth in bits per pixel.
- ##
- ## Value Description
- ## -------------------------------------------------------------------------
- ## 8 valid, but default RGB palette makes an unreadable screen
- ## 16 (Default)
- ## 24 looks better but has corruption issues as of 2012/06/15
- ## 32 has no corruption issues but needs framebuffer_ignore_alpha=1 and shows the wrong colors as of 2012/06/15
- ##
- #framebuffer_height=16
- ## framebuffer_ignore_alpha
- ## set to 1 to disable alpha channel. Helps with 32bit.
- ##
- ## Value Description
- ## -------------------------------------------------------------------------
- ## 0 Enable Alpha Channel (Default)
- ## 1 Disable Alpha Channel
- ##
- #framebuffer_ignore_alpha=0
- ################################################################################
- ## Test Settings
- ################################################################################
- ## test_mode
- ## enable test sound/image during boot for manufacturing test.
- ##
- ## Value Description
- ## -------------------------------------------------------------------------
- ## 0 Disable Test Mod (Default)
- ## 1 Enable Test Mode
- ##
- #test_mode=0
- ################################################################################
- ## Cache Settings
- ################################################################################
- ## disable_l2cache
- ## disable arm access to GPU's L2 cache. Needs corresponding L2 disabled kernel.
- ##
- ## Value Description
- ## -------------------------------------------------------------------------
- ## 0 Enable L2 Cache (Default)
- ## 1 Disable L2 cache
- ##
- #disable_l2cache=0
- ################################################################################
- ## Boot Option Settings
- ################################################################################
- ## disable_commandline_tags
- ## Stops start.elf from filling in ATAGS (memory from 0x100) before launching kernel
- ##
- #disable_commandline_tags=0
- ## cmdline (string)
- ## Command line parameters. Can be used instead of cmdline.txt file
- ##
- #cmdline=""
- ## kernel (string)
- ## Alternative name to use when loading kernel.
- ##
- #kernel=""
- ## kernel_address
- ## address to load kernel.img file at
- ##
- #kernel_address=0x00000000
- ## ramfsfile (string)
- ## ramfs file to load
- ##
- #ramfsfile=""
- ## device_tree_address
- ## address to load device_tree at
- ##
- #device_tree_address=0x00000000
- ## init_uart_baud
- ## initial uart baud rate. Default 115200
- ##
- #init_uart_baud=115200
- ## init_uart_clock
- ## initial uart clock. Default 3000000
- ##
- #init_uart_clock=3000000
- ## init_emmc_clock
- ## initial emmc clock. Default 50000000 (50mhz default. increasing this can speedup your SD-card)
- ##
- #init_emmc_clock=50000000
- ## boot_delay
- ## Waits for given number of seconds in start.elf before loading kernel.img.
- ##
- #boot_delay=0
- ################################################################################
- ## Overclocking Settings
- ################################################################################
- ## arm_freq
- ## frequency of ARM in MHz. Default 700.
- ##
- #arm_freq=700
- ## gpu_freq
- ## Sets core_freq, h264_freq, isp_freq, v3d_freq together.
- ##
- #gpu_freq=250
- ## core_freq
- ## frequency of GPU processor core in MHz. Default 250.
- ##
- #core_freq=250
- ## h264_freq
- ## frequency of hardware video block in MHz. Default 250.
- ##
- #h264_freq=250
- ## isp_freq
- ## frequency of image sensor pipeline block in MHz. Default 250.
- ##
- #isp_freq=250
- ## v3d_freq
- ## frequency of 3D block in MHz. Default 250.
- ##
- #v3d_freq=250
- ## sdram_freq
- ## frequency of SDRAM in MHz. Default 400.
- ##
- #sdram_freq=400
- ################################################################################
- ## Voltage Settings
- ##
- ## WARNING: Setting any of the parameters which over volt your Raspberry Pi
- ## will set a permanent bit within the SOC and your warranty is void. So If
- ## you care about the warranty do not adjust voltage.
- ##
- ################################################################################
- ## over_voltage
- ## ARM/GPU core voltage adjust.
- ##
- ## Value Description
- ## -------------------------------------------------------------------------
- ## -16 0.8 V
- ## -15 0.825 V
- ## -14 0.85 V
- ## -13 0.875 V
- ## -12 0.9 V
- ## -11 0.925 V
- ## -10 0.95 V
- ## -9 0.975 V
- ## -8 1.0 V
- ## -7 1.025 V
- ## -6 1.05 V
- ## -5 1.075 V
- ## -4 1.1 V
- ## -3 1.125 V
- ## -2 1.15 V
- ## -1 1.175 V
- ## 0 1.2 V (Default)
- ## 1 1.225 V
- ## 2 1.25 V
- ## 3 1.275 V
- ## 4 1.3 V
- ## 5 1.325 V
- ## 6 1.35 V
- ## 7 1.375 V
- ## 8 1.4 V
- ##
- #over_voltage=0
- ## over_voltage_sdram
- ## Sets over_voltage_sdram_c, over_voltage_sdram_i, over_voltage_sdram_p together
- ##
- ## Value Description
- ## -------------------------------------------------------------------------
- ## -16 0.8 V
- ## -15 0.825 V
- ## -14 0.85 V
- ## -13 0.875 V
- ## -12 0.9 V
- ## -11 0.925 V
- ## -10 0.95 V
- ## -9 0.975 V
- ## -8 1.0 V
- ## -7 1.025 V
- ## -6 1.05 V
- ## -5 1.075 V
- ## -4 1.1 V
- ## -3 1.125 V
- ## -2 1.15 V
- ## -1 1.175 V
- ## 0 1.2 V (Default)
- ## 1 1.225 V
- ## 2 1.25 V
- ## 3 1.275 V
- ## 4 1.3 V
- ## 5 1.325 V
- ## 6 1.35 V
- ## 7 1.375 V
- ## 8 1.4 V
- ##
- #over_voltage_sdram=0
- ## over_voltage_sdram_c
- ## SDRAM controller voltage adjust.
- ##
- ## Value Description
- ## -------------------------------------------------------------------------
- ## -16 0.8 V
- ## -15 0.825 V
- ## -14 0.85 V
- ## -13 0.875 V
- ## -12 0.9 V
- ## -11 0.925 V
- ## -10 0.95 V
- ## -9 0.975 V
- ## -8 1.0 V
- ## -7 1.025 V
- ## -6 1.05 V
- ## -5 1.075 V
- ## -4 1.1 V
- ## -3 1.125 V
- ## -2 1.15 V
- ## -1 1.175 V
- ## 0 1.2 V (Default)
- ## 1 1.225 V
- ## 2 1.25 V
- ## 3 1.275 V
- ## 4 1.3 V
- ## 5 1.325 V
- ## 6 1.35 V
- ## 7 1.375 V
- ## 8 1.4 V
- ##
- #over_voltage_sdram_c=0
- ## over_voltage_sdram_i
- ## SDRAM I/O voltage adjust.
- ##
- ## Value Description
- ## -------------------------------------------------------------------------
- ## -16 0.8 V
- ## -15 0.825 V
- ## -14 0.85 V
- ## -13 0.875 V
- ## -12 0.9 V
- ## -11 0.925 V
- ## -10 0.95 V
- ## -9 0.975 V
- ## -8 1.0 V
- ## -7 1.025 V
- ## -6 1.05 V
- ## -5 1.075 V
- ## -4 1.1 V
- ## -3 1.125 V
- ## -2 1.15 V
- ## -1 1.175 V
- ## 0 1.2 V (Default)
- ## 1 1.225 V
- ## 2 1.25 V
- ## 3 1.275 V
- ## 4 1.3 V
- ## 5 1.325 V
- ## 6 1.35 V
- ## 7 1.375 V
- ## 8 1.4 V
- ##
- #over_voltage_sdram_i=0
- ## over_voltage_sdram_p
- ## SDRAM phy voltage adjust.
- ##
- ## Value Description
- ## -------------------------------------------------------------------------
- ## -16 0.8 V
- ## -15 0.825 V
- ## -14 0.85 V
- ## -13 0.875 V
- ## -12 0.9 V
- ## -11 0.925 V
- ## -10 0.95 V
- ## -9 0.975 V
- ## -8 1.0 V
- ## -7 1.025 V
- ## -6 1.05 V
- ## -5 1.075 V
- ## -4 1.1 V
- ## -3 1.125 V
- ## -2 1.15 V
- ## -1 1.175 V
- ## 0 1.2 V (Default)
- ## 1 1.225 V
- ## 2 1.25 V
- ## 3 1.275 V
- ## 4 1.3 V
- ## 5 1.325 V
- ## 6 1.35 V
- ## 7 1.375 V
- ## 8 1.4 V
- ##
- #over_voltage_sdram_p=0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement