SHARE
TWEET

Untitled

a guest Oct 23rd, 2017 74 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. #
  2. # This is the main Apache HTTP server configuration file.  It contains the
  3. # configuration directives that give the server its instructions.
  4. # See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
  5. # In particular, see
  6. # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
  7. # for a discussion of each configuration directive.
  8. #
  9. # Do NOT simply read the instructions in here without understanding
  10. # what they do.  They're here only as hints or reminders.  If you are unsure
  11. # consult the online docs. You have been warned.  
  12. #
  13. # Configuration and logfile names: If the filenames you specify for many
  14. # of the server's control files begin with "/" (or "drive:/" for Win32), the
  15. # server will use that explicit path.  If the filenames do *not* begin
  16. # with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
  17. # with ServerRoot set to "C:/oprogramowanie/apache 2" will be interpreted by the
  18. # server as "C:/oprogramowanie/apache 2/logs/foo.log".
  19. #
  20. # NOTE: Where filenames are specified, you must use forward slashes
  21. # instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
  22. # If a drive letter is omitted, the drive on which Apache.exe is located
  23. # will be used by default.  It is recommended that you always supply
  24. # an explicit drive letter in absolute paths to avoid confusion.
  25.  
  26. #
  27. # ServerRoot: The top of the directory tree under which the server's
  28. # configuration, error, and log files are kept.
  29. #
  30. # Do not add a slash at the end of the directory path.  If you point
  31. # ServerRoot at a non-local disk, be sure to point the LockFile directive
  32. # at a local disk.  If you wish to share the same ServerRoot for multiple
  33. # httpd daemons, you will need to change at least LockFile and PidFile.
  34. #
  35. ServerRoot "C:/oprogramowanie/apache 2"
  36.  
  37. #
  38. # Listen: Allows you to bind Apache to specific IP addresses and/or
  39. # ports, instead of the default. See also the <VirtualHost>
  40. # directive.
  41. #
  42. # Change this to Listen on specific IP addresses as shown below to
  43. # prevent Apache from glomming onto all bound IP addresses.
  44. #
  45. #Listen 12.34.56.78:80
  46. #Listen 12.34.56.78:8080
  47. Listen 80
  48. Listen 8080
  49.  
  50. #
  51. # Dynamic Shared Object (DSO) Support
  52. #
  53. # To be able to use the functionality of a module which was built as a DSO you
  54. # have to place corresponding `LoadModule' lines at this location so the
  55. # directives contained in it are actually available _before_ they are used.
  56. # Statically compiled modules (those listed by `httpd -l') do not need
  57. # to be loaded here.
  58. #
  59. # Example:
  60. # LoadModule foo_module modules/mod_foo.so
  61. #
  62. LoadModule actions_module modules/mod_actions.so
  63. LoadModule alias_module modules/mod_alias.so
  64. LoadModule asis_module modules/mod_asis.so
  65. LoadModule auth_basic_module modules/mod_auth_basic.so
  66. #LoadModule auth_digest_module modules/mod_auth_digest.so
  67. #LoadModule authn_alias_module modules/mod_authn_alias.so
  68. #LoadModule authn_anon_module modules/mod_authn_anon.so
  69. #LoadModule authn_dbd_module modules/mod_authn_dbd.so
  70. #LoadModule authn_dbm_module modules/mod_authn_dbm.so
  71. LoadModule authn_default_module modules/mod_authn_default.so
  72. LoadModule authn_file_module modules/mod_authn_file.so
  73. #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
  74. #LoadModule authz_dbm_module modules/mod_authz_dbm.so
  75. LoadModule authz_default_module modules/mod_authz_default.so
  76. LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
  77. LoadModule authz_host_module modules/mod_authz_host.so
  78. #LoadModule authz_owner_module modules/mod_authz_owner.so
  79. LoadModule authz_user_module modules/mod_authz_user.so
  80. LoadModule autoindex_module modules/mod_autoindex.so
  81. #LoadModule cache_module modules/mod_cache.so
  82. #LoadModule cern_meta_module modules/mod_cern_meta.so
  83. LoadModule cgi_module modules/mod_cgi.so
  84. #LoadModule charset_lite_module modules/mod_charset_lite.so
  85. #LoadModule dav_module modules/mod_dav.so
  86. #LoadModule dav_fs_module modules/mod_dav_fs.so
  87. #LoadModule dav_lock_module modules/mod_dav_lock.so
  88. #LoadModule dbd_module modules/mod_dbd.so
  89. #LoadModule deflate_module modules/mod_deflate.so
