API tools faq
paste
Advertisement
Juffo-Wup

Untitled

Juffo-Wup
Mar 6th, 2022
132
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 7.65 KB | None | 0 0
raw download clone embed print report
  1. ypsi-c3845-1>show inv
  2. NAME: "3845", DESCR: "3845 chassis, Hw Serial#: FTX1250A0K1, Hw Revision: 1.0"
  3. PID: CISCO3845 , VID: V01 , SN: FTX1250A0K1
  4.  
  5. NAME: "c3845 Motherboard with Gigabit Ethernet on Slot 0", DESCR: "c3845 Motherboard with Gigabit Ethernet"
  6. PID: CISCO3845-MB , VID: V07 , SN: FOC12472TSG
  7.  
  8. NAME: "Two port T1 voice interface daughtercard with Drop and Insert on Slot 0 SubSlot 0", DESCR: "Two port T1 voice interface daughtercard with Drop and Insert"
  9. PID: VWIC-2MFT-T1-DI= , VID: 1.0, SN: 32909503
  10.  
  11. NAME: "Two port T1 voice interface daughtercard with Drop and Insert on Slot 0 SubSlot 1", DESCR: "Two port T1 voice interface daughtercard with Drop and Insert"
  12. PID: VWIC-2MFT-T1-DI= , VID: 1.0, SN: 30560327
  13.  
  14. NAME: "PVDMII DSP SIMM with four DSPs on Slot 0 SubSlot 4", DESCR: "PVDMII DSP SIMM with four DSPs"
  15. PID: PVDM2-64 , VID: V01 , SN: FOC10170482
  16.  
  17. NAME: "Digital Modem Carrier on Slot 1", DESCR: "Digital Modem Carrier"
  18. PID: NM-30DM= , VID: 0.2, SN: 26530783
  19.  
  20. NAME: "MICA-6DM Simm", DESCR: "MICA-6DM Simm"
  21. PID: MICA-6DM Simm , VID: 1.0, SN: 25476580
  22.  
  23. NAME: "MICA-6DM Simm", DESCR: "MICA-6DM Simm"
  24. PID: MICA-6DM Simm , VID: 1.0, SN: 24638921
  25.  
  26. NAME: "MICA-6DM Simm", DESCR: "MICA-6DM Simm"
  27. PID: MICA-6DM Simm , VID: 1.0, SN: 25476584
  28.  
  29. NAME: "MICA-6DM Simm", DESCR: "MICA-6DM Simm"
  30. PID: MICA-6DM Simm , VID: 1.0, SN: 24638914
  31.  
  32. NAME: "One Port Channelized E1/T1/PRI with Integrated CSU on Slot 2", DESCR: "One Port Channelized E1/T1/PRI with Integrated CSU"
  33. PID: NM-1CE1T1-PRI= , VID: 1.0, SN: FOC0925199J
  34.  
  35. NAME: "One Port Channelized E1/T1/PRI with Integrated CSU on Slot 3", DESCR: "One Port Channelized E1/T1/PRI with Integrated CSU"
  36. PID: NM-1CE1T1-PRI= , VID: 1.0, SN: FOC09203Z73
  37.  
  38. NAME: "Clear/Subrate T3/E3 WAN on Slot 4", DESCR: "Clear/Subrate T3/E3 WAN"
  39. PID: NM-1T3/E3= , VID: 1.0, SN: FOC09453U8W
  40.  
  41. ypsi-c3845-1>show modem
  42.  
  43. Codes:
  44. * - Modem has an active call
  45. R - Modem is being Reset
  46. D - Download in progress
  47. B - Modem is marked bad and cannot be used for taking calls
  48. b - Modem is either busied out or shut-down
  49.  
  50. Avg Hold Inc calls Out calls Busied Failed No Succ
  51. Mdm Time Succ Fail Succ Fail Out Dial Answer Pct.
  52. 1/0 00:00:35 1 2 0 0 0 0 0 33%
  53. 1/1 00:00:33 1 2 0 0 0 0 0 33%
  54. 1/2 00:00:26 1 2 0 0 0 0 0 33%
  55. 1/3 00:00:17 0 3 0 0 0 0 0 0%
  56. 1/4 00:00:27 0 3 0 0 0 0 0 0%
  57. 1/5 00:00:28 0 3 0 0 0 0 0 0%
  58. 1/6 00:00:17 0 3 0 0 0 0 0 0%
  59. 1/7 00:00:17 0 3 0 0 0 0 0 0%
  60. 1/8 00:00:18 0 3 0 0 0 0 0 0%
  61. 1/9 00:00:18 0 3 0 0 0 0 0 0%
  62. 1/10 05:18:21 1 2 0 0 0 0 0 33%
  63. 1/11 00:00:13 0 3 0 0 0 0 0 0%
  64. 1/12 00:00:18 0 3 0 0 0 0 0 0%
  65. 1/13 00:00:17 0 3 0 0 0 0 0 0%
  66. 1/14 00:00:17 0 3 0 0 0 0 0 0%
  67. 1/15 00:00:17 0 3 0 0 0 0 0 0%
  68. 1/16 00:00:15 1 2 0 0 0 0 0 33%
  69. 1/17 00:00:15 1 2 0 0 0 0 0 33%
  70. 1/18 00:00:18 0 3 0 0 0 0 0 0%
  71. 1/19 00:00:18 0 3 0 0 0 0 0 0%
  72. 1/20 00:00:17 0 3 0 0 0 0 0 0%
  73. 1/21 00:00:31 0 3 0 0 0 0 0 0%
  74. * 1/22 00:02:08 2 1 0 0 0 0 0 67%
  75. 1/23 00:01:20 1 1 0 0 0 0 0 50%
  76. Total: 00:13:53 9 62 0 0 0 0 0 12%
  77.  
