Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
- [ 0.000000] Linux version 5.11.0-25-generic (buildd@bos02-arm64-006) (gcc (Ubuntu 10.3.0-1ubuntu1) 10.3.0, GNU ld (GNU Binutils for Ubuntu) 2.36.1) #27-Ubuntu SMP Fri Jul 9 18:41:54 UTC 2021 (Ubuntu 5.11.0-25.27-generic 5.11.22)
- [ 0.000000] efi: EFI v2.70 by EDK II
- [ 0.000000] efi: ACPI 2.0=0xef9f0018 SMBIOS 3.0=0xfacd0000 MEMATTR=0xeefca018 RNG=0xfaceb098 MEMRESERVE=0xeefc7d98
- [ 0.000000] efi: seeding entropy pool
- [ 0.000000] random: fast init done
- [ 0.000000] secureboot: Secure boot disabled
- [ 0.000000] ACPI: Early table checksum verification disabled
- [ 0.000000] ACPI: RSDP 0x00000000EF9F0018 000024 (v02 NXP )
- [ 0.000000] ACPI: XSDT 0x00000000EF9FFE98 00006C (v01 NXP LX2160 00000000 01000013)
- [ 0.000000] ACPI: FACP 0x00000000EF9FFB98 000114 (v06 NXP LX2160 00000000 INTL 20151124)
- [ 0.000000] ACPI: DSDT 0x00000000EF9F0098 004A8C (v02 NXP LX2160 00000000 INTL 20181213)
- [ 0.000000] ACPI: DBG2 0x00000000EF9FFA98 000062 (v00 NXP LX2160 00000000 INTL 20151124)
- [ 0.000000] ACPI: GTDT 0x00000000EF9FE998 000130 (v02 NXP LX2160 00000000 INTL 20151124)
- [ 0.000000] ACPI: APIC 0x00000000EF9FEB18 000568 (v04 NXP LX2160 00000000 INTL 20151124)
- [ 0.000000] ACPI: MCFG 0x00000000EF9FFE18 00004C (v01 NXP LX2160 000000FF INTL 20151124)
- [ 0.000000] ACPI: PPTT 0x00000000EF9F7518 000694 (v01 NXP LX2160 00000000 INTL 20151124)
- [ 0.000000] ACPI: IORT 0x00000000EF9FC798 0010C9 (v01 NXP LX2160 00000000 INTL 20151124)
- [ 0.000000] ACPI: VFCT 0x00000000EEFE0018 00E884 (v01 NXP LX2160 00000001 AMD 31504F47)
- [ 0.000000] ACPI: BGRT 0x00000000EF9FF998 000038 (v01 INTEL EDK2 00000002 01000013)
- [ 0.000000] ACPI: NUMA: Failed to initialise from firmware
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x00000027dfffffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0x27dc1030c0-0x27dc107fff]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000080000000-0x00000000ffffffff]
- [ 0.000000] DMA32 empty
- [ 0.000000] Normal [mem 0x0000000100000000-0x00000027dfffffff]
- [ 0.000000] Device empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000ec42dfff]
- [ 0.000000] node 0: [mem 0x00000000ec42e000-0x00000000ecf2efff]
- [ 0.000000] node 0: [mem 0x00000000ecf2f000-0x00000000edfaffff]
- [ 0.000000] node 0: [mem 0x00000000edfb0000-0x00000000ee02ffff]
- [ 0.000000] node 0: [mem 0x00000000ee030000-0x00000000ee4fffff]
- [ 0.000000] node 0: [mem 0x00000000ee500000-0x00000000ee52ffff]
- [ 0.000000] node 0: [mem 0x00000000ee530000-0x00000000ef47ffff]
- [ 0.000000] node 0: [mem 0x00000000ef480000-0x00000000ef9effff]
- [ 0.000000] node 0: [mem 0x00000000ef9f0000-0x00000000fac9ffff]
- [ 0.000000] node 0: [mem 0x00000000faca0000-0x00000000faceffff]
- [ 0.000000] node 0: [mem 0x00000000facf0000-0x00000000fbdfffff]
- [ 0.000000] node 0: [mem 0x0000002080000000-0x00000027dfffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x00000027dfffffff]
- [ 0.000000] On node 0 totalpages: 8240640
- [ 0.000000] DMA zone: 8192 pages used for memmap
- [ 0.000000] DMA zone: 0 pages reserved
- [ 0.000000] DMA zone: 507392 pages, LIFO batch:63
- [ 0.000000] Normal zone: 120832 pages used for memmap
- [ 0.000000] Normal zone: 7733248 pages, LIFO batch:63
- [ 0.000000] cma: Reserved 32 MiB at 0x00000000f8000000
- [ 0.000000] psci: probing for conduit method from ACPI.
- [ 0.000000] psci: PSCIv1.1 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.2
- [ 0.000000] ACPI: SRAT not present
- [ 0.000000] percpu: Embedded 33 pages/cpu s97176 r8192 d29800 u135168
- [ 0.000000] pcpu-alloc: s97176 r8192 d29800 u135168 alloc=33*4096
- [ 0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06 [0] 07
- [ 0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14 [0] 15
- [ 0.000000] Detected PIPT I-cache on CPU0
- [ 0.000000] CPU features: detected: GIC system register CPU interface
- [ 0.000000] CPU features: detected: Spectre-v3a
- [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
- [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
- [ 0.000000] CPU features: detected: Spectre-v2
- [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 8111616
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.11.0-25-generic root=UUID=674ef912-30fa-4193-821b-0877c3a10faf ro amdgpu.pcie_gen_cap=0x00040004
- [ 0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
- [ 0.000000] software IO TLB: mapped [mem 0x00000000f4000000-0x00000000f8000000] (64MB)
- [ 0.000000] Memory: 32058784K/32962560K available (16064K kernel code, 3572K rwdata, 11884K rodata, 7680K init, 1154K bss, 871008K reserved, 32768K cma-reserved)
- [ 0.000000] random: get_random_u64 called from kmem_cache_open+0x30/0x280 with crng_init=1
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
- [ 0.000000] ftrace: allocating 54590 entries in 214 pages
- [ 0.000000] ftrace: allocated 214 pages with 5 groups
- [ 0.000000] rcu: Hierarchical RCU implementation.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
- [ 0.000000] Rude variant of Tasks RCU enabled.
- [ 0.000000] Tracing variant of Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
- [ 0.000000] GICv3: 256 SPIs implemented
- [ 0.000000] GICv3: 0 Extended SPIs implemented
- [ 0.000000] GICv3: Distributor has no Range Selector support
- [ 0.000000] GICv3: 16 PPIs implemented
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000006200000
- [ 0.000000] ACPI: SRAT not present
- [ 0.000000] ITS [mem 0x06020000-0x0603ffff]
- [ 0.000000] ITS@0x0000000006020000: allocated 65536 Devices @2080200000 (flat, esz 8, psz 64K, shr 0)
- [ 0.000000] ITS: using cache flushing for cmd queue
- [ 0.000000] GICv3: using LPI property table @0x0000002080280000
- [ 0.000000] GIC: using cache flushing for LPI property table
- [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x0000002080290000
- [ 0.000000] ACPI GTDT: found 1 memory-mapped timer block(s).
- [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 25.00MHz (phys/virt).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x5c409fb33, max_idle_ns: 440795203156 ns
- [ 0.000000] sched_clock: 56 bits at 25MHz, resolution 39ns, wraps every 4398046511103ns
- [ 0.000065] Console: colour dummy device 80x25
- [ 0.000321] printk: console [tty0] enabled
- [ 0.000370] ACPI: Core revision 20201113
- [ 0.000775] Calibrating delay loop (skipped), value calculated using timer frequency.. 50.00 BogoMIPS (lpj=100000)
- [ 0.000786] pid_max: default: 32768 minimum: 301
- [ 0.000833] LSM: Security Framework initializing
- [ 0.000848] Yama: becoming mindful.
- [ 0.000903] AppArmor: AppArmor initialized
- [ 0.001046] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
- [ 0.001139] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
- [ 0.002135] rcu: Hierarchical SRCU implementation.
- [ 0.002754] Platform MSI: ITS@0x6020000 domain created
- [ 0.002767] PCI/MSI: ITS@0x6020000 domain created
- [ 0.002777] fsl-mc MSI: ITS@0x6020000 domain created
- [ 0.002795] Remapping and enabling EFI services.
- [ 0.003416] smp: Bringing up secondary CPUs ...
- [ 0.003745] Detected PIPT I-cache on CPU1
- [ 0.003764] GICv3: CPU1: found redistributor 1 region 0:0x0000000006220000
- [ 0.003790] GICv3: CPU1: using allocated LPI pending table @0x00000020802a0000
- [ 0.003815] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
- [ 0.004207] Detected PIPT I-cache on CPU2
- [ 0.004224] GICv3: CPU2: found redistributor 100 region 0:0x0000000006240000
- [ 0.004259] GICv3: CPU2: using allocated LPI pending table @0x00000020802b0000
- [ 0.004284] CPU2: Booted secondary processor 0x0000000100 [0x410fd083]
- [ 0.004661] Detected PIPT I-cache on CPU3
- [ 0.004673] GICv3: CPU3: found redistributor 101 region 0:0x0000000006260000
- [ 0.004699] GICv3: CPU3: using allocated LPI pending table @0x00000020802c0000
- [ 0.004719] CPU3: Booted secondary processor 0x0000000101 [0x410fd083]
- [ 0.005061] Detected PIPT I-cache on CPU4
- [ 0.005078] GICv3: CPU4: found redistributor 200 region 0:0x0000000006280000
- [ 0.005110] GICv3: CPU4: using allocated LPI pending table @0x00000020802d0000
- [ 0.005134] CPU4: Booted secondary processor 0x0000000200 [0x410fd083]
- [ 0.005493] Detected PIPT I-cache on CPU5
- [ 0.005506] GICv3: CPU5: found redistributor 201 region 0:0x00000000062a0000
- [ 0.005533] GICv3: CPU5: using allocated LPI pending table @0x00000020802e0000
- [ 0.005553] CPU5: Booted secondary processor 0x0000000201 [0x410fd083]
- [ 0.005901] Detected PIPT I-cache on CPU6
- [ 0.005919] GICv3: CPU6: found redistributor 300 region 0:0x00000000062c0000
- [ 0.005952] GICv3: CPU6: using allocated LPI pending table @0x00000020802f0000
- [ 0.005976] CPU6: Booted secondary processor 0x0000000300 [0x410fd083]
- [ 0.006322] Detected PIPT I-cache on CPU7
- [ 0.006337] GICv3: CPU7: found redistributor 301 region 0:0x00000000062e0000
- [ 0.006363] GICv3: CPU7: using allocated LPI pending table @0x0000002080300000
- [ 0.006383] CPU7: Booted secondary processor 0x0000000301 [0x410fd083]
- [ 0.006733] Detected PIPT I-cache on CPU8
- [ 0.006753] GICv3: CPU8: found redistributor 400 region 0:0x0000000006300000
- [ 0.006782] GICv3: CPU8: using allocated LPI pending table @0x0000002080310000
- [ 0.006807] CPU8: Booted secondary processor 0x0000000400 [0x410fd083]
- [ 0.007169] Detected PIPT I-cache on CPU9
- [ 0.007185] GICv3: CPU9: found redistributor 401 region 0:0x0000000006320000
- [ 0.007212] GICv3: CPU9: using allocated LPI pending table @0x0000002080320000
- [ 0.007232] CPU9: Booted secondary processor 0x0000000401 [0x410fd083]
- [ 0.007588] Detected PIPT I-cache on CPU10
- [ 0.007610] GICv3: CPU10: found redistributor 500 region 0:0x0000000006340000
- [ 0.007644] GICv3: CPU10: using allocated LPI pending table @0x0000002080330000
- [ 0.007671] CPU10: Booted secondary processor 0x0000000500 [0x410fd083]
- [ 0.008017] Detected PIPT I-cache on CPU11
- [ 0.008035] GICv3: CPU11: found redistributor 501 region 0:0x0000000006360000
- [ 0.008062] GICv3: CPU11: using allocated LPI pending table @0x0000002080340000
- [ 0.008082] CPU11: Booted secondary processor 0x0000000501 [0x410fd083]
- [ 0.008437] Detected PIPT I-cache on CPU12
- [ 0.008461] GICv3: CPU12: found redistributor 600 region 0:0x0000000006380000
- [ 0.008493] GICv3: CPU12: using allocated LPI pending table @0x0000002080350000
- [ 0.008520] CPU12: Booted secondary processor 0x0000000600 [0x410fd083]
- [ 0.008888] Detected PIPT I-cache on CPU13
- [ 0.008907] GICv3: CPU13: found redistributor 601 region 0:0x00000000063a0000
- [ 0.008935] GICv3: CPU13: using allocated LPI pending table @0x0000002080360000
- [ 0.008956] CPU13: Booted secondary processor 0x0000000601 [0x410fd083]
- [ 0.009308] Detected PIPT I-cache on CPU14
- [ 0.009334] GICv3: CPU14: found redistributor 700 region 0:0x00000000063c0000
- [ 0.009366] GICv3: CPU14: using allocated LPI pending table @0x0000002080370000
- [ 0.009393] CPU14: Booted secondary processor 0x0000000700 [0x410fd083]
- [ 0.009755] Detected PIPT I-cache on CPU15
- [ 0.009776] GICv3: CPU15: found redistributor 701 region 0:0x00000000063e0000
- [ 0.009802] GICv3: CPU15: using allocated LPI pending table @0x0000002080380000
- [ 0.009823] CPU15: Booted secondary processor 0x0000000701 [0x410fd083]
- [ 0.009876] smp: Brought up 1 node, 16 CPUs
- [ 0.010031] SMP: Total of 16 processors activated.
- [ 0.010037] CPU features: detected: 32-bit EL0 Support
- [ 0.010042] CPU features: detected: CRC32 instructions
- [ 0.010048] CPU features: detected: 32-bit EL1 Support
- [ 0.010236] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
- [ 0.030844] CPU: All CPU(s) started at EL2
- [ 0.030904] alternatives: patching kernel code
- [ 0.032421] devtmpfs: initialized
- [ 0.033398] Registered cp15_barrier emulation handler
- [ 0.033413] Registered setend emulation handler
- [ 0.033420] KASLR enabled
- [ 0.033505] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.033558] futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
- [ 0.035080] pinctrl core: initialized pinctrl subsystem
- [ 0.035358] SMBIOS 3.2.0 present.
- [ 0.035369] DMI: SolidRun Ltd. SolidRun CEX7 Platform, BIOS EDK II Apr 14 2021
- [ 0.035615] NET: Registered protocol family 16
- [ 0.040191] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
- [ 0.041528] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
- [ 0.043499] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
- [ 0.043534] audit: initializing netlink subsys (disabled)
- [ 0.043648] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
- [ 0.043953] thermal_sys: Registered thermal governor 'fair_share'
- [ 0.043957] thermal_sys: Registered thermal governor 'bang_bang'
- [ 0.043965] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.043970] thermal_sys: Registered thermal governor 'user_space'
- [ 0.043974] thermal_sys: Registered thermal governor 'power_allocator'
- [ 0.044006] cpuidle: using governor ladder
- [ 0.044020] cpuidle: using governor menu
- [ 0.044104] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.044304] ASID allocator initialised with 32768 entries
- [ 0.044458] ACPI: bus type PCI registered
- [ 0.044464] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
- [ 0.044603] Serial: AMBA PL011 UART driver
- [ 0.047623] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
- [ 0.047634] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
- [ 0.047639] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.047644] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
- [ 0.050369] fbcon: Taking over console
- [ 0.050419] ACPI: Added _OSI(Module Device)
- [ 0.050426] ACPI: Added _OSI(Processor Device)
- [ 0.050431] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.050436] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.050441] ACPI: Added _OSI(Linux-Dell-Video)
- [ 0.050446] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
- [ 0.050451] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
- [ 0.054665] ACPI: 1 ACPI AML tables successfully acquired and loaded
- [ 0.057124] ACPI: Interpreter enabled
- [ 0.057131] ACPI: Using GIC for interrupt routing
- [ 0.057153] ACPI: MCFG table detected, 2 entries
- [ 0.064264] ACPI: Power Resource [FN1L] (off)
- [ 0.064343] ACPI: Power Resource [FN1H] (off)
- [ 0.064424] ACPI: Power Resource [FN1F] (on)
- [ 0.065407] ARMH0011:00: ttyAMA0 at MMIO 0x21c0000 (irq = 79, base_baud = 0) is a SBSA
- [ 0.066033] ARMH0011:01: ttyAMA1 at MMIO 0x21d0000 (irq = 80, base_baud = 0) is a SBSA
- [ 0.067223] fsl_mc_bus NXP0008:00: failed to configure dma: -517.
- [ 0.067740] fsl_mc_bus NXP0008:00: MC firmware version: 10.20.4
- [ 0.070311] fsl_mc_dprc dprc.1: DMA mask not set
- [ 0.070542] ACPI: PCI Root Bridge [PCI0] (domain 0002 [bus 01-ff])
- [ 0.070556] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
- [ 0.070754] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
- [ 0.070763] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
- [ 0.070770] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
- [ 0.071044] acpi PNP0A08:00: ECAM area [mem 0x9000100000-0x900fffffff] reserved by PNP0C02:00
- [ 0.073840] acpi PNP0A08:00: ECAM at [mem 0x9000100000-0x900fffffff] for [bus 01-ff]
- [ 0.073882] Remapped I/O 0x0000009010000000 to [io 0x0000-0xffff window]
- [ 0.074047] PCI host bridge to bus 0002:01
- [ 0.074056] pci_bus 0002:01: root bus resource [bus 01-ff]
- [ 0.074063] pci_bus 0002:01: root bus resource [io 0x0000-0xffff window]
- [ 0.074069] pci_bus 0002:01: root bus resource [mem 0x9400000000-0x97ffffffff window]
- [ 0.074076] pci_bus 0002:01: root bus resource [mem 0x9040000000-0x90ffffffff window] (bus address [0x40000000-0xffffffff])
- [ 0.074188] pci 0002:01:00.0: [144d:a80a] type 00 class 0x010802
- [ 0.074211] pci 0002:01:00.0: reg 0x10: [mem 0x9046000000-0x9046003fff 64bit]
- [ 0.074380] pci 0002:01:00.0: 31.504 Gb/s available PCIe bandwidth, limited by 8.0 GT/s PCIe x4 link at 0002:01:00.0 (capable of 63.012 Gb/s with 16.0 GT/s PCIe x4 link)
- [ 0.074486] pci 0002:01:00.0: BAR 0: assigned [mem 0x9400000000-0x9400003fff 64bit]
- [ 0.074501] pci_bus 0002:01: resource 4 [io 0x0000-0xffff window]
- [ 0.074507] pci_bus 0002:01: resource 5 [mem 0x9400000000-0x97ffffffff window]
- [ 0.074513] pci_bus 0002:01: resource 6 [mem 0x9040000000-0x90ffffffff window]
- [ 0.074665] ACPI: PCI Root Bridge [PCI1] (domain 0004 [bus 01-ff])
- [ 0.074676] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
- [ 0.074867] acpi PNP0A08:01: _OSC: OS requested [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
- [ 0.074876] acpi PNP0A08:01: _OSC: platform willing to grant [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
- [ 0.074883] acpi PNP0A08:01: _OSC failed (AE_SUPPORT); disabling ASPM
- [ 0.075159] acpi PNP0A08:01: ECAM area [mem 0xa000100000-0xa00fffffff] reserved by PNP0C02:00
- [ 0.077973] acpi PNP0A08:01: ECAM at [mem 0xa000100000-0xa00fffffff] for [bus 01-ff]
- [ 0.078009] Remapped I/O 0x000000a010000000 to [io 0x10000-0x1ffff window]
- [ 0.078172] PCI host bridge to bus 0004:01
- [ 0.078180] pci_bus 0004:01: root bus resource [bus 01-ff]
- [ 0.078186] pci_bus 0004:01: root bus resource [io 0x10000-0x1ffff window] (bus address [0x0000-0xffff])
- [ 0.078193] pci_bus 0004:01: root bus resource [mem 0xa400000000-0xa7ffffffff window]
- [ 0.078200] pci_bus 0004:01: root bus resource [mem 0xa040000000-0xa0ffffffff window] (bus address [0x40000000-0xffffffff])
- [ 0.078309] pci 0004:01:00.0: [1002:67e3] type 00 class 0x030000
- [ 0.078331] pci 0004:01:00.0: reg 0x10: [mem 0xa400000000-0xa40fffffff 64bit pref]
- [ 0.078347] pci 0004:01:00.0: reg 0x18: [mem 0xa410000000-0xa4101fffff 64bit pref]
- [ 0.078359] pci 0004:01:00.0: reg 0x20: [io 0x10000-0x100ff]
- [ 0.078371] pci 0004:01:00.0: reg 0x24: [mem 0xa046000000-0xa04603ffff]
- [ 0.078382] pci 0004:01:00.0: reg 0x30: [mem 0xa0fffe0000-0xa0ffffffff pref]
- [ 0.078392] pci 0004:01:00.0: enabling Extended Tags
- [ 0.078417] pci 0004:01:00.0: BAR 0: assigned to efifb
- [ 0.078484] pci 0004:01:00.0: supports D1 D2
- [ 0.078489] pci 0004:01:00.0: PME# supported from D1 D2 D3hot D3cold
- [ 0.078637] pci 0004:01:00.1: [1002:aae0] type 00 class 0x040300
- [ 0.078657] pci 0004:01:00.1: reg 0x10: [mem 0xa046040000-0xa046043fff 64bit]
- [ 0.078687] pci 0004:01:00.1: enabling Extended Tags
- [ 0.078742] pci 0004:01:00.1: supports D1 D2
- [ 0.078866] pci 0004:01:00.0: BAR 0: assigned [mem 0xa400000000-0xa40fffffff 64bit pref]
- [ 0.078881] pci 0004:01:00.0: BAR 2: assigned [mem 0xa410000000-0xa4101fffff 64bit pref]
- [ 0.078894] pci 0004:01:00.0: BAR 5: assigned [mem 0xa040000000-0xa04003ffff]
- [ 0.078902] pci 0004:01:00.0: BAR 6: assigned [mem 0xa040040000-0xa04005ffff pref]
- [ 0.078909] pci 0004:01:00.1: BAR 0: assigned [mem 0xa410200000-0xa410203fff 64bit]
- [ 0.078922] pci 0004:01:00.0: BAR 4: assigned [io 0x10000-0x100ff]
- [ 0.078930] pci_bus 0004:01: resource 4 [io 0x10000-0x1ffff window]
- [ 0.078936] pci_bus 0004:01: resource 5 [mem 0xa400000000-0xa7ffffffff window]
- [ 0.078942] pci_bus 0004:01: resource 6 [mem 0xa040000000-0xa0ffffffff window]
- [ 0.082123] iommu: Default domain type: Translated
- [ 0.082531] SCSI subsystem initialized
- [ 0.082607] libata version 3.00 loaded.
- [ 0.082657] pci 0004:01:00.0: vgaarb: VGA device added: decodes=io+mem,owns=mem,locks=none
- [ 0.082668] pci 0004:01:00.0: vgaarb: bridge control possible
- [ 0.082674] pci 0004:01:00.0: vgaarb: setting as boot device (VGA legacy resources not available)
- [ 0.082680] vgaarb: loaded
- [ 0.082717] ACPI: bus type USB registered
- [ 0.082744] usbcore: registered new interface driver usbfs
- [ 0.082760] usbcore: registered new interface driver hub
- [ 0.082780] usbcore: registered new device driver usb
- [ 0.082850] pps_core: LinuxPPS API ver. 1 registered
- [ 0.082855] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.082864] PTP clock support registered
- [ 0.082964] EDAC MC: Ver: 3.0.0
- [ 0.083179] Registered efivars operations
- [ 0.083869] NetLabel: Initializing
- [ 0.083877] NetLabel: domain hash size = 128
- [ 0.083881] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
- [ 0.083917] NetLabel: unlabeled traffic allowed by default
- [ 0.084160] clocksource: Switched to clocksource arch_sys_counter
- [ 0.104857] VFS: Disk quotas dquot_6.6.0
- [ 0.104902] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.105177] AppArmor: AppArmor Filesystem Enabled
- [ 0.105268] pnp: PnP ACPI init
- [ 0.105571] system 00:00: [mem 0x03600000-0x036fffff] has been reserved
- [ 0.105589] system 00:00: Plug and Play ACPI device, IDs NXP0016 PNP0c02 (active)
- [ 0.105645] system 00:01: [mem 0x03800000-0x038fffff] has been reserved
- [ 0.105659] system 00:01: Plug and Play ACPI device, IDs NXP0016 PNP0c02 (active)
- [ 0.105712] system 00:02: [mem 0x9000000000-0x900fffffff] could not be reserved
- [ 0.105721] system 00:02: [mem 0xa000000000-0xa00fffffff] could not be reserved
- [ 0.105733] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
- [ 0.105826] pnp: PnP ACPI: found 3 devices
- [ 0.109048] NET: Registered protocol family 2
- [ 0.109431] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
- [ 0.113150] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
- [ 0.113678] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
- [ 0.114649] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, linear)
- [ 0.115054] TCP: Hash tables configured (established 262144 bind 65536)
- [ 0.115356] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
- [ 0.115587] UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
- [ 0.115979] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
- [ 0.116639] NET: Registered protocol family 1
- [ 0.116657] NET: Registered protocol family 44
- [ 0.116734] pci 0004:01:00.1: D0 power state depends on 0004:01:00.0
- [ 0.116748] PCI: CLS 0 bytes, default 64
- [ 0.116891] Trying to unpack rootfs image as initramfs...
- [ 0.756862] Freeing initrd memory: 106240K
- [ 0.757773] hw perfevents: enabled with armv8_pmuv3_0 PMU driver, 7 counters available
- [ 0.757819] kvm [1]: IPA Size Limit: 44 bits
- [ 0.758586] kvm [1]: vgic-v2@c0e0000
- [ 0.758608] kvm [1]: GIC system register CPU interface enabled
- [ 0.758848] kvm [1]: vgic interrupt IRQ9
- [ 0.759075] kvm [1]: Hyp mode initialized successfully
- [ 0.759946] Initialise system trusted keyrings
- [ 0.759972] Key type blacklist registered
- [ 0.760097] workingset: timestamp_bits=40 max_order=23 bucket_order=0
- [ 0.762016] zbud: loaded
- [ 0.762589] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.762861] fuse: init (API version 7.33)
- [ 0.763094] integrity: Platform Keyring initialized
- [ 0.782759] Key type asymmetric registered
- [ 0.782766] Asymmetric key parser 'x509' registered
- [ 0.782784] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
- [ 0.782860] io scheduler mq-deadline registered
- [ 0.784278] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
- [ 0.784795] efifb: probing for efifb
- [ 0.784833] efifb: framebuffer at 0xa400000000, using 19440k, total 19440k
- [ 0.784839] efifb: mode is 3440x1440x32, linelength=13824, pages=1
- [ 0.784845] efifb: scrolling: redraw
- [ 0.784848] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
- [ 0.785028] Console: switching to colour frame buffer device 215x45
- [ 0.803089] fb0: EFI VGA frame buffer device
- [ 0.803667] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
- [ 0.803892] ACPI: Power Button [PWRB]
- [ 0.806195] thermal LNXTHERM:00: registered as thermal_zone0
- [ 0.806327] ACPI: Thermal Zone [THM0] (2147483721 C)
- [ 0.806776] thermal LNXTHERM:01: registered as thermal_zone1
- [ 0.806905] ACPI: Thermal Zone [THM1] (2147483723 C)
- [ 0.807156] ACPI: Invalid passive threshold
- [ 0.807564] thermal LNXTHERM:02: registered as thermal_zone2
- [ 0.807693] ACPI: Thermal Zone [THM2] (2147483716 C)
- [ 0.807951] ACPI: Invalid passive threshold
- [ 0.808378] thermal LNXTHERM:03: registered as thermal_zone3
- [ 0.808507] ACPI: Thermal Zone [THM3] (2147483721 C)
- [ 0.808771] ACPI: Invalid passive threshold
- [ 0.809190] thermal LNXTHERM:04: registered as thermal_zone4
- [ 0.809318] ACPI: Thermal Zone [THM4] (2147483720 C)
- [ 0.809928] thermal LNXTHERM:05: registered as thermal_zone5
- [ 0.810057] ACPI: Thermal Zone [THM5] (2147483720 C)
- [ 0.810691] thermal LNXTHERM:06: registered as thermal_zone6
- [ 0.810820] ACPI: Thermal Zone [THM6] (2147483722 C)
- [ 0.815609] thermal LNXTHERM:07: registered as thermal_zone7
- [ 0.820078] ACPI: Thermal Zone [THM7] (0 C)
- [ 0.824842] thermal LNXTHERM:08: registered as thermal_zone8
- [ 0.829322] ACPI: Thermal Zone [THM8] (0 C)
- [ 0.834028] ACPI GTDT: found 1 SBSA generic Watchdog(s).
- [ 0.840703] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
- [ 0.848433] msm_serial: driver initialized
- [ 0.853429] arm-smmu arm-smmu.0.auto: probing hardware configuration...
- [ 0.858041] arm-smmu arm-smmu.0.auto: SMMUv2 with:
- [ 0.862564] arm-smmu arm-smmu.0.auto: stage 1 translation
- [ 0.867048] arm-smmu arm-smmu.0.auto: stage 2 translation
- [ 0.871446] arm-smmu arm-smmu.0.auto: nested translation
- [ 0.875807] arm-smmu arm-smmu.0.auto: coherent table walk
- [ 0.880135] arm-smmu arm-smmu.0.auto: (IDR0.CTTW overridden by FW configuration)
- [ 0.884566] arm-smmu arm-smmu.0.auto: stream matching with 128 register groups
- [ 0.888908] arm-smmu arm-smmu.0.auto: 64 context banks (0 stage-2 only)
- [ 0.893184] arm-smmu arm-smmu.0.auto: Supported page sizes: 0x61311000
- [ 0.897437] arm-smmu arm-smmu.0.auto: Stage-1: 48-bit VA -> 48-bit IPA
- [ 0.901639] arm-smmu arm-smmu.0.auto: Stage-2: 48-bit IPA -> 48-bit PA
- [ 0.912528] loop: module loaded
- [ 0.917463] libphy: Fixed MDIO Bus: probed
- [ 0.921545] tun: Universal TUN/TAP device driver, 1.6
- [ 0.936913] at803x: module verification failed: signature and/or required key missing - tainting kernel
- [ 1.151859] libphy: Freescale XGMAC MDIO Bus: probed
- [ 1.359936] libphy: Freescale XGMAC MDIO Bus: probed
- [ 1.364228] PPP generic driver version 2.4.2
- [ 1.368387] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.372454] ehci-pci: EHCI PCI platform driver
- [ 1.376491] ehci-orion: EHCI orion driver
- [ 1.380480] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.384505] ohci-pci: OHCI PCI platform driver
- [ 1.388499] uhci_hcd: USB Universal Host Controller Interface driver
- [ 1.392744] mousedev: PS/2 mouse device common for all mice
- [ 1.401436] rtc-efi rtc-efi.0: registered as rtc0
- [ 1.407702] rtc-efi rtc-efi.0: setting system clock to 2021-08-09T01:33:53 UTC (1628472833)
- [ 1.411960] i2c /dev entries driver
- [ 1.416433] device-mapper: uevent: version 1.0.3
- [ 1.420667] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com
- [ 1.425742] ledtrig-cpu: registered to indicate activity on CPUs
- [ 1.430117] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping ....
- [ 1.434857] drop_monitor: Initializing network drop monitor service
- [ 1.439428] NET: Registered protocol family 10
- [ 1.455079] Segment Routing with IPv6
- [ 1.459355] NET: Registered protocol family 17
- [ 1.463674] Key type dns_resolver registered
- [ 1.468057] registered taskstats version 1
- [ 1.472235] Loading compiled-in X.509 certificates
- [ 1.477498] Loaded X.509 cert 'Build time autogenerated kernel key: 1348f2e2584f1fe926c9672456780b54c9939f6c'
- [ 1.482747] Loaded X.509 cert 'Canonical Ltd. Live Patch Signing: 14df34d1a87cf37625abec039ef2bf521249b969'
- [ 1.488064] Loaded X.509 cert 'Canonical Ltd. Kernel Module Signing: 88f752e560a1e0737e31163a466ad7b70a850c19'
- [ 1.493523] zswap: loaded using pool lzo/zbud
- [ 1.498194] Key type ._fscrypt registered
- [ 1.502542] Key type .fscrypt registered
- [ 1.506869] Key type fscrypt-provisioning registered
- [ 1.517172] cryptd: max_cpu_qlen set to 1000
- [ 1.535580] Key type encrypted registered
- [ 1.540033] AppArmor: AppArmor sha1 policy hashing enabled
- [ 1.544828] ima: No TPM chip found, activating TPM-bypass!
- [ 1.549412] ima: Allocated hash algorithm: sha1
- [ 1.553974] ima: No architecture policies found
- [ 1.558533] evm: Initialising EVM extended attributes:
- [ 1.563095] evm: security.selinux
- [ 1.567576] evm: security.SMACK64
- [ 1.572038] evm: security.SMACK64EXEC
- [ 1.576415] evm: security.SMACK64TRANSMUTE
- [ 1.580768] evm: security.SMACK64MMAP
- [ 1.585053] evm: security.apparmor
- [ 1.589194] evm: security.ima
- [ 1.593181] evm: security.capability
- [ 1.597196] evm: HMAC attrs: 0x1
- [ 1.601620] fsl_mc_dprc dprc.1: Adding to iommu group 0
- [ 1.649884] fsl_mc_allocator dpbp.0: Adding to iommu group 0
- [ 1.654964] fsl_mc_allocator dpmcp.35: Adding to iommu group 0
- [ 1.659521] fsl_mc_allocator dpmcp.34: Adding to iommu group 0
- [ 1.663984] fsl_mc_allocator dpmcp.33: Adding to iommu group 0
- [ 1.668371] fsl_mc_allocator dpmcp.32: Adding to iommu group 0
- [ 1.672674] fsl_mc_allocator dpmcp.31: Adding to iommu group 0
- [ 1.676873] fsl_mc_allocator dpmcp.30: Adding to iommu group 0
- [ 1.680989] fsl_mc_allocator dpmcp.29: Adding to iommu group 0
- [ 1.685007] fsl_mc_allocator dpmcp.28: Adding to iommu group 0
- [ 1.688888] fsl_mc_allocator dpmcp.27: Adding to iommu group 0
- [ 1.692700] fsl_mc_allocator dpmcp.26: Adding to iommu group 0
- [ 1.696399] fsl_mc_allocator dpmcp.25: Adding to iommu group 0
- [ 1.699953] fsl_mc_allocator dpmcp.24: Adding to iommu group 0
- [ 1.703411] fsl_mc_allocator dpmcp.23: Adding to iommu group 0
- [ 1.706776] fsl_mc_allocator dpmcp.22: Adding to iommu group 0
- [ 1.710050] fsl_mc_allocator dpmcp.21: Adding to iommu group 0
- [ 1.713270] fsl_mc_allocator dpmcp.20: Adding to iommu group 0
- [ 1.716425] fsl_mc_allocator dpmcp.19: Adding to iommu group 0
- [ 1.719513] fsl_mc_allocator dpmcp.18: Adding to iommu group 0
- [ 1.722555] fsl_mc_allocator dpmcp.17: Adding to iommu group 0
- [ 1.725525] fsl_mc_allocator dpmcp.16: Adding to iommu group 0
- [ 1.728335] fsl_mc_allocator dpmcp.15: Adding to iommu group 0
- [ 1.730992] fsl_mc_allocator dpmcp.14: Adding to iommu group 0
- [ 1.733541] fsl_mc_allocator dpmcp.13: Adding to iommu group 0
- [ 1.735913] fsl_mc_allocator dpmcp.12: Adding to iommu group 0
- [ 1.738234] fsl_mc_allocator dpmcp.11: Adding to iommu group 0
- [ 1.740517] fsl_mc_allocator dpmcp.10: Adding to iommu group 0
- [ 1.742745] fsl_mc_allocator dpmcp.9: Adding to iommu group 0
- [ 1.744955] fsl_mc_allocator dpmcp.8: Adding to iommu group 0
- [ 1.747098] fsl_mc_allocator dpmcp.7: Adding to iommu group 0
- [ 1.749166] fsl_mc_allocator dpmcp.6: Adding to iommu group 0
- [ 1.751147] fsl_mc_allocator dpmcp.5: Adding to iommu group 0
- [ 1.753065] fsl_mc_allocator dpmcp.4: Adding to iommu group 0
- [ 1.754921] fsl_mc_allocator dpmcp.3: Adding to iommu group 0
- [ 1.756712] fsl_mc_allocator dpmcp.2: Adding to iommu group 0
- [ 1.758438] fsl_mc_allocator dpmcp.1: Adding to iommu group 0
- [ 1.759647] fsl_mc_allocator dpcon.15: Adding to iommu group 0
- [ 1.760910] fsl_mc_allocator dpcon.14: Adding to iommu group 0
- [ 1.762150] fsl_mc_allocator dpcon.13: Adding to iommu group 0
- [ 1.763373] fsl_mc_allocator dpcon.12: Adding to iommu group 0
- [ 1.764581] fsl_mc_allocator dpcon.11: Adding to iommu group 0
- [ 1.765772] fsl_mc_allocator dpcon.10: Adding to iommu group 0
- [ 1.766945] fsl_mc_allocator dpcon.9: Adding to iommu group 0
- [ 1.768130] fsl_mc_allocator dpcon.8: Adding to iommu group 0
- [ 1.769247] fsl_mc_allocator dpcon.7: Adding to iommu group 0
- [ 1.770282] fsl_mc_allocator dpcon.6: Adding to iommu group 0
- [ 1.771268] fsl_mc_allocator dpcon.5: Adding to iommu group 0
- [ 1.772255] fsl_mc_allocator dpcon.4: Adding to iommu group 0
- [ 1.773235] fsl_mc_allocator dpcon.3: Adding to iommu group 0
- [ 1.774210] fsl_mc_allocator dpcon.2: Adding to iommu group 0
- [ 1.775188] fsl_mc_allocator dpcon.1: Adding to iommu group 0
- [ 1.776166] fsl_mc_allocator dpcon.0: Adding to iommu group 0
- [ 1.805093] fsl_mc_dprc dprc.1: DPRC device bound to driver
- [ 1.810423] Freeing unused kernel memory: 7680K
- [ 1.961996] Checked W+X mappings: passed, no W+X pages found
- [ 1.963184] Run /init as init process
- [ 1.964391] with arguments:
- [ 1.964394] /init
- [ 1.964397] with environment:
- [ 1.964399] HOME=/
- [ 1.964401] TERM=linux
- [ 1.964403] BOOT_IMAGE=/boot/vmlinuz-5.11.0-25-generic
- [ 2.198032] xhci-hcd 808622B7:00: Adding to iommu group 1
- [ 2.201026] xhci-hcd 808622B7:00: xHCI Host Controller
- [ 2.203959] xhci-hcd 808622B7:00: new USB bus registered, assigned bus number 1
- [ 2.204413] ahci NXP0004:00: Adding to iommu group 2
- [ 2.207928] xhci-hcd 808622B7:00: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000000010010
- [ 2.208976] i2c i2c-0: IMX I2C adapter registered
- [ 2.209403] i2c i2c-1: IMX I2C adapter registered
- [ 2.212282] ahci NXP0004:00: supply ahci not found, using dummy regulator
- [ 2.212682] ftm-alarm NXP0014:00: registered as rtc1
- [ 2.217274] xhci-hcd 808622B7:00: irq 99, io mem 0x03100000
- [ 2.220350] ahci NXP0004:00: supply phy not found, using dummy regulator
- [ 2.222390] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
- [ 2.224571] ahci NXP0004:00: supply target not found, using dummy regulator
- [ 2.229503] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.229528] nvme 0002:01:00.0: Adding to iommu group 3
- [ 2.229961] nvme nvme0: pci function 0002:01:00.0
- [ 2.235443] ahci NXP0004:00: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode
- [ 2.239744] usb usb1: Product: xHCI Host Controller
- [ 2.244819] nvme nvme0: Shutdown timeout set to 10 seconds
- [ 2.249567] ahci NXP0004:00: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
- [ 2.250167] nvme nvme0: 16/0/0 default/read/poll queues
- [ 2.253209] nvme0n1: p1 p2 p3
- [ 2.254035] usb usb1: Manufacturer: Linux 5.11.0-25-generic xhci-hcd
- [ 2.258686] fsl_mc_dpio dpio.15: Adding to iommu group 0
- [ 2.258697] scsi host0: ahci
- [ 2.258895] ata1: SATA max UDMA/133 mmio [mem 0x03200000-0x0320ffff] port 0x100 irq 86
- [ 2.259030] ahci NXP0004:01: Adding to iommu group 4
- [ 2.259291] ahci NXP0004:01: supply ahci not found, using dummy regulator
- [ 2.259348] ahci NXP0004:01: supply phy not found, using dummy regulator
- [ 2.259371] ahci NXP0004:01: supply target not found, using dummy regulator
- [ 2.259422] ahci NXP0004:01: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode
- [ 2.259428] ahci NXP0004:01: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
- [ 2.259813] scsi host1: ahci
- [ 2.259921] ata2: SATA max UDMA/133 mmio [mem 0x03210000-0x0321ffff] port 0x100 irq 89
- [ 2.260043] ahci NXP0004:02: Adding to iommu group 5
- [ 2.260293] ahci NXP0004:02: supply ahci not found, using dummy regulator
- [ 2.260352] ahci NXP0004:02: supply phy not found, using dummy regulator
- [ 2.260380] ahci NXP0004:02: supply target not found, using dummy regulator
- [ 2.260425] ahci NXP0004:02: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode
- [ 2.260430] ahci NXP0004:02: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
- [ 2.260848] scsi host2: ahci
- [ 2.260954] ata3: SATA max UDMA/133 mmio [mem 0x03220000-0x0322ffff] port 0x100 irq 92
- [ 2.261076] ahci NXP0004:03: Adding to iommu group 6
- [ 2.261305] ahci NXP0004:03: supply ahci not found, using dummy regulator
- [ 2.261352] ahci NXP0004:03: supply phy not found, using dummy regulator
- [ 2.261371] ahci NXP0004:03: supply target not found, using dummy regulator
- [ 2.261419] ahci NXP0004:03: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl platform mode
- [ 2.261424] ahci NXP0004:03: flags: 64bit ncq sntf pm clo only pmp fbs pio slum part ccc sds apst
- [ 2.261818] scsi host3: ahci
- [ 2.261926] ata4: SATA max UDMA/133 mmio [mem 0x03230000-0x0323ffff] port 0x100 irq 95
- [ 2.262291] usb usb1: SerialNumber: 808622B7:00
- [ 2.262573] hub 1-0:1.0: USB hub found
- [ 2.268024] fsl_mc_dpio dpio.15: unknown SoC version
- [ 2.268540] hub 1-0:1.0: 1 port detected
- [ 2.274488] fsl_mc_dpio dpio.15: probed
- [ 2.276994] xhci-hcd 808622B7:00: xHCI Host Controller
- [ 2.281862] fsl_mc_dpio dpio.14: Adding to iommu group 0
- [ 2.287158] xhci-hcd 808622B7:00: new USB bus registered, assigned bus number 2
- [ 2.287169] xhci-hcd 808622B7:00: Host supports USB 3.0 SuperSpeed
- [ 2.293726] fsl_mc_dpio dpio.14: unknown SoC version
- [ 2.297546] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 2.301815] fsl_mc_dpio dpio.14: probed
- [ 2.307144] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11
- [ 2.312034] fsl_mc_dpio dpio.13: Adding to iommu group 0
- [ 2.315041] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.321703] fsl_mc_dpio dpio.13: unknown SoC version
- [ 2.323234] usb usb2: Product: xHCI Host Controller
- [ 2.328134] fsl_mc_dpio dpio.13: probed
- [ 2.331870] usb usb2: Manufacturer: Linux 5.11.0-25-generic xhci-hcd
- [ 2.336917] fsl_mc_dpio dpio.12: Adding to iommu group 0
- [ 2.340743] usb usb2: SerialNumber: 808622B7:00
- [ 2.341027] hub 2-0:1.0: USB hub found
- [ 2.348048] fsl_mc_dpio dpio.12: unknown SoC version
- [ 2.350170] hub 2-0:1.0: 1 port detected
- [ 2.355565] fsl_mc_dpio dpio.12: probed
- [ 2.360184] xhci-hcd 808622B7:01: Adding to iommu group 7
- [ 2.365495] fsl_mc_dpio dpio.11: Adding to iommu group 0
- [ 2.370219] xhci-hcd 808622B7:01: xHCI Host Controller
- [ 2.377699] fsl_mc_dpio dpio.11: unknown SoC version
- [ 2.380330] xhci-hcd 808622B7:01: new USB bus registered, assigned bus number 3
- [ 2.386939] fsl_mc_dpio dpio.11: probed
- [ 2.391681] xhci-hcd 808622B7:01: hcc params 0x0220f66d hci version 0x100 quirks 0x0000000000010010
- [ 2.398617] fsl_mc_dpio dpio.10: Adding to iommu group 0
- [ 2.403176] xhci-hcd 808622B7:01: irq 100, io mem 0x03110000
- [ 2.411762] fsl_mc_dpio dpio.10: unknown SoC version
- [ 2.414540] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.11
- [ 2.421257] fsl_mc_dpio dpio.10: probed
- [ 2.425813] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.425817] usb usb3: Product: xHCI Host Controller
- [ 2.425820] usb usb3: Manufacturer: Linux 5.11.0-25-generic xhci-hcd
- [ 2.425822] usb usb3: SerialNumber: 808622B7:01
- [ 2.431754] fsl_mc_dpio dpio.9: Adding to iommu group 0
- [ 2.436596] hub 3-0:1.0: USB hub found
- [ 2.444192] fsl_mc_dpio dpio.9: unknown SoC version
- [ 2.446836] hub 3-0:1.0: 1 port detected
- [ 2.452617] fsl_mc_dpio dpio.9: probed
- [ 2.457338] xhci-hcd 808622B7:01: xHCI Host Controller
- [ 2.462935] fsl_mc_dpio dpio.8: Adding to iommu group 0
- [ 2.467331] xhci-hcd 808622B7:01: new USB bus registered, assigned bus number 4
- [ 2.467337] xhci-hcd 808622B7:01: Host supports USB 3.0 SuperSpeed
- [ 2.475106] fsl_mc_dpio dpio.8: unknown SoC version
- [ 2.477544] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 2.483179] fsl_mc_dpio dpio.8: probed
- [ 2.487721] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.11
- [ 2.493529] fsl_mc_dpio dpio.7: Adding to iommu group 0
- [ 2.498544] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.498547] usb usb4: Product: xHCI Host Controller
- [ 2.498550] usb usb4: Manufacturer: Linux 5.11.0-25-generic xhci-hcd
- [ 2.498553] usb usb4: SerialNumber: 808622B7:01
- [ 2.520191] fsl_mc_dpio dpio.7: unknown SoC version
- [ 2.534508] hub 4-0:1.0: USB hub found
- [ 2.539069] [drm] amdgpu kernel modesetting enabled.
- [ 2.539207] CRAT table disabled by module option
- [ 2.539214] IO link not available for non x86 platforms
- [ 2.539215] Virtual CRAT table created for CPU
- [ 2.539240] amdgpu: Topology: Add CPU node
- [ 2.539417] amdgpu 0004:01:00.0: Adding to iommu group 8
- [ 2.539660] checking generic (a400000000 12fc000) vs hw (a400000000 10000000)
- [ 2.540032] fsl_mc_dpio dpio.7: probed
- [ 2.540267] fsl_mc_dpio dpio.6: Adding to iommu group 0
- [ 2.542881] fsl_mc_dpio dpio.6: unknown SoC version
- [ 2.543425] fsl_mc_dpio dpio.6: probed
- [ 2.544004] fsl_mc_dpio dpio.5: Adding to iommu group 0
- [ 2.545026] hub 4-0:1.0: 1 port detected
- [ 2.546746] fsl_mc_dpio dpio.5: unknown SoC version
- [ 2.550111] fb0: switching to amdgpudrmfb from EFI VGA
- [ 2.555780] fsl_mc_dpio dpio.5: probed
- [ 2.570572] ata2: SATA link down (SStatus 0 SControl 300)
- [ 2.571774] fsl_mc_dpio dpio.4: Adding to iommu group 0
- [ 2.574592] ata4: SATA link down (SStatus 0 SControl 300)
- [ 2.612186] usb 1-1: new high-speed USB device number 2 using xhci-hcd
- [ 2.618913] fsl_mc_dpio dpio.4: unknown SoC version
- [ 2.736179] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 2.736186] ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
- [ 2.736341] ata3.00: ATA-10: SSDSCKKB240G8R, XC31DL6P, max UDMA/133
- [ 2.736346] ata3.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32)
- [ 2.736571] ata3.00: configured for UDMA/133
- [ 2.739762] fsl_mc_dpio dpio.4: probed
- [ 2.744282] ata1.00: ATA-10: SSDSCKKB240G8R, XC31DL6P, max UDMA/133
- [ 2.750664] fsl_mc_dpio dpio.3: Adding to iommu group 0
- [ 2.754852] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 32)
- [ 2.755024] ata1.00: configured for UDMA/133
- [ 2.762796] fsl_mc_dpio dpio.3: unknown SoC version
- [ 2.765117] scsi 0:0:0:0: Direct-Access ATA SSDSCKKB240G8R DL6P PQ: 0 ANSI: 5
- [ 2.770233] fsl_mc_dpio dpio.3: probed
- [ 2.774789] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 2.774905] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
- [ 2.774911] sd 0:0:0:0: [sda] 4096-byte physical blocks
- [ 2.774933] sd 0:0:0:0: [sda] Write Protect is off
- [ 2.774938] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 2.774970] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.779825] fsl_mc_dpio dpio.2: Adding to iommu group 0
- [ 2.784209] scsi 2:0:0:0: Direct-Access ATA SSDSCKKB240G8R DL6P PQ: 0 ANSI: 5
- [ 2.789139] usb 1-1: New USB device found, idVendor=0b95, idProduct=1790, bcdDevice= 1.00
- [ 2.791258] fsl_mc_dpio dpio.2: unknown SoC version
- [ 2.791804] fsl_mc_dpio dpio.2: probed
- [ 2.792234] fsl_mc_dpio dpio.1: Adding to iommu group 0
- [ 2.793728] sd 2:0:0:0: Attached scsi generic sg1 type 0
- [ 2.793824] sd 2:0:0:0: [sdb] 468862128 512-byte logical blocks: (240 GB/224 GiB)
- [ 2.793830] sd 2:0:0:0: [sdb] 4096-byte physical blocks
- [ 2.793851] sd 2:0:0:0: [sdb] Write Protect is off
- [ 2.793855] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
- [ 2.793887] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 2.794848] fsl_mc_dpio dpio.1: unknown SoC version
- [ 2.795393] fsl_mc_dpio dpio.1: probed
- [ 2.795968] fsl_mc_dpio dpio.0: Adding to iommu group 0
- [ 2.798020] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 2.798255] fsl_mc_dpio dpio.0: unknown SoC version
- [ 2.798794] fsl_mc_dpio dpio.0: probed
- [ 2.802170] sda: sda1 sda2
- [ 2.803030] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 3.024578] usb 1-1: Product: AX88179
- [ 3.024584] usb 1-1: Manufacturer: ASIX Elec. Corp.
- [ 3.024587] usb 1-1: SerialNumber: 0000249B1E62AE
- [ 3.024603] usb 3-1: new high-speed USB device number 2 using xhci-hcd
- [ 3.024627] Console: switching to colour dummy device 80x25
- [ 3.024848] amdgpu 0004:01:00.0: enabling device (0006 -> 0007)
- [ 3.024863] [drm] initializing kernel modesetting (POLARIS11 0x1002:0x67E3 0x1002:0x0B0D 0x00).
- [ 3.024873] amdgpu 0004:01:00.0: amdgpu: Trusted Memory Zone (TMZ) feature not supported
- [ 3.024892] [drm] register mmio base: 0x40000000
- [ 3.024897] [drm] register mmio size: 262144
- [ 3.024907] [drm] add ip block number 0 <vi_common>
- [ 3.024912] [drm] add ip block number 1 <gmc_v8_0>
- [ 3.024916] [drm] add ip block number 2 <tonga_ih>
- [ 3.024921] [drm] add ip block number 3 <gfx_v8_0>
- [ 3.024925] [drm] add ip block number 4 <sdma_v3_0>
- [ 3.024929] [drm] add ip block number 5 <powerplay>
- [ 3.024934] [drm] add ip block number 6 <dm>
- [ 3.024938] [drm] add ip block number 7 <uvd_v6_0>
- [ 3.024943] [drm] add ip block number 8 <vce_v3_0>
- [ 3.024980] amdgpu 0004:01:00.0: amdgpu: Fetched VBIOS from VFCT
- [ 3.024987] amdgpu: ATOM BIOS: 113-D0150600-103
- [ 3.025017] [drm] UVD is enabled in VM mode
- [ 3.025022] [drm] UVD ENC is enabled in VM mode
- [ 3.025028] [drm] VCE enabled in VM mode
- [ 3.025089] [drm] vm size is 128 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
- [ 3.025185] amdgpu 0004:01:00.0: BAR 2: releasing [mem 0xa410000000-0xa4101fffff 64bit pref]
- [ 3.025197] amdgpu 0004:01:00.0: BAR 0: releasing [mem 0xa400000000-0xa40fffffff 64bit pref]
- [ 3.025227] amdgpu 0004:01:00.0: BAR 0: assigned [mem 0xa500000000-0xa5ffffffff 64bit pref]
- [ 3.025241] amdgpu 0004:01:00.0: BAR 2: assigned [mem 0xa400000000-0xa4001fffff 64bit pref]
- [ 3.025258] amdgpu 0004:01:00.0: amdgpu: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
- [ 3.025267] amdgpu 0004:01:00.0: amdgpu: GART: 256M 0x000000FF00000000 - 0x000000FF0FFFFFFF
- [ 3.025276] [drm] Detected VRAM RAM=4096M, BAR=4096M
- [ 3.025281] [drm] RAM width 128bits GDDR5
- [ 3.025398] [TTM] Zone kernel: Available graphics memory: 16102736 KiB
- [ 3.025405] [TTM] Zone dma32: Available graphics memory: 2097152 KiB
- [ 3.025476] [drm] amdgpu: 4096M of VRAM memory ready
- [ 3.025485] [drm] amdgpu: 4096M of GTT memory ready.
- [ 3.025500] [drm] GART: num cpu pages 65536, num gpu pages 65536
- [ 3.027497] [drm] PCIE GART of 256M enabled (table at 0x000000F4012E6000).
- [ 3.027757] [drm] Chained IB support enabled!
- [ 3.030505] amdgpu: hwmgr_sw_init smu backed is polaris10_smu
- [ 3.030738] [drm] Found UVD firmware Version: 1.130 Family ID: 16
- [ 3.033009] [drm] Found VCE firmware Version: 53.26 Binary ID: 3
- [ 3.041831] GPT:disk_guids don't match.
- [ 3.041844] GPT:partition_entry_array_crc32 values don't match: 0xad334ef5 != 0xab54d286
- [ 3.041851] GPT: Use GNU Parted to correct GPT errors.
- [ 3.041865] sdb: sdb1 sdb2 sdb3
- [ 3.042803] sd 2:0:0:0: [sdb] Attached SCSI disk
- [ 3.045377] fsl_dpaa2_eth dpni.0: Adding to iommu group 0
- [ 3.126557] [drm] Display Core initialized with v3.2.116!
- [ 3.176429] usb 3-1: New USB device found, idVendor=04b4, idProduct=6502, bcdDevice=50.10
- [ 3.176446] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 3.196975] fsl_dpaa2_eth dpni.0 (unnamed net_device) (uninitialized): No dpmac@17 node found.
- [ 3.197491] fsl_dpaa2_eth dpni.0 (unnamed net_device) (uninitialized): Error connecting to the MAC endpoint
- [ 3.213594] hub 3-1:1.0: USB hub found
- [ 3.213643] hub 3-1:1.0: 4 ports detected
- [ 3.304246] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
- [ 3.324538] usb 4-1: New USB device found, idVendor=04b4, idProduct=6500, bcdDevice=50.10
- [ 3.324548] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 3.341588] hub 4-1:1.0: USB hub found
- [ 3.341643] hub 4-1:1.0: 4 ports detected
- [ 3.536432] [drm] UVD and UVD ENC initialized successfully.
- [ 3.564183] usb 3-1.1: new high-speed USB device number 3 using xhci-hcd
- [ 3.637362] [drm] VCE initialized successfully.
- [ 3.638447] kfd kfd: Allocated 3969056 bytes on gart
- [ 3.638566] Virtual CRAT table created for GPU
- [ 3.638691] amdgpu: Topology: Add dGPU node [0x67e3:0x1002]
- [ 3.638702] kfd kfd: added device 1002:67e3
- [ 3.638710] amdgpu 0004:01:00.0: amdgpu: SE 2, SH per SE 1, CU per SH 8, active_cu_number 16
- [ 3.646242] [drm] fb mappable at 0xA501816000
- [ 3.646250] [drm] vram apper at 0xA500000000
- [ 3.646254] [drm] size 19906560
- [ 3.646258] [drm] fb depth is 24
- [ 3.646262] [drm] pitch is 13824
- [ 3.664489] usb 3-1.1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
- [ 3.664495] usb 3-1.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 3.664499] usb 3-1.1: Product: USB 2.0 Hub
- [ 3.725534] hub 3-1.1:1.0: USB hub found
- [ 3.725596] hub 3-1.1:1.0: 4 ports detected
- [ 3.748804] usb 4-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
- [ 3.783949] usb 4-1.1: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.43
- [ 3.783954] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 3.783957] usb 4-1.1: Product: 4-Port USB 3.0 Hub
- [ 3.783960] usb 4-1.1: Manufacturer: Generic
- [ 3.809415] hub 4-1.1:1.0: USB hub found
- [ 3.810803] hub 4-1.1:1.0: 4 ports detected
- [ 3.860188] usb 3-1.3: new high-speed USB device number 4 using xhci-hcd
- [ 3.960368] usb 3-1.3: New USB device found, idVendor=0424, idProduct=2514, bcdDevice= b.b3
- [ 3.960373] usb 3-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 4.013487] hub 3-1.3:1.0: USB hub found
- [ 4.013538] hub 3-1.3:1.0: 4 ports detected
- [ 4.058477] Console: switching to colour frame buffer device 240x67
- [ 4.069348] fsl_dpaa2_eth dpni.0: fsl_mc_driver_probe failed: -19
- [ 4.086773] amdgpu 0004:01:00.0: [drm] fb0: amdgpudrmfb frame buffer device
- [ 4.137519] amdgpu 0004:01:00.0: amdgpu: Using BACO for runtime pm
- [ 4.138767] [drm] Initialized amdgpu 3.40.0 20150101 for 0004:01:00.0 on minor 0
- [ 4.148181] usb 3-1.1.1: new high-speed USB device number 5 using xhci-hcd
- [ 4.369116] usb 3-1.1.1: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.43
- [ 4.369174] usb 3-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 4.369216] usb 3-1.1.1: Product: 4-Port USB 2.0 Hub
- [ 4.369246] usb 3-1.1.1: Manufacturer: Generic
- [ 4.384156] raid6: neonx8 gen() 5710 MB/s
- [ 4.429930] hub 3-1.1.1:1.0: USB hub found
- [ 4.431028] hub 3-1.1.1:1.0: 4 ports detected
- [ 4.452156] raid6: neonx8 xor() 4172 MB/s
- [ 4.461406] usb 4-1.1.1: new SuperSpeed Gen 1 USB device number 4 using xhci-hcd
- [ 4.481054] usb 4-1.1.1: New USB device found, idVendor=17e9, idProduct=4349, bcdDevice=31.07
- [ 4.481107] usb 4-1.1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 4.481149] usb 4-1.1.1: Product: Kensington SD4700P Dual Video Dock
- [ 4.481185] usb 4-1.1.1: Manufacturer: DisplayLink
- [ 4.481214] usb 4-1.1.1: SerialNumber: 10025983
- [ 4.520155] raid6: neonx4 gen() 5758 MB/s
- [ 4.560190] usb 3-1.3.2: new high-speed USB device number 6 using xhci-hcd
- [ 4.588156] raid6: neonx4 xor() 4325 MB/s
- [ 4.656156] raid6: neonx2 gen() 5104 MB/s
- [ 4.662256] usb 3-1.3.2: New USB device found, idVendor=2109, idProduct=2811, bcdDevice=90.90
- [ 4.662309] usb 3-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 4.664651] usb 3-1.3.2: Product: USB2.0 Hub
- [ 4.666929] usb 3-1.3.2: Manufacturer: VIA Labs, Inc.
- [ 4.717557] hub 3-1.3.2:1.0: USB hub found
- [ 4.720032] hub 3-1.3.2:1.0: 4 ports detected
- [ 4.724157] raid6: neonx2 xor() 3950 MB/s
- [ 4.792158] raid6: neonx1 gen() 3924 MB/s
- [ 4.860157] raid6: neonx1 xor() 3158 MB/s
- [ 4.860183] usb 3-1.1.2: new full-speed USB device number 7 using xhci-hcd
- [ 4.928159] raid6: int64x8 gen() 3102 MB/s
- [ 4.996156] raid6: int64x8 xor() 1897 MB/s
- [ 5.064160] raid6: int64x4 gen() 3342 MB/s
- [ 5.086852] usb 3-1.1.2: New USB device found, idVendor=0bda, idProduct=5454, bcdDevice= 1.05
- [ 5.088924] usb 3-1.1.2: New USB device strings: Mfr=17, Product=18, SerialNumber=19
- [ 5.091000] usb 3-1.1.2: Product: BillBoard Device
- [ 5.093020] usb 3-1.1.2: Manufacturer: Realtek
- [ 5.095049] usb 3-1.1.2: SerialNumber: 123456789ABCDEFGH
- [ 5.132156] raid6: int64x4 xor() 1917 MB/s
- [ 5.168808] usb 4-1.1.2: new SuperSpeed Gen 1 USB device number 5 using xhci-hcd
- [ 5.200162] raid6: int64x2 gen() 3146 MB/s
- [ 5.202262] usb 4-1.1.2: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.37
- [ 5.204408] usb 4-1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 5.206454] usb 4-1.1.2: Product: 4-Port USB 3.0 Hub
- [ 5.208512] usb 4-1.1.2: Manufacturer: Generic
- [ 5.233452] hub 4-1.1.2:1.0: USB hub found
- [ 5.236892] hub 4-1.1.2:1.0: 4 ports detected
- [ 5.268161] raid6: int64x2 xor() 1720 MB/s
- [ 5.272189] usb 3-1.1.1.2: new high-speed USB device number 8 using xhci-hcd
- [ 5.336164] raid6: int64x1 gen() 2411 MB/s
- [ 5.391416] usb 3-1.1.1.2: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.37
- [ 5.393739] usb 3-1.1.1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 5.396039] usb 3-1.1.1.2: Product: 4-Port USB 2.0 Hub
- [ 5.398336] usb 3-1.1.1.2: Manufacturer: Generic
- [ 5.404155] raid6: int64x1 xor() 1280 MB/s
- [ 5.406455] raid6: using algorithm neonx4 gen() 5758 MB/s
- [ 5.408732] raid6: .... xor() 4325 MB/s, rmw enabled
- [ 5.411011] raid6: using neon recovery algorithm
- [ 5.416141] xor: measuring software checksum speed
- [ 5.419428] 8regs : 8152 MB/sec
- [ 5.422504] 32regs : 9659 MB/sec
- [ 5.425689] arm64_neon : 8532 MB/sec
- [ 5.427730] xor: using function: 32regs (9659 MB/sec)
- [ 5.431415] async_tx: api initialized (async)
- [ 5.454172] hub 3-1.1.1.2:1.0: USB hub found
- [ 5.457860] hub 3-1.1.1.2:1.0: 4 ports detected
- [ 5.464181] usb 3-1.3.4: new full-speed USB device number 9 using xhci-hcd
- [ 5.546398] Btrfs loaded, crc32c=crc32c-generic, zoned=yes
- [ 5.585578] usb 3-1.3.4: New USB device found, idVendor=16c0, idProduct=0483, bcdDevice= 2.72
- [ 5.587868] usb 3-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 5.590129] usb 3-1.3.4: Product: USB Serial
- [ 5.592393] usb 3-1.3.4: Manufacturer: Teensyduino
- [ 5.594719] usb 3-1.3.4: SerialNumber: 12345
- [ 5.680198] usb 3-1.3.2.1: new high-speed USB device number 10 using xhci-hcd
- [ 5.684478] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null). Quota mode: none.
- [ 5.801747] usb 3-1.3.2.1: New USB device found, idVendor=041e, idProduct=322c, bcdDevice= 1.00
- [ 5.804285] usb 3-1.3.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 5.806625] usb 3-1.3.2.1: Product: SB Omni Surround 5.1
- [ 5.809205] usb 3-1.3.2.1: Manufacturer: Creative Technology Ltd
- [ 5.811577] usb 3-1.3.2.1: SerialNumber: 000000MG
- [ 5.901304] usb 4-1.1.2.2: new SuperSpeed Gen 1 USB device number 6 using xhci-hcd
- [ 5.930256] usb 4-1.1.2.2: New USB device found, idVendor=0bda, idProduct=0411, bcdDevice= 1.04
- [ 5.932673] usb 4-1.1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 5.935062] usb 4-1.1.2.2: Product: 4-Port USB 3.0 Hub
- [ 5.937490] usb 4-1.1.2.2: Manufacturer: Generic
- [ 5.967570] hub 4-1.1.2.2:1.0: USB hub found
- [ 5.971007] hub 4-1.1.2.2:1.0: 4 ports detected
- [ 6.004185] usb 3-1.1.1.2.1: new high-speed USB device number 11 using xhci-hcd
- [ 6.053836] systemd[1]: Inserted module 'autofs4'
- [ 6.079759] systemd[1]: systemd 247.3-3ubuntu3.4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
- [ 6.085502] systemd[1]: Detected architecture arm64.
- [ 6.105226] usb 3-1.1.1.2.1: New USB device found, idVendor=054c, idProduct=0291, bcdDevice= 4.59
- [ 6.107951] usb 3-1.1.1.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 6.110643] usb 3-1.1.1.2.1: Product: DRX-820U
- [ 6.113333] usb 3-1.1.1.2.1: Manufacturer: Sony
- [ 6.115945] usb 3-1.1.1.2.1: SerialNumber: DRX-820U_MP000407F
- [ 6.139875] systemd[1]: Set hostname to <wootylx2k-ubn>.
- [ 6.200173] usb 3-1.3.2.2: new full-speed USB device number 12 using xhci-hcd
- [ 6.247667] random: lvmconfig: uninitialized urandom read (4 bytes read)
- [ 6.323335] usb 3-1.3.2.2: New USB device found, idVendor=0738, idProduct=1708, bcdDevice= 2.22
- [ 6.326047] usb 3-1.3.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 6.328683] usb 3-1.3.2.2: Product: Mad Catz R.A.T.7 Mouse
- [ 6.331350] usb 3-1.3.2.2: Manufacturer: Mad Catz
- [ 6.404195] usb 3-1.1.1.2.2: new high-speed USB device number 13 using xhci-hcd
- [ 6.448000] systemd[1]: /lib/systemd/system/plymouth-start.service:17: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
- [ 6.514550] usb 3-1.1.1.2.2: New USB device found, idVendor=0bda, idProduct=5411, bcdDevice= 1.04
- [ 6.514705] systemd[1]: Queued start job for default target Graphical Interface.
- [ 6.517521] usb 3-1.1.1.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 6.523446] usb 3-1.1.1.2.2: Product: 4-Port USB 2.0 Hub
- [ 6.526451] usb 3-1.1.1.2.2: Manufacturer: Generic
- [ 6.570651] systemd[1]: Created slice Virtual Machine and Container Slice.
- [ 6.573927] hub 3-1.1.1.2.2:1.0: USB hub found
- [ 6.576944] hub 3-1.1.1.2.2:1.0: 4 ports detected
- [ 6.587350] systemd[1]: Created slice system-modprobe.slice.
- [ 6.596975] systemd[1]: Created slice system-systemd\x2dfsck.slice.
- [ 6.605143] usb 4-1.1.2.2.2: new SuperSpeed Gen 1 USB device number 7 using xhci-hcd
- [ 6.606378] systemd[1]: Created slice User and Session Slice.
- [ 6.616370] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 6.624714] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- [ 6.629107] usb 4-1.1.2.2.2: New USB device found, idVendor=154b, idProduct=00d9, bcdDevice= 1.00
- [ 6.629113] usb 4-1.1.2.2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 6.629117] usb 4-1.1.2.2.2: Product: USB 3.0 FD
- [ 6.629120] usb 4-1.1.2.2.2: Manufacturer: PNY
- [ 6.629122] usb 4-1.1.2.2.2: SerialNumber: 070197A2DD44BA21
- [ 6.648297] systemd[1]: Reached target Slices.
- [ 6.656511] systemd[1]: Reached target Libvirt guests shutdown.
- [ 6.664667] systemd[1]: Listening on Device-mapper event daemon FIFOs.
- [ 6.673011] systemd[1]: Listening on LVM2 poll daemon socket.
- [ 6.681249] systemd[1]: Listening on multipathd control socket.
- [ 6.689706] systemd[1]: Listening on Syslog Socket.
- [ 6.697967] systemd[1]: Listening on fsck to fsckd communication Socket.
- [ 6.706272] systemd[1]: Listening on initctl Compatibility Named Pipe.
- [ 6.714813] systemd[1]: Listening on Journal Audit Socket.
- [ 6.720182] usb 3-1.3.2.4: new full-speed USB device number 14 using xhci-hcd
- [ 6.726443] systemd[1]: Listening on Journal Socket (/dev/log).
- [ 6.734700] systemd[1]: Listening on Journal Socket.
- [ 6.742620] systemd[1]: Listening on Network Service Netlink Socket.
- [ 6.750453] systemd[1]: Listening on udev Control Socket.
- [ 6.758250] systemd[1]: Listening on udev Kernel Socket.
- [ 6.768422] systemd[1]: Mounting Huge Pages File System...
- [ 6.779214] systemd[1]: Mounting POSIX Message Queue File System...
- [ 6.789811] systemd[1]: Mounting Kernel Debug File System...
- [ 6.800308] systemd[1]: Mounting Kernel Trace File System...
- [ 6.811936] systemd[1]: Starting Journal Service...
- [ 6.823620] systemd[1]: Starting Set the console keyboard layout...
- [ 6.834822] systemd[1]: Starting Create list of static device nodes for the current kernel...
- [ 6.838861] usb 3-1.3.2.4: New USB device found, idVendor=1b1c, idProduct=1b37, bcdDevice= 3.08
- [ 6.838867] usb 3-1.3.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 6.838870] usb 3-1.3.2.4: Product: Corsair Gaming K65 LUX RGB Keyboard
- [ 6.838873] usb 3-1.3.2.4: Manufacturer: Corsair
- [ 6.838875] usb 3-1.3.2.4: SerialNumber: 0703900DAEBA044455DA2916F5001943
- [ 6.859303] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
- [ 6.867504] random: lvm: uninitialized urandom read (4 bytes read)
- [ 6.869768] systemd[1]: Starting Load Kernel Module configfs...
- [ 6.880464] systemd[1]: Starting Load Kernel Module drm...
- [ 6.890099] systemd[1]: Starting Load Kernel Module fuse...
- [ 6.897515] systemd[1]: Condition check resulted in OpenVSwitch configuration for cleanup being skipped.
- [ 6.903628] systemd[1]: Starting Set Up Additional Binary Formats...
- [ 6.911378] systemd[1]: Condition check resulted in File System Check on Root Device being skipped.
- [ 6.917518] systemd[1]: Starting Load Kernel Modules...
- [ 6.927704] systemd[1]: Starting Remount Root and Kernel File Systems...
- [ 6.938408] systemd[1]: Starting Coldplug All udev Devices...
- [ 6.939480] EXT4-fs (sda2): re-mounted. Opts: (null). Quota mode: none.
- [ 6.939776] lp: driver loaded but no devices found
- [ 6.944196] usb 3-1.1.1.2.2.1: new high-speed USB device number 15 using xhci-hcd
- [ 6.951110] ppdev: user-space parallel port driver
- [ 6.957113] evdi: loading out-of-tree module taints kernel.
- [ 6.962771] evdi: [I] Initialising logging on level 5
- [ 6.963581] systemd[1]: Starting Uncomplicated firewall...
- [ 6.965919] evdi: [I] Atomic driver: yes
- [ 6.966080] evdi: [D] evdi_platform_add_devices:158 Increasing device count to 4
- [ 6.974417] evdi: [D] evdi_crtc_init:413 drm_crtc_init: 0 p(____ptrval____)
- [ 6.974446] evdi: [D] evdi_detect:94 (dev=0) poll connector state: disconnected
- [ 6.974460] evdi evdi.0: [drm] Cannot find any crtc or sizes
- [ 6.974481] evdi: [W] evdi_painter_send_update_ready_if_needed:706 Painter does not exist!
- [ 6.974834] [drm] Initialized evdi 1.9.1 20210126 for evdi.0 on minor 1
- [ 6.974855] evdi: [I] Evdi platform_device create
- [ 6.975029] evdi: [D] evdi_crtc_init:413 drm_crtc_init: 0 p(____ptrval____)
- [ 6.975046] evdi: [D] evdi_detect:94 (dev=0) poll connector state: disconnected
- [ 6.975054] evdi evdi.1: [drm] Cannot find any crtc or sizes
- [ 6.975064] evdi: [W] evdi_painter_send_update_ready_if_needed:706 Painter does not exist!
- [ 6.975334] [drm] Initialized evdi 1.9.1 20210126 for evdi.1 on minor 2
- [ 6.975358] evdi: [I] Evdi platform_device create
- [ 6.975518] evdi: [D] evdi_crtc_init:413 drm_crtc_init: 0 p(____ptrval____)
- [ 6.975533] evdi: [D] evdi_detect:94 (dev=0) poll connector state: disconnected
- [ 6.975540] evdi evdi.2: [drm] Cannot find any crtc or sizes
- [ 6.975550] evdi: [W] evdi_painter_send_update_ready_if_needed:706 Painter does not exist!
- [ 6.975777] [drm] Initialized evdi 1.9.1 20210126 for evdi.2 on minor 3
- [ 6.975801] evdi: [I] Evdi platform_device create
- [ 6.975962] evdi: [D] evdi_crtc_init:413 drm_crtc_init: 0 p(____ptrval____)
- [ 6.975976] evdi: [D] evdi_detect:94 (dev=0) poll connector state: disconnected
- [ 6.975983] evdi evdi.3: [drm] Cannot find any crtc or sizes
- [ 6.975992] evdi: [W] evdi_painter_send_update_ready_if_needed:706 Painter does not exist!
- [ 6.976216] [drm] Initialized evdi 1.9.1 20210126 for evdi.3 on minor 4
- [ 6.976241] evdi: [I] Evdi platform_device create
- [ 7.045759] systemd[1]: Started Journal Service.
- [ 7.068521] usb 3-1.1.1.2.2.1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
- [ 7.068529] usb 3-1.1.1.2.2.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 7.068532] usb 3-1.1.1.2.2.1: Product: USB 2.0 Hub
- [ 7.117171] hub 3-1.1.1.2.2.1:1.0: Unsupported bus topology: hub nested too deep
- [ 7.119755] hub: probe of 3-1.1.1.2.2.1:1.0 failed with error -7
- [ 7.178883] systemd-journald[604]: Received client request to flush runtime journal.
- [ 7.184193] Adding 8388604k swap on /swap.img. Priority:-2 extents:7 across:8953852k SSFS
- [ 7.351259] alua: device handler registered
- [ 7.353087] emc: device handler registered
- [ 7.355033] rdac: device handler registered
- [ 7.452305] loop0: detected capacity change from 0 to 264784
- [ 7.464337] hid: raw HID events driver (C) Jiri Kosina
- [ 7.483138] usbhid 3-1.3.2.1:1.4: can't add hid device: -71
- [ 7.483186] usbhid: probe of 3-1.3.2.1:1.4 failed with error -71
- [ 7.493284] loop1: detected capacity change from 0 to 100160
- [ 7.493878] usbcore: registered new interface driver usbhid
- [ 7.493885] usbhid: USB HID core driver
- [ 7.530235] loop2: detected capacity change from 0 to 100168
- [ 7.582468] loop3: detected capacity change from 0 to 300952
- [ 7.609663] loop4: detected capacity change from 0 to 117464
- [ 7.642591] loop5: detected capacity change from 0 to 124888
- [ 7.676825] loop6: detected capacity change from 0 to 2440
- [ 7.677194] loop7: detected capacity change from 0 to 180040
- [ 7.797198] random: crng init done
- [ 7.818103] cdc_acm 3-1.3.4:1.0: ttyACM0: USB ACM device
- [ 7.818789] usbcore: registered new interface driver cdc_acm
- [ 7.818794] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 7.820264] loop8: detected capacity change from 0 to 133320
- [ 7.861719] usbcore: registered new interface driver cdc_ether
- [ 7.862879] usb-storage 3-1.1.1.2.1:1.0: USB Mass Storage device detected
- [ 7.863521] scsi host4: usb-storage 3-1.1.1.2.1:1.0
- [ 7.863877] pstore: Using crash dump compression: deflate
- [ 7.863894] pstore: Registered efi as persistent store backend
- [ 7.864216] usb-storage 4-1.1.2.2.2:1.0: USB Mass Storage device detected
- [ 7.869164] scsi host5: usb-storage 4-1.1.2.2.2:1.0
- [ 7.869634] usbcore: registered new interface driver usb-storage
- [ 7.880301] loop9: detected capacity change from 0 to 57488
- [ 7.925953] loop10: detected capacity change from 0 to 57472
- [ 7.961493] input: Mad Catz Mad Catz R.A.T.7 Mouse as /devices/platform/808622B7:01/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2.2/3-1.3.2.2:1.0/0003:0738:1708.0001/input/input1
- [ 7.961499] usbcore: registered new interface driver uas
- [ 7.961752] hid-generic 0003:0738:1708.0001: input,hidraw0: USB HID v1.11 Mouse [Mad Catz Mad Catz R.A.T.7 Mouse] on usb-808622B7:01-1.3.2.2/input0
- [ 7.963852] input: Corsair Corsair Gaming K65 LUX RGB Keyboard Keyboard as /devices/platform/808622B7:01/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2.4/3-1.3.2.4:1.0/0003:1B1C:1B37.0002/input/input2
- [ 7.969577] mc: Linux media interface: v0.10
- [ 7.981009] cdc_ncm 4-1.1.1:1.5: MAC-Address: 00:50:b6:a4:14:45
- [ 7.981018] cdc_ncm 4-1.1.1:1.5: setting rx_max = 16384
- [ 7.981145] cdc_ncm 4-1.1.1:1.5: setting tx_max = 16384
- [ 7.981455] cdc_ncm 4-1.1.1:1.5 usb0: register 'cdc_ncm' at usb-808622B7:01-1.1.1, CDC NCM, 00:50:b6:a4:14:45
- [ 7.981557] usbcore: registered new interface driver cdc_ncm
- [ 8.020480] input: Corsair Corsair Gaming K65 LUX RGB Keyboard Consumer Control as /devices/platform/808622B7:01/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2.4/3-1.3.2.4:1.0/0003:1B1C:1B37.0002/input/input3
- [ 8.020598] input: Corsair Corsair Gaming K65 LUX RGB Keyboard as /devices/platform/808622B7:01/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2.4/3-1.3.2.4:1.0/0003:1B1C:1B37.0002/input/input4
- [ 8.020710] input: Corsair Corsair Gaming K65 LUX RGB Keyboard as /devices/platform/808622B7:01/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2.4/3-1.3.2.4:1.0/0003:1B1C:1B37.0002/input/input5
- [ 8.020954] hid-generic 0003:1B1C:1B37.0002: input,hiddev0,hidraw1: USB HID v1.11 Keyboard [Corsair Corsair Gaming K65 LUX RGB Keyboard ] on usb-808622B7:01-1.3.2.4/input0
- [ 8.021246] hid-generic 0003:1B1C:1B37.0003: hiddev1,hidraw2: USB HID v1.11 Device [Corsair Corsair Gaming K65 LUX RGB Keyboard ] on usb-808622B7:01-1.3.2.4/input1
- [ 8.037812] loop11: detected capacity change from 0 to 124096
- [ 8.042041] usbcore: registered new interface driver cdc_wdm
- [ 8.044904] usbcore: registered new interface driver cdc_mbim
- [ 8.061883] cdc_ncm 4-1.1.1:1.5 enx0050b6a41445: renamed from usb0
- [ 8.130028] snd_hda_intel 0004:01:00.1: Adding to iommu group 8
- [ 8.130196] snd_hda_intel 0004:01:00.1: enabling device (0000 -> 0002)
- [ 8.130215] snd_hda_intel 0004:01:00.1: Force to snoop mode by module option
- [ 8.140398] snd_hda_intel 0004:01:00.1: bound 0004:01:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
- [ 8.143553] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0004:01/0004:01:00.1/sound/card0/input6
- [ 8.143668] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0004:01/0004:01:00.1/sound/card0/input7
- [ 8.143792] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0004:01/0004:01:00.1/sound/card0/input8
- [ 8.143910] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0004:01/0004:01:00.1/sound/card0/input9
- [ 8.144018] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0004:01/0004:01:00.1/sound/card0/input10
- [ 8.158096] usb 4-1.1.1: Warning! Unlikely big volume range (=511), cval->res is probably wrong.
- [ 8.158106] usb 4-1.1.1: [15] FU [SD4700P USB Audio Playback Volume] ch = 6, val = -8176/0/16
- [ 8.158714] usb 4-1.1.1: Warning! Unlikely big volume range (=767), cval->res is probably wrong.
- [ 8.158719] usb 4-1.1.1: [12] FU [Mic Capture Volume] ch = 2, val = -4592/7680/16
- [ 8.159487] usb 3-1.3.2.1: parse_audio_format_rates_v2v3(): unable to retrieve number of sample rates (clock 18)
- [ 8.161896] usb 3-1.3.2.1: parse_audio_format_rates_v2v3(): unable to retrieve number of sample rates (clock 18)
- [ 8.163771] usb 3-1.3.2.1: parse_audio_format_rates_v2v3(): unable to retrieve number of sample rates (clock 18)
- [ 8.165952] usb 3-1.3.2.1: parse_audio_format_rates_v2v3(): unable to retrieve number of sample rates (clock 18)
- [ 8.168100] usb 3-1.3.2.1: parse_audio_format_rates_v2v3(): unable to retrieve number of sample rates (clock 20)
- [ 8.169874] usb 3-1.3.2.1: parse_audio_format_rates_v2v3(): unable to retrieve number of sample rates (clock 20)
- [ 8.171637] usb 3-1.3.2.1: parse_audio_format_rates_v2v3(): unable to retrieve number of sample rates (clock 20)
- [ 8.173903] usb 3-1.3.2.1: parse_audio_format_rates_v2v3(): unable to retrieve number of sample rates (clock 19)
- [ 8.175574] usb 3-1.3.2.1: parse_audio_format_rates_v2v3(): unable to retrieve number of sample rates (clock 19)
- [ 8.177586] usb 3-1.3.2.1: cannot get ctl value: req = 0x83, wValue = 0x200, wIndex = 0x200, type = 4
- [ 8.179303] usb 3-1.3.2.1: 2:0: cannot get min/max values for control 2 (id 2)
- [ 8.182041] usb 3-1.3.2.1: cannot get ctl value: req = 0x83, wValue = 0x201, wIndex = 0xb00, type = 4
- [ 8.183674] usb 3-1.3.2.1: 11:0: cannot get min/max values for control 2 (id 11)
- [ 8.185723] usb 3-1.3.2.1: cannot get ctl value: req = 0x83, wValue = 0x201, wIndex = 0xd00, type = 4
- [ 8.187517] usb 3-1.3.2.1: 13:0: cannot get min/max values for control 2 (id 13)
- [ 8.189784] usbcore: registered new interface driver snd-usb-audio
- [ 8.326482] ax88179_178a 1-1:1.0 eth0: register 'ax88179_178a' at usb-808622B7:00-1, ASIX AX88179 USB 3.0 Gigabit Ethernet, 00:24:9b:1e:62:ae
- [ 8.326584] usbcore: registered new interface driver ax88179_178a
- [ 8.352551] ax88179_178a 1-1:1.0 enx00249b1e62ae: renamed from eth0
- [ 8.869122] scsi 4:0:0:0: CD-ROM SONY DVD RW DRU-820A 2.0b PQ: 0 ANSI: 0
- [ 8.875601] sr 4:0:0:0: [sr0] scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 8.875607] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 8.900717] scsi 5:0:0:0: Direct-Access PNY USB 3.0 FD PMAP PQ: 0 ANSI: 6
- [ 8.900789] sr 4:0:0:0: Attached scsi CD-ROM sr0
- [ 8.900943] sr 4:0:0:0: Attached scsi generic sg2 type 5
- [ 8.901311] sd 5:0:0:0: Attached scsi generic sg3 type 0
- [ 8.901563] sd 5:0:0:0: [sdc] 484442112 512-byte logical blocks: (248 GB/231 GiB)
- [ 8.901725] sd 5:0:0:0: [sdc] Write Protect is off
- [ 8.901730] sd 5:0:0:0: [sdc] Mode Sense: 2b 00 00 08
- [ 8.901882] sd 5:0:0:0: [sdc] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- [ 8.959977] sdc: sdc1
- [ 8.961243] sd 5:0:0:0: [sdc] Attached SCSI removable disk
- [ 9.220838] usb 3-1.3.2.1: cannot get ctl value: req = 0x83, wValue = 0x200, wIndex = 0x200, type = 4
- [ 9.222668] usb 3-1.3.2.1: 2:0: cannot get min/max values for control 2 (id 2)
- [ 9.224561] usb 3-1.3.2.1: cannot get ctl value: req = 0x83, wValue = 0x200, wIndex = 0x200, type = 4
- [ 9.226295] usb 3-1.3.2.1: 2:0: cannot get min/max values for control 2 (id 2)
- [ 9.228121] usb 3-1.3.2.1: cannot get ctl value: req = 0x83, wValue = 0x200, wIndex = 0x200, type = 4
- [ 9.229929] usb 3-1.3.2.1: 2:0: cannot get min/max values for control 2 (id 2)
- [ 9.231850] usb 3-1.3.2.1: cannot get ctl value: req = 0x83, wValue = 0x200, wIndex = 0x200, type = 4
- [ 9.233675] usb 3-1.3.2.1: 2:0: cannot get min/max values for control 2 (id 2)
- [ 9.235577] usb 3-1.3.2.1: cannot get ctl value: req = 0x83, wValue = 0x200, wIndex = 0x200, type = 4
- [ 9.237427] usb 3-1.3.2.1: 2:0: cannot get min/max values for control 2 (id 2)
- [ 9.239345] usb 3-1.3.2.1: cannot get ctl value: req = 0x83, wValue = 0x200, wIndex = 0x200, type = 4
- [ 9.241230] usb 3-1.3.2.1: 2:0: cannot get min/max values for control 2 (id 2)
- [ 9.243194] usb 3-1.3.2.1: cannot get ctl value: req = 0x83, wValue = 0x200, wIndex = 0x200, type = 4
- [ 9.245145] usb 3-1.3.2.1: 2:0: cannot get min/max values for control 2 (id 2)
- [ 9.247150] usb 3-1.3.2.1: cannot get ctl value: req = 0x81, wValue = 0x200, wIndex = 0x200, type = 4
- [ 9.249201] usb 3-1.3.2.1: cannot get ctl value: req = 0x81, wValue = 0x200, wIndex = 0x200, type = 4
- [ 9.251257] usb 3-1.3.2.1: cannot get ctl value: req = 0x81, wValue = 0x100, wIndex = 0x200, type = 1
- [ 9.901685] usb 3-1.3.2.1: USB disconnect, device number 10
- [ 10.168176] usb 3-1.3.2.1: new high-speed USB device number 16 using xhci-hcd
- [ 10.281772] usb 3-1.3.2.1: New USB device found, idVendor=041e, idProduct=322c, bcdDevice= 1.00
- [ 10.281781] usb 3-1.3.2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 10.281785] usb 3-1.3.2.1: Product: SB Omni Surround 5.1
- [ 10.281789] usb 3-1.3.2.1: Manufacturer: Creative Technology Ltd
- [ 10.281792] usb 3-1.3.2.1: SerialNumber: 000000MG
- [ 12.204480] audit: type=1400 audit(1628472844.295:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/lxc-start" pid=1258 comm="apparmor_parser"
- [ 12.207112] audit: type=1400 audit(1628472844.295:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=1266 comm="apparmor_parser"
- [ 12.207169] audit: type=1400 audit(1628472844.295:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=1254 comm="apparmor_parser"
- [ 12.208230] audit: type=1400 audit(1628472844.299:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="lsb_release" pid=1264 comm="apparmor_parser"
- [ 12.209652] audit: type=1400 audit(1628472844.299:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oosplash" pid=1257 comm="apparmor_parser"
- [ 12.212686] audit: type=1400 audit(1628472844.303:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=1251 comm="apparmor_parser"
- [ 12.212699] audit: type=1400 audit(1628472844.303:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=1251 comm="apparmor_parser"
- [ 12.212706] audit: type=1400 audit(1628472844.303:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=1251 comm="apparmor_parser"
- [ 12.212838] audit: type=1400 audit(1628472844.303:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirtd" pid=1250 comm="apparmor_parser"
- [ 12.212846] audit: type=1400 audit(1628472844.303:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libvirtd//qemu_bridge_helper" pid=1250 comm="apparmor_parser"
- [ 16.100770] input: Creative Technology Ltd SB Omni Surround 5.1 Consumer Control as /devices/platform/808622B7:01/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2.1/3-1.3.2.1:1.4/0003:041E:322C.0004/input/input11
- [ 16.160331] input: Creative Technology Ltd SB Omni Surround 5.1 Keyboard as /devices/platform/808622B7:01/usb3/3-1/3-1.3/3-1.3.2/3-1.3.2.1/3-1.3.2.1:1.4/0003:041E:322C.0004/input/input12
- [ 16.160470] hid-generic 0003:041E:322C.0004: input,hidraw3: USB HID v1.11 Keyboard [Creative Technology Ltd SB Omni Surround 5.1] on usb-808622B7:01-1.3.2.1/input4
- [ 17.015990] ax88179_178a 1-1:1.0 enx00249b1e62ae: ax88179 - Link status is: 1
- [ 17.021303] IPv6: ADDRCONF(NETDEV_CHANGE): enx00249b1e62ae: link becomes ready
- [ 20.191084] new mount options do not match the existing superblock, will be ignored
- [ 20.529291] input: ckb1: Corsair Gaming K65 LUX RGB Keyboard vKB as /devices/virtual/input/input13
- [ 20.529725] input: ckb1: Corsair Gaming K65 LUX RGB Keyboard vM as /devices/virtual/input/input14
- [ 20.585134] kauditd_printk_skb: 53 callbacks suppressed
- [ 20.585142] audit: type=1400 audit(1628472852.675:65): apparmor="DENIED" operation="capable" profile="/usr/sbin/cupsd" pid=1430 comm="cupsd" capability=12 capname="net_admin"
- [ 20.769905] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
- [ 21.060660] audit: type=1400 audit(1628472853.151:66): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="/usr/bin/lxc-start" pid=1608 comm="apparmor_parser"
- [ 21.092665] audit: type=1400 audit(1628472853.183:67): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default" pid=1616 comm="apparmor_parser"
- [ 21.092681] audit: type=1400 audit(1628472853.183:68): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default-cgns" pid=1616 comm="apparmor_parser"
- [ 21.092689] audit: type=1400 audit(1628472853.183:69): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default-with-mounting" pid=1616 comm="apparmor_parser"
- [ 21.092697] audit: type=1400 audit(1628472853.183:70): apparmor="STATUS" operation="profile_replace" info="same as current profile, skipping" profile="unconfined" name="lxc-container-default-with-nesting" pid=1616 comm="apparmor_parser"
- [ 22.028058] evdi: [D] evdi_detect:94 (dev=0) poll connector state: disconnected
- [ 22.030202] evdi: [D] evdi_detect:94 (dev=0) poll connector state: disconnected
- [ 22.032091] evdi: [D] evdi_detect:94 (dev=0) poll connector state: disconnected
- [ 22.033997] evdi: [D] evdi_detect:94 (dev=0) poll connector state: disconnected
- [ 25.317730] rfkill: input handler disabled
- [ 25.870088] evdi: [D] evdi_painter_dpms_notify:715 (dev=0) Notifying dpms mode: 3
- [ 25.870101] evdi: [W] evdi_painter_send_event:321 Painter is not connected!
- [ 25.870127] evdi: [D] evdi_painter_dpms_notify:715 (dev=0) Notifying dpms mode: 3
- [ 25.870132] evdi: [W] evdi_painter_send_event:321 Painter is not connected!
- [ 25.870150] evdi: [D] evdi_painter_dpms_notify:715 (dev=0) Notifying dpms mode: 3
- [ 25.870154] evdi: [W] evdi_painter_send_event:321 Painter is not connected!
- [ 25.870172] evdi: [D] evdi_painter_dpms_notify:715 (dev=0) Notifying dpms mode: 3
- [ 25.870176] evdi: [W] evdi_painter_send_event:321 Painter is not connected!
- [ 26.563722] audit: type=1400 audit(1628472858.651:71): apparmor="DENIED" operation="capable" profile="/usr/sbin/cups-browsed" pid=1466 comm="cups-browsed" capability=23 capname="sys_nice"
- [ 26.613374] loop12: detected capacity change from 0 to 8
- [ 40.305924] rfkill: input handler enabled
- [ 40.862670] evdi: [D] evdi_detect:94 (dev=0) poll connector state: disconnected
- [ 40.864487] evdi: [D] evdi_detect:94 (dev=0) poll connector state: disconnected
- [ 40.866458] evdi: [D] evdi_detect:94 (dev=0) poll connector state: disconnected
- [ 40.868320] evdi: [D] evdi_detect:94 (dev=0) poll connector state: disconnected
- [ 43.967716] exFAT-fs (sdc1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
- [ 44.006203] rfkill: input handler disabled
- [ 45.747646] evdi: [D] evdi_painter_dpms_notify:715 (dev=0) Notifying dpms mode: 3
- [ 45.747659] evdi: [W] evdi_painter_send_event:321 Painter is not connected!
- [ 45.747682] evdi: [D] evdi_painter_dpms_notify:715 (dev=0) Notifying dpms mode: 3
- [ 45.747687] evdi: [W] evdi_painter_send_event:321 Painter is not connected!
- [ 45.747708] evdi: [D] evdi_painter_dpms_notify:715 (dev=0) Notifying dpms mode: 3
- [ 45.747712] evdi: [W] evdi_painter_send_event:321 Painter is not connected!
- [ 45.747730] evdi: [D] evdi_painter_dpms_notify:715 (dev=0) Notifying dpms mode: 3
- [ 45.747734] evdi: [W] evdi_painter_send_event:321 Painter is not connected!
- [ 46.357647] evdi: [D] evdi_driver_postclose:230 (dev=0) Process tries to close us, postclose
- [ 46.357660] evdi: [I] Task 1 (systemd) of process 1 (systemd)
- [ 46.357787] evdi: [D] evdi_driver_postclose:230 (dev=0) Process tries to close us, postclose
- [ 46.357792] evdi: [I] Task 1 (systemd) of process 1 (systemd)
- [ 46.357896] evdi: [D] evdi_driver_postclose:230 (dev=0) Process tries to close us, postclose
- [ 46.357900] evdi: [I] Task 1 (systemd) of process 1 (systemd)
- [ 46.357999] evdi: [D] evdi_driver_postclose:230 (dev=0) Process tries to close us, postclose
- [ 46.358004] evdi: [I] Task 1 (systemd) of process 1 (systemd)
- [ 659.419251] amdgpu 0004:01:00.0: amdgpu: GPU fault detected: 146 0x0028480c for process Primary thread pid 3847 thread xr_3da:cs0 pid 3851
- [ 659.419269] amdgpu 0004:01:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00000005
- [ 659.419274] amdgpu 0004:01:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0804800C
- [ 659.419278] amdgpu 0004:01:00.0: amdgpu: VM fault (0x0c, vmid 4, pasid 32771) at page 5, read from 'TC0' (0x54433000) (72)
- [ 712.861951] amdgpu 0004:01:00.0: amdgpu: GPU fault detected: 146 0x0000480c for process Primary thread pid 3847 thread xr_3da:cs0 pid 3851
- [ 712.861969] amdgpu 0004:01:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00000000
- [ 712.861974] amdgpu 0004:01:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0804800C
- [ 712.861978] amdgpu 0004:01:00.0: amdgpu: VM fault (0x0c, vmid 4, pasid 32771) at page 0, read from 'TC0' (0x54433000) (72)
- [ 791.740070] amdgpu 0004:01:00.0: amdgpu: GPU fault detected: 146 0x0018440c for process Primary thread pid 3847 thread xr_3da:cs0 pid 3851
- [ 791.740089] amdgpu 0004:01:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00000003
- [ 791.740093] amdgpu 0004:01:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0804400C
- [ 791.740097] amdgpu 0004:01:00.0: amdgpu: VM fault (0x0c, vmid 4, pasid 32771) at page 3, read from 'TC1' (0x54433100) (68)
- [ 1324.886764] amdgpu 0004:01:00.0: amdgpu: GPU fault detected: 146 0x0000080c for process Primary thread pid 4215 thread xr_3da:cs0 pid 4218
- [ 1324.886782] amdgpu 0004:01:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_ADDR 0x00000000
- [ 1324.886787] amdgpu 0004:01:00.0: amdgpu: VM_CONTEXT1_PROTECTION_FAULT_STATUS 0x0E00800C
- [ 1324.886791] amdgpu 0004:01:00.0: amdgpu: VM fault (0x0c, vmid 7, pasid 32771) at page 0, read from 'TC2' (0x54433200) (8)
- [ 7379.102881] evdi: [D] evdi_driver_postclose:230 (dev=0) Process tries to close us, postclose
- [ 7379.102891] evdi: [I] Task 14501 (Xorg.wrap) of process 14501 (Xorg.wrap)
- [ 7379.102914] evdi: [D] evdi_driver_postclose:230 (dev=0) Process tries to close us, postclose
- [ 7379.102918] evdi: [I] Task 14501 (Xorg.wrap) of process 14501 (Xorg.wrap)
- [ 7379.102937] evdi: [D] evdi_driver_postclose:230 (dev=0) Process tries to close us, postclose
- [ 7379.102941] evdi: [I] Task 14501 (Xorg.wrap) of process 14501 (Xorg.wrap)
- [ 7379.102960] evdi: [D] evdi_driver_postclose:230 (dev=0) Process tries to close us, postclose
- [ 7379.102964] evdi: [I] Task 14501 (Xorg.wrap) of process 14501 (Xorg.wrap)
Add Comment
Please, Sign In to add comment