  90. LoadModule dir_module modules/mod_dir.so
  91. #LoadModule disk_cache_module modules/mod_disk_cache.so
  92. #LoadModule dumpio_module modules/mod_dumpio.so
  93. LoadModule env_module modules/mod_env.so
  94. #LoadModule expires_module modules/mod_expires.so
  95. #LoadModule ext_filter_module modules/mod_ext_filter.so
  96. #LoadModule file_cache_module modules/mod_file_cache.so
  97. #LoadModule filter_module modules/mod_filter.so
  98. #LoadModule headers_module modules/mod_headers.so
  99. #LoadModule ident_module modules/mod_ident.so
  100. #LoadModule imagemap_module modules/mod_imagemap.so
  101. LoadModule include_module modules/mod_include.so
  102. #LoadModule info_module modules/mod_info.so
  103. LoadModule isapi_module modules/mod_isapi.so
  104. #LoadModule ldap_module modules/mod_ldap.so
  105. #LoadModule logio_module modules/mod_logio.so
  106. LoadModule log_config_module modules/mod_log_config.so
  107. #LoadModule log_forensic_module modules/mod_log_forensic.so
  108. #LoadModule mem_cache_module modules/mod_mem_cache.so
  109. LoadModule mime_module modules/mod_mime.so
  110. #LoadModule mime_magic_module modules/mod_mime_magic.so
  111. LoadModule negotiation_module modules/mod_negotiation.so
  112. #LoadModule proxy_module modules/mod_proxy.so
  113. #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
  114. #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
  115. #LoadModule proxy_connect_module modules/mod_proxy_connect.so
  116. #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
  117. #LoadModule proxy_http_module modules/mod_proxy_http.so
  118. #LoadModule rewrite_module modules/mod_rewrite.so
  119. LoadModule setenvif_module modules/mod_setenvif.so
  120. #LoadModule speling_module modules/mod_speling.so
  121. #LoadModule ssl_module modules/mod_ssl.so
  122. #LoadModule status_module modules/mod_status.so
  123. #LoadModule substitute_module modules/mod_substitute.so
  124. #LoadModule unique_id_module modules/mod_unique_id.so
  125. #LoadModule userdir_module modules/mod_userdir.so
  126. #LoadModule usertrack_module modules/mod_usertrack.so
  127. #LoadModule version_module modules/mod_version.so
  128. #LoadModule vhost_alias_module modules/mod_vhost_alias.so
  129.  
  130. <IfModule !mpm_netware_module>
  131. <IfModule !mpm_winnt_module>
  132. #
  133. # If you wish httpd to run as a different user or group, you must run
  134. # httpd as root initially and it will switch.  
  135. #
  136. # User/Group: The name (or #number) of the user/group to run httpd as.
  137. # It is usually good practice to create a dedicated user and group for
  138. # running httpd, as with most system services.
  139. #
  140. User daemon
  141. Group daemon
  142.  
  143. </IfModule>
  144. </IfModule>
  145.  
  146. # 'Main' server configuration
  147. #
  148. # The directives in this section set up the values used by the 'main'
  149. # server, which responds to any requests that aren't handled by a
  150. # <VirtualHost> definition.  These values also provide defaults for
  151. # any <VirtualHost> containers you may define later in the file.
  152. #
  153. # All of these directives may appear inside <VirtualHost> containers,
  154. # in which case these default settings will be overridden for the
  155. # virtual host being defined.
  156. #
  157.  
  158. #
  159. # ServerAdmin: Your address, where problems with the server should be
  160. # e-mailed.  This address appears on some server-generated pages, such
  161. # as error documents.  e.g. admin@your-domain.com
  162. #
  163. ServerAdmin admin@szssiz.tu.kielce.pl
  164.  
  165. #
  166. # ServerName gives the name and port that the server uses to identify itself.
  167. # This can often be determined automatically, but we recommend you specify
  168. # it explicitly to prevent problems during startup.
  169. #
  170. # If your host doesn't have a registered DNS name, enter its IP address here.
  171. #
  172. #ServerName localhost:80
  173. #ServerName localhost:8080
  174.  
  175. #
  176. # DocumentRoot: The directory out of which you will serve your
  177. # documents. By default, all requests are taken from this directory, but
  178. # symbolic links and aliases may be used to point to other locations.
  179. #
  180. DocumentRoot "D:\Gru_3ID13A\Strona_www"
  181.  
  182. #
  183. # Each directory to which Apache has access can be configured with respect
  184. # to which services and features are allowed and/or disabled in that
  185. # directory (and its subdirectories).
  186. #
  187. # First, we configure the "default" to be a very restrictive set of
  188. # features.  
  189. #
  190. <Directory />
  191.     Options FollowSymLinks
  192.     AllowOverride None
  193.     Order deny,allow
  194.     Deny from all
  195. </Directory>
  196.  
  197. #
  198. # Note that from this point forward you must specifically allow
  199. # particular features to be enabled - so if something's not working as
  200. # you might expect, make sure that you have specifically enabled it
  201. # below.
  202. #
  203.  
  204. #
  205. # This should be changed to whatever you set DocumentRoot to.
  206. #
  207. <Directory "D:\Gru_3ID13A\Strona_www">
  208.     # Possible values for the Options directive are "None", "All",
  209.     # or any combination of:
  210.     #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
  211.     #
  212.     # Note that "MultiViews" must be named *explicitly* --- "Options All"
  213.     # doesn't give it to you.
  214.     #
  215.     # The Options directive is both complicated and important.  Please see
  216.     # http://httpd.apache.org/docs/2.2/mod/core.html#options
  217.     # for more information.
  218.     #
  219.     Options Indexes FollowSymLinks
  220.  
  221.     #
  222.     # AllowOverride controls what directives may be placed in .htaccess files.
  223.     # It can be "All", "None", or any combination of the keywords:
  224.     #   Options FileInfo AuthConfig Limit
  225.     #
  226.     AllowOverride None
  227.  
  228.     #
  229.     # Controls who can get stuff from this server.
  230.     #
  231.     Order allow,deny
  232.     Allow from all
  233.  
  234. </Directory>
  235.  
  236. #
  237. # DirectoryIndex: sets the file that Apache will serve if a directory
  238. # is requested.
  239. #
  240. <IfModule dir_module>
  241.     DirectoryIndex index.html
  242. </IfModule>
  243.  
  244. #
  245. # The following lines prevent .htaccess and .htpasswd files from being
  246. # viewed by Web clients.
  247. #
  248. <FilesMatch "^\.ht">
  249.     Order allow,deny
  250.     Deny from all
  251.     Satisfy All
  252. </FilesMatch>
  253.  
  254. #
  255. # ErrorLog: The location of the error log file.
  256. # If you do not specify an ErrorLog directive within a <VirtualHost>
  257. # container, error messages relating to that virtual host will be
  258. # logged here.  If you *do* define an error logfile for a <VirtualHost>
  259. # container, that host's errors will be logged there and not here.
  260. #
  261. ErrorLog "logs/error.log"
  262.  
  263. #
  264. # LogLevel: Control the number of messages logged to the error_log.
  265. # Possible values include: debug, info, notice, warn, error, crit,
  266. # alert, emerg.
  267. #
  268. LogLevel warn
  269.  
  270. <IfModule log_config_module>
  271.     #
  272.     # The following directives define some format nicknames for use with
  273.     # a CustomLog directive (see below).
  274.     #
  275.     LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
  276.     LogFormat "%h %l %u %t \"%r\" %>s %b" common
  277.  
  278.     <IfModule logio_module>
  279.       # You need to enable mod_logio.c to use %I and %O
  280.       LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
  281.     </IfModule>
  282.  
  283.     #
  284.     # The location and format of the access logfile (Common Logfile Format).
  285.     # If you do not define any access logfiles within a <VirtualHost>
  286.     # container, they will be logged here.  Contrariwise, if you *do*
  287.     # define per-<VirtualHost> access logfiles, transactions will be
  288.     # logged therein and *not* in this file.
  289.     #
  290.     CustomLog "logs/access.log" common
  291.  
  292.     #
  293.     # If you prefer a logfile with access, agent, and referer information
  294.     # (Combined Logfile Format) you can use the following directive.
  295.     #
  296.     #CustomLog "logs/access.log" combined
  297. </IfModule>
  298.  
  299. <IfModule alias_module>
  300.     #
  301.     # Redirect: Allows you to tell clients about documents that used to
  302.     # exist in your server's namespace, but do not anymore. The client
  303.     # will make a new request for the document at its new location.
  304.     # Example:
  305.     # Redirect permanent /foo http://localhost/bar
  306.  
  307.     #
  308.     # Alias: Maps web paths into filesystem paths and is used to
  309.     # access content that does not live under the DocumentRoot.
  310.     # Example:
  311.     # Alias /webpath /full/filesystem/path
  312.     #
  313.     # If you include a trailing / on /webpath then the server will
  314.     # require it to be present in the URL.  You will also likely
  315.     # need to provide a <Directory> section to allow access to
  316.     # the filesystem path.
  317.  
  318.     #
  319.     # ScriptAlias: This controls which directories contain server scripts.
  320.     # ScriptAliases are essentially the same as Aliases, except that
  321.     # documents in the target directory are treated as applications and
  322.     # run by the server when requested rather than as documents sent to the
  323.     # client.  The same rules about trailing "/" apply to ScriptAlias
  324.     # directives as to Alias.
  325.     #
  326.     ScriptAlias /cgi-bin/ "C:/oprogramowanie/apache 2/cgi-bin/"
  327.  
  328. </IfModule>
  329.  
  330. <IfModule cgid_module>
  331.     #
  332.     # ScriptSock: On threaded servers, designate the path to the UNIX
  333.     # socket used to communicate with the CGI daemon of mod_cgid.
  334.     #
  335.     #Scriptsock logs/cgisock
  336. </IfModule>
  337.  
  338. #
  339. # "C:/oprogramowanie/apache 2/cgi-bin" should be changed to whatever your ScriptAliased
  340. # CGI directory exists, if you have that configured.
  341. #
  342. <Directory "C:/oprogramowanie/apache 2/cgi-bin">
  343.     AllowOverride None
  344.     Options None
  345.     Order allow,deny
  346.     Allow from all
  347. </Directory>
  348.  
  349. #
  350. # DefaultType: the default MIME type the server will use for a document
  351. # if it cannot otherwise determine one, such as from filename extensions.
  352. # If your server contains mostly text or HTML documents, "text/plain" is
  353. # a good value.  If most of your content is binary, such as applications
  354. # or images, you may want to use "application/octet-stream" instead to
  355. # keep browsers from trying to display binary files as though they are
  356. # text.
  357. #
  358. DefaultType text/plain
  359.  
  360. <IfModule mime_module>
  361.     #
  362.     # TypesConfig points to the file containing the list of mappings from
  363.     # filename extension to MIME-type.
  364.     #
  365.     TypesConfig conf/mime.types
  366.  
  367.     #
  368.     # AddType allows you to add to or override the MIME configuration
  369.     # file specified in TypesConfig for specific file types.
  370.     #
  371.     #AddType application/x-gzip .tgz
  372.     #
  373.     # AddEncoding allows you to have certain browsers uncompress
  374.     # information on the fly. Note: Not all browsers support this.
  375.     #
  376.     #AddEncoding x-compress .Z
  377.     #AddEncoding x-gzip .gz .tgz
  378.     #
  379.     # If the AddEncoding directives above are commented-out, then you
  380.     # probably should define those extensions to indicate media types:
  381.     #
  382.     AddType application/x-compress .Z
  383.     AddType application/x-gzip .gz .tgz
  384.  
  385.     #
  386.     # AddHandler allows you to map certain file extensions to "handlers":
  387.     # actions unrelated to filetype. These can be either built into the server
  388.     # or added with the Action directive (see below)
  389.     #
  390.     # To use CGI scripts outside of ScriptAliased directories:
  391.     # (You will also need to add "ExecCGI" to the "Options" directive.)
  392.     #
  393.     #AddHandler cgi-script .cgi
  394.  
  395.     # For type maps (negotiated resources):
  396.     #AddHandler type-map var
  397.  
  398.     #
  399.     # Filters allow you to process content before it is sent to the client.
  400.     #
  401.     # To parse .shtml files for server-side includes (SSI):
  402.     # (You will also need to add "Includes" to the "Options" directive.)
  403.     #
  404.     #AddType text/html .shtml
  405.     #AddOutputFilter INCLUDES .shtml
  406. </IfModule>
  407.  
  408. #
  409. # The mod_mime_magic module allows the server to use various hints from the
  410. # contents of the file itself to determine its type.  The MIMEMagicFile
  411. # directive tells the module where the hint definitions are located.
  412. #
  413. #MIMEMagicFile conf/magic
  414.  
  415. #
  416. # Customizable error responses come in three flavors:
  417. # 1) plain text 2) local redirects 3) external redirects
  418. #
  419. # Some examples:
  420. #ErrorDocument 500 "The server made a boo boo."
  421. #ErrorDocument 404 /missing.html
  422. #ErrorDocument 404 "/cgi-bin/missing_handler.pl"
  423. #ErrorDocument 402 http://localhost/subscription_info.html
  424. #
  425.  
  426. #
  427. # EnableMMAP and EnableSendfile: On systems that support it,
  428. # memory-mapping or the sendfile syscall is used to deliver
  429. # files.  This usually improves server performance, but must
  430. # be turned off when serving from networked-mounted
  431. # filesystems or if support for these functions is otherwise
  432. # broken on your system.
  433. #
  434. #EnableMMAP off
  435. #EnableSendfile off
  436.  
  437. # Supplemental configuration
  438. #
  439. # The configuration files in the conf/extra/ directory can be
  440. # included to add extra features or to modify the default configuration of
  441. # the server, or you may simply copy their contents here and change as
  442. # necessary.
  443.  
  444. # Server-pool management (MPM specific)
  445. #Include conf/extra/httpd-mpm.conf
  446.  
  447. # Multi-language error messages
  448. #Include conf/extra/httpd-multilang-errordoc.conf
  449.  
  450. # Fancy directory listings
  451. #Include conf/extra/httpd-autoindex.conf
  452.  
  453. # Language settings
  454. #Include conf/extra/httpd-languages.conf
  455.  
  456. # User home directories
  457. #Include conf/extra/httpd-userdir.conf
  458.  
  459. # Real-time info on requests and configuration
  460. #Include conf/extra/httpd-info.conf
  461.  
  462. # Virtual hosts
  463. #Include conf/extra/httpd-vhosts.conf
  464.  
  465. <Directory "D:\Gru_3ID13A\Strona_www\student">
  466. Options Indexes FollowSymLinks
  467. AllowOverride None
  468. Order allow,deny
  469. Allow from all
  470. </Directory>
  471.  
  472. <Directory "D:\Gru_3ID13A\Strona_www\wykladowca">
  473. AllowOverride AuthConfig
  474. AuthType Basic
  475. AuthName hasla
  476. AuthUserFile "D:\Gru_3ID13A\Strona_www\wykladowca\haslo.has"
  477. Require valid-user
  478. </Directory>
  479.  
  480. <Directory "C:\oprogramowanie\apache 2\htdocs\phpmyadmin">
  481. Options Indexes FollowSymLinks
  482. AllowOverride None
  483. Order allow,deny
  484. Allow from 127.0.0.1
  485. </Directory>
  486.  
  487. DirectoryIndex index.html index.php
  488.  
  489. NameVirtualHost 10.0.0.108
  490.  
  491. <VirtualHost 10.0.0.108:80>
  492. DocumentRoot "D:\Gru_3ID13A\Strona_www\student"
  493. ServerName www.student.pl
  494. ServerAdmin admin@student.pl
  495. ServerAlias student.pl
  496. </VirtualHost>
  497.  
  498. <VirtualHost 10.0.0.108:8080>
  499. DocumentRoot "D:\Gru_3ID13A\Strona_www\student80"
  500. ServerName www.student.pl
  501. ServerAdmin admin@student.pl
  502. ServerAlias student.pl
  503.  
  504. </VirtualHost>
  505.  
  506. <VirtualHost 10.0.0.108:80>
  507. DocumentRoot "D:\Gru_3ID13A\Strona_www\wykladowca"
  508. ServerName www.wykladowca.pl
  509. ServerAdmin admin@wykladowca.pl
  510. ServerAlias wykladowca.pl
  511. </VirtualHost>
  512.  
  513. <VirtualHost 10.0.0.108:8080>
  514. DocumentRoot "D:\Gru_3ID13A\Strona_www\wykladowca80"
  515. ServerName www.wykladowca.pl
  516. ServerAdmin admin@wykladowca.pl
  517. ServerAlias wykladowca.pl
  518. </VirtualHost>
  519.  
  520. <VirtualHost 10.0.0.108:80>
  521. DocumentRoot "C:\oprogramowanie\apache 2\htdocs\phpmyadmin"
  522. ServerName www.phpmyadmin
  523. ServerAdmin admin@phpmyadmin.pl
  524. ServerAlias phpmyadmin
  525.  
  526. </VirtualHost>
  527.  
  528. # Local access to the Apache HTTP Server Manual
  529. #Include conf/extra/httpd-manual.conf
  530.  
  531. # Distributed authoring and versioning (WebDAV)
  532. #Include conf/extra/httpd-dav.conf
  533.  
  534. # Various default settings
  535. #Include conf/extra/httpd-default.conf
  536.  
  537. # Secure (SSL/TLS) connections
  538. #Include conf/extra/httpd-ssl.conf
  539. #
  540. # Note: The following must must be present to support
  541. #       starting without SSL on platforms with no /dev/random equivalent
  542. #       but a statically compiled-in mod_ssl.
  543. #
  544. <IfModule ssl_module>
  545. SSLRandomSeed startup builtin
  546. SSLRandomSeed connect builtin
  547. </IfModule>
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top