API tools faq
paste
Advertisement
Guest User

debian stretch ix2-dl serial bootlog

a guest
Jun 5th, 2017
840
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 18.29 KB | None | 0 0
raw download clone embed print report
  1. __ __ _ _
  2. | \/ | __ _ _ ____ _____| | |
  3. | |\/| |/ _` | '__\ \ / / _ \ | |
  4. | | | | (_| | | \ V / __/ | |
  5. |_| |_|\__,_|_| \_/ \___|_|_|
  6. _ _ ____ _
  7. | | | | | __ ) ___ ___ | |_
  8. | | | |___| _ \ / _ \ / _ \| __|
  9. | |_| |___| |_) | (_) | (_) | |_
  10. \___/ |____/ \___/ \___/ \__| ** ix2-nand ** ** uboot_ver:0.0.8 **
  11.  
  12. ** MARVELL BOARD: DB-88F6282A-BP LE
  13.  
  14. U-Boot 1.1.4 (Oct 28 2011 - 15:19:29) Marvell version: 3.6.1 - EMC
  15.  
  16. U-Boot code: 00600000 -> 0067FFF0 BSS: -> 006CFB00
  17.  
  18. Soc: 88F6282 A1 CPU running @ 1600Mhz L2 running @ 533Mhz
  19. SysClock = 533Mhz , TClock = 200Mhz
  20.  
  21. DRAM (DDR3) CAS Latency = 7 tRP = 7 tRAS = 20 tRCD=7
  22. DRAM CS[0] base 0x00000000 size 256MB
  23. DRAM Total size 256MB 16bit width
  24. Addresses 8M - 0M are saved for the U-Boot usage.
  25. Mem malloc Initialization (8M - 7M): Done
  26. NAND:1024 MB
  27. Found ADT7473, program PWM1 ... OK
  28. Flash: 0 kB
  29.  
  30. Marvell Serial ATA Adapter
  31. Integrated Sata device found
  32.  
  33.  
  34. CPU : Marvell Feroceon (Rev 1)
  35. Found kernel at 0x100000
  36. Found initrd at 0x400000
  37.  
  38. Streaming disabled
  39. Write allocate disabled
  40.  
  41.  
  42. USB 0: host mode
  43. PEX 0: interface detected no Link.
  44. PEX 1: interface detected no Link.
  45. Net: egiga0 [PRIME]
  46. Hit any key to stop autoboot: 0
  47. (Re)start USB...
  48. USB: scanning bus for devices... 3 USB Device(s) found
  49. Waiting for storage device(s) to settle before scanning...
  50. 1 Storage Device(s) found
  51. reading /uImage
  52. .................................................................................................................................................
  53.  
  54. 3507243 bytes read
  55. reading /uInitrd
  56. .................................................................................................................................................
  57.  
  58. 7207734 bytes read
  59. ## Booting image at 00800000 ...
  60. Image Name: vmlinuz-4.11.3-kirkwood-tld-1
  61. Created: 2017-06-05 13:09:27 UTC
  62. Image Type: ARM Linux Kernel Image (uncompressed)
  63. Data Size: 3507179 Bytes = 3.3 MB
  64. Load Address: 00008000
  65. Entry Point: 00008000
  66. Verifying Checksum ... OK
  67. OK
  68. ## Loading Ramdisk Image at 01100000 ...
  69. Image Name: initrd.img-4.11.3-kirkwood-tld-1
  70. Created: 2017-06-05 13:09:55 UTC
  71. Image Type: ARM Linux RAMDisk Image (gzip compressed)
  72. Data Size: 7207670 Bytes = 6.9 MB
  73. Load Address: 00000000
  74. Entry Point: 00000000
  75. Verifying Checksum ... OK
  76.  
  77. Starting kernel ...
  78.  
