Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Linux version 5.4.113 (james@SERVER) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r16582-3326b5e75c)) #0 SMP Wed Apr 21 09:31:10 2021
- [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
- [ 0.000000] printk: bootconsole [early0] enabled
- [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
- [ 0.000000] MIPS: machine is Netgear R6260
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] VPE topology {2,2} total 4
- [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
- [ 0.000000] HighMem empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
- [ 0.000000] On node 0 totalpages: 32768
- [ 0.000000] Normal zone: 288 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
- [ 0.000000] percpu: Embedded 14 pages/cpu s26480 r8192 d22672 u57344
- [ 0.000000] pcpu-alloc: s26480 r8192 d22672 u57344 alloc=14*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480
- [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
- [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
- [ 0.000000] Writing ErrCtl register=0002f330
- [ 0.000000] Readback ErrCtl register=0002f330
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 120588K/131072K available (5989K kernel code, 206K rwdata, 1264K rodata, 1232K init, 230K bss, 10484K reserved, 0K cma-reserved, 0K highmem)
- [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] rcu: Hierarchical RCU implementation.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
- [ 0.000000] NR_IRQS: 256
- [ 0.000000] random: get_random_bytes called from start_kernel+0x31c/0x534 with crng_init=0
- [ 0.000000] CPU Clock: 880MHz
- [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
- [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
- [ 0.000008] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
- [ 0.015473] Calibrating delay loop... 586.13 BogoMIPS (lpj=2930688)
- [ 0.087798] pid_max: default: 32768 minimum: 301
- [ 0.097129] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.111532] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.129493] rcu: Hierarchical SRCU implementation.
- [ 0.139559] smp: Bringing up secondary CPUs ...
- [ 1.122110] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
- [ 1.122120] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 1.122131] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 1.122227] CPU1 revision is: 0001992f (MIPS 1004Kc)
- [ 0.209197] Synchronize counters for CPU 1: done.
- [ 1.245386] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
- [ 1.245394] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 1.245403] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 1.245464] CPU2 revision is: 0001992f (MIPS 1004Kc)
- [ 0.329624] Synchronize counters for CPU 2: done.
- [ 1.362755] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
- [ 1.362762] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 1.362770] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 1.362833] CPU3 revision is: 0001992f (MIPS 1004Kc)
- [ 0.449203] Synchronize counters for CPU 3: done.
- [ 0.508809] smp: Brought up 1 node, 4 CPUs
- [ 0.521489] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.540962] futex hash table entries: 1024 (order: 3, 32768 bytes, linear)
- [ 0.554777] pinctrl core: initialized pinctrl subsystem
- [ 0.566464] NET: Registered protocol family 16
- [ 0.586231] FPU Affinity set after 11720 emulations
- [ 0.601416] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
- [ 0.622088] clocksource: Switched to clocksource GIC
- [ 0.633464] NET: Registered protocol family 2
- [ 0.642843] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
- [ 0.659372] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.674548] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
- [ 0.688533] TCP: Hash tables configured (established 1024 bind 1024)
- [ 0.701289] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
- [ 0.714173] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
- [ 0.728233] NET: Registered protocol family 1
- [ 0.736789] PCI: CLS 0 bytes, default 32
- [ 0.982029] 4 CPUs re-calibrate udelay(lpj = 2924544)
- [ 0.993810] workingset: timestamp_bits=14 max_order=15 bucket_order=1
- [ 1.014824] random: fast init done
- [ 1.024660] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 1.036141] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 1.058392] mt7621_gpio 1e000600.gpio: registering 32 gpios
- [ 1.069694] mt7621_gpio 1e000600.gpio: registering 32 gpios
- [ 1.080918] mt7621_gpio 1e000600.gpio: registering 32 gpios
- [ 1.092666] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
- [ 1.106421] printk: console [ttyS0] disabled
- [ 1.114847] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
- [ 1.132782] printk: console [ttyS0] enabled
- [ 1.149332] printk: bootconsole [early0] disabled
- [ 1.170152] mt7621-nand 1e003000.nand: Using programmed access timing: 31c07388
- [ 1.184969] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xf1
- [ 1.197618] nand: Macronix MX30LF1G18AC
- [ 1.205250] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
- [ 1.220317] mt7621-nand 1e003000.nand: ECC strength adjusted to 4 bits
- [ 1.233351] mt7621-nand 1e003000.nand: Using programmed access timing: 21005134
- [ 1.247899] mt7621-nand 1e003000.nand: Using programmed access timing: 21005134
- [ 1.262451] Scanning device for bad blocks
- [ 1.739910] Bad eraseblock 370 at 0x000002e40000
- [ 2.576398] 7 fixed-partitions partitions found on MTD device mt7621-nand
- [ 2.589906] Creating 7 MTD partitions on "mt7621-nand":
- [ 2.600308] 0x000000000000-0x000000100000 : "u-boot"
- [ 2.611342] 0x000000100000-0x000000200000 : "SC PART_MAP"
- [ 2.623194] 0x000000200000-0x000000600000 : "kernel"
- [ 2.634161] 0x000000600000-0x000002e00000 : "ubi"
- [ 2.644827] 0x000002e00000-0x000004600000 : "reserved0"
- [ 2.656458] 0x000004600000-0x000004800000 : "factory"
- [ 2.667614] 0x000004800000-0x000008000000 : "reserved1"
- [ 2.680570] libphy: Fixed MDIO Bus: probed
- [ 2.722572] libphy: mdio: probed
- [ 2.729179] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
- [ 2.744429] mtk_soc_eth 1e100000.ethernet: generated random MAC address 56:46:6a:00:33:9d
- [ 2.761544] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
- [ 2.780066] mt7621-pci 1e140000.pcie: Parsing DT failed
- [ 2.793006] NET: Registered protocol family 10
- [ 2.803234] Segment Routing with IPv6
- [ 2.810614] NET: Registered protocol family 17
- [ 2.819743] 8021q: 802.1Q VLAN Support v1.8
- [ 2.832141] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
- [ 2.859954] libphy: dsa slave smi: probed
- [ 2.868392] mt7530 mdio-bus:1f lan4 (uninitialized): PHY [dsa-0.0:00] driver [Generic PHY]
- [ 2.886258] mt7530 mdio-bus:1f lan3 (uninitialized): PHY [dsa-0.0:01] driver [Generic PHY]
- [ 2.904149] mt7530 mdio-bus:1f lan2 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY]
- [ 2.922026] mt7530 mdio-bus:1f lan1 (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY]
- [ 2.939920] mt7530 mdio-bus:1f wan (uninitialized): PHY [dsa-0.0:04] driver [Generic PHY]
- [ 2.957690] mt7530 mdio-bus:1f: configuring for fixed/rgmii link mode
- [ 2.975282] DSA: tree 0 setup
- [ 2.981518] rt2880-pinmux pinctrl: pcie is already enabled
- [ 2.992475] mt7621-pci 1e140000.pcie: Error applying setting, reverse things back
- [ 3.007527] mt7621-pci-phy 1e149000.pcie-phy: PHY for 0xbe149000 (dual port = 1)
- [ 3.022446] mt7621-pci-phy 1e14a000.pcie-phy: PHY for 0xbe14a000 (dual port = 0)
- [ 3.137145] mt7621-pci-phy 1e149000.pcie-phy: Xtal is 40MHz
- [ 3.148249] mt7621-pci-phy 1e14a000.pcie-phy: Xtal is 40MHz
- [ 3.259246] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK)
- [ 3.273108] mt7621-pci 1e140000.pcie: PCIE0 enabled
- [ 3.282813] mt7621-pci 1e140000.pcie: PCIE1 enabled
- [ 3.292525] mt7621-pci 1e140000.pcie: PCI coherence region base: 0x60000000, mask/settings: 0xf0000002
- [ 3.311216] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00
- [ 3.323886] pci_bus 0000:00: root bus resource [io 0x1e160000-0x1e16ffff]
- [ 3.337571] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
- [ 3.351255] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 3.362214] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
- [ 3.374205] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
- [ 3.386687] pci 0000:00:00.0: reg 0x14: [mem 0x60200000-0x6020ffff]
- [ 3.399227] pci 0000:00:00.0: supports D1
- [ 3.407207] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
- [ 3.419044] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
- [ 3.431033] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
- [ 3.443516] pci 0000:00:01.0: reg 0x14: [mem 0x60210000-0x6021ffff]
- [ 3.456045] pci 0000:00:01.0: supports D1
- [ 3.464023] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
- [ 3.477095] pci 0000:01:00.0: [14c3:7615] type 00 class 0x000280
- [ 3.489113] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
- [ 3.502789] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
- [ 3.531712] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
- [ 3.542130] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff]
- [ 3.554261] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
- [ 3.567778] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
- [ 3.581156] pci 0000:02:00.0: [14c3:7603] type 00 class 0x028000
- [ 3.593166] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
- [ 3.605774] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
- [ 3.619322] pci 0000:00:01.0: PCI bridge to [bus 02-ff]
- [ 3.629735] pci 0000:00:01.0: bridge window [io 0x0000-0x0fff]
- [ 3.641869] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
- [ 3.655394] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
- [ 3.668610] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
- [ 3.681775] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
- [ 3.695637] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
- [ 3.708801] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
- [ 3.722662] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
- [ 3.736175] pci 0000:00:01.0: BAR 8: assigned [mem 0x60100000-0x601fffff]
- [ 3.749687] pci 0000:00:00.0: BAR 1: assigned [mem 0x60200000-0x6020ffff]
- [ 3.763208] pci 0000:00:01.0: BAR 1: assigned [mem 0x60210000-0x6021ffff]
- [ 3.776722] pci 0000:00:00.0: BAR 7: assigned [io 0x1e160000-0x1e160fff]
- [ 3.790239] pci 0000:00:01.0: BAR 7: assigned [io 0x1e161000-0x1e161fff]
- [ 3.803766] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
- [ 3.818325] pci 0000:00:00.0: PCI bridge to [bus 01]
- [ 3.828206] pci 0000:00:00.0: bridge window [io 0x1e160000-0x1e160fff]
- [ 3.841717] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
- [ 3.855239] pci 0000:02:00.0: BAR 0: assigned [mem 0x60100000-0x601fffff]
- [ 3.868753] pci 0000:00:01.0: PCI bridge to [bus 02]
- [ 3.878634] pci 0000:00:01.0: bridge window [io 0x1e161000-0x1e161fff]
- [ 3.892152] pci 0000:00:01.0: bridge window [mem 0x60100000-0x601fffff]
- [ 3.907005] UBI: auto-attach mtd3
- [ 3.913655] ubi0: attaching mtd3
- [ 3.920378] mt7530 mdio-bus:1f: Link is Up - 1Gbps/Full - flow control off
- [ 4.329195] ubi0: scanning is finished
- [ 4.352989] ubi0: attached mtd3 (name "ubi", size 40 MiB)
- [ 4.363770] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
- [ 4.377450] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
- [ 4.390960] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
- [ 4.404815] ubi0: good PEBs: 320, bad PEBs: 0, corrupted PEBs: 0
- [ 4.416765] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
- [ 4.431135] ubi0: max/mean erase counter: 2/0, WL threshold: 4096, image sequence number: 1618997470
- [ 4.449314] ubi0: available PEBs: 0, total reserved PEBs: 320, PEBs reserved for bad PEB handling: 20
- [ 4.467690] ubi0: background thread "ubi_bgt0d" started, PID 457
- [ 4.471678] block ubiblock0_0: created from ubi0:0(rootfs)
- [ 4.490614] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
- [ 4.504476] hctosys: unable to open rtc device (rtc0)
- [ 4.520392] VFS: Mounted root (squashfs filesystem) readonly on device 259:0.
- [ 4.538881] Freeing unused kernel memory: 1232K
- [ 4.547926] This architecture does not have kernel memory protection.
- [ 4.560739] Run /sbin/init as init process
- [ 5.102740] init: Console is alive
- [ 5.109736] init: - watchdog -
- [ 5.877641] kmodloader: loading kernel modules from /etc/modules-boot.d/*
- [ 5.979091] usbcore: registered new interface driver usbfs
- [ 5.990146] usbcore: registered new interface driver hub
- [ 6.000839] usbcore: registered new device driver usb
- [ 6.020681] xhci-mtk 1e1c0000.xhci: 1e1c0000.xhci supply vusb33 not found, using dummy regulator
- [ 6.038451] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
- [ 6.049071] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 1
- [ 6.072232] xhci-mtk 1e1c0000.xhci: hcc params 0x01401198 hci version 0x96 quirks 0x0000000000290010
- [ 6.090498] xhci-mtk 1e1c0000.xhci: irq 20, io mem 0x1e1c0000
- [ 6.103228] hub 1-0:1.0: USB hub found
- [ 6.110769] hub 1-0:1.0: 2 ports detected
- [ 6.119442] xhci-mtk 1e1c0000.xhci: xHCI Host Controller
- [ 6.130055] xhci-mtk 1e1c0000.xhci: new USB bus registered, assigned bus number 2
- [ 6.144974] xhci-mtk 1e1c0000.xhci: Host supports USB 3.0 SuperSpeed
- [ 6.157848] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 6.174844] hub 2-0:1.0: USB hub found
- [ 6.182405] hub 2-0:1.0: 1 port detected
- [ 6.196105] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
- [ 6.212435] init: - preinit -
- [ 6.861938] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
- [ 6.878063] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
- [ 6.894906] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 7.043437] random: jshn: uninitialized urandom read (4 bytes read)
- [ 7.113786] random: jshn: uninitialized urandom read (4 bytes read)
- [ 7.158279] random: jshn: uninitialized urandom read (4 bytes read)
- [ 7.388084] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode
- [ 7.401727] 8021q: adding VLAN 0 to HW filter on device lan1
- [ 10.512584] mt7530 mdio-bus:1f lan1: Link is Up - 1Gbps/Full - flow control rx/tx
- [ 10.527535] IPv6: ADDRCONF(NETDEV_CHANGE): lan1: link becomes ready
- [ 11.595864] UBIFS (ubi0:1): Mounting in unauthenticated mode
- [ 11.607353] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 592
- [ 11.688388] UBIFS (ubi0:1): recovery needed
- [ 11.845607] UBIFS (ubi0:1): recovery completed
- [ 11.854626] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
- [ 11.870215] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
- [ 11.889954] UBIFS (ubi0:1): FS size: 32759808 bytes (31 MiB, 258 LEBs), journal size 1650688 bytes (1 MiB, 13 LEBs)
- [ 11.910726] UBIFS (ubi0:1): reserved for root: 1547326 bytes (1511 KiB)
- [ 11.923907] UBIFS (ubi0:1): media format: w5/r0 (latest is w5/r0), UUID 8B88C289-5B8A-4D33-86C0-66D642CF4EE9, small LPT model
- [ 11.959765] mount_root: switching to ubifs overlay
- [ 11.986360] urandom-seed: Seeding with /etc/urandom.seed
- [ 12.093917] mt7530 mdio-bus:1f lan1: Link is Down
- [ 12.118150] procd: - early -
- [ 12.124008] procd: - watchdog -
- [ 12.712261] procd: - watchdog -
- [ 12.719167] procd: - ubus -
- [ 12.830162] procd: - init -
- [ 13.410455] kmodloader: loading kernel modules from /etc/modules.d/*
- [ 13.437239] Loading modules backported from Linux version v5.10.16-0-gde53befa79cf
- [ 13.452358] Backport generated by backports.git v5.10.16-1-0-g21d2a1d2
- [ 13.482821] xt_time: kernel timezone is -0000
- [ 13.538918] mt7621-pci 1e140000.pcie: bus=2 slot=1 irq=24
- [ 13.542961] urngd: v1.0.2 started.
- [ 13.549828] pci 0000:00:01.0: enabling device (0006 -> 0007)
- [ 13.567713] mt7603e 0000:02:00.0: enabling device (0000 -> 0002)
- [ 13.579855] mt7603e 0000:02:00.0: ASIC revision: 76030010
- [ 13.592611] mt7603e 0000:02:00.0: Invalid MAC address, using random address 26:94:31:cc:9d:cb
- [ 13.688944] random: crng init done
- [ 13.695737] random: 7 urandom warning(s) missed due to ratelimiting
- [ 14.633328] mt7603e 0000:02:00.0: Firmware Version: ap_pcie
- [ 14.644451] mt7603e 0000:02:00.0: Build Time: 20160107100755
- [ 14.692088] mt7603e 0000:02:00.0: firmware init done
- [ 14.863594] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
- [ 14.876107] mt7621-pci 1e140000.pcie: bus=1 slot=0 irq=23
- [ 14.886973] pci 0000:00:00.0: enabling device (0006 -> 0007)
- [ 14.898311] mt7615e 0000:01:00.0: enabling device (0000 -> 0002)
- [ 14.925677] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
- [ 14.948471] PPP generic driver version 2.4.2
- [ 14.960194] NET: Registered protocol family 24
- [ 14.992135] kmodloader: done loading kernel modules from /etc/modules.d/*
- [ 15.034381] mt7615e 0000:01:00.0: HW/SW Version: 0x8a108a10, Build Time: 20180518100604a
- [ 15.034381]
- [ 15.342031] mt7615e 0000:01:00.0: N9 Firmware Version: _reserved_, Build Time: 20200814163649
- [ 15.398182] mt7615e 0000:01:00.0: CR4 Firmware Version: _reserved_, Build Time: 20190121161307
- [ 19.989850] mtk_soc_eth 1e100000.ethernet eth0: Link is Down
- [ 20.011044] mtk_soc_eth 1e100000.ethernet eth0: configuring for fixed/rgmii link mode
- [ 20.027203] mtk_soc_eth 1e100000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
- [ 20.031749] mt7530 mdio-bus:1f lan1: configuring for phy/gmii link mode
- [ 20.058215] 8021q: adding VLAN 0 to HW filter on device lan1
- [ 20.074905] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 20.089010] br-lan: port 1(lan1) entered blocking state
- [ 20.099532] br-lan: port 1(lan1) entered disabled state
- [ 20.110961] device lan1 entered promiscuous mode
- [ 20.120649] device eth0 entered promiscuous mode
- [ 20.151143] mt7530 mdio-bus:1f lan2: configuring for phy/gmii link mode
- [ 20.165641] 8021q: adding VLAN 0 to HW filter on device lan2
- [ 20.180202] br-lan: port 2(lan2) entered blocking state
- [ 20.190807] br-lan: port 2(lan2) entered disabled state
- [ 20.202755] device lan2 entered promiscuous mode
- [ 20.222935] mt7530 mdio-bus:1f lan3: configuring for phy/gmii link mode
- [ 20.236881] 8021q: adding VLAN 0 to HW filter on device lan3
- [ 20.251400] br-lan: port 3(lan3) entered blocking state
- [ 20.261879] br-lan: port 3(lan3) entered disabled state
- [ 20.273570] device lan3 entered promiscuous mode
- [ 20.293702] mt7530 mdio-bus:1f lan4: configuring for phy/gmii link mode
- [ 20.307696] 8021q: adding VLAN 0 to HW filter on device lan4
- [ 20.322455] br-lan: port 4(lan4) entered blocking state
- [ 20.332988] br-lan: port 4(lan4) entered disabled state
- [ 20.344903] device lan4 entered promiscuous mode
- [ 20.367515] mt7530 mdio-bus:1f wan: configuring for phy/gmii link mode
- [ 20.381039] 8021q: adding VLAN 0 to HW filter on device wan
- [ 21.765304] br-lan: port 5(wlan0) entered blocking state
- [ 21.775997] br-lan: port 5(wlan0) entered disabled state
- [ 21.787250] device wlan0 entered promiscuous mode
- [ 22.095237] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 22.108276] br-lan: port 5(wlan0) entered blocking state
- [ 22.118969] br-lan: port 5(wlan0) entered forwarding state
- [ 22.131252] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
- [ 23.234359] mt7530 mdio-bus:1f lan1: Link is Up - 1Gbps/Full - flow control rx/tx
- [ 24.444164] br-lan: port 1(lan1) entered blocking state
- [ 24.454611] br-lan: port 1(lan1) entered forwarding state
- [ 24.466916] br-lan: port 6(wlan1) entered blocking state
- [ 24.477759] br-lan: port 6(wlan1) entered disabled state
- [ 24.488792] device wlan1 entered promiscuous mode
- [ 91.085476] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
- [ 91.098374] br-lan: port 6(wlan1) entered blocking state
- [ 91.108984] br-lan: port 6(wlan1) entered forwarding state
- [ 146.416340] device wlan1 left promiscuous mode
- [ 146.425428] br-lan: port 6(wlan1) entered disabled state
- [ 147.560493] br-lan: port 6(wlan1) entered blocking state
- [ 147.571197] br-lan: port 6(wlan1) entered disabled state
- [ 147.582655] device wlan1 entered promiscuous mode
- [ 147.592623] br-lan: port 6(wlan1) entered blocking state
- [ 147.603272] br-lan: port 6(wlan1) entered forwarding state
- [ 147.732516] br-lan: port 6(wlan1) entered disabled state
- [ 148.197362] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
- [ 148.210299] br-lan: port 6(wlan1) entered blocking state
- [ 148.220913] br-lan: port 6(wlan1) entered forwarding state
- [ 197.436469] device wlan1 left promiscuous mode
- [ 197.445617] br-lan: port 6(wlan1) entered disabled state
- [ 198.661514] br-lan: port 6(wlan1) entered blocking state
- [ 198.672350] br-lan: port 6(wlan1) entered disabled state
- [ 198.683556] device wlan1 entered promiscuous mode
- [ 198.693264] br-lan: port 6(wlan1) entered blocking state
- [ 198.703912] br-lan: port 6(wlan1) entered forwarding state
- [ 198.812318] br-lan: port 6(wlan1) entered disabled state
- [ 199.300243] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
- [ 199.313221] br-lan: port 6(wlan1) entered blocking state
- [ 199.323843] br-lan: port 6(wlan1) entered forwarding state
- [25184.174892] device wlan1 left promiscuous mode
- [25184.183977] br-lan: port 6(wlan1) entered disabled state
- [25185.131438] br-lan: port 6(wlan1) entered blocking state
- [25185.142088] br-lan: port 6(wlan1) entered disabled state
- [25185.153361] device wlan1 entered promiscuous mode
- [25185.163171] br-lan: port 6(wlan1) entered blocking state
- [25185.173848] br-lan: port 6(wlan1) entered forwarding state
- [25185.295383] br-lan: port 6(wlan1) entered disabled state
- [25185.764574] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
- [25185.777490] br-lan: port 6(wlan1) entered blocking state
- [25185.788089] br-lan: port 6(wlan1) entered forwarding state
- [44079.788690] Rekeying PTK for STA [REDACTED MAC] but driver can't safely do that.
- [51003.624681] Rekeying PTK for STA [REDACTED MAC] but driver can't safely do that.
- [52435.773565] Rekeying PTK for STA [REDACTED MAC] but driver can't safely do that.
- [53073.131517] Rekeying PTK for STA [REDACTED MAC] but driver can't safely do that.
- [53193.069952] Rekeying PTK for STA [REDACTED MAC] but driver can't safely do that.
- [53642.812612] Rekeying PTK for STA [REDACTED MAC] but driver can't safely do that.
- [57310.439929] Rekeying PTK for STA [REDACTED MAC] but driver can't safely do that.
- [102782.964399] Rekeying PTK for STA [REDACTED MAC] but driver can't safely do that.
- [123460.968319] Rekeying PTK for STA [REDACTED MAC] but driver can't safely do that.
- [124707.867559] Rekeying PTK for STA [REDACTED MAC] but driver can't safely do that.
- [126564.354273] Rekeying PTK for STA [REDACTED MAC] but driver can't safely do that.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement