postprocesor plotter werkend

+================================================
+
+ Grbl - Vectric machine output configuration file
+
+================================================
+
+ History   https://jtechphotonics.com/Downloads/PostP/J_Tech_M106-M107_NoZ_MM_v4.pp
+
+ Who      When       What
+ ======== ========== ===========================
+ JTechP   03/28/2016 Added laser commands to
+                     every line.  Changed laser
+                     OFF command to both M03 S0 and
+                     M05.
+ PaulW    01/20/2016 turn Spindle off during rapids
+ EdwardP  11/02/2015 Written from Grbl_mm.pp but
+                     set G20
+ EdwardP  11/02/2015 Commented out arcs as these
+                     slow GRBL performance appear
+                     interpolated anyway
+ JayJ	   3/10/2017  Changed for 3D printer fan
+ 		      control of laser
+================================================

POST_NAME = "shapeoko lasercut (MM) (*.gcode)"
FILE_EXTENSION = "gcode"

UNITS = "MM"

+------------------------------------------------
+    Line terminating characters
+------------------------------------------------

LINE_ENDING = "[13][10]"

+------------------------------------------------
+    Block numbering
+------------------------------------------------

LINE_NUMBER_START     = 0
LINE_NUMBER_INCREMENT = 10
LINE_NUMBER_MAXIMUM = 999999

+================================================
+
+    Formating for variables
+
+================================================

VAR LINE_NUMBER = [N|A|N|1.0]
VAR SPINDLE_SPEED = [S|A|S|1.0]
VAR FEED_RATE = [F|C|F|1.1]
VAR X_POSITION = [X|C|X|1.4]
VAR Y_POSITION = [Y|C|Y|1.4]
VAR Z_POSITION = [Z|C|Z|1.4]
VAR ARC_CENTRE_I_INC_POSITION = [I|A|I|1.4]
VAR ARC_CENTRE_J_INC_POSITION = [J|A|J|1.4]
VAR X_HOME_POSITION = [XH|A|X|1.4]
VAR Y_HOME_POSITION = [YH|A|Y|1.4]
VAR Z_HOME_POSITION = [ZH|A|Z|1.4]

+================================================
+
+    Block definitions for toolpath output
+
+================================================

+---------------------------------------------------
+  Commands output at the start of the file
+---------------------------------------------------
begin HEADER

"M220 S100"
+ ; snelheid op 100% zetten je weet nooit hoe de printer ervoor stond
 "M117 Home x"
"G28 X"
+home x

"M117 Home y"
"G28 Y"
+home x

"T1M6"
"G17"
"G21"
"; starscript lASER UIT/pen op"
"M280 P0 S25"
"M1  S1; 1sec pauze"

+vith edit
"M75"
+start de klok op lcd

"M111 S247"
+logging aangezet
"M117 Vectric aspire"

"G90"
 + ;absolute positioning

"M82"
+ ;set extruder to absolute mode

 +einde vith edit

+---------------------------------------------------
+  Commands output for rapid moves
+---------------------------------------------------

begin RAPID_MOVE

+"G0 [X] [Y] [Z]"
"M400 ; elke G0 beweging afwechten ipv de door buffer te vliegen"
"G0 [X] [Y]; vithlaser rapidmove pen OP"

 "M280 P0 S25"
 "M1  S0.5; 0.5sec pauze"


+---------------------------------------------------
+  Commands output for the first feed rate move
+---------------------------------------------------

begin FIRST_FEED_MOVE

+"G1 [X] [Y] [Z] [F] ;vithlaser firstfeedmove"
"G1 [X] [Y]  [F] ;vithlaser firstfeedmove pen neer"

 "M280 P0 S147"
 "M1  S0.5; 0.5sec pauze"

+---------------------------------------------------
+  Commands output for feed rate moves
+---------------------------------------------------

begin FEED_MOVE

"G1 [X] [Y] [Z] ;vithlaser feedmove"


+---------------------------------------------------
+  Commands output for the first clockwise arc move
+---------------------------------------------------

begin FIRST_CW_ARC_MOVE

"G2 [X] [Y] [I] [J] [F]"


+---------------------------------------------------
+  Commands output for clockwise arc  move
+---------------------------------------------------

begin CW_ARC_MOVE

"G2 [X] [Y] [I] [J]"


+---------------------------------------------------
+  Commands output for the first counterclockwise arc move
+---------------------------------------------------

begin FIRST_CCW_ARC_MOVE

"G3 [X] [Y] [I] [J] [F]"


+---------------------------------------------------
+  Commands output for counterclockwise arc  move
+---------------------------------------------------

begin CCW_ARC_MOVE

"G3 [X] [Y] [I] [J]"


+---------------------------------------------------
+  Commands output at the end of the file
+---------------------------------------------------

begin FOOTER

";end script laser uit/op"
 "M280 P0 S25"
 "M1  S0.5; 0.5sec pauze"
"G0 [XH] [YH]"


"M300 S1 P500"
 "M400 ; volgende beweking volledig afwachten"
 "G4 P500 ; wait for 1/2 second"
"M300 S1 P500"
 "G4 P5000 ; wait for 1/2 second"
 "M117 ist frezen gelukt ?"
"M77"
+stop de klok op lcd