  79. [ 0.000000] Booting Linux on physical CPU 0x0
  80. [ 0.000000] Linux version 4.11.3-kirkwood-tld-1 (root@tldDebian) (gcc version 4.9.2 (Debian 4.9.2-10) ) #2 PREEMPT Mon May 29 12:09:15 PDT 207
  81. [ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=0005397f
  82. [ 0.000000] CPU: VIVT data cache, VIVT instruction cache
  83. [ 0.000000] OF: fdt: Machine model: Lenovo IX2-ng
  84. [ 0.000000] Memory policy: Data cache writeback
  85. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 65024
  86. [ 0.000000] Kernel command line: console=ttyS0,115200 root=LABEL=rootfs rootfstype=ext4 mtdparts=orion_nand:0x100000@0(uboot)ro,0x20000@0xA00)
  87. [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
  88. [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
  89. [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
  90. [ 0.000000] Memory: 240496K/262144K available (7168K kernel code, 677K rwdata, 1844K rodata, 1024K init, 280K bss, 21648K reserved, 0K cma-re)
  91. [ 0.000000] Virtual kernel memory layout:
  92. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  93. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  94. [ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB)
  95. [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
  96. [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
  97. [ 0.000000] .text : 0xc0008000 - 0xc0800000 (8160 kB)
  98. [ 0.000000] .init : 0xc0b00000 - 0xc0c00000 (1024 kB)
  99. [ 0.000000] .data : 0xc0c00000 - 0xc0ca954c ( 678 kB)
  100. [ 0.000000] .bss : 0xc0ca954c - 0xc0cef6e0 ( 281 kB)
  101. [ 0.000000] Preemptible hierarchical RCU implementation.
  102. [ 0.000000] Build-time adjustment of leaf fanout to 32.
  103. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  104. [ 0.000000] clocksource: orion_clocksource: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
  105. [ 0.000006] sched_clock: 32 bits at 200MHz, resolution 5ns, wraps every 10737418237ns
  106. [ 0.000379] Console: colour dummy device 80x30
  107. [ 0.000405] Calibrating delay loop... 1587.60 BogoMIPS (lpj=7938048)
  108. [ 0.090081] pid_max: default: 32768 minimum: 301
  109. [ 0.090226] Security Framework initialized
  110. [ 0.090320] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  111. [ 0.090334] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  112. [ 0.091003] CPU: Testing write buffer coherency: ok
  113. [ 0.091779] Setting up static identity map for 0x100000 - 0x100058
  114. [ 0.091976] mvebu-soc-id: MVEBU SoC ID=0x6282, Rev=0x1
  115. [ 0.094362] devtmpfs: initialized
  116. [ 0.098057] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  117. [ 0.098078] futex hash table entries: 256 (order: -1, 3072 bytes)
  118. [ 0.098320] prandom: seed boundary self test passed
  119. [ 0.101181] prandom: 100 self tests passed
  120. [ 0.101193] pinctrl core: initialized pinctrl subsystem
  121. [ 0.102106] NET: Registered protocol family 16
  122. [ 0.102427] DMA: preallocated 256 KiB pool for atomic coherent allocations
  123. [ 0.103654] cpuidle: using governor ladder
  124. [ 0.103707] cpuidle: using governor menu
  125. [ 0.104024] Feroceon L2: Enabling L2
  126. [ 0.104057] Feroceon L2: Cache support initialised.
  127. [ 0.104330] [Firmware Info]: /ocp@f1000000/ethernet-controller@72000/ethernet0-port@0: local-mac-address is not set
  128. [ 0.108641] No ATAGs?
  129. [ 0.115469] vgaarb: loaded
  130. [ 0.115709] SCSI subsystem initialized
  131. [ 0.116090] usbcore: registered new interface driver usbfs
  132. [ 0.116149] usbcore: registered new interface driver hub
  133. [ 0.116201] usbcore: registered new device driver usb
  134. [ 0.117048] clocksource: Switched to clocksource orion_clocksource
  135. [ 0.169310] VFS: Disk quotas dquot_6.6.0
  136. [ 0.169379] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  137. [ 0.177464] NET: Registered protocol family 2
  138. [ 0.178063] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
  139. [ 0.178098] TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
  140. [ 0.178127] TCP: Hash tables configured (established 2048 bind 2048)
  141. [ 0.178193] UDP hash table entries: 256 (order: 0, 4096 bytes)
  142. [ 0.178214] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  143. [ 0.178352] NET: Registered protocol family 1
  144. [ 0.178682] RPC: Registered named UNIX socket transport module.
  145. [ 0.178691] RPC: Registered udp transport module.
  146. [ 0.178697] RPC: Registered tcp transport module.
  147. [ 0.178703] RPC: Registered tcp NFSv4.1 backchannel transport module.
  148. [ 0.178928] Unpacking initramfs...
  149. [ 0.662603] Freeing initrd memory: 7040K
  150. [ 0.662709] NetWinder Floating Point Emulator V0.97 (double precision)
  151. [ 0.663495] audit: initializing netlink subsys (disabled)
  152. [ 0.663845] Initialise system trusted keyrings
  153. [ 0.663942] audit: type=2000 audit(0.650:1): state=initialized audit_enabled=0 res=1
  154. [ 0.664004] workingset: timestamp_bits=30 max_order=16 bucket_order=0
  155. [ 0.664060] zbud: loaded
  156. [ 0.664811] NFS: Registering the id_resolver key type
  157. [ 0.664831] Key type id_resolver registered
  158. [ 0.664837] Key type id_legacy registered
  159. [ 0.664851] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  160. [ 0.664858] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  161. [ 0.665003] jffs2: version 2.2. (NAND) (SUMMARY) �© 2001-2006 Red Hat, Inc.
  162. [ 0.665291] orangefs_debugfs_init: called with debug mask: :none: :0:
  163. [ 0.665451] orangefs_init: module version upstream loaded
  164. [ 2.557054] random: fast init done
  165. [ 3.727844] Key type asymmetric registered
  166. [ 3.727856] Asymmetric key parser 'x509' registered
  167. [ 3.727910] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
  168. [ 3.727918] io scheduler noop registered
  169. [ 3.727925] io scheduler deadline registered
  170. [ 3.727979] io scheduler cfq registered (default)
  171. [ 3.728914] kirkwood-pinctrl f1010000.pin-controller: registered pinctrl driver
  172. [ 3.730309] mv_xor f1060800.xor: Marvell shared XOR driver
  173. [ 3.787629] mv_xor f1060800.xor: Marvell XOR (Registers Mode): ( xor cpy sg intr )
  174. [ 3.787817] mv_xor f1060900.xor: Marvell shared XOR driver
  175. [ 3.847633] mv_xor f1060900.xor: Marvell XOR (Registers Mode): ( xor cpy sg intr )
  176. [ 3.847994] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  177. [ 3.848990] console [ttyS0] disabled
  178. [ 3.849042] f1012100.serial: ttyS0 at MMIO 0xf1012100 (irq = 27, base_baud = 12500000) is a 16550A
  179. [ 4.428529] console [ttyS0] enabled
  180. [ 4.432783] sata_mv f1080000.sata: slots 32 ports 2
  181. [ 4.439822] scsi host0: sata_mv
  182. [ 4.443314] scsi host1: sata_mv
  183. [ 4.446663] ata1: SATA max UDMA/133 irq 34
  184. [ 4.450816] ata2: SATA max UDMA/133 irq 34
  185. [ 4.456165] m25p80 spi0.0: unrecognized JEDEC id bytes: 00, 00, 00
  186. [ 4.463176] libphy: Fixed MDIO Bus: probed
  187. [ 4.468038] libphy: orion_mdio_bus: probed
  188. [ 4.472841] mv643xx_eth: MV-643xx 10/100/1000 ethernet driver version 1.4
  189. [ 4.577997] mv643xx_eth_port mv643xx_eth_port.0 eth0: port 0 with MAC address 00:d0:b8:15:56:df
  190. [ 4.586819] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  191. [ 4.593411] ehci-pci: EHCI PCI platform driver
  192. [ 4.597927] ehci-orion: EHCI orion driver
  193. [ 4.602087] orion-ehci f1050000.ehci: EHCI Host Controller
  194. [ 4.607635] orion-ehci f1050000.ehci: new USB bus registered, assigned bus number 1
  195. [ 4.615467] orion-ehci f1050000.ehci: irq 31, io mem 0xf1050000
  196. [ 4.647075] orion-ehci f1050000.ehci: USB 2.0 started, EHCI 1.00
  197. [ 4.653296] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  198. [ 4.660137] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  199. [ 4.667442] usb usb1: Product: EHCI Host Controller
  200. [ 4.672339] usb usb1: Manufacturer: Linux 4.11.3-kirkwood-tld-1 ehci_hcd
  201. [ 4.679102] usb usb1: SerialNumber: f1050000.ehci
  202. [ 4.684329] hub 1-0:1.0: USB hub found
  203. [ 4.688163] hub 1-0:1.0: 1 port detected
  204. [ 4.692736] mousedev: PS/2 mouse device common for all mice
  205. [ 4.698813] rtc-mv f1010300.rtc: rtc core: registered f1010300.rtc as rtc0
  206. [ 4.705850] i2c /dev entries driver
  207. [ 4.711293] hidraw: raw HID events driver (C) Jiri Kosina
  208. [ 4.716997] drop_monitor: Initializing network drop monitor service
  209. [ 4.723516] NET: Registered protocol family 17
  210. [ 4.728148] Key type dns_resolver registered
  211. [ 4.733058] registered taskstats version 1
  212. [ 4.737200] Loading compiled-in X.509 certificates
  213. [ 4.742072] zswap: loaded using pool lzo/zbud
  214. [ 4.748214] Key type big_key registered
  215. [ 4.753489] Key type encrypted registered
  216. [ 4.758597] rtc-mv f1010300.rtc: setting system clock to 2017-06-05 14:18:02 UTC (1496672282)
  217. [ 4.777361] ata1: SATA link down (SStatus 0 SControl F300)
  218. [ 5.047070] usb 1-1: new high-speed USB device number 2 using orion-ehci
  219. [ 5.119670] ata2: SATA link down (SStatus 0 SControl F300)
  220. [ 5.138190] Freeing unused kernel memory: 1024K
  221. Loading, please wait...
  222. [ 5.207752] systemd-udevd[99]: starting version 215
  223. [ 5.238495] usb 1-1: New USB device found, idVendor=14cd, idProduct=8601
  224. [ 5.245243] usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
  225. [ 5.277140] usb 1-1: Product: USB 2.0 Hub
  226. [ 5.282216] usb 1-1: Manufacturer: USB Device
  227. [ 5.297712] hub 1-1:1.0: USB hub found
  228. [ 5.306019] hub 1-1:1.0: 4 ports detected
  229. Begin: Loading essential drivers ... done.
  230. Begin: Running /scripts/init-premount ... done.
  231. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
  232. Begin: Running /scripts/local-premount ... done.
  233. Begin: Waiting for root file system ... [ 5.627078] usb 1-1.2: new high-speed USB device number 3 using orion-ehci
  234. [ 5.778979] usb 1-1.2: New USB device found, idVendor=8564, idProduct=1000
  235. [ 5.785893] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  236. [ 5.793264] usb 1-1.2: Product: Mass Storage Device
  237. [ 5.798174] usb 1-1.2: Manufacturer: JetFlash
  238. [ 5.802547] usb 1-1.2: SerialNumber: 21KF3NANJ6JXC0F4
  239. [ 5.815024] usb-storage 1-1.2:1.0: USB Mass Storage device detected
  240. [ 5.821688] scsi host2: usb-storage 1-1.2:1.0
  241. [ 5.827463] usbcore: registered new interface driver usb-storage
  242. [ 5.835767] usbcore: registered new interface driver uas
  243. Begin: Running /scripts/local-block ... done.
  244. [ 7.130305] scsi 2:0:0:0: Direct-Access JetFlash Transcend 16GB 1100 PQ: 0 ANSI: 4
  245. [ 7.145037] sd 2:0:0:0: [sda] 30867456 512-byte logical blocks: (15.8 GB/14.7 GiB)
  246. [ 7.153759] sd 2:0:0:0: [sda] Write Protect is off
  247. [ 7.159249] sd 2:0:0:0: [sda] No Caching mode page found
  248. [ 7.164598] sd 2:0:0:0: [sda] Assuming drive cache: write through
  249. [ 7.175710] sda: sda1 sda2 sda3
  250. [ 7.182378] sd 2:0:0:0: [sda] Attached SCSI removable disk
  251. [ 7.190951] sd 2:0:0:0: Attached scsi generic sg0 type 0
  252. Begin: Running /scripts/local-block ... done.
  253. done.
  254. Begin: Checking root file system ... fsck from util-linux 2.25.2
  255. fsck: error 2 (No such file or directory) while executing fsck.ext4 for /dev/sda3
  256. fsck exited with status code 8
  257. done.
  258. Warning: File system check failed but did not detect errors
  259. [ 12.655805] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
  260. done.
  261. Begin: Running /scripts/local-bottom ... done.
  262. Begin: Running /scripts/init-bottom ... done.
  263. INIT: version 2.88 booting
  264. [info] Using makefile-style concurrent boot in runlevel S.
  265. [....] Starting the hotplug events dispatcher: systemd-udevdstarting version 232
  266. . ok
  267. [....] Synthesizing the initial hotplug events...[ 14.217365] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  268. done.
  269. [....] Waiting for /dev to be fully populated...[ 14.317675] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver.
  270. [ 14.428823] adt7475 0-002e: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
  271. [ 14.484450] orion_wdt: Initial timeout 21 sec
  272. [ 14.491594] adt7475 0-002e: ADT7473 device, revision 0
  273. [ 14.491601] adt7475 0-002e: Optional features: fan4 pwm2
  274. [ 14.636993] marvell-cesa f1030000.crypto: CESA device successfully registered
  275. done.
  276. [....] Activating swap...[ 15.392386] Adding 262140k swap on /dev/sda2. Priority:-1 extents:1 across:262140k FS
  277. done.
  278. [ 15.492285] EXT4-fs (sda3): re-mounted. Opts: (null)
  279. [....] Checking root file system...fsck from util-linux 2.29.2
  280. rootfs: clean, 36928/932064 files, 250026/3727104 blocks
  281. done.
  282. [ 15.672814] EXT4-fs (sda3): re-mounted. Opts: (null)
  283. [....] Activating lvm and md swap...done.
  284. [....] Checking file systems...fsck from util-linux 2.29.2
  285. done.
  286. [....] Cleaning up temporary files... /tmp. ok
  287. [....] Mounting local filesystem[ 18.098916] random: crng init done
  288. s...done.
  289. [....] Activating swapfile swap...done.
  290. [....] Cleaning up temporary files.... ok
  291. [....] Setting kernel variables...done.
  292. [....] Configuring network interfaces...Internet Systems Consortium DHCP Client 4.3.5
  293. Copyright 2004-2016 Internet Systems Consortium.
  294. All rights reserved.
  295. For info, please visit https://www.isc.org/software/dhcp/
  296.  
  297. Listening on LPF/eth0/00:d0:b8:15:56:df
  298. Sending on LPF/eth0/00:d0:b8:15:56:df
  299. Sending on Socket/fallback
  300. DHCPDISCOVER on eth0[ 21.657698] mv643xx_eth_port mv643xx_eth_port.0 eth0: link up, 1000 Mb/s, full duplex, flow control disabled
  301. to 255.255.255.255 port 67 interval 5
  302. DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 13
  303. DHCPREQUEST of 192.168.178.152 on eth0 to 255.255.255.255 port 67
  304. DHCPOFFER of 192.168.178.152 from 192.168.178.1
  305. DHCPACK of 192.168.178.152 from 192.168.178.1
  306. invoke-rc.d: could not determine current runlevel
  307. bound to 192.168.178.152 -- renewal in 352316 seconds.
  308. done.
  309. [....] Starting RPC port mapper daemon: rpcbind. ok
  310. [....] Starting NFS common utilities: statd idmapd. ok
  311. [....] Cleaning up temporary files.... ok
  312. INIT: Entering runlevel: 2
  313. [info] Using makefile-style concurrent boot in runlevel 2.
  314. [....] Starting NFS common utilities: statd idmapd. ok
  315. [....] Starting system logging: syslog-ng. ok
  316. [....] Starting system message bus: dbus. ok
  317. [....] Not starting NFS kernel daemon: no exports. ... (warning).
  318. [....] Starting Avahi mDNS/DNS-SD Daemon: avahi-daemon. ok
  319. [....] Starting OpenBSD Secure Shell server: sshd. ok
  320. [....] Starting NTP server: ntpd. ok
  321.  
  322. Debian GNU/Linux 9 debian ttyS0
  323.  
  324. IN[info] Using makefile-style concurrent boot in runlevel 0.
  325. [....] Stopping Avahi mDNS/DNS-SD Daemon: avahi-daemon. ok
  326. [....] Stopping NFS kernel daemon: mountd nfsd. ok
  327. [....] Unexporting directories for NFS kernel daemon.... ok
  328. [....] Stopping system logging: syslog-ng. ok
  329. [....] Asking all remaining processes to terminate...done.
  330. [....] All processes ended within 1 seconds...done.
  331. [....] Stopping NFS common utilities: idmapd statd. ok
  332. [....] Stopping RPC port mapper daemon: rpcbind. ok
  333. [info] Saving the system clock.
  334. [info] Hardware Clock updated to Mon Jun 5 16:19:09 CEST 2017.
  335. [....] Deconfiguring network interfaces...Removed stale PID file
  336. Internet Systems Consortium DHCP Client 4.3.5
  337. Copyright 2004-2016 Internet Systems Consortium.
  338. All rights reserved.
  339. For info, please visit https://www.isc.org/software/dhcp/
  340.  
  341. Listening on LPF/eth0/00:d0:b8:15:56:df
  342. Sending on LPF/eth0/00:d0:b8:15:56:df
  343. Sending on Socket/fallback
  344. DHCPRELEASE on eth0 to 192.168.178.1 port 67
  345. invoke-rc.d: -----------------------------------------------------
  346. invoke-rc.d: WARNING: 'invoke-rc.d ntp try-restart' called
  347. invoke-rc.d: during shutdown sequence.
  348. invoke-rc.d: enabling safe mode: initscript policy layer disabled
  349. invoke-rc.d: -----------------------------------------------------
  350. done.
  351. [....] Unmounting temporary filesystems...done.
  352. [....] Deactivating swap...done.
  353. [ 81.554048] EXT4-fs (sda3): re-mounted. Opts: (null)
  354. [info] Will now halt.
  355. logger: socket /dev/log: Connection refused
  356. [ 83.655088] reboot: Power down
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!