API tools faq
paste
Advertisement
terracotta

dmesg

terracotta
Dec 28th, 2023
52
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 45.39 KB | None | 0 0
raw download clone embed print report
  1. 0.000000] Linux version 6.1.67-gentoo-dist (portage@localhost) (i686-pc-linux-gnu-gcc (Gentoo 13.2.1_p20230826 p7) 13.2.1 20230826, GNU ld (Gentoo 2.40 p5) 2.40.0) #1 SMP PREEMPT_DYNAMIC Sat Dec 23 23:53:33 CET 2023
  2. [ 0.000000] Disabled fast string operations
  3. [ 0.000000] BIOS-provided physical RAM map:
  4. [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dbff] usable
  5. [ 0.000000] BIOS-e820: [mem 0x000000000009dc00-0x000000000009ffff] reserved
  6. [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
  7. [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006fedffff] usable
  8. [ 0.000000] BIOS-e820: [mem 0x000000006fee0000-0x000000006fee4fff] ACPI data
  9. [ 0.000000] BIOS-e820: [mem 0x000000006fee5000-0x000000006fefffff] ACPI NVS
  10. [ 0.000000] BIOS-e820: [mem 0x000000006ff00000-0x000000007fffffff] reserved
  11. [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
  12. [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
  13. [ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
  14. [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
  15. [ 0.000000] SMBIOS 2.4 present.
  16. [ 0.000000] DMI: FUJITSU SIEMENS AMILO Li1705/AMILO Li1705, BIOS 1.0D-2308-8A20 08/13/2007
  17. [ 0.000000] tsc: Fast TSC calibration failed
  18. [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
  19. [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
  20. [ 0.000000] last_pfn = 0x6fee0 max_arch_pfn = 0x100000
  21. [ 0.000000] x86/PAT: PAT not supported by the CPU.
  22. [ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC
  23. [ 0.000000] found SMP MP-table at [mem 0x000f8d90-0x000f8d9f]
  24. [ 0.000000] initial memory mapped: [mem 0x00000000-0x1bffffff]
  25. [ 0.000000] RAMDISK: [mem 0x326fd000-0x35375fff]
  26. [ 0.000000] ACPI: Early table checksum verification disabled
  27. [ 0.000000] ACPI: RSDP 0x00000000000F8CE0 000014 (v00 PTLTD )
  28. [ 0.000000] ACPI: RSDT 0x000000006FEE039B 000038 (v01 FSC PC 06040000 LTP 00000000)
  29. [ 0.000000] ACPI: FACP 0x000000006FEE4D70 000074 (v01 FIC VA250 06040000 PTL_ 000F4240)
  30. [ 0.000000] ACPI: DSDT 0x000000006FEE0E12 003F5E (v01 FIC VA250 06040000 MSFT 0100000E)
  31. [ 0.000000] ACPI: FACS 0x000000006FEE5FC0 000040
  32. [ 0.000000] ACPI: APIC 0x000000006FEE4DE4 00006A (v01 PTLTD ? APIC 06040000 LTP 00000000)
  33. [ 0.000000] ACPI: MCFG 0x000000006FEE4E4E 00003C (v01 PTLTD MCFG 06040000 LTP 00000000)
  34. [ 0.000000] ACPI: SLIC 0x000000006FEE4E8A 000176 (v01 FSC PC 06040000 00000000)
  35. [ 0.000000] ACPI: SSDT 0x000000006FEE03D3 000519 (v01 PmRef CpuPm 00003000 INTL 20050228)
  36. [ 0.000000] ACPI: Reserving FACP table memory at [mem 0x6fee4d70-0x6fee4de3]
  37. [ 0.000000] ACPI: Reserving DSDT table memory at [mem 0x6fee0e12-0x6fee4d6f]
  38. [ 0.000000] ACPI: Reserving FACS table memory at [mem 0x6fee5fc0-0x6fee5fff]
  39. [ 0.000000] ACPI: Reserving APIC table memory at [mem 0x6fee4de4-0x6fee4e4d]
  40. [ 0.000000] ACPI: Reserving MCFG table memory at [mem 0x6fee4e4e-0x6fee4e89]
  41. [ 0.000000] ACPI: Reserving SLIC table memory at [mem 0x6fee4e8a-0x6fee4fff]
  42. [ 0.000000] ACPI: Reserving SSDT table memory at [mem 0x6fee03d3-0x6fee08eb]
  43. [ 0.000000] 914MB HIGHMEM available.
  44. [ 0.000000] 875MB LOWMEM available.
  45. [ 0.000000] mapped low ram: 0 - 36bfe000
  46. [ 0.000000] low ram: 0 - 36bfe000
  47. [ 0.000000] Zone ranges:
  48. [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
  49. [ 0.000000] Normal [mem 0x0000000001000000-0x0000000036bfdfff]
  50. [ 0.000000] HighMem [mem 0x0000000036bfe000-0x000000006fedffff]
  51. [ 0.000000] Movable zone start for each node
  52. [ 0.000000] Early memory node ranges
  53. [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009cfff]
  54. [ 0.000000] node 0: [mem 0x0000000000100000-0x000000006fedffff]
  55. [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000006fedffff]
  56. [ 0.000000] On node 0, zone DMA: 1 pages in unavailable ranges
  57. [ 0.000000] On node 0, zone DMA: 99 pages in unavailable ranges
  58. [ 0.000000] On node 0, zone HighMem: 288 pages in unavailable ranges
  59. [ 0.000000] Using APIC driver default
  60. [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
  61. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
  62. [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
  63. [ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
  64. [ 0.000000] IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
  65. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  66. [ 0.000000] ACPI: Using ACPI (MADT) for SMP configuration information
  67. [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
  68. [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
  69. [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
  70. [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
  71. [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000dffff]
  72. [ 0.000000] PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
  73. [ 0.000000] [mem 0x80000000-0xfebfffff] available for PCI devices
  74. [ 0.000000] Booting paravirtualized kernel on bare hardware
  75. [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
  76. [ 0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1
  77. [ 0.000000] percpu: Embedded 33 pages/cpu s103380 r0 d31788 u135168
  78. [ 0.000000] pcpu-alloc: s103380 r0 d31788 u135168 alloc=33*4096
  79. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  80. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 456174
  81. [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-6.1.67-gentoo-dist root=UUID=e57bc261-00a1-4183-a870-00f4941cef48 ro
  82. [ 0.000000] Unknown kernel command line parameters "BOOT_IMAGE=/vmlinuz-6.1.67-gentoo-dist", will be passed to user space.
