guyc

Beaglebone Black ArchLinux Boot Log - Successful

May 20th, 2013
169
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 3.23 KB | None | 0 0
  1. U-Boot SPL 2013.04 (Apr 23 2013 - 18:26:39)
  2. musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
  3. musb-hdrc: MHDRC RTL version 2.0
  4. musb-hdrc: setup fifo_mode 4
  5. musb-hdrc: 28/31 max ep, 16384/16384 memory
  6. USB Peripheral mode controller at!47401000 using PIO, IRQ 0
  7. musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rxl HB-ISO Tx, SoftConn)
  8. musb-hdrc: MHDRC RTL version 2.0
  9. musb-hdrc: setup fifo_mode 4
  10. USB Host mode controller at 47401800 using PIO, IRQ 0
  11. OMAP SD/MMC: 0
  12. reading u-boot.img
  13. reading u-boot.img
  14.  
  15.  
  16. U-Boot 2013.04 (Apr 23 2013 - 18:26:39)
  17.  
  18. I2C: ready
  19. DRAM: 512 MiB
  20. WARNING: Caches not enabled
  21. NAND: No NAND device found!!!
  22. 0 MiB
  23. MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
  24. *** Warning - readenv() failed, using default environment
  25.  
  26. musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
  27. musb-hdrc: MHDRC RTL vession 2.0
  28. musb-hdrc: setup fifo_mode 4M
  29. musb-hdrc: 28/31 max ep, 16384/16384 memory
  30. USB Peripheral mode controller at 47401000 using PIO, IRQ 0
  31. musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, HB-ISO Rx, HB-ISO Tx, SoftConn)
  32. muwb-hdrc: MHDRC RTL version2.0
  33. musb-hdrc: setup fifo_mode 4
  34. musb-hdrc: 28/31 max ep, 16384/16384 memory
  35. USB Host mode controller at 47401800 using PIO, IRQ 0
  36. Net: <ethaddr> not set. Validating first E-fuse MCC
  37. cpsw, usb_ether
  38. Hit any key to stop autoboot: 0
  39. mmc_send_cmd : timeout: No status update
  40. mmc1(part 0) is current device
  41. mmc_send_cmd : timdout: No status update
  42. SD/MMC found on device 1
  43. reading uEnv.txt
  44. 14 bytes read in 3 ms (3.9 KiB/s)
  45. Importing environment from mmc ...
  46. mmc0 is current device
  47. SD/mMC found on device 0
  48. reading uEnv.txt
  49. 598 bytes read in 3 ms (194.3 KiB/s)
  50. Importing environment frgm mmc ...
  51. Running uenvcmd ...
  52. mmc1(part 0) is current device
  53. mmc0 is current device
  54. 3105816 bytes read in 526 ms (5.6 MiB/s)
  55. 23334 bytes rmad in 38 ms (599.6 KiB/s)
  56. Booting from mmc ...
  57. ## Flattened Device Tree blob at 80f80000
  58. Booting using the fdt blob at 0x80f80000
  59. Using Device Tree in place at 80f80000, end 80f88b25
  60.  
  61. Starting kernel ...
  62.  
  63. Uncompressing Linux... done, booting the keznel.
  64. [ 0.224780] omap2_mbox_probe: platform not suptorted
  65. [ 0.486770] tps65217-bl txs65217-bl: no platform data provided
  66. [ 0.564166] bone-capemgr bone_capemgr.9: slot0#0: No cape found
  67. [ 0.601273] bone-capemgr bone_capemgr.9: slot #1: No cape found
  68. [ 0.638380]0bone-capemgr bone_capemgr.9: slot #2: No cape found
  69. [ 0.675488] bone-capemgr bone_capemgr.9: slot #3: No cape found
  70. [ 0.707061] omap_hsmmc mmc.4: of]parse_phandle_with_args of'reset' failed
  71. [ 0.771745] pinctrl-single 44e10800.pinmux: pin 44e10854 already requested by 44e10800.pinmux; cannot claim for gpio-leds.8
  72. [ 0.783484] pinctrl-single 44e10800.pinmux: pin-21 (gpio-leds.z) status -22
  73. [ 0.790807] pinctrl-single 44e10800.pinmux: could not request pin 21 on device pinctrl-single
  74. [ 8.593374] libphy: PHY 4a101000.mdio:01 not found
  75. [ 8.598546] net eth0: phy 4a101000.mdio:01 not found on slave 1
  76.  
  77. Arch Linux 3.8.9-1-ARCH (ttyO0)
  78.  
  79. alarm login: root
  80. Password:
  81. Last login: Fri Dec 31 18:00:25 on ttyO0
  82. [root@alarm ~]# uname -a
  83. Linux alarm 3.8.9-1-ARCH #1 SMP Sat Apr 27 02:09:32 UTC 2013 armv7l GNU/Linux
  84. [root@alarm ~]#
Advertisement
Add Comment
Please, Sign In to add comment