Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x511f2112]
- [ 0.000000] Linux version 5.4.12-ifc6601-arm64-dev (inforce@inforce-server-Z9PE-D8-WS) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02)) #2 SMP PREEMPT Tue Jan 21 11:12:26 IST 2020
- [ 0.000000] Machine model: Qualcomm Technologies, Inc. DB820c
- [ 0.000000] efi: Getting EFI parameters from FDT:
- [ 0.000000] efi: UEFI not found.
- [ 0.000000] Reserved memory: created DMA memory pool at 0x0000000090b00000, size 10 MiB
- [ 0.000000] OF: reserved mem: initialized node gpu@8f200000, compatible id shared-dma-pool
- [ 0.000000] cma: Reserved 32 MiB at 0x00000000fe000000
- [ 0.000000] NUMA: No NUMA configuration found
- [ 0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x000000017e44ffff]
- [ 0.000000] NUMA: NODE_DATA [mem 0x17dc61800-0x17dc62fff]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA32 [mem 0x0000000080000000-0x00000000ffffffff]
- [ 0.000000] Normal [mem 0x0000000100000000-0x000000017e44ffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000080000000-0x00000000857fffff]
- [ 0.000000] node 0: [mem 0x0000000091700000-0x00000000a1dfffff]
- [ 0.000000] node 0: [mem 0x00000000a2000000-0x000000017e44ffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000017e44ffff]
- [ 0.000000] On node 0 totalpages: 992080
- [ 0.000000] DMA32 zone: 7420 pages used for memmap
- [ 0.000000] DMA32 zone: 0 pages reserved
- [ 0.000000] DMA32 zone: 474880 pages, LIFO batch:63
- [ 0.000000] Normal zone: 8082 pages used for memmap
- [ 0.000000] Normal zone: 517200 pages, LIFO batch:63
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.0 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.0
- [ 0.000000] psci: OSI mode supported.
- [ 0.000000] percpu: Embedded 23 pages/cpu s53528 r8192 d32488 u94208
- [ 0.000000] pcpu-alloc: s53528 r8192 d32488 u94208 alloc=23*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Detected PIPT I-cache on CPU0
- [ 0.000000] CPU features: detected: GIC system register CPU interface
- [ 0.000000] CPU features: detected: Qualcomm erratum 1009, ARM erratum 1286807
- [ 0.000000] CPU features: detected: Qualcomm Technologies Falkor/Kryo erratum 1003
- [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
- [ 0.000000] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 976578
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: root=PARTLABEL=rootfs console=tty0 console=ttyMSM0,115200n8 loglevel=10 log_buf_len=4M androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.veritymode=enforcing androidboot.serialno=94a5c9b7 androidboot.baseband=apq mdss_mdp.panel=0
- [ 0.000000] printk: log_buf_len: 4194304 bytes
- [ 0.000000] printk: early log buf free: 127944(97%)
- [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] software IO TLB: mapped [mem 0xfa000000-0xfe000000] (64MB)
- [ 0.000000] Memory: 3749684K/3968320K available (13948K kernel code, 2284K rwdata, 7464K rodata, 5760K init, 473K bss, 185868K reserved, 32768K cma-reserved)
- [ 0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GIC: enabling workaround for GICv3: Qualcomm MSM8996 broken firmware
- [ 0.000000] GICv3: 608 SPIs implemented
- [ 0.000000] GICv3: 0 Extended SPIs implemented
- [ 0.000000] GICv3: Distributor has no Range Selector support
- [ 0.000000] GICv3: 16 PPIs implemented
- [ 0.000000] GICv3: VLPI support, no direct LPI support
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000009c00000
- [ 0.000000] ITS: No ITS available, not enabling LPIs
- [ 0.000000] random: get_random_bytes called from start_kernel+0x2b8/0x458 with crng_init=0
- [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
- [ 0.000003] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
- [ 0.000363] Console: colour dummy device 80x25
- [ 0.000849] printk: console [tty0] enabled
- [ 0.000931] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
- [ 0.000952] pid_max: default: 32768 minimum: 301
- [ 0.001022] LSM: Security Framework initializing
- [ 0.001075] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
- [ 0.001095] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
- [ 0.023454] ASID allocator initialised with 32768 entries
- [ 0.031450] rcu: Hierarchical SRCU implementation.
- [ 0.043042] EFI services will not be available.
- [ 0.043362] smp: Bringing up secondary CPUs ...
- [ 0.072044] Detected PIPT I-cache on CPU1
- [ 0.072070] GICv3: CPU1: found redistributor 1 region 0:0x0000000009c40000
- [ 0.072109] CPU1: Booted secondary processor 0x0000000001 [0x511f2112]
- [ 0.106929] Detected PIPT I-cache on CPU2
- [ 0.107760] GICv3: CPU2: found redistributor 100 region 0:0x0000000009c80000
- [ 0.108663] CPU2: Booted secondary processor 0x0000000100 [0x511f2052]
- [ 0.146658] Detected PIPT I-cache on CPU3
- [ 0.147446] GICv3: CPU3: found redistributor 101 region 0:0x0000000009cc0000
- [ 0.148303] CPU3: Booted secondary processor 0x0000000101 [0x511f2052]
- [ 0.152523] smp: Brought up 1 node, 4 CPUs
- [ 0.152611] SMP: Total of 4 processors activated.
- [ 0.152636] CPU features: detected: 32-bit EL0 Support
- [ 0.152652] CPU features: detected: CRC32 instructions
- [ 0.769460] CPU: All CPU(s) started at EL1
- [ 0.769966] alternatives: patching kernel code
- [ 0.778300] devtmpfs: initialized
- [ 0.788056] Registered cp15_barrier emulation handler
- [ 0.788178] Registered setend emulation handler
- [ 0.788706] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.788733] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
- [ 0.789489] pinctrl core: initialized pinctrl subsystem
- [ 0.791067] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.791071] thermal_sys: Registered thermal governor 'power_allocator'
- [ 0.792263] DMI not present or invalid.
- [ 0.792689] NET: Registered protocol family 16
- [ 0.795245] DMA: preallocated 256 KiB pool for atomic allocations
- [ 0.795274] audit: initializing netlink subsys (disabled)
- [ 0.797224] audit: type=2000 audit(0.264:1): state=initialized audit_enabled=0 res=1
- [ 0.799386] cpuidle: using governor menu
- [ 0.799781] hw-breakpoint: found 8 breakpoint and 4 watchpoint registers.
- [ 0.803068] Serial: AMBA PL011 UART driver
- [ 0.836603] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
- [ 0.836627] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
- [ 0.836639] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.836652] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
- [ 0.861175] cryptd: max_cpu_qlen set to 1000
- [ 0.932354] ACPI: Interpreter disabled.
- [ 0.937937] iommu: Default domain type: Translated
- [ 0.939515] vgaarb: loaded
- [ 0.939826] SCSI subsystem initialized
- [ 0.940181] libata version 3.00 loaded.
- [ 0.940392] usbcore: registered new interface driver usbfs
- [ 0.940429] usbcore: registered new interface driver hub
- [ 0.940504] usbcore: registered new device driver usb
- [ 0.941141] pps_core: LinuxPPS API ver. 1 registered
- [ 0.941154] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.941176] PTP clock support registered
- [ 0.941294] EDAC MC: Ver: 3.0.0
- [ 0.944367] FPGA manager framework
- [ 0.944449] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.948303] clocksource: Switched to clocksource arch_sys_counter
- [ 0.948475] VFS: Disk quotas dquot_6.6.0
- [ 0.948526] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.948713] pnp: PnP ACPI: disabled
- [ 0.960248] s1: supplied by regulator-dummy
- [ 0.960496] s2: supplied by regulator-dummy
- [ 0.960683] s3: supplied by regulator-dummy
- [ 0.960735] s3: Bringing 0uV into 1300000-1300000uV
- [ 0.960898] s4: supplied by regulator-dummy
- [ 0.960936] s4: Bringing 0uV into 1800000-1800000uV
- [ 0.961233] s5: supplied by regulator-dummy
- [ 0.961276] s5: Bringing 0uV into 2150000-2150000uV
- [ 0.961440] s6: supplied by regulator-dummy
- [ 0.961651] s7: supplied by regulator-dummy
- [ 0.961692] s7: Bringing 0uV into 800000-800000uV
- [ 0.961857] s8: supplied by regulator-dummy
- [ 0.962043] s9: supplied by regulator-dummy
- [ 0.962242] s10: supplied by regulator-dummy
- [ 0.962439] s11: supplied by regulator-dummy
- [ 0.962637] s12: supplied by regulator-dummy
- [ 0.962808] l1: supplied by s3
- [ 0.962848] l1: Bringing 0uV into 1000000-1000000uV
- [ 0.962979] l2: supplied by s3
- [ 0.963016] l2: Bringing 0uV into 1250000-1250000uV
- [ 0.963159] l3: supplied by s3
- [ 0.963197] l3: Bringing 0uV into 850000-850000uV
- [ 0.963343] l4: supplied by s3
- [ 0.963381] l4: Bringing 0uV into 1225000-1225000uV
- [ 0.963511] l5: supplied by s5
- [ 0.963728] l6: supplied by regulator-dummy
- [ 0.963770] l6: Bringing 0uV into 1200000-1200000uV
- [ 0.963920] l7: supplied by s5
- [ 0.964188] l8: supplied by regulator-dummy
- [ 0.964232] l8: Bringing 0uV into 1800000-1800000uV
- [ 0.964428] l9: supplied by regulator-dummy
- [ 0.964467] l9: Bringing 0uV into 1800000-1800000uV
- [ 0.964667] l10: supplied by regulator-dummy
- [ 0.964707] l10: Bringing 0uV into 1800000-1800000uV
- [ 0.964859] l11: supplied by s3
- [ 0.964897] l11: Bringing 0uV into 1150000-1150000uV
- [ 0.965094] l12: supplied by regulator-dummy
- [ 0.965135] l12: Bringing 0uV into 1800000-1800000uV
- [ 0.965326] l13: supplied by regulator-dummy
- [ 0.965373] l13: Bringing 0uV into 1800000-1800000uV
- [ 0.965520] l14: supplied by s5
- [ 0.965559] l14: Bringing 0uV into 1800000-1800000uV
- [ 0.965717] l15: supplied by s5
- [ 0.965754] l15: Bringing 0uV into 1800000-1800000uV
- [ 0.965954] l16: supplied by regulator-dummy
- [ 0.966002] l16: Bringing 0uV into 2700000-2700000uV
- [ 0.966215] l17: supplied by regulator-dummy
- [ 0.966254] l17: Bringing 0uV into 2500000-2500000uV
- [ 0.966447] l18: supplied by regulator-dummy
- [ 0.966484] l18: Bringing 0uV into 2700000-2700000uV
- [ 0.966703] l19: supplied by regulator-dummy
- [ 0.966751] l19: Bringing 0uV into 3000000-3000000uV
- [ 0.966911] l20: supplied by s5
- [ 0.966949] l20: Bringing 0uV into 2950000-2950000uV
- [ 0.967103] l21: supplied by s5
- [ 0.967141] l21: Bringing 0uV into 2950000-2950000uV
- [ 0.967362] l22: supplied by regulator-dummy
- [ 0.967411] l22: Bringing 0uV into 3300000-3300000uV
- [ 0.967628] l23: supplied by regulator-dummy
- [ 0.967667] l23: Bringing 0uV into 2800000-2800000uV
- [ 0.967881] l24: supplied by regulator-dummy
- [ 0.967921] l24: Bringing 0uV into 3075000-3075000uV
- [ 0.968087] l25: supplied by s3
- [ 0.968180] l25: Bringing 0uV into 1200000-1200000uV
- [ 0.968352] l26: supplied by s3
- [ 0.968547] l27: supplied by s3
- [ 0.968584] l27: Bringing 0uV into 1000000-1000000uV
- [ 0.968747] l28: supplied by s3
- [ 0.968784] l28: Bringing 0uV into 925000-925000uV
- [ 0.969018] l29: supplied by regulator-dummy
- [ 0.969057] l29: Bringing 0uV into 2800000-2800000uV
- [ 0.969287] l30: supplied by regulator-dummy
- [ 0.969329] l30: Bringing 0uV into 1800000-1800000uV
- [ 0.969499] l31: supplied by s3
- [ 0.969759] l32: supplied by regulator-dummy
- [ 0.969799] l32: Bringing 0uV into 1800000-1800000uV
- [ 0.970018] lvs1: supplied by regulator-dummy
- [ 0.970241] lvs2: supplied by regulator-dummy
- [ 1.076413] NET: Registered protocol family 2
- [ 1.077211] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
- [ 1.077250] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
- [ 1.077357] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
- [ 1.077470] TCP: Hash tables configured (established 32768 bind 32768)
- [ 1.077607] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
- [ 1.077646] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
- [ 1.077799] NET: Registered protocol family 1
- [ 1.078992] RPC: Registered named UNIX socket transport module.
- [ 1.079008] RPC: Registered udp transport module.
- [ 1.079017] RPC: Registered tcp transport module.
- [ 1.079027] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 1.080211] PCI: CLS 0 bytes, default 64
- [ 1.080461] Unpacking initramfs...
- [ 1.262629] Freeing initrd memory: 5568K
- [ 1.267110] kvm [1]: HYP mode not available
- [ 2.282401] Initialise system trusted keyrings
- [ 2.285504] workingset: timestamp_bits=44 max_order=20 bucket_order=0
- [ 2.290988] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 2.295379] NFS: Registering the id_resolver key type
- [ 2.295413] Key type id_resolver registered
- [ 2.295423] Key type id_legacy registered
- [ 2.295437] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 2.295680] 9p: Installing v9fs 9p2000 file system support
- [ 2.618705] Key type asymmetric registered
- [ 2.618725] Asymmetric key parser 'x509' registered
- [ 2.618780] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
- [ 2.618794] io scheduler mq-deadline registered
- [ 2.618804] io scheduler kyber registered
- [ 2.628009] qcom-qmp-phy 34000.phy: Registered Qcom-QMP phy
- [ 2.628683] qcom-qmp-phy 7410000.phy: Registered Qcom-QMP phy
- [ 2.629736] ufs_qcom_phy_qmp_14nm 627000.phy: invalid resource
- [ 2.636098] qcom-pcie 608000.pcie: 608000.pcie supply vddpe-3v3 not found, using dummy regulator
- [ 2.636274] qcom-pcie 608000.pcie: host bridge /soc/agnoc@0/pcie@608000 ranges:
- [ 2.636319] qcom-pcie 608000.pcie: IO 0x0d200000..0x0d2fffff -> 0x0d200000
- [ 2.636346] qcom-pcie 608000.pcie: MEM 0x0d300000..0x0dffffff -> 0x0d300000
- [ 3.745859] qcom-pcie 608000.pcie: Phy link never came up
- [ 3.747967] qcom-pcie 608000.pcie: cannot initialize host
- [ 3.749705] qcom-pcie: probe of 608000.pcie failed with error -110
- [ 3.750342] qcom-pcie 610000.pcie: 610000.pcie supply vddpe-3v3 not found, using dummy regulator
- [ 3.750472] qcom-pcie 610000.pcie: host bridge /soc/agnoc@0/pcie@610000 ranges:
- [ 3.750517] qcom-pcie 610000.pcie: IO 0x0e200000..0x0e2fffff -> 0x0e200000
- [ 3.750544] qcom-pcie 610000.pcie: MEM 0x0e300000..0x0fffffff -> 0x0e300000
- [ 3.961687] qcom-pcie 610000.pcie: Link up
- [ 3.961825] qcom-pcie 610000.pcie: PCI host bridge to bus 0002:00
- [ 3.961843] pci_bus 0002:00: root bus resource [bus 00-ff]
- [ 3.961856] pci_bus 0002:00: root bus resource [io 0x100000-0x1fffff] (bus address [0xe200000-0xe2fffff])
- [ 3.961873] pci_bus 0002:00: root bus resource [mem 0x0e300000-0x0fffffff]
- [ 3.961905] pci 0002:00:00.0: [17cb:0104] type 01 class 0x060400
- [ 3.961937] pci 0002:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
- [ 3.962011] pci 0002:00:00.0: PME# supported from D0 D3hot
- [ 3.965004] pci 0002:01:00.0: [1969:1083] type 00 class 0x020000
- [ 3.965243] pci 0002:01:00.0: reg 0x10: [mem 0x0e300000-0x0e33ffff 64bit]
- [ 3.965308] pci 0002:01:00.0: reg 0x18: [io 0x100000-0x10007f]
- [ 3.966020] pci 0002:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 3.978665] pci 0002:00:00.0: BAR 14: assigned [mem 0x0e300000-0x0e3fffff]
- [ 3.978687] pci 0002:00:00.0: BAR 0: assigned [mem 0x0e400000-0x0e400fff]
- [ 3.978703] pci 0002:00:00.0: BAR 13: assigned [io 0x100000-0x100fff]
- [ 3.978722] pci 0002:01:00.0: BAR 0: assigned [mem 0x0e300000-0x0e33ffff 64bit]
- [ 3.978810] pci 0002:01:00.0: BAR 2: assigned [io 0x100000-0x10007f]
- [ 3.978847] pci 0002:00:00.0: PCI bridge to [bus 01-ff]
- [ 3.978859] pci 0002:00:00.0: bridge window [io 0x100000-0x100fff]
- [ 3.978873] pci 0002:00:00.0: bridge window [mem 0x0e300000-0x0e3fffff]
- [ 3.980589] pcieport 0002:00:00.0: PME: Signaling with IRQ 64
- [ 3.983752] pcieport 0002:00:00.0: AER: enabled with IRQ 64
- [ 3.983872] pci 0002:01:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
- [ 3.988500] EINJ: ACPI disabled.
- [ 4.019940] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 4.022259] SuperH (H)SCI(F) driver initialized
- [ 4.022971] msm_serial 7570000.serial: msm_serial: detected port #2
- [ 4.023006] msm_serial 7570000.serial: uartclk = 19200000
- [ 4.023072] 7570000.serial: ttyMSM2 at MMIO 0x7570000 (irq = 8, base_baud = 1200000) is a MSM
- [ 4.023246] serial serial0: tty port ttyMSM2 registered
- [ 4.023427] msm_serial 75b0000.serial: msm_serial: detected port #0
- [ 4.023452] msm_serial 75b0000.serial: uartclk = 7372800
- [ 4.023487] 75b0000.serial: ttyMSM0 at MMIO 0x75b0000 (irq = 11, base_baud = 460800) is a MSM
- [ 4.023515] msm_serial: console setup on port #0
- [ 5.602521] printk: console [ttyMSM0] enabled
- [ 5.607614] msm_serial: driver initialized
- [ 5.613022] arm-smmu da0000.iommu: probing hardware configuration...
- [ 5.615432] arm-smmu da0000.iommu: SMMUv2 with:
- [ 5.622003] arm-smmu da0000.iommu: stage 1 translation
- [ 5.626199] arm-smmu da0000.iommu: address translation ops
- [ 5.631407] arm-smmu da0000.iommu: non-coherent table walk
- [ 5.636962] arm-smmu da0000.iommu: (IDR0.CTTW overridden by FW configuration)
- [ 5.642527] arm-smmu da0000.iommu: stream matching with 4 register groups
- [ 5.649838] arm-smmu da0000.iommu: 2 context banks (0 stage-2 only)
- [ 5.656692] arm-smmu da0000.iommu: Supported page sizes: 0x63315000
- [ 5.663180] arm-smmu da0000.iommu: Stage-1: 32-bit VA -> 36-bit IPA
- [ 5.670987] ------------[ cut here ]------------
- [ 5.675859] gpu_gx status stuck at 'off'
- [ 5.675884] WARNING: CPU: 1 PID: 1 at drivers/clk/qcom/gdsc.c:145 gdsc_toggle_logic+0xe0/0xe8
- [ 5.684352] Modules linked in:
- [ 5.692768] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.4.12-ifc6601-arm64-dev #2
- [ 5.695722] Hardware name: Qualcomm Technologies, Inc. DB820c (DT)
- [ 5.703274] pstate: 60000005 (nZCv daif -PAN -UAO)
- [ 5.709346] pc : gdsc_toggle_logic+0xe0/0xe8
- [ 5.714119] lr : gdsc_toggle_logic+0xe0/0xe8
- [ 5.718544] sp : ffff80001003b9f0
- [ 5.722796] x29: ffff80001003b9f0 x28: 0000000000000000
- [ 5.726012] x27: ffff800011640068 x26: ffff800011c06a50
- [ 5.731394] x25: 0000000000000001 x24: ffff0000f8479810
- [ 5.736689] x23: 0000000000000001 x22: ffff800011c06e28
- [ 5.741985] x21: 0000000000000001 x20: 00000000ffffff92
- [ 5.747279] x19: ffff800011c06a50 x18: ffffffffffffffff
- [ 5.752574] x17: 0000000000000000 x16: 0000000000000001
- [ 5.757869] x15: ffff800011b298c8 x14: 0720072007200720
- [ 5.763164] x13: 0720072007200720 x12: 0720072007200720
- [ 5.768460] x11: 0720072007200720 x10: 0720072007200720
- [ 5.773754] x9 : 0720072007200720 x8 : ffff800011d6cc98
- [ 5.779049] x7 : 7473207375746174 x6 : ffff800011d6c7ac
- [ 5.784344] x5 : 0000000000000000 x4 : 0000000000000000
- [ 5.789640] x3 : 00000000ffffffff x2 : ffff8000ec546000
- [ 5.794936] x1 : d6d1fbf85f984800 x0 : 0000000000000000
- [ 5.800232] Call trace:
- [ 5.805523] gdsc_toggle_logic+0xe0/0xe8
- [ 5.807696] gdsc_enable+0xd4/0x210
- [ 5.811865] genpd_power_on.part.25+0xe8/0x220
- [ 5.815074] genpd_power_on.part.25+0x44/0x220
- [ 5.819589] __genpd_dev_pm_attach+0x20c/0x218
- [ 5.824016] genpd_dev_pm_attach+0x64/0x70
- [ 5.828445] dev_pm_domain_attach+0x48/0x50
- [ 5.832524] platform_drv_probe+0x38/0xa8
- [ 5.836603] really_probe+0xf8/0x480
- [ 5.840767] driver_probe_device+0x124/0x148
- [ 5.844414] device_driver_attach+0x6c/0x78
- [ 5.848666] __driver_attach+0xf0/0x178
- [ 5.852577] bus_for_each_dev+0x68/0xc8
- [ 5.856391] driver_attach+0x20/0x28
- [ 5.860211] bus_add_driver+0x158/0x248
- [ 5.864031] driver_register+0x60/0x110
- [ 5.867590] __platform_driver_register+0x40/0x48
- [ 5.871415] arm_smmu_driver_init+0x18/0x20
- [ 5.876274] do_one_initcall+0x58/0x1a8
- [ 5.880267] kernel_init_freeable+0x1a0/0x244
- [ 5.884089] kernel_init+0x10/0x108
- [ 5.888597] ret_from_fork+0x10/0x1c
- [ 5.891906] ---[ end trace c1d7bc8d476773b2 ]---
- [ 5.896263] arm-smmu d00000.iommu: probing hardware configuration...
- [ 5.900432] arm-smmu d00000.iommu: SMMUv2 with:
- [ 5.906741] arm-smmu d00000.iommu: stage 1 translation
- [ 5.910940] arm-smmu d00000.iommu: address translation ops
- [ 5.916144] arm-smmu d00000.iommu: non-coherent table walk
- [ 5.921700] arm-smmu d00000.iommu: (IDR0.CTTW overridden by FW configuration)
- [ 5.927261] arm-smmu d00000.iommu: stream matching with 2 register groups
- [ 5.934576] arm-smmu d00000.iommu: 2 context banks (0 stage-2 only)
- [ 5.941432] arm-smmu d00000.iommu: Supported page sizes: 0x63315000
- [ 5.947928] arm-smmu d00000.iommu: Stage-1: 32-bit VA -> 36-bit IPA
- [ 5.954283] arm-smmu d00000.iommu: Handoff smr: 80000000 s2cr: 30000000 cb: 0
- [ 5.961627] arm-smmu 1600000.iommu: probing hardware configuration...
- [ 5.967642] arm-smmu 1600000.iommu: SMMUv2 with:
- [ 5.974069] arm-smmu 1600000.iommu: stage 1 translation
- [ 5.978730] arm-smmu 1600000.iommu: address translation ops
- [ 5.984026] arm-smmu 1600000.iommu: non-coherent table walk
- [ 5.989674] arm-smmu 1600000.iommu: (IDR0.CTTW overridden by FW configuration)
- [ 5.995316] arm-smmu 1600000.iommu: stream matching with 15 register groups
- [ 6.002369] arm-smmu 1600000.iommu: 12 context banks (0 stage-2 only)
- [ 6.009652] arm-smmu 1600000.iommu: Supported page sizes: 0x63315000
- [ 6.015976] arm-smmu 1600000.iommu: Stage-1: 36-bit VA -> 36-bit IPA
- [ 6.025145] arm-smmu d40000.arm,smmu-venus: probing hardware configuration...
- [ 6.028927] arm-smmu d40000.arm,smmu-venus: SMMUv2 with:
- [ 6.036068] arm-smmu d40000.arm,smmu-venus: stage 1 translation
- [ 6.041409] arm-smmu d40000.arm,smmu-venus: address translation ops
- [ 6.047396] arm-smmu d40000.arm,smmu-venus: non-coherent table walk
- [ 6.053738] arm-smmu d40000.arm,smmu-venus: (IDR0.CTTW overridden by FW configuration)
- [ 6.060084] arm-smmu d40000.arm,smmu-venus: stream matching with 42 register groups
- [ 6.067835] arm-smmu d40000.arm,smmu-venus: 7 context banks (0 stage-2 only)
- [ 6.075804] arm-smmu d40000.arm,smmu-venus: Supported page sizes: 0x63315000
- [ 6.082817] arm-smmu d40000.arm,smmu-venus: Stage-1: 32-bit VA -> 36-bit IPA
- [ 6.119595] loop: module loaded
- [ 6.125378] ufshcd-qcom 624000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
- [ 6.129711] scsi host0: ufshcd
- [ 6.143114] spi_qup 7575000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
- [ 6.143928] spi_qup 75ba000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
- [ 6.150328] spmi spmi-0: PMIC arbiter version v2 (0x20010000)
- [ 6.158730] ufshcd-qcom 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
- [ 6.165544] gpio gpiochip3: (400f000.qcom,spmi:pmic@2:gpios@c000): detected irqchip that is shared with multiple gpiochips: please fix the driver.
- [ 6.175400] s1: supplied by regulator-dummy
- [ 6.187734] s2: supplied by regulator-dummy
- [ 6.189151] ufshcd-qcom 624000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[1, 1], pwr[FAST MODE, FAST MODE], rate = 2
- [ 6.192179] l1: supplied by regulator-dummy
- [ 6.196132] scsi 0:0:0:49488: scsi_add_lun: correcting incorrect peripheral device type 0x0 for W-LUN 0x c150hN
- [ 6.208828] libphy: Fixed MDIO Bus: probed
- [ 6.211516] scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6
- [ 6.222815] tun: Universal TUN/TAP device driver, 1.6
- [ 6.236411] thunder_xcv, ver 1.0
- [ 6.240265] thunder_bgx, ver 1.0
- [ 6.241652] scsi 0:0:0:49476: scsi_add_lun: correcting incorrect peripheral device type 0x0 for W-LUN 0x c144hN
- [ 6.243653] nicpf, ver 1.0
- [ 6.248833] scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6
- [ 6.258363] hclge is initializing
- [ 6.268882] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
- [ 6.272054] hns3: Copyright (c) 2017 Huawei Corporation.
- [ 6.279347] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
- [ 6.284658] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 6.286225] scsi 0:0:0:49456: scsi_add_lun: correcting incorrect peripheral device type 0x0 for W-LUN 0x c130hN
- [ 6.290339] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
- [ 6.290343] igb: Copyright (c) 2007-2014 Intel Corporation.
- [ 6.290388] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
- [ 6.290391] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
- [ 6.290947] sky2: driver version 1.30
- [ 6.297734] scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6
- [ 6.308021] usbcore: registered new interface driver rtl8150
- [ 6.345754] usbcore: registered new interface driver r8152
- [ 6.351364] usbcore: registered new interface driver asix
- [ 6.355907] scsi 0:0:0:0: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6
- [ 6.356735] usbcore: registered new interface driver ax88179_178a
- [ 6.356979] VFIO - User Level meta-driver version: 0.3
- [ 6.359549] dwc3-qcom 76f8800.usb: IRQ hs_phy_irq not found
- [ 6.381269] dwc3-qcom 76f8800.usb: IRQ dp_hs_phy_irq not found
- [ 6.383314] sd 0:0:0:0: Power-on or device reset occurred
- [ 6.386748] dwc3-qcom 76f8800.usb: IRQ dm_hs_phy_irq not found
- [ 6.386754] dwc3-qcom 76f8800.usb: IRQ ss_phy_irq not found
- [ 6.387972] dwc3 7600000.dwc3: Failed to get clk 'ref': -2
- [ 6.388221] random: fast init done
- [ 6.391760] scsi 0:0:0:1: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6
- [ 6.404270] sd 0:0:0:1: Power-on or device reset occurred
- [ 6.411054] dwc3-qcom 6af8800.usb: IRQ hs_phy_irq not found
- [ 6.416918] sd 0:0:0:0: [sda] 14530560 4096-byte logical blocks: (59.5 GB/55.4 GiB)
- [ 6.418257] dwc3-qcom 6af8800.usb: IRQ dp_hs_phy_irq not found
- [ 6.426572] sd 0:0:0:0: [sda] 16384-byte physical blocks
- [ 6.431791] dwc3-qcom 6af8800.usb: IRQ dm_hs_phy_irq not found
- [ 6.431795] dwc3-qcom 6af8800.usb: IRQ ss_phy_irq not found
- [ 6.432926] dwc3 6a00000.dwc3: Failed to get clk 'ref': -2
- [ 6.433839] scsi 0:0:0:2: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6
- [ 6.437549] sd 0:0:0:0: [sda] Write Protect is off
- [ 6.446133] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 6.450793] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
- [ 6.453595] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
- [ 6.453901] sd 0:0:0:1: [sdb] 16384-byte physical blocks
- [ 6.456245] ehci-pci: EHCI PCI platform driver
- [ 6.462106] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 6.465957] sd 0:0:0:1: [sdb] Write Protect is off
- [ 6.466272] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
- [ 6.467400] ehci-platform: EHCI generic platform driver
- [ 6.473332] sd 0:0:0:0: [sda] Optimal transfer size 8192 bytes not a multiple of physical block size (16384 bytes)
- [ 6.473580] sd 0:0:0:2: Power-on or device reset occurred
- [ 6.481403] ehci-orion: EHCI orion driver
- [ 6.483041] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 6.487157] sd 0:0:0:1: [sdb] Optimal transfer size 8192 bytes not a multiple of physical block size (16384 bytes)
- [ 6.487954] scsi 0:0:0:3: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6
- [ 6.492430] ehci-exynos: EHCI EXYNOS driver
- [ 6.492565] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 6.492603] ohci-pci: OHCI PCI platform driver
- [ 6.492655] ohci-platform: OHCI generic platform driver
- [ 6.492831] ohci-exynos: OHCI EXYNOS driver
- [ 6.493042] usbcore: registered new interface driver usb-storage
- [ 6.493134] usbcore: registered new interface driver usbserial_generic
- [ 6.493153] usbserial: USB Serial support registered for generic
- [ 6.493639] sd 0:0:0:3: Power-on or device reset occurred
- [ 6.497135] i2c /dev entries driver
- [ 6.498081] i2c_qup 75b5000.i2c: using default clock-frequency 100000
- [ 6.505512] sd 0:0:0:3: [sdd] 32768 4096-byte logical blocks: (134 MB/128 MiB)
- [ 6.510038] i2c_qup 75b5000.i2c:
- tx channel not available
- [ 6.512669] i2c_qup 75b6000.i2c: using default clock-frequency 100000
- [ 6.514410] sd 0:0:0:3: [sdd] 16384-byte physical blocks
- [ 6.522862] i2c_qup 75b6000.i2c:
- tx channel not available
- [ 6.527276] i2c_qup 7577000.i2c: using default clock-frequency 100000
- [ 6.527760] sd 0:0:0:2: [sdc] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
- [ 6.532685] i2c_qup 7577000.i2c:
- tx channel not available
- [ 6.533019] sd 0:0:0:3: [sdd] Write Protect is off
- [ 6.537553] scsi 0:0:0:4: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6
- [ 6.537772] sd 0:0:0:2: [sdc] 16384-byte physical blocks
- [ 6.548128] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10
- [ 6.557675] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 6.566500] sd 0:0:0:2: [sdc] Write Protect is off
- [ 6.578811] sd 0:0:0:4: Power-on or device reset occurred
- [ 6.584666] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
- [ 6.584778] sd 0:0:0:3: [sdd] Optimal transfer size 8192 bytes not a multiple of physical block size (16384 bytes)
- [ 6.584962] scsi 0:0:0:5: Direct-Access SAMSUNG KLUCG4J1CB-B0B1 0700 PQ: 0 ANSI: 6
- [ 6.585466] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 6.634106] sd 0:0:0:4: [sde] 1048576 4096-byte logical blocks: (4.29 GB/4.00 GiB)
- [ 6.635905] sd 0:0:0:5: Power-on or device reset occurred
- [ 6.643894] sd 0:0:0:4: [sde] 16384-byte physical blocks
- [ 6.650079] sd 0:0:0:2: [sdc] Optimal transfer size 8192 bytes not a multiple of physical block size (16384 bytes)
- [ 6.664951] sd 0:0:0:4: [sde] Write Protect is off
- [ 6.669027] sd 0:0:0:5: [sdf] 8192 4096-byte logical blocks: (33.6 MB/32.0 MiB)
- [ 6.669039] sd 0:0:0:5: [sdf] 16384-byte physical blocks
- [ 6.669166] sda: sda1
- [ 6.669227] sd 0:0:0:5: [sdf] Write Protect is off
- [ 6.669232] sd 0:0:0:5: [sdf] Mode Sense: 00 32 00 10
- [ 6.669641] sd 0:0:0:5: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 6.669805] sd 0:0:0:5: [sdf] Optimal transfer size 8192 bytes not a multiple of physical block size (16384 bytes)
- [ 6.676875] sd 0:0:0:4: [sde] Mode Sense: 00 32 00 10
- [ 6.682320] sdb: sdb1
- [ 6.687202] sdd: sdd1 sdd2 sdd3
- [ 6.689831] sd 0:0:0:3: [sdd] Attached SCSI disk
- [ 6.702638] sd 0:0:0:4: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 6.710767] sdc: sdc1
- [ 6.722385] input: pm8941_pwrkey as /devices/platform/soc/400f000.qcom,spmi/spmi-0/0-00/400f000.qcom,spmi:pmic@0:pon@800/400f000.qcom,spmi:pmic@0:pon@800:pwrkey/input/input0
- [ 6.727692] sd 0:0:0:4: [sde] Optimal transfer size 8192 bytes not a multiple of physical block size (16384 bytes)
- [ 6.728261] sd 0:0:0:1: [sdb] Attached SCSI disk
- [ 6.730060] sd 0:0:0:2: [sdc] Attached SCSI disk
- [ 6.734781] sdf: sdf1 sdf2 sdf3 sdf4 sdf5 sdf6 sdf7 sdf8 sdf9
- [ 6.735724] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 6.798283] input: pm8941_pwrkey as /devices/platform/soc/400f000.qcom,spmi/spmi-0/0-00/400f000.qcom,spmi:pmic@0:pon@800/400f000.qcom,spmi:pmic@0:pon@800:resin/input/input1
- [ 6.804788] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30
- [ 6.806953] sd 0:0:0:5: [sdf] Attached SCSI disk
- [ 6.955131] sd 0:0:0:4: [sde] Attached SCSI disk
- [ 7.138632] sdhci: Secure Digital Host Controller Interface driver
- [ 7.139526] sdhci: Copyright(c) Pierre Ossman
- [ 7.173215] Synopsys Designware Multimedia Card Interface Driver
- [ 7.235541] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 7.315179] sdhci_msm 74a4900.sdhci: Got CD GPIO
- [ 7.420298] mmc0: SDHCI controller on 74a4900.sdhci [74a4900.sdhci] using ADMA 64-bit
- [ 7.425480] ledtrig-cpu: registered to indicate activity on CPUs
- [ 7.429068] usbcore: registered new interface driver usbhid
- [ 7.433226] usbhid: USB HID core driver
- [ 7.440764] gpio gpiochip1: (400f000.qcom,spmi:pmic@0:gpios@c000): allocate IRQ 101, hwirq 21
- [ 7.442318] gpio gpiochip1: (400f000.qcom,spmi:pmic@0:gpios@c000): found parent hwirq 213
- [ 7.451025] gpio gpiochip1: (400f000.qcom,spmi:pmic@0:gpios@c000): alloc_irqs_parent for 101 parent hwirq 213
- [ 7.462147] gpio gpiochip3: (400f000.qcom,spmi:pmic@2:gpios@c000): allocate IRQ 102, hwirq 5
- [ 7.469111] gpio gpiochip3: (400f000.qcom,spmi:pmic@2:gpios@c000): found parent hwirq 197
- [ 7.477569] gpio gpiochip3: (400f000.qcom,spmi:pmic@2:gpios@c000): alloc_irqs_parent for 102 parent hwirq 197
- [ 7.492037] usbcore: registered new interface driver snd-usb-audio
- [ 7.497226] NET: Registered protocol family 10
- [ 7.504332] Segment Routing with IPv6
- [ 7.506067] NET: Registered protocol family 17
- [ 7.509890] 9pnet: Installing 9P2000 support
- [ 7.514173] Key type dns_resolver registered
- [ 7.518992] registered taskstats version 1
- [ 7.522834] Loading compiled-in X.509 certificates
- [ 7.555819] qcom-qusb2-phy 7411000.phy: Registered Qcom-QUSB2 phy
- [ 7.556595] qcom-qusb2-phy 7412000.phy: Registered Qcom-QUSB2 phy
- [ 7.562134] qcom-pcie 600000.pcie: host bridge /soc/agnoc@0/pcie@600000 ranges:
- [ 7.567047] qcom-pcie 600000.pcie: IO 0x0c200000..0x0c2fffff -> 0x0c200000
- [ 7.574113] qcom-pcie 600000.pcie: MEM 0x0c300000..0x0cffffff -> 0x0c300000
- [ 7.873749] qcom-pcie 600000.pcie: Link up
- [ 7.873907] qcom-pcie 600000.pcie: PCI host bridge to bus 0000:00
- [ 7.876760] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 7.882910] pci_bus 0000:00: root bus resource [io 0x200000-0x2fffff] (bus address [0xc200000-0xc2fffff])
- [ 7.888296] pci_bus 0000:00: root bus resource [mem 0x0c300000-0x0cffffff]
- [ 7.897944] pci 0000:00:00.0: [17cb:0104] type 01 class 0x060400
- [ 7.904808] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff]
- [ 7.911011] pci 0000:00:00.0: PME# supported from D0 D3hot
- [ 7.919875] pci 0000:01:00.0: [168c:003e] type 00 class 0x028000
- [ 7.922777] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x001fffff 64bit]
- [ 7.929547] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
- [ 7.946822] pci 0000:00:00.0: BAR 14: assigned [mem 0x0c400000-0x0c5fffff]
- [ 7.946858] pci 0000:00:00.0: BAR 0: assigned [mem 0x0c300000-0x0c300fff]
- [ 7.952634] pci 0000:01:00.0: BAR 0: assigned [mem 0x0c400000-0x0c5fffff 64bit]
- [ 7.959544] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
- [ 7.966572] pci 0000:00:00.0: bridge window [mem 0x0c400000-0x0c5fffff]
- [ 7.973486] pcieport 0000:00:00.0: PME: Signaling with IRQ 104
- [ 7.980279] pcieport 0000:00:00.0: AER: enabled with IRQ 104
- [ 7.986760] arm-smmu b40000.iommu: probing hardware configuration...
- [ 7.990385] arm-smmu b40000.iommu: SMMUv2 with:
- [ 7.996661] arm-smmu b40000.iommu: stage 1 translation
- [ 8.000858] arm-smmu b40000.iommu: address translation ops
- [ 8.006082] arm-smmu b40000.iommu: non-coherent table walk
- [ 8.011626] arm-smmu b40000.iommu: (IDR0.CTTW overridden by FW configuration)
- [ 8.017182] arm-smmu b40000.iommu: stream matching with 2 register groups
- [ 8.024512] arm-smmu b40000.iommu: 2 context banks (0 stage-2 only)
- [ 8.031362] arm-smmu b40000.iommu: Supported page sizes: 0x63315000
- [ 8.037861] arm-smmu b40000.iommu: Stage-1: 48-bit VA -> 36-bit IPA
- [ 8.046943] dwc3-qcom 76f8800.usb: IRQ hs_phy_irq not found
- [ 8.050537] dwc3-qcom 76f8800.usb: IRQ dp_hs_phy_irq not found
- [ 8.055821] dwc3-qcom 76f8800.usb: IRQ dm_hs_phy_irq not found
- [ 8.061708] dwc3-qcom 76f8800.usb: IRQ ss_phy_irq not found
- [ 8.068583] dwc3 7600000.dwc3: Failed to get clk 'ref': -2
- [ 8.075463] phy phy-7412000.phy.6: QUSB2PHY pll lock failed: status reg = 0
- [ 8.078724] phy phy-7412000.phy.6: phy init failed --> -16
- [ 8.085418] dwc3 7600000.dwc3: failed to initialize core: -16
- [ 8.091014] dwc3: probe of 7600000.dwc3 failed with error -16
- [ 8.099400] dwc3-qcom 6af8800.usb: IRQ hs_phy_irq not found
- [ 8.102533] dwc3-qcom 6af8800.usb: IRQ dp_hs_phy_irq not found
- [ 8.107888] dwc3-qcom 6af8800.usb: IRQ dm_hs_phy_irq not found
- [ 8.113797] dwc3-qcom 6af8800.usb: IRQ ss_phy_irq not found
- [ 8.120662] dwc3 6a00000.dwc3: Failed to get clk 'ref': -2
- [ 8.126139] phy phy-7411000.phy.5: QUSB2PHY pll lock failed: status reg = 0
- [ 8.130790] phy phy-7411000.phy.5: phy init failed --> -16
- [ 8.137499] dwc3 6a00000.dwc3: failed to initialize core: -16
- [ 8.143099] dwc3: probe of 6a00000.dwc3 failed with error -16
- [ 8.253104] gpio gpiochip1: (400f000.qcom,spmi:pmic@0:gpios@c000): allocate IRQ 105, hwirq 1
- [ 8.254325] gpio gpiochip1: (400f000.qcom,spmi:pmic@0:gpios@c000): found parent hwirq 193
- [ 8.262429] gpio gpiochip1: (400f000.qcom,spmi:pmic@0:gpios@c000): alloc_irqs_parent for 105 parent hwirq 193
- [ 8.278515] input: gpio_keys as /devices/platform/gpio_keys/input/input2
- [ 8.290361] hctosys: unable to open rtc device (rtc0)
- [ 8.303721] cfg80211: Loading compiled-in X.509 certificates for regulatory database
- [ 8.389398] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
- [ 8.395770] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
- [ 8.397646] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db
- [ 8.417239] ALSA device list:
- [ 8.418365] No soundcards found.
- [ 8.504953] Freeing unused kernel memory: 5760K
- [ 8.517877] Run /init as init process
- [ 9.766458] cfg80211: failed to load regulatory.db
- [ 11.297837] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- [ 11.677420] systemd[1]: System time before build time, advancing clock.
- [ 13.247635] random: systemd: uninitialized urandom read (16 bytes read)
- [ 13.252040] random: systemd: uninitialized urandom read (16 bytes read)
- [ 13.254363] random: systemd: uninitialized urandom read (16 bytes read)
- [ 14.089350] EXT4-fs (sda1): re-mounted. Opts: data=ordered
- [ 14.217905] systemd-journald[302]: Received request to flush runtime journal from PID 1
- [ 16.303025] NET: Registered protocol family 42
- [ 17.263650] qcom_q6v5_pas adsp-pil: adsp-pil supply cx not found, using dummy regulator
- [ 17.263849] qcom_q6v5_pas adsp-pil: adsp-pil supply px not found, using dummy regulator
- [ 17.357572] remoteproc remoteproc0: adsp-pil is available
- [ 17.358742] remoteproc remoteproc0: Direct firmware load for qcom/msm8996/adsp.mbn failed with error -2
- [ 17.364040] remoteproc remoteproc0: Falling back to sysfs fallback for: qcom/msm8996/adsp.mbn
- [ 17.380765] remoteproc remoteproc1: 2080000.remoteproc is available
- [ 18.057889] rtc-pm8xxx 400f000.qcom,spmi:pmic@0:rtc@6000: registered as rtc0
- [ 18.066667] remoteproc remoteproc1: powering up 2080000.remoteproc
- [ 18.066749] remoteproc remoteproc1: Direct firmware load for qcom/msm8996/mba.mbn failed with error -2
- [ 18.072358] remoteproc remoteproc1: Falling back to sysfs fallback for: qcom/msm8996/mba.mbn
- [ 18.592053] mc: Linux media interface: v0.10
- [ 18.680251] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 18.680292] msm-snd-apq8096 sound: Error parsing OF data
- [ 18.751799] atl1c 0002:01:00.0: enabling device (0000 -> 0002)
- [ 18.946559] atl1c 0002:01:00.0: version 1.0.1.1-NAPI
- [ 18.947797] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 18.950675] msm-snd-apq8096 sound: Error parsing OF data
- [ 19.167506] adreno b00000.gpu: Adding to iommu group 0
- [ 19.173165] videodev: Linux video capture interface: v2.00
- [ 19.260541] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 19.260578] msm-snd-apq8096 sound: Error parsing OF data
- [ 19.357348] msm_mdp 901000.mdp: Adding to iommu group 1
- [ 19.480390] msm_mdp 901000.mdp: No interconnect support may cause display underflows!
- [ 19.481599] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 19.497039] msm-snd-apq8096 sound: Error parsing OF data
- [ 19.501553] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 19.501592] msm-snd-apq8096 sound: Error parsing OF data
- [ 19.627639] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 19.627683] msm-snd-apq8096 sound: Error parsing OF data
- [ 19.695564] msm 900000.mdss: 900000.mdss supply vdd not found, using dummy regulator
- [ 19.726886] msm_mdp 901000.mdp: [drm:mdp5_bind [msm]] MDP5 version v1.7
- [ 19.727078] msm 900000.mdss: bound 901000.mdp (ops mdp5_ops [msm])
- [ 19.937081] Bluetooth: Core ver 2.22
- [ 19.937204] NET: Registered protocol family 31
- [ 19.939725] Bluetooth: HCI device and connection manager initialized
- [ 19.978457] Bluetooth: HCI socket layer initialized
- [ 19.978493] Bluetooth: L2CAP socket layer initialized
- [ 19.986775] msm 900000.mdss: bound 9a0000.hdmi-tx (ops msm_hdmi_ops [msm])
- [ 19.988104] adreno b00000.gpu: b00000.gpu supply vdd not found, using dummy regulator
- [ 20.008409] Bluetooth: SCO socket layer initialized
- [ 20.272190] random: crng init done
- [ 20.272223] random: 7 urandom warning(s) missed due to ratelimiting
- [ 20.368896] adreno b00000.gpu: b00000.gpu supply vddcx not found, using dummy regulator
- [ 20.369309] msm 900000.mdss: [drm:msm_gpu_init [msm]] A530: using IOMMU
- [ 20.436487] ath10k_pci 0000:01:00.0: enabling device (0000 -> 0002)
- [ 20.437061] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
- [ 20.504600] qcom-venus c00000.video-codec: Adding to iommu group 2
- [ 20.517129] Bluetooth: HCI UART driver ver 2.3
- [ 20.517163] Bluetooth: HCI UART protocol H4 registered
- [ 20.524883] Bluetooth: HCI UART protocol BCSP registered
- [ 20.525721] Bluetooth: HCI UART protocol LL registered
- [ 20.598319] Bluetooth: HCI UART protocol Three-wire (H5) registered
- [ 20.598691] Bluetooth: HCI UART protocol Broadcom registered
- [ 20.715031] Bluetooth: HCI UART protocol QCA registered
- [ 20.787269] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 20.792223] msm-snd-apq8096 sound: Error parsing OF data
- [ 20.801443] msm 900000.mdss: bound b00000.gpu (ops a3xx_ops [msm])
- [ 20.873738] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 20.873803] msm-snd-apq8096 sound: Error parsing OF data
- [ 20.918996] Bluetooth: hci0: ROME setup
- [ 20.991449] remoteproc remoteproc0: powering up adsp-pil
- [ 20.991542] remoteproc remoteproc0: Direct firmware load for qcom/msm8996/adsp.mbn failed with error -2
- [ 20.999034] remoteproc remoteproc0: Falling back to sysfs fallback for: qcom/msm8996/adsp.mbn
- [ 21.020056] remoteproc remoteproc1: request_firmware failed: -11
- [ 21.020092] remoteproc remoteproc1: Boot failed: -11
- [ 21.571936] Bluetooth: hci0: QCA controller version 0x00440302
- [ 21.574061] Bluetooth: hci0: QCA Downloading qca/rampatch_00440302.bin
- [ 21.578822] atl1c 0002:01:00.0 enP2p1s0: renamed from eth0
- [ 21.587759] bluetooth hci0: Direct firmware load for qca/rampatch_00440302.bin failed with error -2
- [ 21.590597] bluetooth hci0: Falling back to sysfs fallback for: qca/rampatch_00440302.bin
- [ 21.695897] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 21.695933] [drm] Driver supports precise vblank timestamp query.
- [ 21.714898] ath10k_pci 0000:01:00.0: qca6174 hw3.2 target 0x05030000 chip_id 0x00340aff sub 0000:0000
- [ 21.714942] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 0 tracing 0 dfs 0 testmode 0
- [ 21.726846] ath10k_pci 0000:01:00.0: firmware ver WLAN.RM.4.4.1-00079-QCARMSWPZ-1 api 6 features wowlan,ignore-otp crc32 fd869beb
- [ 21.736976] remoteproc remoteproc0: request_firmware failed: -11
- [ 21.805208] Bluetooth: hci0: QCA Failed to request file: qca/rampatch_00440302.bin (-11)
- [ 21.806392] Bluetooth: hci0: QCA Failed to download patch (-11)
- [ 21.807022] [drm] Initialized msm 1.5.0 20130625 for 900000.mdss on minor 0
- [ 21.869396] ath10k_pci 0000:01:00.0: failed to fetch board data for bus=pci,bmi-chip-id=0,bmi-board-id=1 from ath10k/QCA6174/hw3.0/board-2.bin
- [ 21.869993] ath10k_pci 0000:01:00.0: board_file api 1 bmi_id 0:1 crc32 ed5f849a
- [ 21.979151] msm 900000.mdss: [drm:adreno_request_fw [msm]] loaded qcom/a530_pm4.fw from legacy location
- [ 21.979840] msm 900000.mdss: [drm:adreno_request_fw [msm]] loaded qcom/a530_pfp.fw from legacy location
- [ 21.994945] ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536
- [ 22.004444] msm 900000.mdss: [drm:adreno_request_fw [msm]] loaded qcom/a530v3_gpmu.fw2 from legacy location
- [ 22.009806] msm 900000.mdss: [drm:adreno_request_fw [msm]] loaded qcom/a530_zap.mdt from legacy location
- [ 22.016196] ath10k_pci 0000:01:00.0: htt-ver 3.47 wmi-op 4 htt-op 3 cal otp max-sta 32 raw 0 hwcrypto 1
- [ 22.116936] ath: EEPROM regdomain: 0x0
- [ 22.124210] ath: EEPROM indicates default country code should be used
- [ 22.124246] ath: doing EEPROM country->regdmn map search
- [ 22.133108] ath: country maps to regdmn code: 0x3a
- [ 22.135020] ath: Country alpha2 being used: US
- [ 22.141008] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 22.144050] msm-snd-apq8096 sound: Error parsing OF data
- [ 22.148196] ath: Regpair used: 0x3a
- [ 22.250651] ath10k_pci 0000:01:00.0 wlp1s0: renamed from wlan0
- [ 22.271348] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 22.271390] msm-snd-apq8096 sound: Error parsing OF data
- [ 22.808200] ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536
- [ 23.190878] ath10k_pci 0000:01:00.0: unsupported HTC service id: 1536
- [ 23.231158] msm_hdmi_hdcp_read_validate_aksv: AKSV QFPROM doesn't have 20 1's, 20 0's
- [ 23.231167] msm_hdmi_hdcp_read_validate_aksv: QFPROM AKSV chk failed (AKSV=6800000000)
- [ 23.231170] msm_hdmi_hdcp_auth_prepare: ASKV validation failed
- [ 23.231173] msm_hdmi_hdcp_auth_work: auth prepare failed -524
- [ 23.231177] msm_hdmi_hdcp_auth_work: hdcp is not supported
- [ 23.231678] [drm:mdp5_irq_error_handler [msm]] *ERROR* errors: 40000000
- [ 23.248485] Console: switching to colour frame buffer device 240x67
- [ 23.253591] atl1c 0002:01:00.0: atl1c: enP2p1s0 NIC Link is Up<100 Mbps Full Duplex>
- [ 23.366902] msm 900000.mdss: fb0: msmdrmfb frame buffer device
- [ 23.413764] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 23.414541] msm-snd-apq8096 sound: Error parsing OF data
- [ 23.496250] msm-snd-apq8096 sound: MultiMedia1: error getting cpu dai name
- [ 23.496456] msm-snd-apq8096 sound: Error parsing OF data
- [ 24.921102] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 24.921763] Bluetooth: BNEP filters: protocol multicast
- [ 24.927533] Bluetooth: BNEP socket layer initialized
- [ 25.483615] broken atomic modeset userspace detected, disabling atomic
- [ 43.132090] Bluetooth: RFCOMM TTY layer initialized
- [ 43.132199] Bluetooth: RFCOMM socket layer initialized
- [ 43.135800] Bluetooth: RFCOMM ver 1.11
Add Comment
Please, Sign In to add comment