  83. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
  84. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
  85. [ 0.000000] mem auto-init: stack:all(zero), heap alloc:off, heap free:off
  86. [ 0.000000] Initializing HighMem for node 0 (00036bfe:0006fee0)
  87. [ 0.000000] Initializing Movable for node 0 (00000000:00000000)
  88. [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
  89. [ 0.000000] Memory: 1743232K/1833456K available (13813K kernel code, 2165K rwdata, 4572K rodata, 1060K init, 796K bss, 90224K reserved, 0K cma-reserved, 936840K highmem)
  90. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  91. [ 0.000000] ftrace: allocating 50608 entries in 99 pages
  92. [ 0.000000] ftrace: allocated 99 pages with 4 groups
  93. [ 0.000000] trace event string verifier disabled
  94. [ 0.000000] Dynamic Preempt: voluntary
  95. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  96. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
  97. [ 0.000000] Trampoline variant of Tasks RCU enabled.
  98. [ 0.000000] Rude variant of Tasks RCU enabled.
  99. [ 0.000000] Tracing variant of Tasks RCU enabled.
  100. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
  101. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
  102. [ 0.000000] NR_IRQS: 2304, nr_irqs: 512, preallocated irqs: 16
  103. [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
  104. [ 0.000000] kfence: initialized - using 2097152 bytes for 255 objects at 0x(ptrval)-0x(ptrval)
  105. [ 0.000000] Console: colour VGA+ 80x25
  106. [ 0.000000] printk: console [tty0] enabled
  107. [ 0.000000] ACPI: Core revision 20220331
  108. [ 0.003333] APIC: Switch to symmetric I/O mode setup
  109. [ 0.003333] Enabling APIC mode: Flat. Using 2 I/O APICs
  110. [ 0.003333] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
  111. [ 0.003333] ..MP-BIOS bug: 8254 timer not connected to IO-APIC
  112. [ 0.003333] ...trying to set up timer (IRQ0) through the 8259A ...
  113. [ 0.003333] ..... (found apic 0 pin 0) ...
  114. [ 0.019999] ....... works.
  115. [ 0.023333] tsc: PIT calibration matches PMTIMER. 1 loops
  116. [ 0.023333] tsc: Detected 1861.978 MHz processor
  117. [ 0.000014] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x35adbc328e8, max_idle_ns: 881590574600 ns
  118. [ 0.000125] Calibrating delay loop (skipped), value calculated using timer frequency.. 3725.12 BogoMIPS (lpj=6206593)
  119. [ 0.000252] Disabled fast string operations
  120. [ 0.000356] CPU0: Thermal monitoring enabled (TM1)
  121. [ 0.000488] process: using mwait in idle threads
  122. [ 0.000600] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
  123. [ 0.000678] Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8, 1GB 0
  124. [ 0.000765] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
  125. [ 0.000861] Spectre V2 : Mitigation: Retpolines
  126. [ 0.000934] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
  127. [ 0.001023] Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
  128. [ 0.001101] L1TF: Kernel not compiled for PAE. No mitigation for L1TF
  129. [ 0.001185] MDS: Vulnerable: Clear CPU buffers attempted, no microcode
  130. [ 0.001263] MMIO Stale Data: Unknown: No mitigations
  131. [ 0.001345] x86/fpu: x87 FPU will use FXSAVE
  132. [ 0.002948] Freeing SMP alternatives memory: 44K
  133. [ 0.003028] pid_max: default: 32768 minimum: 301
  134. [ 0.003999] LSM: Security Framework initializing
  135. [ 0.004090] Yama: becoming mindful.
  136. [ 0.004479] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  137. [ 0.004586] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
  138. [ 0.116372] smpboot: CPU0: Genuine Intel(R) CPU T2130 @ 1.86GHz (family: 0x6, model: 0xe, stepping: 0xc)
  139. [ 0.116786] cblist_init_generic: Setting adjustable number of callback queues.
  140. [ 0.116786] cblist_init_generic: Setting shift to 1 and lim to 1.
  141. [ 0.116786] cblist_init_generic: Setting adjustable number of callback queues.
  142. [ 0.116786] cblist_init_generic: Setting shift to 1 and lim to 1.
  143. [ 0.116786] cblist_init_generic: Setting adjustable number of callback queues.
  144. [ 0.116786] cblist_init_generic: Setting shift to 1 and lim to 1.
  145. [ 0.116786] Performance Events: Core events, core PMU driver.
  146. [ 0.116786] ... version: 1
  147. [ 0.116786] ... bit width: 40
  148. [ 0.116786] ... generic registers: 2
  149. [ 0.116786] ... value mask: 000000ffffffffff
  150. [ 0.116786] ... max period: 000000007fffffff
  151. [ 0.116786] ... fixed-purpose events: 0
  152. [ 0.116786] ... event mask: 0000000000000003
  153. [ 0.116786] signal: max sigframe size: 1440
  154. [ 0.116786] rcu: Hierarchical SRCU implementation.
  155. [ 0.116786] rcu: Max phase no-delay instances is 1000.
  156. [ 0.117821] smp: Bringing up secondary CPUs ...
  157. [ 0.118507] x86: Booting SMP configuration:
  158. [ 0.118581] .... node #0, CPUs: #1
  159. [ 0.000000] Disabled fast string operations
  160. [ 0.136509] smp: Brought up 1 node, 2 CPUs
  161. [ 0.136944] smpboot: Max logical packages: 1
  162. [ 0.137016] smpboot: Total of 2 processors activated (7450.24 BogoMIPS)
  163. [ 0.141995] allocated 1835008 bytes of page_ext
  164. [ 0.142786] devtmpfs: initialized
  165. [ 0.144703] ACPI: PM: Registering ACPI NVS region [mem 0x6fee5000-0x6fefffff] (110592 bytes)
  166. [ 0.145120] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
  167. [ 0.145227] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
  168. [ 0.145741] pinctrl core: initialized pinctrl subsystem
  169. [ 0.146346] PM: RTC time: 13:10:38, date: 2023-12-28
  170. [ 0.147681] NET: Registered PF_NETLINK/PF_ROUTE protocol family
  171. [ 0.149340] audit: initializing netlink subsys (disabled)
  172. [ 0.149649] audit: type=2000 audit(1703769037.169:1): state=initialized audit_enabled=0 res=1
  173. [ 0.150174] thermal_sys: Registered thermal governor 'fair_share'
  174. [ 0.150182] thermal_sys: Registered thermal governor 'bang_bang'
  175. [ 0.150259] thermal_sys: Registered thermal governor 'step_wise'
  176. [ 0.150333] thermal_sys: Registered thermal governor 'user_space'
  177. [ 0.150605] cpuidle: using governor menu
  178. [ 0.151091] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
  179. [ 0.151672] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  180. [ 0.151781] PCI: not using MMCONFIG
  181. [ 0.152251] PCI: BIOS BUG #81[000fdd40] found
  182. [ 0.152324] PCI: Using configuration type 1 for base access
  183. [ 0.152820] mtrr: your CPUs had inconsistent variable MTRR settings
  184. [ 0.152898] mtrr: probably your BIOS does not setup all CPUs.
  185. [ 0.152970] mtrr: corrected configuration.
  186. [ 0.164173] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
  187. [ 0.262520] HugeTLB: registered 4.00 MiB page size, pre-allocated 0 pages
  188. [ 0.262615] HugeTLB: 0 KiB vmemmap can be freed for a 4.00 MiB page
  189. [ 0.263563] cryptd: max_cpu_qlen set to 1000
  190. [ 0.265052] raid6: skipped pq benchmark and selected sse2x2
  191. [ 0.265134] raid6: using intx1 recovery algorithm
  192. [ 0.265721] ACPI: Added _OSI(Module Device)
  193. [ 0.265795] ACPI: Added _OSI(Processor Device)
  194. [ 0.265867] ACPI: Added _OSI(3.0 _SCP Extensions)
  195. [ 0.265939] ACPI: Added _OSI(Processor Aggregator Device)
  196. [ 0.275371] ACPI: 2 ACPI AML tables successfully acquired and loaded
  197. [ 0.485052] ACPI: Dynamic OEM Table Load:
  198. [ 0.485158] ACPI: SSDT 0x00000000C121A400 00022A (v01 PmRef Cpu0Ist 00003000 INTL 20050228)
  199. [ 0.486542] ACPI: Dynamic OEM Table Load:
  200. [ 0.486542] ACPI: SSDT 0x00000000C18E8600 0001F0 (v01 PmRef Cpu0Cst 00003001 INTL 20050228)
  201. [ 0.486542] ACPI: Dynamic OEM Table Load:
  202. [ 0.486542] ACPI: SSDT 0x00000000C1808B40 000087 (v01 PmRef Cpu1Ist 00003000 INTL 20050228)
  203. [ 0.486542] ACPI: Dynamic OEM Table Load:
  204. [ 0.486542] ACPI: SSDT 0x00000000C1808000 000085 (v01 PmRef Cpu1Cst 00003000 INTL 20050228)
  205. [ 0.491196] ACPI: Interpreter enabled
  206. [ 0.491350] ACPI: PM: (supports S0 S3 S4 S5)
  207. [ 0.491423] ACPI: Using IOAPIC for interrupt routing
  208. [ 0.491635] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
  209. [ 0.491841] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
  210. [ 0.491934] PCI: Using MMCONFIG for extended config space
  211. [ 0.492027] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
  212. [ 0.492117] PCI: Using E820 reservations for host bridge windows
  213. [ 0.494282] ACPI: Enabled 8 GPEs in block 00 to 0F
  214. [ 0.508932] ACPI: PM: Power Resource [PFAN]
  215. [ 0.510176] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  216. [ 0.510276] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
  217. [ 0.510542] acpi PNP0A03:00: host bridge window [io 0x0cf8-0x0cff] (ignored)
  218. [ 0.510553] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7 window] (ignored)
  219. [ 0.510562] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff window] (ignored)
  220. [ 0.510570] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff window] (ignored)
  221. [ 0.510579] acpi PNP0A03:00: host bridge window [mem 0x000c0000-0x000c3fff window] (ignored)
  222. [ 0.510588] acpi PNP0A03:00: host bridge window [mem 0x000c4000-0x000c7fff window] (ignored)
  223. [ 0.510596] acpi PNP0A03:00: host bridge window [mem 0x000c8000-0x000cbfff window] (ignored)
  224. [ 0.510604] acpi PNP0A03:00: host bridge window [mem 0x000cc000-0x000cffff window] (ignored)
  225. [ 0.510613] acpi PNP0A03:00: host bridge window [mem 0x80000000-0xfff7ffff window] (ignored)
  226. [ 0.510621] PCI: root bus 00: using default resources
  227. [ 0.511513] PCI host bridge to bus 0000:00
  228. [ 0.511590] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
  229. [ 0.511671] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
  230. [ 0.511753] pci_bus 0000:00: root bus resource [bus 00-ff]
  231. [ 0.511931] pci 0000:00:00.0: [1106:0364] type 00 class 0x060000
  232. [ 0.512031] pci 0000:00:00.0: reg 0x10: [mem 0xc0000000-0xc7ffffff pref]
  233. [ 0.512441] pci 0000:00:00.1: [1106:1364] type 00 class 0x060000
  234. [ 0.512760] pci 0000:00:00.2: [1106:2364] type 00 class 0x060000
  235. [ 0.513088] pci 0000:00:00.3: [1106:3364] type 00 class 0x060000
  236. [ 0.513622] pci 0000:00:00.4: [1106:4364] type 00 class 0x060000
  237. [ 0.513950] pci 0000:00:00.5: [1106:5364] type 00 class 0x080020
  238. [ 0.514449] pci 0000:00:00.6: [1106:6364] type 00 class 0x060000
  239. [ 0.514794] pci 0000:00:00.7: [1106:7364] type 00 class 0x060000
  240. [ 0.515237] pci 0000:00:01.0: [1106:b198] type 01 class 0x060400
  241. [ 0.515739] pci 0000:00:02.0: [1106:a364] type 01 class 0x060400
  242. [ 0.515986] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
  243. [ 0.516355] pci 0000:00:03.0: [1106:c364] type 01 class 0x060400
  244. [ 0.516616] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
  245. [ 0.517040] pci 0000:00:0f.0: [1106:0591] type 00 class 0x01018f
  246. [ 0.517145] pci 0000:00:0f.0: reg 0x10: [io 0x4c70-0x4c77]
  247. [ 0.517235] pci 0000:00:0f.0: reg 0x14: [io 0x4c64-0x4c67]
  248. [ 0.517324] pci 0000:00:0f.0: reg 0x18: [io 0x4c68-0x4c6f]
  249. [ 0.517412] pci 0000:00:0f.0: reg 0x1c: [io 0x4c60-0x4c63]
  250. [ 0.517500] pci 0000:00:0f.0: reg 0x20: [io 0x4c40-0x4c4f]
  251. [ 0.517588] pci 0000:00:0f.0: reg 0x24: [io 0x4400-0x44ff]
  252. [ 0.518037] pci 0000:00:0f.1: [1106:0571] type 00 class 0x01018a
  253. [ 0.518186] pci 0000:00:0f.1: reg 0x20: [io 0x4c50-0x4c5f]
  254. [ 0.518291] pci 0000:00:0f.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7]
  255. [ 0.518371] pci 0000:00:0f.1: legacy IDE quirk: reg 0x14: [io 0x03f6]
  256. [ 0.518449] pci 0000:00:0f.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177]
  257. [ 0.518528] pci 0000:00:0f.1: legacy IDE quirk: reg 0x1c: [io 0x0376]
  258. [ 0.518976] pci 0000:00:10.0: [1106:3038] type 00 class 0x0c0300
  259. [ 0.519123] pci 0000:00:10.0: reg 0x20: [io 0x4c00-0x4c1f]
  260. [ 0.519273] pci 0000:00:10.0: supports D1 D2
  261. [ 0.519347] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
  262. [ 0.519744] pci 0000:00:10.1: [1106:3038] type 00 class 0x0c0300
  263. [ 0.519891] pci 0000:00:10.1: reg 0x20: [io 0x4c20-0x4c3f]
  264. [ 0.520040] pci 0000:00:10.1: supports D1 D2
  265. [ 0.520114] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot D3cold
  266. [ 0.520545] pci 0000:00:10.4: [1106:3104] type 00 class 0x0c0320
  267. [ 0.520648] pci 0000:00:10.4: reg 0x10: [mem 0xc9400000-0xc94000ff]
  268. [ 0.520844] pci 0000:00:10.4: supports D1 D2
  269. [ 0.520918] pci 0000:00:10.4: PME# supported from D0 D1 D2 D3hot D3cold
  270. [ 0.521340] pci 0000:00:11.0: [1106:3337] type 00 class 0x060100
  271. [ 0.522035] pci 0000:00:11.7: [1106:287e] type 00 class 0x060000
  272. [ 0.522400] pci 0000:00:12.0: [1106:3065] type 00 class 0x020000
  273. [ 0.522504] pci 0000:00:12.0: reg 0x10: [io 0x4800-0x48ff]
  274. [ 0.522593] pci 0000:00:12.0: reg 0x14: [mem 0xc9400400-0xc94004ff]
  275. [ 0.522778] pci 0000:00:12.0: supports D1 D2
  276. [ 0.522852] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
  277. [ 0.523309] pci 0000:00:13.0: [1106:337b] type 01 class 0x060400
  278. [ 0.523818] pci 0000:00:13.1: [1106:337a] type 01 class 0x060401
  279. [ 0.524358] pci_bus 0000:01: extended config space not accessible
  280. [ 0.524575] pci 0000:01:00.0: [1106:3371] type 00 class 0x030000
  281. [ 0.524677] pci 0000:01:00.0: reg 0x10: [mem 0xa0000000-0xbfffffff pref]
  282. [ 0.524768] pci 0000:01:00.0: reg 0x14: [mem 0xc8000000-0xc8ffffff]
  283. [ 0.524896] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
  284. [ 0.525005] pci 0000:01:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
  285. [ 0.525134] pci 0000:01:00.0: supports D1 D2
  286. [ 0.525544] pci 0000:00:01.0: PCI bridge to [bus 01]
  287. [ 0.525629] pci 0000:00:01.0: bridge window [mem 0xc8000000-0xc8ffffff]
  288. [ 0.525711] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff pref]
  289. [ 0.525902] pci 0000:00:02.0: PCI bridge to [bus 02]
  290. [ 0.526093] pci 0000:00:03.0: PCI bridge to [bus 03]
  291. [ 0.526173] pci 0000:00:03.0: bridge window [io 0x7000-0x7fff]
  292. [ 0.526254] pci 0000:00:03.0: bridge window [mem 0xc9000000-0xc90fffff]
  293. [ 0.526375] pci_bus 0000:04: extended config space not accessible
  294. [ 0.526593] pci 0000:04:01.0: [1106:3288] type 00 class 0x040300
  295. [ 0.526700] pci 0000:04:01.0: reg 0x10: [mem 0xc9100000-0xc9103fff 64bit]
  296. [ 0.526918] pci 0000:04:01.0: PME# supported from D0 D3hot D3cold
  297. [ 0.527301] pci 0000:04:01.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
  298. [ 0.527454] pci 0000:00:13.0: PCI bridge to [bus 04]
  299. [ 0.527536] pci 0000:00:13.0: bridge window [mem 0xc9100000-0xc91fffff]
  300. [ 0.527677] pci_bus 0000:05: extended config space not accessible
  301. [ 0.527833] pci 0000:05:01.0: [168c:001a] type 00 class 0x020000
  302. [ 0.527937] pci 0000:05:01.0: reg 0x10: [mem 0xc9000000-0xc900ffff]
  303. [ 0.528344] pci 0000:00:13.1: PCI bridge to [bus 05] (subtractive decode)
  304. [ 0.528433] pci 0000:00:13.1: bridge window [mem 0xc9000000-0xc90fffff]
  305. [ 0.528519] pci 0000:00:13.1: bridge window [io 0x0000-0xffff] (subtractive decode)
  306. [ 0.528608] pci 0000:00:13.1: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
  307. [ 0.528739] pci_bus 0000:00: on NUMA node 0
  308. [ 0.529143] ACPI: PCI: Interrupt link ALKA configured for IRQ 9
  309. [ 0.529222] ACPI: PCI: Interrupt link ALKA disabled
  310. [ 0.529493] ACPI: PCI: Interrupt link ALKB configured for IRQ 10
  311. [ 0.529571] ACPI: PCI: Interrupt link ALKB disabled
  312. [ 0.529836] ACPI: PCI: Interrupt link ALKC configured for IRQ 11
  313. [ 0.529913] ACPI: PCI: Interrupt link ALKC disabled
  314. [ 0.530195] ACPI: PCI: Interrupt link ALKD configured for IRQ 0
  315. [ 0.530273] ACPI: PCI: Interrupt link ALKD disabled
  316. [ 0.530613] ACPI: PCI: Interrupt link LNKA configured for IRQ 9
  317. [ 0.530945] ACPI: PCI: Interrupt link LNKB configured for IRQ 10
  318. [ 0.531275] ACPI: PCI: Interrupt link LNKC configured for IRQ 11
  319. [ 0.531555] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
  320. [ 0.531632] ACPI: PCI: Interrupt link LNKD disabled
  321. [ 0.536954] iommu: Default domain type: Translated
  322. [ 0.536954] iommu: DMA domain TLB invalidation policy: lazy mode
  323. [ 0.537546] SCSI subsystem initialized
  324. [ 0.537821] libata version 3.00 loaded.
  325. [ 0.537821] ACPI: bus type USB registered
  326. [ 0.537821] usbcore: registered new interface driver usbfs
  327. [ 0.537821] usbcore: registered new interface driver hub
  328. [ 0.537821] usbcore: registered new device driver usb
  329. [ 0.537821] pps_core: LinuxPPS API ver. 1 registered
  330. [ 0.537821] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  331. [ 0.537821] PTP clock support registered
  332. [ 0.540199] EDAC MC: Ver: 3.0.0
  333. [ 0.541125] NetLabel: Initializing
  334. [ 0.541202] NetLabel: domain hash size = 128
  335. [ 0.541272] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  336. [ 0.541414] NetLabel: unlabeled traffic allowed by default
  337. [ 0.541505] mctp: management component transport protocol core
  338. [ 0.541580] NET: Registered PF_MCTP protocol family
  339. [ 0.541668] PCI: Using ACPI for IRQ routing
  340. [ 0.548954] PCI: pci_cache_line_size set to 64 bytes
  341. [ 0.548974] pci 0000:00:13.1: can't claim BAR 14 [mem 0xc9000000-0xc90fffff]: address conflict with PCI Bus 0000:03 [mem 0xc9000000-0xc90fffff]
  342. [ 0.549146] pci 0000:05:01.0: can't claim BAR 0 [mem 0xc9000000-0xc900ffff]: address conflict with PCI Bus 0000:03 [mem 0xc9000000-0xc90fffff]
  343. [ 0.549296] e820: reserve RAM buffer [mem 0x0009dc00-0x0009ffff]
  344. [ 0.549305] e820: reserve RAM buffer [mem 0x6fee0000-0x6fffffff]
  345. [ 0.550221] pci 0000:01:00.0: vgaarb: setting as boot VGA device
  346. [ 0.550257] pci 0000:01:00.0: vgaarb: bridge control possible
  347. [ 0.551153] pci 0000:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
  348. [ 0.553466] vgaarb: loaded
  349. [ 0.570122] clocksource: Switched to clocksource tsc-early
  350. [ 0.676692] VFS: Disk quotas dquot_6.6.0
  351. [ 0.676950] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  352. [ 0.677394] pnp: PnP ACPI init
  353. [ 0.677987] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
  354. [ 0.678081] system 00:00: [mem 0xf0012000-0xf0012fff] has been reserved
  355. [ 0.678164] system 00:00: [mem 0xf0013000-0xf0013fff] has been reserved
  356. [ 0.679130] pnp 00:02: disabling [mem 0x000c0000-0x000cffff] because it overlaps 0000:01:00.0 BAR 6 [mem 0x000c0000-0x000dffff]
  357. [ 0.679317] system 00:02: [mem 0x00000000-0x0009ffff] could not be reserved
  358. [ 0.679402] system 00:02: [mem 0x000e0000-0x000fffff] could not be reserved
  359. [ 0.679486] system 00:02: [mem 0xe0000000-0xe01010ff] has been reserved
  360. [ 0.679568] system 00:02: [mem 0xe00100ff-0xe00190fe] has been reserved
  361. [ 0.679650] system 00:02: [mem 0xe00700ff-0xe007a0fe] has been reserved
  362. [ 0.679732] system 00:02: [mem 0xe00800ff-0xe00a00fe] has been reserved
  363. [ 0.679817] system 00:02: [mem 0xe01000ff-0xe06000fe] could not be reserved
  364. [ 0.679898] system 00:02: [mem 0xf00120ff-0xf00140fe] could not be reserved
  365. [ 0.679981] system 00:02: [mem 0xffb80000-0xffc7ffff] has been reserved
  366. [ 0.680089] system 00:02: [mem 0xfff00000-0xffffffff] has been reserved
  367. [ 0.680172] system 00:02: [mem 0xffee0000-0xffefffff] has been reserved
  368. [ 0.680253] system 00:02: [mem 0xfec00000-0xfec0ffff] could not be reserved
  369. [ 0.680335] system 00:02: [mem 0xfee00000-0xfee0ffff] could not be reserved
  370. [ 0.680903] system 00:03: [io 0x04d0-0x04d1] has been reserved
  371. [ 0.680989] system 00:03: [io 0xfe10-0xfe11] has been reserved
  372. [ 0.681068] system 00:03: [io 0xfe00] has been reserved
  373. [ 0.681145] system 00:03: [io 0x4000-0x407f] has been reserved
  374. [ 0.681224] system 00:03: [io 0x4100-0x411f] has been reserved
  375. [ 0.682750] pnp: PnP ACPI: found 6 devices
  376. [ 0.726325] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
  377. [ 0.726924] NET: Registered PF_INET protocol family
  378. [ 0.727420] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
  379. [ 0.729947] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
  380. [ 0.730085] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
  381. [ 0.730323] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
  382. [ 0.730530] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
  383. [ 0.730810] TCP: Hash tables configured (established 8192 bind 8192)
  384. [ 0.731267] MPTCP token hash table entries: 1024 (order: 2, 16384 bytes, linear)
  385. [ 0.731454] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
  386. [ 0.731564] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
  387. [ 0.732078] NET: Registered PF_UNIX/PF_LOCAL protocol family
  388. [ 0.732188] NET: Registered PF_XDP protocol family
  389. [ 0.732293] pci 0000:00:02.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
  390. [ 0.732394] pci 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
  391. [ 0.732496] pci 0000:00:02.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000 add_align 100000
  392. [ 0.732596] pci 0000:00:03.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
  393. [ 0.732743] pci 0000:00:02.0: BAR 14: assigned [mem 0x80000000-0x801fffff]
  394. [ 0.732827] pci 0000:00:02.0: BAR 15: assigned [mem 0x80200000-0x803fffff 64bit pref]
  395. [ 0.732919] pci 0000:00:03.0: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
  396. [ 0.733011] pci 0000:00:13.1: BAR 14: assigned [mem 0x80600000-0x806fffff]
  397. [ 0.733098] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff]
  398. [ 0.733191] pci 0000:00:01.0: PCI bridge to [bus 01]
  399. [ 0.733273] pci 0000:00:01.0: bridge window [mem 0xc8000000-0xc8ffffff]
  400. [ 0.733355] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xbfffffff pref]
  401. [ 0.733479] pci 0000:00:02.0: PCI bridge to [bus 02]
  402. [ 0.733556] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]
  403. [ 0.733638] pci 0000:00:02.0: bridge window [mem 0x80000000-0x801fffff]
  404. [ 0.733719] pci 0000:00:02.0: bridge window [mem 0x80200000-0x803fffff 64bit pref]
  405. [ 0.733814] pci 0000:00:03.0: PCI bridge to [bus 03]
  406. [ 0.733890] pci 0000:00:03.0: bridge window [io 0x7000-0x7fff]
  407. [ 0.733972] pci 0000:00:03.0: bridge window [mem 0xc9000000-0xc90fffff]
  408. [ 0.734054] pci 0000:00:03.0: bridge window [mem 0x80400000-0x805fffff 64bit pref]
  409. [ 0.734152] pci 0000:00:13.0: PCI bridge to [bus 04]
  410. [ 0.734231] pci 0000:00:13.0: bridge window [mem 0xc9100000-0xc91fffff]
  411. [ 0.734323] pci 0000:05:01.0: BAR 0: assigned [mem 0x80600000-0x8060ffff]
  412. [ 0.734407] pci 0000:00:13.1: PCI bridge to [bus 05]
  413. [ 0.734486] pci 0000:00:13.1: bridge window [mem 0x80600000-0x806fffff]
  414. [ 0.734575] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
  415. [ 0.734653] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
  416. [ 0.734732] pci_bus 0000:01: resource 1 [mem 0xc8000000-0xc8ffffff]
  417. [ 0.734810] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xbfffffff pref]
  418. [ 0.734890] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
  419. [ 0.734967] pci_bus 0000:02: resource 1 [mem 0x80000000-0x801fffff]
  420. [ 0.735045] pci_bus 0000:02: resource 2 [mem 0x80200000-0x803fffff 64bit pref]
  421. [ 0.735133] pci_bus 0000:03: resource 0 [io 0x7000-0x7fff]
  422. [ 0.735210] pci_bus 0000:03: resource 1 [mem 0xc9000000-0xc90fffff]
  423. [ 0.735288] pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
  424. [ 0.735376] pci_bus 0000:04: resource 1 [mem 0xc9100000-0xc91fffff]
  425. [ 0.735455] pci_bus 0000:05: resource 1 [mem 0x80600000-0x806fffff]
  426. [ 0.735534] pci_bus 0000:05: resource 4 [io 0x0000-0xffff]
  427. [ 0.735610] pci_bus 0000:05: resource 5 [mem 0x00000000-0xffffffff]
  428. [ 0.735842] pci 0000:00:00.0: MSI quirk detected; MSI disabled
  429. [ 0.735977] pci 0000:00:01.0: disabling DAC on VIA PCI bridge
  430. [ 0.736061] pci 0000:00:02.0: disabling DAC on VIA PCI bridge
  431. [ 0.736143] pci 0000:00:03.0: disabling DAC on VIA PCI bridge
  432. [ 2.400154] pci 0000:00:10.4: EHCI: BIOS handoff failed (BIOS bug?) 01010001
  433. [ 2.400500] pci 0000:00:10.4: quirk_usb_early_handoff+0x0/0x6d0 took 1624458 usecs
  434. [ 2.400637] pci 0000:00:13.0: disabling DAC on VIA PCI bridge
  435. [ 2.400721] pci 0000:00:13.1: disabling DAC on VIA PCI bridge
  436. [ 2.400822] PCI: CLS 32 bytes, default 64
  437. [ 2.401138] Trying to unpack rootfs image as initramfs...
  438. [ 2.411307] apm: BIOS not found.
  439. [ 2.414436] Initialise system trusted keyrings
  440. [ 2.414766] Key type blacklist registered
  441. [ 2.415431] workingset: timestamp_bits=14 max_order=19 bucket_order=5
  442. [ 2.429349] zbud: loaded
  443. [ 2.436604] SGI XFS with ACLs, security attributes, scrub, quota, no debug enabled
  444. [ 2.484957] NET: Registered PF_ALG protocol family
  445. [ 2.485082] xor: measuring software checksum speed
  446. [ 2.489910] pIII_sse : 2086 MB/sec
  447. [ 2.494298] prefetch64-sse : 2294 MB/sec
  448. [ 2.494400] xor: using function: prefetch64-sse (2294 MB/sec)
  449. [ 2.494488] Key type asymmetric registered
  450. [ 2.494561] Asymmetric key parser 'x509' registered
  451. [ 3.413860] tsc: Refined TSC clocksource calibration: 1861.999 MHz
  452. [ 3.413984] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x35ade44ba74, max_idle_ns: 881590729106 ns
  453. [ 3.414138] clocksource: Switched to clocksource tsc
  454. [ 4.612931] Freeing initrd memory: 45540K
  455. [ 4.624203] alg: self-tests for CTR-KDF (hmac(sha256)) passed
  456. [ 4.624555] bounce: pool size: 64 pages
  457. [ 4.624844] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
  458. [ 4.625122] io scheduler mq-deadline registered
  459. [ 4.625202] io scheduler kyber registered
  460. [ 4.625524] io scheduler bfq registered
  461. [ 4.626713] atomic64_test: passed for i586+ platform with CX8 and with SSE
  462. [ 4.628557] ACPI: \_PR_.CPU0: Found 2 idle states
  463. [ 4.628850] ACPI: \_PR_.CPU1: Found 2 idle states
  464. [ 4.630365] ACPI: AC: AC Adapter [ACAD] (on-line)
  465. [ 4.630648] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
  466. [ 4.630856] ACPI: button: Power Button [PWRB]
  467. [ 4.631096] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
  468. [ 4.631336] ACPI: button: Lid Switch [LID]
  469. [ 4.631588] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
  470. [ 4.631821] ACPI: button: Power Button [PWRF]
  471. [ 4.632312] ACPI: \_PR_.CPU0: Found 2 idle states
  472. [ 4.632392] tsc: Marking TSC unstable due to TSC halts in idle
  473. [ 4.632679] clocksource: Checking clocksource tsc synchronization from CPU 1 to CPUs 0.
  474. [ 4.632836] clocksource: Switched to clocksource acpi_pm
  475. [ 4.633216] ACPI: \_PR_.CPU1: Found 2 idle states
  476. [ 4.639257] thermal LNXTHERM:00: registered as thermal_zone0
  477. [ 4.639342] ACPI: thermal: Thermal Zone [THRM] (44 C)
  478. [ 4.640219] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
  479. [ 4.640578] ACPI: battery: Slot [BAT0] (battery absent)
  480. [ 4.651123] Non-volatile memory driver v1.3
  481. [ 4.651239] Linux agpgart interface v0.103
  482. [ 4.651763] agpgart: Detected VIA P4M900 chipset
  483. [ 4.661454] agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xc0000000
  484. [ 4.661902] ACPI: bus type drm_connector registered
  485. [ 4.667302] ehci-pci 0000:00:10.4: EHCI Host Controller
  486. [ 4.667563] ehci-pci 0000:00:10.4: new USB bus registered, assigned bus number 1
  487. [ 4.667767] ehci-pci 0000:00:10.4: irq 21, io mem 0xc9400000
  488. [ 4.680173] ehci-pci 0000:00:10.4: USB 2.0 started, EHCI 1.00
  489. [ 4.680451] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
  490. [ 4.680546] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  491. [ 4.680634] usb usb1: Product: EHCI Host Controller
  492. [ 4.680708] usb usb1: Manufacturer: Linux 6.1.67-gentoo-dist ehci_hcd
  493. [ 4.680785] usb usb1: SerialNumber: 0000:00:10.4
  494. [ 4.681356] hub 1-0:1.0: USB hub found
  495. [ 4.681456] hub 1-0:1.0: 4 ports detected
  496. [ 4.683573] uhci_hcd 0000:00:10.0: UHCI Host Controller
  497. [ 4.683854] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
  498. [ 4.683954] uhci_hcd 0000:00:10.0: detected 2 ports
  499. [ 4.684101] uhci_hcd 0000:00:10.0: irq 20, io port 0x00004c00
  500. [ 4.684364] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
  501. [ 4.684459] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  502. [ 4.684547] usb usb2: Product: UHCI Host Controller
  503. [ 4.684621] usb usb2: Manufacturer: Linux 6.1.67-gentoo-dist uhci_hcd
  504. [ 4.684698] usb usb2: SerialNumber: 0000:00:10.0
  505. [ 4.685217] hub 2-0:1.0: USB hub found
  506. [ 4.685316] hub 2-0:1.0: 2 ports detected
  507. [ 4.686111] uhci_hcd 0000:00:10.1: UHCI Host Controller
  508. [ 4.686416] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 3
  509. [ 4.686514] uhci_hcd 0000:00:10.1: detected 2 ports
  510. [ 4.686638] uhci_hcd 0000:00:10.1: irq 22, io port 0x00004c20
  511. [ 4.686942] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
  512. [ 4.687038] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  513. [ 4.687126] usb usb3: Product: UHCI Host Controller
  514. [ 4.687200] usb usb3: Manufacturer: Linux 6.1.67-gentoo-dist uhci_hcd
  515. [ 4.687277] usb usb3: SerialNumber: 0000:00:10.1
  516. [ 4.687775] hub 3-0:1.0: USB hub found
  517. [ 4.687872] hub 3-0:1.0: 2 ports detected
  518. [ 4.688704] usbcore: registered new interface driver usbserial_generic
  519. [ 4.688804] usbserial: USB Serial support registered for generic
  520. [ 4.689206] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  521. [ 4.691789] i8042: Detected active multiplexing controller, rev 1.1
  522. [ 4.693275] serio: i8042 KBD port at 0x60,0x64 irq 1
  523. [ 4.693367] serio: i8042 AUX0 port at 0x60,0x64 irq 12
  524. [ 4.693737] serio: i8042 AUX1 port at 0x60,0x64 irq 12
  525. [ 4.693940] serio: i8042 AUX2 port at 0x60,0x64 irq 12
  526. [ 4.694137] serio: i8042 AUX3 port at 0x60,0x64 irq 12
  527. [ 4.694667] mousedev: PS/2 mouse device common for all mice
  528. [ 4.695459] rtc_cmos 00:01: RTC can wake from S4
  529. [ 4.696352] rtc_cmos 00:01: registered as rtc0
  530. [ 4.696501] rtc_cmos 00:01: setting system clock to 2023-12-28T13:10:42 UTC (1703769042)
  531. [ 4.696683] rtc_cmos 00:01: alarms up to one year, y3k, 242 bytes nvram
  532. [ 4.697074] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
  533. [ 4.697311] device-mapper: uevent: version 1.0.3
  534. [ 4.697817] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
  535. [ 4.698412] intel_pstate: CPU model not supported
  536. [ 4.699383] hid: raw HID events driver (C) Jiri Kosina
  537. [ 4.699619] usbcore: registered new interface driver usbhid
  538. [ 4.699695] usbhid: USB HID core driver
  539. [ 4.700350] drop_monitor: Initializing network drop monitor service
  540. [ 4.700774] Initializing XFRM netlink socket
  541. [ 4.701651] NET: Registered PF_INET6 protocol family
  542. [ 4.714460] Segment Routing with IPv6
  543. [ 4.714572] RPL Segment Routing with IPv6
  544. [ 4.714716] In-situ OAM (IOAM) with IPv6
  545. [ 4.714902] mip6: Mobile IPv6
  546. [ 4.714988] NET: Registered PF_PACKET protocol family
  547. [ 4.716272] microcode: sig=0x6ec, pf=0x80, revision=0x5b
  548. [ 4.716370] microcode: Microcode Update Driver: v2.2.
  549. [ 4.716395] IPI shorthand broadcast: enabled
  550. [ 4.716977] registered taskstats version 1
  551. [ 4.717316] Loading compiled-in X.509 certificates
  552. [ 4.717963] zswap: loaded using pool lzo/zbud
  553. [ 4.718701] Key type .fscrypt registered
  554. [ 4.718777] Key type fscrypt-provisioning registered
  555. [ 4.722538] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes
  556. [ 4.722816] Key type big_key registered
  557. [ 4.726512] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
  558. [ 4.734212] Key type encrypted registered
  559. [ 4.734343] ima: No TPM chip found, activating TPM-bypass!
  560. [ 4.734424] ima: Allocated hash algorithm: sha256
  561. [ 4.734547] ima: No architecture policies found
  562. [ 4.734666] evm: Initialising EVM extended attributes:
  563. [ 4.734739] evm: security.selinux
  564. [ 4.734808] evm: security.SMACK64 (disabled)
  565. [ 4.734878] evm: security.SMACK64EXEC (disabled)
  566. [ 4.734949] evm: security.SMACK64TRANSMUTE (disabled)
  567. [ 4.735021] evm: security.SMACK64MMAP (disabled)
  568. [ 4.735091] evm: security.apparmor
  569. [ 4.735159] evm: security.ima
  570. [ 4.735226] evm: security.capability
  571. [ 4.735295] evm: HMAC attrs: 0x1
  572. [ 4.746066] PM: Magic number: 3:138:181
  573. [ 4.746615] Unstable clock detected, switching default tracing clock to "global"
  574. If you want to keep using the local clock, then add:
  575. "trace_clock=local"
  576. on the kernel command line
  577. [ 4.754034] Freeing unused kernel image (initmem) memory: 1060K
  578. [ 4.773711] Write protecting kernel text and read-only data: 18388k
  579. [ 4.773814] Run /init as init process
  580. [ 4.773885] with arguments:
  581. [ 4.773891] /init
  582. [ 4.773896] with environment:
  583. [ 4.773901] HOME=/
  584. [ 4.773905] TERM=linux
  585. [ 4.773910] BOOT_IMAGE=/vmlinuz-6.1.67-gentoo-dist
  586. [ 5.038618] dracut: Gentoo-2.14
  587. [ 6.012006] ACPI: video: Video Device [VGA] (multi-head: yes rom: no post: no)
  588. [ 6.022409] pata_via 0000:00:0f.1: version 0.3.4
  589. [ 6.022605] sata_via 0000:00:0f.0: version 2.6
  590. [ 6.022911] sata_via 0000:00:0f.0: routed to hard irq line 10
  591. [ 6.038273] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio4/input/input11
  592. [ 6.067376] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:12/LNXVIDEO:00/input/input12
  593. [ 6.082491] scsi host0: pata_via
  594. [ 6.085969] scsi host1: sata_via
  595. [ 6.086718] scsi host2: pata_via
  596. [ 6.087929] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0x4c50 irq 14
  597. [ 6.088026] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x4c58 irq 15
  598. [ 6.089292] scsi host3: sata_via
  599. [ 6.110481] ata3: SATA max UDMA/133 cmd 0x4c70 ctl 0x4c64 bmdma 0x4c40 irq 21
  600. [ 6.110585] ata4: SATA max UDMA/133 cmd 0x4c68 ctl 0x4c60 bmdma 0x4c48 irq 21
  601. [ 6.246525] ata2.00: ATAPI: Optiarc DVD RW AD-7540A, 1.42, max UDMA/33
  602. [ 6.253569] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7540A 1.42 PQ: 0 ANSI: 5
  603. [ 6.284829] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
  604. [ 6.284946] cdrom: Uniform CD-ROM driver Revision: 3.20
  605. [ 6.316835] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  606. [ 6.335141] sr 2:0:0:0: Attached scsi CD-ROM sr0
  607. [ 6.335593] sr 2:0:0:0: Attached scsi generic sg0 type 5
  608. [ 6.511288] ata3.00: ATA-7: WDC WD1600BEVS-07RST0, 04.01G04, max UDMA/133
  609. [ 6.511386] ata3.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
  610. [ 6.517141] scsi 1:0:0:0: Direct-Access ATA WDC WD1600BEVS-0 1G04 PQ: 0 ANSI: 5
  611. [ 6.518839] sd 1:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
  612. [ 6.518962] sd 1:0:0:0: Attached scsi generic sg1 type 0
  613. [ 6.519010] sd 1:0:0:0: [sda] Write Protect is off
  614. [ 6.519120] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
  615. [ 6.519301] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  616. [ 6.519576] sd 1:0:0:0: [sda] Preferred minimum I/O size 512 bytes
  617. [ 6.538436] sda: sda1 sda2 sda3
  618. [ 6.539287] sd 1:0:0:0: [sda] Attached SCSI disk
  619. [ 6.723516] ata4: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
  620. [ 7.693451] XFS (sda3): Mounting V5 Filesystem
  621. [ 7.929025] XFS (sda3): Starting recovery (logdev: internal)
  622. [ 8.074729] XFS (sda3): Ending recovery (logdev: internal)
  623. [ 8.322625] dracut: Remounting /dev/disk/by-uuid/e57bc261-00a1-4183-a870-00f4941cef48 with -o defaults,noatime,ro
  624. [ 8.514782] dracut: Mounted root filesystem /dev/sda3
  625. [ 8.774852] dracut: Switching root
  626. [ 10.444718] random: crng init done
  627. [ 17.647857] via-rhine 0000:00:12.0 eth0: VIA Rhine II at 6b7478cc, 00:14:0b:3c:71:16, IRQ 23
  628. [ 17.648669] via-rhine 0000:00:12.0 eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link c541
  629. [ 17.882785] input: PC Speaker as /devices/platform/pcspkr/input/input13
  630. [ 18.504067] via-rhine 0000:00:12.0 enp0s18: renamed from eth0
  631. [ 18.721366] intel_powerclamp: No package C-state available
  632. [ 19.133130] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  633. [ 19.147618] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  634. [ 19.147664] Loading firmware: regulatory.db
  635. [ 19.813779] Loading firmware: regulatory.db.p7s
  636. [ 20.023790] ath5k 0000:05:01.0: registered as 'phy0'
  637. [ 20.513269] snd_hda_intel 0000:04:01.0: CORB reset timeout#1, CORBRP = 0
  638. [ 20.622788] ath: EEPROM regdomain: 0x30
  639. [ 20.622810] ath: EEPROM indicates we should expect a direct regpair map
  640. [ 20.622816] ath: Country alpha2 being used: AM
  641. [ 20.622821] ath: Regpair used: 0x30
  642. [ 20.622906] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  643. [ 20.624650] ath5k: phy0: Atheros AR2413 chip found (MAC: 0x78, PHY: 0x45)
  644. [ 20.633676] ath5k 0000:05:01.0 wlp5s1: renamed from wlan0
  645. [ 20.847382] snd_hda_codec_via hdaudioC0D0: autoconfig for VT1708: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
  646. [ 20.847410] snd_hda_codec_via hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  647. [ 20.847421] snd_hda_codec_via hdaudioC0D0: hp_outs=1 (0x20/0x0/0x0/0x0/0x0)
  648. [ 20.847432] snd_hda_codec_via hdaudioC0D0: mono: mono_out=0x0
  649. [ 20.847439] snd_hda_codec_via hdaudioC0D0: inputs:
  650. [ 20.847446] snd_hda_codec_via hdaudioC0D0: Mic=0x1d
  651. [ 20.931352] input: HDA VIA VT82xx Mic as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input14
  652. [ 20.931616] input: HDA VIA VT82xx Front Headphone as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input15
  653. [ 20.931853] input: HDA VIA VT82xx Speaker as /devices/pci0000:00/0000:00:13.0/0000:04:01.0/sound/card0/input16
  654. [ 21.679676] Truncating oversized swap area, only using 2097152k out of 4194300k
  655. [ 21.682129] Adding 2097148k swap on /dev/sda2. Priority:-2 extents:1 across:2097148k FS
  656. [ 21.883541] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none.
  657. [ 25.590994] 8021q: 802.1Q VLAN Support v1.8
  658. [ 25.947707] IPv6: ADDRCONF(NETDEV_CHANGE): enp0s18: link becomes ready
  659. [ 5111.722998] usb 1-4: new high-speed USB device number 2 using ehci-pci
  660. [ 5111.973632] usb 1-4: New USB device found, idVendor=24a9, idProduct=205a, bcdDevice= 2.00
  661. [ 5111.973647] usb 1-4: New USB device strings: Mfr=2, Product=3, SerialNumber=4
  662. [ 5111.973657] usb 1-4: Product: USB_0114
  663. [ 5111.973664] usb 1-4: Manufacturer: ASolid
  664. [ 5111.973672] usb 1-4: SerialNumber: 30562908
  665. [ 5112.359851] usb-storage 1-4:1.0: USB Mass Storage device detected
  666. [ 5112.360488] scsi host4: usb-storage 1-4:1.0
  667. [ 5112.360867] usbcore: registered new interface driver usb-storage
  668. [ 5112.368754] usbcore: registered new interface driver uas
  669. [ 5113.387227] scsi 4:0:0:0: Direct-Access ASolid USB 0000 PQ: 0 ANSI: 4
  670. [ 5113.388712] sd 4:0:0:0: Attached scsi generic sg2 type 0
  671. [ 5113.389202] sd 4:0:0:0: [sdb] 122664961 512-byte logical blocks: (62.8 GB/58.5 GiB)
  672. [ 5113.389826] sd 4:0:0:0: [sdb] Write Protect is off
  673. [ 5113.389836] sd 4:0:0:0: [sdb] Mode Sense: 23 00 00 00
  674. [ 5113.390479] sd 4:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  675. [ 5113.397219] sdb: sdb1 sdb2
  676. [ 5113.397601] sd 4:0:0:0: [sdb] Attached SCSI removable disk
  677. [ 5135.456606] fuse: init (API version 7.37)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!