  78. ypsi-c3845-1>show modem op 1/22
  79. Modem (1/22) Operational Status:
  80. Parameter #0 Disconnect Reason Info: (0x0)
  81. Type (=0 ): <unknown>
  82. Class (=0 ): Other
  83. Reason (=0 ): no disconnect has yet occurred
  84. Parameter #1 Connect Protocol: LAP-M
  85. Parameter #2 Compression: V.42bis both
  86. Parameter #3 EC Retransmission Count: 6
  87. Parameter #4 Self Test Error Count: 0
  88. Parameter #5 Call Timer: 289 secs
  89. Parameter #6 Total Retrains: 0
  90. Parameter #7 Sq Value: 3
  91. Parameter #8 Connected Standard: V.90
  92. Parameter #9 TX,RX Bit Rate: 50666, 28800
  93. Parameter #11 TX,RX Symbol Rate: 8000, 3200
  94. Parameter #13 TX,RX Carrier Frequency: 0, 1920
  95. Parameter #15 TX,RX Trellis Coding: 0, 16
  96. Parameter #16 TX,RX Preemphasis Index: 22, 0
  97. Parameter #17 TX,RX Constellation Shaping: Off, Off
  98. Parameter #18 TX,RX Nonlinear Encoding: Off, Off
  99. Parameter #19 TX,RX Precoding: Off, Off
  100. Parameter #20 TX,RX Xmit Level Reduction: 0, 1 dBm
  101. Parameter #21 Signal Noise Ratio: 38 dB
  102. Parameter #22 Receive Level: -20 dBm
  103. Parameter #23 Frequency Offset: 0.0 Hz
  104. Parameter #24 Phase Jitter Frequency: 0.0 Hz
  105. Parameter #25 Phase Jitter Level: 0 degrees
  106. Parameter #26 Far End Echo Level: -52 dBm
  107. Parameter #27 Phase Roll: 0.0 Hz
  108. Parameter #28 Round Trip Delay: 13 msecs
  109. Parameter #30 Characters transmitted, received: 16782, 124
  110. Parameter #32 General Portware Information: 22
  111. Parameter #33 PPP/SLIP packets transmitted, received: 0, 0
  112. Parameter #35 PPP/SLIP packets received (BAD/ABORTED): 0
  113. Parameter #36 EC packets transmitted, received OK: 267, 115
  114. Parameter #38 Moving Average of EC packets (Received BAD/ABORTED): 0
  115. Parameter #39 Robbed Bit Signalling (RBS) pattern: 0
  116. Parameter #40 Digital Pad: 6.0 dB, Digital Pad Compensation: Enabled
  117. Parameter #42 SS7/COT Status: 0
  118. Parameter #43 V110/PIAFS frames received bad: 0
  119. Parameter #44 V110/PIAFS frames received good: 0
  120. Parameter #45 V110/PIAFS frames transmitted: 0
  121. Parameter #46 V110/PIAFS sync lost: 0
  122. Parameter #93 PIAFS RTF: 0
  123. Parameter #120 Total Speedshifts: 3
  124. Parameter #108 Total MOH Time: 0 secs
  125. Parameter #109 Current MOH Time: 0 secs
  126. Parameter #105 MOH Status: Modem is Not on Hold
  127. Parameter #106 MOH Count: 0
  128. Parameter #107 MOH Request Count: 0
  129. Parameter #110 Retrains due to Call Waiting: 0
  130. Parameter #114 DC Encoder,Decoder State: stat not supported/stat not supported
  131. Parameter #115 DC TX,RX Compression Ratio: 1.0:1, 1.0:1
  132. Parameter #117 DC TX,RX Dictionary Reset Count: 0, 0
  133. Parameter #119 Diagnostic Code: 00 00 00 00 00 00 00 00
  134. Line Shape:
  135. ........................*
  136. ................................*
  137. .................................*
  138. .................................*
  139. ................................*
  140. .................................*
  141. .................................*
  142. .................................*
  143. .................................*
  144. .................................*
  145. .................................*
  146. .................................*
  147. .................................*
  148. .................................*
  149. .................................*
  150. .................................*
  151. ................................*
  152. ................................*
  153. ................................*
  154. ................................*
  155. ................................*
  156. ................................*
  157. ...............................*
  158. ............................*
  159. .......................*
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!