Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ===================================================================
- MT7621 stage1 code 10:33:55 (ASIC)
- CPU=500000000 HZ BUS=166666666 HZ
- ==================================================================
- Change MPLL source from XTAL to CR...
- do MEMPLL setting..
- MEMPLL Config : 0x11000000
- 3PLL mode + External loopback
- === XTAL-40Mhz === DDR-1200Mhz ===
- PLL3 FB_DL: 0xd, 1/0 = 634/390 35000000
- PLL4 FB_DL: 0xd, 1/0 = 538/486 35000000
- PLL2 FB_DL: 0x10, 1/0 = 619/405 41000000
- do DDR setting..[01F40000]
- Apply DDR3 Setting...(use default AC)
- 0 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120
- --------------------------------------------------------------------------------
- 0000:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0001:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0002:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0003:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0004:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0005:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0006:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0007:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0008:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0009:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
- 000E:| 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1
- 000F:| 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0
- 0010:| 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
- 0011:| 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
- 0012:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0013:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0014:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0015:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0016:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0017:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0018:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0019:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001F:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- rank 0 coarse = 15
- rank 0 fine = 72
- B:| 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0
- opt_dle value:11
- DRAMC_R0DELDLY[018]=00001E1F
- ==================================================================
- RX DQS perbit delay software calibration
- ==================================================================
- 1.0-15 bit dq delay value
- ==================================================================
- bit| 0 1 2 3 4 5 6 7 8 9
- --------------------------------------
- 0 | 11 8 10 9 8 7 8 5 4 7
- 10 | 6 9 7 10 5 9
- --------------------------------------
- ==================================================================
- 2.dqs window
- x=pass dqs delay value (min~max)center
- y=0-7bit DQ of every group
- input delay:DQS0 =31 DQS1 = 30
- ==================================================================
- bit DQS0 bit DQS1
- 0 (1~62)31 8 (1~58)29
- 1 (1~60)30 9 (1~59)30
- 2 (1~60)30 10 (1~60)30
- 3 (0~60)30 11 (1~56)28
- 4 (1~58)29 12 (1~58)29
- 5 (1~62)31 13 (1~58)29
- 6 (1~60)30 14 (0~59)29
- 7 (1~62)31 15 (1~60)30
- ==================================================================
- 3.dq delay value last
- ==================================================================
- bit| 0 1 2 3 4 5 6 7 8 9
- --------------------------------------
- 0 | 11 9 11 10 10 7 9 5 5 7
- 10 | 6 11 8 11 6 9
- ==================================================================
- ==================================================================
- TX perbyte calibration
- ==================================================================
- DQS loop = 15, cmp_err_1 = ffff0000
- dqs_perbyte_dly.last_dqsdly_pass[0]=15, finish count=1
- dqs_perbyte_dly.last_dqsdly_pass[1]=15, finish count=2
- DQ loop=15, cmp_err_1 = ffff0080
- dqs_perbyte_dly.last_dqdly_pass[1]=15, finish count=1
- DQ loop=14, cmp_err_1 = ffff0000
- dqs_perbyte_dly.last_dqdly_pass[0]=14, finish count=2
- byte:0, (DQS,DQ)=(8,8)
- byte:1, (DQS,DQ)=(8,8)
- 20,data:88
- [EMI] DRAMC calibration passed
- ===================================================================
- MT7621 stage1 code done
- CPU=500000000 HZ BUS=166666666 HZ
- ===================================================================
- U-Boot 1.1.3 (Aug 11 2017 - 22:15:36)
- Board: Ralink APSoC DRAM: 128 MB
- relocate_code Pointer at: 87fb4000
- Config XHCI 40M PLL
- flash manufacture id: c2, device id 20 18
- find flash: MX25L12805D
- ============================================
- Ralink UBoot Version: 5.0.0.0
- --------------------------------------------
- ASIC MT7621A DualCore (MAC to MT7530 Mode)
- DRAM_CONF_FROM: Auto-Detection
- DRAM_TYPE: DDR3
- DRAM bus: 16 bit
- Xtal Mode=3 OCP Ratio=1/3
- Flash component: SPI Flash
- Date:Aug 11 2017 Time:22:15:36
- ============================================
- icache: sets:256, ways:4, linesz:32 ,total:32768
- dcache: sets:256, ways:4, linesz:32 ,total:32768
- ##### The CPU freq = 880 MHZ ####
- estimate memory size =128 Mbytes
- #Reset_MT7530
- set LAN/WAN WLLLL
- Please choose the operation:
- 1: Load system code to SDRAM via TFTP.
- 2: Load system code then write to Flash via TFTP.
- 3: Boot system code via Flash (default).
- 4: Entr boot command line interface.
- 7: Load Boot Loader code then write to Flash via Serial.
- 9: Load Boot Loader code then write to Flash via TFTP.
- You choosed 4
- 0
- 4: System Enter Boot Command Line Interface.
- U-Boot 1.1.3 (Aug 11 2017 - 22:15:36)
- MT7621 # help
- ? - alias for 'help'
- bootm - boot application image from memory
- cp - memory copy
- erase - erase SPI FLASH memory
- go - start application at address 'addr'
- help - print online help
- httpboot- entering the backup mode.
- loadb - load binary file over serial line (kermit mode)
- md - memory display
- mdio - Ralink PHY register R/W command !!
- mm - memory modify (auto-incrementing)
- nm - memory modify (constant address)
- printenv- print environment variables
- reset - Perform RESET of the CPU
- rf - read/write rf register
- saveenv - save environment variables to persistent storage
- setenv - set environment variables
- spi - spi command
- tftpboot- boot image via network using TFTP protocol
- version - print monitor version
- MT7621 #
- 0
- 3: System Boot system code via Flash.
- ## Booting image at bc050000 ...
- Image Name: MIPS OpenWrt Linux-3.10
- Image Type: MIPS Linux Kernel Image (lzma compressed)
- Data Size: 9043904 Bytes = 8.6 MB
- Load Address: 81001000
- Entry Point: 8143aab0
- Verifying Checksum ... OK
- Uncompressing Kernel Image ... OK
- No initrd
- ## Transferring control to Linux (at address 8143aab0) ...
- ## Giving linux memsize in MB, 128
- Starting kernel ...
- LINUX started...
- THIS IS ASIC
- SDK 5.0.S.0
- [ 0.000000] Linux version 3.10.14+ (eason@ubuntu) (gcc version 4.6.3 (Buildroot 2012.11.1) ) #5 SMP Mon May 7 23:30:21 CST 2018
- [ 0.000000]
- [ 0.000000] The CPU feqenuce set to 880 MHz
- [ 0.000000] GCMP present
- [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
- [ 0.000000] Software DMA cache coherency
- [ 0.000000] Determined physical RAM map:
- [ 0.000000] memory: 08000000 @ 00000000 (usable)
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x00000000-0x00ffffff]
- [ 0.000000] Normal [mem 0x01000000-0x07ffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00000000-0x07ffffff]
- [ 0.000000] Detected 3 available secondary CPU(s)
- [ 0.000000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
- [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 0.000000] PERCPU: Embedded 7 pages/cpu @816e7000 s6592 r8192 d13888 u32768
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
- [ 0.000000] Kernel command line: console=ttyS1,57600n8 root=/dev/mtdblock6 init=/etc/preinit
- [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
- [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.000000] Writing ErrCtl register=00008008
- [ 0.000000] Readback ErrCtl register=00008008
- [ 0.000000] Memory: 123780k/131072k available (4367k kernel code, 7292k reserved, 1213k data, 236k init, 0k highmem)
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:128
- [ 0.000000] console [ttyS1] enabled
- [ 0.120000] Calibrating delay loop... 577.53 BogoMIPS (lpj=1155072)
- [ 0.160000] pid_max: default: 32768 minimum: 301
- [ 0.164000] Mount-cache hash table entries: 512
- [ 0.168000] launch: starting cpu1
- [ 0.172000] launch: cpu1 gone!
- [ 0.172000] CPU1 revision is: 0001992f (MIPS 1004Kc)
- [ 0.172000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
- [ 0.172000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 0.172000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 0.204000] Synchronize counters for CPU 1: done.
- [ 0.212000] launch: starting cpu2
- [ 0.216000] launch: cpu2 gone!
- [ 0.216000] CPU2 revision is: 0001992f (MIPS 1004Kc)
- [ 0.216000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
- [ 0.216000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 0.216000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 0.248000] Synchronize counters for CPU 2: done.
- [ 0.256000] launch: starting cpu3
- [ 0.260000] launch: cpu3 gone!
- [ 0.260000] CPU3 revision is: 0001992f (MIPS 1004Kc)
- [ 0.260000] Primary instruction cache 32kB, 4-way, VIPT, linesize 32 bytes.
- [ 0.260000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 0.260000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 0.288000] Synchronize counters for CPU 3: done.
- [ 0.296000] Brought up 4 CPUs
- [ 0.300000] devtmpfs: initialized
- [ 0.304000] NET: Registered protocol family 16
- [ 0.604000] release PCIe RST: RALINK_RSTCTRL = 7000000
- [ 0.608000] PCIE PHY initialize
- [ 0.612000] ***** Xtal 40MHz *****
- [ 0.616000] start MT7621 PCIe register access
- [ 1.208000] RALINK_RSTCTRL = 7000000
- [ 1.212000] RALINK_CLKCFG1 = 77ffeff8
- [ 1.216000]
- [ 1.216000] *************** MT7621 PCIe RC mode *************
- [ 1.712000] PCIE2 no card, disable it(RST&CLK)
- [ 1.716000] pcie_link status = 0x3
- [ 1.720000] RALINK_RSTCTRL= 3000000
- [ 1.724000] *** Configure Device number setting of Virtual PCI-PCI bridge ***
- [ 1.728000] RALINK_PCI_PCICFG_ADDR = 21007f2 -> 21007f2
- [ 1.732000] PCIE0 enabled
- [ 1.736000] PCIE1 enabled
- [ 1.740000] interrupt enable status: 300000
- [ 1.744000] Port 1 N_FTS = 1b105000
- [ 1.748000] Port 0 N_FTS = 1b105000
- [ 1.752000] config reg done
- [ 1.756000] init_rt2880pci done
- [ 1.772000] bio: create slab <bio-0> at 0
- [ 1.776000] vgaarb: loaded
- [ 1.780000] SCSI subsystem initialized
- [ 1.788000] PCI host bridge to bus 0000:00
- [ 1.796000] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
- [ 1.808000] pci_bus 0000:00: root bus resource [io 0x1e160000-0x1e16ffff]
- [ 1.824000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
- [ 1.840000] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 1.856000] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- [ 1.872000] pci 0000:00:00.0: BAR 0: can't assign mem (size 0x80000000)
- [ 1.884000] pci 0000:00:01.0: BAR 0: can't assign mem (size 0x80000000)
- [ 1.900000] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
- [ 1.912000] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
- [ 1.924000] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
- [ 1.940000] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
- [ 1.952000] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
- [ 1.968000] pci 0000:00:00.0: PCI bridge to [bus 01]
- [ 1.976000] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
- [ 1.992000] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff 64bit]
- [ 2.004000] pci 0000:00:01.0: PCI bridge to [bus 02]
- [ 2.016000] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
- [ 2.028000] PCI: Enabling device 0000:00:00.0 (0004 -> 0006)
- [ 2.040000] PCI: Enabling device 0000:00:01.0 (0004 -> 0006)
- [ 2.052000] BAR0 at slot 0 = 0
- [ 2.056000] bus=0x0, slot = 0x0
- [ 2.064000] res[0]->start = 0
- [ 2.068000] res[0]->end = 0
- [ 2.076000] res[1]->start = 60200000
- [ 2.080000] res[1]->end = 6020ffff
- [ 2.088000] res[2]->start = 0
- [ 2.096000] res[2]->end = 0
- [ 2.100000] res[3]->start = 0
- [ 2.104000] res[3]->end = 0
- [ 2.112000] res[4]->start = 0
- [ 2.116000] res[4]->end = 0
- [ 2.124000] res[5]->start = 0
- [ 2.128000] res[5]->end = 0
- [ 2.132000] BAR0 at slot 1 = 0
- [ 2.140000] bus=0x0, slot = 0x1
- [ 2.148000] res[0]->start = 0
- [ 2.152000] res[0]->end = 0
- [ 2.156000] res[1]->start = 60210000
- [ 2.164000] res[1]->end = 6021ffff
- [ 2.172000] res[2]->start = 0
- [ 2.176000] res[2]->end = 0
- [ 2.184000] res[3]->start = 0
- [ 2.188000] res[3]->end = 0
- [ 2.196000] res[4]->start = 0
- [ 2.200000] res[4]->end = 0
- [ 2.204000] res[5]->start = 0
- [ 2.212000] res[5]->end = 0
- [ 2.216000] bus=0x1, slot = 0x0, irq=0x4
- [ 2.224000] res[0]->start = 60000000
- [ 2.232000] res[0]->end = 600fffff
- [ 2.240000] res[1]->start = 0
- [ 2.244000] res[1]->end = 0
- [ 2.252000] res[2]->start = 0
- [ 2.256000] res[2]->end = 0
- [ 2.260000] res[3]->start = 0
- [ 2.268000] res[3]->end = 0
- [ 2.272000] res[4]->start = 0
- [ 2.280000] res[4]->end = 0
- [ 2.284000] res[5]->start = 0
- [ 2.292000] res[5]->end = 0
- [ 2.296000] bus=0x2, slot = 0x1, irq=0x18
- [ 2.304000] res[0]->start = 60100000
- [ 2.312000] res[0]->end = 601fffff
- [ 2.316000] res[1]->start = 0
- [ 2.324000] res[1]->end = 0
- [ 2.328000] res[2]->start = 0
- [ 2.336000] res[2]->end = 0
- [ 2.340000] res[3]->start = 0
- [ 2.348000] res[3]->end = 0
- [ 2.352000] res[4]->start = 0
- [ 2.356000] res[4]->end = 0
- [ 2.364000] res[5]->start = 0
- [ 2.368000] res[5]->end = 0
- [ 2.376000] Switching to clocksource MIPS
- [ 2.384000] NET: Registered protocol family 2
- [ 2.392000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
- [ 2.408000] TCP bind hash table entries: 1024 (order: 1, 8192 bytes)
- [ 2.420000] TCP: Hash tables configured (established 1024 bind 1024)
- [ 2.432000] TCP: reno registered
- [ 2.440000] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 2.452000] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 2.464000] NET: Registered protocol family 1
- [ 2.472000] RPC: Registered named UNIX socket transport module.
- [ 2.484000] RPC: Registered udp transport module.
- [ 2.492000] RPC: Registered tcp transport module.
- [ 2.504000] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 2.604000] 4 CPUs re-calibrate udelay(lpj = 1167360)
- [ 2.616000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 2.628000] jffs2: version 2.2. (NAND) (ZLIB) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 2.648000] fuse init (API version 7.22)
- [ 2.656000] msgmni has been set to 241
- [ 2.664000] io scheduler noop registered (default)
- [ 2.676000] reg_int_mask=0, INT_MASK= 0
- [ 2.684000] HSDMA_init
- [ 2.688000]
- [ 2.688000] hsdma_phy_tx_ring0 = 0x00c00000, hsdma_tx_ring0 = 0xa0c00000
- [ 2.704000]
- [ 2.704000] hsdma_phy_rx_ring0 = 0x00c04000, hsdma_rx_ring0 = 0xa0c04000
- [ 2.720000] TX_CTX_IDX0 = 0
- [ 2.728000] TX_DTX_IDX0 = 0
- [ 2.732000] RX_CRX_IDX0 = 3ff
- [ 2.740000] RX_DRX_IDX0 = 0
- [ 2.744000] set_fe_HSDMA_glo_cfg
- [ 2.752000] HSDMA_GLO_CFG = 465
- [ 2.760000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
- [ 2.772000] serial8250: ttyS0 at MMIO 0x1e000d00 (irq = 27) is a 16550A
- [ 2.784000] serial8250: ttyS1 at MMIO 0x1e000c00 (irq = 26) is a 16550A
- [ 2.800000] Ralink gpio driver initialized
- [ 2.812000] brd: module loaded
- [ 2.820000] flash manufacture id: c2, device id 20 18
- [ 2.828000] MX25L12805D(c2 2018c220) (16384 Kbytes)
- [ 2.840000] mtd .name = raspi, .size = 0x01000000 (16M) .erasesize = 0x00010000 (64K) .numeraseregions = 0
- [ 2.860000] Creating 11 MTD partitions on "raspi":
- [ 2.868000] 0x000000000000-0x000001000000 : "ALL"
- [ 2.880000] 0x000000000000-0x000000030000 : "Bootloader"
- [ 2.892000] 0x000000030000-0x000000040000 : "Config"
- [ 2.900000] 0x000000040000-0x000000050000 : "Factory"
- [ 2.912000] 0x000000050000-0x000000b50000 : "firmware"
- [ 2.924000] 0x000000050000-0x000000250000 : "kernel"
- [ 2.932000] 0x000000250000-0x000000b50000 : "rootfs"
- [ 2.944000] 0x000000b50000-0x000000ed0000 : "tm_pattern"
- [ 2.956000] 0x000000ed0000-0x000000f50000 : "tm_key"
- [ 2.964000] 0x000000f50000-0x000000f80000 : "art_block"
- [ 2.976000] 0x000000f80000-0x000001000000 : "rootfs_data"
- [ 2.988000] PPP generic driver version 2.4.2
- [ 2.996000] PPP BSD Compression module registered
- [ 3.004000] PPP MPPE Compression module registered
- [ 3.016000] NET: Registered protocol family 24
- [ 3.024000] PPTP driver version 0.8.5
- [ 3.032000] rdm_major = 253
- [ 3.036000] GMAC1_MAC_ADRH -- : 0x0000bc5c
- [ 3.044000] GMAC1_MAC_ADRL -- : 0x4cbce007
- [ 3.052000] Ralink APSoC Ethernet Driver Initilization. v3.1 1024 rx/tx descriptors allocated, mtu = 1500!
- [ 3.072000] [LOG]|WIRE| LAN Starting
- [ 3.080000] GMAC1_MAC_ADRH -- : 0x0000bc5c
- [ 3.088000] GMAC1_MAC_ADRL -- : 0x4cbce007
- [ 3.096000] PROC INIT OK!
- [ 3.104000] nf_conntrack version 0.5.0 (1934 buckets, 7736 max)
- [ 3.116000] xt_time: kernel timezone is -0000
- [ 3.124000] gre: GRE over IPv4 demultiplexor driver
- [ 3.132000] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 3.144000] Type=Restricted Cone
- [ 3.148000] TCP: cubic registered
- [ 3.156000] NET: Registered protocol family 10
- [ 3.168000] sit: IPv6 over IPv4 tunneling driver
- [ 3.176000] NET: Registered protocol family 17
- [ 3.184000] Bridge firewalling registered
- [ 3.192000] Ebtables v2.0 registered
- [ 3.200000] l2tp_core: L2TP core driver, V2.0
- [ 3.208000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
- [ 3.220000] l2tp_netlink: L2TP netlink interface
- [ 3.228000] 8021q: 802.1Q VLAN Support v1.8
- [ 3.244000] VFS: Mounted root (squashfs filesystem) readonly on device 31:6.
- [ 3.264000] devtmpfs: mounted
- [ 3.268000] Freeing unused kernel memory: 236K (81575000 - 815b0000)
- - preinit -
- Press the [f] key and hit [enter] to enter failsafe mode
- - regular preinit -
- [ 7.472000] jffs2: notice: (119) jffs2_build_xattr_subsystem: complete building xattr subsystem, 1 of xdatum (0 unchecked, 0 orphan) and 24 of xref (0 dead, 16 orphan) found.
- switching to jffs2
- - init -
- Please press Enter to activate this console. [ 10.624000] ip_gre: GRE over IPv4 tunneling driver
- [ 10.692000] bonding: Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
- [ 11.008000] /proc/router_ip created
- [ 11.152000] nf_nat_amanda: Unknown symbol nf_nat_amanda_hook (err 0)
- [ 11.272000] Netfilter messages via NETLINK v0.30.
- [ 11.448000] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 11.556000] ctnetlink v0.93: registering with nfnetlink.
- [ 15.228000] #########>> ei_open 3378: -2014117888 call work scheduler FFFFFFBC:5C:4C:FFFFFFBC:FFFFFFE0: 7
- [ 15.248000] Raeth v3.1 (Tasklet)
- [ 15.260000] set CLK_CFG_0 = 0x40a00020!!!!!!!!!!!!!!!!!!1
- [ 15.272000] phy_free_head is 0xc08000!!!
- [ 15.280000] phy_free_tail_phy is 0xc09ff0!!!
- [ 15.292000] txd_pool=a0c10000 phy_txd_pool=00C10000
- [ 15.300000] ei_local->skb_free start address is 0x87f326dc.
- [ 15.312000] free_txd: 00c10010, ei_local->cpu_ptr: 00C10000
- [ 15.324000] POOL HEAD_PTR | DMA_PTR | CPU_PTR
- [ 15.332000] ----------------+---------+--------
- [ 15.340000] 0xa0c10000 0x00C10000 0x00C10000
- [ 15.348000]
- [ 15.348000] phy_qrx_ring = 0x00c0a000, qrx_ring = 0xa0c0a000
- [ 15.364000]
- [ 15.364000] phy_rx_ring0 = 0x00c0c000, rx_ring0 = 0xa0c0c000
- [ 15.400000] MT7530 Reset Completed!!
- [ 15.416000] change HW-TRAP to 0x117c8f
- [ 15.424000] set LAN/WAN WLLLL
- [ 15.432000] GMAC1_MAC_ADRH -- : 0x0000bc5c
- [ 15.444000] GMAC1_MAC_ADRL -- : 0x4cbce007
- [ 15.452000] GDMA2_MAC_ADRH -- : 0x0000bc5c
- [ 15.460000] GDMA2_MAC_ADRL -- : 0x4cbce008
- [ 15.468000] eth3: ===> VirtualIF_open
- [ 15.476000] MT7621 GE2 link rate to 1G
- [ 15.484000] CDMA_CSG_CFG = 81000000
- [ 15.488000] GDMA1_FWD_CFG = 20710000
- [ 15.496000] GDMA2_FWD_CFG = 20710000
- [ 15.504000] #########>> int_gpio_workqueue 3335: return 0[ 15.524000] eth3: ===> VirtualIF_open
- [ 16.624000] IPv6: ADDRCONF(NETDEV_UP): lo: link is not ready
- [ 16.636000] eth3: ===> VirtualIF_close
- [ 16.648000] IPv6: ADDRCONF(NETDEV_UP): eth3: link is not ready
- [ 16.668000] ra2880stop()...Done
- [ 16.672000] eth3: ===> VirtualIF_close
- [ 16.684000] Free TX/RX Ring Memory!
- [ 16.692000] IPv6: ADDRCONF(NETDEV_UP): eth2: link is not ready
- [ 16.704000] #########>> ei_open 3378: -2014117888 call work scheduler FFFFFFBC:5C:4C:FFFFFFBC:FFFFFFE0: 7
- [ 16.724000] Raeth v3.1 (Tasklet)
- [ 16.736000] set CLK_CFG_0 = 0x40a00020!!!!!!!!!!!!!!!!!!1
- [ 16.748000] phy_free_head is 0xc08000!!!
- [ 16.756000] phy_free_tail_phy is 0xc09ff0!!!
- [ 16.764000] txd_pool=a0c10000 phy_txd_pool=00C10000
- [ 16.776000] ei_local->skb_free start address is 0x87f326dc.
- [ 16.788000] free_txd: 00c10010, ei_local->cpu_ptr: 00C10000
- [ 16.796000] POOL HEAD_PTR | DMA_PTR | CPU_PTR
- [ 16.808000] ----------------+---------+--------
- [ 16.816000] 0xa0c10000 0x00C10000 0x00C10000
- [ 16.824000]
- [ 16.824000] phy_qrx_ring = 0x00c0a000, qrx_ring = 0xa0c0a000
- [ 16.840000]
- [ 16.840000] phy_rx_ring0 = 0x00c0c000, rx_ring0 = 0xa0c0c000
- [ 16.876000] MT7530 Reset Completed!!
- [ 16.892000] change HW-TRAP to 0x117c8f
- [ 16.900000] set LAN/WAN WLLLL
- [ 16.908000] GMAC1_MAC_ADRH -- : 0x0000bc5c
- [ 16.920000] GMAC1_MAC_ADRL -- : 0x4cbce007
- [ 16.928000] eth3: ===> VirtualIF_open
- [ 16.932000] MT7621 GE2 link rate to 1G
- [ 16.932000] CDMA_CSG_CFG = 81000000
- [ 16.932000] GDMA1_FWD_CFG = 20710000
- [ 16.932000] GDMA2_FWD_CFG = 20710000
- [ 16.964000] device eth2 entered promiscuous mode
- [ 16.976000] br-lan: port 1(eth2) entered forwarding state
- [ 16.988000] br-lan: port 1(eth2) entered forwarding state
- [ 17.004000] eth3: ===> VirtualIF_open
- [ 18.992000] br-lan: port 1(eth2) entered forwarding state
- [ 16.932000] #########>> int_gpio_workqueue 3335: return 0KERNEL_PANIC_COUNT=
- dnsmasq
- dnsmasq [br-lan]
- [ 26.596000] mt_wifi: module license 'Proprietary' taints kernel.
- [ 26.608000] Disabling lock debugging due to kernel taint
- [ 26.708000] register mt_drv
- [ 26.728000] pAd->PciHif.CSRBaseAddress =0xc1400000, csr_addr=0xc1400000!
- [ 26.740000] DriverOwn()::Try to Clear FW Own...
- [ 27.080000] DriverOwn()::Success to clear FW Own
- [ 27.092000] ChipOpsMCUHook
- [ 27.120000] pAd->PciHif.CSRBaseAddress =0xc1980000, csr_addr=0xc1980000!
- [ 27.132000] DriverOwn()::Try to Clear FW Own...
- [ 27.448000] DriverOwn()::Success to clear FW Own
- [ 27.456000] ChipOpsMCUHook
- UHTTP crt Checked
- main init
- main init
- page=[/setup/index.html]
- count=[43]
- page=[/setup/index.html]
- count=[43]
- ip6d.c[94] XXXXXXXXXXX Starting ip6d XXXXXXXXXXXX
- firewall.c[563] Start IPv6 Firewall
- firewall.c[831] flush_ip6tables
- route.c[33] Start IPv6 Static Routing
- wlan_wps.c:get_wifi_pin_code:132:ioctl error
- wlan_wps.c:get_wifi_pin_code:132:ioctl error
- ip6d.c[145] create IP6D_READY
- [ 34.360000] Ralink HW NAT Module Enabled
- [ 34.372000] eth2 ifindex =2
- [ 34.376000] eth3 ifindex =7
- [ 38.600000] jffs2: notice: (3127) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
- [ 39.680000] jffs2: notice: (3229) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
- [ 40.664000] DriverOwn()::Return since already in Driver Own...
- [ 40.676000] RT_CfgSetMacAddress : invalid length (0)
- [ 40.696000] default ApCliAPSDCapable[0]=0
- [ 40.704000] default ApCliAPSDCapable[1]=0
- [ 40.740000] [PMF]Set_PMFMFPC_Proc:: apidx=0, Desired MFPC=0
- [ 40.768000] AndesSendCmdMsg: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD
- [ 40.848000] AndesRestartCheck: Current TOP_MISC2(0x1)
- [ 40.872000] WfMcuHwInit: Before NICLoadFirmware, check IcapMode=0
- [ 40.884000] AndesRestartCheck: Current TOP_MISC2(0x1)
- start ddns
- [ 41.008000] WfMcuHwInit: NICLoadFirmware OK, Check IcapMode=0
- [ 41.020000] efuse_probe: efuse = 10000212
- [ 41.580000] mt7615_antenna_default_reset(): TxPath = 3, RxPath = 3
- [ 41.592000] mt7615_antenna_default_reset(): DBDC 2G TxPath = 1, 2G RxPath = 1
- [ 41.608000] mt7615_antenna_default_reset(): DBDC 5G TxPath = 1, 2G RxPath = 1
- [ 41.620000] RcRadioInit(): DbdcMode=0, ConcurrentBand=1
- [ 41.632000] RcRadioInit(): pRadioCtrl=8664d434,Band=0,rfcap=3,channel=1,PhyMode=2 extCha=0xf
- [ 41.656000] CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
- [ 41.672000] CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
- [ 41.684000] CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
- [ 41.696000] MT7615BBPInit():BBP Initialization.....
- [ 41.708000] Band 0: valid=1, isDBDC=0, Band=2, CBW=1, CentCh/PrimCh=1/1, prim_ch_idx=0, txStream=2
- [ 41.724000] Band 1: valid=0, isDBDC=0, Band=0, CBW=0, CentCh/PrimCh=0/0, prim_ch_idx=0, txStream=0
- [ 41.744000] MT7615BBPInit() todo
- [ 41.752000] mt7615_apply_dcoc() : reload Central CH [1] BW [0] from cetral freq [2417] offset [2200]
- [ 41.768000] mt7615_apply_dpd() : reload Central CH [1] BW [0] from cetral freq [2422] i[44] offset [4b20]
- [ 41.788000] MtCmdChannelSwitch: control_chl = 1,control_ch2=0, central_chl = 1 DBDCIdx= 0, Band= 0
- [ 41.808000] BW = 0,TXStream = 3, RXStream = 3, scan(1)
- [ 42.028000] mt7615_apply_dcoc() : reload Central CH [2] BW [0] from cetral freq [2417] offset [2200]
- [ 42.044000] mt7615_apply_dpd() : reload Central CH [2] BW [0] from cetral freq [2422] i[44] offset [4b20]
- [ 42.064000] MtCmdChannelSwitch: control_chl = 2,control_ch2=0, central_chl = 2 DBDCIdx= 0, Band= 0
- [ 42.084000] BW = 0,TXStream = 3, RXStream = 3, scan(1)
- [ 42.304000] mt7615_apply_dcoc() : reload Central CH [3] BW [0] from cetral freq [2417] offset [2200]
- [ 42.320000] mt7615_apply_dpd() : reload Central CH [3] BW [0] from cetral freq [2422] i[44] offset [4b20]
- [ 42.340000] MtCmdChannelSwitch: control_chl = 3,control_ch2=0, central_chl = 3 DBDCIdx= 0, Band= 0
- [ 42.360000] BW = 0,TXStream = 3, RXStream = 3, scan(1)
- [ 42.580000] mt7615_apply_dcoc() : reload Central CH [4] BW [0] from cetral freq [2432] offset [2300]
- [ 42.596000] mt7615_apply_dpd() : reload Central CH [4] BW [0] from cetral freq [2422] i[44] offset [4b20]
- [ 42.616000] MtCmdChannelSwitch: control_chl = 4,control_ch2=0, central_chl = 4 DBDCIdx= 0, Band= 0
- [ 42.636000] BW = 0,TXStream = 3, RXStream = 3, scan(1)
- [ 42.892000] mt7615_apply_dcoc() : reload Central CH [5] BW [0] from cetral freq [2432] offset [2300]
- [ 42.908000] mt7615_apply_dpd() : reload Central CH [5] BW [0] from cetral freq [2442] i[45] offset [4bf8]
- [ 42.928000] MtCmdChannelSwitch: control_chl = 5,control_ch2=0, central_chl = 5 DBDCIdx= 0, Band= 0
- [ 42.948000] BW = 0,TXStream = 3, RXStream = 3, scan(1)
- [ 43.168000] mt7615_apply_dcoc() : reload Central CH [6] BW [0] from cetral freq [2432] offset [2300]
- [ 43.184000] mt7615_apply_dpd() : reload Central CH [6] BW [0] from cetral freq [2442] i[45] offset [4bf8]
- [ 43.204000] MtCmdChannelSwitch: control_chl = 6,control_ch2=0, central_chl = 6 DBDCIdx= 0, Band= 0
- [ 43.224000] BW = 0,TXStream = 3, RXStream = 3, scan(1)
- [ 43.444000] mt7615_apply_dcoc() : reload Central CH [7] BW [0] from cetral freq [2447] offset [2400]
- [ 43.460000] mt7615_apply_dpd() : reload Central CH [7] BW [0] from cetral freq [2442] i[45] offset [4bf8]
- [ 43.480000] MtCmdChannelSwitch: control_chl = 7,control_ch2=0, central_chl = 7 DBDCIdx= 0, Band= 0
- [ 43.500000] BW = 0,TXStream = 3, RXStream = 3, scan(1)
- [ 43.896000] mt7615_apply_dcoc() : reload Central CH [8] BW [0] from cetral freq [2447] offset [2400]
- [ 43.912000] mt7615_apply_dpd() : reload Central CH [8] BW [0] from cetral freq [2442] i[45] offset [4bf8]
- [ 43.932000] MtCmdChannelSwitch: control_chl = 8,control_ch2=0, central_chl = 8 DBDCIdx= 0, Band= 0
- [ 43.952000] BW = 0,TXStream = 3, RXStream = 3, scan(1)
- [ 44.172000] mt7615_apply_dcoc() : reload Central CH [9] BW [0] from cetral freq [2447] offset [2400]
- [ 44.188000] mt7615_apply_dpd() : reload Central CH [9] BW [0] from cetral freq [2442] i[45] offset [4bf8]
- [ 44.208000] MtCmdChannelSwitch: control_chl = 9,control_ch2=0, central_chl = 9 DBDCIdx= 0, Band= 0
- [ 44.228000] BW = 0,TXStream = 3, RXStream = 3, scan(1)
- [ 44.548000] mt7615_apply_dcoc() : reload Central CH [10] BW [0] from cetral freq [2467] offset [2500]
- [ 44.564000] mt7615_apply_dpd() : reload Central CH [10] BW [0] from cetral freq [2462] i[46] offset [4cd0]
- [ 44.584000] MtCmdChannelSwitch: control_chl = 10,control_ch2=0, central_chl = 10 DBDCIdx= 0, Band= 0
- [ 44.604000] BW = 0,TXStream = 3, RXStream = 3, scan(1)
- [ 44.824000] mt7615_apply_dcoc() : reload Central CH [11] BW [0] from cetral freq [2467] offset [2500]
- [ 44.840000] mt7615_apply_dpd() : reload Central CH [11] BW [0] from cetral freq [2462] i[46] offset [4cd0]
- [ 44.860000] MtCmdChannelSwitch: control_chl = 11,control_ch2=0, central_chl = 11 DBDCIdx= 0, Band= 0
- [ 44.880000] BW = 0,TXStream = 3, RXStream = 3, scan(1)
- [ 45.100000] AutoChSelUpdateChannel(): Update channel for wdev0 for this band PhyMode = 14,Channel = 10
- [ 45.120000] Current Channel is 10. DfsZeroWaitSupport=0
- [ 45.128000] [PMF]APPMFInit:: apidx=0, MFPC=0, MFPR=0, SHA256=0
- [ 45.140000] [PMF]WPAMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
- [ 45.152000] mt7615_apply_dcoc() : reload Central CH [3] BW [0] from cetral freq [2417] offset [2200]
- [ 45.172000] mt7615_apply_dpd() : reload Central CH [3] BW [0] from cetral freq [2422] i[44] offset [4b20]
- [ 45.192000] MtCmdChannelSwitch: control_chl = 3,control_ch2=0, central_chl = 3 DBDCIdx= 0, Band= 0
- [ 45.208000] BW = 0,TXStream = 3, RXStream = 3, scan(1)
- [ 45.232000] AP OBSS SYNC - BBP R4 to 20MHz.l
- [ 45.736000] mt7615_apply_dcoc() : reload Central CH [4] BW [0] from cetral freq [2432] offset [2300]
- [ 45.752000] mt7615_apply_dpd() : reload Central CH [4] BW [0] from cetral freq [2422] i[44] offset [4b20]
- [ 45.772000] MtCmdChannelSwitch: control_chl = 4,control_ch2=0, central_chl = 4 DBDCIdx= 0, Band= 0
- [ 45.792000] BW = 0,TXStream = 3, RXStream = 3, scan(1)
- [ 45.812000] AP OBSS SYNC - BBP R4 to 20MHz.l
- [ 46.120000] mt7615_apply_dcoc() : reload Central CH [5] BW [0] from cetral freq [2432] offset [2300]
- [ 46.136000] mt7615_apply_dpd() : reload Central CH [5] BW [0] from cetral freq [2442] i[45] offset [4bf8]
- [ 46.156000] MtCmdChannelSwitch: control_chl = 5,control_ch2=0, central_chl = 5 DBDCIdx= 0, Band= 0
- [ 46.176000] BW = 0,TXStream = 3, RXStream = 3, scan(1)
- [ 46.196000] AP OBSS SYNC - BBP R4 to 20MHz.l
- [ 46.532000] mt7615_apply_dcoc() : reload Central CH [6] BW [0] from cetral freq [2432] offset [2300]
- [ 46.548000] mt7615_apply_dpd() : reload Central CH [6] BW [0] from cetral freq [2442] i[45] offset [4bf8]
- [ 46.568000] MtCmdChannelSwitch: control_chl = 6,control_ch2=0, central_chl = 6 DBDCIdx= 0, Band= 0
- [ 46.588000] BW = 0,TXStream = 3, RXStream = 3, scan(1)
- [ 46.608000] AP OBSS SYNC - BBP R4 to 20MHz.l
- [ 46.916000] mt7615_apply_dcoc() : reload Central CH [7] BW [0] from cetral freq [2447] offset [2400]
- [ 46.932000] mt7615_apply_dpd() : reload Central CH [7] BW [0] from cetral freq [2442] i[45] offset [4bf8]
- [ 46.952000] MtCmdChannelSwitch: control_chl = 7,control_ch2=0, central_chl = 7 DBDCIdx= 0, Band= 0
- [ 46.972000] BW = 0,TXStream = 3, RXStream = 3, scan(1)
- [ 46.992000] AP OBSS SYNC - BBP R4 to 20MHz.l
- [ 47.300000] mt7615_apply_dcoc() : reload Central CH [8] BW [0] from cetral freq [2447] offset [2400]
- [ 47.316000] mt7615_apply_dpd() : reload Central CH [8] BW [0] from cetral freq [2442] i[45] offset [4bf8]
- [ 47.336000] MtCmdChannelSwitch: control_chl = 8,control_ch2=0, central_chl = 8 DBDCIdx= 0, Band= 0
- [ 47.356000] BW = 0,TXStream = 3, RXStream = 3, scan(1)
- [ 47.376000] AP OBSS SYNC - BBP R4 to 20MHz.l
- [ 47.684000] mt7615_apply_dcoc() : reload Central CH [9] BW [0] from cetral freq [2447] offset [2400]
- [ 47.700000] mt7615_apply_dpd() : reload Central CH [9] BW [0] from cetral freq [2442] i[45] offset [4bf8]
- [ 47.720000] MtCmdChannelSwitch: control_chl = 9,control_ch2=0, central_chl = 9 DBDCIdx= 0, Band= 0
- [ 47.740000] BW = 0,TXStream = 3, RXStream = 3, scan(1)
- [ 47.760000] AP OBSS SYNC - BBP R4 to 20MHz.l
- [ 48.108000] mt7615_apply_dcoc() : reload Central CH [10] BW [0] from cetral freq [2467] offset [2500]
- [ 48.124000] mt7615_apply_dpd() : reload Central CH [10] BW [0] from cetral freq [2462] i[46] offset [4cd0]
- [ 48.144000] MtCmdChannelSwitch: control_chl = 10,control_ch2=0, central_chl = 10 DBDCIdx= 0, Band= 0
- [ 48.164000] BW = 0,TXStream = 3, RXStream = 3, scan(1)
- [ 48.184000] AP OBSS SYNC - BBP R4 to 20MHz.l
- [ 48.492000] mt7615_apply_dcoc() : reload Central CH [11] BW [0] from cetral freq [2467] offset [2500]
- [ 48.508000] mt7615_apply_dpd() : reload Central CH [11] BW [0] from cetral freq [2462] i[46] offset [4cd0]
- [ 48.528000] MtCmdChannelSwitch: control_chl = 11,control_ch2=0, central_chl = 11 DBDCIdx= 0, Band= 0
- [ 48.548000] BW = 0,TXStream = 3, RXStream = 3, scan(1)
- [ 48.568000] AP OBSS SYNC - BBP R4 to 20MHz.l
- [ 48.876000] mt7615_apply_dcoc() : reload Central CH [12] BW [0] from cetral freq [2467] offset [2500]
- [ 48.892000] mt7615_apply_dpd() : reload Central CH [12] BW [0] from cetral freq [2462] i[46] offset [4cd0]
- [ 48.912000] MtCmdChannelSwitch: control_chl = 12,control_ch2=0, central_chl = 12 DBDCIdx= 0, Band= 0
- [ 48.932000] BW = 0,TXStream = 3, RXStream = 3, scan(1)
- [ 48.952000] AP OBSS SYNC - BBP R4 to 20MHz.l
- [ 49.260000] mt7615_apply_dcoc() : reload Central CH [13] BW [0] from cetral freq [2467] offset [2500]
- [ 49.276000] mt7615_apply_dpd() : reload Central CH [13] BW [0] from cetral freq [2462] i[46] offset [4cd0]
- [ 49.296000] MtCmdChannelSwitch: control_chl = 13,control_ch2=0, central_chl = 13 DBDCIdx= 0, Band= 0
- [ 49.316000] BW = 0,TXStream = 3, RXStream = 3, scan(1)
- [ 49.336000] AP OBSS SYNC - BBP R4 to 20MHz.l
- [ 49.644000] wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:127 for WDEV_TYPE:1
- [ 49.644000] LinkToOmacIdx = 0, LinkToWdevType = 1
- [ 49.796000] mt7615_apply_dcoc() : reload Central CH [10] BW [0] from cetral freq [2467] offset [2500]
- [ 49.816000] mt7615_apply_dpd() : reload Central CH [10] BW [0] from cetral freq [2462] i[46] offset [4cd0]
- [ 49.836000] MtCmdChannelSwitch: control_chl = 10,control_ch2=0, central_chl = 10 DBDCIdx= 0, Band= 0
- [ 49.852000] BW = 0,TXStream = 3, RXStream = 3, scan(0)
- [ 49.908000] wlan_operate_set_vht_bw(): new vht_bw:1 > cap_vht_bw: 0, correct to cap_vht_bw
- [ 49.928000] wlan_operate_set_vht_bw(): new vht_bw:1 > cap_vht_bw: 0, correct to cap_vht_bw
- [ 49.944000] wlan_operate_set_vht_bw(): new vht_bw:1 > cap_vht_bw: 0, correct to cap_vht_bw
- [ 49.964000] wlan_operate_set_vht_bw(): new vht_bw:1 > cap_vht_bw: 0, correct to cap_vht_bw
- [ 49.980000] wlan_operate_set_vht_bw(): new vht_bw:1 > cap_vht_bw: 0, correct to cap_vht_bw
- [ 50.000000] wlan_operate_set_vht_bw(): new vht_bw:1 > cap_vht_bw: 0, correct to cap_vht_bw
- [ 50.052000] red_is_enabled: set CR4/N9 RED Enable to 1.
- [ 50.060000] cp_support_is_enabled: set CR4 CP_SUPPORT to Mode 2.
- [ 50.076000] ***********dev->ifindex = 9
- [ 50.144000] device ra0 entered promiscuous mode
- [ 50.152000] br-lan: port 2(ra0) entered forwarding state
- [ 50.164000] br-lan: port 2(ra0) entered forwarding state
- [ 50.344000] DriverOwn()::Return since already in Driver Own...
- [ 50.360000] RT_CfgSetMacAddress : invalid length (0)
- [ 50.380000] default ApCliAPSDCapable[0]=0
- [ 50.388000] default ApCliAPSDCapable[1]=0
- [ 50.416000] [PMF]Set_PMFMFPC_Proc:: apidx=0, Desired MFPC=0
- [ 50.440000] AndesSendCmdMsg: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD
- [ 50.504000] AndesRestartCheck: Current TOP_MISC2(0x1)
- [ 50.528000] WfMcuHwInit: Before NICLoadFirmware, check IcapMode=0
- [ 50.540000] AndesRestartCheck: Current TOP_MISC2(0x1)
- [ 50.660000] WfMcuHwInit: NICLoadFirmware OK, Check IcapMode=0
- [ 50.672000] efuse_probe: efuse = 10000212
- [ 51.232000] mt7615_antenna_default_reset(): TxPath = 3, RxPath = 3
- [ 51.244000] mt7615_antenna_default_reset(): DBDC 2G TxPath = 1, 2G RxPath = 1
- [ 51.256000] mt7615_antenna_default_reset(): DBDC 5G TxPath = 1, 2G RxPath = 1
- [ 51.272000] RcRadioInit(): DbdcMode=0, ConcurrentBand=1
- [ 51.284000] RcRadioInit(): pRadioCtrl=864ee434,Band=0,rfcap=3,channel=1,PhyMode=2 extCha=0xf
- [ 51.304000] CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
- [ 51.316000] CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
- [ 51.332000] CmdRxHdrTransBLUpdateRsp::EventExtCmdResult.u4Status = 0x0
- [ 51.344000] MT7615BBPInit():BBP Initialization.....
- [ 51.352000] Band 0: valid=1, isDBDC=0, Band=2, CBW=1, CentCh/PrimCh=1/1, prim_ch_idx=0, txStream=2
- [ 51.372000] Band 1: valid=0, isDBDC=0, Band=0, CBW=0, CentCh/PrimCh=0/0, prim_ch_idx=0, txStream=0
- [ 51.388000] MT7615BBPInit() todo
- [ 51.400000] mt7615_apply_dcoc() : reload Central CH [42] BW [2] from cetral freq [5210] offset [1900]
- [ 51.416000] mt7615_apply_dpd() : reload Central CH [42] BW [2] from cetral freq [5220] i[9] offset [2d98]
- [ 51.436000] MtCmdChannelSwitch: control_chl = 36,control_ch2=0, central_chl = 42 DBDCIdx= 0, Band= 0
- [ 51.456000] BW = 2,TXStream = 3, RXStream = 3, scan(1)
- [ 51.808000] mt7615_apply_dcoc() : reload Central CH [42] BW [2] from cetral freq [5210] offset [1900]
- [ 51.824000] mt7615_apply_dpd() : reload Central CH [42] BW [2] from cetral freq [5220] i[9] offset [2d98]
- [ 51.844000] MtCmdChannelSwitch: control_chl = 40,control_ch2=0, central_chl = 42 DBDCIdx= 0, Band= 0
- [ 51.864000] BW = 2,TXStream = 3, RXStream = 3, scan(1)
- [ 52.084000] mt7615_apply_dcoc() : reload Central CH [42] BW [2] from cetral freq [5210] offset [1900]
- [ 52.100000] mt7615_apply_dpd() : reload Central CH [42] BW [2] from cetral freq [5220] i[9] offset [2d98]
- [ 52.120000] MtCmdChannelSwitch: control_chl = 44,control_ch2=0, central_chl = 42 DBDCIdx= 0, Band= 0
- [ 52.140000] BW = 2,TXStream = 3, RXStream = 3, scan(1)
- [ 52.168000] br-lan: port 2(ra0) entered forwarding state
- [ 52.456000] mt7615_apply_dcoc() : reload Central CH [42] BW [2] from cetral freq [5210] offset [1900]
- [ 52.472000] mt7615_apply_dpd() : reload Central CH [42] BW [2] from cetral freq [5220] i[9] offset [2d98]
- [ 52.492000] MtCmdChannelSwitch: control_chl = 48,control_ch2=0, central_chl = 42 DBDCIdx= 0, Band= 0
- [ 52.512000] BW = 2,TXStream = 3, RXStream = 3, scan(1)
- [ 52.836000] mt7615_apply_dcoc() : reload Central CH [58] BW [2] from cetral freq [5290] offset [1a00]
- [ 52.852000] mt7615_apply_dpd() : reload Central CH [58] BW [2] from cetral freq [5300] i[13] offset [30f8]
- [ 52.872000] MtCmdChannelSwitch: control_chl = 52,control_ch2=0, central_chl = 58 DBDCIdx= 0, Band= 0
- [ 52.892000] BW = 2,TXStream = 3, RXStream = 3, scan(1)
- [ 53.112000] mt7615_apply_dcoc() : reload Central CH [58] BW [2] from cetral freq [5290] offset [1a00]
- [ 53.128000] mt7615_apply_dpd() : reload Central CH [58] BW [2] from cetral freq [5300] i[13] offset [30f8]
- [ 53.148000] MtCmdChannelSwitch: control_chl = 56,control_ch2=0, central_chl = 58 DBDCIdx= 0, Band= 0
- [ 53.168000] BW = 2,TXStream = 3, RXStream = 3, scan(1)
- [ 53.388000] mt7615_apply_dcoc() : reload Central CH [58] BW [2] from cetral freq [5290] offset [1a00]
- [ 53.404000] mt7615_apply_dpd() : reload Central CH [58] BW [2] from cetral freq [5300] i[13] offset [30f8]
- [ 53.424000] MtCmdChannelSwitch: control_chl = 60,control_ch2=0, central_chl = 58 DBDCIdx= 0, Band= 0
- [ 53.444000] BW = 2,TXStream = 3, RXStream = 3, scan(1)
- [ 53.816000] mt7615_apply_dcoc() : reload Central CH [58] BW [2] from cetral freq [5290] offset [1a00]
- [ 53.832000] mt7615_apply_dpd() : reload Central CH [58] BW [2] from cetral freq [5300] i[13] offset [30f8]
- [ 53.852000] MtCmdChannelSwitch: control_chl = 64,control_ch2=0, central_chl = 58 DBDCIdx= 0, Band= 0
- [ 53.872000] BW = 2,TXStream = 3, RXStream = 3, scan(1)
- [ 54.092000] mt7615_apply_dcoc() : reload Central CH [106] BW [2] from cetral freq [5530] offset [1d00]
- [ 54.108000] mt7615_apply_dpd() : reload Central CH [106] BW [2] from cetral freq [5540] i[25] offset [3b18]
- [ 54.128000] MtCmdChannelSwitch: control_chl = 100,control_ch2=0, central_chl = 106 DBDCIdx= 0, Band= 0
- [ 54.148000] BW = 2,TXStream = 3, RXStream = 3, scan(1)
- [ 54.368000] mt7615_apply_dcoc() : reload Central CH [106] BW [2] from cetral freq [5530] offset [1d00]
- [ 54.384000] mt7615_apply_dpd() : reload Central CH [106] BW [2] from cetral freq [5540] i[25] offset [3b18]
- [ 54.404000] MtCmdChannelSwitch: control_chl = 104,control_ch2=0, central_chl = 106 DBDCIdx= 0, Band= 0
- [ 54.424000] BW = 2,TXStream = 3, RXStream = 3, scan(1)
- [ 54.780000] mt7615_apply_dcoc() : reload Central CH [106] BW [2] from cetral freq [5530] offset [1d00]
- [ 54.796000] mt7615_apply_dpd() : reload Central CH [106] BW [2] from cetral freq [5540] i[25] offset [3b18]
- [ 54.816000] MtCmdChannelSwitch: control_chl = 108,control_ch2=0, central_chl = 106 DBDCIdx= 0, Band= 0
- [ 54.836000] BW = 2,TXStream = 3, RXStream = 3, scan(1)
- [ 55.076000] mt7615_apply_dcoc() : reload Central CH [106] BW [2] from cetral freq [5530] offset [1d00]
- [ 55.092000] mt7615_apply_dpd() : reload Central CH [106] BW [2] from cetral freq [5540] i[25] offset [3b18]
- [ 55.112000] MtCmdChannelSwitch: control_chl = 112,control_ch2=0, central_chl = 106 DBDCIdx= 0, Band= 0
- [ 55.132000] BW = 2,TXStream = 3, RXStream = 3, scan(1)
- [ 55.352000] mt7615_apply_dcoc() : reload Central CH [122] BW [2] from cetral freq [5610] offset [1e00]
- [ 55.368000] mt7615_apply_dpd() : reload Central CH [122] BW [2] from cetral freq [5620] i[29] offset [3e78]
- [ 55.388000] MtCmdChannelSwitch: control_chl = 116,control_ch2=0, central_chl = 122 DBDCIdx= 0, Band= 0
- [ 55.408000] BW = 2,TXStream = 3, RXStream = 3, scan(1)
- [ 55.732000] mt7615_apply_dcoc() : reload Central CH [122] BW [2] from cetral freq [5610] offset [1e00]
- [ 55.748000] mt7615_apply_dpd() : reload Central CH [122] BW [2] from cetral freq [5620] i[29] offset [3e78]
- [ 55.768000] MtCmdChannelSwitch: control_chl = 120,control_ch2=0, central_chl = 122 DBDCIdx= 0, Band= 0
- [ 55.788000] BW = 2,TXStream = 3, RXStream = 3, scan(1)
- [ 56.008000] mt7615_apply_dcoc() : reload Central CH [122] BW [2] from cetral freq [5610] offset [1e00]
- [ 56.024000] mt7615_apply_dpd() : reload Central CH [122] BW [2] from cetral freq [5620] i[29] offset [3e78]
- [ 56.044000] MtCmdChannelSwitch: control_chl = 124,control_ch2=0, central_chl = 122 DBDCIdx= 0, Band= 0
- [ 56.064000] BW = 2,TXStream = 3, RXStream = 3, scan(1)
- [ 56.284000] mt7615_apply_dcoc() : reload Central CH [122] BW [2] from cetral freq [5610] offset [1e00]
- [ 56.300000] mt7615_apply_dpd() : reload Central CH [122] BW [2] from cetral freq [5620] i[29] offset [3e78]
- [ 56.320000] MtCmdChannelSwitch: control_chl = 128,control_ch2=0, central_chl = 122 DBDCIdx= 0, Band= 0
- [ 56.340000] BW = 2,TXStream = 3, RXStream = 3, scan(1)
- [ 56.560000] AutoChSelUpdateChannel(): Update channel for wdev0 for this band PhyMode = 49,Channel = 52
- [ 56.580000] Current Channel is 52. DfsZeroWaitSupport=0
- [ 56.588000] [PMF]APPMFInit:: apidx=0, MFPC=0, MFPR=0, SHA256=0
- [ 56.600000] [PMF]WPAMakeRsnIeCap: RSNIE Capability MFPC=0, MFPR=0
- [ 56.612000] wtc_acquire_groupkey_wcid: Found a non-occupied wtbl_idx:127 for WDEV_TYPE:1
- [ 56.612000] LinkToOmacIdx = 0, LinkToWdevType = 1
- [ 56.784000] mt7615_apply_dcoc() : reload Central CH [58] BW [2] from cetral freq [5290] offset [1a00]
- [ 56.800000] mt7615_apply_dpd() : reload Central CH [58] BW [2] from cetral freq [5300] i[13] offset [30f8]
- [ 56.820000] MtCmdChannelSwitch: control_chl = 52,control_ch2=0, central_chl = 58 DBDCIdx= 0, Band= 0
- [ 56.840000] BW = 2,TXStream = 3, RXStream = 3, scan(0)
- [ 56.936000] red_is_enabled: set CR4/N9 RED Enable to 1.
- [ 56.948000] cp_support_is_enabled: set CR4 CP_SUPPORT to Mode 2.
- [ 56.960000] ***********dev->ifindex = a
- [ 57.032000] device rai0 entered promiscuous mode
- [ 57.040000] br-lan: port 3(rai0) entered forwarding state
- [ 57.052000] br-lan: port 3(rai0) entered forwarding state
- [ 58.728000]
- [ 58.728000] Set_Led_Proc ==> arg = 00-00-00-00-02-00-00-00
- [ 58.744000]
- [ 58.744000] Set_Led_Proc
- [ 58.752000] 00
- [ 58.752000] 00
- [ 58.756000] 00
- [ 58.760000] 00
- [ 58.764000] 02
- [ 58.768000] 00
- [ 58.772000] 00
- [ 58.772000] 00
- [ 58.776000] AndesLedEnhanceOP: Success!
- [ 58.808000]
- [ 58.808000] Set_Led_Proc ==> arg = 00-00-00-00-02-00-00-00
- [ 58.824000]
- [ 58.824000] Set_Led_Proc
- [ 58.832000] 00
- [ 58.836000] 00
- [ 58.840000] 00
- [ 58.844000] 00
- [ 58.844000] 02
- [ 58.848000] 00
- [ 58.852000] 00
- [ 58.856000] 00
- [ 58.860000] AndesLedEnhanceOP: Success!
- [ 59.056000] br-lan: port 3(rai0) entered forwarding state
- BusyBox v1.19.4 (2018-05-07 22:18:58 CST) built-in shell (ash)
- Enter 'help' for a list of built-in commands.
- MM NM MMMMMMM M M
- $MMMMM MMMMM MMMMMMMMMMM MMM MMM
- MMMMMMMM MM MMMMM. MMMMM:MMMMMM: MMMM MMMMM
- MMMM= MMMMMM MMM MMMM MMMMM MMMM MMMMMM MMMM MMMMM'
- MMMM= MMMMM MMMM MM MMMMM MMMM MMMM MMMMNMMMMM
- MMMM= MMMM MMMMM MMMMM MMMM MMMM MMMMMMMM
- MMMM= MMMM MMMMMM MMMMM MMMM MMMM MMMMMMMMM
- MMMM= MMMM MMMMM, NMMMMMMMM MMMM MMMM MMMMMMMMMMM
- MMMM= MMMM MMMMMM MMMMMMMM MMMM MMMM MMMM MMMMMM
- MMMM= MMMM MM MMMM MMMM MMMM MMMM MMMM MMMM
- MMMM$ ,MMMMM MMMMM MMMM MMM MMMM MMMMM MMMM MMMM
- MMMMMMM: MMMMMMM M MMMMMMMMMMMM MMMMMMM MMMMMMM
- MMMMMM MMMMN M MMMMMMMMM MMMM MMMM
- MMMM M MMMMMMM M M
- M
- ---------------------------------------------------------------
- For those about to rock... (Attitude Adjustment, r40021)
- ---------------------------------------------------------------
- root@WRC-1900GST:/# FC start
- [ 71.464000] u32 classifier
- [ 71.472000] Performance counters on
- [ 71.480000] Actions configured
- FC Disable
- root@WRC-1900GST:/# lspci
- /bin/ash: lspci: not found
- root@WRC-1900GST:/# lsusb
- /bin/ash: lsusb: not found
- root@WRC-1900GST:/# cat /proc/iomem
- 00000000-07ffffff : System RAM
- 01001000-01444d07 : Kernel code
- 01444d08-0157439f : Kernel data
- 60000000-6fffffff : PCI MEM1
- 60000000-600fffff : PCI Bus 0000:01
- 60000000-600fffff : 0000:01:00.0
- 60000000-600fffff : 0000:01:00.0
- 60100000-601fffff : PCI Bus 0000:02
- 60100000-601fffff : 0000:02:00.0
- 60100000-601fffff : 0000:02:00.0
- 60200000-6020ffff : 0000:00:00.0
- 60210000-6021ffff : 0000:00:01.0
- be002800-be002fff : rt_dma.0
- be003000-be0031a0 : MT7621-NAND.0
- be003800-be003950 : MT7621-NAND.0
- root@WRC-1900GST:/# cat /proc/interrupts
- CPU0 CPU1 CPU2 CPU3
- 3: 31 15 0 0 MIPS GIC eth2
- 4: 1597 0 690 0 MIPS GIC ra0
- 7: 24517 24669 24720 24853 MIPS GIC timer
- 11: 0 0 0 0 MIPS GIC HS_DMA
- 12: 0 0 0 0 MIPS GIC ralink_gpio
- 23: 0 0 0 0 MIPS GIC Ralink_ESW
- 24: 1234 0 0 67 MIPS GIC rai0
- 26: 307 0 0 0 MIPS GIC serial
- 56: 5201 0 0 0 MIPS GIC IPI_resched
- 57: 0 5284 0 0 MIPS GIC IPI_resched
- 58: 0 0 4391 0 MIPS GIC IPI_resched
- 59: 0 0 0 4612 MIPS GIC IPI_resched
- 60: 7666 0 0 0 MIPS GIC IPI_call
- 61: 0 6155 0 0 MIPS GIC IPI_call
- 62: 0 0 7967 0 MIPS GIC IPI_call
- 63: 0 0 0 6005 MIPS GIC IPI_call
- ERR: 0
- root@WRC-1900GST:/# cat /proc/cpuinfo
- system type : MT7621
- machine : Unknown
- processor : 0
- cpu model : MIPS 1004Kc V2.15
- BogoMIPS : 583.68
- wait instruction : yes
- microsecond timers : yes
- tlb_entries : 32
- extra interrupt vector : yes
- hardware watchpoint : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb]
- isa : mips1 mips2 mips32r1 mips32r2
- ASEs implemented : mips16 dsp mt
- shadow register sets : 1
- kscratch registers : 0
- core : 0
- VPE : 0
- VCED exceptions : not available
- VCEI exceptions : not available
- processor : 1
- cpu model : MIPS 1004Kc V2.15
- BogoMIPS : 583.68
- wait instruction : yes
- microsecond timers : yes
- tlb_entries : 32
- extra interrupt vector : yes
- hardware watchpoint : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb]
- isa : mips1 mips2 mips32r1 mips32r2
- ASEs implemented : mips16 dsp mt
- shadow register sets : 1
- kscratch registers : 0
- core : 0
- VPE : 1
- VCED exceptions : not available
- VCEI exceptions : not available
- processor : 2
- cpu model : MIPS 1004Kc V2.15
- BogoMIPS : 583.68
- wait instruction : yes
- microsecond timers : yes
- tlb_entries : 32
- extra interrupt vector : yes
- hardware watchpoint : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb]
- isa : mips1 mips2 mips32r1 mips32r2
- ASEs implemented : mips16 dsp mt
- shadow register sets : 1
- kscratch registers : 0
- core : 1
- VPE : 0
- VCED exceptions : not available
- VCEI exceptions : not available
- processor : 3
- cpu model : MIPS 1004Kc V2.15
- BogoMIPS : 583.68
- wait instruction : yes
- microsecond timers : yes
- tlb_entries : 32
- extra interrupt vector : yes
- hardware watchpoint : yes, count: 4, address/irw mask: [0x0ffc, 0x0ffc, 0x0ffb, 0x0ffb]
- isa : mips1 mips2 mips32r1 mips32r2
- ASEs implemented : mips16 dsp mt
- shadow register sets : 1
- kscratch registers : 0
- core : 1
- VPE : 1
- VCED exceptions : not available
- VCEI exceptions : not available
- root@WRC-1900GST:/# cat /proc/mtd
- dev: size erasesize name
- mtd0: 01000000 00010000 "ALL"
- mtd1: 00030000 00010000 "Bootloader"
- mtd2: 00010000 00010000 "Config"
- mtd3: 00010000 00010000 "Factory"
- mtd4: 00b00000 00010000 "firmware"
- mtd5: 00200000 00010000 "kernel"
- mtd6: 00900000 00010000 "rootfs"
- mtd7: 00380000 00010000 "tm_pattern"
- mtd8: 00080000 00010000 "tm_key"
- mtd9: 00030000 00010000 "art_block"
- mtd10: 00080000 00010000 "rootfs_data"
- root@WRC-1900GST:/# busybox
- BusyBox v1.19.4 (2018-05-07 22:18:58 CST) multi-call binary.
- Copyright (C) 1998-2011 Erik Andersen, Rob Landley, Denys Vlasenko
- and others. Licensed under GPLv2.
- See source distribution for full notice.
- Usage: busybox [function] [arguments]...
- or: busybox --list[-full]
- or: function [arguments]...
- BusyBox is a multi-call binary that combines many common Unix
- utilities into a single executable. Most people will create a
- link to busybox for each function they wish to use and BusyBox
- will act like whatever it was invoked as.
- Currently defined functions:
- [, [[, adduser, arping, ash, awk, basename, brctl, bunzip2, bzcat, cat,
- chgrp, chmod, chown, chroot, clear, cmp, cp, crond, crontab, cut, date,
- dd, deluser, df, dirname, dmesg, du, echo, egrep, env, expr, false,
- fgrep, find, free, fsync, grep, gunzip, gzip, halt, head, hexdump,
- hostid, hwclock, id, ifconfig, init, insmod, ip, kill, killall, klogd,
- less, ln, lock, logger, logread, ls, lsmod, md5sum, mkdir, mkfifo,
- mknod, mktemp, mount, mv, nc, netmsg, netstat, nice, nohup, nslookup,
- passwd, pgrep, pidof, ping, ping6, pivot_root, poweroff, printf, ps,
- pwd, readlink, reboot, reset, rm, rmdir, rmmod, route, script, sed,
- seq, sh, sleep, sort, split, start-stop-daemon, strings, switch_root,
- sync, sysctl, syslogd, tail, tar, tee, telnet, telnetd, test, tftp,
- time, top, touch, tr, traceroute, true, udhcpc, umount, uname, uniq,
- unzip, uptime, vconfig, vi, watchdog, wc, wget, which, xargs, yes,
- zcat
- root@WRC-1900GST:/# lsmod|sort
- Module Size Used by Tainted: P
- bonding 93419 0
- cls_fw 4080 0
- cls_u32 7296 0
- crc_ccitt 1035 1 ppp_async
- crc_itu_t 1035 0
- ebt_802_3 704 0
- ebt_among 2416 0
- ebt_arp 1632 0
- ebt_arpreply 1104 0
- ebt_dnat 848 0
- ebt_ip 1328 0
- ebt_ip6 1632 0
- ebt_limit 1376 0
- ebt_mark 784 0
- ebt_mark_m 640 0
- ebt_pkttype 560 0
- ebt_redirect 960 0
- ebt_snat 928 0
- ebt_stp 1888 0
- ebt_vlan 944 0
- ebtable_broute 880 0
- ebtable_filter 1040 0
- ebtable_nat 1040 0
- eeprom_93cx6 2063 0
- hw_nat 27383 0
- ip6_tables 11233 3 ip6table_raw,ip6table_mangle,ip6table_filter
- ip6t_REJECT 2976 0
- ip6t_ah 896 0
- ip6t_eui64 800 0
- ip6t_frag 960 0
- ip6t_hbh 1424 0
- ip6t_mh 752 0
- ip6table_filter 816 1
- ip6table_mangle 1248 0
- ip6table_raw 768 0
- ip_gre 7984 0
- ipt_FORBID 3264 0
- ipt_PORTTRIGGER 3395 0
- ipt_REJECT 2288 2
- ipt_weburl 18048 0
- iptable_filter 880 1
- iptable_mangle 1152 1
- iptable_raw 816 1
- mt_wifi 3783250 2
- nf_conntrack_broadcast 1005 1 nf_conntrack_snmp
- nf_conntrack_h323 37263 1 nf_nat_h323
- nf_conntrack_irc 3232 1 nf_nat_irc
- nf_conntrack_netlink 23584 0
- nf_conntrack_pptp 3824 1 nf_nat_pptp
- nf_conntrack_proto_gre 3541 1 nf_conntrack_pptp
- nf_conntrack_snmp 816 1 nf_nat_snmp_basic
- nf_conntrack_tftp 2960 1 nf_nat_tftp
- nf_defrag_ipv6 14305 0
- nf_nat_h323 6032 0
- nf_nat_irc 1072 0
- nf_nat_pptp 1536 0
- nf_nat_proto_gre 928 1 nf_nat_pptp
- nf_nat_snmp_basic 7968 0
- nf_nat_tftp 592 0
- nfnetlink 3083 1 nf_conntrack_netlink
- ppp_async 8144 0
- sch_htb 15632 0
- xt_CT 3008 0
- xt_LOG 11440 0
- xt_NETMAP 1264 0
- xt_REDIRECT 1120 0
- xt_TCPMSS 3040 0
- xt_addrtype 2480 0
- xt_comment 512 0
- xt_connbytes 1696 0
- xt_connmark 1344 0
- xt_conntrack 2352 7
- xt_helper 912 0
- xt_iprange 1120 0
- xt_layer7 12505 0
- xt_limit 1472 0
- xt_mac 656 0
- xt_mark 704 0
- xt_multiport 1264 1
- xt_owner 976 0
- xt_physdev 1376 0
- xt_pkttype 672 0
- xt_quota 880 0
- xt_recent 7856 0
- xt_state 768 0
- xt_string 816 0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement