API tools faq
paste
david_david

translation fr.po file for Solaar

david_david
Aug 3rd, 2013
226
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 12.72 KB | None | 0 0
raw download clone embed print report
  1. # French translations for solaar package.
  2. # Copyright (C) 2013 THE solaar'S COPYRIGHT HOLDER
  3. # This file is distributed under the same license as the solaar package.
  4. # Automatically generated, 2013.
  5. #
  6. msgid ""
  7. msgstr "Project-Id-Version: solaar 0.9.2\n"
  8. "Report-Msgid-Bugs-To: \n"
  9. "POT-Creation-Date: 2013-08-03 12:58+0200\n"
  10. "PO-Revision-Date: 2013-08-03 12:58+0200\n"
  11. "Last-Translator: Papoteur & Geiger David <[email protected]>\n"
  12. "Language-Team: French <[email protected]>\n"
  13. "Language: fr\n"
  14. "MIME-Version: 1.0\n"
  15. "Content-Type: text/plain; charset=UTF-8\n"
  16. "Content-Transfer-Encoding: 8bit\n"
  17. "Plural-Forms: nplurals=2; plural=(n > 1);\n"
  18.  
  19. #: lib/logitech_receiver/i18n.py:38
  20. msgid "critical"
  21. msgstr "critique"
  22.  
  23. #: lib/logitech_receiver/i18n.py:38
  24. msgid "empty"
  25. msgstr "vide"
  26.  
  27. #: lib/logitech_receiver/i18n.py:38 lib/logitech_receiver/i18n.py:41
  28. msgid "full"
  29. msgstr "pleine"
  30.  
  31. #: lib/logitech_receiver/i18n.py:38
  32. msgid "good"
  33. msgstr "bonne"
  34.  
  35. #: lib/logitech_receiver/i18n.py:38
  36. msgid "low"
  37. msgstr "faible"
  38.  
  39. #: lib/logitech_receiver/i18n.py:41
  40. msgid "almost full"
  41. msgstr "presque pleine"
  42.  
  43. #: lib/logitech_receiver/i18n.py:41
  44. msgid "discharging"
  45. msgstr "En décharge"
  46.  
  47. #: lib/logitech_receiver/i18n.py:41
  48. msgid "recharging"
  49. msgstr "En charge"
  50.  
  51. #: lib/logitech_receiver/i18n.py:42
  52. msgid "invalid battery"
  53. msgstr "batterie invalide"
  54.  
  55. #: lib/logitech_receiver/i18n.py:42
  56. msgid "slow recharge"
  57. msgstr "recharge lente"
  58.  
  59. #: lib/logitech_receiver/i18n.py:42
  60. msgid "thermal error"
  61. msgstr "erreur thermique"
  62.  
  63. #: lib/logitech_receiver/i18n.py:45
  64. msgid "device not supported"
  65. msgstr "périphérique non pris en charge"
  66.  
  67. #: lib/logitech_receiver/i18n.py:45
  68. msgid "device timeout"
  69. msgstr "le périphérique ne répond pas"
  70.  
  71. #: lib/logitech_receiver/i18n.py:45
  72. msgid "sequence timeout"
  73. msgstr "dépassement de délai"
  74.  
  75. #: lib/logitech_receiver/i18n.py:45
  76. msgid "too many devices"
  77. msgstr "trop de périphériques"
  78.  
  79. #: lib/logitech_receiver/i18n.py:48
  80. msgid "Bootloader"
  81. msgstr "Bootloader"
  82.  
  83. #: lib/logitech_receiver/i18n.py:48 lib/solaar/ui/window.py:538
  84. msgid "Firmware"
  85. msgstr "Firmware"
  86.  
  87. #: lib/logitech_receiver/i18n.py:48
  88. msgid "Hardware"
  89. msgstr "Matériel"
  90.  
  91. #: lib/logitech_receiver/i18n.py:48
  92. msgid "Other"
  93. msgstr "Autre"
  94.  
  95. #: lib/logitech_receiver/notifications.py:67
  96. msgid "closed"
  97. msgstr "fermé"
  98.  
  99. #: lib/logitech_receiver/notifications.py:67
  100. msgid "open"
  101. msgstr "ouvert"
  102.  
  103. #: lib/logitech_receiver/notifications.py:67
  104. msgid "pairing lock is "
  105. msgstr "le verrou d'appairage est "
  106.  
  107. #: lib/logitech_receiver/notifications.py:192
  108. msgid "powered on"
  109. msgstr "sous tension"
  110.  
  111. #: lib/logitech_receiver/receiver.py:107 lib/solaar/ui/window.py:625
  112. msgid "unknown"
  113. msgstr "inconnu"
  114.  
  115. #: lib/logitech_receiver/settings_templates.py:77
  116. msgid "Smooth Scrolling"
  117. msgstr "Défilement fluide"
  118.  
  119. #: lib/logitech_receiver/settings_templates.py:78
  120. msgid "High-sensitivity mode for vertical scroll with the wheel."
  121. msgstr "Mode haute sensibilité pour défilement vertical avec la molette."
  122.  
  123. #: lib/logitech_receiver/settings_templates.py:79
  124. msgid "Side Scrolling"
  125. msgstr "Défilement latéral"
  126.  
  127. #: lib/logitech_receiver/settings_templates.py:80
  128. msgid ""
  129. "When disabled, pushing the wheel sideways sends custom button "
  130. "events\n"
  131. "instead of the standard side-scrolling events."
  132. msgstr ""
  133. "Lorsque désactivé, l'appui sur les côtés de la molette envoie des évènements\n "
  134. "de bouton personnalisés à la place des évènements standards de défilement "
  135. "latéral."
  136.  
  137. #: lib/logitech_receiver/settings_templates.py:82
  138. msgid "Sensitivity (DPI)"
  139. msgstr "Sensibilité (DPI)"
  140.  
  141. #: lib/logitech_receiver/settings_templates.py:83
  142. msgid "Swap Fx function"
  143. msgstr "Fonction Swap Fx"
  144.  
  145. #: lib/logitech_receiver/settings_templates.py:84
  146. msgid ""
  147. "When set, the F1..F12 keys will activate their special function,\n"
  148. "and you must hold the FN key to activate their standard function."
  149. msgstr ""
  150. "Lorsque défini, les touches F1..F12 activeront leurs fonctions spéciale,\n"
  151. "et vous devez maintenir la touche FN pour activer leurs fonctions standard."
  152.  
  153. #: lib/logitech_receiver/settings_templates.py:87
  154. msgid ""
  155. "When unset, the F1..F12 keys will activate their standard function,\n"
  156. "and you must hold the FN key to activate their special function."
  157. msgstr ""
  158. "Lorsque non défini, les touches F1..F12 activeront leurs fonctions standard,\n"
  159. "et vous devez maintenir la touche FN pour activer leurs fonctions spéciale."
  160.  
  161. #: lib/logitech_receiver/settings_templates.py:89
  162. msgid "Hand Detection"
  163. msgstr "Détection manuelle"
  164.  
  165. #: lib/logitech_receiver/settings_templates.py:90
  166. msgid "Turn on illumination when the hands hover over the keyboard."
  167. msgstr "Allume l'éclairage lorsque les mains passent au-dessus du clavier."
  168.  
  169. #: lib/logitech_receiver/status.py:98
  170. msgid "No paired devices."
  171. msgstr "Aucun périphériques connectés"
  172.  
  173. #: lib/logitech_receiver/status.py:99
  174. msgid "1 paired device."
  175. msgstr "1 périphérique connecté."
  176.  
  177. #: lib/logitech_receiver/status.py:100
  178. msgid " paired devices."
  179. msgstr " périphériques connectés."
  180.  
  181. #: lib/logitech_receiver/status.py:153 lib/logitech_receiver/status.py:155
  182. #: lib/solaar/ui/window.py:146
  183. msgid "Battery"
  184. msgstr "Batterie"
  185.  
  186. #: lib/logitech_receiver/status.py:161 lib/solaar/ui/window.py:153
  187. msgid "Lighting"
  188. msgstr "Eclairage"
  189.  
  190. #: lib/logitech_receiver/status.py:161 lib/solaar/ui/window.py:666
  191. msgid "lux"
  192. msgstr "lux"
  193.  
  194. #: lib/solaar/listener.py:95
  195. msgid "The receiver was unplugged."
  196. msgstr "Le récepteur a été débranché."
  197.  
  198. #: lib/solaar/ui/__init__.py:69
  199. msgid "Permissions error"
  200. msgstr "Erreur de permissions"
  201.  
  202. #: lib/solaar/ui/__init__.py:70
  203. #, python-format
  204. msgid ""
  205. "Found a Logitech Receiver (%s), but did not have permission to open "
  206. "it."
  207. msgstr ""
  208. "Trouvé un récepteur Logitech (%s), mais n'a pas eu l'autorisation de "
  209. "l'ouvrir."
  210.  
  211. #: lib/solaar/ui/__init__.py:72
  212. msgid ""
  213. "If you've just installed Solaar, try removing the receiver and "
  214. "plugging it back in."
  215. msgstr ""
  216. "Si vous venez juste d'installer Solaar, essayez de retirer le "
  217. "récepteur et de le rebrancher."
  218.  
  219. #: lib/solaar/ui/__init__.py:74
  220. msgid "Unpairing failed"
  221. msgstr "La deconnection a échouée"
  222.  
  223. #: lib/solaar/ui/__init__.py:75
  224. #, python-format
  225. msgid "Failed to unpair %s from %s."
  226. msgstr "Impossible de dissocier %s de %s."
  227.  
  228. #: lib/solaar/ui/__init__.py:77
  229. msgid "The receiver returned an error, with no further details."
  230. msgstr "Le récepteur a retourné une erreur, sans plus de détails."
  231.  
  232. #: lib/solaar/ui/about.py:39
  233. msgid ""
  234. "Shows status of devices connected\n"
  235. "through wireless Logitech receivers."
  236. msgstr ""
  237. "Affiche l'état des périphériques connectés\n"
  238. "à travers les récepteurs sans fil Logitech."
  239.  
  240. #: lib/solaar/ui/about.py:48
  241. msgid "GUI design"
  242. msgstr "Interface graphique"
  243.  
  244. #: lib/solaar/ui/about.py:49
  245. msgid "Testing"
  246. msgstr "Testeur"
  247.  
  248. #: lib/solaar/ui/about.py:54
  249. msgid "Logitech documentation"
  250. msgstr "Documentațion Logitech"
  251.  
  252. #: lib/solaar/ui/action.py:68 lib/solaar/ui/window.py:319
  253. msgid "About"
  254. msgstr "A propos de"
  255.  
  256. #: lib/solaar/ui/action.py:95 lib/solaar/ui/action.py:98
  257. #: lib/solaar/ui/window.py:206
  258. msgid "Unpair"
  259. msgstr "Déconnecter"
  260.  
  261. #: lib/solaar/ui/config_panel.py:97
  262. msgid "Working"
  263. msgstr "En fonctionnement"
  264.  
  265. #: lib/solaar/ui/config_panel.py:100
  266. msgid "Read/write operation failed."
  267. msgstr "Les opérations de lecture/écriture ont échouées."
  268.  
  269. #: lib/solaar/ui/notify.py:115
  270. msgid "unpaired"
  271. msgstr "déconnecté"
  272.  
  273. #: lib/solaar/ui/notify.py:116
  274. msgid "connected"
  275. msgstr "connecté"
  276.  
  277. #: lib/solaar/ui/notify.py:116 lib/solaar/ui/tray.py:285
  278. #: lib/solaar/ui/tray.py:290 lib/solaar/ui/window.py:656
  279. msgid "offline"
  280. msgstr "inactif"
  281.  
  282. #: lib/solaar/ui/pair_window.py:133
  283. msgid "Pairing failed"
  284. msgstr "La connection a échouée"
  285.  
  286. #: lib/solaar/ui/pair_window.py:135
  287. msgid ""
  288. "Make sure your device is within range, and has a decent battery "
  289. "charge."
  290. msgstr ""
  291. "Assurez-vous que votre périphérique soit à portée, et que sa "
  292. "batterie soit suffisamment chargée."
  293.  
  294. #: lib/solaar/ui/pair_window.py:137
  295. msgid ""
  296. "A new device was detected, but it is not compatible with this "
  297. "receiver."
  298. msgstr ""
  299. "Un nouveau périphérique a été détecté, mais il n'est pas compatible "
  300. "avec ce récepteur."
  301.  
  302. #: lib/solaar/ui/pair_window.py:139
  303. #, python-format
  304. msgid "The receiver only supports %d paired device(s)."
  305. msgstr "Le récepteur supporte seulement %d périphérique(s). "
  306.  
  307. #: lib/solaar/ui/pair_window.py:141
  308. msgid "No further details are available about the error."
  309. msgstr "Aucun autre détail n'est disponible à propos de l'erreur."
  310.  
  311. #: lib/solaar/ui/pair_window.py:155
  312. msgid "Found a new device"
  313. msgstr "Nouveau périphérique disponible"
  314.  
  315. #: lib/solaar/ui/pair_window.py:180
  316. msgid "The wireless link is not encrypted"
  317. msgstr "La connection sans fil n'est pas cryptée"
  318.  
  319. #: lib/solaar/ui/pair_window.py:197
  320. msgid "pair new device"
  321. msgstr "connecte un nouveau périphérique"
  322.  
  323. #: lib/solaar/ui/pair_window.py:205
  324. msgid "Turn on the device you want to pair."
  325. msgstr "Allumez le périphérique que vous souhaitez connecter."
  326.  
  327. #: lib/solaar/ui/pair_window.py:206
  328. msgid ""
  329. "If the device is already turned on,\n"
  330. "turn if off and on again."
  331. msgstr ""
  332. "Si le périphérique est déjà allumé,\n"
  333. "éteignez le et rallumez-le à nouveau."
  334.  
  335. #: lib/solaar/ui/tray.py:55
  336. msgid "No Logitech receiver found"
  337. msgstr "Aucun récepteur Logitech trouvé"
  338.  
  339. #: lib/solaar/ui/tray.py:62
  340. msgid "Quit"
  341. msgstr "Quitter"
  342.  
  343. #: lib/solaar/ui/tray.py:269
  344. msgid "no receiver"
  345. msgstr "aucun récepteur"
  346.  
  347. #: lib/solaar/ui/tray.py:288
  348. msgid "no status"
  349. msgstr "aucun statut"
  350.  
  351. #: lib/solaar/ui/window.py:58
  352. msgid "The wireless link between this device and its receiver is encrypted."
  353. msgstr "La connection sans fil entre cet appareil et son récepteur est cryptée."
  354.  
  355. #: lib/solaar/ui/window.py:59
  356. msgid ""
  357. "The wireless link between this device and its receiver is not "
  358. "encrypted.\n"
  359. "\n"
  360. "For pointing devices (mice, trackballs, trackpads), this is a minor "
  361. "security issue.\n"
  362. "\n"
  363. "It is, however, a major security issue for text-input devices "
  364. "(keyboards, numpads),\n"
  365. "because typed text can be sniffed inconspicuously by 3rd parties "
  366. "within range."
  367. msgstr ""
  368. "La connection sans fil entre cet appareil et son récepteur n'est pas cryptée.\n"
  369. "\n"
  370. "Pour des dispositifs de pointage (souris, trackball, trackpad), c'est une "
  371. "faille mineure de sécurité\n"
  372. "\n"
  373. "Par contre, c'est une faille majeure pour les dispositifs d'entrée de texte "
  374. "(clavier, pavé numérique)\n"
  375. "car les données saisies peuvent être volées à votre insu par des tiers à "
  376. "proximité."
  377.  
  378. #: lib/solaar/ui/window.py:67 lib/solaar/ui/window.py:71
  379. msgid "No device paired"
  380. msgstr "Aucun périphérique connecté"
  381.  
  382. #: lib/solaar/ui/window.py:67 lib/solaar/ui/window.py:68
  383. #, python-format
  384. msgid "Up to %d devices can be paired to this receiver"
  385. msgstr "Jusqu'à %d périphériques peuvent être couplés à ce récepteur"
  386.  
  387. #: lib/solaar/ui/window.py:68
  388. msgid "paired devices"
  389. msgstr "périphérique(s) connecté(s)"
  390.  
  391. #: lib/solaar/ui/window.py:72
  392. msgid "Only one device can be paired to this receiver"
  393. msgstr "Un seul périphérique peut être couplé à ce récepteur"
  394.  
  395. #: lib/solaar/ui/window.py:113
  396. msgid "Scanning"
  397. msgstr "Balayage"
  398.  
  399. #: lib/solaar/ui/window.py:149
  400. msgid "Wireless Link"
  401. msgstr "Connection sans fil"
  402.  
  403. #: lib/solaar/ui/window.py:182
  404. msgid "Show Technical Details"
  405. msgstr "Voir les détails techniques"
  406.  
  407. #: lib/solaar/ui/window.py:195
  408. msgid "Pair new device"
  409. msgstr "Connecter un nouveau périphérique"
  410.  
  411. #: lib/solaar/ui/window.py:214
  412. msgid "Select a device"
  413. msgstr "Sélectionnez un périphérique"
  414.  
  415. #: lib/solaar/ui/window.py:511
  416. msgid "Path"
  417. msgstr "Chemin"
  418.  
  419. #: lib/solaar/ui/window.py:513
  420. msgid "USB id"
  421. msgstr "Id USB"
  422.  
  423. #: lib/solaar/ui/window.py:516 lib/solaar/ui/window.py:518
  424. #: lib/solaar/ui/window.py:530 lib/solaar/ui/window.py:532
  425. msgid "Serial"
  426. msgstr "N°Série"
  427.  
  428. #: lib/solaar/ui/window.py:522
  429. msgid "Index"
  430. msgstr "Index"
  431.  
  432. #: lib/solaar/ui/window.py:523
  433. msgid "Wireless PID"
  434. msgstr "Wireless PID"
  435.  
  436. #: lib/solaar/ui/window.py:525
  437. msgid "Protocol"
  438. msgstr "Protocole"
  439.  
  440. #: lib/solaar/ui/window.py:527
  441. msgid "Polling rate"
  442. msgstr "Taux de scrutation"
  443.  
  444. #: lib/solaar/ui/window.py:542
  445. msgid "none"
  446. msgstr "aucun"
  447.  
  448. #: lib/solaar/ui/window.py:543
  449. msgid "Notifications"
  450. msgstr "Notifications"
  451.  
  452. #: lib/solaar/ui/window.py:638
  453. msgid "charging"
  454. msgstr "chargement"
  455.  
  456. #: lib/solaar/ui/window.py:640
  457. msgid "last known"
  458. msgstr "dernière valeur connue"
  459.  
  460. #: lib/solaar/ui/window.py:647
  461. msgid "not encrypted"
  462. msgstr "non cryptée"
  463.  
  464. #: lib/solaar/ui/window.py:651
  465. msgid "encrypted"
  466. msgstr "cryptée"
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!