Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ```
- =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2021.04.07 19:43:11 =~=~=~=~=~=~=~=~=~=~=~=
- 3: System Boot system code via Flash[1st image].
- ## Booting image at bc050000 ...
- Skip checking image magic number
- Bad Header Checksum
- 3: 1st image corrupted. System Boot system code via Flash[2nd image].
- ## Booting image at bd150000 ...
- Skip checking image magic number
- Bad Header Checksum
- ip checking image magic number
- Image Name: ▒~▒
- Image Type: MIPS Linux Kernel Image (lzma compressed)
- Data Size: 9731755 Bytes = 9.3 MB
- Load Address: 80001000
- Entry Point: 8000d210
- Verifying Checksum ... OK
- Uncompressing Kernel Image ...
- ===================================================================
- MT7621 stage1 code Mar 12 2015 14:43:30 (ASIC)
- CPU=500000000 HZ BUS=166666666 HZ
- ==================================================================
- Change MPLL source from XTAL to CR...
- do MEMPLL setting..
- MEMPLL Config : 0x11000000
- 3PLL mode + External loopback
- === XTAL-40Mhz === DDR-1200Mhz ===
- PLL3 FB_DL: 0xb, 1/0 = 519/505 2D000000
- PLL2 FB_DL: 0x16, 1/0 = 516/508 59000000
- PLL4 FB_DL: 0x19, 1/0 = 573/451 65000000
- do DDR setting..[01F40000]
- Apply DDR3 Setting...(use default AC)
- 0 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120
- --------------------------------------------------------------------------------
- 0000:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0001:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0002:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0003:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0004:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0005:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0006:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0007:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0008:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0009:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
- 000E:| 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1
- 000F:| 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0
- 0010:| 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
- 0011:| 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
- 0012:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0013:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0014:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0015:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0016:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0017:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0018:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0019:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001F:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- DRAMC_DQSCTL1[0e0]=13000000
- DRAMC_DQSGCTL[124]=80000033
- rank 0 coarse = 15
- rank 0 fine = 80
- B:| 0 0 0 0 0 0 0 0 1 1 1 0 0 0 0 0
- opt_dle value:9
- DRAMC_DDR2CTL[07c]=C287221D
- DRAMC_PADCTL4[0e4]=000022B3
- DRAMC_DQIDLY1[210]=0D0C090B
- DRAMC_DQIDLY2[214]=08090A09
- DRAMC_DQIDLY3[218]=0D090908
- DRAMC_DQIDLY4[21c]=0C090C0A
- DRAMC_R0DELDLY[018]=00001F1F
- ==================================================================
- RX DQS perbit delay software calibration
- ==================================================================
- 1.0-15 bit dq delay value
- ==================================================================
- bit| 0 1 2 3 4 5 6 7 8 9
- --------------------------------------
- 0 | 11 9 10 12 9 10 9 8 6 7
- 10 | 7 10 9 11 9 10
- --------------------------------------
- ==================================================================
- 2.dqs window
- x=pass dqs delay value (min~max)center
- y=0-7bit DQ of every group
- input delay:DQS0 =31 DQS1 = 31
- ==================================================================
- bit DQS0 bit DQS1
- 0 (1~62)31 8 (1~58)29
- 1 (1~62)31 9 (1~58)29
- 2 (0~59)29 10 (1~58)29
- 3 (1~60)30 11 (1~56)28
- 4 (1~61)31 12 (1~59)30
- 5 (1~62)31 13 (2~58)30
- 6 (1~61)31 14 (2~61)31
- 7 (1~62)31 15 (1~58)29
- ==================================================================
- 3.dq delay value last
- ==================================================================
- bit| 0 1 2 3 4 5 6 7 8 9
- --------------------------------------
- 0 | 11 9 12 13 9 10 9 8 8 9
- 10 | 9 13 10 12 9 12
- ==================================================================
- ==================================================================
- TX perbyte calibration
- ==================================================================
- DQS loop = 15, cmp_err_1 = ffff0000
- dqs_perbyte_dly.last_dqsdly_pass[0]=15, finish count=1
- dqs_perbyte_dly.last_dqsdly_pass[1]=15, finish count=2
- DQ loop=15, cmp_err_1 = ffff0000
- dqs_perbyte_dly.last_dqdly_pass[0]=15, finish count=1
- dqs_perbyte_dly.last_dqdly_pass[1]=15, finish count=2
- byte:0, (DQS,DQ)=(8,8)
- byte:1, (DQS,DQ)=(8,8)
- DRAMC_DQODLY1[200]=88888888
- DRAMC_DQODLY2[204]=88888888
- 20,data:88
- [EMI] DRAMC calibration passed
- ===================================================================
- MT7621 stage1 code done
- CPU=500000000 HZ BUS=166666666 HZ
- ===================================================================
- U-Boot 1.1.3 (Feb 7 2017 - 17:52:38)
- Board: Ralink APSoC DRAM: 128 MB
- relocate_code Pointer at: 87fb8000
- Config XHCI 40M PLL
- flash manufacture id: c2, device id 20 19
- find flash: MX25L25635E
- *** Warning - bad CRC, using default environment
- ============================================
- Ralink UBoot Version: 4.3.0.0
- --------------------------------------------
- ASIC MT7621A DualCore (MAC to MT7530 Mode)
- DRAM_CONF_FROM: Auto-Detection
- DRAM_TYPE: DDR3
- DRAM bus: 16 bit
- Xtal Mode=5 OCP Ratio=1/3
- Flash component: SPI Flash
- Date:Feb 7 2017 Time:17:52:38
- ============================================
- icache: sets:256, ways:4, linesz:32 ,total:32768
- dcache: sets:256, ways:4, linesz:32 ,total:32768
- ##### The CPU freq = 880 MHZ ####
- estimate memory size =128 Mbytes
- #Reset_MT7530
- Please choose the operation:
- 1: Load system code to SDRAM via TFTP.
- 2: Load system code then write to Flash via TFTP.
- 3: Boot system code via Flash (default).
- 4: Entr boot command line interface.
- 7: Load Boot Loader code then write to Flash via Serial.
- 9: Load Boot Loader code then write to Flash via TFTP.
- 4 3 2 1 0
- 3: System Boot system code via Flash[1st image].
- ## Booting image at bc050000 ...
- Skip checking image magic number
- Image Name:
- Image Type: MIPS Linux Kernel Image (lzma compressed)
- Data Size: 9745151 Bytes = 9.3 MB
- Load Address: 80001000
- Entry Point: 8000d210
- Verifying Checksum ... OK
- Uncompressing Kernel Image ... OK
- No initrd
- ## Transferring control to Linux (at address 8000d210) ...
- ## Giving linux memsize in MB, 128
- Starting kernel ...
- LINUX started...
- THIS IS ASIC
- Linux version 2.6.36 (root@pesi-xian) (gcc version 4.6.3 (Buildroot 2012.11.1) ) #1 SMP PREEMPT Tue Feb 7 17:52:21 CST 2017
- The CPU feqenuce set to 880 MHz
- GCMP present
- CPU revision is: 0001992f (MIPS 1004Kc)
- Software DMA cache coherency
- Determined physical RAM map:
- memory: 08000000 @ 00000000 (usable)
- Initrd not found or empty - disabling initrd
- Zone PFN ranges:
- Normal 0x00000000 -> 0x00008000
- Movable zone start PFN for each node
- early_node_map[1] active PFN ranges
- 0: 0x00000000 -> 0x00008000
- Detected 3 available secondary CPU(s)
- PERCPU: Embedded 7 pages/cpu @81103000 s7424 r8192 d13056 u65536
- pcpu-alloc: s7424 r8192 d13056 u65536 alloc=16*4096
- pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
- Kernel command line: console=ttyS1,57600n8 root=/dev/ram0 console=ttyS1,57600 root=/dev/ram0 rootfstype=squashfs,jffs2 isolcpus=1
- PID hash table entries: 512 (order: -1, 2048 bytes)
- Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- Primary instruction cache 32kB, VIPT, , 4-waylinesize 32 bytes.
- Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- Writing ErrCtl register=00009e60
- Readback ErrCtl register=00009e60
- Memory: 115724k/131072k available (4558k kernel code, 15348k reserved, 1583k data, 7564k init, 0k highmem)
- Hierarchical RCU implementation.
- Verbose stalled-CPUs detection is disabled.
- NR_IRQS:128
- Trying to install interrupt handler for IRQ24
- Trying to install interrupt handler for IRQ25
- Trying to install interrupt handler for IRQ22
- Trying to install interrupt handler for IRQ9
- Trying to install interrupt handler for IRQ10
- Trying to install interrupt handler for IRQ11
- Trying to install interrupt handler for IRQ12
- Trying to install interrupt handler for IRQ13
- Trying to install interrupt handler for IRQ14
- Trying to install interrupt handler for IRQ16
- Trying to install interrupt handler for IRQ17
- Trying to install interrupt handler for IRQ18
- Trying to install interrupt handler for IRQ19
- Trying to install interrupt handler for IRQ20
- Trying to install interrupt handler for IRQ21
- Trying to install interrupt handler for IRQ23
- Trying to install interrupt handler for IRQ26
- Trying to install interrupt handler for IRQ27
- Trying to install interrupt handler for IRQ28
- Trying to install interrupt handler for IRQ15
- Trying to install interrupt handler for IRQ8
- Trying to install interrupt handler for IRQ29
- Trying to install interrupt handler for IRQ30
- Trying to install interrupt handler for IRQ31
- console [ttyS1] enabled
- Calibrating delay loop... 575.48 BogoMIPS (lpj=1150976)
- pid_max: default: 32768 minimum: 301
- Mount-cache hash table entries: 512
- launch: starting cpu1
- launch: cpu1 gone!
- CPU revision is: 0001992f (MIPS 1004Kc)
- Primary instruction cache 32kB, VIPT, , 4-waylinesize 32 bytes.
- Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- launch: starting cpu2
- launch: cpu2 gone!
- CPU revision is: 0001992f (MIPS 1004Kc)
- Primary instruction cache 32kB, VIPT, , 4-waylinesize 32 bytes.
- Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- launch: starting cpu3
- launch: cpu3 gone!
- CPU revision is: 0001992f (MIPS 1004Kc)
- Primary instruction cache 32kB, VIPT, , 4-waylinesize 32 bytes.
- Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- Brought up 4 CPUs
- Synchronize counters across 4 CPUs: done.
- NET: Registered protocol family 16
- release PCIe RST: RALINK_RSTCTRL = 7000000
- PCIE PHY initialize
- ***** Xtal 40MHz *****
- start MT7621 PCIe register access
- RALINK_RSTCTRL = 7000000
- RALINK_CLKCFG1 = 77ffeff8
- *************** MT7621 PCIe RC mode *************
- PCIE2 no card, disable it(RST&CLK)
- pcie_link status = 0x3
- RALINK_RSTCTRL= 3000000
- *** Configure Device number setting of Virtual PCI-PCI bridge ***
- RALINK_PCI_PCICFG_ADDR = 21007f2 -> 21007f2
- PCIE0 enabled
- PCIE1 enabled
- interrupt enable status: 300000
- Port 1 N_FTS = 1b105000
- Port 0 N_FTS = 1b105000
- config reg done
- init_rt2880pci done
- bio: create slab <bio-0> at 0
- vgaarb: loaded
- SCSI subsystem initialized
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- pci 0000:00:00.0: BAR 0: can't assign mem (size 0x80000000)
- pci 0000:00:01.0: BAR 0: can't assign mem (size 0x80000000)
- pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
- pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
- pci 0000:00:01.0: BAR 9: assigned [mem 0x60200000-0x602fffff pref]
- pci 0000:00:00.0: BAR 1: assigned [mem 0x60300000-0x6030ffff]
- pci 0000:00:00.0: BAR 1: set to [mem 0x60300000-0x6030ffff] (PCI address [0x60300000-0x6030ffff]
- pci 0000:00:01.0: BAR 1: assigned [mem 0x60310000-0x6031ffff]
- pci 0000:00:01.0: BAR 1: set to [mem 0x60310000-0x6031ffff] (PCI address [0x60310000-0x6031ffff]
- pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff]
- pci 0000:01:00.0: BAR 0: set to [mem 0x60000000-0x600fffff] (PCI address [0x60000000-0x600fffff]
- pci 0000:00:00.0: PCI bridge to [bus 01-01]
- pci 0000:00:00.0: bridge window [io disabled]
- pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
- pci 0000:00:00.0: bridge window [mem pref disabled]
- pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
- pci 0000:02:00.0: BAR 0: set to [mem 0x60100000-0x601fffff 64bit] (PCI address [0x60100000-0x601fffff]
- pci 0000:02:00.0: BAR 6: assigned [mem 0x60200000-0x6020ffff pref]
- pci 0000:00:01.0: PCI bridge to [bus 02-02]
- pci 0000:00:01.0: bridge window [io disabled]
- pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
- pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff pref]
- PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
- PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
- BAR0 at slot 0 = 0
- bus=0x0, slot = 0x0
- res[0]->start = 0
- res[0]->end = 0
- res[1]->start = 60300000
- res[1]->end = 6030ffff
- res[2]->start = 0
- res[2]->end = 0
- res[3]->start = 0
- res[3]->end = 0
- res[4]->start = 0
- res[4]->end = 0
- res[5]->start = 0
- res[5]->end = 0
- BAR0 at slot 1 = 0
- bus=0x0, slot = 0x1
- res[0]->start = 0
- res[0]->end = 0
- res[1]->start = 60310000
- res[1]->end = 6031ffff
- res[2]->start = 0
- res[2]->end = 0
- res[3]->start = 0
- res[3]->end = 0
- res[4]->start = 0
- res[4]->end = 0
- res[5]->start = 0
- res[5]->end = 0
- bus=0x1, slot = 0x0, irq=0x4
- res[0]->start = 60000000
- res[0]->end = 600fffff
- res[1]->start = 0
- res[1]->end = 0
- res[2]->start = 0
- res[2]->end = 0
- res[3]->start = 0
- res[3]->end = 0
- res[4]->start = 0
- res[4]->end = 0
- res[5]->start = 0
- res[5]->end = 0
- bus=0x2, slot = 0x1, irq=0x18
- res[0]->start = 60100000
- res[0]->end = 601fffff
- res[1]->start = 0
- res[1]->end = 0
- res[2]->start = 0
- res[2]->end = 0
- res[3]->start = 0
- res[3]->end = 0
- res[4]->start = 0
- res[4]->end = 0
- res[5]->start = 0
- res[5]->end = 0
- Switching to clocksource Ralink Systick timer
- usbcore: registered new interface driver huawei_ether
- NET: Registered protocol family 2
- IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
- TCP established hash table entries: 4096 (order: 3, 32768 bytes)
- TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
- TCP: Hash tables configured (established 4096 bind 4096)
- TCP reno registered
- UDP hash table entries: 128 (order: 0, 4096 bytes)
- UDP-Lite hash table entries: 128 (order: 0, 4096 bytes)
- NET: Registered protocol family 1
- 4 CPUs re-calibrate udelay(lpj = 1167360)
- Load Ralink Timer0 Module
- Load Ralink Timer1 Module
- Load Ralink Timer2 Module
- fuse init (API version 7.15)
- msgmni has been set to 226
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
- io scheduler noop registered (default)
- pcieport 0000:00:00.0: device [0e8d:0801] has invalid IRQ; check vendor BIOS
- pcieport 0000:00:01.0: device [0e8d:0801] has invalid IRQ; check vendor BIOS
- Ralink gpio driver initialized
- Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- serial8250: ttyS0 at MMIO 0x1e000d00 (irq = 27) is a 16550A
- serial8250: ttyS1 at MMIO 0x1e000c00 (irq = 26) is a 16550A
- brd: module loaded
- flash manufacture id: c2, device id 20 19
- MX25L25635E(c2 2019c220) (32768 Kbytes)
- mtd .name = raspi, .size = 0x02000000 (32M) .erasesize = 0x00010000 (64K) .numeraseregions = 0
- Creating 5 MTD partitions on "raspi":
- 0x000000000000-0x000002000000 : "ALL"
- 0x000000000000-0x000000020000 : "Bootloader"
- 0x000000020000-0x000000040000 : "Config"
- 0x000000040000-0x000000050000 : "Factory"
- 0x000000050000-0x000001000000 : "Kernel"
- rdm_major = 253
- GMAC1_MAC_ADRH -- : 0x00000006
- GMAC1_MAC_ADRL -- : 0xf4f5c550
- Ralink APSoC Ethernet Driver Initilization. v3.1 1024 rx/tx descriptors allocated, mtu = 1500!
- GMAC1_MAC_ADRH -- : 0x00000006
- GMAC1_MAC_ADRL -- : 0xf4f5c550
- PROC INIT OK!
- PPP generic driver version 2.4.2
- PPP Deflate Compression module registered
- PPP BSD Compression module registered
- PPP MPPE Compression module registered
- NET: Registered protocol family 24
- usbcore: registered new interface driver catc
- catc: v2.8:CATC EL1210A NetMate USB Ethernet driver
- usbcore: registered new interface driver asix
- usbcore: registered new interface driver ax88179_178a
- usbcore: registered new interface driver cdc_ether
- usbcore: registered new interface driver net1080
- usbcore: registered new interface driver cdc_subset
- usbcore: registered new interface driver zaurus
- register mt_drv
- === pAd = c0282000, size = 863968 ===
- <-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x
- <-- RTMPAllocAdapterBlock, Status=0
- pAd->CSRBaseAddress =0xc0180000, csr_addr=0xc0180000!
- device_id =0x7603
- RtmpChipOpsHook(507): Not support for HIF_MT yet!
- mt7603_init()-->
- mt_bcn_buf_init(224): Not support for HIF_MT yet!
- <--mt7603_init()
- FM_OUT value: u4FmOut = 0(0x00000000)
- FM_OUT value: u4FmOut = 0(0x00000000)
- FM_OUT value: u4FmOut = 0(0x00000000)
- FM_OUT value: u4FmOut = 0(0x00000000)
- FM_OUT value: u4FmOut = 0(0x00000000)
- FM_OUT value: u4FmOut = 0(0x00000000)
- FM_OUT value: u4FmOut = 0(0x00000000)
- FM_OUT value: u4FmOut = 0(0x00000000)
- FM_OUT value: u4FmOut = 0(0x00000000)
- FM_OUT value: u4FmOut = 0(0x00000000)
- FM_OUT value: u4FmOut = 0(0x00000000)
- FM_OUT value: u4FmOut = 0(0x00000000)
- FM_OUT value: u4FmOut = 0(0x00000000)
- FM_OUT value: u4FmOut = 0(0x00000000)
- FM_OUT value: u4FmOut = 0(0x00000000)
- FM_OUT value: u4FmOut = 0(0x00000000)
- FM_OUT value: u4FmOut = 0(0x00000000)
- FM_OUT value: u4FmOut = 0(0x00000000)
- FM_OUT value: u4FmOut = 0(0x00000000)
- FM_OUT value: u4FmOut = 0(0x00000000)
- xhc_mtk xhc_mtk: xHCI Host Controller
- xhc_mtk xhc_mtk: new USB bus registered, assigned bus number 1
- xhc_mtk xhc_mtk: irq 22, io mem 0x1e1c0000
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 2 ports detected
- xhc_mtk xhc_mtk: xHCI Host Controller
- xhc_mtk xhc_mtk: new USB bus registered, assigned bus number 2
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 1 port detected
- usbcore: registered new interface driver cdc_acm
- cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
- Initializing USB Mass Storage driver...
- usbcore: registered new interface driver usb-storage
- USB Mass Storage support registered.
- usbcore: registered new interface driver usbserial
- USB Serial support registered for generic
- usbcore: registered new interface driver usbserial_generic
- usbserial: USB Serial Driver core
- USB Serial support registered for GSM modem (1-port)
- usbcore: registered new interface driver option
- option: v0.7.2:USB Driver for GSM modems
- USB Serial support registered for pl2303
- usbcore: registered new interface driver pl2303
- pl2303: Prolific PL2303 USB to serial adaptor driver
- Ralink APSoC Hardware Watchdog Timer
- [CHIP_COMM] LINE:591: [client] socket send fail!
- DRV_RHPC: Detect Modem fail with 0x1, run startup status detection thread!!
- Platform Driver Remote Host Procedure Call init.
- Netfilter messages via NETLINK v0.30.
- [pbi]get NAT type fail!, use default:NAT_SYMMETRIC
- nf_conntrack version 0.5.0 (1808 buckets, 7232 max)
- ctnetlink v0.93: registering with nfnetlink.
- matchsize=264
- IPVS: Registered protocols ()
- IPVS: Connection hash table configured (size=4096, memory=32Kbytes)
- IPVS: ipvs loaded.
- GRE over IPv4 demultiplexor driver
- GRE over IPv4 tunneling driver
- nf_nat_rtsp v0.6.21 loading
- ip_tables: (C) 2000-2006 Netfilter Core Team, [pbi]get NAT type fail!, use default:NAT_SYMMETRIC
- Type=Linux
- TCP cubic registered
- NET: Registered protocol family 10
- lo: Disabled Privacy Extensions
- usb 2-1: new SuperSpeed USB device number 2 using xhc_mtk
- ip6_tables: (C) 2000-2006 Netfilter Core Team
- NET: Registered protocol family 17
- Bridge firewalling registered
- Ebtables v2.0 registered
- L2TP core driver, V2.0
- PPPoL2TP kernel driver, V2.0
- 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
- All bugs added by David S. Miller <davem@redhat.com>
- xhc_mtk xhc_mtk: WARN: short transfer on control ep
- xhc_mtk xhc_mtk: WARN: short transfer on control ep
- xhc_mtk xhc_mtk: WARN: short transfer on control ep
- xhc_mtk xhc_mtk: WARN: short transfer on control ep
- add_ep parameters, dev_speed 5, is_in 1, isTT 0, ep_type 3, maxp 16, interval 16, burst 0, mult 0, ep 0x85dbfc00, ep_ctx 0xa5dbc0c0, sch_ep 0x85dbfa00
- count_ss_bw, frame_idx 0, repeat 0, td_size 16, result bw 16
- Warning: unable to open an initial console.
- final best idx 0, best repeat 0
- [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
- [DBG] BOFFSET: 0, BREPEAT: 0
- Freeing unused kernel memory: 7564k freed
- add_ep parameters, dev_speed 5, is_in 1, isTT 0, ep_type 3, maxp 16, interval 16, burst 0, mult 0, ep 0x85dbfb80, ep_ctx 0xa5dbc140, sch_ep 0x85dbf980
- count_ss_bw, frame_idx 0, repeat 0, td_size 16, result bw 32
- final best idx 0, best repeat 0
- [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
- [DBG] BOFFSET: 0, BREPEAT: 0
- add_ep parameters, dev_speed 5, is_in 1, isTT 0, ep_type 3, maxp 16, interval 16, burst 0, mult 0, ep 0x85dbfb00, ep_ctx 0xa5dbc1c0, sch_ep 0x85dbf900
- count_ss_bw, frame_idx 0, repeat 0, td_size 16, result bw 48
- final best idx 0, best repeat 0
- [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
- [DBG] BOFFSET: 0, BREPEAT: 0
- add_ep parameters, dev_speed 5, is_in 1, isTT 0, ep_type 3, maxp 16, interval 16, burst 0, mult 0, ep 0x85dbfa80, ep_ctx 0xa5dbc240, sch_ep 0x85dbf880
- count_ss_bw, frame_idx 0, repeat 0, td_size 16, result bw 64
- final best idx 0, best repeat 0
- [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
- [DBG] BOFFSET: 0, BREPEAT: 0
- add_ep parameters, dev_speed 5, is_in 1, isTT 0, ep_type 2, maxp 1024, interval 1, burst 0, mult 0, ep 0x85c8b780, ep_ctx 0xa5dbc280, sch_ep 0x85dbf800
- [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
- [DBG] BOFFSET: 0, BREPEAT: 0
- add_ep parameters, dev_speed 5, is_in 0, isTT 0, ep_type 2, maxp 1024, interval 1, burst 0, mult 0, ep 0x85c8b7ac, ep_ctx 0xa5dbc160, sch_ep 0x85dbf780
- [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
- [DBG] BOFFSET: 0, BREPEAT: 0
- add_ep parameters, dev_speed 5, is_in 1, isTT 0, ep_type 2, maxp 1024, interval 1, burst 0, mult 0, ep 0x85c8b700, ep_ctx 0xa5dbc2c0, sch_ep 0x85dbf700
- [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
- [DBG] BOFFSET: 0, BREPEAT: 0
- add_ep parameters, dev_speed 5, is_in 0, isTT 0, ep_type 2, maxp 1024, interval 1, burst 0, mult 0, ep 0x85c8b72c, ep_ctx 0xa5dbc1a0, sch_ep 0x85dbf680
- [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
- [DBG] BOFFSET: 0, BREPEAT: 0
- add_ep parameters, dev_speed 5, is_in 1, isTT 0, ep_type 2, maxp 1024, interval 1, burst 0, mult 0, ep 0x85c8b680, ep_ctx 0xa5dbc300, sch_ep 0x85dbf600
- [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
- [DBG] BOFFSET: 0, BREPEAT: 0
- add_ep parameters, dev_speed 5, is_in 0, isTT 0, ep_type 2, maxp 1024, interval 1, burst 0, mult 0, ep 0x85c8b6ac, ep_ctx 0xa5dbc1e0, sch_ep 0x85dbf580
- [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
- [DBG] BOFFSET: 0, BREPEAT: 0
- add_ep parameters, dev_speed 5, is_in 1, isTT 0, ep_type 2, maxp 1024, interval 1, burst 0, mult 0, ep 0x85c8b600, ep_ctx 0xa5dbc340, sch_ep 0x85dbf500
- [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
- [DBG] BOFFSET: 0, BREPEAT: 0
- add_ep parameters, dev_speed 5, is_in 0, isTT 0, ep_type 2, maxp 1024, interval 1, burst 0, mult 0, ep 0x85c8b62c, ep_ctx 0xa5dbc220, sch_ep 0x85dbf480
- [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
- [DBG] BOFFSET: 0, BREPEAT: 0
- xhc_mtk xhc_mtk: WARN: short transfer on control ep
- add_ep parameters, dev_speed 5, is_in 1, isTT 0, ep_type 3, maxp 16, interval 16, burst 0, mult 0, ep 0x87d50580, ep_ctx 0xa5dbc0c0, sch_ep 0x85dbfa00
- count_ss_bw, frame_idx 0, repeat 0, td_size 16, result bw 64
- final best idx 0, best repeat 0
- [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
- [DBG] BOFFSET: 0, BREPEAT: 0
- add_ep parameters, dev_speed 5, is_in 1, isTT 0, ep_type 2, maxp 1024, interval 1, burst 0, mult 0, ep 0x87d505ac, ep_ctx 0xa5dbc080, sch_ep 0x85ecf480
- [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
- [DBG] BOFFSET: 0, BREPEAT: 0
- add_ep parameters, dev_speed 5, is_in 0, isTT 0, ep_type 2, maxp 1024, interval 1, burst 0, mult 0, ep 0x87d505d8, ep_ctx 0xa5dbc060, sch_ep 0x85ecf400
- [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
- [DBG] BOFFSET: 0, BREPEAT: 0
- xhc_mtk xhc_mtk: WARN: short transfer on control ep
- lxz device is Balong device bcdDevice=102, InterfaceSubClass=3
- xhc_mtk xhc_mtk: WARN: Stalled endpoint
- xhc_mtk xhc_mtk: WARN: short transfer on control ep
- add_ep parameters, dev_speed 5, is_in 1, isTT 0, ep_type 3, maxp 16, interval 16, burst 0, mult 0, ep 0x87d50680, ep_ctx 0xa5dbc140, sch_ep 0x85dbf980
- count_ss_bw, frame_idx 0, repeat 0, td_size 16, result bw 64
- final best idx 0, best repeat 0
- [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
- [DBG] BOFFSET: 0, BREPEAT: 0
- add_ep parameters, dev_speed 5, is_in 1, isTT 0, ep_type 2, maxp 1024, interval 1, burst 0, mult 0, ep 0x87d506ac, ep_ctx 0xa5dbc100, sch_ep 0x85f1b600
- [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
- [DBG] BOFFSET: 0, BREPEAT: 0
- add_ep parameters, dev_speed 5, is_in 0, isTT 0, ep_type 2, maxp 1024, interval 1, burst 0, mult 0, ep 0x87d506d8, ep_ctx 0xa5dbc0a0, sch_ep 0x85f1b580
- [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
- [DBG] BOFFSET: 0, BREPEAT: 0
- xhc_mtk xhc_mtk: WARN: short transfer on control ep
- lxz device is Balong device bcdDevice=102, InterfaceSubClass=3
- xhc_mtk xhc_mtk: WARN: Stalled endpoint
- xhc_mtk xhc_mtk: WARN: short transfer on control ep
- add_ep parameters, dev_speed 5, is_in 1, isTT 0, ep_type 3, maxp 16, interval 16, burst 0, mult 0, ep 0x87d50780, ep_ctx 0xa5dbc1c0, sch_ep 0x85dbf900
- count_ss_bw, frame_idx 0, repeat 0, td_size 16, result bw 64
- final best idx 0, best repeat 0
- [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
- [DBG] BOFFSET: 0, BREPEAT: 0
- add_ep parameters, dev_speed 5, is_in 1, isTT 0, ep_type 2, maxp 1024, interval 1, burst 0, mult 0, ep 0x87d507ac, ep_ctx 0xa5dbc180, sch_ep 0x85f1bc80
- [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
- [DBG] BOFFSET: 0, BREPEAT: 0
- add_ep parameters, dev_speed 5, is_in 0, isTT 0, ep_type 2, maxp 1024, interval 1, burst 0, mult 0, ep 0x87d507d8, ep_ctx 0xa5dbc0e0, sch_ep 0x85f1bc00
- [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
- [DBG] BOFFSET: 0, BREPEAT: 0
- xhc_mtk xhc_mtk: WARN: short transfer on control ep
- lxz device is Balong device bcdDevice=102, InterfaceSubClass=3
- xhc_mtk xhc_mtk: WARN: Stalled endpoint
- xhc_mtk xhc_mtk: WARN: short transfer on control ep
- add_ep parameters, dev_speed 5, is_in 1, isTT 0, ep_type 3, maxp 16, interval 16, burst 0, mult 0, ep 0x87d50880, ep_ctx 0xa5dbc240, sch_ep 0x85dbf880
- count_ss_bw, frame_idx 0, repeat 0, td_size 16, result bw 64
- final best idx 0, best repeat 0
- [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
- [DBG] BOFFSET: 0, BREPEAT: 0
- add_ep parameters, dev_speed 5, is_in 1, isTT 0, ep_type 2, maxp 1024, interval 1, burst 0, mult 0, ep 0x87d508ac, ep_ctx 0xa5dbc200, sch_ep 0x85dbf280
- [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
- [DBG] BOFFSET: 0, BREPEAT: 0
- add_ep parameters, dev_speed 5, is_in 0, isTT 0, ep_type 2, maxp 1024, interval 1, burst 0, mult 0, ep 0x87d508d8, ep_ctx 0xa5dbc120, sch_ep 0x85dbf200
- [DBG] BPKTS: 1, BCSCOUNT: 0, BBM: 1
- [DBG] BOFFSET: 0, BREPEAT: 0
- xhc_mtk xhc_mtk: WARN: short transfer on control ep
- lxz device is Balong device bcdDevice=102, InterfaceSubClass=3
- xhc_mtk xhc_mtk: WARN: Stalled endpoint
- fxz-hw_open: called
- option 2-1:1.4: GSM modem (1-port) converter detected
- usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0
- option 2-1:1.5: GSM modem (1-port) converter detected
- usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1
- option 2-1:1.6: GSM modem (1-port) converter detected
- usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2
- option 2-1:1.7: GSM modem (1-port) converter detected
- usb 2-1: GSM modem (1-port) converter now attached to ttyUSB3
- ADDRCONF(NETDEV_UP): usbcomm0: link is not ready
- ADDRCONF(NETDEV_CHANGE): usbcomm0: link becomes ready
- [CHIP_COMM] LINE:383: [server] begin receive message...
- Welcome to
- __ ___ _____ _____ _ _______ ______ _____ _ ___
- | \ / || ___|| __ \ | || __ ||__ __|| ___|| | / /
- | ^ || |__ | | \ \| || | | | | | | |__ | |/ /
- | | | || ___|| | | || || |__| | | | | ___|| \
- | | | || |___ | |__/ /| || __ | | | | |___ | |\ \
- |__| |___||_____||_____/ |_||_| |_| |_| |_____||_| \__\
- = Everyday Genius =
- ~~~~~~~~~~ restore customize config start ~~~~~~~~~~
- COUNT_ODMC=13
- COUNT_CSTM=13
- ~~~~~~~~~~ restore customize config end ~~~~~~~~~~
- [pbi] check config key....
- vm.panic_on_oom = 1
- kernel.panic = 10
- net.ipv4.conf.default.arp_ignore = 1
- net.ipv4.conf.all.arp_ignore = 1
- net.ipv4.icmp_echo_ignore_broadcasts = 1
- net.ipv4.icmp_ignore_bogus_error_responses = 1
- net.ipv4.tcp_tw_reuse = 1
- net.ipv4.tcp_tw_recycle = 0
- net.netfilter.nf_conntrack_checksum = 0
- net.netfilter.nf_conntrack_max = 16384
- net.netfilter.nf_conntrack_tcp_timeout_time_wait = 10
- net.ipv4.tcp_max_tw_buckets = 8192
- net.bridge.bridge-nf-call-arptables = 0
- net.bridge.bridge-nf-call-ip6tables = 0
- net.bridge.bridge-nf-call-iptables = 0
- net.core.rmem_max = 124928
- net.core.wmem_max = 124928
- net.ipv4.tcp_rmem = 4096 87380 186624
- net.ipv4.tcp_wmem = 4096 87380 186624
- net.ipv4.tcp_mem = 4374 5832 8748
- net.core.netdev_max_backlog = 1000
- Password for 'admin' changed
- Router hwver is 0x50400.
- Router hardware version read from modem at 1 time is 0x50400.
- 0: 6:FFFFFFF4:FFFFFFF5:FFFFFFC5:50
- Raeth v3.1 (Tasklet)
- phy_free_head is 0x5a82000!!!
- phy_free_tail_phy is 0x5a83ff0!!!
- txd_pool=a5a84000 phy_txd_pool=05A84000
- ei_local->skb_free start address is 0x87df24dc.
- free_txd: 05a84010, ei_local->cpu_ptr: 05A84000
- POOL HEAD_PTR | DMA_PTR | CPU_PTR
- ----------------+---------+--------
- 0xa5a84000 0x05A84000 0x05A84000
- phy_qrx_ring = 0x05a80000, qrx_ring = 0xa5a80000
- phy_rx_ring0 = 0x05a88000, rx_ring0 = 0xa5a88000
- MT7530 Reset Completed!!
- change HW-TRAP to 0x17ccf
- set LAN/WAN LLLLW
- GMAC1_MAC_ADRH -- : 0x00000006
- GMAC1_MAC_ADRL -- : 0xf4f5c550
- CDMA_CSG_CFG = 81000000
- GDMA1_FWD_CFG = 20710000
- @@@ create necessary device nodes for voIP
- net.ipv4.ip_forward = 0
- [pbi]upgd start
- [# image #] 1st image start ...
- ++++++rcS done++++++
- init: can't log to /dev/tty5
- starting pid 354, tty '/dev/ttyS1': '/bin/sh'
- get log dbg shm OK......
- get log dbg sem OK......
- BusyBox v1.12.1 (2017-02-07 17:32:19 CST) built-in shell (ash)
- Enter 'help' for a list of built-in commands.
- # device eth2.1 entered promiscuous mode
- device eth2 entered promiscuous mode
- device eth2.2 entered promiscuous mode
- register rt2860
- === pAd = c0882000, size = 1953080 ===
- <-- RTMPAllocTxRxRingMemory, Status=0
- <-- RTMPAllocAdapterBlock, Status=0
- pAd->CSRBaseAddress =0xc0780000, csr_addr=0xc0780000!
- device_id =0x7662
- ==>rlt_wlan_chip_onoff(): OnOff:1, Reset= 1, pAd->WlanFunCtrl:0x0, Reg-WlanFunCtrl=0x20a
- ====> mt76x2_ePA_per_rate_compensate_init: 5868 is_ePA: 1
- E2pAccessMode=2
- cfg_mode=14
- cfg_mode=14
- wmode_band_equal(): Band Not Equal!
- APSDCapable[0]=0
- APSDCapable[1]=0
- APSDCapable[2]=0
- APSDCapable[3]=0
- APSDCapable[4]=0
- APSDCapable[5]=0
- APSDCapable[6]=0
- APSDCapable[7]=0
- APSDCapable[8]=0
- APSDCapable[9]=0
- APSDCapable[10]=0
- APSDCapable[11]=0
- APSDCapable[12]=0
- APSDCapable[13]=0
- APSDCapable[14]=0
- APSDCapable[15]=0
- WiFi Mcast disabled=0
- RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5
- NVM is FLASH mode (pAd->flash_offset = 0x48000)
- get_dev_name_prefix(): dev_idx = 1, dev_name_prefix=rai
- brctl: bridge br0: Invalid argument
- brctl: iface ra1: No such device
- brctl: iface ra2: No such device
- brctl: iface ra3: No such device
- TX_BCN DESC a5d7d000 size = 320
- RX[0] DESC a5d7f000 size = 2048
- RX[1] DESC a5d80000 size = 2048
- E2pAccessMode=0
- cfg_mode=9
- cfg_mode=9
- wmode_band_equal(): Band Equal!
- FW Version:ap_pcie
- FW Build Date:20160107100755
- CmdAddressLenReq:(ret = 0)
- CmdFwStartReq: override = 1, address = 1048576
- CmdStartDLRsp: WiFI FW Download Success
- AsicDMASchedulerInit(): DMA Scheduler Mode=0(LMAC)
- efuse_probe: efuse = 10000002
- RtmpChipOpsEepromHook::e2p_type=2, inf_Type=5
- RtmpEepromGetDefault::e2p_dafault=1
- RtmpChipOpsEepromHook: E2P type(2), E2pAccessMode = 2, E2P default = 1
- NVM is FLASH mode, flash_offset = 0x40000
- 1. Phy Mode = 14
- @@@ NICReadEEPROMParameters : pAd->FWLoad=0
- Country Region from e2p = ffff
- tssi_1_target_pwr_g_band = 27
- 2. Phy Mode = 14
- 3. Phy Mode = 14
- NICInitPwrPinCfg(14): Not support for HIF_MT yet!
- NICInitializeAsic(584): Not support rtmp_mac_sys_reset () for HIF_MT yet!
- mt_mac_init()-->
- mt7603_init_mac_cr()-->
- AsicSetMacMaxLen(1826): Set the Max RxPktLen=1024!
- <--mt_mac_init()
- WTBL Segment 1 info:
- MemBaseAddr/FID:0x28000/0
- EntrySize/Cnt:32/128
- WTBL Segment 2 info:
- MemBaseAddr/FID:0x40000/0
- EntrySize/Cnt:64/128
- WTBL Segment 3 info:
- MemBaseAddr/FID:0x42000/64
- EntrySize/Cnt:64/128
- WTBL Segment 4 info:
- MemBaseAddr/FID:0x44000/128
- EntrySize/Cnt:32/128
- MtAsicACQueue: Write CR:21510, Value=10421
- MtAsicACQueue: Write CR:21500, Value=10421
- AntCfgInit(2567): Not support for HIF_MT yet!
- RTMPSetPhyMode(): channel out of range, use first ch=0
- MCS Set = ff ff 00 00 01
- AsicSetRalinkBurstMode(4148): Not support for HIF_MT yet!
- RTMPSetPiggyBack(876): Not support for HIF_MT yet!
- AsicSetTxPreamble(4135): Not support for HIF_MT yet!
- AsicAddSharedKeyEntry(1992): Not support for HIF_MT yet!
- AsicAddSharedKeyEntry(1992): Not support for HIF_MT yet!
- AsicAddSharedKeyEntry(1992): Not support for HIF_MT yet!
- AsicAddSharedKeyEntry(1992): Not support for HIF_MT yet!
- The 4-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 4
- AsicSetPreTbtt(): bss_idx=0, PreTBTT timeout = 0xa0
- Main bssid = 00:06:f4:f5:c5:51
- <==== rt28xx_init, Status=0
- @@@ ed_monitor_init : ===>
- @@@ ed_monitor_init : <===
- mt7603_set_ed_cca: TURN ON EDCCA mac 0x10618 = 0xd7c87d0f
- WiFi Startup Cost (ra0): 3.800s
- ==>Set_RadioOn_Proc (ON)
- device ra0 entered promiscuous mode
- brctl: bridge br0: Invalid argument
- brctl: iface rai1: No such device
- brctl: iface rai2: No such device
- brctl: iface rai3: No such device
- build time =
- 20141115060606a
- rom patch for E3 IC
- platform =
- ALPS
- FW Version:0.0.00 Build:1
- Build Time:201507311614____
- fw for E3 IC
- RX[0] DESC a5579000 size = 4096
- RX[1] DESC a557a000 size = 4096
- E2pAccessMode=2
- cfg_mode=14
- cfg_mode=14
- wmode_band_equal(): Band Not Equal!
- APSDCapable[0]=0
- APSDCapable[1]=0
- APSDCapable[2]=0
- APSDCapable[3]=0
- APSDCapable[4]=0
- APSDCapable[5]=0
- APSDCapable[6]=0
- APSDCapable[7]=0
- APSDCapable[8]=0
- APSDCapable[9]=0
- APSDCapable[10]=0
- APSDCapable[11]=0
- APSDCapable[12]=0
- APSDCapable[13]=0
- APSDCapable[14]=0
- APSDCapable[15]=0
- WiFi Mcast disabled=0
- 1. Phy Mode = 49
- get_chl_grp:illegal channel (167)
- get_chl_grp:illegal channel (167)
- get_chl_grp:illegal channel (169)
- get_chl_grp:illegal channel (169)
- get_chl_grp:illegal channel (171)
- get_chl_grp:illegal channel (171)
- drivers/net/wireless/rlt_wifi_ap/../rlt_wifi/chips/mt76x2.c:3028 assert (ad->TxPower[choffset].Channel == 42)failed
- Country Region from e2p = ffff
- mt76x2_read_temp_info_from_eeprom:: is_temp_tx_alc=0, temp_tx_alc_enable=0
- mt76x2_read_tx_alc_info_from_eeprom:: is_ePA_mode=0, ePA_type=3
- mt76x2_read_tx_alc_info_from_eeprom:: [5G band] high_temp_slope=0, low_temp_slope=0
- mt76x2_read_tx_alc_info_from_eeprom:: [2G band] high_temp_slope=0, low_temp_slope=0
- mt76x2_read_tx_alc_info_from_eeprom:: [5G band] tc_lower_bound=0, tc_upper_bound=0
- mt76x2_read_tx_alc_info_from_eeprom:: [2G band] tc_lower_bound=0, tc_upper_bound=0
- mt76x2_get_external_lna_gain::LNA type=0x11, BLNAGain=0x0, ALNAGain0=0x0, ALNAGain1=0x0, ALNAGain2=0x0
- 2. Phy Mode = 49
- 3. Phy Mode = 49
- andes_pci_fw_init
- 0x1300 = 00073200
- AntCfgInit: primary/secondary ant 0/1
- andes_load_cr:cr_type(2)
- ChipStructAssign(): MT76x2 hook !
- RTMPSetPhyMode: channel is out of range, use first channel=0
- MCS Set = ff ff 00 00 01
- TX0 power compensation = 0x38
- TX1 power compensation = 0x38
- mt76x2_bbp_adjust():rf_bw=2, ext_ch=1, PrimCh=60, HT-CentCh=62, VHT-CentCh=58
- APStartUp(): AP Set CentralFreq at 58(Prim=60, HT-CentCh=62, VHT-CentCh=58, BBP_BW=2)
- mt76x2_calibration(channel = 58)
- The 4-BSSID mode is enabled, the BSSID byte5 MUST be the multiple of 4
- ap_ftkd> Initialize FT KDP Module...
- Main bssid = 00:06:f4:f5:c5:52
- mt76x2_reinit_agc_gain:original agc_vga0 = 0x5c, agc_vga1 = 0x5c
- mt76x2_reinit_agc_gain:updated agc_vga0 = 0x5c, agc_vga1 = 0x5c
- mt76x2_reinit_hi_lna_gain:original hi_lna0 = 0x27, hi_lna1 = 0x27
- mt76x2_reinit_hi_lna_gain:updated hi_lna0 = 0x27, hi_lna1 = 0x27
- original vga value(chain0) = 5c
- original vga value(chain1) = 5c
- <==== rt28xx_init, Status=0
- get_dev_name_prefix(): dev_idx = 1, dev_name_prefix=rai
- get_dev_name_prefix(): dev_idx = 1, dev_name_prefix=rai
- get_dev_name_prefix(): dev_idx = 1, dev_name_prefix=rai
- RTMPDrvOpen(1):Check if PDMA is idle!
- RTMPDrvOpen(2):Check if PDMA is idle!
- device rai0 entered promiscuous mode
- br0: port 4(rai0) entering learning state
- br0: port 4(rai0) entering learning state
- br0: port 3(ra0) entering learning state
- br0: port 3(ra0) entering learning state
- br0: port 2(eth2.2) entering learning state
- br0: port 2(eth2.2) entering learning state
- br0: port 1(eth2.1) entering learning state
- br0: port 1(eth2.1) entering learning state
- dns_pesi.sh read nv start
- dns_pesi.sh read nv stop
- dns_pesi.sh rm start
- dns_pesi.sh rm stop
- dns_pesi.sh all stop
- [LAN_DBG]do update lan route config...
- [/sbin/allnetconfig.sh]data pdn disconnected
- [/sbin/allnetconfig.sh]voice pdn disconnected
- Stop Static Route ...
- net.ipv4.ip_forward = 1
- br0: port 4(rai0) entering forwarding state
- br0: port 3(ra0) entering forwarding state
- br0: port 2(eth2.2) entering forwarding state
- br0: port 1(eth2.1) entering forwarding state
- Start Static Route ...
- static route list =
- net.ipv4.ip_forward = 1
- conntrack v1.4.2 (conntrack-tools): 0 flow entries have been deleted.
- conntrack v1.4.2 (conntrack-tools): 0 flow entries have been deleted.
- Static Route restart ok
- Config system network route_update ok
- argument2 is null.
- killall: udhcpd: no process killed
- linkdown port 0
- Set: phy[0].reg[0] = 3900
- linkdown port 1
- Set: phy[1].reg[0] = 3900
- linkup port 0
- Set: phy[0].reg[0] = 3100
- linkup port 1
- Set: phy[1].reg[0] = 3100
- net.ipv6.conf.all.forwarding = 1
- hw_nat: module license 'Proprietary' taints kernel.
- Disabling lock debugging due to kernel taint
- Ralink HW NAT Module Enabled
- Interface doesn't accept private ioctl...
- set (8BE2): Invalid argument
- Interface doesn't accept private ioctl...
- set (8BE2): Invalid argument
- Interface doesn't accept private ioctl...
- set (8BE2): Invalid argument
- Interface doesn't accept private ioctl...
- set (8BE2): Invalid argument
- net.ipv4.tcp_syncookies = 0
- net.ipv4.tcp_max_syn_backlog = 128
- net.ipv4.tcp_syn_retries = 5
- net.ipv4.tcp_synack_retries = 5
- net.ipv4.tcp_syncookies = 0
- net.ipv4.tcp_max_syn_backlog = 128
- net.ipv4.tcp_syn_retries = 5
- net.ipv4.tcp_synack_retries = 5
- net.ipv4.netfilter.ip_conntrack_icmp_timeout = 30
- net.ipv4.netfilter.ip_conntrack_udp_timeout = 180
- net.ipv4.netfilter.ip_conntrack_tcp_timeout_established = 180
- Interface doesn't accept private ioctl...
- set (8BE2): Invalid argument
- Interface doesn't accept private ioctl...
- set (8BE2): Invalid argument
- Interface doesn't accept private ioctl...
- set (8BE2): Invalid argument
- Interface doesn't accept private ioctl...
- set (8BE2): Invalid argument
- conntrack v1.4.2 (conntrack-tools): connection tracking table has been emptied.
- TZCMD=<LST>-3
- [init] web syslog and klog init ... [SC] SIP Load Kernel Modules...
- [SC] sc_load_ko insert modules
- [SC] sc_load_modules insert modules(without ralink ko) ...
- osal_module.c:39 OSAL module_init OK
- lkm.c 178: devname /dev/d2vtspr
- /dev/d2vtspr registered successfuly @ 250.
- Enter _VHW_pcmOpen
- _VHW_pcmOpen exit
- _VHW_wdtTask is running
- switch register base addr to system register 0xbe000000
- write offset 0x2030, value 0x28000000
- write offset 0x2060, value 0x8181
- [SC] sc_load_modules insert modules done...
- Write correct !
- Channel 0: Revision Id 0xA2(0x18:0x2)
- _TIC_initHw 1007 - Read data in register 14: aa
- Si3217x: Channel 0 : Type = PROSLIC
- si3217x : Channel 0 : Type = 24
- si3217x : Channel 0 : Rev = 2
- Si3217x: loading patch: 06182014
- Si3217x: Channel 0 : VBAT Up = 58.375 v
- Si3217x: PCMStart
- _TIC_fxsSetLineState[1126]: REG30 = 11
- D2 Technologies, Inc.
- _ _ __
- / | '/ /_ _ /_ _ _ /_ _ ._ _
- /_.'/_ //_'/_ / // //_///_//_///_'_\
- _/
- Unified Communication Products
- www.d2tech.com
- +D2Tech+ VTSP_RT VPORT_R_1_6_91
- [SC] SIP start Client
- [SC] sc_gen_d2_xml generate d2 xml file
- ========
- vPort Release +D2Tech+ VPORT VPORT_R_1_6_91
- ========
- D2 Technologies
- _ _ __
- / | '/ /_ _ /_ _ _ /_ _ ._ _
- /_.'/_ //_'/_ / // //_///_//_///_'_\
- _/
- Unified Communication Products
- www.d2tech.com
- Key[uaname] is matched and stored
- Key[profilename] not matched - ignore line
- Key[enabledalllines] is matched and stored
- Key[lineenable0] is matched and stored
- Key[lineenable1] is matched and stored
- Key[srvprovidername] not matched - ignore line
- Key[authname0] is matched and stored
- Key[authname1] is matched and stored
- Key[authpass0] is matched and stored
- Key[authpass1] is matched and stored
- Key[dname00] is matched and stored
- Key[dname10] is matched and stored
- Key[obproxy] is matched and stored
- Key[obproxyport] is matched and stored
- Key[regtime] is matched and stored
- Key[regretry] is matched and stored
- Key[rtpportmin] is matched and stored
- Key[rtpportmax] is matched and stored
- Key[digitmapsm] is matched and stored
- Key[digitmaps] is matched and stored
- Key[sipdomain0] is matched and stored
- Key[sipdomain1] is matched and stored
- Key[sipluport] is matched and stored
- Key[sipproxy0] is matched and stored
- Key[sipproxyport0] is matched and stored
- Key[sipproxy1] is matched and stored
- Key[siprealm0] is matched and stored
- Key[siprealm1] is matched and stored
- Key[sipregis0] is matched and stored
- Key[sipregisport0] is matched and stored
- Key[sipregis1] is matched and stored
- Key[bkserverm] is matched and stored
- Key[sipbkdomain0] is matched and stored
- Key[sipbkproxy0] is matched and stored
- Key[sipbkproxyport0] is matched and stored
- Key[sipbkrealm0] is matched and stored
- Key[sipbkregis0] is matched and stored
- Key[sipbkregisport0] is matched and stored
- Key[bkobproxy] is matched and stored
- Key[bkobproxyport] is matched and stored
- Key[icem] is matched and stored
- Key[stunaddr] is matched and stored
- Key[stunm] is matched and stored
- Key[stunport] is matched and stored
- Key[uname00] is matched and stored
- Key[uname10] is matched and stored
- Key[useob] is matched and stored
- Key[sessiontimer] is matched and stored
- Key[useregevt] is matched and stored
- Key[p2pm0] is matched and stored
- Key[p2pm1] is matched and stored
- Key[subsm] is matched and stored
- Key[subsuri0] is matched and stored
- Key[subsuri1] is matched and stored
- Key[subsmsg0] is matched and stored
- Key[subsmsg1] is matched and stored
- Key[subtime] is matched and stored
- Key[nbtwconfenb0] is matched and stored
- Key[nbtwconfenb1] is matched and stored
- Key[conferenceuri0] is matched and stored
- Key[conferenceuri1] is matched and stored
- Key[mwienb0] not matched - ignore line
- Key[mwienb1] not matched - ignore line
- Key[sipdscpmark] is matched and stored
- Key[rtpdscpmark] is matched and stored
- Key[rport] is matched and stored
- Key[imei] is matched and stored
- Key[prate0] is matched and stored
- Key[prate1] is matched and stored
- Key[pratecn0] is matched and stored
- Key[pratecn1] is matched and stored
- Key[t38m0] is matched and stored
- Key[t38m1] is matched and stored
- Key[t711a] is matched and stored
- Key[t722] not matched - ignore line
- Key[t722p1] is matched and stored
- Key[t711p1u] not matched - ignore line
- Key[t711p1a] not matched - ignore line
- Key[tamrnbbr] not matched - ignore line
- Key[tamrnb] not matched - ignore line
- Key[t722p1br] is matched and stored
- Key[t723] is matched and stored
- Key[t723br] is matched and stored
- Key[t726] is matched and stored
- Key[t729] is matched and stored
- Key[tcn] is matched and stored
- Key[tdtmfr] is matched and stored
- Key[tpref00] is matched and stored
- Key[tpref01] is matched and stored
- Key[tpref02] is matched and stored
- Key[ttone] is matched and stored
- Key[vadm] is matched and stored
- Key[g771uenable] is matched and stored
- Key[actrans] is matched and stored
- Key[aifuri00] is matched and stored
- Key[aifuri01] is matched and stored
- Key[aifuri10] is matched and stored
- Key[aifuri11] is matched and stored
- Key[aituri00] is matched and stored
- Key[aituri01] is matched and stored
- Key[anocid] is matched and stored
- Key[aocid0] is matched and stored
- Key[bifuri00] is matched and stored
- Key[bifuri01] is matched and stored
- Key[bifuri10] is matched and stored
- Key[bifuri11] is matched and stored
- Key[bim0] is matched and stored
- Key[bim1] is matched and stored
- Key[bituri00] is matched and stored
- Key[bituri01] is matched and stored
- Key[bituri10] is matched and stored
- Key[bituri11] is matched and stored
- Key[bofuri00] is matched and stored
- Key[bofuri01] is matched and stored
- Key[bofuri10] is matched and stored
- Key[bofuri11] is matched and stored
- Key[bom0] is matched and stored
- Key[bom1] is matched and stored
- Key[boturi00] is matched and stored
- Key[boturi01] is matched and stored
- Key[boturi10] is matched and stored
- Key[boturi11] is matched and stored
- Key[cdndc] is matched and stored
- Key[cdnds] is matched and stored
- Key[cfduri0] is matched and stored
- Key[cfduri1] is matched and stored
- Key[cfm0] is matched and stored
- Key[cfm1] is matched and stored
- Key[cfring0] is matched and stored
- Key[cfring1] is matched and stored
- Key[cfwdunenb] is matched and stored
- Key[cfwdundisb] is matched and stored
- Key[cfwdbzenb] is matched and stored
- Key[cfwdbzdisb] is matched and stored
- Key[cfwdnoReplyenb] is matched and stored
- Key[cfwdnoReplydisb] is matched and stored
- Key[cnocid] is matched and stored
- Key[crets] is matched and stored
- Key[csfuri00] is matched and stored
- Key[csfuri10] is matched and stored
- Key[csm0] is matched and stored
- Key[ctrans] is matched and stored
- Key[dials01] is matched and stored
- Key[dials02] is matched and stored
- Key[dials03] is matched and stored
- Key[dials04] is matched and stored
- Key[dials05] is matched and stored
- Key[dials06] is matched and stored
- Key[dials07] is matched and stored
- Key[dials08] is matched and stored
- Key[dials09] is matched and stored
- Key[dials10] is matched and stored
- Key[dials11] is matched and stored
- Key[dials12] is matched and stored
- Key[dials13] is matched and stored
- Key[dials14] is matched and stored
- Key[dials15] is matched and stored
- Key[dials16] is matched and stored
- Key[drfuri00] is matched and stored
- Key[drfuri01] is matched and stored
- Key[drfuri10] is matched and stored
- Key[drfuri11] is matched and stored
- Key[drm0] is matched and stored
- Key[drm1] is matched and stored
- Key[drring00] is matched and stored
- Key[drring01] is matched and stored
- Key[drring10] is matched and stored
- Key[drring11] is matched and stored
- Key[drturi00] is matched and stored
- Key[drturi01] is matched and stored
- Key[drturi10] is matched and stored
- Key[drturi11] is matched and stored
- Key[rdials] is matched and stored
- Key[sfduri00] is matched and stored
- Key[sfduri01] is matched and stored
- Key[sfduri10] is matched and stored
- Key[sfduri11] is matched and stored
- Key[sffuri00] is matched and stored
- Key[sffuri01] is matched and stored
- Key[sffuri10] is matched and stored
- Key[sffuri11] is matched and stored
- Key[sfm0] is matched and stored
- Key[sfm1] is matched and stored
- Key[sfturi00] is matched and stored
- Key[sfturi01] is matched and stored
- Key[sfturi10] is matched and stored
- Key[sfturi11] is matched and stored
- Key[cwenable0] is matched and stored
- Key[cwenable1] is matched and stored
- Key[icdnd0] is matched and stored
- Key[icdnd1] is matched and stored
- Key[faxcngdctenable0] is matched and stored
- Key[faxcngdctenable1] is matched and stored
- Key[g711Afax] is matched and stored
- Key[g711Afaxtype] is matched and stored
- Key[hookfmax0] is matched and stored
- Key[hookfmax1] is matched and stored
- Key[hookfmin0] is matched and stored
- Key[hookfmin1] is matched and stored
- Key[hookrmin0] is matched and stored
- Key[hookrmin1] is matched and stored
- Key[ecenable] is matched and stored
- Key[ectail] is matched and stored
- Key[gaintx0] is matched and stored
- Key[gaintx1] is matched and stored
- Key[gainrx0] is matched and stored
- Key[gainrx1] is matched and stored
- Key[cidenable0] is matched and stored
- Key[cidfmt] is matched and stored
- Key[mgmtport] is matched and stored
- Key[prackm] is matched and stored
- Key[profile] is matched and stored
- Key[ring00] is matched and stored
- Key[ring10] is matched and stor+D2Tech+ VTSP_RT VPORT_R_1_6_91
- ed
- Key[scm0] is
- +D2Tech+
- matched and sto
- +D2Tech+
- red
- Key[scm1] i
- s matched and st+D2Tech+ comm trunk-comm src-svn: 4723 d2tools-svn: 4723
- ored
- Key[srtpm]
- is matched and +D2Tech+ dcrm trunk-dcrm src-svn: 4723 d2tools-svn: 4723
- stored
- Key[vmwi
- +D2Tech+
- ] is matched and
- +D2Tech+
- stored
- Key[war
- +D2Tech+
- mm0] is matched
- +D2Tech+
- and stored
- Key[
- +D2Tech+
- warmm1] is match
- ed and stored
- K+D2Tech+ tone M24KEC4_B_1_1-tone_1_2 src-svn: 225 d2tools-svn: 3454
- ey[warmt0] is ma
- +D2Tech+
- tched and stored
- +D2Tech+
- Key[warmt1] is
- +D2Tech+ uds trunk-uds src-svn: 4723 d2tools-svn: 4723
- matched and stored
- Key[warmuri0] is matched and stored
- Key[warmuri1] is matched and stored
- Key[rtptos] is matched and stored
- Key[rtcptos] is matched and stored
- Key[siptos] is matched and stored
- Key[startDigitTimer] is matched and stored
- Key[InterDigitTimerShort] is matched and stored
- Key[InterDigitTimerLong] is matched and stored
- Key[HaningReminderToneTimer] is matched and stored
- Key[BusyToneTimer] is matched and stored
- Key[NoAnswerTimer] is matched and stored
- Key[HeartBeatSwitch] is matched and stored
- Key[HeartBeatCycle] is matched and stored
- Key[HeartBeEnable GDMA Controller Module
- atCount] is matcGDMA IP Version=3
- hed and stored
- Key[diagState] is matched and stored
- Key[diagTestSvr] is matched and stored
- Key[fastdial] is matched and stored
- Key[CountryCode] is matched and stored
- Key[jbmax] is matched and stored
- Key[jbinit] is matched and stored
- vapp_init.c:643 - hostname_ptr=127.0.0.1
- vapp_init.c:683 VAPP hostname 127.0.0.1 ('127.0.0.1')
- vapp_init.c:685 VAPP hostname 127.0.0.1 (hbo 7f000001)
- _VAPP_initSetupSystem 802 - flashTmo = 5
- _VAPP_initSetupSystem 1043 - MGMT port = 10100
- Set reg status: Unregistered
- vapp_init.c 1540: dname00 not set, defaulting to uname '--sipdomain0'
- vapp_init.c 1659 - dtmfType = 0, coderEnable[VAPP_CODER_DTMF] = 0
- vapp_init.c 1707 - CountryCode = 7 JO
- vapp_init.c: 1775 UA 0 is configured with these params:
- Hostname: 127.0.0.1 (hbo 7f000001)
- HostAddr: 127.0.0.1
- Authname: ********
- Password: ********
- Domain:
- Realm: sip1.mada.jo
- Registrar: sip1.mada.jo
- Proxy : sip1.mada.jo
- Username[0]: ********
- Dname[0]: ********
- vapp_vtsp.c: VTSP_getVersion reports v1.4.0
- vapp_vtsp.c 448: _VAPP_vtspSetTone country code 7
- VAPP_mainControl: Connected to 7f000001:10100
- VAPP_mainControl: sent: vappdebug:1 on port:10100
- msg_ptr = vappdebug:1
- vapp_mgmt.c:1127, vAPP Debug Type = 1
- VAPP_mainControl: Connected to 7f000001:10100
- recv SIP evt 21
- event for infc0
- EVT-RELEASE MSTATE-RESET fc=0 cw= 0 r|d=0
- EVT-RESET SSTATE-IDLE TONE-OFF SMSG-REG cl=0 ac=0
- EVT-RESET SSTATE-IDLE TONE-OFF SMSG-REG cl=0 ac=0
- EVT-RESET SSTATE-BSYT TONE-SIL SMSG-BUSY cl=0 ac=0
- event for infc0
- EVT-RELEASE MSTATE-RELS fc=1 cw= 0 r|d=0
- EVT-XXXX SSTATE-IDLE TONE-OFF SMSG-NONE cl=0 ac=0
- EVT-XXXX SSTATE-IDLE TONE-OFF SMSG-NONE cl=0 ac=0
- EVT-XXXX Fatal!........ TONE-OFF SMSG-NONE cl=0 ac=0
- vapp_sip_fsm.c:1537 master state:1, prevstate:0, slave_0:6, slave_1:6, focus:1, evt:21
- Set call status: Idle
- VAPP_mainControl: sent: msg_ptr = sipdebug:0
- sipdebug:0 on port:10100SIP debug log type = 0
- vapp_mgmt.c:1113, SIP Debug Type = 0
- vapp dbg log 1, sip log 0
- pid 1514's current affinity mask: (null)
- pid 1514's new affinity mask: 2
- [SC] start vpp missing watchdog...
- [SC] deactivate sipclient
- [SC] sc_gen_d2_xml generate d2 xml file
- VAPP_mainControl: Connected to 7f000001:10100
- VHW: DSP suspend.
- fs.mqueue.msg_max = 32
- [CM]:pin save flag is 0, pin value is .
- [CM]:plmnListConfig:41601-41601 .
- [CM]:plmnListCustom:41601-41601 .
- [CM]:plmnList is same.[41601-41601 ]
- [CM]:[SN]:21510804308WG9008503.
- [CM]:Get SimLockKey success.
- [CM]:simlock strategy:UNLOCK ONCE.
- [CM]:SIMLOCK plmn list num:1.
- [CM]:[vpn]oper mode:1.
- killall: attest: no process killed
- set lcm_log_level:0
- Usage: ez-ipupdate [types] [usernmae] [password] [host] [Local IP]
- net.netfilter.nf_conntrack_h323_enable = 1
- net.netfilter.nf_conntrack_pptp_enable = 1
- nf_conntrack_rtsp v0.6.21 loading
- net.netfilter.nf_conntrack_rtsp_enable = 1
- net.netfilter.nf_conntrack_sip_enable = 0
- net.netfilter.nf_conntrack_sip_enable = 1
- vapp_mgmt.c:1053, vApp -r $IP: Reinitializing
- Re-init command received, IP=127.0.0.1
- Warm init VAPP
- vapp_init.c:1964 - VAPP WARM INIT
- vapp_init.c:563
- VAPP_mainControl: sent: reinit 127.0.0.1 on port:10100
- OSAL_netCloseSocket: Bad file descriptor
- OSAL_netCloseSocket: Bad file descriptor
- OSAL_netCloseSocket: Bad file descriptor
- rm: cannot remove '/var/net-snmp/snmpd.conf': No such file or directory
- killall: snmpd: no process killed
- SNMP username and passwd are NULL by default
- [SNMPD_INFO]snmpd run...
- [CM]:bind cm ctrl socket port 10008 ok.
- [CM]:cm ctrlcmcrtl_initSocket OK.
- [CM]:cm cmctrl_initThread OK.
- [CM]:socket channel ready.
- OSAL_netCloseSocket: Bad file descriptor
- OSAL_netCloseSocket: Bad file descriptor
- OSAL_netCloseSocket: Bad file descriptor
- Key[uaname] is matched and stored
- Key[profilename] not matched - ignore line
- Key[enabledalllines] is matched and stored
- Key[lineenable0] is matched and stored
- Key[lineenable1] is matched and stored
- Key[srvprovidername] not matched - ignore line
- Key[authname0] is matched and stored
- Key[authname1] is matched and stored
- Key[authpass0] is matched and stored
- Key[authpass1] is matched and stored
- Key[dname00] is matched and stored
- Key[dname10] is matched and stored
- Key[obproxy] is matched and stored
- Key[obproxyport] is matched and stored
- Key[regtime] is matched and stored
- Key[regretry] is matched and stored
- Key[rtpportmin] is matched and stored
- Key[rtpportmax] is matched and stored
- Key[digitmapsm] is matched and stored
- Key[digitmaps] is matched and stored
- Key[sipdomain0] is matched and stored
- Key[sipdomain1] is matched and stored
- Key[sipluport] is matched and stored
- Key[sipproxy0] is matched and stored
- Key[sipproxyport0] is matched and stored
- Key[sipproxy1] is matched and stored
- Key[siprealm0] is matched and stored
- Key[siprealm1] is matched and stored
- Key[sipregis0] is matched and stored
- Key[sipregisport0] is matched and stored
- Key[sipregis1] is matched and stored
- Key[bkserverm] is matched and stored
- Key[sipbkdomain0] is matched and stored
- Key[sipbkproxy0] is matched and stored
- Key[sipbkproxyport0] is matched and stored
- Key[sipbkrealm0] is matched and stored
- Key[sipbkregis0] is matched and stored
- Key[sipbkregisport0] is matched and stored
- Key[bkobproxy] is matched and stored
- Key[bkobproxyport] is matched and stored
- Key[icem] is matched and stored
- Key[stunaddr] is matched and stored
- Key[stunm] is matched and stored
- Key[stunport] is matched and stored
- Key[uname00] is matched and stored
- Key[uname10] is matched and stored
- Key[useob] is matched and stored
- Key[sessiontimer] is matched and stored
- Key[useregevt] is matched and stored
- Key[p2pm0] is matched and stored
- Key[p2pm1] is matched and stored
- Key[subsm] is matched and stored
- Key[subsuri0] is matched and stored
- Key[subsuri1] is matched and stored
- Key[subsmsg0] is matched and stored
- Key[subsmsg1] is matched and stored
- Key[subtime] is matched and stored
- Key[nbtwconfenb0] is matched and stored
- Key[nbtwconfenb1] is matched and stored
- Key[conferenceuri0] is matched and stored
- Key[conferenceuri1] is matched and stored
- Key[mwienb0] not matched - ignore line
- Key[mwienb1] not matched - ignore line
- Key[sipdscpmark] is matched and stored
- Key[rtpdscpmark] is matched and stored
- Key[rport] is matched and stored
- Key[imei] is matched and stored
- Key[prate0] is matched and stored
- Key[prate1] is matched and stored
- Key[pratecn0] is matched and stored
- Key[pratecn1] is matched and stored
- Key[t38m0] is matched and stored
- Key[t38m1] is matched and stored
- Key[t711a] is matched and stored
- Key[t722] not matched - ignore line
- Key[t722p1] is matched and stored
- Key[t711p1u] not matched - ignore line
- Key[t711p1a] not matched - ignore line
- Key[tamrnbbr] not matched - ignore line
- Key[tamrnb] not matched - ignore line
- Key[t722p1br] is matched and stored
- Key[t723] is matched and stored
- Key[t723br] is matched and stored
- Key[t726] is matched and stored
- Key[t729] is matched and stored
- Key[tcn] is matched and stored
- Key[tdtmfr] is matched and stored
- Key[tpref00] is matched and stored
- Key[tpref01] is matched and stored
- Key[tpref02] is matched and stored
- Key[ttone] is matched and stored
- Key[vadm] is matched and stored
- Key[g771uenable] is matched and stored
- Key[actrans] is matched and stored
- Key[aifuri00] is matched and stored
- Key[aifuri01] is matched and stored
- Key[aifuri10] is matched and stored
- Key[aifuri11] is matched and stored
- Key[aituri00] is matched and stored
- Key[aituri01] is matched and stored
- Key[anocid] is matched and stored
- Key[aocid0] is matched and stored
- Key[bifuri00] is matched and stored
- Key[bifuri01] is matched and stored
- Key[bifuri10] is matched and stored
- Key[bifuri11] is matched and stored
- Key[bim0] is matched and stored
- Key[bim1] is matched and stored
- Key[bituri00] is matched and stored
- Key[bituri01] is matched and stored
- Key[bituri10] is matched and stored
- Key[bituri11] is matched and stored
- Key[bofuri00] is matched and stored
- Key[bofuri01] is matched and stored
- Key[bofuri10] is matched and stored
- Key[bofuri11] is matched and stored
- Key[bom0] is matched and stored
- Key[bom1] is matched and stored
- Key[boturi00] is matched and stored
- Key[boturi01] is matched and stored
- Key[boturi10] is matched and stored
- Key[boturi11] is matched and stored
- Key[cdndc] is matched and stored
- Key[cdnds] is matched and stored
- Key[cfduri0] is matched and stored
- Key[cfduri1] is matched and stored
- Key[cfm0] is matched and stored
- Key[cfm1] is matched and stored
- webs: Listening for HTTP requests at address 192.168.1.1
- Key[cfring0] is matched and stored
- Key[cfring1] is matched and stored
- Key[cfwdunenb] is matched and stored
- Key[cfwdundisb] is matched and stored
- Key[cfwdbzenb] is matched and stored
- Key[cfwdbzdisb] is matched and stored
- Key[cfwdnoReplyenb] is matched and stored
- Key[cfwdnoReplydisb] is matched and stored
- Key[cnocid] is matched and stored
- Key[crets] is matched and stored
- Key[csfuri00] is matched and stored
- Key[csfuri10] is matched and stored
- enter formDefineSIP
- Key[csm0] is matched and stored
- Key[ctrans] is matched and stored
- Key[dials01] is matched and stored
- Key[dials02] is matched and stored
- Key[dials03] is matched and stored
- Key[dials04] is matched and stored
- Key[dials05] is matched and stored
- Key[dials06] is matched and stored
- Key[dials07] is matched and stored
- Key[dials08] is matched and stored
- Key[dials09] is matched and stored
- Key[dials10] is matched and stored
- Key[dials11] is matched and stored
- Key[dials12] is matched and stored
- Key[dials13] is matched and stored
- Key[dials14] is matched and stored
- [FW: V100R001C00SPC201, Build Time: Feb 7 2017 17:35:20, Up Time: 60]
- Key[dials15] is matched and stored
- Key[dials16] is matched and stored
- Key[drfuri00] is matched and stored
- Key[drfuri01] is matched and stored
- Key[drfuri10] is matched and stored
- Key[drfuri11] is matched and stored
- Key[drm0] is matched and stored
- Key[drm1] is matched and stored
- Key[drring00] is matched and stored
- Key[drring01] is matched and stored
- Key[drring10] is matched and stored
- Key[drring11] is matched and stored
- Key[drturi00] is matched and stored
- Key[drturi01] is matched and stored
- Key[drturi10] is matched and stored
- Key[drturi11] is matched and stored
- Key[rdials] is matched and stored
- Key[sfduri00] is matched and stored
- Key[sfduri01] is matched and stored
- Key[sfduri10] is matched and stored
- Key[sfduri11] is matched and stored
- Key[sffuri00] is matched and stored
- Key[sffuri01] is matched and stored
- Key[sffuri10] is matched and stored
- Key[sffuri11] is matched and stored
- Key[sfm0] is matched and stored
- Key[sfm1] is matched and stored
- Key[sfturi00] is matched and stored
- Key[sfturi01] is matched and stored
- Key[sfturi10] is matched and stored
- Key[sfturi11] is matched and stored
- Key[cwenable0] is matched and stored
- Key[cwenable1] is matched and stored
- Key[icdnd0] is matched and stored
- Key[icdnd1] is matched and stored
- Key[faxcngdctenable0] is matched and stored
- Key[faxcngdctenable1] is matched and stored
- Key[g711Afax] is matched and stored
- Key[g711Afaxtype] is matched and stored
- Key[hookfmax0] is matched and stored
- Key[hookfmax1] is matched and stored
- Key[hookfmin0] is matched and stored
- Key[hookfmin1] is matched and stored
- Key[hookrmin0] is matched and stored
- Key[hookrmin1] is matched and stored
- Key[ecenable] is matched and stored
- Key[ectail] is matched and stored
- Key[gaintx0] is matched and stored
- Key[gaintx1] is matched and stored
- Key[gainrx0] is matched and stored
- Key[gainrx1] is matched and stored
- Key[cidenable0] is matched and stored
- Key[cidfmt] is matched and stored
- Key[mgmtport] is matched and stored
- Key[prackm] is matched and stored
- Key[profile] is matched and stored
- Key[ring00] is matched and stored
- Key[ring10] is matched and stored
- Key[scm0] is matched and stored
- Key[scm1] is matched and stored
- Key[srtpm] is matched and stored
- Key[vmwi] is matched and stored
- Key[warmm0] is matched and stored
- Key[warmm1] is matched and stored
- [pbi] wait loading module....
- Key[warmt0] is matched and stored
- Key[warmt1] is matched and stored
- Key[warmuri0] is matched and stored
- Key[warmuri1] is matched and stored
- Key[rtptos] is matched and stored
- Key[rtcptos] is matched and stored
- Key[siptos] is matched and stored
- Key[startDigitTimer] is matched and stored
- Key[InterDigitTimerShort] is matched and stored
- Key[InterDigitTimerLong] is matched and stored
- Key[HaningReminderToneTimer] is matched and stored
- Key[BusyToneTimer] is matched and stored
- Key[NoAnswerTimer] is matched and stored
- Key[HeartBeatSwitch] is matched and stored
- Key[HeartBeatCycle] is matched and stored
- Key[HeartBeatCount] is matched and stored
- Key[diagState] is matched and stored
- Key[diagTestSvr] is matched and stored
- Key[fastdial] is matched and stored
- Key[CountryCode] is matched and stored
- Key[jbmax] is matched and stored
- Key[jbinit] is matched and stored
- vapp_init.c:643 - hostname_ptr=127.0.0.1
- vapp_init.c:683 VAPP hostname 127.0.0.1 ('127.0.0.1')
- vapp_init.c:685 VAPP hostname 127.0.0.1 (hbo 7f000001)
- _VAPP_initSetupSystem 802 - flashTmo = 5
- [pbi] start checking loaded module....
- vapp_init.c 1540: dname00 not set, defaulting to uname '--sipdomain0'
- vapp_init.c 1659 - dtmfType = 0, coderEnable[VAPP_CODER_DTMF] = 0
- vapp_init.c 1707 - CountryCode = 7 JO
- vapp_init.c: 1775 UA 0 is configured with these params:
- Hostname: 127.0.0.1 (hbo 7f000001)
- HostAddr: 127.0.0.1
- Authname: ********
- Password: ********
- Domain:
- Realm: sip1.mada.jo
- Registrar: sip1.mada.jo
- Proxy : sip1.mada.jo
- Username[0]: ********
- Dname[0]: ********
- VAPP_vtspSetTone set country code 7
- vapp_vtsp.c 448: _VAPP_vtspSetTone country code 7
- vapp_init.c:1996 - VAPP WARM INIT end
- sipclient pid=
- goahead pid=351
- dnsmasq pid=942
- cm pid=1637
- [pbi] checking loaded module OK.
- bserver ver 0.1
- Bind Status = 0
- Sock port 60000
- [bserver] ready to upgrade
- MtAsicACQueue: Write CR:21510, Value=10421
- MtAsicACQueue: Write CR:21500, Value=10421
- MtAsicACQueue: Write CR:21510, Value=10421
- MtAsicACQueue: Write CR:21500, Value=10421
- AP SETKEYS DONE - WPA2, AuthMode(7)=WPA2PSK, WepStatus(6)=AES, GroupWepStatus(4)=TKIP
- BA - Send ADDBA request. StartSeq = 3, FrameLen = 33. BufSize = 64
- get log dbg shm OK......
- get log dbg sem OK......
- [bserver] timeout reached
- conntrack v1.4.2 (conntrack-tools): 0 flow entries have been deleted.
- [bserver] done
- AsicAddSharedKeyEntry(1992): Not support for HIF_MT yet!
- AsicAddSharedKeyEntry(1992): Not support for HIF_MT yet!
- AsicAddSharedKeyEntry(1992): Not support for HIF_MT yet!
- AsicAddSharedKeyEntry(1992): Not support for HIF_MT yet!
- ESW: Link Status Changed - Port1 Link UP
- ```
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement