Near Homelessness Strategy

Near Homelessness Strategy




In the even rent gets raised, or there is conflict to which you thrown out you are to move with your aunt.

The extra $250 in rent will improve the odds that vehicle issues will be fixable.

Also this will shorten the certification time to less than 1 month, perhaps 2 can be gained in a month to 1 and a half months.

(This is if the octopharma plasma place isn't counted, the funds for certifications increases drastically if this is included creating the potential

to secure 2 very expensive certifications within the same month).

You have to keep close tabs on your doctors appointments and re-route your mail to your new address(Navy federal, Magic Hollow(inform them of move and provide store

and cell number, inform navy federal, and inform car-insurance).

Here are the neccessary items:

A large heavy duty military styled backpack.

A sleeping bag(heat insulated and water proof if possible).

Bring your barber clippers for grooming.

HDTV and labtop items are essential(If moving with aunt).


There are Visa Rush Cards with a one time fee(further money cannot be deposited in them they can be obtained from DG for $1 each)

for more info: https://www.rushcard.com/legal/cardholder-agreement


As always gentleness, politeness and aversion of conflict...

Remember if this manuever is made the plus will be certification time can drop significantly.

Other than the large heavy duty military styled backback.

A sleeping bag(heat insulated and water proof if possible.

Barber clippers.

HDTV and labtop.

It is important you attain "entertainment" to keep the mind.

An Xbox One + games.... (Remember xbox one doubles as a dvd player).

HDMI cable,


If the situation is precarious the following applies:

A list of nearby wifi(you can use video recorder to copy url's of youtube video's to keep but will not have freedom on hand unless traveling to that location).

The address of the nearest laudry mat(for clothes) to be visited once every week. A laundry clothes basket(always kept in the car).

A large heavy duty military styled backpack.

A sleeping bag(heat insulated and water proof if possible).

Obtain a Mylar Thermal Blanket(some where sold on ebay for $10 for a pack of 10)

Hygeine kit(kind of like a lunch back containing) a plastic bag with minature toothpaste,

minature tooth brush, minature aneseptic(Preferrably listerene{Doubles as a antifungal for foot fungus}).

One water bottle, one minature bottle of liquid body washing soap.

Baby wipes to cover these priority areas, (feet, face, groin, buttocks) and a disposal plastic bag).

A small pair of conair clippers to shave face and head(use fingers to feel all around head and scalp for loose hair if neccessary)

One two man tent(record 14 pitchable locations and rotate each one in order on each day of the week)(Fits inside of the large military styled backpack)..

MRE's(Meals ready to eat{In an unbroken package it can last for 5 years}) buy one box and take the main

meal, the candy/desert and the drink only and seperate them into ziploc bags for breakfast lunch and dinner.

Warning(the heater for the MRE's rely's on a chemical reaction that produces toxic fumes... Do NOT keep

it inside the tent!

Moxil(In case of root canal infections).

Exederin(In case a strong headache comes on).

A minature flashlight(that accepts tripple A batteries{Used as a light source at night in a designated area in the tent)

(along with a backup pack of tripple A batteries).

A $10 trac phone with a $20  120 minute 90 day service(from the dollar general).

Utilize planet fitness($10 a month membership) for showers and hygeine ensure at least a walk is done

on the treadmill for 5 minutes first.

A wireless charger goes for about $25 and can be used for to charge devices like a cell phone and labtop

(only two devices recommended).

Of course the bike with an added electric motor will be used.

2 blue jeans and 2 T shirts(black) will be the attire with 2 pair of socks and one pair of shoes.

In the winter time the mylar thermal blankets can be taped to the walls of the tent to insulate from the

cold and accumulate the bodyheat the body produces.

A large camping style pack to cover these items.

(Note: Obtain a canteen cup, a canteen and a mirror[for shaving and tooth brushing]



Ellipsis® Jetpack® MHS800L(It's a mobile hotspot from Verizon{i.e. wireless access point WAP): Costs about $150{it is recommended this is obtained long before

                                                                                               homelessness is on the horizon(if there is warning if not its ok).

                                                                                               The advantage here is that phone calls can be made using this wireless

                                                                                               service, the wireless service can be used for job applications, and in

                                                                                               addition(as long as there is a kind individual who doesn't mind you using

                                                                                               their address to direct the mail too(hint hint pay them) the ebay buy/sell

                                                                                               strategy until you are in a more prosperous position.


Combine this with a motorized or electric bicycle(That is obtained and stored dormant until this strategy needs to be in effect)








Motorized bikes can top out around 50 mph, the intent is to use it at 25 mph.

The motorized bike will increase the range of jobs to work for and make it easier to respond to

a call in on short notice(preferrably in regards to jobs a 5 mile radius and making the best efforts possible to avoid transits during rush hour).


Must know what your bike is 23", 26"(Size of bike tire can be found on a label on the rim)


A good mountain bike(costs about $130 from walmart).


A bike lock (est. $20)


A Bike cover(est.$20)


A Helmet is the required safety gear: At walmart for under $20.


A Bike Motor(again $100{Gas powered})  Look for: 48 49cc 50cc 2 Cycle 2-Stroke Engine Motor Kit for Motorized Bicycle Bike Black


A Bike Motor($190{electric powered}) Look for: New Motor Hub Electric Bicycle Rear Wheel Conversion Kit


Bike suit(Not required): http://www.leatherup.com/p/Mens-Xelement-Rain-Suits/Xelement-RN4760-Mens-2-Piece-Black-Motorcycle-Rain-Suit-with-Boot-Strap/209379.html?gclid=Cj0KEQiA5dK0BRCr49qDzILe74UBEiQA_6gA-vJFJc3yugFxTJgMaEKqSP2JAdJH8gP1dq5d4kzTsCwaAqpe8P8HAQ

Total: $300 If all new.

If the bike still works in shed. If the cheaper bike motor is selected the cost drops

to $110(If bike motors are still available at that price on ebay) expense can be

covered in 2 weeks of 2 in-week octapharma visits(Gas bike motor).

Gas bike motor expense(can be covered in 2 weeks of 2 in-week octapharma visits).

Electric bike motor expense(can be covered in 3 weeks of 3 in-week octapharma visits)[Partition spending of a budget of say $200 over a 4 week period[$50 per week)].

Add $60(Bike lock, cover, and motor) and this to either the gas motor or the electric bike motor to get the full expense.


When using Electric/gaspowered bike, only after every turn and stopping in a safe area will the phone gps be used.

Resume Portion(Welding):

Furqaan McCutcheon
 Address: 1407 Rams Horn way. Virginia Beach, VA.Phone:(757)-495-2206 Email: Quantimez@yahoo.com

TCC College 2012-2013

Lyon Shipyard February 2013-2016 Ending in December


          Professional Experience

Lyon Shipyard       1818 Brown Ave.            Norfolk, VA
Welder:
•  Regarding stick welding I have accomplished flat, horizontal , vertical and overhead with 3/8  inch square grooved beveled plate under a certified AWS welder instructor’s watchful eye.
• Whilst the joints  butt, corner, edge, lap and tee.
• Regarding 2 inch pipe I have successfully welded a smooth root and cover pass under another certified AWS welder(Instructor) observation.
• When it came to metal inert gas welding I have done the following metal thicknesses  1/8th, 1/4th, and 3/8ths, and performed welds in 1-4G with separate settings for both .035 and .045 wire thicknesses regarding voltage,  wirespeed(IPM),  gas flow, and arc control.
• Regarding fluxcore I have successfully done overhead beads on a T-joint for .045 wire.
• prepare work piece for a x-ray test, adjust to different settings
• I have 4 additional certifications; vertical and overhead groove butt joints for SMAW and Fluxcore and have pictures of them as proof that can be sent in email.

Welder experience : Lyon Shipyard 3 years

School experience(Tidewater Community College Portsmouth Campus)

Cover Letter for welding resume:


          Furqaan McCutcheon

Smaw.

Smaw/Tig Pipe,

Oxyfuel is almost non-existant and mig appears to be medium to low pay on average as from what I heard and researched

 it may be one of the easiest.

Tig often requiring skill, and pipe, often requiring skill are the higher paying ones.

Seeing that in school alone there are 5 electrodes to be familiar with, 6010-12, 7010, and 7024...

Couple that with all the postions with distinct movements to learn for each for an absolutely perfect weld bead.

Keep in mind the variables, metal type, amperage, electrode diameter, welding position, travel angle and work angles.

We already have elite notes as a guideline to serve as our "general purpose" approach to each position and each

electrode and amperage while not being razor specific in a way that makes all of it easy to remember and also allowing

us to pass with flying colors. Also in class we are by far not the worst welder by observation of the weld beads

produced. Also keep in mind we won't be able to go home and practice like in barbering so all that is gained

MUST be gained and mastered in school.

So our prioritization of focus should lay here, in pipe and tig to perform perfect weld beads in such...

There is a problem in that many test 1-4F and G with different metal thicknesses and such will take serious time. That's 8 workpieces

for each metal thickness. Totaling 32 workpieces. To cut that number down weld 2 positions per weld bead. Meaning half of the weld bead done in one position

and half of it done in another position.  This will total 16 work pieces.

The general purpose strategies will assist in doing well in all non pipe and tig jobs(keeping in mind pipe and tig are harder

to get).

Addition: A high aim is to secure a welding union job of $30-50/hr+,

In order to attain such a job we will use a "Rapid dominance in certifications" Prioritizing the most difficult certifications and working downward(to easier ones).

These logistics will greatly influence our ability to fund the dream job mission via schooling and any logistics of the inventive folder.



For job application process:


Rule of thumb for welding jobs(based on initial experience): 1 month for a response.

1 call out of 20 applications. (Similar to minimum wage 1:20 ratio) Only apply to

areas of current skill. The application will be 1 of 3 cities, Virginia Beach, Norfolk, and chesapeake.

This will be the initial manuever until a job is obtained.

If it is not the optimum tig pipe with the potential to make $21/hr(40k a year about) or starting out

at $20 an hour. While on job strategies and techniques are to be recorded for 3 months and applications(more specific to tig pipe)

are to be sent out beginning on the 2nd month).

This means you will be able to get jobs with high value, BUT, your marketability is minimized. This means quite a few

mig and fluxcore jobs are out there and combinations of most of these processes if not all.

Because the variable income warps your ability to make consistent logistical manuevers AND provide a decent margin of error,

this affects your prioritization (based on said earning), which

can imbalance your set approach(which was originally based off of $200 a week).

Though school can be finished with earning a minimum of $30 a week it is not ideal.

Attaining a higher set income would greatly increase the chances for mission accomplishment regarding the 3rd slot(elite training, choir mission, elite hacking etc.).


By default:

Use set recorded amperages for all processes(except for a Tig Pipe Test for Tig Pipe start high and then drop).

If by machine the amperage is different adjust higher or lower if neccessary.




1 Duffel Bag(Walmart $20),

2 SMAW glove pairs,

2 Tig Fingers,

2 10 Shade,

2 11 Shade,

1 Auto Darkening,

2 Welding Helmet,

2 safety glasses,

1 Chipping Hammer,

1 Wire Brush,

1 Vise Grip,

1 (Portwest Flame Resistant Work Welding Coverall Overall Boliersuit, ASTM NFPA {sold on ebay}
   and a welding jacket(tannish brown jacket at Airgas National Welders on Victory Blvd in Portsmouth),

1 respirator: Half Facepiece Medium, 6200/07025


The filter type for this respirator:  Particulate Filter P100

Half Facepiece Medium, 6200/07025

****The filter type for this respirator:

Particulate Filter P100

Maintenence: Once every 2 weeks, warm water(No hoter than 100 degrees),

Use dawn,

Rinse it off,

Let it hang dry,

Every day after you use it use cleaning pad plus rubbing alcohol.****


1 Pair of Steel toe boots that covers about 4 inches above the ankles,



Welder Tool List:




Items purchases from 3121 Victory Blvd, Portsmouth VA


"Lead" components for SMAW:

"Stinger": Radnor Electrode holder (A little under $30)

"Whip" (8ft welding Cable size 1 black flex 500' REEL [This is 2 ft above the 4-6ft length suggested(but not limited to that length) which was recommended by the gentleman behind the desk,

        Find out if a longer cable is needed from employer])

"Male connector"(to stinger): Due to many configurations of connectors, find out when at employer.


Look for pipefitters and welder helper jobs.

This will permit occasional hands on experience.



For job application process:


Rule of thumb for welding jobs(based on initial experience): 1 month for a response.

1 call out of 20 applications. (Similar to minimum wage 1:20 ratio) Only apply to

areas of current skill. The application will be 1 of 3 cities, Virginia Beach, Norfolk, and chesapeake.

This will be the initial manuever until a job is obtained.



By default:

Use set recorded amperages for all processes(except for a Tig Pipe Test for Tig Pipe start high and then drop).

If by machine the amperage is different adjust higher or lower if neccessary.


Protocol for when Hired(Ask for a copy of your W2 for that job and take a picture of it) and store it in the Vital folder and career folder.

Then aim to pay a tax proffessional to account for taxes for previous years(although you had no welding skills at age 19 this will account for any missed

taxes prompting the IRS to give you a break the year your on first then then pick a prior year(make sure those prior years are recorded). You can do 2 years

worth of taxes each year for 3 years but don't stress too much you where working minimum wage so it can't be much.



Here's the number for the recruiters:

7578735900

Recruiters for welding

quantimez@yahoo.com




Smaw: Weld stringers, 2 inch pipe 6G.

Tig: Weld stringers, 2 inch pipe 6G.

Mig: Weld stringers flat,6 inch pipe without a backing ring, 2 inch pipe 6G.

Fluxcore: Weld stringers 6 inch pipe without a backing ring, 2 inch pipe 6G.

Use the 2 position per bead approach to cut the number of neccessary workpieces down.






The last tasks are fluxcore setting for 1/8th plate, and restarts for square groove butt joints joint opening 1/16th this is expected to be done in 2 weeks.

Update notes for mig, when restarting beads after tacking restart on tack and when going through tacks a(if using a side to side motion) no side to side

motion until tack is passed.

With this new job assess available materials and processes for potential practice, fill in as many gaps as possible{.045 wire mig, .035 gas and core shielded fluxcore,

stainless steel, pipe,  aluminum, machine function learning, etc.} (perhaps an hour and 30 minutes off shift if permitted).

The adjustment for tacking open butt and/or bevel joints is to tack in the middle[Small so it does not cause much irregularity when the bead is created over it](to account for both mig and the higher heat of fluxcore),

Strategy for new welding job Other than what the boss teaches you and the actual work you do 1 hour and a half off clock to scientific method the things you don't know.

Make a note remembering to take no-offense to assumptions the media portray over a particular ethnicity or group of people.





* Purchase steel toe welding boots that goes quite higher than the ankle, welding overalls with a tan welding jacket to go overit(for extra protection if a large glob

  of super hot slag falls on you without you noticing also wear jeans under overalls(Individual at work recieved a serious burn on the genitals) Purchase a camopack

  and fill it with ice to avoid risking heat exhaustion with that wear Link: https://www.anypromo.com/getasample.aspx?productid=707839&utm_source=PLA&utm_medium=PC&utm_campaign=707839&g=1&gclid=CJ6K0PWLwckCFYlBfgodj4kCuw   .

  Camopack is to be worn under the tan welding jacket. The cost of tan welding jacket is around $100, the cost of the camot pack is around $30.


* Hightop steel toe boots $70.


Items Needed for Barbering Optimization:


1 Andis Fade Masters,($90 on ebay)


1 WAHL Clipper Guard Attachment ($10 or less on ebay)


Sharpening stone(Under $10 on ebay)


Styliner 2 blade ($17 on ebay)


Barbicide Disinfectant jar[under $15 on ebay],


$142 total.


Areas of Emphasis for Success:

Area of Emphasis for Barbering:

Immediately after haircutting skills and barbering maintenence(sanitation and procedures) is strong social skills and a strong sense of humor whilst

staying in the shop for 60 hours. This is more prominent than work ethic per say as in this is already a laidback job.

It is neccessary to be easy going to avoid personality clashes.

With the neccessary time period being 60 hours just for the work area(1 slot) this eliminates the careerist approach the specific 3 slot approach in which

1 slot is allocated 40 hours(work), 1 slot is allocated 10 hours(elite mission), and 1 slot is allocated 10 hours (elite mission) higher hours for relationship.

But again, this is still valued for the potential to gain above minimum wage but will be a certain challenge in combination with school.


Area of Emphasis for welding:

Safety and efficiency(high quality of output).

Though it has been heard of being able to produce alot this is perhaps more orientated toward Mig and Fluxcore in which it is different than moving fast in

fast food since these are two entirely different areas in which high speed in this case is analagous to continuous wire feed.


Safety and efficiency(high quality of output).

Though we have heard of being able to produce alot this is perhaps more orientated toward Mig and Fluxcore in which it is different than moving fast in

fast food since these are two entirely different areas in which high speed in this case is analagous to continuous wire feed.

General Emphasis:

General(default) emphasis for success is work ethic and proffessionalism.

Also the cap for R&R and ATR is 60 hours(Specific 3 slot approach and Carrerist approach).


Deterrents of inconveniences:


In regards to gum/tooth aches letting listerene sit(anti-fungal/anti-bacterial) and

using Anbesol with aid of cotton swabs assists with aches.

Anbesol can be purchased at walmart for around $7 (link below):

http://www.walmart.com/ip/Anbesol-Maximum-Strength-Adult-Oral-Pain-Reliever-.33-oz/10417155

Also listerene can be purchased at walmart for around $6 (link below):

http://www.walmart.com/search/?query=Listerine

In order to be thorough:



Purchase antibiotics online(This link does not require a doctor's prescription):    http://medsonline24-7.com/category/Antibiotics

Use Listerine in conjunction(let it sit on the infected area for 60 seconds[No swishing], then use a second cup of Listerine for 40 seconds[swishing is recommended]).

Use Anebesol from food-lion in the form with cotton swabs to apply(cotton balls are more wasteful).

Use 3 pills of Acetaminophen(pain killer) to ease the blood vessels and nerves in order for pain relief.

So antibiotics first, Listerine second, Anebesol third, and 3 pills of Acetaminophen fourth.


Resume for Minimum Wage:


Hello sir or ma'am,


 My name is Furqaan Saadali McCutcheon. I've worked at Mcdonalds from 2013-2016.

I have grilling experience in regards to seasoning, pressing, and evenly cooking 4oz-6oz meat.

Cleaning grills as well as assembling sandwhiches like mcdoubles, mcchickens and quarter

pounders. I take pride in my work and see myself as an outstanding individual. I come 15

early and don't leave until the job gets done.


Furqaan McCutcheon, Welder
Address: 1407 Rams Horn Way. Virginia Beach, Va
Phone:757-495-2206
Email: Quantimez@yahoo.com