daily pastebin goal
23%
SHARE
TWEET

Untitled

a guest Oct 12th, 2018 69 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. libre@libre-computer:~$ dmesg
  2. [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  3. [    0.000000] Linux version 4.18.12-01664-g188913c4a529-dirty (dxue@dxue-thinkpad-x1-carbon) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05)) #12 SMP PREEMPT Thu Oct 4 06:42:58 EDT 2018
  4. [    0.000000] Machine model: Libre Computer Board AML-S905X-CC
  5. [    0.000000] efi: Getting EFI parameters from FDT:
  6. [    0.000000] efi: UEFI not found.
  7. [    0.000000] Reserved memory: created CMA memory pool at 0x000000002dc00000, size 256 MiB
  8. [    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  9. [    0.000000] NUMA: No NUMA configuration found
  10. [    0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x000000003fffffff]
  11. [    0.000000] NUMA: NODE_DATA [mem 0x3ffcb600-0x3ffcccff]
  12. [    0.000000] Zone ranges:
  13. [    0.000000]   DMA32    [mem 0x0000000001000000-0x000000003fffffff]
  14. [    0.000000]   Normal   empty
  15. [    0.000000] Movable zone start for each node
  16. [    0.000000] Early memory node ranges
  17. [    0.000000]   node   0: [mem 0x0000000001000000-0x0000000004ffffff]
  18. [    0.000000]   node   0: [mem 0x0000000005300000-0x000000000fffffff]
  19. [    0.000000]   node   0: [mem 0x0000000010200000-0x000000003fffffff]
  20. [    0.000000] Initmem setup node 0 [mem 0x0000000001000000-0x000000003fffffff]
  21. [    0.000000] On node 0 totalpages: 256768
  22. [    0.000000]   DMA32 zone: 4032 pages used for memmap
  23. [    0.000000]   DMA32 zone: 0 pages reserved
  24. [    0.000000]   DMA32 zone: 256768 pages, LIFO batch:31
  25. [    0.000000] psci: probing for conduit method from DT.
  26. [    0.000000] psci: PSCIv0.2 detected in firmware.
  27. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  28. [    0.000000] psci: Trusted OS migration not required
  29. [    0.000000] random: get_random_bytes called from start_kernel+0xa8/0x418 with crng_init=0
  30. [    0.000000] percpu: Embedded 21 pages/cpu @(____ptrval____) s47896 r8192 d29928 u86016
  31. [    0.000000] pcpu-alloc: s47896 r8192 d29928 u86016 alloc=21*4096
  32. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  33. [    0.000000] Detected VIPT I-cache on CPU0
  34. [    0.000000] CPU features: enabling workaround for ARM erratum 845719
  35. [    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
  36. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 252736
  37. [    0.000000] Policy zone: DMA32
  38. [    0.000000] Kernel command line: root=/dev/mmcblk1p2 rootfstype=btrfs rootflags=subvol=@ rootwait console=ttyAML0,115200 no_console_suspend
  39. [    0.000000] Memory: 730112K/1027072K available (11580K kernel code, 916K rwdata, 3880K rodata, 1024K init, 376K bss, 34816K reserved, 262144K cma-reserved)
  40. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  41. [    0.000000] Preemptible hierarchical RCU implementation.
  42. [    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  43. [    0.000000]  Tasks RCU enabled.
  44. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  45. [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  46. [    0.000000] GIC: Using split EOI/Deactivate mode
  47. [    0.000000] irq_meson_gpio: 110 to 8 gpio interrupt mux initialized
  48. [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  49. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  50. [    0.000003] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  51. [    0.000469] Console: colour dummy device 80x25
  52. [    0.000527] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  53. [    0.000536] pid_max: default: 32768 minimum: 301
  54. [    0.000596] Security Framework initialized
  55. [    0.000604] AppArmor: AppArmor disabled by boot time parameter
  56. [    0.000965] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
  57. [    0.001144] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
  58. [    0.001169] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes)
  59. [    0.001181] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes)
  60. [    0.024008] ASID allocator initialised with 32768 entries
  61. [    0.031993] Hierarchical SRCU implementation.
  62. [    0.040842] EFI services will not be available.
  63. [    0.048038] smp: Bringing up secondary CPUs ...
  64. [    0.080237] Detected VIPT I-cache on CPU1
  65. [    0.080283] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  66. [    0.112282] Detected VIPT I-cache on CPU2
  67. [    0.112315] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  68. [    0.144336] Detected VIPT I-cache on CPU3
  69. [    0.144371] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  70. [    0.144436] smp: Brought up 1 node, 4 CPUs
  71. [    0.144455] SMP: Total of 4 processors activated.
  72. [    0.144462] CPU features: detected: 32-bit EL0 Support
  73. [    0.147788] CPU: All CPU(s) started at EL2
  74. [    0.147804] alternatives: patching kernel code
  75. [    0.148602] devtmpfs: initialized
  76. [    0.152751] Registered cp15_barrier emulation handler
  77. [    0.152766] Registered setend emulation handler
  78. [    0.153020] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  79. [    0.153054] futex hash table entries: 1024 (order: 4, 65536 bytes)
  80. [    0.159081] xor: measuring software checksum speed
  81. [    0.196321]    8regs     :  2303.000 MB/sec
  82. [    0.236347]    8regs_prefetch:  2052.000 MB/sec
  83. [    0.276378]    32regs    :  2831.000 MB/sec
  84. [    0.316406]    32regs_prefetch:  2379.000 MB/sec
  85. [    0.316412] xor: using function: 32regs (2831.000 MB/sec)
  86. [    0.316424] pinctrl core: initialized pinctrl subsystem
  87. [    0.317167] DMI not present or invalid.
  88. [    0.317440] NET: Registered protocol family 16
  89. [    0.317776] audit: initializing netlink subsys (disabled)
  90. [    0.317882] audit: type=2000 audit(0.316:1): state=initialized audit_enabled=0 res=1
  91. [    0.319105] cpuidle: using governor menu
  92. [    0.319346] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
  93. [    0.319360] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  94. [    0.320274] DMA: preallocated 256 KiB pool for atomic allocations
  95. [    0.320989] Serial: AMBA PL011 UART driver
  96. [    0.337103] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  97. [    0.337453] cryptd: max_cpu_qlen set to 1000
  98. [    0.404671] raid6: int64x1  gen()   477 MB/s
  99. [    0.472664] raid6: int64x1  xor()   448 MB/s
  100. [    0.540720] raid6: int64x2  gen()   727 MB/s
  101. [    0.608759] raid6: int64x2  xor()   613 MB/s
  102. [    0.676796] raid6: int64x4  gen()  1085 MB/s
  103. [    0.744871] raid6: int64x4  xor()   776 MB/s
  104. [    0.812941] raid6: int64x8  gen()  1004 MB/s
  105. [    0.880981] raid6: int64x8  xor()   758 MB/s
  106. [    0.949028] raid6: neonx1   gen()   759 MB/s
  107. [    1.017074] raid6: neonx1   xor()   868 MB/s
  108. [    1.085130] raid6: neonx2   gen()  1224 MB/s
  109. [    1.153154] raid6: neonx2   xor()  1235 MB/s
  110. [    1.221217] raid6: neonx4   gen()  1586 MB/s
  111. [    1.289247] raid6: neonx4   xor()  1481 MB/s
  112. [    1.357334] raid6: neonx8   gen()  1725 MB/s
  113. [    1.425351] raid6: neonx8   xor()  1572 MB/s
  114. [    1.425355] raid6: using algorithm neonx8 gen() 1725 MB/s
  115. [    1.425359] raid6: .... xor() 1572 MB/s, rmw enabled
  116. [    1.425364] raid6: using neon recovery algorithm
  117. [    1.425736] ACPI: Interpreter disabled.
  118. [    1.427089] vgaarb: loaded
  119. [    1.427332] SCSI subsystem initialized
  120. [    1.427527] libata version 3.00 loaded.
  121. [    1.427876] usbcore: registered new interface driver usbfs
  122. [    1.427925] usbcore: registered new interface driver hub
  123. [    1.428001] usbcore: registered new device driver usb
  124. [    1.428417] pps_core: LinuxPPS API ver. 1 registered
  125. [    1.428426] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  126. [    1.428448] PTP clock support registered
  127. [    1.428666] EDAC MC: Ver: 3.0.0
  128. [    1.429374] Advanced Linux Sound Architecture Driver Initialized.
  129. [    1.430109] clocksource: Switched to clocksource arch_sys_counter
  130. [    1.430264] VFS: Disk quotas dquot_6.6.0
  131. [    1.430309] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  132. [    1.430577] pnp: PnP ACPI: disabled
  133. [    1.436223] NET: Registered protocol family 2
  134. [    1.436578] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes)
  135. [    1.436677] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
  136. [    1.436754] TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
  137. [    1.436854] TCP: Hash tables configured (established 8192 bind 8192)
  138. [    1.436952] UDP hash table entries: 512 (order: 2, 16384 bytes)
  139. [    1.436980] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  140. [    1.437092] NET: Registered protocol family 1
  141. [    1.437407] RPC: Registered named UNIX socket transport module.
  142. [    1.437414] RPC: Registered udp transport module.
  143. [    1.437418] RPC: Registered tcp transport module.
  144. [    1.437422] RPC: Registered tcp NFSv4.1 backchannel transport module.
  145. [    1.437431] PCI: CLS 0 bytes, default 64
  146. [    1.438169] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  147. [    1.438431] kvm [1]: 8-bit VMID
  148. [    1.439192] kvm [1]: vgic interrupt IRQ1
  149. [    1.439280] kvm [1]: Hyp mode initialized successfully
  150. [    1.441823] Initialise system trusted keyrings
  151. [    1.441954] workingset: timestamp_bits=45 max_order=18 bucket_order=0
  152. [    1.447674] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  153. [    1.448325] NFS: Registering the id_resolver key type
  154. [    1.448350] Key type id_resolver registered
  155. [    1.448355] Key type id_legacy registered
  156. [    1.448366] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  157. [    1.448515] SGI XFS with ACLs, security attributes, realtime, no debug enabled
  158. [    1.449805] 9p: Installing v9fs 9p2000 file system support
  159. [    1.450411] pstore: using deflate compression
  160. [    1.453377] Key type asymmetric registered
  161. [    1.453388] Asymmetric key parser 'x509' registered
  162. [    1.453474] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  163. [    1.453576] io scheduler noop registered
  164. [    1.453583] io scheduler deadline registered (default)
  165. [    1.453725] io scheduler cfq registered
  166. [    1.453732] io scheduler mq-deadline registered (default)
  167. [    1.453737] io scheduler kyber registered
  168. [    1.453836] io scheduler bfq registered
  169. [    1.459251] EINJ: ACPI disabled.
  170. [    1.466231] soc soc0: Amlogic Meson GXL (S905X) Revision 21:b (82:2) Detected
  171. [    1.470225] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  172. [    1.472292] c81004c0.serial: ttyAML0 at MMIO 0xc81004c0 (irq = 12, base_baud = 1500000) is a meson_uart
  173. [    2.359771] console [ttyAML0] enabled
  174. [    2.370926] loop: module loaded
  175. [    2.373469] libphy: Fixed MDIO Bus: probed
  176. [    2.373928] tun: Universal TUN/TAP device driver, 1.6
  177. [    2.378260] thunder_xcv, ver 1.0
  178. [    2.380728] thunder_bgx, ver 1.0
  179. [    2.383942] nicpf, ver 1.0
  180. [    2.387079] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  181. [    2.392356] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  182. [    2.398276] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
  183. [    2.405107] igb: Copyright (c) 2007-2014 Intel Corporation.
  184. [    2.410684] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
  185. [    2.418390] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  186. [    2.424449] sky2: driver version 1.30
  187. [    2.428319] VFIO - User Level meta-driver version: 0.3
  188. [    2.434160] dwc3 c9000000.dwc3: Failed to get clk 'ref': -2
  189. [    2.439833] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  190. [    2.444963] ehci-pci: EHCI PCI platform driver
  191. [    2.449411] ehci-platform: EHCI generic platform driver
  192. [    2.454724] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  193. [    2.460674] ohci-pci: OHCI PCI platform driver
  194. [    2.465108] ohci-platform: OHCI generic platform driver
  195. [    2.470903] usbcore: registered new interface driver usb-storage
  196. [    2.478444] i2c /dev entries driver
  197. [    2.481438] sdhci: Secure Digital Host Controller Interface driver
  198. [    2.485757] sdhci: Copyright(c) Pierre Ossman
  199. [    2.490341] Synopsys Designware Multimedia Card Interface Driver
  200. [    2.497385] meson-gx-mmc d0074000.mmc: allocated mmc-pwrseq
  201. [    2.527572] sdhci-pltfm: SDHCI platform and OF driver helper
  202. [    2.528834] ledtrig-cpu: registered to indicate activity on CPUs
  203. [    2.534236] meson-sm: secure-monitor enabled
  204. [    2.538035] hidraw: raw HID events driver (C) Jiri Kosina
  205. [    2.543354] usbcore: registered new interface driver usbhid
  206. [    2.548733] usbhid: USB HID core driver
  207. [    2.552446] meson-gx-mmc d0074000.mmc: no support for card's volts
  208. [    2.554502] platform-mhu c883c404.mailbox: Platform MHU Mailbox registered
  209. [    2.558573] mmc0: error -22 whilst initialising SDIO card
  210. [    2.569207] NET: Registered protocol family 17
  211. [    2.575297] 9pnet: Installing 9P2000 support
  212. [    2.579527] Key type dns_resolver registered
  213. [    2.584469] meson-gx-mmc d0074000.mmc: no support for card's volts
  214. [    2.584472] registered taskstats version 1
  215. [    2.584477] Loading compiled-in X.509 certificates
  216. [    2.589706] mmc0: error -22 whilst initialising MMC card
  217. [    2.594301] zswap: loaded using pool lz4/z3fold
  218. [    2.609343] Btrfs loaded, crc32c=crc32c-generic
  219. [    2.622880] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  220. [    2.622928] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  221. [    2.630921] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x0000000002010010
  222. [    2.639689] xhci-hcd xhci-hcd.0.auto: irq 33, io mem 0xc9000000
  223. [    2.646180] hub 1-0:1.0: USB hub found
  224. [    2.649244] hub 1-0:1.0: 2 ports detected
  225. [    2.653448] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  226. [    2.658631] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  227. [    2.666213] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0  SuperSpeed
  228. [    2.672818] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  229. [    2.681234] hub 2-0:1.0: USB hub found
  230. [    2.684524] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
  231. [    2.692516] meson-gx-mmc d0072000.mmc: Got CD GPIO
  232. [    2.723437] scpi_protocol scpi: SCP Protocol legacy pre-1.0 firmware
  233. [    2.736003] hctosys: unable to open rtc device (rtc0)
  234. [    2.736031] of_cfs_init
  235. [    2.737892] of_cfs_init: OK
  236. [    2.740841] VDDIO_BOOT: disabling
  237. [    2.743908] ALSA device list:
  238. [    2.746822]   No soundcards found.
  239. [    2.755970] Waiting for root device /dev/mmcblk1p2...
  240. [    2.770775] mmc1: new high speed SDHC card at address aaaa
  241. [    2.771512] mmcblk1: mmc1:aaaa SL16G 14.8 GiB
  242. [    2.777160]  mmcblk1: p1 p2 p3
  243. [    2.790006] BTRFS: device label SYSTEM devid 1 transid 8677 /dev/root
  244. [    2.792213] BTRFS info (device mmcblk1p2): disk space caching is enabled
  245. [    2.797455] BTRFS info (device mmcblk1p2): has skinny extents
  246. [    2.825450] BTRFS info (device mmcblk1p2): enabling ssd optimizations
  247. [    2.986126] usb 1-1: new high-speed USB device number 2 using xhci-hcd
  248. [    3.011676] random: fast init done
  249. [    3.056603] VFS: Mounted root (btrfs filesystem) readonly on device 0:16.
  250. [    3.061099] devtmpfs: mounted
  251. [    3.061458] Freeing unused kernel memory: 1024K
  252. [    3.185173] hub 1-1:1.0: USB hub found
  253. [    3.185471] hub 1-1:1.0: 4 ports detected
  254. [    3.378140] usb 1-2: new full-speed USB device number 3 using xhci-hcd
  255. [    3.499999] systemd[1]: System time before build time, advancing clock.
  256. [    3.556033] input: SHANWAN PS3/PC Gamepad as /devices/platform/soc/soc:usb@c9000000/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-2/1-2:1.0/0003:2563:0575.0001/input/input0
  257. [    3.565221] hid-generic 0003:2563:0575.0001: input,hidraw0: USB HID v1.10 Gamepad [SHANWAN PS3/PC Gamepad] on usb-xhci-hcd.0.auto-2/input0
  258. [    3.590548] NET: Registered protocol family 10
  259. [    3.591115] Segment Routing with IPv6
  260. [    3.610150] usb 1-1.1: new full-speed USB device number 4 using xhci-hcd
  261. [    3.626193] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  262. [    3.642154] systemd[1]: Detected architecture arm64.
  263. [    3.670942] systemd[1]: Set hostname to <libre-computer>.
  264. [    3.709907] systemd-gpt-auto-generator[1285]: Failed to determine block device of root file system: No such file or directory
  265. [    3.812437] systemd[1279]: /lib/systemd/system-generators/systemd-gpt-auto-generator failed with exit status 1.
  266. [    3.827087] input: Xiaoji Gamesir-G3w as /devices/platform/soc/soc:usb@c9000000/c9000000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:05AC:055B.0002/input/input1
  267. [    3.836677] hid-generic 0003:05AC:055B.0002: input,hidraw1: USB HID v1.10 Gamepad [Xiaoji Gamesir-G3w] on usb-xhci-hcd.0.auto-1.1/input0
  268. [    3.856026] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
  269. [    3.867384] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
  270. [    3.930149] usb 1-1.2: new full-speed USB device number 5 using xhci-hcd
  271. [    3.974931] random: systemd: uninitialized urandom read (16 bytes read)
  272. [    3.976204] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  273. [    4.002295] random: systemd: uninitialized urandom read (16 bytes read)
  274. [    4.003829] systemd[1]: Created slice User and Session Slice.
  275. [    4.026223] random: systemd: uninitialized urandom read (16 bytes read)
  276. [    4.027231] systemd[1]: Reached target Remote File Systems.
  277. [    4.050820] systemd[1]: Created slice System Slice.
  278. [    4.642149] usb 1-1.3: new full-speed USB device number 6 using xhci-hcd
  279. [    4.753560] BTRFS info (device mmcblk1p2): use zstd compression, level 0
  280. [    4.753572] BTRFS info (device mmcblk1p2): disk space caching is enabled
  281. [    4.846873] systemd-journald[1303]: Received request to flush runtime journal from PID 1
  282. [    4.956754] systemd-journald[1303]: File /var/log/journal/ef39522ea365412c8d1477577fb1328c/system.journal corrupted or uncleanly shut down, renaming and replacing.
  283. [    5.398512] meson-audio-core c1105400.audio: Failed to create c1105400.audio debugfs directory
  284. [    5.481898] usb 1-2: USB disconnect, device number 3
  285. [    5.489666] usb 1-1.1: USB disconnect, device number 4
  286. [    5.600165] Registered IR keymap rc-empty
  287. [    5.600260] rc rc0: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc/rc0
  288. [    5.600360] input: meson-ir as /devices/platform/soc/c8100000.bus/c8100580.ir/rc/rc0/input2
  289. [    5.602462] rc rc0: lirc_dev: driver meson-ir registered at minor = 0, raw IR receiver, no transmitter
  290. [    5.603802] meson-ir c8100580.ir: receiver initialized
  291. [    5.666721] mali: loading out-of-tree module taints kernel.
  292. [    5.670387] meson8b-dwmac c9410000.ethernet: PTP uses main clock
  293. [    5.670396] meson8b-dwmac c9410000.ethernet: no reset control found
  294. [    5.671024] meson8b-dwmac c9410000.ethernet: User ID: 0x11, Synopsys ID: 0x37
  295. [    5.671034] meson8b-dwmac c9410000.ethernet:         DWMAC1000
  296. [    5.671038] meson8b-dwmac c9410000.ethernet: DMA HW capability register supported
  297. [    5.671042] meson8b-dwmac c9410000.ethernet: RX Checksum Offload Engine supported
  298. [    5.671045] meson8b-dwmac c9410000.ethernet: COE Type 2
  299. [    5.671048] meson8b-dwmac c9410000.ethernet: TX Checksum insertion supported
  300. [    5.671052] meson8b-dwmac c9410000.ethernet: Wake-Up On Lan supported
  301. [    5.671088] meson8b-dwmac c9410000.ethernet: Normal descriptors
  302. [    5.671092] meson8b-dwmac c9410000.ethernet: Ring mode enabled
  303. [    5.671097] meson8b-dwmac c9410000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  304. [    5.671228] libphy: stmmac: probed
  305. [    5.672156] libphy: mdio_mux: probed
  306. [    5.688833] meson-drm d0100000.vpu: Queued 2 outputs on vpu
  307. [    5.710656] libphy: mdio_mux: probed
  308. [    5.714527] meson-drm d0100000.vpu: Failed to create d0100000.vpu debugfs directory
  309. [    5.714556] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  310. [    5.714559] [drm] No driver support for vblank timestamp query.
  311. [    5.714680] meson-drm d0100000.vpu: CVBS Output connector not available
  312. [    5.742414] meson-dw-hdmi c883a000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
  313. [    5.747639] meson-dw-hdmi c883a000.hdmi-tx: registered DesignWare HDMI I2C bus driver
  314. [    5.748447] meson-drm d0100000.vpu: bound c883a000.hdmi-tx (ops meson_dw_hdmi_ops [meson_dw_hdmi])
  315. [    5.798149] Registered IR keymap rc-cec
  316. [    5.798300] rc rc1: RC for meson_ao_cec as /devices/platform/soc/c8100000.bus/c8100100.cec/rc/rc1
  317. [    5.798505] input: RC for meson_ao_cec as /devices/platform/soc/c8100000.bus/c8100100.cec/rc/rc1/input3
  318. [    5.806155] Mali<2>:
  319. [    5.806163] Inserting Mali v900 device driver.
  320. [    5.806164] Mali<2>:
  321. [    5.806166] Compiled: Oct  4 2018, time: 06:24:40.
  322. [    5.806168] Mali<2>:
  323. [    5.806169] Driver revision: r7p0-00rel1-bab94ac
  324. [    5.806171] Mali<2>:
  325. [    5.806172] mali_module_init() registering device
  326. [    5.807103] Amlogic Mali glue initialized
  327. [    5.807109] Mali<2>:
  328. [    5.807111] mali_module_init() registering driver
  329. [    5.807305] Mali<2>:
  330. [    5.807311] mali_probe(): Called for platform device mali-utgard
  331. [    5.807395] Mali<2>:
  332. [    5.807400] Mali SWAP: Swap out threshold vaule is 60M
  333. [    5.807415] Mali<2>:
  334. [    5.807417] Mali memory settings (shared: 0x10000000)
  335. [    5.807419] Mali<2>:
  336. [    5.807422] Using device defined frame buffer settings (0xFFFFF000@0x00000000)
  337. [    5.807423] Mali<2>:
  338. [    5.807426] Memory Validator installed for Mali physical address base=0x00000000, size=0xFFFFF000
  339. [    5.807432] Mali<2>:
  340. [    5.807434] Mali PMU: Creating Mali PMU core
  341. [    5.807488] Mali<2>:
  342. [    5.807490] Get pmu config from platform device data.
  343. [    5.807492] Mali<2>:
  344. [    5.807493] Using customer pmu config:
  345. [    5.807494] Mali<2>:
  346. [    5.807497] domain_config[0] = 0x1
  347. [    5.807498] Mali<2>:
  348. [    5.807500] domain_config[1] = 0x2
  349. [    5.807501] Mali<2>:
  350. [    5.807503] domain_config[2] = 0x4
  351. [    5.807504] Mali<2>:
  352. [    5.807506] domain_config[3] = 0x4
  353. [    5.807507] Mali<2>:
  354. [    5.807509] domain_config[9] = 0x1
  355. [    5.807510] Mali<2>:
  356. [    5.807512] domain_config[10] = 0x2
  357. [    5.807515] Mali<2>:
  358. [    5.807517] Mali PM domain: Creating Mali PM domain (mask=0x00000001)
  359. [    5.807526] Mali<2>:
  360. [    5.807528] Mali PM domain: Creating Mali PM domain (mask=0x00000002)
  361. [    5.807529] Mali<2>:
  362. [    5.807531] Mali PM domain: Creating Mali PM domain (mask=0x00000004)
  363. [    5.807533] Mali<2>:
  364. [    5.807535] Mali PM domain: Creating Mali PM domain (mask=0x00001000)
  365. [    5.807815] Mali<2>:
  366. [    5.807818] Broadcast: Creating Mali Broadcast unit: Mali_Broadcast
  367. [    5.807834] Mali<2>:
  368. [    5.807837] Mali PP: Creating Mali PP core: Mali_PP0
  369. [    5.807838] Mali<2>:
  370. [    5.807840] Mali PP: Base address of PP core: 0xd00c8000
  371. [    5.808108] Mali<2>:
  372. [    5.808117] Found Mali GPU Mali-450 MP r0p0
  373. [    5.808659] Mali<2>:
  374. [    5.808664] Mali DLBU: Initializing
  375. [    5.808717] Mali<2>:
  376. [    5.808722] Mali L2 cache: Created Mali_L2:   8K, 4-way, 64byte cache line, 128bit external bus
  377. [    5.808727] Mali<2>:
  378. [    5.808730] Mali L2 cache: Created Mali_L2:  64K, 4-way, 64byte cache line, 128bit external bus
  379. [    5.808748] Mali<2>:
  380. [    5.808750] Mali MMU: Creating Mali MMU: Mali_GP_MMU
  381. [    5.808804] Mali<2>:
  382. [    5.808808] mali_mmu_probe_irq_acknowledge: intstat 0x3
  383. [    5.808809] Mali<2>:
  384. [    5.808811] Probe: Page fault detect: PASSED
  385. [    5.808812] Mali<2>:
  386. [    5.808814] Probe: Bus read error detect: PASSED
  387. [    5.808861] Mali<2>:
  388. [    5.808864] Mali GP: Creating Mali GP core: Mali_GP
  389. [    5.808911] Mali<2>:
  390. [    5.808913] Mali MMU: Creating Mali MMU: Mali_PP0_MMU
  391. [    5.808937] Mali<2>:
  392. [    5.808940] mali_mmu_probe_irq_acknowledge: intstat 0x3
  393. [    5.808941] Mali<2>:
  394. [    5.808942] Probe: Page fault detect: PASSED
  395. [    5.808944] Mali<2>:
  396. [    5.808945] Probe: Bus read error detect: PASSED
  397. [    5.808959] Mali<2>:
  398. [    5.808962] Mali PP: Creating Mali PP core: Mali_PP0
  399. [    5.808963] Mali<2>:
  400. [    5.808965] Mali PP: Base address of PP core: 0xd00c8000
  401. [    5.809152] Mali<2>:
  402. [    5.809155] Mali MMU: Creating Mali MMU: Mali_PP1_MMU
  403. [    5.809221] Mali<2>:
  404. [    5.809224] mali_mmu_probe_irq_acknowledge: intstat 0x3
  405. [    5.809225] Mali<2>:
  406. [    5.809226] Probe: Page fault detect: PASSED
  407. [    5.809228] Mali<2>:
  408. [    5.809229] Probe: Bus read error detect: PASSED
  409. [    5.809243] Mali<2>:
  410. [    5.809245] Mali PP: Creating Mali PP core: Mali_PP1
  411. [    5.809246] Mali<2>:
  412. [    5.809249] Mali PP: Base address of PP core: 0xd00ca000
  413. [    5.809439] Mali<2>:
  414. [    5.809442] Mali MMU: Creating Mali MMU: Mali_PP2_MMU
  415. [    5.809517] Mali<2>:
  416. [    5.809520] mali_mmu_probe_irq_acknowledge: intstat 0x3
  417. [    5.809521] Mali<2>:
  418. [    5.809523] Probe: Page fault detect: PASSED
  419. [    5.809524] Mali<2>:
  420. [    5.809525] Probe: Bus read error detect: PASSED
  421. [    5.809544] Mali<2>:
  422. [    5.809547] Mali PP: Creating Mali PP core: Mali_PP2
  423. [    5.809548] Mali<2>:
  424. [    5.809551] Mali PP: Base address of PP core: 0xd00cc000
  425. [    5.809768] Mali<2>:
  426. [    5.809772] Starting new virtual group for MMU PP broadcast core Mali_PP_MMU_Broadcast
  427. [    5.809773] Mali<2>:
  428. [    5.809776] Mali DLBU: Creating Mali dynamic load balancing unit: Mali_DLBU
  429. [    5.809829] Mali<2>:
  430. [    5.809831] Broadcast: Creating Mali Broadcast unit: Mali_Broadcast
  431. [    5.809839] Mali<2>:
  432. [    5.809841] Mali MMU: Creating Mali MMU: Mali_PP_MMU_Broadcast
  433. [    5.809845] Mali<2>:
  434. [    5.809847] Mali PP: Creating Mali PP core: Mali_PP_Broadcast
  435. [    5.809849] Mali<2>:
  436. [    5.809852] Mali PP: Base address of PP core: 0xd00d6000
  437. [    5.810088] Mali<2>:
  438. [    5.810093] 3+0 PP cores initialized
  439. [    5.810153] Mali<2>:
  440. [    5.810158] Mali GPU Timer: 200
  441. [    5.810161] Mali<2>:
  442. [    5.810162] Mali GPU Utilization: No platform utilization handler installed
  443. [    5.810677] Mali<2>:
  444. [    5.810684] mali_probe(): Successfully initialized driver for platform device mali-utgard
  445. [    5.811591] Mali:
  446. [    5.811597] Mali device driver loaded
  447. [    5.837064] Meson GXL Internal PHY 0.e40908ff:08: attached PHY driver [Meson GXL Internal PHY] (mii_bus:phy_addr=0.e40908ff:08, irq=34)
  448. [    5.846131] meson8b-dwmac c9410000.ethernet eth0: No Safety Features support found
  449. [    5.846141] meson8b-dwmac c9410000.ethernet eth0: PTP not supported by HW
  450. [    5.846403] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  451. [    5.862155] usb 1-2: new full-speed USB device number 7 using xhci-hcd
  452. [    5.983063] Console: switching to colour frame buffer device 200x56
  453. [    6.014125] meson-drm d0100000.vpu: fb0:  frame buffer device
  454. [    6.030587] [drm] Initialized meson 1.0.0 20161109 for d0100000.vpu on minor 0
  455. [    6.042182] Registered IR keymap rc-cec
  456. [    6.042321] rc rc2: RC for dw_hdmi as /devices/platform/soc/c883a000.hdmi-tx/rc/rc2
  457. [    6.042448] input: RC for dw_hdmi as /devices/platform/soc/c883a000.hdmi-tx/rc/rc2/input4
  458. [    6.057675] asoc-simple-card sound: i2s-hifi <-> meson-i2s-dai.1.auto mapping ok
  459. [    6.057695] asoc-simple-card sound: ASoC: no DMI vendor name!
  460. [    6.228462] usb 1-1.1: new full-speed USB device number 8 using xhci-hcd
  461. [    7.436027] random: crng init done
  462. [    7.436036] random: 7 urandom warning(s) missed due to ratelimiting
  463. [    9.447065] systemd-journald[1303]: File /var/log/journal/ef39522ea365412c8d1477577fb1328c/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
  464. [    9.828882] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  465. [    9.829086] meson8b-dwmac c9410000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top