Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot SPL 2018.03-rc1-armbian (Apr 26 2018 - 20:35:23 +0200)
- DRAM: 4096 MiB, 3072 MiB usable
- Trying to boot from MMC1
- INFO: PSCI: Powering off cluster 0 core 1
- INFO: PSCI: Disabling power to cluster 0 core 1
- INFO: PSCI: Powering off cluster 0 core 2
- INFO: PSCI: Disabling power to cluster 0 core 2
- INFO: PSCI: Powering off cluster 0 core 3
- INFO: PSCI: Disabling power to cluster 0 core 3
- NOTICE: BL31: v1.4(debug):c591d63
- NOTICE: BL31: Built : 20:35:18, Apr 26 2018
- INFO: ARM GICv2 driver initialized
- INFO: BL31: Platform setup done
- INFO: BL31: Initializing runtime services
- INFO: BL31: cortex_a53: errata workaround for 835769 was applied
- INFO: BL31: cortex_a53: errata workaround for 843419 was applied
- INFO: BL31: cortex_a53: errata workaround for 855873 was applied
- INFO: BL31: Preparing for EL3 exit to normal world
- INFO: Entry point address = 0x4a000000
- INFO: SPSR = 0x3c9
- U-Boot 2018.03-rc1-armbian (Apr 26 2018 - 20:35:23 +0200) Allwinner Technology
- CPU: Allwinner H6 (SUN50I)
- Model: Pine H64
- DRAM: 3 GiB
- MMC: SUNXI SD/MMC: 0, SUNXI SD/MMC: 1
- Loading Environment from FAT... Card did not respond to voltage select!
- mmc_init: -95, time 25
- ** Bad device mmc 1 **
- Failed (-5)
- In: serial@5000000
- Out: serial@5000000
- Err: serial@5000000
- Net: No ethernet found.
- starting USB...
- No controllers found
- Hit any key to stop autoboot: 1 0
- switch to partitions #0, OK
- mmc0 is current device
- Scanning mmc 0:1...
- Found U-Boot script /boot/boot.scr
- 3100 bytes read in 202 ms (14.6 KiB/s)
- ## Executing script at 4fc00000
- U-boot loaded from SD
- Boot script loaded from mmc
- 165 bytes read in 162 ms (1000 Bytes/s)
- 11031 bytes read in 351 ms (30.3 KiB/s)
- ** File not found /boot/dtb/allwinner/overlay/sun50i-h6-fixup.scr **
- 9230674 bytes read in 1217 ms (7.2 MiB/s)
- 15811072 bytes read in 1868 ms (8.1 MiB/s)
- ## Loading init Ramdisk from Legacy Image at 4fe00000 ...
- Image Name: uInitrd
- Image Type: AArch64 Linux RAMDisk Image (gzip compressed)
- Data Size: 9230610 Bytes = 8.8 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Verifying Checksum ... OK
- ## Flattened Device Tree blob at 4fa00000
- Booting using the fdt blob at 0x4fa00000
- Loading Ramdisk to 49732000, end 49fff912 ... OK
- reserving fdt memory region: addr=4fa00000 size=69000
- Loading Device Tree to 00000000496c6000, end 0000000049731fff ... OK
- Starting kernel ...
- Loading, please wait...
- starting version 237
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
- Begin: Running /scripts/local-premount ... Scanning for Btrfs filesystems
- done.
- Begin: Will now check root file system ... fsck from util-linux 2.31.1
- [/sbin/fsck.ext4 (1) -- /dev/mmcblk0p1] fsck.ext4 -a -C0 /dev/mmcblk0p1
- /dev/mmcblk0p1: clean, 33975/1755696 files, 338957/7735992 blocks
- done.
- done.
- Begin: Running /scripts/local-bottom ... done.
- Begin: Running /scripts/init-bottom ... done.
- Welcome to Ubuntu 18.04 LTS!
- [ OK ] Started Dispatch Password Requests to Console Directory Watch.
- [ OK ] Started Forward Password Requests to Wall Directory Watch.
- [ OK ] Started ntp-systemd-netif.path.
- [ OK ] Created slice System Slice.
- [ OK ] Created slice system-serial\x2dgetty.slice.
- [ OK ] Listening on udev Kernel Socket.
- [ OK ] Listening on Journal Audit Socket.
- [ OK ] Listening on Journal Socket (/dev/log).
- [ OK ] Listening on /dev/initctl Compatibility Named Pipe.
- [ OK ] Listening on Journal Socket.
- Mounting POSIX Message Queue File System...
- Mounting Huge Pages File System...
- Mounting Kernel Debug File System...
- [ OK ] Created slice User and Session Slice.
- [ OK ] Reached target Remote File Systems.
- [ OK ] Listening on udev Control Socket.
- Starting udev Coldplug all Devices...
- [ OK ] Reached target Swap.
- Starting Nameserver information manager...
- [ OK ] Listening on Syslog Socket.
- [ OK ] Listening on fsck to fsckd communication Socket.
- Starting Remount Root and Kernel File Systems...
- Starting Set the console keyboard layout...
- Starting Create list of required st…ce nodes for the current kernel...
- Starting Restore / save the current clock...
- Starting Load Kernel Modules...
- [ OK ] Reached target Local Encrypted Volumes.
- [ OK ] Reached target System Time Synchronized.
- [ OK ] Reached target Slices.
- [ OK ] Mounted POSIX Message Queue File System.
- [ OK ] Mounted Huge Pages File System.
- [ OK ] Mounted Kernel Debug File System.
- [ OK ] Started Remount Root and Kernel File Systems.
- [ OK ] Started Create list of required sta…vice nodes for the current kernel.
- [ OK ] Started Load Kernel Modules.
- Starting Apply Kernel Variables...
- Mounting Kernel Configuration File System...
- Starting Create Static Device Nodes in /dev...
- Starting Load/Save Random Seed...
- [ OK ] Started Restore / save the current clock.
- [ OK ] Started udev Coldplug all Devices.
- [ OK ] Started Nameserver information manager.
- [ OK ] Mounted Kernel Configuration File System.
- [ OK ] Started Load/Save Random Seed.
- [ OK ] Reached target Network (Pre).
- [ OK ] Started Apply Kernel Variables.
- [ OK ] Started Set the console keyboard layout.
- [ OK ] Started Create Static Device Nodes in /dev.
- [ OK ] Reached target Local File Systems (Pre).
- Mounting /tmp...
- Starting udev Kernel Device Manager...
- [ OK ] Mounted /tmp.
- [ OK ] Reached target Local File Systems.
- Starting Set console font and keymap...
- Starting Raise network interfaces...
- Starting Armbian enhanced Log2Ram...
- [ OK ] Started Set console font and keymap.
- [ OK ] Started udev Kernel Device Manager.
- [ OK ] Started Armbian enhanced Log2Ram.
- Starting Journal Service...
- [ OK ] Started Raise network interfaces.
- [ OK ] Started Journal Service.
- Starting Flush Journal to Persistent Storage...
- [ OK ] Started Flush Journal to Persistent Storage.
- [ OK ] Found device /dev/ttyS0.
- Starting Create Volatile Files and Directories...
- [ OK ] Started Create Volatile Files and Directories.
- Starting Update UTMP about System Boot/Shutdown...
- Starting Network Name Resolution...
- Starting Network Time Synchronization...
- [ OK ] Started Entropy daemon using the HAVEGE algorithm.
- [ OK ] Started Update UTMP about System Boot/Shutdown.
- [ OK ] Started Network Name Resolution.
- [ OK ] Started Network Time Synchronization.
- [ OK ] Reached target System Initialization.
- [ OK ] Started resolvconf-pull-resolved.path.
- [ OK ] Reached target Paths.
- [ OK ] Started Daily Cleanup of Temporary Directories.
- [ OK ] Started Daily apt download activities.
- [ OK ] Started Daily apt upgrade and clean activities.
- [ OK ] Started Discard unused blocks once a week.
- [ OK ] Listening on D-Bus System Message Bus Socket.
- [ OK ] Reached target Sockets.
- [ OK ] Reached target Basic System.
- Starting System Logging Service...
- Starting Dispatcher daemon for systemd-networkd...
- Starting LSB: Armbian gathering hardware information...
- [ OK ] Started Regular background program processing daemon.
- Starting LSB: Load kernel modules needed to enable cpufreq scaling...
- [ OK ] Started ntp-systemd-netif.service.
- Starting resolvconf-pull-resolved.service...
- Starting Resets System Activity Data Collector...
- [ OK ] Started Set the CPU Frequency Scaling governor.
- [ OK ] Started D-Bus System Message Bus.
- Starting WPA supplicant...
- Starting Network Manager...
- Starting Login Service...
- Starting Initializes zram swaping...
- [ OK ] Started Message of the Day.
- [ OK ] Reached target Timers.
- [ OK ] Reached target Host and Network Name Lookups.
- [ OK ] Started System Logging Service.
- [ OK ] Started resolvconf-pull-resolved.service.
- [ OK ] Started Resets System Activity Data Collector.
- [FAILED] Failed to start Initializes zram swaping.
- See 'systemctl status zram-config.service' for details.
- [ OK ] Started Login Service.
- [ OK ] Started LSB: Load kernel modules needed to enable cpufreq scaling.
- Starting LSB: set CPUFreq kernel parameters...
- [ OK ] Started LSB: set CPUFreq kernel parameters.
- Starting LSB: Set sysfs variables from /etc/sysfs.conf...
- [ OK ] Started LSB: Set sysfs variables from /etc/sysfs.conf.
- [ OK ] Started WPA supplicant.
- [ OK ] Started LSB: Armbian gathering hardware information.
- Starting Hostname Service...
- [ OK ] Started Dispatcher daemon for systemd-networkd.
- [ OK ] Started Hostname Service.
- [ OK ] Started Network Manager.
- [ OK ] Reached target Network.
- [ OK ] Started Unattended Upgrades Shutdown.
- Starting Permit User Sessions...
- Starting OpenBSD Secure Shell server...
- Starting Network Manager Wait Online...
- [ OK ] Started Permit User Sessions.
- Starting Network Manager Script Dispatcher Service...
- Starting Set console scheme...
- [ OK ] Started Set console scheme.
- [ OK ] Created slice system-getty.slice.
- [ OK ] Started Network Manager Script Dispatcher Service.
- [ OK ] Started OpenBSD Secure Shell server.
- Starting Authorization Manager...
- [ OK ] Started Authorization Manager.
- [ OK ] Started Network Manager Wait Online.
- [ OK ] Reached target Network is Online.
- Starting LSB: disk temperature monitoring daemon...
- Starting /etc/rc.local Compatibility...
- [ OK ] Started /etc/rc.local Compatibility.
- [ OK ] Started Getty on tty1.
- [ OK OK ] Reached target Login Prompts.
- [ OK ] Reached target Multi-User System.
- [ OK ] Reached target Graphical Interface.
- Starting Update UTMP about System Runlevel Changes...
- [ OK ] Started Update UTMP about System Runlevel Changes.
- Ubuntu 18.04 LTS pineh64 ttyS0
- pineh64 login: pfeerick
- Password:
- Last login: Sat Apr 28 07:20:26 UTC 2018 on ttyS0
- ____ _ _ _ __ _ _
- | _ \(_)_ __ ___ | | | |/ /_ | || |
- | |_) | | '_ \ / _ \ | |_| | '_ \| || |_
- | __/| | | | | __/ | _ | (_) |__ _|
- |_| |_|_| |_|\___| |_| |_|\___/ |_|
- Welcome to ARMBIAN 5.43.180425 testing Ubuntu 18.04 LTS 4.16.4-sun50iw6
- System load: 1.78 0.48 0.16 Up time: 0 min
- Memory usage: 3 % of 3008MB IP: 192.168.0.129
- Usage of /: 3% of 30G
- pfeerick@pineh64:~$ ip addr
- 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
- link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
- inet 127.0.0.1/8 scope host lo
- valid_lft forever preferred_lft forever
- inet6 ::1/128 scope host
- valid_lft forever preferred_lft forever
- 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
- link/ether fa:f3:06:06:ea:fb brd ff:ff:ff:ff:ff:ff
- inet 192.168.0.129/24 brd 192.168.0.255 scope global dynamic noprefixroute eth0
- valid_lft 86389sec preferred_lft 86389sec
- inet6 fe80::6258:d268:4a9d:25f0/64 scope link noprefixroute
- valid_lft forever preferred_lft forever
- pfeerick@pineh64:~$
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement