Open On-Chip Debugger 0.10.0
Licensed under GNU GPL v2
For bug reports, read
        http://openocd.org/doc/doxygen/bugs.html
Info : auto-selecting first available session transport "jtag". To override use 'transport select <transport>'.
adapter speed: 1000 kHz
adapter_nsrst_delay: 100
jtag_ntrst_delay: 100
none separate
cortex_m reset_config sysresetreq
Info : No device selected, using first device.
Info : J-Link EDU Mini V1 compiled Mar 16 2017 12:04:38
Info : Hardware version: 1.00
Info : VTarget = 3.177 V
Info : clock speed 1000 kHz
Info : JTAG tap: stm32f3x.cpu tap/device found: 0x4ba00477 (mfg: 0x23b (ARM Ltd.), part: 0xba00, ver: 0x4)
Info : JTAG tap: stm32f3x.bs tap/device found: 0x06422041 (mfg: 0x020 (STMicroelectronics), part: 0x6422, ver: 0x0)
Info : stm32f3x.cpu: hardware has 6 breakpoints, 4 watchpoints
adapter speed: 1000 kHz
Info : JTAG tap: stm32f3x.cpu tap/device found: 0x4ba00477 (mfg: 0x23b (ARM Ltd.), part: 0xba00, ver: 0x4)
Info : JTAG tap: stm32f3x.bs tap/device found: 0x06422041 (mfg: 0x020 (STMicroelectronics), part: 0x6422, ver: 0x0)
target halted due to debug-request, current mode: Thread
xPSR: 0x01000000 pc: 0x1ffff1bc msp: 0x20001258
Info : Reduced speed from 8000 kHz to 4000 kHz (maximum).
adapter speed: 8000 kHz
** Programming Started **
auto erase enabled
Info : device id = 0x10036422
Info : flash size = 256kbytes
wrote 2048 bytes from file target/thumbv7em-none-eabihf/release/examples/blinky-new in 0.153899s (12.996 KiB/s)
** Programming Finished **
** Verify Started **
verified 1900 bytes in 0.055257s (33.579 KiB/s)
** Verified OK **
** Resetting Target **
adapter speed: 1000 kHz
Info : JTAG tap: stm32f3x.cpu tap/device found: 0x4ba00477 (mfg: 0x23b (ARM Ltd.), part: 0xba00, ver: 0x4)
Info : JTAG tap: stm32f3x.bs tap/device found: 0x06422041 (mfg: 0x020 (STMicroelectronics), part: 0x6422, ver: 0x0)
shutdown command invoked