Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- <6>[ 0.033134] c0 1 early rtb size: 0x100000
- <6>[ 0.033146] c0 1 early rtb phys: 0x83700000
- <6>[ 0.043533] c2 1 DMI not present or invalid.
- <6>[ 0.055895] c2 1 pinctrl core: initialized pinctrl subsystem
- <6>[ 0.056367] c2 1 regulator-dummy: no parameters
- <6>[ 0.163189] c2 1 console [bootmsg-1] enabled
- <6>[ 0.163627] c2 1 NET: Registered protocol family 16
- <6>[ 0.203682] c2 1 console [pstore-1] enabled
- <6>[ 0.203808] c2 1 pstore: Registered ramoops as persistent store backend
- <6>[ 0.203823] c2 1 ramoops: attached 0x100000@0x83500000, ecc: 0/0
- <6>[ 0.205349] c2 1 bootloader_log: allocate buffer for bootloader log, size: 458752
- <6>[ 0.205541] c2 1 bldr_log_parser: size 15157
- <6>[ 0.205614] c2 1 bootloader_log: allocate buffer for last bootloader log, size: 458752
- <6>[ 0.205755] c2 1 bldr_log_parser: size 11331
- <6>[ 0.213454] c3 1 cpuidle: using governor ladder
- <6>[ 0.240078] c3 1 cpuidle: using governor menu
- <6>[ 0.246785] c2 1 cpuidle: using governor qcom
- <6>[ 0.248398] c2 1 vdso: 2 pages (1 code @ ffffffc000f5e000, 1 data @ ffffffc00165c000)
- <6>[ 0.248858] c2 1 software IO TLB [mem 0xffc00000-0x100000000] (4MB) mapped at [ffffffc07fc00000-ffffffc07fffffff]
- <6>[ 0.249794] c2 1 DMA: preallocated 256 KiB pool for atomic allocations
- <4>[ 0.255703] c2 1 irq: no irq domain found for /soc/qcom,sde_kms@900000 !
- <4>[ 0.255975] c2 1 irq: no irq domain found for /soc/qcom,sde_kms@900000 !
- <4>[ 0.256639] c2 1 irq: no irq domain found for /soc/qcom,sde_kms@900000 !
- <6>[ 0.269797] c2 1 qcom,msm-apm 99e0000.apm: overriding clock sources across APM switch
- <6>[ 0.271067] c2 1 sps:sps is ready.
- <3>[ 0.275733] c2 1 cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
- <3>[ 0.344703] c2 1 smd_channel_probe_now: allocation table not initialized
- <3>[ 0.345122] c2 1 smd_channel_probe_now: allocation table not initialized
- <3>[ 0.345510] c2 1 smd_channel_probe_now: allocation table not initialized
- <3>[ 0.345903] c2 1 smd_channel_probe_now: allocation table not initialized
- <6>[ 0.346255] c2 1 msm_watchdog 9830000.qcom,wdt: wdog absent resource not present
- <6>[ 0.346602] c2 1 msm_watchdog 9830000.qcom,wdt: MSM Watchdog Initialized
- <6>[ 0.347613] c2 1 msm_rpm_dev_probe: APSS-RPM communication over GLINK
- <3>[ 0.358836] c2 1 spmi_pmic_arb 400f000.qcom,spmi: PMIC Arb Version-2 0x20010000
- <3>[ 0.360932] c2 1 spmi_pmic_arb 400f000.qcom,spmi: missing property: qcom,pmic-arb-max-periph-interrupts
- <6>[ 0.361305] c2 1 PON_PON_REASON:
- <6>[ 0.361320] c2 1 Hard Reset, (0x21)
- <6>[ 0.361332] c2 1 Pon1, (0x21)
- <6>[ 0.361343] c2 1 PON_WARM_RESET_REASON:
- <6>[ 0.361353] c2 1 PON_SOFT_RESET_REASON:
- <6>[ 0.361363] c2 1 PON_POFF_REASON:
- <6>[ 0.361374] c2 1 PS Hold, (0x2)
- <6>[ 0.368089] c2 1 pmi8994_s2: 400 <--> 1015 mV at 1000 mV normal idle
- <6>[ 0.368893] c2 1 platform 9300000.qcom,lpass: assigned reserved memory node peripheral_region@8ea00000
- <6>[ 0.369267] c2 1 platform ce0000.qcom,venus: assigned reserved memory node peripheral_region@8ea00000
- <6>[ 0.370271] c2 1 platform 1c00000.qcom,ssc: assigned reserved memory node peripheral_region@8ea00000
- <6>[ 0.370795] c2 1 platform 2080000.qcom,mss: assigned reserved memory node modem_region@88800000
- <6>[ 0.371854] c1 1 Create monitor tsense workqueue(0xffffffc0f80c2000)...
- <4>[ 0.372208] c1 13 [THERMAL] Cntl_0[0x0DE0FFF9]: (0,42.1),(1,42.7),(2,42.4),(3,44.6),(4,45.3),(5,43.3),(6,42.4),(7,44.3),(8,45.3),(9,45.9),(10,43.7),(11,43.3),(12,44.3)
- <4>[ 0.372226] c1 13 [THERMAL] tsens1_controller doesn't initialize yet
- <6>[ 0.375836] c1 1 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
- <6>[ 0.375869] c1 1 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
- <6>[ 0.375896] c1 1 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
- <6>[ 0.375916] c1 1 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
- <6>[ 0.376078] c1 1 msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
- <3>[ 0.376093] c1 1 msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
- <6>[ 0.376109] c1 1 msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
- <3>[ 0.376124] c1 1 msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
- <6>[ 0.383198] c1 1 platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
- <6>[ 0.384038] c1 1 platform soc:qcom,msm-mdsprpc-mem: assigned reserved memory node adsp_region
- <6>[ 0.389890] c2 45 msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests
- <3>[ 0.390636] c0 4 smd_channel_probe_now: allocation table not initialized
- <6>[ 0.391132] c1 1 msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L1 error interrupts
- <6>[ 0.391292] c1 1 msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L2 error interrupts
- <6>[ 0.391595] c1 1 msm_cache_erp64 6500000.qcom,cache_erp64: Registering for L3 error interrupts
- <6>[ 0.392020] c1 1 msm_m4m_erp 9a40000.qcom,m4m_erp64: Registering for M4M error interrupts
- <6>[ 0.395098] c1 1 apc0_pwrcl_mem_acc_corner: 0 <--> 0 mV
- <6>[ 0.395576] c1 1 apc1_perfcl_mem_acc_corner: 0 <--> 0 mV
- <6>[ 0.396042] c1 1 apcc_l3_mem_acc_corner: 0 <--> 0 mV
- <6>[ 0.396516] c1 1 gfx_mem_acc_corner: 0 <--> 0 mV
- <6>[ 0.397136] c1 1 kryo0-retention: 468 <--> 892 mV at 520 mV
- <6>[ 0.397432] c1 1 kryo0: 468 <--> 892 mV at 754 mV
- <6>[ 0.397637] c1 1 kryo_regulator_probe: kryo0: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=0
- <6>[ 0.398057] c1 1 kryo1-retention: 468 <--> 892 mV at 520 mV
- <6>[ 0.398330] c1 1 kryo1: 468 <--> 892 mV at 754 mV
- <6>[ 0.398531] c1 1 kryo_regulator_probe: kryo1: default LDO functional volt=754021 uV, LDO retention volt=521789 uV, Vref func=325285 + 4466*(val), cluster-num=1
- <6>[ 0.405196] c1 1 platform soc:qcom,kgsl-hyp: assigned reserved memory node peripheral_region@8ea00000
- <3>[ 0.407370] c1 1 msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
- <4>[ 0.434503] c1 1 __of_mpm_init(): MPM driver mapping exists
- <6>[ 0.435571] c1 1 platform 83cf0000.htc_radio_smem: assigned reserved memory node htc_smlog_region@0
- <6>[ 0.436062] c1 1 mnemosyne: init from device tree.
- <6>[ 0.436088] c1 1 mnemosyne size: 0x2000
- <6>[ 0.436100] c1 1 mnemosyne phys: 0x83ce0000
- <3>[ 0.440514] c3 6 cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
- <6>[ 0.441462] c3 6 pm8994_s1_corner: 0 <--> 0 mV at 0 mV normal idle
- <6>[ 0.442030] c3 6 pm8994_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
- <6>[ 0.442550] c3 6 pm8994_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
- <6>[ 0.443122] c3 6 pm8994_s2_corner: 0 <--> 0 mV at 0 mV normal idle
- <6>[ 0.443666] c3 6 pm8994_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
- <6>[ 0.444240] c3 6 pm8994_s3: 1300 mV normal idle
- <6>[ 0.444807] c3 6 pm8994_s4: 1800 mV normal idle
- <6>[ 0.445373] c3 6 pm8994_s5: 2150 mV normal idle
- <6>[ 0.445926] c3 6 pm8994_s7: 800 mV normal idle
- <6>[ 0.446489] c3 6 pm8994_l1: 1000 mV normal idle
- <6>[ 0.447097] c3 6 pm8994_l2: 1250 mV normal idle
- <6>[ 0.447924] c3 6 pm8994_l3: 1200 <--> 1250 mV at 1200 mV normal idle
- <6>[ 0.448496] c3 6 pm8994_l4: 1225 mV normal idle
- <6>[ 0.449064] c3 6 pm8994_l6: 1200 mV normal idle
- <6>[ 0.449621] c3 6 pm8994_l8: 1800 mV normal idle
- <6>[ 0.450222] c3 6 pm8994_l9: 1800 mV normal idle
- <6>[ 0.450795] c3 6 pm8994_l10: 2800 mV normal idle
- <6>[ 0.451353] c3 6 pm8994_l11: 1150 mV normal idle
- <6>[ 0.451925] c3 6 pm8994_l12: 1800 mV normal idle
- <6>[ 0.452869] c3 6 pm8994_l13: 1800 <--> 2950 mV at 2950 mV normal idle
- <6>[ 0.453482] c3 6 pm8994_l14: 1800 mV normal idle
- <6>[ 0.454404] c3 6 pm8994_l15: 1800 mV normal idle
- <6>[ 0.454969] c3 6 pm8994_l16: 2700 mV normal idle
- <6>[ 0.455542] c3 6 pm8994_l17: 2850 mV normal idle
- <6>[ 0.456465] c3 6 pm8994_l18: 1800 <--> 1900 mV at 1800 mV normal idle
- <6>[ 0.457358] c3 6 pm8994_l19: 2850 mV normal idle
- <6>[ 0.458106] c3 6 pm8994_l20: 2950 mV normal idle
- <6>[ 0.458664] c3 6 pm8994_l21: 2950 mV normal idle
- <6>[ 0.459685] c3 6 pm8994_l22: 3300 mV normal idle
- <6>[ 0.460569] c3 6 pm8994_l23: 1800 mV normal idle
- <6>[ 0.461131] c3 6 pm8994_l24: 3075 mV normal idle
- <6>[ 0.461704] c3 6 pm8994_l25: 1200 mV normal idle
- <6>[ 0.462660] c3 6 pm8994_l26_corner: 0 <--> 0 mV at 0 mV normal idle
- <6>[ 0.463152] c3 6 pm8994_l26_floor_corner: 0 <--> 0 mV at 0 mV normal idle
- <6>[ 0.463757] c3 6 pm8994_l27: 1050 mV normal idle
- <6>[ 0.464325] c3 6 pm8994_l28: 925 mV normal idle
- <6>[ 0.465519] c3 6 pm8994_l29: 3300 mV normal idle
- <6>[ 0.466228] c3 6 pm8994_l30: 1800 mV normal idle
- <6>[ 0.466833] c3 6 pm8994_l32: 1800 mV normal idle
- <6>[ 0.467405] c3 6 pm8994_lvs1: no parameters
- <6>[ 0.467854] c3 6 pm8994_lvs1_ext_ldo_switch: no parameters
- <6>[ 0.469602] c3 6 pm8994_lvs2: no parameters
- <6>[ 0.470161] c3 6 pmi8994_s1: 1025 mV normal idle
- <6>[ 0.470717] c3 6 pmi8994_boost_5v: no parameters
- <3>[ 0.470853] c3 6 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
- <3>[ 0.470977] c3 6 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
- <6>[ 0.471363] c3 6 pmi8994_boost_pin_ctrl: no parameters
- <3>[ 0.471430] c3 6 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
- <3>[ 0.471543] c3 6 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
- <6>[ 0.471982] c3 6 pmi8994_boostbypass: 3150 <--> 3600 mV at 3150 mV normal idle
- <6>[ 0.472457] c3 6 pm8994_s11: 470 <--> 1230 mV at 905 mV normal idle
- <6>[ 0.472745] c3 6 pm8994_s11_avs_limit: 470 <--> 1230 mV
- <6>[ 0.472916] c3 6 spm_regulator_probe: name=pm8994_s11, range=LV, voltage=905000 uV, mode=AUTO, step rate=2400 uV/us
- <6>[ 0.473906] c3 6 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
- <6>[ 0.473936] c3 6 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
- <6>[ 0.473952] c3 6 msm_thermal:sensor_mgr_init_threshold threshold id already initialized
- <6>[ 0.473971] c3 6 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
- <6>[ 0.473991] c3 6 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
- <6>[ 0.474376] c3 6 msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
- <3>[ 0.474392] c3 6 msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
- <6>[ 0.474408] c3 6 msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
- <3>[ 0.474422] c3 6 msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
- <3>[ 0.475047] c3 6 msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
- <3>[ 0.475366] c3 6 cpu-clock-8996 6400000.qcom,cpu-clock-8996: resources init failed
- <6>[ 0.501757] c1 6 qcom,gcc-8996 300000.qcom,gcc: Registered GCC clocks.
- <6>[ 0.502996] c1 6 vfe0_clk_src: set OPP pair(75000000 Hz: 3 uV) on a10000.qcom,vfe0
- <6>[ 0.503024] c1 6 vfe0_clk_src: set OPP pair(320000000 Hz: 5 uV) on a10000.qcom,vfe0
- <6>[ 0.503041] c1 6 vfe0_clk_src: set OPP pair(600000000 Hz: 7 uV) on a10000.qcom,vfe0
- <6>[ 0.503580] c1 6 vfe1_clk_src: set OPP pair(75000000 Hz: 3 uV) on a14000.qcom,vfe1
- <6>[ 0.503605] c1 6 vfe1_clk_src: set OPP pair(320000000 Hz: 5 uV) on a14000.qcom,vfe1
- <6>[ 0.503621] c1 6 vfe1_clk_src: set OPP pair(600000000 Hz: 7 uV) on a14000.qcom,vfe1
- <6>[ 0.504133] c1 6 cpp_clk_src: set OPP pair(100000000 Hz: 3 uV) on a04000.qcom,cpp
- <6>[ 0.504163] c1 6 cpp_clk_src: set OPP pair(480000000 Hz: 5 uV) on a04000.qcom,cpp
- <6>[ 0.504177] c1 6 cpp_clk_src: set OPP pair(640000000 Hz: 7 uV) on a04000.qcom,cpp
- <6>[ 0.517732] c1 6 qcom,mmsscc-8996 8c0000.qcom,mmsscc: Registered MMSS clocks.
- <6>[ 0.519893] c1 6 pmi8994_boost_5v: no parameters
- <3>[ 0.520128] c1 6 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
- <3>[ 0.520263] c1 6 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
- <6>[ 0.520574] c1 6 pmi8994_boost_pin_ctrl: no parameters
- <3>[ 0.520704] c1 6 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
- <3>[ 0.520819] c1 6 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
- <6>[ 0.521824] c1 6 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
- <6>[ 0.521853] c1 6 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
- <6>[ 0.521868] c1 6 msm_thermal:sensor_mgr_init_threshold threshold id already initialized
- <6>[ 0.521887] c1 6 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
- <6>[ 0.521907] c1 6 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
- <6>[ 0.522254] c1 6 msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
- <3>[ 0.522271] c1 6 msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
- <6>[ 0.522289] c1 6 msm-thermal 70000.qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
- <3>[ 0.522304] c1 6 msm_thermal:msm_thermal_dev_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517
- <6>[ 0.523132] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: speed bin = 0
- <6>[ 0.523157] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR fusing revision = 6
- <6>[ 0.523173] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: using redundant fuses = N
- <6>[ 0.523188] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR limitation = none
- <6>[ 0.523203] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: CPR partial binning limitation = none
- <6>[ 0.523220] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc0_pwrcl_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
- <6>[ 0.523693] c1 6 cpr3_hmss_kvreg_init: apc0_pwrcl_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
- <6>[ 0.523983] c1 6 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused MinSVS: open-loop= 585000 uV
- <6>[ 0.524000] c1 6 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused SVS: open-loop= 665000 uV
- <6>[ 0.524013] c1 6 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused NOM: open-loop= 775000 uV
- <6>[ 0.524026] c1 6 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused TURBO: open-loop= 900000 uV
- <6>[ 0.524141] c1 6 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused MinSVS: quot[ 7]= 322
- <6>[ 0.524156] c1 6 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused SVS: quot[ 7]= 464, quot_offset[ 7]= 135
- <6>[ 0.524169] c1 6 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused NOM: quot[ 7]= 692, quot_offset[ 7]= 225
- <6>[ 0.524183] c1 6 cpr3_msm8996_hmss_calculate_target_quotients: apc0_pwrcl_corner: fused TURBO: quot[ 7]= 926, quot_offset[ 7]= 230
- <6>[ 0.524349] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: speed bin = 0
- <6>[ 0.524366] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR fusing revision = 6
- <6>[ 0.524381] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: using redundant fuses = N
- <6>[ 0.524396] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR limitation = none
- <6>[ 0.524410] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: CPR partial binning limitation = none
- <6>[ 0.524429] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc0_cbf_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
- <6>[ 0.524609] c1 6 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused MinSVS: open-loop= 585000 uV
- <6>[ 0.524622] c1 6 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused SVS: open-loop= 665000 uV
- <6>[ 0.524634] c1 6 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused NOM: open-loop= 775000 uV
- <6>[ 0.524646] c1 6 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc0_cbf_corner: fused TURBO: open-loop= 900000 uV
- <6>[ 0.524702] c1 6 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused MinSVS: quot[ 7]= 322
- <6>[ 0.524716] c1 6 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused SVS: quot[ 7]= 464, quot_offset[ 7]= 135
- <6>[ 0.524729] c1 6 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused NOM: quot[ 7]= 692, quot_offset[ 7]= 225
- <6>[ 0.524742] c1 6 cpr3_msm8996_hmss_calculate_target_quotients: apc0_cbf_corner: fused TURBO: quot[ 7]= 926, quot_offset[ 7]= 230
- <6>[ 0.524872] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: speed bin = 0
- <6>[ 0.524887] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR fusing revision = 6
- <6>[ 0.524901] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: using redundant fuses = N
- <6>[ 0.524915] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR limitation = none
- <6>[ 0.524929] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: CPR partial binning limitation = none
- <6>[ 0.524946] c1 6 cpr3_msm8996_hmss_read_fuse_data: apc1_corner: Retention voltage fuses: VDD_MX = 4, VDD_APCC = 4
- <6>[ 0.525361] c1 6 cpr3_hmss_kvreg_init: apc1_corner: LDO min headroom=150000 uV, LDO max headroom=470000 uV, LDO adj=0 uV, LDO mode=allowed, LDO retention=490000 uV
- <6>[ 0.525665] c1 6 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused MinSVS: open-loop= 595000 uV
- <6>[ 0.525680] c1 6 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused SVS: open-loop= 635000 uV
- <6>[ 0.525692] c1 6 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused NOM: open-loop= 705000 uV
- <6>[ 0.525704] c1 6 cpr3_msm8996_hmss_calculate_open_loop_voltages: apc1_corner: fused TURBO: open-loop= 990000 uV
- <6>[ 0.525838] c1 6 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused MinSVS: quot[ 7]= 339
- <6>[ 0.525853] c1 6 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused SVS: quot[ 7]= 399, quot_offset[ 7]= 55
- <6>[ 0.525866] c1 6 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused NOM: quot[ 7]= 543, quot_offset[ 7]= 140
- <6>[ 0.525880] c1 6 cpr3_msm8996_hmss_calculate_target_quotients: apc1_corner: fused TURBO: quot[ 7]=1080, quot_offset[ 7]= 535
- <6>[ 0.526492] c1 6 cpr3_regulator_init_ctrl: apcc: Default CPR mode = SW closed-loop
- <6>[ 0.526679] c1 6 apc0_pwrcl_corner: 0 <--> 0 mV at 0 mV
- <6>[ 0.527031] c1 6 apc0_cbf_corner: 0 <--> 0 mV at 0 mV
- <6>[ 0.530777] c1 6 cpr3_regulator_measure_aging: apcc: average quotient delta=-12 (count=10)
- <6>[ 0.530841] c1 6 cpr3_regulator_aging_adjust: apcc: aging measurement successful; aging reference adjustment voltage=625 uV
- <6>[ 0.531440] c1 6 apc1_corner: 0 <--> 0 mV at 0 mV
- <6>[ 0.533749] c1 6 cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 4
- <6>[ 0.533775] c1 6 cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR limitation = none
- <6>[ 0.534130] c1 6 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 630000 uV
- <6>[ 0.534144] c1 6 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 675000 uV
- <6>[ 0.534157] c1 6 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 785000 uV
- <6>[ 0.534169] c1 6 cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-loop= 875000 uV
- <6>[ 0.534489] c1 6 cpr3_regulator_init_ctrl: gfx: Default CPR mode = closed-loop
- <6>[ 0.534670] c1 6 gfx_corner: 0 <--> 0 mV at 0 mV
- <6>[ 0.536601] c3 6 cpu-clock-8996 6400000.qcom,cpu-clock-8996: using perf/pwr/cbf speed bin 0 and pvs_ver 0
- <6>[ 0.539523] c3 6 clock-cpu-8996: set OPP pair (307200000 Hz, 625000 uv) on cpu0
- <6>[ 0.539572] c3 6 clock-cpu-8996: set OPP pair (1593600000 Hz, 965000 uv) on cpu0
- <6>[ 0.539599] c3 6 clock-cpu-8996: set OPP pair (307200000 Hz, 625000 uv) on cpu1
- <6>[ 0.539644] c3 6 clock-cpu-8996: set OPP pair (1593600000 Hz, 965000 uv) on cpu1
- <6>[ 0.539670] c3 6 clock-cpu-8996: set OPP pair (307200000 Hz, 625000 uv) on cpu2
- <6>[ 0.539735] c3 6 clock-cpu-8996: set OPP pair (2150400000 Hz, 1065000 uv) on cpu2
- <6>[ 0.539760] c3 6 clock-cpu-8996: set OPP pair (307200000 Hz, 625000 uv) on cpu3
- <6>[ 0.539820] c3 6 clock-cpu-8996: set OPP pair (2150400000 Hz, 1065000 uv) on cpu3
- <6>[ 0.540010] c3 6 clock-cpu-8996: set OPP pair (307200000 Hz, 630000 uv) on soc:qcom,m4m
- <6>[ 0.540098] c3 6 clock-cpu-8996: set OPP pair (1593600000 Hz, 965000 uv) on soc:qcom,m4m
- <6>[ 0.540579] c3 6 qcom,gpucc-8996 8c0000.qcom,gpucc: using speed bin 0
- <6>[ 0.541076] c3 6 gfx3d_clk_src_v2: set OPP pair(133000000 Hz: 560000 uV) on b00000.qcom,kgsl-3d0
- <6>[ 0.541108] c3 6 gfx3d_clk_src_v2: set OPP pair(624000000 Hz: 885000 uV) on b00000.qcom,kgsl-3d0
- <6>[ 0.542930] c3 6 qcom,gpucc-8996 8c0000.qcom,gpucc: Registered GPU clocks.
- <6>[ 0.543203] c3 6 pmi8994_boost_5v: no parameters
- <3>[ 0.543294] c3 6 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
- <3>[ 0.543467] c3 6 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
- <6>[ 0.543738] c3 6 pmi8994_boost_pin_ctrl: no parameters
- <3>[ 0.543807] c3 6 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
- <3>[ 0.543915] c3 6 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
- <6>[ 0.544824] c3 6 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
- <6>[ 0.544851] c3 6 msm-thermal 70000.qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
- <6>[ 0.544867] c3 6 msm_thermal:sensor_mgr_init_threshold threshold id already initialized
- <6>[ 0.544887] c3 6 msm-thermal 70000.qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
- <6>[ 0.544907] c3 6 msm-thermal 70000.qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
- <3>[ 0.545251] c3 6 msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
- <3>[ 0.545270] c3 6 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
- <3>[ 0.545286] c3 6 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
- <3>[ 0.545313] c3 6 msm-thermal 70000.qcom,msm-thermal: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues
- <6>[ 0.545896] c3 6 msm_thermal:msm_thermal_init limit temp = 60, core limit temp = 70, hotplug limit temp= 105
- <3>[ 0.546676] c3 21 msm_thermal:update_cpu_freq Unable to update policy for cpu:0. err:-19
- <3>[ 0.546741] c3 21 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
- <3>[ 0.546759] c3 21 msm_thermal:update_cpu_freq Unable to update policy for cpu:2. err:-19
- <6>[ 0.546923] c2 6 pmi8994_boost_5v: no parameters
- <3>[ 0.547030] c2 6 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst: Failed to find supply parent
- <3>[ 0.547155] c2 6 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_5v, rc=-517
- <6>[ 0.547447] c2 6 pmi8994_boost_pin_ctrl: no parameters
- <3>[ 0.547516] c2 6 qcom,rpm-smd-regulator soc:qcom,rpm-smd:rpm-regulator-bstb:regulator-bst-pin-ctrl: Failed to find supply parent
- <3>[ 0.547625] c2 6 rpm_vreg_device_probe: regulator_register failed: pmi8994_boost_pin_ctrl, rc=-517
- <3>[ 0.608105] c1 1 qpnp_pin_check_constraints: invalid pull value 4 for pin mpp 1
- <3>[ 0.608133] c1 1 qcom,qpnp-pin qpnp-pin-13: _qpnp_pin_config: unable to set default config for pmic pin 1
- <4>[ 0.608252] c1 1 qcom,qpnp-pin: probe of qpnp-pin-13 failed with error -22
- <6>[ 0.612695] c1 1 KPI: Bootloader start count = 33446
- <6>[ 0.612719] c1 1 KPI: Bootloader end count = 269530
- <6>[ 0.612732] c1 1 KPI: Bootloader display count = 62587
- <6>[ 0.612745] c1 1 KPI: Bootloader load kernel count = 8006
- <6>[ 0.612761] c1 1 KPI: Kernel MPM timestamp = 301577
- <6>[ 0.612772] c1 1 KPI: Kernel MPM Clock frequency = 32768
- <6>[ 0.612802] c1 1 socinfo_print: v0.11, id=246, ver=3.1, raw_id=2375, raw_ver=4, hw_plat=1, hw_plat_ver=65536
- <6>[ 0.612802] c1 1 accessory_chip=0, hw_plat_subtype=0, pmic_model=65545, pmic_die_revision=131072 foundry_id=3 serial_number=953244639 num_pmics=2
- <6>[ 0.613207] c1 1 gdsc_mmagic_bimc: no parameters
- <6>[ 0.614856] c1 1 vgaarb: loaded
- <5>[ 0.616845] c1 1 SCSI subsystem initialized
- <6>[ 0.618566] c1 1 usbcore: registered new interface driver usbfs
- <6>[ 0.618641] c1 1 usbcore: registered new interface driver hub
- <6>[ 0.618811] c1 1 usbcore: registered new device driver usb
- <4>[ 0.619474] c1 1 soc:usb_nop_phy supply vcc not found, using dummy regulator
- <6>[ 0.621570] c1 1 i2c-msm-v2 75ba000.i2c: probing driver i2c-msm-v2 [v02-GPIO recovery]
- <6>[ 0.621608] c1 1 i2c-msm-v2 75ba000.i2c: DT entry ret: 0, name: i2c, val: 12
- <6>[ 0.621627] c1 1 i2c-msm-v2 75ba000.i2c: DT entry ret: 0, name: qcom,clk-freq-out, val: 400000
- <6>[ 0.621643] c1 1 i2c-msm-v2 75ba000.i2c: DT entry ret: 0, name: qcom,clk-freq-in, val: 19200000
- <6>[ 0.621660] c1 1 i2c-msm-v2 75ba000.i2c: DT entry ret: 0, name: qcom,disable-dma, val: 0
- <6>[ 0.621675] c1 1 i2c-msm-v2 75ba000.i2c: DT entry ret: 0, name: qcom,master-id, val: 84
- <6>[ 0.621692] c1 1 i2c-msm-v2 75ba000.i2c: DT entry ret: -22, name: qcom,noise-rjct-scl, val: -64
- <6>[ 0.621708] c1 1 i2c-msm-v2 75ba000.i2c: DT entry ret: -22, name: qcom,noise-rjct-sda, val: 26345472
- <6>[ 0.621724] c1 1 i2c-msm-v2 75ba000.i2c: DT entry ret: -22, name: qcom,high-time-clk-div, val: 23115136
- <6>[ 0.621740] c1 1 i2c-msm-v2 75ba000.i2c: DT entry ret: -22, name: qcom,fs-clk-div, val: 0
- <6>[ 0.621756] c1 1 i2c-msm-v2 75ba000.i2c: DT entry ret: -22, name: qcom,nack-as-normal, val: 0
- <6>[ 0.621774] c1 1 i2c-msm-v2 75ba000.i2c: DT entry ret: -2, name: qcom,sda-gpio, val: 0
- <6>[ 0.621790] c1 1 i2c-msm-v2 75ba000.i2c: DT entry ret: -2, name: qcom,scl-gpio, val: 0
- <6>[ 0.621805] c1 1 i2c-msm-v2 75ba000.i2c: DT entry ret: -22, name: qcom,recover_clk_cnt, val: 0
- <3>[ 0.621956] c1 1 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- <6>[ 0.621971] c1 1 i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
- <6>[ 0.622497] c1 1 i2c-msm-v2 75ba000.i2c: note pinctrl_lookup_state(i2c_recovery) err:-19
- <6>[ 0.624080] c1 1 i2c-msm-v2 757a000.i2c: probing driver i2c-msm-v2 [v02-GPIO recovery]
- <6>[ 0.624119] c1 1 i2c-msm-v2 757a000.i2c: DT entry ret: 0, name: i2c, val: 6
- <6>[ 0.624138] c1 1 i2c-msm-v2 757a000.i2c: DT entry ret: 0, name: qcom,clk-freq-out, val: 400000
- <6>[ 0.624154] c1 1 i2c-msm-v2 757a000.i2c: DT entry ret: 0, name: qcom,clk-freq-in, val: 19200000
- <6>[ 0.624170] c1 1 i2c-msm-v2 757a000.i2c: DT entry ret: 0, name: qcom,disable-dma, val: 0
- <6>[ 0.624185] c1 1 i2c-msm-v2 757a000.i2c: DT entry ret: 0, name: qcom,master-id, val: 86
- <6>[ 0.624200] c1 1 i2c-msm-v2 757a000.i2c: DT entry ret: -22, name: qcom,noise-rjct-scl, val: -64
- <6>[ 0.624216] c1 1 i2c-msm-v2 757a000.i2c: DT entry ret: -22, name: qcom,noise-rjct-sda, val: 26345472
- <6>[ 0.624231] c1 1 i2c-msm-v2 757a000.i2c: DT entry ret: -22, name: qcom,high-time-clk-div, val: 23115136
- <6>[ 0.624247] c1 1 i2c-msm-v2 757a000.i2c: DT entry ret: -22, name: qcom,fs-clk-div, val: 0
- <6>[ 0.624262] c1 1 i2c-msm-v2 757a000.i2c: DT entry ret: -22, name: qcom,nack-as-normal, val: 0
- <6>[ 0.624278] c1 1 i2c-msm-v2 757a000.i2c: DT entry ret: -2, name: qcom,sda-gpio, val: 0
- <6>[ 0.624293] c1 1 i2c-msm-v2 757a000.i2c: DT entry ret: -2, name: qcom,scl-gpio, val: 0
- <6>[ 0.624308] c1 1 i2c-msm-v2 757a000.i2c: DT entry ret: -22, name: qcom,recover_clk_cnt, val: 0
- <3>[ 0.624447] c1 1 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- <6>[ 0.624462] c1 1 i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- <6>[ 0.624953] c1 1 i2c-msm-v2 757a000.i2c: note pinctrl_lookup_state(i2c_recovery) err:-19
- <6>[ 0.627742] c1 1 i2c-msm-v2 75b5000.i2c: probing driver i2c-msm-v2 [v02-GPIO recovery]
- <6>[ 0.627778] c1 1 i2c-msm-v2 75b5000.i2c: DT entry ret: 0, name: i2c, val: 7
- <6>[ 0.627795] c1 1 i2c-msm-v2 75b5000.i2c: DT entry ret: 0, name: qcom,clk-freq-out, val: 400000
- <6>[ 0.627811] c1 1 i2c-msm-v2 75b5000.i2c: DT entry ret: 0, name: qcom,clk-freq-in, val: 19200000
- <6>[ 0.627827] c1 1 i2c-msm-v2 75b5000.i2c: DT entry ret: 0, name: qcom,disable-dma, val: 0
- <6>[ 0.627841] c1 1 i2c-msm-v2 75b5000.i2c: DT entry ret: 0, name: qcom,master-id, val: 84
- <6>[ 0.627856] c1 1 i2c-msm-v2 75b5000.i2c: DT entry ret: -22, name: qcom,noise-rjct-scl, val: -64
- <6>[ 0.627871] c1 1 i2c-msm-v2 75b5000.i2c: DT entry ret: -22, name: qcom,noise-rjct-sda, val: 26345472
- <6>[ 0.627886] c1 1 i2c-msm-v2 75b5000.i2c: DT entry ret: -22, name: qcom,high-time-clk-div, val: 23115136
- <6>[ 0.627900] c1 1 i2c-msm-v2 75b5000.i2c: DT entry ret: -22, name: qcom,fs-clk-div, val: 0
- <6>[ 0.627915] c1 1 i2c-msm-v2 75b5000.i2c: DT entry ret: -22, name: qcom,nack-as-normal, val: 0
- <6>[ 0.627931] c1 1 i2c-msm-v2 75b5000.i2c: DT entry ret: -2, name: qcom,sda-gpio, val: 0
- <6>[ 0.627945] c1 1 i2c-msm-v2 75b5000.i2c: DT entry ret: -2, name: qcom,scl-gpio, val: 0
- <6>[ 0.627959] c1 1 i2c-msm-v2 75b5000.i2c: DT entry ret: -22, name: qcom,recover_clk_cnt, val: 0
- <3>[ 0.628102] c1 1 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- <6>[ 0.628117] c1 1 i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
- <6>[ 0.628609] c1 1 i2c-msm-v2 75b5000.i2c: note pinctrl_lookup_state(i2c_recovery) err:-19
- <6>[ 0.629846] c1 1 i2c-msm-v2 75b6000.i2c: probing driver i2c-msm-v2 [v02-GPIO recovery]
- <6>[ 0.629884] c1 1 i2c-msm-v2 75b6000.i2c: DT entry ret: 0, name: i2c, val: 8
- <6>[ 0.629901] c1 1 i2c-msm-v2 75b6000.i2c: DT entry ret: 0, name: qcom,clk-freq-out, val: 400000
- <6>[ 0.629916] c1 1 i2c-msm-v2 75b6000.i2c: DT entry ret: 0, name: qcom,clk-freq-in, val: 19200000
- <6>[ 0.629931] c1 1 i2c-msm-v2 75b6000.i2c: DT entry ret: 0, name: qcom,disable-dma, val: 1
- <6>[ 0.629945] c1 1 i2c-msm-v2 75b6000.i2c: DT entry ret: 0, name: qcom,master-id, val: 84
- <6>[ 0.629961] c1 1 i2c-msm-v2 75b6000.i2c: DT entry ret: -22, name: qcom,noise-rjct-scl, val: -64
- <6>[ 0.629976] c1 1 i2c-msm-v2 75b6000.i2c: DT entry ret: -22, name: qcom,noise-rjct-sda, val: 26345472
- <6>[ 0.629991] c1 1 i2c-msm-v2 75b6000.i2c: DT entry ret: -22, name: qcom,high-time-clk-div, val: 23115136
- <6>[ 0.630006] c1 1 i2c-msm-v2 75b6000.i2c: DT entry ret: -22, name: qcom,fs-clk-div, val: 0
- <6>[ 0.630072] c1 1 i2c-msm-v2 75b6000.i2c: DT entry ret: 0, name: qcom,nack-as-normal, val: 40
- <6>[ 0.630089] c1 1 i2c-msm-v2 75b6000.i2c: DT entry ret: -2, name: qcom,sda-gpio, val: 0
- <6>[ 0.630104] c1 1 i2c-msm-v2 75b6000.i2c: DT entry ret: -2, name: qcom,scl-gpio, val: 0
- <6>[ 0.630120] c1 1 i2c-msm-v2 75b6000.i2c: DT entry ret: -22, name: qcom,recover_clk_cnt, val: 0
- <3>[ 0.630269] c1 1 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- <6>[ 0.630284] c1 1 i2c-msm-v2 75b6000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
- <6>[ 0.630755] c1 1 i2c-msm-v2 75b6000.i2c: note pinctrl_lookup_state(i2c_recovery) err:-19
- <6>[ 0.633336] c0 1 i2c-msm-v2 75b7000.i2c: probing driver i2c-msm-v2 [v02-GPIO recovery]
- <6>[ 0.633461] c0 1 i2c-msm-v2 75b7000.i2c: DT entry ret: 0, name: i2c, val: 9
- <6>[ 0.633482] c0 1 i2c-msm-v2 75b7000.i2c: DT entry ret: 0, name: qcom,clk-freq-out, val: 400000
- <6>[ 0.633498] c0 1 i2c-msm-v2 75b7000.i2c: DT entry ret: 0, name: qcom,clk-freq-in, val: 19200000
- <6>[ 0.633515] c0 1 i2c-msm-v2 75b7000.i2c: DT entry ret: 0, name: qcom,disable-dma, val: 0
- <6>[ 0.633531] c0 1 i2c-msm-v2 75b7000.i2c: DT entry ret: 0, name: qcom,master-id, val: 84
- <6>[ 0.633547] c0 1 i2c-msm-v2 75b7000.i2c: DT entry ret: -22, name: qcom,noise-rjct-scl, val: -64
- <6>[ 0.633562] c0 1 i2c-msm-v2 75b7000.i2c: DT entry ret: -22, name: qcom,noise-rjct-sda, val: 26345472
- <6>[ 0.633578] c0 1 i2c-msm-v2 75b7000.i2c: DT entry ret: -22, name: qcom,high-time-clk-div, val: 23115136
- <6>[ 0.633593] c0 1 i2c-msm-v2 75b7000.i2c: DT entry ret: -22, name: qcom,fs-clk-div, val: 0
- <6>[ 0.633608] c0 1 i2c-msm-v2 75b7000.i2c: DT entry ret: -22, name: qcom,nack-as-normal, val: 0
- <6>[ 0.633626] c0 1 i2c-msm-v2 75b7000.i2c: DT entry ret: -2, name: qcom,sda-gpio, val: 0
- <6>[ 0.633642] c0 1 i2c-msm-v2 75b7000.i2c: DT entry ret: -2, name: qcom,scl-gpio, val: 0
- <6>[ 0.633657] c0 1 i2c-msm-v2 75b7000.i2c: DT entry ret: -22, name: qcom,recover_clk_cnt, val: 0
- <3>[ 0.633821] c0 1 AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- <6>[ 0.633836] c0 1 i2c-msm-v2 75b7000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
- <6>[ 0.634349] c0 1 i2c-msm-v2 75b7000.i2c: note pinctrl_lookup_state(i2c_recovery) err:-19
- <6>[ 0.635946] c0 1 media: Linux media interface: v0.10
- <6>[ 0.636028] c0 1 Linux video capture interface: v2.00
- <6>[ 0.666885] c0 1 cpufreq: driver msm up and running
- <6>[ 0.668176] c0 1 platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
- <6>[ 0.669041] c0 1 platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region
- <6>[ 0.669883] c0 1 platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region
- <6>[ 0.671059] c0 1 ION heap system created
- <6>[ 0.671298] c0 1 ION heap adsp created at 0x00000000ff800000 with size 400000
- <6>[ 0.671327] c0 1 ION heap qsecom created at 0x00000000fe400000 with size 1400000
- <6>[ 0.671353] c0 1 ION heap secure_display created at 0x00000000f8800000 with size 5c00000
- <6>[ 0.671377] c0 1 ION heap secure_heap created
- <3>[ 0.672921] c0 1 msm_bus_fabric_init_driver
- <3>[ 0.684145] c0 1 msm-bus-type fab-a0noc: Error: Failed to get regulator bus-gdsc:-517
- <3>[ 0.684186] c0 1 msm-bus-type fab-a0noc: Error: Failed to get regulator bus-a-gdsc:-517
- <3>[ 0.692985] c0 1 msm-bus-type slv-vmem-cfg: Error: Failed to get regulator node-gdsc:-517
- <3>[ 0.694161] c0 1 msm-bus-type slv-vmem: Error: Failed to get regulator node-gdsc:-517
- <3>[ 0.705022] c2 1 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
- <3>[ 0.705063] c2 1 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
- <3>[ 0.705096] c2 1 msm-bus-type fab-a0noc: Error: Failed to get regulator aggre0-snoc-axi-no-rate:-517
- <3>[ 0.705461] c2 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
- <3>[ 0.705522] c2 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
- <3>[ 0.705579] c2 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
- <3>[ 0.705636] c2 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
- <3>[ 0.705691] c2 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
- <3>[ 0.705748] c2 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
- <3>[ 0.705804] c2 1 msm-bus-type fab-mnoc: Error: Failed to get regulator mmagic-mdss-axi-no-rate:-517
- <6>[ 0.710601] c2 1 qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
- <6>[ 0.710641] c2 1 qcom,qpnp-power-on qpnp-power-on-2: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
- <6>[ 0.710934] c2 1 input: qpnp_pon as /devices/virtual/input/input0
- <6>[ 0.712049] c2 1 pon_spare_reg: no parameters
- <6>[ 0.712203] c2 1 qcom,qpnp-power-on qpnp-power-on-11: No PON config. specified
- <6>[ 0.712300] c2 1 qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'cold' boot
- <6>[ 0.712331] c2 1 qcom,qpnp-power-on qpnp-power-on-11: PMIC@SID2: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
- <6>[ 0.712677] c2 1 PMIC@SID0: PM8994 v2.0 options: 0, 0, 2, 2
- <6>[ 0.712847] c2 1 PMIC@SID2: PMI8996 v1.1 options: 0, 0, 0, 0
- <3>[ 0.715767] c2 1 ipa ipa2_uc_state_check:296 uC interface not initialized
- <3>[ 0.715803] c2 1 ipa ipa_sps_irq_control_all:942 EP (2) not allocated.
- <3>[ 0.715819] c2 1 ipa ipa_sps_irq_control_all:942 EP (5) not allocated.
- <6>[ 0.718361] c0 1 sps:BAM 0x0000000000684000 is registered.
- <3>[ 0.719365] c0 1 ipa ipa2_uc_state_check:296 uC interface not initialized
- <6>[ 0.719694] c0 1 sps:BAM 0x0000000000684000 (va:0xffffff8000840000) enabled: ver:0x27, number of pipes:20
- <3>[ 0.722621] c0 1 ipa ipa2_uc_state_check:296 uC interface not initialized
- <3>[ 0.732873] c3 1 ipa ipa2_uc_state_check:296 uC interface not initialized
- <6>[ 0.736149] c3 1 IPA driver initialization was successful.
- <6>[ 0.737902] c3 1 gdsc_mmagic_video: no parameters
- <6>[ 0.738378] c3 1 gdsc_mmagic_mdss: no parameters
- <6>[ 0.738805] c3 1 gdsc_mmagic_camss: no parameters
- <6>[ 0.739334] c3 1 gdsc_venus: no parameters
- <6>[ 0.739389] c3 1 gdsc_venus: supplied by gdsc_mmagic_video
- <6>[ 0.739839] c3 1 gdsc_venus_core0: fast normal
- <6>[ 0.740342] c3 1 gdsc_venus_core1: fast normal
- <6>[ 0.740788] c3 1 gdsc_camss_top: no parameters
- <6>[ 0.740837] c3 1 gdsc_camss_top: supplied by gdsc_mmagic_camss
- <6>[ 0.741274] c3 1 gdsc_vfe0: no parameters
- <6>[ 0.741322] c3 1 gdsc_vfe0: supplied by gdsc_camss_top
- <6>[ 0.741762] c3 1 gdsc_vfe1: no parameters
- <6>[ 0.741810] c3 1 gdsc_vfe1: supplied by gdsc_camss_top
- <6>[ 0.742246] c3 1 gdsc_mdss: no parameters
- <6>[ 0.742295] c3 1 gdsc_mdss: supplied by gdsc_mmagic_mdss
- <6>[ 0.743006] c3 1 gdsc_jpeg: no parameters
- <6>[ 0.743056] c3 1 gdsc_jpeg: supplied by gdsc_camss_top
- <6>[ 0.743590] c3 1 gdsc_cpp: no parameters
- <6>[ 0.743643] c3 1 gdsc_cpp: supplied by gdsc_camss_top
- <6>[ 0.744045] c3 1 gdsc_pcie_0: no parameters
- <6>[ 0.744412] c3 1 gdsc_pcie_1: no parameters
- <6>[ 0.744766] c3 1 gdsc_pcie_2: no parameters
- <6>[ 0.745132] c3 1 gdsc_usb30: no parameters
- <6>[ 0.745478] c3 1 gdsc_ufs: no parameters
- <6>[ 0.745980] c3 1 gdsc_fd: no parameters
- <6>[ 0.746030] c3 1 gdsc_fd: supplied by gdsc_camss_top
- <6>[ 0.746439] c3 1 gdsc_gpu: no parameters
- <6>[ 0.747607] c3 1 gdsc_gpu_gx: no parameters
- <6>[ 0.748056] c3 1 gdsc_gpu_gx: supplied by gfx_corner
- <6>[ 0.748520] c3 1 gdsc_hlos1_vote_aggre0_noc: no parameters
- <6>[ 0.748880] c3 1 gdsc_hlos1_vote_lpass_adsp: no parameters
- <6>[ 0.749259] c3 1 gdsc_hlos1_vote_lpass_core: no parameters
- <6>[ 0.749649] c3 1 gdsc_aggre0_noc: no parameters
- <6>[ 0.752865] c3 1 mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
- <6>[ 0.752897] c3 1 mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
- <4>[ 0.752952] c3 1 mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
- <6>[ 0.756207] c3 1 dsi_pll_clock_register_8996: Registered DSI PLL ndx=0 clocks successfully
- <6>[ 0.756306] c3 1 mdss_pll_probe: MDSS pll label = MDSS DSI 1 PLL
- <6>[ 0.756327] c3 1 mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 1 PLL PLL SSC enabled
- <4>[ 0.756370] c3 1 mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
- <3>[ 0.757582] c3 1 pll_is_pll_locked_8996: DSI PLL ndx=1 status=0 failed to Lock
- <6>[ 0.759030] c3 1 dsi_pll_clock_register_8996: Registered DSI PLL ndx=1 clocks successfully
- <6>[ 0.759111] c3 1 mdss_pll_probe: MDSS pll label = MDSS HDMI PLL
- <3>[ 0.759130] c3 1 mdss_pll_probe: Unable to get the cell-index rc=-22
- <4>[ 0.759170] c3 1 mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
- <4>[ 0.759196] c3 1 mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
- <4>[ 0.759222] c3 1 mdss_pll_util_parse_dt_supply: : error reading ulp load. rc=-22
- <7>[ 0.808667] c3 1 esoc bus registration done
- <6>[ 0.808773] c3 1 Advanced Linux Sound Architecture Driver Initialized.
- <6>[ 0.809533] c3 1 Bluetooth: ffffffc0f9647cf8
- <6>[ 0.809565] c3 1 NET: Registered protocol family 31
- <6>[ 0.809577] c3 1 Bluetooth: ffffffc0f9647cf8
- <6>[ 0.809592] c3 1 Bluetooth: ffffffc0f9647cc8Bluetooth: ffffffc0f9647c98
- <6>[ 0.809644] c3 1 Bluetooth: ffffffc0f9647cb8<6>[ 0.810188] c3 55 cfg80211: Calling CRDA to update world regulatory domain
- <1>[ 0.810538] c3 1 pcie:pcie_init.
- <4>[ 0.814400] c3 1 600000.qcom,pcie supply vreg-3.3 not found, using dummy regulator
- <3>[ 0.817767] c3 1 msm_pcie_get_resources: PCIe: RC0 can't get tcsr resource.
- <6>[ 0.821649] c0 6 pmi8994_boost_5v: no parameters
- <6>[ 0.822189] c0 6 pmi8994_boost_5v: supplied by pon_spare_reg
- <6>[ 0.823850] c0 6 pmi8994_boost_pin_ctrl: no parameters
- <6>[ 0.824294] c0 6 pmi8994_boost_pin_ctrl: supplied by pon_spare_reg
- <6>[ 0.825899] c0 6 ibb_reg: 4600 <--> 6000 mV at 5000 mV
- <6>[ 0.827307] c0 6 lab_reg: 4600 <--> 6000 mV at 5000 mV
- <6>[ 0.828732] c3 1 Switched to clocksource arch_sys_counter
- <6>[ 0.886558] c3 1 NET: Registered protocol family 2
- <6>[ 0.887506] c3 1 TCP established hash table entries: 32768 (order: 6, 262144 bytes)
- <6>[ 0.887622] c3 1 TCP bind hash table entries: 32768 (order: 8, 1048576 bytes)
- <6>[ 0.888467] c3 1 TCP: Hash tables configured (established 32768 bind 32768)
- <6>[ 0.888686] c3 1 TCP: reno registered
- <6>[ 0.888757] c3 1 UDP hash table entries: 2048 (order: 5, 196608 bytes)
- <6>[ 0.889022] c3 1 UDP-Lite hash table entries: 2048 (order: 5, 196608 bytes)
- <6>[ 0.889708] c3 1 NET: Registered protocol family 1
- <7>[ 0.889796] c3 1 PCI: CLS 0 bytes, default 64
- <6>[ 0.890667] c3 1 Trying to unpack rootfs image as initramfs...
- <6>[ 0.947207] c3 55 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:66
- <6>[ 0.947254] c3 55 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
- <6>[ 0.947263] c3 55 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:66
- <6>[ 0.947272] c3 55 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
- <6>[ 0.947281] c3 55 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:66
- <6>[ 0.947289] c3 55 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
- <6>[ 0.947297] c3 55 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:66
- <6>[ 0.947304] c3 55 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
- <6>[ 1.047240] c3 55 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 960000. Temp:60
- <6>[ 1.047286] c3 55 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
- <6>[ 1.047295] c3 55 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 960000. Temp:60
- <6>[ 1.047304] c3 55 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
- <6>[ 1.047313] c3 55 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1555200. Temp:60
- <6>[ 1.047322] c3 55 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
- <6>[ 1.047330] c3 55 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1555200. Temp:60
- <6>[ 1.047339] c3 55 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
- <6>[ 1.117661] c3 1 Freeing initrd memory: 8340K
- <6>[ 1.120492] c3 1 kryo perfevents: CPU pmu for kryo-pmuv3 detected
- <6>[ 1.128950] c3 1 futex hash table entries: 1024 (order: 4, 65536 bytes)
- <5>[ 1.129062] c3 1 Initialise system trusted keyring
- <6>[ 1.129166] c3 1 audit: initializing netlink subsys (disabled)
- <5>[ 1.129300] c3 1 audit: type=2000 audit(1.126:1): initialized
- <6>[ 1.140209] c3 1 early rtb deinitialized
- <6>[ 1.140226] c3 1 msm_rtb.size: 0x100000
- <6>[ 1.140335] c3 1 msm_rtb set ok: phys: 0x83700000, size: 0x100000
- <4>[ 1.149187] c3 1 vmscan: error setting kswapd cpu affinity mask
- <5>[ 1.155856] c3 1 VFS: Disk quotas dquot_6.5.2
- <4>[ 1.156026] c3 1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- <6>[ 1.157800] c3 1 exFAT: Core Version 1.2.19
- <6>[ 1.157821] c3 1 exFAT: FS Version 1.2.19
- <6>[ 1.157929] c3 1 Registering sdcardfs 0.1
- <6>[ 1.158251] c3 1 ntfs: driver 2.1.31 [Flags: R/W].
- <6>[ 1.158473] c3 1 fuse init (API version 7.23)
- <7>[ 1.159126] c3 1 SELinux: Registering netfilter hooks
- <5>[ 1.162963] c3 1 Key type asymmetric registered
- <5>[ 1.162990] c3 1 Asymmetric key parser 'x509' registered
- <6>[ 1.163216] c3 1 Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
- <6>[ 1.163240] c3 1 io scheduler noop registered
- <6>[ 1.163254] c3 1 io scheduler deadline registered
- <6>[ 1.163421] c3 1 io scheduler cfq registered (default)
- <3>[ 1.180626] c3 1 mdss_mdp_irq_clk_register: unable to get clk: lut_clk
- <3>[ 1.182580] c3 1 No change in context(0==0), skip
- <6>[ 1.183874] c3 1 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
- <6>[ 1.183885] c3 1 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:4 num:1 rect:0 ndx:0x2 prio:1
- <6>[ 1.183894] c3 1 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:8 num:2 rect:0 ndx:0x4 prio:2
- <6>[ 1.183904] c3 1 mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:12 num:8 rect:0 ndx:0x100 prio:3
- <6>[ 1.183932] c3 1 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:1 num:3 rect:0 ndx:0x8 prio:4
- <6>[ 1.183941] c3 1 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:5 num:4 rect:0 ndx:0x10 prio:5
- <6>[ 1.183950] c3 1 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:9 num:5 rect:0 ndx:0x20 prio:6
- <6>[ 1.183959] c3 1 mdss_mdp_pipe_addr_setup: type:1 ftchid:-1 xinid:13 num:9 rect:0 ndx:0x200 prio:7
- <6>[ 1.183981] c3 1 mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:2 num:6 rect:0 ndx:0x40 prio:8
- <6>[ 1.183990] c3 1 mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:10 num:7 rect:0 ndx:0x80 prio:9
- <6>[ 1.184013] c3 1 mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:10 rect:0 ndx:0x400 prio:0
- <6>[ 1.184022] c3 1 mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:7 num:11 rect:0 ndx:0x800 prio:1
- <3>[ 1.184038] c3 1 mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
- <3>[ 1.184142] c3 1 mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
- <6>[ 1.184682] c3 1 xlog_status: enable:1, panic:1, dump:3
- <3>[ 1.185035] c3 1 OF: no ranges; cannot translate
- <3>[ 1.185057] c3 1 OF: no ranges; cannot translate
- <3>[ 1.185864] c3 1 OF: no ranges; cannot translate
- <3>[ 1.185881] c3 1 OF: no ranges; cannot translate
- <3>[ 1.186104] c3 1 OF: no ranges; cannot translate
- <3>[ 1.186118] c3 1 OF: no ranges; cannot translate
- <3>[ 1.186326] c3 1 OF: no ranges; cannot translate
- <3>[ 1.186340] c3 1 OF: no ranges; cannot translate
- <6>[ 1.186678] c3 1 mdss_mdp_probe: mdss version = 0x10070002, bootloader display is on, num 1, intf_sel=0x00010100
- <6>[ 1.193927] c3 1 mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
- <6>[ 1.194195] c3 1 mdss_smmu_probe: iommu v2 domain[1] mapping and clk register successful!
- <6>[ 1.194397] c3 1 mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
- <6>[ 1.194590] c3 1 mdss_smmu_probe: iommu v2 domain[3] mapping and clk register successful!
- <4>[ 1.196550] c3 1 mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
- <6>[ 1.196575] c3 1 mdss_dsi_get_dt_vreg_data: gdsc min=0, max=0, enable=0, disable=0, ulp_load=0 preonsleep=0, postonsleep=0, preoffsleep=0, postoffsleep=0
- <4>[ 1.196602] c3 1 mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
- <6>[ 1.196615] c3 1 mdss_dsi_get_dt_vreg_data: vdda min=1250000, max=1250000, enable=18160, disable=1, ulp_load=1 preonsleep=0, postonsleep=0, preoffsleep=0, postoffsleep=0
- <4>[ 1.196631] c3 1 mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
- <6>[ 1.196643] c3 1 mdss_dsi_get_dt_vreg_data: vcca min=925000, max=925000, enable=17000, disable=32, ulp_load=32 preonsleep=0, postonsleep=0, preoffsleep=0, postoffsleep=0
- <3>[ 1.196654] c3 1 no supply entry present: htc,panel-supply-entries-stage2
- <6>[ 1.198482] c3 1 mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
- <6>[ 1.198938] c3 1 mdss_dsi_find_panel_of_node: cmdline:0:htc,pme_tianma_hx8396c2_cmd:1:htc,pme_tianma_hx8396c2_cmd:cfg:split_dsi panel_name:htc,pme_tianma_hx8396c2_cmd
- <6>[ 1.198962] c3 1 mdss_dsi_panel_init: Panel Name = Perfume WQHD TIANMA HX8396C2 5.2 Dual dsi cmd mode panel
- <6>[ 1.199087] c3 1 mdss_dsi_panel_timing_from_dt: found new timing "htc,pme_tianma_hx8396c2_cmd" (ffffffc0f9647178)
- <3>[ 1.199110] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=htc,mdss-dsi-post-on-command
- <3>[ 1.199122] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
- <3>[ 1.199133] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
- <4>[ 1.199142] c3 1 mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:
- <6>[ 1.199162] c3 1 mdss_dsi_parse_topology_config: cfg_node name config2 lm_split:0x0 pp_split:yes
- <3>[ 1.199260] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-on-command
- <3>[ 1.199272] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-off-command
- <6>[ 1.199293] c3 1 mdss_dsi_parse_panel_features: partial_update_enabled=0
- <6>[ 1.199305] c3 1 mdss_dsi_parse_panel_features: ulps feature disabled
- <6>[ 1.199316] c3 1 mdss_dsi_parse_panel_features: ulps during suspend feature disabled
- <6>[ 1.199326] c3 1 mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
- <4>[ 1.199347] c3 1 mdss_dsi_parse_esd_params: ESD_TE_V2 (te_signal_check_v2) method was deprecated, fallback to ESD_TE
- <3>[ 1.199364] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-on
- <3>[ 1.199375] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-off
- <6>[ 1.199401] c3 1 htc_mdss_dsi_parse_brt_bl_table: read htc,brt-bl-table success, brt_bl_table_size=3
- <3>[ 1.199498] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=htc,color-temp26-cmds
- <3>[ 1.199533] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=htc,mdss-dsi-on-fixup-command
- <6>[ 1.199544] c3 1 mdss_panel_parse_dt: Power Control Type=1
- <6>[ 1.199557] c3 1 mdss_dsi_parse_calibration_gain: Not support panel calibration
- <6>[ 1.199579] c3 1 mdss_panel_parse_bl_settings: 0000000000000000, 0000000000000000
- <4>[ 1.199606] c3 1 mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
- <6>[ 1.199621] c3 1 mdss_dsi_get_dt_vreg_data: vddio min=1800000, max=1800000, enable=62000, disable=80, ulp_load=80 preonsleep=0, postonsleep=1, preoffsleep=20, postoffsleep=200
- <4>[ 1.199635] c3 1 mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
- <6>[ 1.199648] c3 1 mdss_dsi_get_dt_vreg_data: lab min=4600000, max=6000000, enable=100000, disable=100, ulp_load=100 preonsleep=0, postonsleep=5, preoffsleep=0, postoffsleep=0
- <4>[ 1.199662] c3 1 mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
- <6>[ 1.199674] c3 1 mdss_dsi_get_dt_vreg_data: ibb min=4600000, max=6000000, enable=100000, disable=100, ulp_load=100 preonsleep=0, postonsleep=1, preoffsleep=5, postoffsleep=1
- <3>[ 1.199903] c3 1 no supply entry present: htc,panel-supply-entries-stage2
- <3>[ 1.200003] c3 1 mdss_dsi_parse_ctrl_params:4413 Unable to read qcom,display-id, data=0000000000000000,len=20
- <6>[ 1.200169] c3 1 mdss_dsi_parse_gpio_params: bklt_en gpio not specified
- <3>[ 1.200209] c3 1 mdss_dsi_parse_gpio_params:4467, extra reset gpio not specified
- <3>[ 1.200324] c3 1 msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
- <3>[ 1.200349] c3 1 mdss_dsi_retrieve_ctrl_resources+0x16c/0x254->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
- <6>[ 1.200360] c3 1 mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff8001902000 ctrl_size=400 phy_base=ffffff8001904400 phy_size=588
- <6>[ 1.200582] c3 1 dsi_panel_device_register: Continuous splash enabled
- <6>[ 1.201335] c3 1 mdss_register_panel: adding framebuffer device 994000.qcom,mdss_dsi_ctrl0
- <6>[ 1.201897] c3 1 platform 900000.qcom,mdss_mdp:qcom,mdss_fb_primary: assigned reserved memory node cont_splash_mem@83401000
- <6>[ 1.202396] c3 1 mdss_dsi_panel_power_on_hx8396c2: ctrl0 ext-vdd_en=0
- <6>[ 1.203736] c3 1 mdss_dsi_panel_power_ctrl_ext: cur_power_state=1 req_power_state=1
- <6>[ 1.204463] c3 1 mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x10040001, PHY rev:0x2
- <6>[ 1.205396] c3 1 mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
- <6>[ 1.205850] c3 1 mdss_dsi_find_panel_of_node: cmdline:0:htc,pme_tianma_hx8396c2_cmd:1:htc,pme_tianma_hx8396c2_cmd:cfg:split_dsi panel_name:htc,pme_tianma_hx8396c2_cmd
- <6>[ 1.205872] c3 1 mdss_dsi_panel_init: Panel Name = Perfume WQHD TIANMA HX8396C2 5.2 Dual dsi cmd mode panel
- <6>[ 1.205991] c3 1 mdss_dsi_panel_timing_from_dt: found new timing "htc,pme_tianma_hx8396c2_cmd" (ffffffc0f9647178)
- <3>[ 1.206014] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=htc,mdss-dsi-post-on-command
- <3>[ 1.206026] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
- <3>[ 1.206037] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
- <6>[ 1.206059] c3 1 mdss_dsi_parse_topology_config: cfg_node name config2 lm_split:0x0 pp_split:yes
- <3>[ 1.206154] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-on-command
- <3>[ 1.206166] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-idle-off-command
- <6>[ 1.206186] c3 1 mdss_dsi_parse_panel_features: partial_update_enabled=0
- <6>[ 1.206199] c3 1 mdss_dsi_parse_panel_features: ulps feature disabled
- <6>[ 1.206210] c3 1 mdss_dsi_parse_panel_features: ulps during suspend feature disabled
- <6>[ 1.206221] c3 1 mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
- <4>[ 1.206240] c3 1 mdss_dsi_parse_esd_params: ESD_TE_V2 (te_signal_check_v2) method was deprecated, fallback to ESD_TE
- <3>[ 1.206257] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-on
- <3>[ 1.206268] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-off
- <6>[ 1.206289] c3 1 htc_mdss_dsi_parse_brt_bl_table: read htc,brt-bl-table success, brt_bl_table_size=3
- <3>[ 1.206390] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=htc,color-temp26-cmds
- <3>[ 1.206423] c3 1 mdss_dsi_parse_dcs_cmds: failed, key=htc,mdss-dsi-on-fixup-command
- <6>[ 1.206434] c3 1 mdss_panel_parse_dt: Power Control Type=1
- <6>[ 1.206446] c3 1 mdss_dsi_parse_calibration_gain: Not support panel calibration
- <4>[ 1.206476] c3 1 mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
- <6>[ 1.206491] c3 1 mdss_dsi_get_dt_vreg_data: vddio min=1800000, max=1800000, enable=62000, disable=80, ulp_load=80 preonsleep=0, postonsleep=1, preoffsleep=20, postoffsleep=200
- <4>[ 1.206504] c3 1 mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
- <6>[ 1.206517] c3 1 mdss_dsi_get_dt_vreg_data: lab min=4600000, max=6000000, enable=100000, disable=100, ulp_load=100 preonsleep=0, postonsleep=5, preoffsleep=0, postoffsleep=0
- <4>[ 1.206531] c3 1 mdss_dsi_get_dt_vreg_data: error reading ulp load. rc=-22
- <6>[ 1.206544] c3 1 mdss_dsi_get_dt_vreg_data: ibb min=4600000, max=6000000, enable=100000, disable=100, ulp_load=100 preonsleep=0, postonsleep=1, preoffsleep=5, postoffsleep=1
- <3>[ 1.206900] c3 1 no supply entry present: htc,panel-supply-entries-stage2
- <3>[ 1.207009] c3 1 mdss_dsi_parse_ctrl_params:4413 Unable to read qcom,display-id, data=0000000000000000,len=20
- <6>[ 1.207090] c3 1 mdss_dsi_parse_gpio_params: bklt_en gpio not specified
- <3>[ 1.207126] c3 1 mdss_dsi_parse_gpio_params:4467, extra reset gpio not specified
- <3>[ 1.207163] c3 1 request vddio gpio failed, rc=-16
- <3>[ 1.207199] c3 1 msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
- <3>[ 1.207225] c3 1 mdss_dsi_retrieve_ctrl_resources+0x16c/0x254->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
- <6>[ 1.207235] c3 1 mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff8001908000 ctrl_size=400 phy_base=ffffff800190a400 phy_size=558
- <6>[ 1.207274] c3 1 dsi_panel_device_register: Continuous splash enabled
- <3>[ 1.208084] c3 1 panel_debug_register_base: debugfs_create_file: data_type fail
- <6>[ 1.208105] c3 1 mdss_dsi_panel_power_on_hx8396c2: ctrl1 ext-vdd_en=0
- <6>[ 1.208130] c3 1 mdss_dsi_panel_power_ctrl_ext: cur_power_state=1 req_power_state=1
- <6>[ 1.208454] c3 1 mdss_dsi_ctrl_probe: Dsi Ctrl->1 initialized, DSI rev:0x10040001, PHY rev:0x2
- <6>[ 1.210165] c3 1 mdss_dsi_status_init: DSI status check interval:5000
- <3>[ 1.211670] c3 1 hdmi_tx_get_dt_data:4463 Unable to read qcom,display-id, data=0000000000000000,len=0
- <6>[ 1.212544] c3 1 hdmi_tx_init_resource: 'core_physical': start = 0xffffff800190e000, len=0x50c
- <6>[ 1.212561] c3 1 hdmi_tx_init_resource: 'qfprom_physical': start = 0xffffff8001910000, len=0x6158
- <6>[ 1.212658] c3 1 hdmi_tx_init_resource: 'hdcp_physical': start = 0xffffff8001918000, len=0xfff
- <6>[ 1.212963] c3 1 hdmi_tx_enable_power: 0, en=1
- <6>[ 1.213116] c3 1 hdmi_tx_enable_power: 0, en=1 done
- <6>[ 1.213128] c3 1 hdmi_tx_enable_power: 0, en=0
- <6>[ 1.213225] c3 1 hdmi_tx_enable_power: 0, en=0 done
- <6>[ 1.213243] c3 1 hdmi_tx_check_capability: Features <HDMI:ON, HDCP:ON>
- <6>[ 1.214248] c3 1 mdss_register_panel: adding framebuffer device 9a0000.qcom,hdmi_tx
- <6>[ 1.217129] c3 1 mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
- <6>[ 1.219615] c3 1 mdss_fb_probe: fb0: split_mode:3 left:0 right:0
- <6>[ 1.221031] c3 1 mdss_fb_register: FrameBuffer[0] 1440x2560 registered successfully!
- <3>[ 1.221755] c3 1 htc_register_attrs
- <6>[ 1.222642] c3 1 mdss_mdp_splash_parse_dt: memaddr=c0000000 size=3000000, use_cma=1
- <6>[ 1.228922] c3 1 mdss_mdp_splash_parse_dt: cma: vaddr=ffffff8003891000, dma=0x00000000c0000000
- <6>[ 1.229075] c3 1 mdss_fb_probe: fb1: split_mode:0 left:0 right:0
- <6>[ 1.229280] c3 1 mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
- <6>[ 1.229850] c3 1 input: HDMI CEC User or Deck Control as /devices/virtual/input/input1
- <6>[ 1.231017] c3 1 mdss_mdp_splash_parse_dt: memaddr=b1c00000 size=23ff000, use_cma=0
- <6>[ 1.237144] c3 1 mdss_fb_probe: fb2: split_mode:0 left:0 right:0
- <6>[ 1.237356] c3 1 mdss_fb_register: FrameBuffer[2] 640x480 registered successfully!
- <3>[ 1.237470] c3 1 mdss_mdp_splash_parse_dt: splash mem child node is not present
- <6>[ 1.240313] c0 6 SlimPort Colorado3 anx7816_i2c_probe start
- <6>[ 1.240824] c0 6 SlimPort Colorado3 gpio p_dwn : 96, reset : 105, gpio_cbl_det 132
- <6>[ 1.244274] c0 6 anx7816_regulator_configure: vdd10 = 1050000 uV, vdd33 = 3300000 uV
- <6>[ 1.244297] c0 6 anx7816_regulator_configure exit rc=0
- <6>[ 1.244397] c2 6 SlimPort Colorado3 anx7816_init_gpio: anx7816 init gpio
- <6>[ 1.247153] c3 55 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:48
- <6>[ 1.247176] c3 55 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
- <6>[ 1.247186] c3 55 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:48
- <6>[ 1.247194] c3 55 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
- <6>[ 1.247203] c3 55 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:48
- <6>[ 1.247212] c3 55 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
- <6>[ 1.247220] c3 55 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:48
- <6>[ 1.247227] c3 55 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
- <6>[ 1.248630] c1 6 sp_tx_hardware_poweron enable vdd10 ffffffc0f75eca00
- <3>[ 1.249158] c0 47 smd_channel_probe_now: allocation table not initialized
- <6>[ 1.262257] c1 6 SlimPort Colorado3 sp_tx_hardware_poweron: anx7816 power on
- <6>[ 1.263504] c2 1 In memshare_probe, Memshare probe success
- <3>[ 1.263716] c0 6 i2c-msm-v2 75b7000.i2c: msm_bus_scale_register_client(mstr-id:84):0x8 (ok)
- <6>[ 1.264601] c0 6 SlimPort Colorado3 slimport_chip_detect : CHIPID: ANX7816
- <6>[ 1.270984] c0 6 SlimPort Colorado3 sp_tx_hardware_powerdown: anx7816 power down
- <6>[ 1.271485] c0 6 SlimPort Colorado3 anx7816_i2c_probe end
- <6>[ 1.271596] c2 1 l2cache-pmu soc:l2-pmu: Registered L2 cache PMU using 2 HW PMUs
- <5>[ 1.272903] c2 1 msm_rpm_log_probe: OK
- <6>[ 1.274323] c2 1 RPM Version: 20153.0.9
- <6>[ 1.279068] c3 1 subsys-pil-tz ce0000.qcom,venus: for venus segments only will be dumped.
- <6>[ 1.280303] c3 1 subsys-pil-tz soc:qcom,kgsl-hyp: for a530_zap segments only will be dumped.
- <4>[ 1.283962] c3 1 pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
- <4>[ 1.286073] c3 1 htc-smi probe++
- <6>[ 1.291167] c2 1 msm_serial_hs module loaded
- <3>[ 1.292436] c2 1 uart_tx_gpio is not available
- <3>[ 1.292451] c2 1 uart_rx_gpio is not available
- <3>[ 1.292459] c2 1 uart_cts_gpio is not available
- <3>[ 1.292467] c2 1 uart_rfr_gpio is not available
- <6>[ 1.292570] c2 1 Wakeup irq not specified.
- <3>[ 1.293722] c3 1 sps: BAM device 0x0000000007544000 is not registered yet.
- <6>[ 1.293935] c3 1 sps:BAM 0x0000000007544000 is registered.
- <6>[ 1.295761] c3 1 7570000.uart: ttyHS0 at MMIO 0x7570000 (irq = 19, base_baud = 460800) is a MSM HS UART
- <6>[ 1.298288] c3 1 [BT] msm_serial_hs module loaded
- <6>[ 1.299317] c3 1 msm_serial_hsl_probe: serial console disabled, do not proceed msm_serial_hsl_probe().
- <6>[ 1.300554] c3 1 msm_serial_hsl_init: driver initialized
- <4>[ 1.306895] c3 1 [USBDIAG] diagfwd initializing, kernel_flag=[0x0] .., radio_flag=[0x0]
- <6>[ 1.307621] c3 1 [USB] [USB] usb_diag_open: name: diag
- <6>[ 1.315235] c3 1 [USBDIAG] diagchar initialized now
- <6>[ 1.347205] c3 55 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:49
- <6>[ 1.347237] c3 55 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
- <6>[ 1.347245] c3 55 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:49
- <6>[ 1.347253] c3 55 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
- <6>[ 1.347261] c3 55 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:49
- <6>[ 1.347268] c3 55 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
- <6>[ 1.347275] c3 55 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:49
- <6>[ 1.347283] c3 55 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
- <6>[ 1.360082] c3 1 brd: module loaded
- <6>[ 1.361559] c3 1 loop: module loaded
- <6>[ 1.361791] c3 1 zram: Created 1 device(s) ...
- <4>[ 1.361838] c3 1 fpc1020_init
- <4>[ 1.364145] c3 1 Check fpc1020_probe
- <6>[ 1.364343] c3 1 fpc1020 soc:fp_fpc1155: found pin control fpc1020_irq_active
- <4>[ 1.364356] c3 1 i=0
- <6>[ 1.364363] c3 1 fpc1020 soc:fp_fpc1155: found pin control fpc1020_reset_reset
- <4>[ 1.364370] c3 1 i=1
- <6>[ 1.364377] c3 1 fpc1020 soc:fp_fpc1155: found pin control fpc1020_reset_active
- <4>[ 1.364383] c3 1 i=2
- <6>[ 1.364592] c3 1 input: fpc1020 as /devices/soc/soc:fp_fpc1155/input/input2
- <6>[ 1.364925] c3 1 fpc1020 soc:fp_fpc1155: Enabling hardware
- <6>[ 1.364933] c3 1 fpc1020 soc:fp_fpc1155: fpc1020_probe: ok
- <6>[ 1.366225] c3 1 QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
- <4>[ 1.366304] c3 1 QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
- <6>[ 1.366315] c3 1 QSEECOM: qseecom_probe: no-clock-support=0x1<4>[ 1.366324] c3 1 QSEECOM: qseecom_probe: qsee reentrancy support phase is not defined, setting to default 0
- <4>[ 1.367003] c3 1 QSEECOM: qseecom_probe: qseecom.whitelist_support = 0
- <4>[ 1.369113] c3 1 i2c-core: driver [tabla-i2c-core] using legacy suspend method
- <4>[ 1.369125] c3 1 i2c-core: driver [tabla-i2c-core] using legacy resume method
- <4>[ 1.369194] c3 1 i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
- <4>[ 1.369201] c3 1 i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
- <4>[ 1.369261] c3 1 i2c-core: driver [tasha-i2c-core] using legacy suspend method
- <4>[ 1.369268] c3 1 i2c-core: driver [tasha-i2c-core] using legacy resume method
- <6>[ 1.372029] c3 1 qce 660000.qcedev: Qualcomm Crypto 5.3.1 device found @0x660000
- <6>[ 1.372054] c3 1 qce 660000.qcedev: CE device = 0x0
- <6>[ 1.372054] c3 1 IO base, CE = 0xffffff80037c0000
- <6>[ 1.372054] c3 1 Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
- <6>[ 1.372054] c3 1 IO base BAM = 0x0000000000000000
- <6>[ 1.372054] c3 1 BAM IRQ 206
- <6>[ 1.372054] c3 1 Engines Availability = 0x2011053
- <6>[ 1.372311] c3 1 sps:BAM 0x0000000000644000 is registered.
- <6>[ 1.372603] c3 1 sps:BAM 0x0000000000644000 (va:0xffffff8006900000) enabled: ver:0x27, number of pipes:16
- <6>[ 1.372965] c3 1 QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 206
- <6>[ 1.382282] c3 1 qcrypto 660000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x660000
- <6>[ 1.382310] c3 1 qcrypto 660000.qcrypto: CE device = 0x0
- <6>[ 1.382310] c3 1 IO base, CE = 0xffffff8006940000
- <6>[ 1.382310] c3 1 Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
- <6>[ 1.382310] c3 1 IO base BAM = 0x0000000000000000
- <6>[ 1.382310] c3 1 BAM IRQ 206
- <6>[ 1.382310] c3 1 Engines Availability = 0x2011053
- <6>[ 1.382851] c3 1 QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000644000 irq 206
- <6>[ 1.388786] c3 1 qcrypto 660000.qcrypto: qcrypto-ecb-aes
- <6>[ 1.388978] c3 1 qcrypto 660000.qcrypto: qcrypto-cbc-aes
- <6>[ 1.389101] c3 1 qcrypto 660000.qcrypto: qcrypto-ctr-aes
- <6>[ 1.389221] c3 1 qcrypto 660000.qcrypto: qcrypto-ecb-des
- <6>[ 1.389342] c3 1 qcrypto 660000.qcrypto: qcrypto-cbc-des
- <6>[ 1.389463] c3 1 qcrypto 660000.qcrypto: qcrypto-ecb-3des
- <6>[ 1.389592] c3 1 qcrypto 660000.qcrypto: qcrypto-cbc-3des
- <6>[ 1.389714] c3 1 qcrypto 660000.qcrypto: qcrypto-xts-aes
- <6>[ 1.389837] c3 1 qcrypto 660000.qcrypto: qcrypto-sha1
- <6>[ 1.389962] c3 1 qcrypto 660000.qcrypto: qcrypto-sha256
- <6>[ 1.390185] c2 1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
- <6>[ 1.390351] c3 1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
- <6>[ 1.390466] c3 1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
- <6>[ 1.390590] c3 1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
- <6>[ 1.390708] c3 1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
- <6>[ 1.390822] c3 1 qcrypto 660000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
- <6>[ 1.390943] c3 1 qcrypto 660000.qcrypto: qcrypto-hmac-sha1
- <6>[ 1.391063] c3 1 qcrypto 660000.qcrypto: qcrypto-hmac-sha256
- <6>[ 1.391179] c3 1 qcrypto 660000.qcrypto: qcrypto-aes-ccm
- <6>[ 1.391293] c3 1 qcrypto 660000.qcrypto: qcrypto-rfc4309-aes-ccm
- <6>[ 1.394804] c3 1 ICE IRQ = 31
- <3>[ 1.394964] c3 1 qcom_ice_get_device_tree_data: No vdd-hba-supply regulator, assuming not needed
- <6>[ 1.395036] c3 1 ICE IRQ = 32
- <3>[ 1.401810] c3 1 ufshcd 624000.ufshc: ufshcd_variant_hba_init: variant qcom init failed err -19
- <3>[ 1.403022] c3 1 ufshcd 624000.ufshc: Intialization failed
- <6>[ 1.404862] c3 1 SCSI Media Changer driver v0.25
- <6>[ 1.411719] c2 1 sps:BAM 0x0000000007544000 (va:0xffffff8002340000) enabled: ver:0x19, number of pipes:24
- <6>[ 1.413175] c3 1 spi_master spi2: will run message pump with realtime priority
- <6>[ 1.417720] c3 1 Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
- <6>[ 1.419159] c3 1 tun: Universal TUN/TAP device driver, 1.6
- <6>[ 1.419169] c3 1 tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- <6>[ 1.419301] c3 1 PPP generic driver version 2.4.2
- <6>[ 1.419384] c3 1 PPP BSD Compression module registered
- <6>[ 1.419396] c3 1 PPP Deflate Compression module registered
- <6>[ 1.419442] c3 1 PPP MPPE Compression module registered
- <6>[ 1.419459] c3 1 NET: Registered protocol family 24
- <6>[ 1.419504] c3 1 [WLAN] htc_wifi_dev_init: start
- <3>[ 1.419510] c3 1 [WLAN] htc_wifi_init_mem: Enter
- <3>[ 1.419720] c3 1 [WLAN] htc_wifi_init_mem: WIFI MEM Allocated
- <3>[ 1.419729] c3 1 [WLAN] htc_wifi_get_irq_gpio: flags 414
- <4>[ 1.421780] c3 1 [WLAN] htc_wifi_gpio_probe enter
- <3>[ 1.421839] c3 1 [WLAN] htc_wifi_gpio_init: gpio 1010 -> direction_output
- <3>[ 1.421950] c3 1 [WLAN] htc_wifi_gpio_init: gpio 122 -> direction_input
- <3>[ 1.421994] c3 1 [WLAN] htc_wifi_gpio_init: gpio 26 -> direction_input
- <3>[ 1.422032] c3 1 [WLAN] htc_wifi_gpio_init: gpio 25 -> direction_input
- <3>[ 1.422056] c3 1 [WLAN] htc_wifi_rc_num = 0
- <6>[ 1.423210] c3 1 usbcore: registered new interface driver asix
- <6>[ 1.423312] c3 1 usbcore: registered new interface driver ax88179_178a
- <6>[ 1.423343] c3 1 usbcore: registered new interface driver cdc_ether
- <6>[ 1.423487] c3 1 usbcore: registered new interface driver net1080
- <6>[ 1.423520] c3 1 usbcore: registered new interface driver cdc_subset
- <6>[ 1.423553] c3 1 usbcore: registered new interface driver zaurus
- <6>[ 1.423850] c3 1 usbcore: registered new interface driver cdc_ncm
- <6>[ 1.423883] c3 1 usbcore: registered new interface driver qmi_wwan
- <6>[ 1.424569] c3 55 msm_sharedmem: sharedmem_register_qmi: qmi init successful
- <6>[ 1.428354] c3 1 msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
- <4>[ 1.433306] c3 1 7411000.qusb supply USB3_GDSC not found, using dummy regulator
- <4>[ 1.433741] c3 1 7412000.qusb supply USB3_GDSC not found, using dummy regulator
- <3>[ 1.433794] c3 1 msm-qusb-phy 7412000.qusb: usb-phy-always-on was not found
- <3>[ 1.439047] c3 1 msm-dwc3 6a00000.ssusb: unable to get dbm device
- <6>[ 1.443584] c3 1 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- <6>[ 1.443640] c3 1 ehci-pci: EHCI PCI platform driver
- <6>[ 1.443780] c3 1 usbcore: registered new interface driver cdc_wdm
- <6>[ 1.443828] c3 1 usbcore: registered new interface driver usb-storage
- <6>[ 1.443856] c3 1 usbcore: registered new interface driver ums-alauda
- <6>[ 1.443883] c3 1 usbcore: registered new interface driver ums-cypress
- <6>[ 1.443912] c3 1 usbcore: registered new interface driver ums-datafab
- <6>[ 1.443940] c3 1 usbcore: registered new interface driver ums-freecom
- <6>[ 1.443968] c3 1 usbcore: registered new interface driver ums-isd200
- <6>[ 1.443994] c3 1 usbcore: registered new interface driver ums-jumpshot
- <6>[ 1.444020] c3 1 usbcore: registered new interface driver ums-karma
- <6>[ 1.444047] c3 1 usbcore: registered new interface driver ums-sddr09
- <6>[ 1.444074] c3 1 usbcore: registered new interface driver ums-sddr55
- <6>[ 1.444103] c3 1 usbcore: registered new interface driver ums-usbat
- <6>[ 1.444208] c3 1 usbcore: registered new interface driver usbserial
- <6>[ 1.444239] c3 1 usbcore: registered new interface driver ftdi_sio
- <6>[ 1.444264] c3 1 usbserial: USB Serial support registered for FTDI USB Serial Device
- <6>[ 1.444294] c3 1 usbcore: registered new interface driver usb_ehset_test
- <6>[ 1.444977] c3 1 usbcore: registered new interface driver ks_bridge
- <6>[ 1.444986] c3 1 ksb_init: init done
- <6>[ 1.445739] c3 1 [USB] gbridge_init: gbridge_init successs.
- <6>[ 1.445911] c3 1 mousedev: PS/2 mouse device common for all mice
- <6>[ 1.446188] c3 1 usbcore: registered new interface driver xpad
- <6>[ 1.446200] c3 1 [cap] cypress_cap_init: enter
- <6>[ 1.446889] c1 6 [cap] cypress_cap_init_async: +++++
- <6>[ 1.447253] c1 6 [cap] cypress_fw_update_probe
- <6>[ 1.447283] c1 6 [cap][FWU]: register_cap_fw_update: enter
- <6>[ 1.447307] c1 6 [cap][FWU]: register_cap_fw_update: Major number of dev = 225
- <6>[ 1.447307] c1 6
- <6>[ 1.447472] c0 54 [OHIO] ohio_i2c_probe start
- <6>[ 1.447534] c1 6 [cap][FWU]: register_cap_fw_update: register success
- <6>[ 1.448905] c0 54 [USBC][FWU]: register_usbc_fw_update: enter
- <6>[ 1.448945] c0 54 [USBC][FWU]: register_usbc_fw_update: Major number of dev = 224
- <6>[ 1.448945] c0 54
- <6>[ 1.449226] c0 54 [USBC][FWU]: register_usbc_fw_update: register success
- <6>[ 1.451195] c0 54 [OHIO] ohio_i2c_probe: delay 2000ms to detect cbl_det
- <6>[ 1.452098] c0 54 [OHIO] ohio_i2c_probe successfully
- <4>[ 1.452209] c0 54 i2c-core: driver [ohio] using legacy suspend method
- <4>[ 1.452225] c0 54 i2c-core: driver [ohio] using legacy resume method
- <6>[ 1.454011] c3 1 [TP][FWU]: touch_fwu_probe: enter
- <6>[ 1.454066] c3 1 [TP][FWU]: touch_fwu_probe: done
- <6>[ 1.454085] c1 6 [cap] cypress_cap_probe: enter
- <6>[ 1.454118] c1 6 [cap] cypress_parse_dt: Start
- <6>[ 1.454684] c1 6 [cap] cypress_parse_dt: gpio_irq:92, gpio_rst:85, gpio_ind:107
- <6>[ 1.455013] c1 6 [cap] cypress_parse_dt: gpio_id:62(Active High); cap_regulator_volt:1900000uV.
- <6>[ 1.455044] c1 6 [cap] cypress_parse_dt: project ID = 0x10
- <6>[ 1.455073] c1 6 [cap] cypress_parse_dt: cap[0]:APPSELECT
- <6>[ 1.455091] c1 6 [cap] cypress_parse_dt: cap[1]:BACK
- <6>[ 1.455110] c1 6 [cap] cypress_cap_pinctrl_init
- <6>[ 1.455629] c3 1 [HL] (hall_sensor_init) In init HL
- <6>[ 1.455784] c3 1 [KEY] dummy_keypad_init: dummy_keypad: initial running...
- <6>[ 1.455915] c3 1 input: dummy_keypad as /devices/virtual/input/input3
- <6>[ 1.459861] c1 6 [cap] cypress_cap_pinctrl_select: set to 1
- <6>[ 1.460184] c1 6 [cap] cypress_cap_regulator_set: id pin status:0, active low:0, enable=0
- <6>[ 1.460202] c1 6 [cap] cypress_cap_regulator_set: cap regulator voltage is unchanged.
- <6>[ 1.460290] c1 6 [cap] cypress_cap_reset
- <6>[ 1.460363] c0 54 [HL] (hall_sensor_probe) ++++++++++++++++++
- <6>[ 1.460388] c0 54 [HL] (hall_sensor_dt_parser) DT:hall,att_used=2
- <6>[ 1.460677] c0 54 [HL] (hall_sensor_dt_parser) DT:hall,att_gpio[1013] read
- <6>[ 1.460727] c0 54 [HL] (hall_sensor_dt_parser) DT:hall,att_gpio_s[1004] read
- <6>[ 1.460757] c0 54 [HL] (hall_input_register) hall_input_register
- <6>[ 1.460757] c0 54
- <6>[ 1.461038] c0 54 input: AK8789_HALL_SENSOR as /devices/virtual/input/input4
- <6>[ 1.461840] c0 54 [HL] (hall_sensor_probe) Operate in [Interrupt] mode, irq[593]
- <6>[ 1.462164] c0 54 [HL] (hall_sensor_probe) Operate in [Interrupt] mode, irq[594]
- <6>[ 1.462213] c0 54 [HL] (hall_cover_sysfs_init) attribute file register Done
- <6>[ 1.462229] c0 54 [HL] (hall_sensor_probe) ------------------
- <6>[ 1.462322] c3 1 [KEY] keyled_probe: +++
- <6>[ 1.462336] c3 1 [KEY] DT:key_down_delay=3000
- <6>[ 1.462343] c3 1 [KEY] DT:keys_down num_keys=3
- <6>[ 1.462351] c3 1 [KEY] DT:keys_down=116
- <6>[ 1.462356] c3 1 [KEY] DT:keys_down=114
- <6>[ 1.462362] c3 1 [KEY] DT:keys_down=0
- <6>[ 1.462369] c3 1 [KEY] DT:keys_up property not found
- <6>[ 1.462385] c3 1 [KEY] keyled_probe: ---
- <6>[ 1.462677] c0 54 [HL] (hall_sensor_init_async) In reg HL
- <6>[ 1.462784] c3 1 [KEY] keycombo_probe: +++
- <6>[ 1.462837] c3 1 [KEY] keycombo_probe: ---
- <6>[ 1.463450] c3 1 qcom,qpnp-rtc qpnp-rtc-8: rtc core: registered qpnp_rtc as rtc0
- <6>[ 1.463688] c3 1 i2c /dev entries driver
- <6>[ 1.463974] c3 1 [AUD] tfa9888: tfa9888_init
- <4>[ 1.464031] c3 1 i2c-core: driver [tfa9888] using legacy suspend method
- <4>[ 1.464038] c3 1 i2c-core: driver [tfa9888] using legacy resume method
- <6>[ 1.464057] c3 1 [NFC] pn544_dev_init: Loading pn548 driver
- <6>[ 1.464097] c3 1 [NFC] pn544_probe:
- <6>[ 1.464207] c3 1 [NFC] pn544_probe : vreg_l30 regulator_get
- <6>[ 1.464232] c3 1 [NFC] pn544_probe : vreg_l30 regulator_set_voltage
- <6>[ 1.464243] c3 1 [NFC] pn544_probe : vreg_l30 regulator_enable
- <6>[ 1.464250] c3 1 [NFC] pn544_probe : vreg_l30 regulator_is_enabled = 1
- <6>[ 1.464258] c3 1 [NFC] pn544_parse_dt: Start
- <6>[ 1.464266] c3 1 [NFC] pn544_parse_dt:ven_isinvert = 0
- <6>[ 1.464283] c3 1 [NFC] pn548_htc_check_rfskuid: Check skuid.rf_id done device has NFC chip[NFC] pn544_parse_dt:is_alive = 1
- <6>[ 1.464739] c3 1 [NFC] pn544_parse_dt: Use crystal as Clock Source
- <6>[ 1.464788] c3 1 [NFC] pn544_parse_dt: End, irq_gpio:50, ven_gpio:12, firm_gpio:74
- <6>[ 1.464815] c3 1 [NFC] pn548_htc_get_bootmode: Check bootmode done NFC_BOOT_MODE_NORMAL mode = recovery
- <6>[ 1.464822] c3 1 [NFC] pn544_probe : irq_gpio:50, ven_gpio:12, firm_gpio:74, ven_enable:1
- <6>[ 1.464843] c3 1 [NFC] pn544_probe : irq_gpio set input 0
- <6>[ 1.464863] c3 1 [NFC] pn544_probe : ven_gpio set 0 0
- <6>[ 1.464880] c3 1 [NFC] pn544_probe : firm_gpio set 0 0
- <6>[ 1.464887] c3 1 [NFC] pn544_probe: init io_wake_lock
- <6>[ 1.464961] c3 1 [NFC] pn544_probe : requesting IRQ 364
- <6>[ 1.465112] c3 1 [NFC] pn544_probe: device_create_file for FTM mode+
- <6>[ 1.465131] c3 1 [NFC] pn544_probe: device_create_file for FTM mode done -
- <6>[ 1.465137] c3 1 [NFC] pn544_probe: Turn off NFC VEN by default (bootmode = 0)
- <6>[ 1.465145] c3 1 [NFC] pn544_Disable: gpio=12 set_value=0
- <6>[ 1.465163] c3 1 [NFC] pn544_probe: Probe success! is_alive : 1, is_uicc_swp : 1
- <4>[ 1.465185] c3 1 i2c-core: driver [pn544] using legacy suspend method
- <4>[ 1.465192] c3 1 i2c-core: driver [pn544] using legacy resume method
- <6>[ 1.465212] c3 1 [LSR] STMVL53L0_i2c_init
- <6>[ 1.465505] c3 1 [LSR] Laser_probe++
- <6>[ 1.465769] c3 1 [LSR] Laser_parse_dt: hw_workaround not found
- <6>[ 1.465833] c3 1 [LSR] Laser_parse_dt: pwdn_gpio = 94
- <6>[ 1.465863] c3 1 [LSR] Laser_parse_dt: power_gpio = 989
- <6>[ 1.465973] c3 1 [LSR] Laser_parse_dt: laser_irq_gpio = 106
- <6>[ 1.465993] c3 1 [LSR] Laser_parse_dt: sensor cali_size = 768
- <6>[ 1.466000] c3 1 [LSR] gyro sensor cali_data[100] = 67
- <6>[ 1.466006] c3 1 [LSR] gyro sensor cali_data[101] = 00
- <6>[ 1.466012] c3 1 [LSR] gyro sensor cali_data[102] = 00
- <6>[ 1.466017] c3 1 [LSR] gyro sensor cali_data[103] = 0e
- <6>[ 1.466023] c3 1 [LSR] gyro sensor cali_data[104] = 67
- <6>[ 1.466029] c3 1 [LSR] gyro sensor cali_data[105] = 00
- <6>[ 1.466034] c3 1 [LSR] gyro sensor cali_data[106] = 08
- <6>[ 1.466040] c3 1 [LSR] gyro sensor cali_data[107] = 00
- <6>[ 1.466046] c3 1 [LSR] Laser_parse_dt: Update offset_kvalue = 14
- <6>[ 1.466052] c3 1 [LSR] Laser_parse_dt: Update xtalk_kvalue = 0x8
- <6>[ 1.466375] c3 1 [LSR] Laser_pinctrl_init
- <6>[ 1.466575] c3 1 [LSR] Requesting irq = 420
- <3>[ 1.480650] c3 1 i2c-msm-v2 75ba000.i2c: msm_bus_scale_register_client(mstr-id:84):0x10 (ok)
- <6>[ 1.482239] c3 1 [LSR] Laser_probe: Successful
- <6>[ 1.520390] c3 1 vmem: Up and running with 4 banks of memory from [io size 0x3f07e37cc9 disabled]
- <6>[ 1.523433] c1 6 [cap] cypress_fw_update_get_data
- <6>[ 1.523461] c1 6 [cap] cypress_fw_update_get_data: match
- <6>[ 1.523476] c1 6 [cap] cypress_init_sensor
- <6>[ 1.523490] c1 6 [cap] cypress_get_version
- <3>[ 1.524722] c1 6 i2c-msm-v2 757a000.i2c: msm_bus_scale_register_client(mstr-id:86):0x12 (ok)
- <6>[ 1.525261] c1 6 [cap] Cypress Cap Sensor V20
- <6>[ 1.525280] c1 6 [cap] cypress_get_project_id
- <6>[ 1.525715] c1 6 [cap] Cypress Cap Sensor project ID:0x10
- <6>[ 1.525733] c1 6 [cap] cypress_init_sensor, cs_bootloader_mode = 0
- <6>[ 1.526028] c1 6 input: cypress-cap-sensor as /devices/virtual/input/input5
- <6>[ 1.526250] c1 6 [cap] debug_mask = 02
- <6>[ 1.526901] c1 6 [cap] cypress_cap_probe : Set IRQ 406 falling edge trigger
- <6>[ 1.526929] c1 6 [cap] cypress_start_up_update
- <6>[ 1.526967] c1 6 [cap] cypress_cap_probe: probe success
- <6>[ 1.527487] c1 6 [cap] cypress_cap_init_async: -----
- <5>[ 1.542273] c3 1 msm_actuator_platform_probe:2243 No valid actuator GPIOs data
- <5>[ 1.542447] c3 1 msm_actuator_platform_probe:2243 No valid actuator GPIOs data
- <6>[ 1.543894] c3 1 msm_ois_init_module:1007 [CAM][OIS]Enter
- <6>[ 1.545020] c3 1 msm_ois_platform_probe:858 [CAM][OIS]Enter
- <6>[ 1.545037] c3 1 msm_ois_platform_probe:881 [CAM][OIS]cell-index 0, rc 0
- <6>[ 1.545046] c3 1 msm_ois_platform_probe:889 [CAM][OIS]qcom,cci-master 0, rc 0
- <5>[ 1.545054] c3 1 msm_ois_platform_probe:909 No valid OIS GPIOs data
- <6>[ 1.545163] c3 1 msm_ois_platform_probe:962 [CAM][OIS]Exit
- <6>[ 1.545199] c3 1 msm_ois_platform_probe:858 [CAM][OIS]Enter
- <6>[ 1.545207] c3 1 msm_ois_platform_probe:881 [CAM][OIS]cell-index 1, rc 0
- <6>[ 1.545214] c3 1 msm_ois_platform_probe:889 [CAM][OIS]qcom,cci-master 1, rc 0
- <5>[ 1.545222] c3 1 msm_ois_platform_probe:909 No valid OIS GPIOs data
- <6>[ 1.545288] c3 1 msm_ois_platform_probe:962 [CAM][OIS]Exit
- <6>[ 1.545331] c3 1 msm_flash_init_module:1518 [CAM][FL]Enter
- <6>[ 1.546269] c3 1 msm_flash_platform_probe:1246 [CAM][FL]Enter
- <6>[ 1.546280] c3 1 msm_flash_get_dt_data:1101 [CAM][FL]called
- <6>[ 1.546291] c3 1 msm_flash_get_dt_data:1115 [CAM][FL]subdev id 0
- <6>[ 1.546298] c3 1 msm_flash_get_dt_data:1123 [CAM][FL]msm_flash_get_dt_data qcom,cci-master 0, rc -22
- <6>[ 1.546306] c3 1 msm_flash_get_pmic_source_info:920 [CAM][FL]msm_flash_get_pmic_source_info:920 switch_src_node NULL
- <6>[ 1.546314] c3 1 msm_flash_get_pmic_source_info:945 [CAM][FL]count 2
- <6>[ 1.546320] c3 1 msm_flash_get_pmic_source_info:952 [CAM][FL]msm_flash_get_pmic_source_info:952 flash_num_sources = 2
- <6>[ 1.546523] c3 1 msm_flash_get_pmic_source_info:976 [CAM][FL]default trigger flash0_trigger
- <6>[ 1.546536] c3 1 msm_flash_get_pmic_source_info:1011 [CAM][FL]max_current[0] 625
- <6>[ 1.546564] c3 1 msm_flash_get_pmic_source_info:976 [CAM][FL]default trigger flash1_trigger
- <6>[ 1.546574] c3 1 msm_flash_get_pmic_source_info:1011 [CAM][FL]max_current[1] 625
- <6>[ 1.546582] c3 1 msm_flash_get_pmic_source_info:1020 [CAM][FL]msm_flash_get_pmic_source_info:1020 fctrl->flash_driver_type = 0
- <6>[ 1.546589] c3 1 msm_flash_get_pmic_source_info:1025 [CAM][FL]count 2
- <6>[ 1.546597] c3 1 msm_flash_get_pmic_source_info:1032 [CAM][FL]msm_flash_get_pmic_source_info:1032 torch_num_sources = 2
- <6>[ 1.546617] c3 1 msm_flash_get_pmic_source_info:1056 [CAM][FL]default trigger torch0_trigger
- <6>[ 1.546627] c3 1 msm_flash_get_pmic_source_info:1081 [CAM][FL]max_current[0] 120
- <6>[ 1.546648] c3 1 msm_flash_get_pmic_source_info:1056 [CAM][FL]default trigger torch1_trigger
- <6>[ 1.546657] c3 1 msm_flash_get_pmic_source_info:1081 [CAM][FL]max_current[1] 120
- <6>[ 1.546665] c3 1 msm_flash_get_pmic_source_info:1090 [CAM][FL]msm_flash_get_pmic_source_info:1090 fctrl->flash_driver_type = 0
- <5>[ 1.546673] c3 1 msm_flash_get_dt_data:1144 No valid flash GPIOs data
- <6>[ 1.546682] c3 1 msm_flash_get_dt_data:1154 [CAM][FL]msm_flash_get_dt_data:1154 fctrl->flash_driver_type = 0
- <6>[ 1.547278] c3 1 msm_flash_platform_probe:1303 [CAM][FL]msm_flash_platform_probe:1303 flash sd name = v4l-subdev11msm_torch_create_classdev:118 [CAM][FL]msm_torch_create_classdev:118 msm_torch_brightness_set for torch 0
- <6>[ 1.547369] c3 1 msm_torch_create_classdev:118 [CAM][FL]msm_torch_create_classdev:118 msm_torch_brightness_set for torch 1<6>[ 1.547415] c3 1 msm_flash_platform_probe:1314 [CAM][FL]probe success
- <6>[ 1.547449] c3 1 msm_flash_platform_probe:1246 [CAM][FL]Enter
- <6>[ 1.547455] c3 1 msm_flash_get_dt_data:1101 [CAM][FL]called
- <6>[ 1.547465] c3 1 msm_flash_get_dt_data:1115 [CAM][FL]subdev id 0
- <6>[ 1.547472] c3 1 msm_flash_get_dt_data:1123 [CAM][FL]msm_flash_get_dt_data qcom,cci-master 0, rc -22
- <6>[ 1.547480] c3 1 msm_flash_get_pmic_source_info:920 [CAM][FL]msm_flash_get_pmic_source_info:920 switch_src_node NULL
- <6>[ 1.547486] c3 1 msm_flash_get_pmic_source_info:945 [CAM][FL]count 2
- <6>[ 1.547493] c3 1 msm_flash_get_pmic_source_info:952 [CAM][FL]msm_flash_get_pmic_source_info:952 flash_num_sources = 2
- <6>[ 1.547526] c3 1 msm_flash_get_pmic_source_info:976 [CAM][FL]default trigger flash0_trigger
- <6>[ 1.547536] c3 1 msm_flash_get_pmic_source_info:1011 [CAM][FL]max_current[0] 625
- <4>[ 1.547544] c3 1 LED trigger flash0_trigger failed to register (-17)
- <6>[ 1.547564] c3 1 msm_flash_get_pmic_source_info:976 [CAM][FL]default trigger flash1_trigger
- <6>[ 1.547571] c3 1 msm_flash_get_pmic_source_info:1011 [CAM][FL]max_current[1] 625
- <4>[ 1.547578] c3 1 LED trigger flash1_trigger failed to register (-17)
- <6>[ 1.547584] c3 1 msm_flash_get_pmic_source_info:1020 [CAM][FL]msm_flash_get_pmic_source_info:1020 fctrl->flash_driver_type = 0
- <6>[ 1.547590] c3 1 msm_flash_get_pmic_source_info:1025 [CAM][FL]count 2
- <6>[ 1.547598] c3 1 msm_flash_get_pmic_source_info:1032 [CAM][FL]msm_flash_get_pmic_source_info:1032 torch_num_sources = 2
- <6>[ 1.547616] c3 1 msm_flash_get_pmic_source_info:1056 [CAM][FL]default trigger torch0_trigger
- <6>[ 1.547627] c3 1 msm_flash_get_pmic_source_info:1081 [CAM][FL]max_current[0] 120
- <4>[ 1.547634] c3 1 LED trigger torch0_trigger failed to register (-17)
- <6>[ 1.547652] c3 1 msm_flash_get_pmic_source_info:1056 [CAM][FL]default trigger torch1_trigger
- <6>[ 1.547659] c3 1 msm_flash_get_pmic_source_info:1081 [CAM][FL]max_current[1] 120
- <4>[ 1.547666] c3 1 LED trigger torch1_trigger failed to register (-17)
- <6>[ 1.547672] c3 1 msm_flash_get_pmic_source_info:1090 [CAM][FL]msm_flash_get_pmic_source_info:1090 fctrl->flash_driver_type = 0
- <5>[ 1.547678] c3 1 msm_flash_get_dt_data:1144 No valid flash GPIOs data
- <6>[ 1.547686] c3 1 msm_flash_get_dt_data:1154 [CAM][FL]msm_flash_get_dt_data:1154 fctrl->flash_driver_type = 0
- <6>[ 1.547742] c3 1 msm_flash_platform_probe:1303 [CAM][FL]msm_flash_platform_probe:1303 flash sd name = v4l-subdev12<3>[ 1.547752] c3 1 msm_torch_create_classdev:130 Invalid fctrl->torch_trigger[0]
- <6>[ 1.547757] c3 1 msm_flash_platform_probe:1314 [CAM][FL]probe success
- <4>[ 1.547773] c3 1 qcom,camera-flash: probe of soc:qcom,camera-flash@1 failed with error -22
- <6>[ 1.548081] c3 1 msm_led_trigger_sysfs_init:1452 [CAM][FL] msm_led_trigger_sysfs_init:1452
- <6>[ 1.548107] c3 1 msm_led_trigger_sysfs_init:1504 [CAM][FL] msm_led_trigger_sysfs_init:1504 ret 0
- <6>[ 1.548114] c3 1 msm_flash_init_module:1525 msm_flash_init_module:1525 rc 0
- <3>[ 1.563622] c3 1 CAM-SOC msm_camera_get_reg_base:787 err: mem resource vfe_fuse not found
- <3>[ 1.563648] c3 1 CAM-SOC msm_camera_get_res_size:830 err: mem resource vfe_fuse not found
- <3>[ 1.565160] c3 1 CAM-SOC msm_camera_get_reg_base:787 err: mem resource vfe_fuse not found
- <3>[ 1.565170] c3 1 CAM-SOC msm_camera_get_res_size:830 err: mem resource vfe_fuse not found
- <3>[ 1.575761] c3 1 __msm_jpeg_init:1537] Jpeg Device id 0
- <3>[ 1.577144] c3 1 __msm_jpeg_init:1537] Jpeg Device id 2__msm_jpeg_init:1537] Jpeg Device id 3
- <3>[ 1.583706] c3 1 msm_fd_hw_set_dt_parms_by_name: Error property does not exist
- <3>[ 1.683434] c3 1 msm_fd aa4000.qcom,fd: Face detection halt timeout
- <6>[ 1.688790] c1 6 FG: fg_check_ima_exception: Initial ima_err_sts=0 ima_exp_sts=0 ima_hw_sts=22
- <4>[ 1.688913] c1 6 ------------[ cut here ]------------
- <4>[ 1.688951] c1 6 WARNING: CPU: 1 PID: 6 at ../include/linux/of.h:770 fg_probe+0x28c8/0x2a54()
- <4>[ 1.688967] c1 6 Modules linked in:
- <4>[ 1.688995] c1 6 CPU: 1 PID: 6 Comm: kworker/u8:0 Not tainted 3.18.63-BeyondStockᵀᴹ-Recovery-pme-Oreo-gad83436-dirty #2
- <4>[ 1.689012] c1 6 Hardware name: HTC Corporation. MSM8996v3 PME PVT (DT)
- <4>[ 1.689045] c1 6 Workqueue: events_unbound async_run_entry_fn
- <0>[ 1.689065] c1 6 Call trace:
- <4>[ 1.689091] c1 6 [<ffffffc000089ec0>] dump_backtrace+0x0/0x158
- <4>[ 1.689109] c1 6 [<ffffffc00008a02c>] show_stack+0x14/0x1c
- <4>[ 1.689133] c1 6 [<ffffffc000f447fc>] dump_stack+0x84/0xa8
- <4>[ 1.689157] c1 6 [<ffffffc0000a4fc4>] warn_slowpath_common+0x8c/0xb4
- <4>[ 1.689176] c1 6 [<ffffffc0000a5110>] warn_slowpath_null+0x18/0x20
- <4>[ 1.689193] c1 6 [<ffffffc0009cbf70>] fg_probe+0x28c8/0x2a54
- <4>[ 1.689215] c1 6 [<ffffffc000b00378>] spmi_drv_probe+0x14/0x1c
- <4>[ 1.689240] c1 6 [<ffffffc00060d96c>] driver_probe_device+0x164/0x354
- <4>[ 1.689257] c1 6 [<ffffffc00060dbc0>] __driver_attach+0x64/0x90
- <4>[ 1.689274] c1 6 [<ffffffc00060b994>] bus_for_each_dev+0x74/0xb0
- <4>[ 1.689289] c1 6 [<ffffffc00060d35c>] driver_attach+0x20/0x28
- <4>[ 1.689305] c1 6 [<ffffffc00060ce4c>] bus_add_driver+0x138/0x248
- <4>[ 1.689321] c1 6 [<ffffffc00060e754>] driver_register+0x94/0xe0
- <4>[ 1.689336] c1 6 [<ffffffc000b006b4>] spmi_driver_register+0x5c/0x64
- <4>[ 1.689359] c1 6 [<ffffffc0015de0e8>] fg_init_async+0x18/0x20
- <4>[ 1.689374] c1 6 [<ffffffc0000c3850>] async_run_entry_fn+0x80/0x16c
- <4>[ 1.689399] c1 6 [<ffffffc0000bc464>] process_one_work+0x238/0x414
- <4>[ 1.689415] c1 6 [<ffffffc0000bcb74>] worker_thread+0x28c/0x3b8
- <4>[ 1.689434] c1 6 [<ffffffc0000c0efc>] kthread+0xe8/0xf0
- <4>[ 1.689526] c1 6 ---[ end trace ecd540a81f6bd548 ]---
- <6>[ 1.691149] c3 1 [BATT] Probe process: (2, 1)
- <6>[ 1.691228] c0 54 [BATT] htc_battery_fb_register in
- <6>[ 1.691229] c3 1 [BATT] htc_battery_init done.
- <6>[ 1.693255] c3 6 FG: fg_probe: FG Probe success - FG Revision DIG:3.1 ANA:1.2 PMIC subtype=19
- <6>[ 1.694354] c3 1 htc-charger soc:htc,htc-charger: qcom,charger-enable-gpio: 988
- <6>[ 1.694776] c3 1 htc-charger soc:htc,htc-charger: qcom,charger-ready-gpio: 993
- <3>[ 1.694889] c3 1 htc-charger soc:htc,htc-charger: qcom,adc-sw-sel-gpio not valid: -2
- <6>[ 1.695345] c3 1 htc-charger soc:htc,htc-charger: vadc_usb_in_isen_channel: 17
- <6>[ 1.695583] c3 1 htc-charger soc:htc,htc-charger: vadc_vbusdet_channel: 20
- <6>[ 1.695741] c3 55 FG: update_irq_volt_empty: voltage = 3100, converted_raw = 003d
- <6>[ 1.695984] c3 1 htc-charger soc:htc,htc-charger: vadc_usb_pwr_temp_channel: 22
- <6>[ 1.696095] c3 1 htc-charger soc:htc,htc-charger: iusb_rsen: 1400
- <6>[ 1.696116] c3 1 htc-charger soc:htc,htc-charger: iusb_multiplier: 2050
- <6>[ 1.696392] c3 1 htc-charger soc:htc,htc-charger: == HTCCHG Parameters ==
- <6>[ 1.696510] c3 1 htc-charger soc:htc,htc-charger: run_mode: 0
- <3>[ 1.696654] c3 1 htc-charger soc:htc,htc-charger: Failed to get auth_chk_ms
- <3>[ 1.696675] c3 1 htc-charger soc:htc,htc-charger: Failed to get opti_chk_ms
- <3>[ 1.696801] c2 1 htc-charger soc:htc,htc-charger: Failed to get runup_chk_ms
- <3>[ 1.696821] c2 1 htc-charger soc:htc,htc-charger: Failed to get auth_switch_ms
- <3>[ 1.696841] c2 1 htc-charger soc:htc,htc-charger: Failed to get ibat_ma_cc
- <3>[ 1.696861] c2 1 htc-charger soc:htc,htc-charger: Failed to get ibat_ma_mtg
- <3>[ 1.696879] c2 1 htc-charger soc:htc,htc-charger: Failed to get ibat_ma_rtn
- <3>[ 1.696899] c2 1 htc-charger soc:htc,htc-charger: Failed to get v_step_ms
- <3>[ 1.696919] c2 1 htc-charger soc:htc,htc-charger: Failed to get i_step_ms
- <3>[ 1.696937] c2 1 htc-charger soc:htc,htc-charger: Failed to get soc_min
- <3>[ 1.696955] c2 1 htc-charger soc:htc,htc-charger: Failed to get soc_max
- <3>[ 1.696972] c2 1 htc-charger soc:htc,htc-charger: Failed to get soc_stress
- <3>[ 1.696990] c2 1 htc-charger soc:htc,htc-charger: Failed to get stress_ms
- <3>[ 1.697006] c2 1 htc-charger soc:htc,htc-charger: Failed to get vbat_mv_resume
- <3>[ 1.697023] c2 1 htc-charger soc:htc,htc-charger: Failed to get vbat_mv_max
- <3>[ 1.697040] c2 1 htc-charger soc:htc,htc-charger: Failed to get vbat_mv_stop
- <3>[ 1.697057] c2 1 htc-charger soc:htc,htc-charger: Failed to get vusb_mv_cc
- <3>[ 1.697073] c2 1 htc-charger soc:htc,htc-charger: Failed to get vusb_mv_cc_l
- <3>[ 1.697089] c2 1 htc-charger soc:htc,htc-charger: Failed to get vusb_mv_cc_h
- <3>[ 1.697105] c2 1 htc-charger soc:htc,htc-charger: Failed to get vusb_mv_min
- <3>[ 1.697121] c2 1 htc-charger soc:htc,htc-charger: Failed to get vusb_mv_start
- <3>[ 1.697138] c2 1 htc-charger soc:htc,htc-charger: Failed to get vusb_mv_stop
- <3>[ 1.697154] c2 1 htc-charger soc:htc,htc-charger: Failed to get vusb_mv_mtg
- <3>[ 1.697170] c2 1 htc-charger soc:htc,htc-charger: Failed to get iusb_ma_min
- <3>[ 1.697190] c2 1 htc-charger soc:htc,htc-charger: Failed to get iusb_ma_max
- <3>[ 1.697207] c2 1 htc-charger soc:htc,htc-charger: Failed to get iusb_count
- <3>[ 1.697222] c2 1 htc-charger soc:htc,htc-charger: Failed to get vusb_count
- <3>[ 1.697239] c2 1 htc-charger soc:htc,htc-charger: Failed to get temp_leave
- <3>[ 1.697256] c2 1 htc-charger soc:htc,htc-charger: Failed to get temp_runup
- <3>[ 1.697271] c2 1 htc-charger soc:htc,htc-charger: Failed to get temp_slope
- <3>[ 1.697287] c2 1 htc-charger soc:htc,htc-charger: Failed to get temp_runup_cnt
- <3>[ 1.697304] c2 1 htc-charger soc:htc,htc-charger: Failed to get temp_enter
- <3>[ 1.697319] c2 1 htc-charger soc:htc,htc-charger: Failed to get temp_resume
- <3>[ 1.697336] c2 1 htc-charger soc:htc,htc-charger: Failed to get temp_stop_warm
- <3>[ 1.697352] c2 1 htc-charger soc:htc,htc-charger: Failed to get temp_stop_hot
- <6>[ 1.697918] c2 1 htc-charger soc:htc,htc-charger: HTC Charger successfully probed.
- <6>[ 1.697941] c2 1 htc-charger soc:htc,htc-charger: htcchg_debug_mask=0x6
- <3>[ 1.697965] c2 1 HTCCHG: htcchg_pinctrl_control: Target does not use pinctrl
- <3>[ 1.697982] c2 1 htc-charger soc:htc,htc-charger: pinctrl error, rc=-22
- <6>[ 1.700163] c2 1 set_restart_reason: set restart reason = 776655aa
- <6>[ 1.700197] c2 1 set_restart_msg: set restart msg = `Unknown'
- <3>[ 1.702528] c2 1 unable to find DT imem DLOAD mode node
- <3>[ 1.705005] c2 1 unable to find DT imem EDLOAD mode node
- <6>[ 1.742303] c3 1 device-mapper: uevent: version 1.0.3
- <6>[ 1.742524] c3 1 device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
- <6>[ 1.742652] c3 1 device-mapper: req-crypt: dm-req-crypt successfully initalized.
- <6>[ 1.742652] c3 1
- <4>[ 1.744729] c3 1 bt_power bt_qca6174: no qca,bt-vdd-pa-voltage-level property
- <6>[ 1.744748] c3 1 bt_dt_parse_vreg_info: qca,bt-vdd-ldo: is not provided in device tree
- <6>[ 1.744755] c3 1 bt_dt_parse_vreg_info: qca,bt-chip-pwd: is not provided in device tree
- <6>[ 1.745918] c3 1 [BT] == rfkill_probe ==
- <6>[ 1.745950] c3 1 fd=29, apply=23
- <6>[ 1.745956] c3 1 fd=14, state=bf
- <6>[ 1.745962] c3 1 fd=7a, status=80
- <6>[ 1.745993] c3 1 [BT] bt-regon-gpio: 1021
- <4>[ 1.746080] c3 1 [BT] Init GPIO pins
- <6>[ 1.748158] c3 1 [BT] msm_hs_uart_gpio_config_ext: set gpio_state_suspend
- <6>[ 1.748239] c3 1 [BT] == R OFF ==
- <6>[ 1.749669] c3 1 Bluetooth: bluesleep_init: BlueSleep Mode Driver Ver 1.1
- <6>[ 1.750459] c3 1 Bluetooth: bluesleep_populate_dt_pinfo: bt_host_wake 117, bt_ext_wake 118
- <6>[ 1.750509] c3 1 Bluetooth: bluesleep_probe: host_wake_irq 431, polarity 0
- <6>[ 1.751774] c3 1 Bluetooth: bluesleep_init: BlueSleep Mode Driver Initialized
- <6>[ 1.751946] c3 1 sdhci: Secure Digital Host Controller Interface driver
- <6>[ 1.751953] c3 1 sdhci: Copyright(c) Pierre Ossman
- <6>[ 1.751964] c3 1 sdhci-pltfm: SDHCI platform and OF driver helper
- <6>[ 1.752334] c3 1 [LED]led driver probe
- <6>[ 1.752364] c3 1 [LED] check_power_source, pid = 403, pcb_id = 128
- <6>[ 1.752372] c3 1 [LED]button-backlight not use power source 0xa000
- <6>[ 1.752395] c3 1 [LED]led driver probe
- <6>[ 1.752413] c3 1 [LED] check_power_source, pid = 403, pcb_id = 128
- <6>[ 1.753131] c3 1 qpnp_lpg_calc_period: LPG channel '3' pwm size is forced to=9
- <6>[ 1.753536] c3 1 [LED]get_brightness_mapping_table, vk-pwm-array table_level_num: 11
- <6>[ 1.753548] c3 1 [LED]Get cmdline success
- <6>[ 1.753567] c3 1 [LED]color_ID match BLK00, use color_ID: 1, touch_solution = 2
- <6>[ 1.753591] c3 1 [LED]led id = 6, array index = 0
- <6>[ 1.753597] c3 1 [LED]led driver probe --
- <6>[ 1.753640] c3 1 [LED]led driver probe
- <6>[ 1.754091] c3 1 [LED]led id = 3, array index = 0
- <6>[ 1.754488] c3 1 [LED]led id = 4, array index = 1
- <6>[ 1.754779] c3 1 [LED]led id = 9, array index = 2
- <6>[ 1.754786] c3 1 [LED]led driver probe --
- <6>[ 1.756225] c0 6 qcom_ice_get_pdevice: found ice device ffffffc031c25a00
- <6>[ 1.756241] c0 6 qcom_ice_get_pdevice: matching platform device ffffffc0f8008000
- <3>[ 1.757414] c0 6 sdhci_msm 7464900.sdhci: Could not get active SDR104 pinstates, err:-19
- <3>[ 1.757437] c0 6 sdhci_msm 7464900.sdhci: Parsing Pinctrl failed with -19, falling back on GPIO lib
- <6>[ 1.761692] c0 6 qcom_ice 7443000.sdcc1ice: QC ICE 2.1.44 device found @0xffffff8002450000
- <6>[ 1.762384] c0 6 sdhci_msm 7464900.sdhci: No vmmc regulator found
- <6>[ 1.762398] c0 6 sdhci_msm 7464900.sdhci: No vqmmc regulator found
- <6>[ 1.763059] c0 6 mmc0: SDHCI controller on 7464900.sdhci [7464900.sdhci] using 64-bit ADMA in CMDQ mode
- <4>[ 1.799299] c1 6 sdhci_msm 74a4900.sdhci: sdhci_msm_probe: ICE device is not enabled
- <6>[ 1.802290] c1 6 sdhci_msm 74a4900.sdhci: Could get active SDR104 pinstates
- <6>[ 1.819862] c0 6 sdhci_msm 74a4900.sdhci: No vmmc regulator found
- <6>[ 1.819895] c0 6 sdhci_msm 74a4900.sdhci: No vqmmc regulator found
- <6>[ 1.820639] c0 6 mmc1: SDHCI controller on 74a4900.sdhci [74a4900.sdhci] using 64-bit ADMA in legacy mode
- <6>[ 1.820943] c2 361 SD : Enabling slot power
- <6>[ 1.837630] c0 54 mmc0: Out-of-interrupt timeout is 100[ms]
- <6>[ 1.837646] c0 54 mmc0: BKOPS_EN equals 0x2
- <6>[ 1.837655] c0 54 mmc0: eMMC FW version: 0x32
- <6>[ 1.837663] c0 54 mmc0: CMDQ limit depth: 32 -> 16
- <6>[ 1.837671] c0 54 mmc0: CMDQ supported: depth: 16
- <6>[ 1.837679] c0 54 mmc0: cache barrier support 1 flush policy 1
- <4>[ 1.837687] c0 54 mmc_read_ext_csd: ext_csd[EXT_CSD_FFU_FEATURES]=0
- <6>[ 1.837696] c0 54 mmc0: cid 450100444634303332013fd8684a3300
- <6>[ 1.837704] c0 54 mmc0: csd d00f00328f5903ffffffffef8a404000
- <6>[ 1.837716] c0 54 mmc0: ext_csd_511 000000000000000101013f3f01030305
- <6>[ 1.837727] c0 54 mmc0: ext_csd_495 00030300100000000001000000000000
- <6>[ 1.837737] c0 54 mmc0: ext_csd_479 00000000000000000000000000000000
- <6>[ 1.837746] c0 54 mmc0: ext_csd_463 00000000000000000000000000000000
- <6>[ 1.837756] c0 54 mmc0: ext_csd_447 00000000000000000000000000000000
- <6>[ 1.837765] c0 54 mmc0: ext_csd_431 00000000000000000000000000000000
- <6>[ 1.837774] c0 54 mmc0: ext_csd_415 00000000000000000000000000000000
- <6>[ 1.837784] c0 54 mmc0: ext_csd_399 00000000000000000000000000000000
- <6>[ 1.837793] c0 54 mmc0: ext_csd_383 00000000000000000000000000000000
- <6>[ 1.837802] c0 54 mmc0: ext_csd_367 00000000000000000000000000000000
- <6>[ 1.837811] c0 54 mmc0: ext_csd_351 00000000000000000000000000000000
- <6>[ 1.837821] c0 54 mmc0: ext_csd_335 00000000000000000000000000000000
- <6>[ 1.837830] c0 54 mmc0: ext_csd_319 0000000000000000000000011f000000
- <6>[ 1.837839] c0 54 mmc0: ext_csd_303 00000000000000000000000000000000
- <6>[ 1.837849] c0 54 mmc0: ext_csd_287 00000000000000000000000000000000
- <6>[ 1.837858] c0 54 mmc0: ext_csd_271 00000101010808085341202031313032
- <6>[ 1.837868] c0 54 mmc0: ext_csd_255 3032dd00001000191901000000025a01
- <6>[ 1.837878] c0 54 mmc0: ext_csd_239 00dddd000000000355a6a60700200801
- <6>[ 1.837887] c0 54 mmc0: ext_csd_223 030110080717121703a3e000010a0a0a
- <6>[ 1.837897] c0 54 mmc0: ext_csd_207 0a0a0a000000dddd030a1f5700020008
- <6>[ 1.837906] c0 54 mmc0: ext_csd_191 000000000d0000010000000000000000
- <6>[ 1.837916] c0 54 mmc0: ext_csd_175 00000000100000201f15000002010007
- <6>[ 1.837925] c0 54 mmc0: ext_csd_159 00049200000000000000000000000000
- <6>[ 1.837935] c0 54 mmc0: ext_csd_143 00000000000000000000000000010000
- <6>[ 1.837944] c0 54 mmc0: ext_csd_127 00000000000000020000000000000000
- <6>[ 1.837954] c0 54 mmc0: ext_csd_111 00000000000000000000000000000000
- <6>[ 1.837963] c0 54 mmc0: ext_csd_095 02000400000000000000030000000000
- <6>[ 1.837972] c0 54 mmc0: ext_csd_079 00000000000000000000000000000000
- <6>[ 1.837982] c0 54 mmc0: ext_csd_063 0000000a000000000000000000000000
- <6>[ 1.837991] c0 54 mmc0: ext_csd_047 00000000000000000000000000000000
- <6>[ 1.838000] c0 54 mmc0: ext_csd_031 010000000000000000000133e4c80308
- <6>[ 1.838010] c0 54 mmc0: ext_csd_015 00000000000000000000000000000000
- <6>[ 1.838021] c0 54 mmc0: SanDisk: 202011
- <6>[ 1.845891] c0 54 cmdq_host_alloc_tdl: desc_size: 768 data_sz: 253952 slot-sz: 24
- <6>[ 1.846142] c0 54 desc-base: 0xffffff800247b000 trans-base: 0xffffff80024c1000
- <6>[ 1.846142] c0 54 desc_dma 0xf7899000 trans_dma: 0xf79c0000
- <6>[ 1.846199] c0 54 mmc0: CMDQ enabled on card
- <6>[ 1.846218] c0 54 mmc0: new HS400 MMC card at address 0001
- <6>[ 1.846868] c0 54 sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0x3) latency=70 (0xffffffc0f32a0700)
- <6>[ 1.846898] c0 54 sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xc) latency=70 (0xffffffc0f32a0708)
- <6>[ 1.847143] c0 54 mmcblk0: mmc0:0001 DF4032 29.1 GiB
- <6>[ 1.847298] c0 54 mmcblk0rpmb: mmc0:0001 DF4032 partition 3 4.00 MiB
- <4>[ 1.849764] c0 54 Alternate GPT is invalid, using primary GPT.
- <6>[ 1.849864] c0 54 mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39 p40 p41 p42 p43 p44 p45 p46 p47 p48 p49 p50 p51 p52 p53 p54 p55 p56 p57 p58 p59 p60 p61 p62 p63 p64 p65 p66 p67
- <6>[ 1.854092] c1 1 qpnp_wled_parse_dt: low setting=10000, watermark=561
- <6>[ 1.856926] c1 1 register_htc_flashlight: id 1 registered for (qpnp_wled_flash_mode+0x0/0x24, qpnp_wled_torch_mode+0x0/0x24)
- <6>[ 1.857229] c1 1 hidraw: raw HID events driver (C) Jiri Kosina
- <6>[ 1.857702] c1 1 usbcore: registered new interface driver usbhid
- <6>[ 1.857718] c1 1 usbhid: USB HID core driver
- <6>[ 1.858908] c1 1 [S_HUB] mcu_spi_prb++: Do not call iio_push_to_buffers when !pseudo_irq_enable
- <6>[ 1.859011] c1 1 [S_HUB] gs_kvalue = 6703f4f2
- <6>[ 1.859021] c1 1 [S_HUB] gy_kvalue = 67000000
- <6>[ 1.859029] c1 1 [S_HUB] als_kvalue = 6da50293
- <6>[ 1.859038] c1 1 [S_HUB] ps_kheader = 50530306, ps_kvalue = 0014002a
- <6>[ 1.859047] c1 1 [S_HUB] bs_kheader = 00000000, bs_kvalue = 00000000
- <6>[ 1.859827] c1 1 [S_HUB] mcu_parse_dt: touch_enable = 1
- <6>[ 1.859845] c1 1 [S_HUB] mcu_parse_dt: vibrate_ms = 25
- <6>[ 1.859855] c1 1 [S_HUB] mcu_parse_dt: acceleration axes = 7
- <6>[ 1.859864] c1 1 [S_HUB] mcu_parse_dt: Compass axes = 7
- <6>[ 1.859872] c1 1 [S_HUB] mcu_parse_dt: gyro axes = 7
- <6>[ 1.859881] c1 1 [S_HUB] mcu_parse_dt: als_goldl = 0xfa
- <6>[ 1.859890] c1 1 [S_HUB] mcu_parse_dt: als_goldh = 0x3
- <6>[ 1.859899] c1 1 [S_HUB] mcu_parse_dt: ps_thd_add = 0x28
- <6>[ 1.859908] c1 1 [S_HUB] mcu_parse_dt: ps_thd_fixed = 0x15
- <6>[ 1.859917] c1 1 [S_HUB] mcu_parse_dt: als_polling = 1
- <6>[ 1.859930] c1 1 [S_HUB] mcu_parse_dt: ps_info = 0x1
- <3>[ 1.859940] c1 1 [S_HUB] mcu_parse_dt: als_oc_protect not found
- <6>[ 1.860492] c1 1 [S_HUB] mcu_parse_dt: Set v_sr_2v85 to HPM success
- <6>[ 1.860762] c1 1 [S_HUB] mcu_parse_dt: Set v_srio_1v8 to HPM success
- <6>[ 1.860780] c1 1 [S_HUB] mcu_parse_dt: need_notify_display = 1
- <6>[ 1.860790] c1 1 [S_HUB] mcu_parse_dt: need_compass_filter = 0
- <3>[ 1.860841] c1 1 [S_HUB] CWMCU_probe_init : request cwmcu_status
- <6>[ 1.860870] c1 1 [S_HUB] mcu_prb: gpio_mcu_status_level:0
- <6>[ 1.860951] c1 1 [S_HUB] mcu_pinctrl_init
- <6>[ 1.863654] c1 1 [S_HUB] CWMCU_probe_init success!
- <6>[ 1.863686] c1 1 [S_HUB] CWMCU_spi_probe success!
- <6>[ 1.863693] c1 1 [S_HUB] dl_spi_prb
- <6>[ 1.863760] c1 1 [S_HUB] fw_fla_prb
- <6>[ 1.863898] c1 167 [S_HUB] rst_hub: gpio_rst = 0
- <6>[ 1.863973] c2 54 mmc1: mmc_rescan rescan_disable 0 nonremovable 0 rescan_entered 0
- <6>[ 1.864593] c1 1 ashmem: initialized
- <6>[ 1.864859] c1 1 qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=2100 ohm
- <6>[ 1.867123] c1 1 [VIB] qpnp_haptic_probe: ++
- <6>[ 1.867612] c1 1 [VIB] Set Vmax=2828, reg=0x30
- <7>[ 1.868446] c1 1 Registered vibrator trigger enabler: qpnp-haptic
- <6>[ 1.868700] c1 1 [VIB] qpnp_haptic_probe: --, play_mode=0
- <6>[ 1.878990] c1 167 [S_HUB] rst_hub: gpio_rst = 1
- <6>[ 1.880885] c3 1 bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
- <6>[ 1.882519] c3 1 arm-memlat-mon soc:qcom,arm-memlat-mon-0: Memory Latency governor registered.
- <6>[ 1.882571] c3 1 arm-memlat-mon soc:qcom,arm-memlat-mon-2: Memory Latency governor registered.
- <6>[ 1.885668] c3 1 m4m-hwmon 6530000.qcom,m4m-hwmon: Cache HWmon governor registered.
- <3>[ 1.890216] c3 1 devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
- <3>[ 1.890371] c3 1 devfreq soc:qcom,mincpubw: Couldn't update frequency transition information.
- <3>[ 1.890503] c3 1 devfreq soc:qcom,memlat-cpu0: Couldn't update frequency transition information.
- <3>[ 1.890635] c3 1 devfreq soc:qcom,memlat-cpu2: Couldn't update frequency transition information.
- <3>[ 1.891868] c3 1 devfreq soc:qcom,m4m: Couldn't update frequency transition information.
- <6>[ 1.895053] c3 1 [NC] == NC_probe ==
- <6>[ 1.895068] c3 1 [NC] Init GPIO pins
- <6>[ 1.895248] c3 1 sysinfo_proc_init: Init HTC system info proc interface.
- <3>[ 1.896472] c3 1 sensors-ssc soc:qcom,msm-ssc-sensors: msm_ssc_sensors_dt_parse: get qdsp timer cntpct hi offset fail
- <6>[ 1.896482] c3 1 sensors-ssc soc:qcom,msm-ssc-sensors: slpi_loader_init_sysfs: Could not parse dt
- <6>[ 1.896967] c3 1 Trustonic (null): mobicore_init: MobiCore mcDrvModuleApi version is 2.1
- <6>[ 1.897313] c3 1 Trustonic TEE: mobicore_probe: MobiCore t-base-QC-MSM8996-Android-310A-V002-20151016_104913_950
- <6>[ 1.897918] c3 1 [smem]htc_radio_smem_init.
- <6>[ 1.898419] c3 1 [smem]htc_radio_smem_probe: start.
- <6>[ 1.898454] c3 1 [smem]htc_radio_smem_probe: smem_via_smd=0xffffff8000610130, secure_smem=0xffffff8000610930.
- <6>[ 1.898510] c3 1 [smem]check_smlog_alloc: smlog is disabled.
- <6>[ 1.898516] c3 1 [smem]set_smlog_magic: smlog_magic:0x0, smlog_base:0x0, smlog_size:0x0.
- <6>[ 1.898527] c3 1 [smem]htc_radio_smem_write: RCMS NAME=, SKU_NAME=, version=0x20140901, size=2048, boot_mode=8, radioflag=0x0, radioflagex1=0x0, radioflagex2=0x0
- <6>[ 1.898532] c3 1 [smem]htc_radio_smem_probe: end.
- <6>[ 1.898780] c3 1 sysinfo_proc_init: Init HTC Debug Flag proc interface.
- <6>[ 1.898788] c3 1 init_from_device_tree - length: 64
- <6>[ 1.898794] c3 1 init_from_device_tree - loglevel: FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF
- <6>[ 1.898813] c3 1 [SECURITY] msm_serial_proc_init: Init HTC msm-serial proc interface.
- <6>[ 1.898820] c3 1 [SECURITY] init_from_device_tree - length: 21
- <6>[ 1.898825] c3 1 [SECURITY] init_from_device_tree - LABEL_MSM_SERIAL_NUM: 953244639
- <6>[ 1.898967] c3 1 usbcore: registered new interface driver snd-usb-audio
- <3>[ 1.901719] c3 1 msm8996-pinctrl 1010000.pinctrl: pin GPIO_69 already requested by soc:htc,htc_nc_pins; cannot claim for soc:audio_ext_clk
- <3>[ 1.901733] c3 1 msm8996-pinctrl 1010000.pinctrl: pin-69 (soc:audio_ext_clk) status -22
- <3>[ 1.901741] c3 1 msm8996-pinctrl 1010000.pinctrl: could not request pin 69 (GPIO_69) from group gpio69 on device 1010000.pinctrl
- <3>[ 1.901747] c3 1 audio-ref-clk soc:audio_ext_clk: Error applying setting, reverse things back
- <3>[ 1.901754] c3 1 audio-ref-clk soc:audio_ext_clk: audio_get_pinctrl: Disable TLMM pins failed with -22
- <6>[ 1.903188] c3 1 [AUD] snd_soc_tfa98xx: TFA98XX driver version 2.10.1-a
- <6>[ 1.903236] c3 1 [AUD] snd_soc_tfa98xx: tfa98xx_i2c_probe
- <3>[ 1.903887] c3 1 i2c-msm-v2 75b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0x23 (ok)
- <6>[ 1.904165] c3 1 [AUD] snd_soc_tfa98xx: TFA9888 detected
- <6>[ 1.904188] c3 1 tfa98xx 7-0034: Skipping IRQ registration
- <6>[ 1.904242] c3 1 [AUD] snd_soc_tfa98xx: tfa98xx_i2c_probe Probe completed successfully!
- <3>[ 1.914567] c3 1 msm-dai-q6-mi2s soc:qcom,msm-dai-mi2s:qcom,msm-dai-q6-mi2s-sec: msm_dai_q6_mi2s_dev_probe: missing 0x0 in dt node
- <4>[ 1.914586] c3 1 msm-dai-q6-mi2s: probe of soc:qcom,msm-dai-mi2s:qcom,msm-dai-q6-mi2s-sec failed with error -22
- <3>[ 1.914778] c3 1 msm-dai-q6-mi2s soc:qcom,msm-dai-mi2s:qcom,msm-dai-q6-mi2s-tert: msm_dai_q6_mi2s_dev_probe: missing 0x0 in dt node
- <4>[ 1.914788] c3 1 msm-dai-q6-mi2s: probe of soc:qcom,msm-dai-mi2s:qcom,msm-dai-q6-mi2s-tert failed with error -22
- <6>[ 1.917798] c3 1 msm-dai-tdm soc:qcom,msm-dai-tdm-sec-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx group_id: 0x9111
- <6>[ 1.918153] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0 dev_id: 0x9011
- <6>[ 1.918165] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- <6>[ 1.918376] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-1 dev_id: 0x9013
- <6>[ 1.918387] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- <6>[ 1.918585] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-2 dev_id: 0x9015
- <6>[ 1.918596] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- <6>[ 1.918790] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-3 dev_id: 0x9017
- <6>[ 1.918800] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- <6>[ 1.918826] c3 1 msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120
- <6>[ 1.919015] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020
- <6>[ 1.919027] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- <6>[ 1.919217] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1 dev_id: 0x9022
- <6>[ 1.919228] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- <6>[ 1.919424] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2 dev_id: 0x9024
- <6>[ 1.919435] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- <6>[ 1.919627] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3 dev_id: 0x9026
- <6>[ 1.919638] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- <6>[ 1.919664] c3 1 msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121
- <6>[ 1.919857] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021
- <6>[ 1.919868] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- <6>[ 1.920110] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1 dev_id: 0x9023
- <6>[ 1.920121] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- <6>[ 1.920323] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2 dev_id: 0x9025
- <6>[ 1.920334] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- <6>[ 1.920526] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3 dev_id: 0x9027
- <6>[ 1.920538] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- <6>[ 1.920565] c3 1 msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130
- <6>[ 1.920755] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030
- <6>[ 1.920766] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- <6>[ 1.920961] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1 dev_id: 0x9032
- <6>[ 1.920971] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- <6>[ 1.921168] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2 dev_id: 0x9034
- <6>[ 1.921179] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- <6>[ 1.921376] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3 dev_id: 0x9036
- <6>[ 1.921386] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- <6>[ 1.921414] c3 1 msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
- <6>[ 1.921606] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
- <6>[ 1.921617] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- <6>[ 1.921816] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1 dev_id: 0x9033
- <6>[ 1.921827] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-1: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- <6>[ 1.922022] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2 dev_id: 0x9035
- <6>[ 1.922033] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-2: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- <6>[ 1.922228] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3 dev_id: 0x9037
- <6>[ 1.922238] c3 1 msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-3: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
- <6>[ 1.935644] c3 1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
- <6>[ 1.935677] c3 1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
- <6>[ 1.935703] c3 1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
- <6>[ 1.935728] c3 1 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
- <3>[ 1.937752] c3 1 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
- <6>[ 1.940112] c3 1 GACT probability NOT on
- <6>[ 1.940136] c3 1 Mirror/redirect action on
- <6>[ 1.940160] c3 1 u32 classifier
- <6>[ 1.940165] c3 1 Actions configured
- <6>[ 1.940193] c3 1 Netfilter messages via NETLINK v0.30.
- <6>[ 1.940235] c3 1 nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- <6>[ 1.940450] c3 1 ctnetlink v0.93: registering with nfnetlink.
- <6>[ 1.940877] c3 1 xt_time: kernel timezone is -0000
- <6>[ 1.941057] c3 1 ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 1.941165] c3 1 arp_tables: (C) 2002 David S. Miller
- <6>[ 1.941201] c3 1 TCP: cubic registered
- <6>[ 1.941211] c3 1 Initializing XFRM netlink socket
- <6>[ 1.941495] c3 1 NET: Registered protocol family 10
- <6>[ 1.942117] c3 1 mip6: Mobile IPv6
- <6>[ 1.942137] c3 1 ip6_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 1.942242] c3 1 sit: IPv6 over IPv4 tunneling driver
- <6>[ 1.942518] c3 1 NET: Registered protocol family 17
- <6>[ 1.942543] c3 1 NET: Registered protocol family 15
- <6>[ 1.942588] c3 1 bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
- <6>[ 1.942597] c3 1 Ebtables v2.0 registered
- <6>[ 1.942783] c2 1 Bluetooth: ffffffc0f9647c98
- <6>[ 1.942803] c2 1 Bluetooth: ffffffc0f9647cd8Bluetooth: ffffffc0f9647cb8
- <6>[ 1.942828] c2 1 Bluetooth: ffffffc0f9647cb8Bluetooth: ffffffc0f9647c88
- <6>[ 1.942845] c2 1 Bluetooth: ffffffc0f9647d08Bluetooth: ffffffc0f9647cd8
- <6>[ 1.942879] c2 1 l2tp_core: L2TP core driver, V2.0
- <6>[ 1.942894] c2 1 l2tp_ppp: PPPoL2TP kernel driver, V2.0
- <6>[ 1.942903] c2 1 l2tp_ip: L2TP IP encapsulation support (L2TPv3)
- <6>[ 1.942921] c2 1 l2tp_netlink: L2TP netlink interface
- <6>[ 1.942946] c2 1 l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
- <6>[ 1.942963] c2 1 l2tp_debugfs: L2TP debugfs support
- <6>[ 1.942972] c2 1 l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
- <6>[ 1.944043] c2 1 NET: Registered protocol family 27
- <6>[ 1.944162] c2 1 [NET]htc_net_debug_init start.
- <6>[ 1.948007] c3 376 subsys-pil-tz 9300000.qcom,lpass: for adsp segments only will be dumped.
- <6>[ 1.948538] c3 376 pil_tz_driver_probe: CONFIG_HTC_FEATURES_SSR_LPASS_ENABLE, RESET_SUBSYS_COUPLED.
- <6>[ 1.948926] c3 376 subsys-pil-tz 1c00000.qcom,ssc: for slpi segments only will be dumped.
- <3>[ 1.949895] c0 47 smd_channel_probe_now: allocation table not initialized
- <4>[ 1.950010] c3 376 pil-q6v5-mss 2080000.qcom,mss: Failed to find the pas_id.
- <6>[ 1.950672] c3 376 pil-q6v5-mss 2080000.qcom,mss: for modem segments only will be dumped.
- <6>[ 1.953283] c3 376 sps:BAM 0x0000000006b04000 is registered.
- <3>[ 1.955226] c3 376 qpnp-smbcharger qpnp-smbcharger-16: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
- <6>[ 1.955252] c3 376 SMBCHG: smbchg_check_chg_version: PMI8996 version:1
- <6>[ 1.955377] c3 376 smbcharger_charger_otg: no parameters
- <6>[ 1.955485] c3 376 smbcharger_external_otg: no parameters
- <6>[ 1.955510] c3 376 smbcharger_external_otg: supplied by pmi8994_boost_5v
- <6>[ 1.955603] c3 376 HVDCP_ENABLE: HVDCP_PMIC_VOTER,0 voting on of val=1
- <6>[ 1.955610] c3 376 HVDCP_ENABLE: effective vote is now 1 voted by HVDCP_PMIC_VOTER,0
- <3>[ 1.955616] c3 376 SMBCHG: smbchg_hvdcp_enable_cb: smbchg_hvdcp_enable_cb enable 1
- <6>[ 1.956155] c3 376 BATTCHG_SUSPEND: BATTCHG_UNKNOWN_BATTERY_EN_VOTER,0 voting on of val=1
- <6>[ 1.956161] c3 376 BATTCHG_SUSPEND: effective vote is now 1 voted by BATTCHG_UNKNOWN_BATTERY_EN_VOTER,0
- <6>[ 1.956192] c3 376 USB_SUSPEND: FAKE_BATTERY_EN_VOTER,0 voting off of val=0
- <6>[ 1.956197] c3 376 USB_SUSPEND: effective vote is now 0 voted by FAKE_BATTERY_EN_VOTER,0
- <6>[ 1.956738] c2 376 USB_SUSPEND: USER_EN_VOTER,1 Ignoring similar vote off of val=0
- <6>[ 1.956746] c2 376 DC_SUSPEND: USER_EN_VOTER,0 voting off of val=0
- <6>[ 1.956752] c2 376 DC_SUSPEND: effective vote is now 0 voted by USER_EN_VOTER,0
- <6>[ 1.956840] c2 376 DCIN_ICL: PSY_ICL_VOTER,0 voting on of val=1500
- <6>[ 1.956846] c2 376 DCIN_ICL: effective vote is now 1500 voted by PSY_ICL_VOTER,0
- <6>[ 1.956996] c2 376 BATT_FCC: BATT_TYPE_FCC_VOTER,0 voting on of val=3000
- <6>[ 1.957002] c2 376 BATT_FCC: effective vote is now 3000 voted by BATT_TYPE_FCC_VOTER,0
- <6>[ 1.957093] c2 376 HWAICL_ENABLE_INDIRECT: DEFAULT_CONFIG_HW_AICL_VOTER,0 voting on of val=1
- <6>[ 1.957099] c2 376 HWAICL_ENABLE_INDIRECT: effective vote is now 1 voted by DEFAULT_CONFIG_HW_AICL_VOTER,0
- <6>[ 1.957105] c2 376 HWAICL_DISABLE: HW_AICL_RERUN_ENABLE_INDIRECT_VOTER,0 voting off of val=0
- <6>[ 1.957110] c2 376 HWAICL_DISABLE: effective vote is now 0 voted by HW_AICL_RERUN_ENABLE_INDIRECT_VOTER,0
- <3>[ 1.957901] c2 17 SMBCHG: smbchg_clean_tcc_WA_work: called before init
- <6>[ 1.980639] c2 376 USB_ICL: PSY_ICL_VOTER,0 voting on of val=100
- <6>[ 1.980648] c2 376 USB_ICL: effective vote is now 100 voted by PSY_ICL_VOTER,0
- <6>[ 1.980656] c2 376 USB_SUSPEND: USB_EN_VOTER,2 Ignoring similar vote off of val=0
- <6>[ 1.980751] c2 376 [USB] charger type: USB_SDP_CHARGER
- <6>[ 1.980854] c2 376 [USB] check_vbus_in : 0 -> 1
- <6>[ 1.980897] c3 374 [USB] dwc3_msm_otg_sm_work: undefined state
- <6>[ 1.981314] c2 396 BATTCHG_SUSPEND: BATTCHG_UNKNOWN_BATTERY_EN_VOTER,0 Ignoring similar vote on of val=1
- <6>[ 1.981322] c2 396 USB_SUSPEND: FAKE_BATTERY_EN_VOTER,0 Ignoring similar vote off of val=0
- <6>[ 1.981388] c2 396 USB_ICL: PSY_ICL_VOTER,0 voting on of val=0
- <6>[ 1.981393] c2 396 USB_ICL: effective vote is now 0 voted by PSY_ICL_VOTER,0
- <6>[ 1.981399] c2 396 USB_SUSPEND: USB_EN_VOTER,2 voting on of val=1
- <6>[ 1.981404] c2 396 USB_SUSPEND: effective vote is now 1 voted by USB_EN_VOTER,2
- <6>[ 1.981653] c2 396 BATTCHG_SUSPEND: BATTCHG_UNKNOWN_BATTERY_EN_VOTER,0 Ignoring similar vote on of val=1
- <6>[ 1.981660] c2 396 USB_SUSPEND: FAKE_BATTERY_EN_VOTER,0 Ignoring similar vote off of val=0
- <6>[ 1.981688] c2 396 USB_ICL: PSY_ICL_VOTER,0 Ignoring similar vote on of val=0
- <3>[ 1.984503] c2 376 qpnp-smbcharger qpnp-smbcharger-16: node /soc/qcom,spmi@400f000/qcom,pmi8994@2/qcom,qpnp-smbcharger IO resource absent!
- <6>[ 1.984512] c2 376 [USB] check_vbus_in : 1 -> 1
- <4>[ 1.984534] c2 376 smbchg_debug_mask=0x6
- <6>[ 1.988384] c2 376 qpnp-smbcharger qpnp-smbcharger-16: SMBCHG successfully probe Charger version=SCHG Revision DIG:2.0 ANA:2.1 batt=1 dc=0 usb=1
- <6>[ 1.988390] c2 376 [BATT] Probe process: (0, 2)
- <6>[ 1.988455] c2 376 SMBCHG: handle_usb_insertion: triggered
- <6>[ 1.988485] c2 376 SMBCHG: handle_usb_insertion: inserted type = 4 (SDP)
- <6>[ 1.988538] c2 376 SMBCHG: smbchg_change_usb_supply_type: Type 4: setting mA = 100
- <6>[ 1.988545] c2 376 USB_ICL: PSY_ICL_VOTER,0 voting on of val=100
- <6>[ 1.988551] c2 376 USB_ICL: effective vote is now 100 voted by PSY_ICL_VOTER,0
- <6>[ 1.988557] c2 376 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 100
- <6>[ 1.988562] c2 376 USB_SUSPEND: USB_EN_VOTER,2 voting off of val=0
- <6>[ 1.988568] c2 376 USB_SUSPEND: effective vote is now 0 voted by USB_EN_VOTER,2
- <6>[ 1.988682] c2 376 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 100 mA
- <6>[ 1.988699] c3 417 SMBCHG: power_ok_handler: triggered: 0x01. prev_power_ok(-1) power_ok(1)
- <6>[ 1.988712] c2 376 SMBCHG: get_parallel_psy: parallel charger not found
- <6>[ 1.988717] c2 376 [USB] charger type: USB_SDP_CHARGER
- <6>[ 1.988818] c2 376 [USB] check_vbus_in : 1 -> 1
- <6>[ 1.988837] c2 376 SMBCHG: get_parallel_psy: parallel charger not found
- <6>[ 1.988843] c2 376 SMBCHG: pmi8994_boot_update_usb_status: Update usb type!
- <6>[ 1.989710] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
- <6>[ 1.989739] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
- <6>[ 1.989765] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
- <6>[ 1.989790] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
- <3>[ 1.991806] c2 376 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
- <6>[ 1.992191] c2 396 BATTCHG_SUSPEND: BATTCHG_UNKNOWN_BATTERY_EN_VOTER,0 Ignoring similar vote on of val=1
- <6>[ 1.992200] c2 396 USB_SUSPEND: FAKE_BATTERY_EN_VOTER,0 Ignoring similar vote off of val=0
- <6>[ 1.992237] c2 396 USB_ICL: PSY_ICL_VOTER,0 voting on of val=0
- <6>[ 1.992243] c2 396 USB_ICL: effective vote is now 0 voted by PSY_ICL_VOTER,0
- <6>[ 1.992250] c2 396 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0
- <6>[ 1.992256] c2 396 USB_SUSPEND: USB_EN_VOTER,2 voting on of val=1
- <6>[ 1.992261] c2 396 USB_SUSPEND: effective vote is now 1 voted by USB_EN_VOTER,2
- <6>[ 1.992294] c2 396 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 0 mA
- <6>[ 1.992316] c2 396 SMBCHG: get_parallel_psy: parallel charger not found
- <6>[ 1.992413] c0 417 SMBCHG: power_ok_handler: triggered: 0x00.
- <5>[ 1.993058] c3 1 Loading compiled-in X.509 certificates
- <5>[ 1.993913] c3 1 Loaded X.509 cert 'Magrathea: Glacier signing key: 89559970e2cc3f42952c626902f39989717e35a9'
- <6>[ 1.993938] c3 1 registered taskstats version 1
- <5>[ 1.997402] c2 1 Key type encrypted registered
- <3>[ 1.999948] c0 1 scm_call failed: func id 0x42001601, ret: -1, syscall returns: 0x0, 0x0, 0x0
- <6>[ 2.001161] c0 1 fastrpc soc:qcom,msm-adsprpc-mem: for adsp_rh segments only will be dumped.
- <6>[ 2.002895] c0 1 adsprpc: channel link type: 0
- <4>[ 2.004245] c1 374 [USB] USB3_QSERDES_TX_EMP_POST1_LVL = f
- <4>[ 2.004271] c1 374 [USB] USB3_QSERDES_TX_DRV_LVL = 1
- <6>[ 2.006829] c1 378 [USB] dwc3_msm_otg_sm_work: b_peripheral state
- <6>[ 2.006881] c1 378 [USB] dwc3_msm_otg_sm_work: b_peripheral state
- <3>[ 2.015507] c2 376 Unable to find log_buf by kallsyms!
- <6>[ 2.020974] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
- <6>[ 2.021007] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
- <6>[ 2.021040] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
- <6>[ 2.021068] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
- <3>[ 2.023292] c2 376 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
- <6>[ 2.025379] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
- <6>[ 2.025416] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
- <6>[ 2.025447] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
- <6>[ 2.025478] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
- <6>[ 2.025938] c1 1 RNDIS_IPA module is loaded.
- <6>[ 2.025998] c1 374 [WLAN] dhd_module_init_async in
- <6>[ 2.026407] c1 374 [WLAN] found wifi platform device bcmdhd_wlan
- <6>[ 2.027337] c1 374 [WLAN] Power-up adapter 'DHD generic adapter'
- <6>[ 2.027353] c1 374 [WLAN] wifi_platform_set_power = 1
- <4>[ 2.027385] c1 374 [WLAN] wlan-en-gpio gpio is now enabled, retry 0 time
- <3>[ 2.027805] c3 376 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
- <6>[ 2.027855] c0 1 [USB] android_probe: android_probe : init string : char_bridge:modem,tty,tty:autobot,tty:serial,tty:autobot,tty:acm
- <6>[ 2.027866] c0 1 [USB] android_probe: android_probe : diag client string : diag
- <6>[ 2.027874] c0 1 [USB] android_probe: android_probe : rmnet transports string : qti,bam2bam_ipa
- <6>[ 2.028363] c0 1 file system registered
- <6>[ 2.028416] c0 1 [USB] mbim_init: initialize 1 instances
- <6>[ 2.028473] c0 1 [USB] mbim_init: Initialized 1 ports
- <6>[ 2.029388] c0 1 [USB] serial_function_init: serial_function_init: serial_init_string char_bridge:modem,tty,tty:autobot,tty:serial,tty:autobot,tty:acm
- <6>[ 2.030765] c0 1 [USB] rndis_qc_init: initialize rndis QC instance
- <6>[ 2.030959] c0 1 Number of LUNs=8
- <6>[ 2.030972] c0 1 Mass Storage Function, version: 2009/09/11
- <6>[ 2.030980] c0 1 LUN: removable file: (no medium)
- <6>[ 2.031038] c0 1 Number of LUNs=1
- <6>[ 2.031082] c0 1 LUN: removable file: (no medium)
- <6>[ 2.031088] c0 1 Number of LUNs=1
- <6>[ 2.031314] c0 1 android_usb gadget: android_usb ready
- <6>[ 2.031374] c0 1 [USB] android_probe: probe complete
- <6>[ 2.032267] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
- <6>[ 2.032301] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
- <6>[ 2.032331] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
- <6>[ 2.032360] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
- <3>[ 2.034810] c3 376 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
- <6>[ 2.035729] c2 1 [KEY] gpio_keys_setup_key, error=-524, debounce(20, 20)
- <6>[ 2.035775] c0 0 [KEY] gpio_keys_gpio_isr, irq=354, gpio=40
- <6>[ 2.035819] c2 1 [KEY] keycode = 116, gpio = 40, irq = 354
- <6>[ 2.035833] c2 1 [KEY] gpio_keys_setup_key, error=-524, debounce(20, 20)
- <6>[ 2.035872] c0 0 [KEY] gpio_keys_gpio_isr, irq=440, gpio=126
- <6>[ 2.035884] c2 1 [KEY] keycode = 115, gpio = 126, irq = 440
- <6>[ 2.035896] c2 1 [KEY] gpio_keys_setup_key, error=-524, debounce(20, 20)
- <6>[ 2.035931] c0 0 [KEY] gpio_keys_gpio_isr, irq=435, gpio=121
- <6>[ 2.036063] c2 1 [KEY] keycode = 114, gpio = 121, irq = 435
- <6>[ 2.036063] c2 1 input: gpio-keys as /devices/soc/soc:gpio_keys/input/input6
- <6>[ 2.037006] c2 1 [TP]:synaptics_rmi4_i2c_probe
- <6>[ 2.037017] c2 1 [TP]:parse_dt
- <6>[ 2.037065] c2 1 [TP]:parse_dt: irq_gpio = 125
- <6>[ 2.037075] c2 1 [TP]:parse_dt: power_gpio = -1
- <6>[ 2.037107] c2 1 [TP]:parse_dt: reset_gpio = 89
- <6>[ 2.037136] c2 1 [TP]:parse_dt: switch_gpio = 84
- <6>[ 2.037151] c2 1 [TP]: parse_config
- <6>[ 2.037523] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
- <6>[ 2.037555] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
- <6>[ 2.037585] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
- <6>[ 2.037614] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
- <6>[ 2.038085] c2 1 [TP]: synaptics_rmi4_probe
- <3>[ 2.039976] c3 376 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
- <6>[ 2.041083] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
- <6>[ 2.041115] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
- <6>[ 2.041144] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
- <6>[ 2.041171] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
- <3>[ 2.043329] c3 376 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
- <6>[ 2.067175] c0 1 [TP]:check_chip_exist: Synaptics chip exist
- <6>[ 2.070364] c0 1 [TP]:synaptics_rmi4_f12_init: Function 12 max x = 2160 max y = 3840 max z = 255 Rx: 17 Tx: 30
- <6>[ 2.070373] c0 1 [TP]:synaptics_rmi4_f12_init: Display resolution: 1440x2560
- <6>[ 2.073384] c2 396 [KEY] gpio_keys_gpio_report_event: key 1-74, (40) changed to 0
- <6>[ 2.073400] c2 396 [KEY] gpio_keys_gpio_report_event: key 1-73, (126) changed to 0
- <6>[ 2.073411] c2 396 [KEY] gpio_keys_gpio_report_event: key 1-72, (121) changed to 0
- <6>[ 2.079789] c0 1 [TP]:synaptics_rmi4_query_device: chip_id:3708, firmware_id:2235544
- <6>[ 2.080778] c0 1 [TP]:synaptics_rmi4_query_device: config_version: 504d450059464f00534841525000010000000000000000000000000000000000
- <6>[ 2.081304] c0 1 input: synaptics_dsx as /devices/soc/757a000.i2c/i2c-6/6-0020/input/input7
- <6>[ 2.081377] c0 1 [TP]:synaptics_rmi4_probe cover_setting_size = 6
- <6>[ 2.081386] c0 1 [TP]:synaptics_rmi4_set_status: mode 0 (normal)
- <6>[ 2.082356] c0 1 [TP]:synaptics_rmi4_probe glove mode default off
- <6>[ 2.082540] c0 1 [TP]:synaptics_rmi4_probe: enable irq done
- <6>[ 2.082703] c1 1 [TP]: synaptics_rmi4_probe: Done
- <6>[ 2.082761] c1 1 [TP]:rmi4_fw_update_module_init: recovery mode
- <6>[ 2.082830] c1 1 qcom,qpnp-rtc qpnp-rtc-8: setting system clock to 1971-01-11 21:38:40 UTC (32477920)
- <6>[ 2.084959] c0 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
- <6>[ 2.085015] c0 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
- <6>[ 2.085057] c0 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
- <6>[ 2.085096] c0 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
- <3>[ 2.087799] c0 376 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
- <6>[ 2.088785] c0 1 [K] Success to create htc_pm_monitor_wq (0xffffffc0f2bba000).
- <4>[ 2.089212] c0 1 [K][KTOP] Create HTC private workqueue(0xffffffc076b3b400)...
- <4>[ 2.089225] c0 1 [K][KTOP] Success to create htc_kernel_top_monitor_wq (0xffffffc076b3b400).
- <6>[ 2.089858] c1 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
- <6>[ 2.089914] c1 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
- <6>[ 2.089960] c1 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
- <6>[ 2.090001] c1 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
- <3>[ 2.092980] c1 376 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
- <6>[ 2.094612] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
- <6>[ 2.094650] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
- <6>[ 2.094680] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
- <6>[ 2.094708] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
- <3>[ 2.097091] c3 376 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
- <6>[ 2.098785] c2 1 lmh_lite:lmh_parse_sensor Registering sensor:[DLMt_APC1]
- <6>[ 2.099069] c3 1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp00]
- <6>[ 2.099249] c3 1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp01]
- <6>[ 2.099422] c3 1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp10]
- <6>[ 2.099593] c3 1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_cp11]
- <6>[ 2.099761] c3 1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_m4m0]
- <6>[ 2.099932] c3 1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l21-]
- <6>[ 2.100143] c3 1 lmh_lite:lmh_parse_sensor Registering sensor:[LLM_l20-]
- <6>[ 2.101848] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
- <6>[ 2.101886] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
- <6>[ 2.101916] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
- <6>[ 2.101945] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
- <3>[ 2.105395] c2 376 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
- <3>[ 2.105591] c3 1 parse_cpu_levels: idx 1 545
- <3>[ 2.105607] c3 1 parse_cpu_levels: idx 2 6022
- <3>[ 2.105619] c3 1 parse_cpu_levels: idx 2 11499
- <3>[ 2.105793] c3 1 parse_cpu_levels: idx 1 545
- <3>[ 2.105805] c3 1 parse_cpu_levels: idx 2 6022
- <3>[ 2.105816] c3 1 parse_cpu_levels: idx 2 11499
- <6>[ 2.108425] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
- <6>[ 2.108497] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
- <6>[ 2.108561] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
- <6>[ 2.108622] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
- <3>[ 2.113623] c2 376 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
- <6>[ 2.114370] c3 1 [FLT] qpnp_flash_led_probe: ++
- <6>[ 2.114652] c3 1 [FLT] flash_strobe = 22
- <6>[ 2.114666] c3 1 [FLT] backlight_callback_register: ++
- <3>[ 2.114695] c3 1 qcom,qpnp-flash-led qpnp-flash-led-28: Unable to acquire pinctrl
- <6>[ 2.115809] c2 1 [FLT] qpnp_flash_led_probe: attr name strobe
- <6>[ 2.115832] c2 1 [FLT] qpnp_flash_led_probe: attr name reg_dump
- <6>[ 2.115860] c2 1 [FLT] qpnp_flash_led_probe: attr name enable_current_derate
- <6>[ 2.115878] c2 1 [FLT] qpnp_flash_led_probe: attr name max_allowed_current
- <6>[ 2.115894] c2 1 [FLT] qpnp_flash_led_probe: attr name enable_die_temp_current_derate
- <6>[ 2.116015] c2 1 [FLT] qpnp_flash_led_probe: attr name strobe
- <6>[ 2.116033] c2 1 [FLT] qpnp_flash_led_probe: attr name reg_dump
- <6>[ 2.116049] c2 1 [FLT] qpnp_flash_led_probe: attr name enable_current_derate
- <6>[ 2.116065] c2 1 [FLT] qpnp_flash_led_probe: attr name max_allowed_current
- <6>[ 2.116081] c2 1 [FLT] qpnp_flash_led_probe: attr name enable_die_temp_current_derate
- <6>[ 2.116199] c2 1 [FLT] qpnp_flash_led_probe: attr name strobe
- <6>[ 2.116216] c2 1 [FLT] qpnp_flash_led_probe: attr name reg_dump
- <6>[ 2.116231] c2 1 [FLT] qpnp_flash_led_probe: attr name enable_current_derate
- <6>[ 2.116246] c2 1 [FLT] qpnp_flash_led_probe: attr name max_allowed_current
- <6>[ 2.116262] c2 1 [FLT] qpnp_flash_led_probe: attr name enable_die_temp_current_derate
- <6>[ 2.116374] c2 1 [FLT] qpnp_flash_led_probe: attr name strobe
- <6>[ 2.116390] c2 1 [FLT] qpnp_flash_led_probe: attr name reg_dump
- <6>[ 2.116406] c2 1 [FLT] qpnp_flash_led_probe: attr name enable_current_derate
- <6>[ 2.116421] c2 1 [FLT] qpnp_flash_led_probe: attr name max_allowed_current
- <6>[ 2.116436] c2 1 [FLT] qpnp_flash_led_probe: attr name enable_die_temp_current_derate
- <6>[ 2.116765] c2 1 [FLT] qpnp_flash_led_probe: attr name strobe
- <6>[ 2.116783] c2 1 [FLT] qpnp_flash_led_probe: attr name reg_dump
- <6>[ 2.116799] c2 1 [FLT] qpnp_flash_led_probe: attr name flash
- <6>[ 2.116814] c2 1 [FLT] qpnp_flash_led_probe: attr name torch
- <6>[ 2.116829] c2 1 [FLT] qpnp_flash_led_probe: attr name enable_current_derate
- <6>[ 2.116845] c2 1 [FLT] qpnp_flash_led_probe: attr name max_allowed_current
- <6>[ 2.116860] c2 1 [FLT] qpnp_flash_led_probe: attr name enable_die_temp_current_derate
- <6>[ 2.117078] c2 1 [FLT] qpnp_flash_led_probe: attr name strobe
- <6>[ 2.117095] c2 1 [FLT] qpnp_flash_led_probe: attr name reg_dump
- <6>[ 2.117111] c2 1 [FLT] qpnp_flash_led_probe: attr name enable_current_derate
- <6>[ 2.117129] c2 1 [FLT] qpnp_flash_led_probe: attr name max_allowed_current
- <6>[ 2.117145] c2 1 [FLT] qpnp_flash_led_probe: attr name enable_die_temp_current_derate
- <6>[ 2.117195] c2 1 [FLT] qpnp_flash_led_probe: --
- <6>[ 2.117982] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
- <6>[ 2.118051] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
- <6>[ 2.118112] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
- <6>[ 2.118174] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
- <6>[ 2.119523] c1 54 mmc1: au : 8192 KB
- <6>[ 2.119539] c1 54 mmc1: speed class type is CLASS 10
- <3>[ 2.123051] c3 376 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
- <6>[ 2.124516] c2 1 rmnet_ipa started initialization
- <6>[ 2.124530] c2 1 IPA SSR support = True
- <6>[ 2.124536] c2 1 IPA ipa-loaduC = True
- <6>[ 2.124541] c2 1 IPA SG support = True
- <6>[ 2.124975] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
- <6>[ 2.125010] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
- <6>[ 2.125037] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
- <6>[ 2.125062] c3 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
- <3>[ 2.127458] c2 376 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
- <6>[ 2.127563] c1 54 Set SD SDR104 state return : 0
- <3>[ 2.128744] c3 1 ipa ipa_sps_irq_control_all:942 EP (5) not allocated.
- <3>[ 2.128755] c3 1 ipa ipa2_uc_state_check:301 uC is not loaded
- <6>[ 2.129565] c3 1 rmnet_ipa completed initialization
- <6>[ 2.130863] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
- <6>[ 2.130896] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
- <6>[ 2.130923] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
- <6>[ 2.130948] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
- <6>[ 2.131255] c1 54 mmc1: new ultra high speed SDR104 SDXC card at address aaaa
- <6>[ 2.131588] c1 54 sdhci_msm_pm_qos_cpu_init (): voted for group #0 (mask=0x3) latency=70 (0xffffffc0f2d7cd00)
- <6>[ 2.131604] c1 54 sdhci_msm_pm_qos_cpu_init (): voted for group #1 (mask=0xc) latency=70 (0xffffffc0f2d7cd08)
- <6>[ 2.131745] c1 54 mmcblk1: mmc1:aaaa AGGCF 119 GiB
- <3>[ 2.133008] c2 376 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
- <6>[ 2.136233] c3 1 qcom,cc-debug-8996 362000.qcom,cc-debug: Registered debug mux.
- <6>[ 2.137606] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
- <6>[ 2.137640] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
- <6>[ 2.137667] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
- <6>[ 2.137693] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
- <3>[ 2.139769] c2 376 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
- <6>[ 2.139953] c3 1 apc0_pwrcl_mem_acc_corner: disabling
- <6>[ 2.139963] c3 1 apc1_perfcl_mem_acc_corner: disabling
- <6>[ 2.139969] c3 1 apcc_l3_mem_acc_corner: disabling
- <6>[ 2.139976] c3 1 gfx_mem_acc_corner: disabling
- <6>[ 2.139981] c3 1 kryo0-retention: disabling
- <6>[ 2.139989] c3 1 kryo1-retention: disabling
- <6>[ 2.140082] c3 1 gdsc_mmagic_bimc: disabling
- <6>[ 2.140173] c3 1 regulator_proxy_consumer_remove_all: removing regulator proxy consumer requests
- <3>[ 2.140404] c0 47 smd_channel_probe_now: allocation table not initialized
- <4>[ 2.140407] c3 1 ------------[ cut here ]------------
- <4>[ 2.140421] c3 1 WARNING: CPU: 3 PID: 1 at ../drivers/regulator/core.c:2017 _regulator_disable+0x38/0x110()
- <4>[ 2.140427] c3 1 unbalanced disables for pm8994_l14
- <4>[ 2.140432] c3 1 Modules linked in:
- <4>[ 2.140442] c3 1 CPU: 3 PID: 1 Comm: swapper/0 Tainted: G W 3.18.63-BeyondStockᵀᴹ-Recovery-pme-Oreo-gad83436-dirty #2
- <4>[ 2.140448] c3 1 Hardware name: HTC Corporation. MSM8996v3 PME PVT (DT)
- <0>[ 2.140453] c3 1 Call trace:
- <4>[ 2.140462] c3 1 [<ffffffc000089ec0>] dump_backtrace+0x0/0x158
- <4>[ 2.140468] c3 1 [<ffffffc00008a02c>] show_stack+0x14/0x1c
- <4>[ 2.140476] c3 1 [<ffffffc000f447fc>] dump_stack+0x84/0xa8
- <4>[ 2.140483] c3 1 [<ffffffc0000a4fc4>] warn_slowpath_common+0x8c/0xb4
- <4>[ 2.140489] c3 1 [<ffffffc0000a5054>] warn_slowpath_fmt+0x68/0x88
- <4>[ 2.140495] c3 1 [<ffffffc000551778>] _regulator_disable+0x38/0x110
- <4>[ 2.140500] c3 1 [<ffffffc00055188c>] regulator_disable+0x3c/0x7c
- <4>[ 2.140507] c3 1 [<ffffffc0005537d4>] regulator_proxy_consumer_remove+0x24/0x108
- <4>[ 2.140513] c3 1 [<ffffffc0015cd0a0>] regulator_proxy_consumer_remove_all+0x70/0x98
- <4>[ 2.140519] c3 1 [<ffffffc000082af0>] do_one_initcall+0x1c4/0x1e0
- <4>[ 2.140526] c3 1 [<ffffffc001596c80>] kernel_init_freeable+0x1c0/0x278
- <4>[ 2.140534] c3 1 [<ffffffc000f3d59c>] kernel_init+0x10/0xe0
- <4>[ 2.140539] c3 1 ---[ end trace ecd540a81f6bd54a ]---
- <3>[ 2.140544] c3 1 regulator_proxy_consumer_remove: regulator_disable failed, rc=-5
- <6>[ 2.140710] c3 1 clock_late_init: Removing enables held for handed-off clocks
- <6>[ 2.141639] c1 54 mmcblk1: p1 p2
- <6>[ 2.143463] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
- <6>[ 2.143504] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
- <6>[ 2.143532] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
- <6>[ 2.143557] c2 376 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
- <6>[ 2.144297] c3 1 ALSA device list:
- <6>[ 2.144304] c3 1 No soundcards found.
- <3>[ 2.144367] c3 1 Warning: unable to open an initial console.
- <3>[ 2.145534] c2 376 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
- <6>[ 2.230361] c0 374 [WLAN] wifi_platform_bus_enumerate device present 1
- <6>[ 2.240301] c0 54 Set SD SDR104 state return : 0
- <6>[ 2.272988] c0 374 PCI host bridge /soc/qcom,pcie@00600000 ranges:
- <6>[ 2.273019] c0 374 No bus range found for /soc/qcom,pcie@00600000, using [bus 00-ff]
- <6>[ 2.273063] c0 374 IO 0x0c200000..0x0c2fffff -> 0x0c200000
- <6>[ 2.273090] c0 374 MEM 0x0c300000..0x0cffffff -> 0x0c300000
- <6>[ 2.283540] c0 374 pci-msm 600000.qcom,pcie: PCI host bridge to bus 0000:00
- <6>[ 2.283568] c0 374 pci_bus 0000:00: root bus resource [bus 00-ff]
- <6>[ 2.283592] c0 374 pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xc200000-0xc2fffff])
- <6>[ 2.283612] c0 374 pci_bus 0000:00: root bus resource [mem 0x0c300000-0x0cffffff]
- <7>[ 2.283774] c0 374 pci 0000:00:00.0: [17cb:0104] type 01 class 0x060400
- <7>[ 2.284063] c0 374 pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x00000fff 64bit]
- <3>[ 2.284209] c0 374 pci 0000:00:00.0: IOMMU is currently not supported for PCI
- <7>[ 2.284446] c0 374 pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
- <3>[ 2.284605] c0 374 pci 0000:00:00.0: of_irq_parse_pci() failed with rc=-19
- <6>[ 2.285240] c0 374 pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
- <7>[ 2.286406] c0 374 pci 0000:01:00.0: [14e4:4415] type 00 class 0x028000
- <7>[ 2.287816] c0 374 pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00007fff 64bit]
- <7>[ 2.288243] c0 374 pci 0000:01:00.0: reg 0x18: [mem 0x00000000-0x003fffff 64bit]
- <3>[ 2.289000] c0 374 pci 0000:01:00.0: IOMMU is currently not supported for PCI
- <7>[ 2.291015] c0 374 pci 0000:01:00.0: supports D1 D2
- <7>[ 2.291030] c0 374 pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- <7>[ 2.292095] c0 374 pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
- <6>[ 2.292411] c0 374 pci 0000:00:00.0: BAR 8: assigned [mem 0x0c400000-0x0c9fffff]
- <6>[ 2.292438] c0 374 pci 0000:00:00.0: BAR 0: assigned [mem 0x0c300000-0x0c300fff 64bit]
- <6>[ 2.292624] c0 374 pci 0000:01:00.0: BAR 2: assigned [mem 0x0c400000-0x0c7fffff 64bit]
- <6>[ 2.292956] c0 374 pci 0000:01:00.0: BAR 0: assigned [mem 0x0c800000-0x0c807fff 64bit]
- <6>[ 2.293331] c0 374 pci 0000:00:00.0: PCI bridge to [bus 01]
- <6>[ 2.293564] c0 374 pci 0000:00:00.0: bridge window [mem 0x0c400000-0x0c9fffff]
- <6>[ 2.294924] c0 374 [WLAN] dhdpcie_chipmatch: WIFI_OTP: OTP is NOT empty
- <6>[ 2.294946] c0 374 [WLAN] PCI_PROBE: bus 1, slot 0,vendor 14E4, device 4415(good PCI location)
- <6>[ 2.294964] c0 374 [WLAN] dhdpcie_init: found adapter info 'DHD generic adapter'
- <3>[ 2.294981] c0 374 [WLAN] htc_wifi_mem_prealloc: request section 3 size 139264
- <4>[ 2.295009] c0 374 [WLAN] alloc static buf at ffffffc031e40000!
- <3>[ 2.295023] c0 374 [WLAN] htc_wifi_mem_prealloc: request section 4 size 0
- <3>[ 2.295043] c0 374 [WLAN] htc_wifi_get_irq_gpio: irq_num 436
- <3>[ 2.295057] c0 374 [WLAN] htc_wifi_get_irq_gpio: flags 414
- <6>[ 2.295071] c0 374 [WLAN] wifi_platform_get_irq_number: got irq 436 flags 414
- <6>[ 2.295265] c0 374 pcieh 0000:01:00.0: enabling device (0000 -> 0002)
- <6>[ 2.298024] c0 374 [WLAN] dhdpcie_bus_attach: bar0_addr 0x0x000000000c800000 bar1_addr 0x0x000000000c400000
- <6>[ 2.301059] c0 374 [WLAN] DHD: dongle ram size is set to 917504(orig 917504) at 0x160000
- <3>[ 2.301078] c0 374 [WLAN] htc_wifi_mem_prealloc: request section 7 size 25024
- <3>[ 2.301095] c0 374 [WLAN] htc_wifi_mem_prealloc: request DHD_INFO size(25024) is bigger than static size(24576).
- <6>[ 2.301111] c0 374 [WLAN] wifi_platform_prealloc: failed to alloc static mem section 7
- <6>[ 2.301134] c0 374 [WLAN] wifi_platform_get_mac_addr
- <6>[ 2.301175] c0 374 [WLAN] htc_wifi_get_mac_addr: 80:7a:bf:3b:XX:XX
- <3>[ 2.301287] c0 374 [WLAN] htc_wifi_mem_prealloc: request section 0 size 1304
- <6>[ 2.301891] c0 374 [WLAN] CFG80211-LOG) wl_setup_wiphy : Registering Vendor80211
- <4>[ 2.302664] c0 374 wl_create_event_handler(): thread:wl_event_handler:1d7 started
- <4>[ 2.303060] c0 374 dhd_attach(): thread:dhd_watchdog_thread:1d8 started
- <4>[ 2.303209] c0 374 dhd_attach(): thread:dhd_rpm_state_thread:1d9 started
- <6>[ 2.303229] c0 374 dhdpcie_interrupt_set_cpucore: set: 0, pcie->irq=35, oobirq=0
- <6>[ 2.303262] c0 374 [WLAN] dhd_deferred_work_init: work queue initialized
- <6>[ 2.303276] c0 374 [WLAN] DHD LOAD BALANCING Enabled
- <6>[ 2.303290] c0 374 [WLAN] dhd_lb_set_default_cpus: set rx napi cpu to core0
- <6>[ 2.303834] c0 374 [WLAN] Dongle Host Driver, version 1.363.77.18 (r620987)
- <6>[ 2.303834] c0 374 Compiled in drivers/net/wireless/bcmdhd on Mar 8 2018 at 16:25:32
- <6>[ 2.304675] c0 374 [WLAN] Register interface [wlan0] MAC: 7f:85:40:c4:57:24
- <6>[ 2.304675] c0 374
- <6>[ 2.304736] c2 471 [WLAN] CFG80211-LOG) wl_event_handler : was terminated
- <4>[ 2.304798] c0 374 wl_destroy_event_handler(): thread:wl_event_handler:1d7 terminated OK
- <6>[ 2.304819] c0 374 [WLAN] dhd_wl_ioctl: returning as busstate=0
- <6>[ 2.304836] c0 374 [WLAN] dhd_bus_devreset: == Power OFF ==
- <6>[ 2.304871] c0 374 [WLAN] dhdpcie_oob_intr_unregister: irq is not registered
- <6>[ 2.304907] c0 374 [WLAN] dhd_clear: Delete sta list before clear
- <6>[ 2.317099] c0 374 [WLAN] dhd_bus_devreset: WLAN OFF Done
- <6>[ 2.317111] c0 374 [WLAN] wifi_platform_set_power = 0
- <4>[ 2.317145] c0 374 [WLAN] wlan-en-gpio gpio is now disabled, retry 0 time
- <6>[ 2.317355] c0 374 [WLAN] dhd_module_init_async out, err=0
- <6>[ 2.317816] c3 1 Freeing unused kernel memory: 616K
- <6>[ 2.317869] c3 1 Freeing alternatives memory: 112K
- <4>[ 2.317884] c3 1 This architecture does not have kernel memory protection.
- <6>[ 2.318884] c0 374 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-dout no 67
- <6>[ 2.318938] c0 374 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-din no 68
- <6>[ 2.318982] c0 374 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-clock no 65
- <6>[ 2.319026] c0 374 [AUD] snd_soc_msm8996: msm8994_init_ftm_btpcm: btpcm gpio ftm-btpcm-sync no 66
- <13>[ 2.319946] c3 1 init: init first stage started!
- <3>[ 2.321608] c0 374 msm8996-asoc-snd soc:sound-9335: ASoC: platform (null) not registered
- <7>[ 2.325333] c3 1 SELinux: 2048 avtab hash slots, 6814 rules.
- <7>[ 2.329382] c3 1 SELinux: 2048 avtab hash slots, 6814 rules.
- <7>[ 2.329415] c3 1 SELinux: 1 users, 2 roles, 668 types, 0 bools, 1 sens, 1024 cats
- <7>[ 2.329433] c3 1 SELinux: 64 classes, 6814 rules
- <6>[ 2.330940] c3 1 SELinux: Class can_socket not defined in policy.
- <6>[ 2.330951] c3 1 SELinux: the above unknown classes and permissions will be denied
- <7>[ 2.330972] c3 1 SELinux: Completing initialization.
- <7>[ 2.330976] c3 1 SELinux: Setting up existing superblocks.
- <7>[ 2.330987] c3 1 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 2.331005] c3 1 SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
- <7>[ 2.331613] c3 1 SELinux: initialized (dev bdev, type bdev), not configured for labeling
- <7>[ 2.331624] c3 1 SELinux: initialized (dev proc, type proc), uses genfs_contexts
- <7>[ 2.331641] c3 1 SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
- <7>[ 2.352543] c3 1 SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
- <7>[ 2.352561] c3 1 SELinux: initialized (dev tracefs, type tracefs), uses genfs_contexts
- <7>[ 2.370426] c3 1 SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
- <7>[ 2.370440] c3 1 SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
- <7>[ 2.370447] c3 1 SELinux: initialized (dev aio, type aio), not configured for labeling
- <7>[ 2.370456] c3 1 SELinux: initialized (dev devpts, type devpts), uses transition SIDs
- <7>[ 2.370472] c3 1 SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
- <7>[ 2.370483] c3 1 SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
- <7>[ 2.370549] c3 1 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 2.370567] c3 1 SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- <5>[ 2.374522] c2 1 audit: type=1403 audit(32477920.790:2): policy loaded auid=4294967295 ses=4294967295
- <13>[ 2.375001] c2 1 init: (Initializing SELinux non-enforcing took 0.05s.)
- <13>[ 2.376731] c2 1 init: init second stage started!
- <13>[ 2.379741] c2 1 init: Running restorecon...
- <6>[ 2.393467] c3 368 [S_HUB] irq_hndl: gpio_mcu_status_level:1
- <6>[ 2.393491] c3 368 [S_HUB] irq_hndl: skip, s_mcu_state:0, gpio_mcu_status_level:1
- <3>[ 2.393503] c1 167 [S_HUB] mcu_state_enter_dload[585]: set mcu to SHUB mode
- <6>[ 2.394857] c1 167 [S_HUB] rst_hub: gpio_rst = 0
- <6>[ 2.406726] c1 167 [S_HUB] rst_hub: gpio_rst = 1
- <11>[ 2.418043] c2 1 init: waitpid failed: No child processes
- <13>[ 2.418392] c2 1 init: (Loading properties from /default.prop took 0.00s.)
- <11>[ 2.418826] c2 1 init: /init.rc: 13: invalid keyword 'setcon'
- <11>[ 2.418927] c2 1 init: /init.rc: 61: invalid keyword 'load_all_props'
- <11>[ 2.419016] c2 1 init: could not import file '/init.recovery.logd.rc' from '/init.rc': No such file or directory
- <13>[ 2.419125] c2 1 init: (Parsing /init.recovery.usb.rc took 0.00s.)
- <13>[ 2.419169] c2 1 init: (Parsing /init.recovery.service.rc took 0.00s.)
- <13>[ 2.419251] c2 1 init: (Parsing /init.recovery.vold_decrypt.keymaster-3-0.rc took 0.00s.)
- <13>[ 2.419295] c2 1 init: (Parsing /init.recovery.vold_decrypt.hwservicemanager.rc took 0.00s.)
- <13>[ 2.419347] c2 1 init: (Parsing /init.recovery.vold_decrypt.qseecomd.rc took 0.00s.)
- <13>[ 2.419361] c2 1 init: (Parsing /init.recovery.vold_decrypt.rc took 0.00s.)
- <13>[ 2.419454] c2 1 init: (Parsing init.recovery.htc_decrypt.rc took 0.00s.)
- <13>[ 2.419468] c2 1 init: (Parsing /init.recovery.htc_pme.rc took 0.00s.)
- <13>[ 2.419480] c2 1 init: (Parsing /init.rc took 0.00s.)
- <5>[ 2.419571] c2 1 audit: type=1400 audit(32477920.833:3): avc: denied { setcheckreqprot } for pid=1 comm="init" scontext=u:r:init:s0 tcontext=u:object_r:kernel:s0 tclass=security permissive=1
- <13>[ 2.419634] c2 1 init: Starting service 'ueventd'...
- <13>[ 2.419923] c2 1 init: Waiting for /dev/.coldboot_done...
- <13>[ 2.421163] c3 475 ueventd: ueventd started!
- <6>[ 2.438650] c2 368 [S_HUB] irq_hndl: gpio_mcu_status_level:0
- <6>[ 2.546959] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:60
- <6>[ 2.546974] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
- <6>[ 2.546980] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:60
- <6>[ 2.546986] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
- <6>[ 2.546991] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:60
- <6>[ 2.546997] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
- <6>[ 2.547002] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:60
- <6>[ 2.547007] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
- <6>[ 2.646993] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:47
- <6>[ 2.647008] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
- <6>[ 2.647014] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:47
- <6>[ 2.647021] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
- <6>[ 2.647027] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:47
- <6>[ 2.647033] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
- <6>[ 2.647039] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:47
- <6>[ 2.647045] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
- <5>[ 2.774013] c3 475 audit: type=1400 audit(32477921.190:4): avc: denied { relabelfrom } for pid=475 comm="ueventd" name="rmi0" dev="tmpfs" ino=1646 scontext=u:r:ueventd:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
- <5>[ 2.774040] c3 475 audit: type=1400 audit(32477921.190:5): avc: denied { relabelto } for pid=475 comm="ueventd" name="rmi0" dev="tmpfs" ino=1646 scontext=u:r:ueventd:s0 tcontext=u:object_r:device:s0 tclass=chr_file permissive=1
- <13>[ 2.786126] c3 475 ueventd: Coldboot took 0.36s.
- <13>[ 2.794420] c0 1 init: Waiting for /dev/.coldboot_done took 0.37s.
- <7>[ 2.798713] c0 1 SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <5>[ 2.799113] c0 1 audit: type=1400 audit(32477921.213:6): avc: denied { sys_module } for pid=1 comm="init" capability=16 scontext=u:r:init:s0 tcontext=u:r:init:s0 tclass=capability permissive=1
- <4>[ 2.799715] c0 1 texfat: disagrees about version of symbol module_layout
- <11>[ 2.799846] c0 1 init: finit_module for "/system/lib/modules/texfat.ko" failed: Exec format error
- <7>[ 2.801045] c3 1 SELinux: initialized (dev pstore, type pstore), uses genfs_contexts
- <7>[ 2.801432] c3 1 SELinux: initialized (dev functionfs, type functionfs), uses genfs_contexts
- <6>[ 2.801508] c3 1 [USB] enable_store: enable_store: soft disconnect : 0
- <3>[ 2.801516] c3 1 [USB] enable_store: android_usb: already disabled
- <6>[ 2.801666] c3 1 [USB] functions_store: functions_store: switch function to adb
- <11>[ 2.801739] c3 1 init: property 'ro.product.model' doesn't exist while expanding '${ro.product.model}'
- <11>[ 2.801750] c3 1 init: write: cannot expand '${ro.product.model}'
- <13>[ 2.801997] c3 1 init: (Loading properties from /system/build.prop took 0.00s.)
- <13>[ 2.802023] c3 1 init: (Loading properties from /vendor/build.prop took 0.00s.)
- <13>[ 2.802047] c3 1 init: (Loading properties from /factory/factory.prop took 0.00s.)
- <11>[ 2.802125] c3 1 init: /recovery not specified in fstab
- <13>[ 2.802158] c3 1 init: (Loading properties from /data/local.prop took 0.00s.)
- <11>[ 2.802182] c3 1 init: Unable to open persistent property directory "/data/property": No such file or directory
- <6>[ 2.818533] c1 1 EXT4-fs (mmcblk0p63): mounted filesystem with ordered data mode. Opts:
- <7>[ 2.818589] c1 1 SELinux: initialized (dev mmcblk0p63, type ext4), uses xattr
- <11>[ 2.821630] c1 1 init: Found bootmid 2PS620000 setting build properties for pme device
- <13>[ 2.822548] c1 1 init: Starting service 'set_permissive'...
- <13>[ 2.823133] c1 1 init: Starting service 'recovery'...
- <13>[ 2.823840] c1 1 init: Starting service 'chargeled'...
- <5>[ 2.823883] c2 481 random: permissive.sh urandom read with 97 bits of entropy available
- <6>[ 2.824818] c1 1 [USB] enable_store: enable_store: soft disconnect : 0
- <13>[ 2.824907] c1 1 init: Starting service 'adbd'...
- <6>[ 2.825696] c1 1 [USB] enable_store: enable_store: soft disconnect : 1
- <14>[ 2.827980] c0 483 [CHRG_LED]: void update_led(int): is RGB LED='1'
- <14>[ 2.828134] c0 483 [CHRG_LED]: void update_led(int): setting charging status '2'
- <6>[ 2.828183] c0 483 [LED] led_multi_color_store , ModeRGB = 1c80000
- <6>[ 2.828200] c0 483 [LED] led_multi_color_store , ModeRGB = 1c80000
- <6>[ 2.828253] c0 374 [LED] led_multicolor_work_func , Mode = 1
- <6>[ 2.828273] c0 374 [LED]qpnp_rgb_set, name:rgb_amber, brightness = 0 status: 0
- <6>[ 2.828385] c0 374 [LED]qpnp_rgb_set, name:rgb_green, brightness = 0 status: 0
- <6>[ 2.828486] c0 374 [LED]qpnp_rgb_set, name:rgb_amber, brightness = 1 status: 0
- <6>[ 2.832713] c1 486 read descriptors
- <6>[ 2.832755] c1 486 read strings
- <5>[ 2.833102] c2 485 audit: type=1400 audit(32477921.246:7): avc: denied { write } for pid=485 comm="setenforce" name="enforce" dev="selinuxfs" ino=4 scontext=u:r:recovery:s0 tcontext=u:object_r:selinuxfs:s0 tclass=file permissive=1
- <13>[ 2.835072] c2 1 init: Service 'set_permissive' (pid 481) exited with status 0
- <6>[ 2.839308] c0 374 [LED]qpnp_rgb_set, name:rgb_green, brightness = 0 status: 0
- <6>[ 2.846971] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:69
- <6>[ 2.846983] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
- <6>[ 2.846989] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:69
- <6>[ 2.846995] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
- <6>[ 2.847001] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:69
- <6>[ 2.847006] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
- <6>[ 2.847011] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:69
- <6>[ 2.847016] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
- <6>[ 2.853130] c3 482 mdss_backlight_trans: mode=1, apply_cali=0, 255 => 4095
- <6>[ 2.853145] c3 482 mdss_fb_set_backlight: defer backlight value 4095
- <11>[ 2.853961] c1 1 init: avc: denied { set } for property=twrp.crash_counter pid=482 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service permissive=1
- <6>[ 2.855173] c3 482 mdss_backlight_trans: mode=1, apply_cali=0, 255 => 4095
- <6>[ 2.855185] c3 482 mdss_fb_set_backlight: defer backlight value 4095
- <6>[ 2.855940] c3 482 mdss_fb_set_backlight: defer backlight value 4095
- <6>[ 2.866667] c1 38 [cap] cypress_start_up_update_func: No Firmware file
- <6>[ 2.872808] c3 482 [cap] fb_notifier_callback, event = 16
- <6>[ 2.872810] c3 482 [cap] cypress_cap_early_suspend
- <6>[ 2.872817] c3 482 [cap] cypress_set_sleep_mode: 1
- <6>[ 2.873331] c2 482 [cap] cypress_cap_pinctrl_select: set to 0
- <6>[ 2.873422] c2 482 [TP]:fb_notifier_callback, event 16
- <6>[ 2.873423] c2 482 [TP]:fb_notifier_callback: ignore first boot:2
- <6>[ 2.873506] c3 482 mdss_fb_set_backlight: defer backlight value 0
- <6>[ 2.873552] c3 482 fb_event_callback: fb0, event=9, blank=4
- <6>[ 2.873554] c3 482 [cap] fb_notifier_callback, event = 9
- <6>[ 2.873558] c3 482 [BATT] fb_notifier_callback-> display is Off
- <6>[ 2.873558] c3 482 [TP]:fb_notifier_callback, event 9
- <6>[ 2.873560] c3 482 [TP]:fb_notifier_callback: ignore first boot:1
- <6>[ 2.873613] c3 482 [cap] fb_notifier_callback, event = 16
- <6>[ 2.873614] c3 482 [TP]:fb_notifier_callback, event 16
- <6>[ 2.873617] c3 482 [S_HUB] [TP] tp_st: status = 0
- <6>[ 2.938254] c0 0 [USB] suspend
- <6>[ 2.949766] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:46
- <6>[ 2.949772] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
- <6>[ 2.949777] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:46
- <6>[ 2.949781] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
- <6>[ 2.949786] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:46
- <6>[ 2.949790] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
- <6>[ 2.949795] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:46
- <6>[ 2.949799] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
- <6>[ 3.230182] c3 55 BATTCHG_SUSPEND: BATTCHG_USER_EN_VOTER,1 voting on of val=1
- <6>[ 3.259781] c0 0 [USB] reset
- <6>[ 3.270840] c0 0 [USB] HIGHSPEED
- <4>[ 3.339752] c0 0 [USB] first_dt_w_length = 64
- <6>[ 3.339953] c0 47 [USB] android_work : sw_suspended 0 suspended 0 config 0,connect2pc 0
- <6>[ 3.339954] c0 47 [USB] android_work : sw_connected 0 connected 1 last_uevent 0
- <6>[ 3.340193] c0 47 [USB] android_work: android_work: sent uevent USB_STATE=CONNECTED
- <6>[ 3.340241] c0 47 [USB] android_work: set usb_connect2pc = 1
- <6>[ 3.343589] c0 0 [USB] reset
- <6>[ 3.351043] c0 0 [USB] HIGHSPEED
- <6>[ 3.447941] c0 0 [USB] check_MAC_or_LINUX: Re detect as OS_LINUX
- <4>[ 3.448437] c0 0 [USB] first_string_w_length = 255
- <6>[ 3.449557] c0 0 android_usb gadget: high-speed config #1: 66bf0c8.android_usb
- <6>[ 3.449679] c0 0 msm-dwc3 6a00000.ssusb: Avail curr from USB = 500
- <6>[ 3.449851] c0 47 BATTCHG_SUSPEND: BATTCHG_UNKNOWN_BATTERY_EN_VOTER,0 Ignoring similar vote on of val=1
- <6>[ 3.449860] c0 47 USB_SUSPEND: FAKE_BATTERY_EN_VOTER,0 Ignoring similar vote off of val=0
- <6>[ 3.450141] c0 47 USB_ICL: PSY_ICL_VOTER,0 voting on of val=500
- <6>[ 3.450147] c0 47 USB_ICL: effective vote is now 500 voted by PSY_ICL_VOTER,0
- <6>[ 3.450153] c0 47 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 500
- <6>[ 3.450159] c0 47 USB_SUSPEND: USB_EN_VOTER,2 voting off of val=0
- <6>[ 3.450163] c0 47 USB_SUSPEND: effective vote is now 0 voted by USB_EN_VOTER,2
- <6>[ 3.450347] c1 417 SMBCHG: power_ok_handler: triggered: 0x01. prev_dischg_time_ms(0) dischg_time_ms(32477919876) diff(1881818492) count_same_dischg(0) limit_iusb(0)
- <6>[ 3.450443] c0 47 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 500 mA
- <6>[ 3.450477] c0 47 SMBCHG: get_parallel_psy: parallel charger not found
- <6>[ 3.450652] c0 47 [USB] android_work : sw_suspended 0 suspended 0 config 1,connect2pc 1
- <6>[ 3.450653] c0 47 [USB] android_work : sw_connected 1 connected 1 last_uevent 1
- <6>[ 3.455059] c3 368 [S_HUB] irq_hndl: INT_st(1, 2, 3, 4) = (0x0, 0x20, 0x0, 0x0), err_st = 0x0, bch_st = 0x0
- <6>[ 3.455064] c3 368 [S_HUB] irq_hndl: CW_MCU_INT_BIT_SHUB_BOOTUP
- <6>[ 3.455123] c0 376 [S_HUB] en_shub_init[537]: s_mcu_state enter MCU_STATE_SHUB_INIT at (1971-01-11 21:38:41.872301959 UTC)
- <6>[ 3.456714] c3 368 [S_HUB] irq_hndl: INT_st(1, 2, 3, 4) = (0x0, 0x0, 0x0, 0x0), err_st = 0x0, bch_st = 0x0
- <6>[ 3.465485] c1 167 [OHIO] ohio_work_func : detect cable insertion/remove, cable_connected = 1
- <6>[ 3.484103] c0 482 [TP]:[SensorHub] Switch touch i2c to CPU
- <6>[ 3.484237] c0 482 mdss_fb_set_backlight: defer backlight value 2039
- <6>[ 3.484255] c0 482 fb_event_callback: fb0, event=9, blank=0
- <6>[ 3.484270] c0 482 [cap] fb_notifier_callback, event = 9
- <6>[ 3.484272] c0 482 [cap] cypress_cap_late_resume
- <6>[ 3.484274] c0 482 [cap] cypress_cap_pinctrl_select: set to 1
- <6>[ 3.484404] c0 482 [cap] cypress_set_sleep_mode: 0
- <6>[ 3.485279] c0 482 [BATT] fb_notifier_callback-> display is On
- <6>[ 3.485279] c0 482 [TP]:fb_notifier_callback, event 9
- <6>[ 3.491268] c3 491 mdss_mdp_splash_cleanup: Release cont_splash buffer [c0000000, 3000000, ffffff8003891000]
- <6>[ 3.497546] c0 167 [OHIO] ohio_main_process: smart_5v enabled
- <6>[ 3.497814] c0 167 [OHIO] ohio_main_process: UFP(8) FW version 0x13
- <6>[ 3.504335] c0 47 [USB] android_work: android_work: sent uevent USB_STATE=CONFIGURED
- <6>[ 3.509270] c0 491 mdss_mdp_cmd_panel_on: INTR2 Status = 0x11000110, 5
- <6>[ 3.509634] c1 491 mdss_mdp_cmd_kickoff: INTR2 Status = 0x11000110, 4
- <6>[ 3.509716] c1 491 mdss_fb_update_backlight: bl_level 2039 => 2039 / 0 => -1
- <6>[ 3.526425] c0 482 [cap] fb_notifier_callback, event = 1
- <6>[ 3.526429] c0 482 [TP]:fb_notifier_callback, event 1
- <6>[ 3.531763] c1 491 mdss_mdp_cmd_kickoff: INTR2 Status = 0x0, 3
- <6>[ 3.531830] c0 482 [cap] fb_notifier_callback, event = 1
- <6>[ 3.531832] c0 482 [TP]:fb_notifier_callback, event 1
- <6>[ 3.532015] c0 482 mdss_backlight_trans: mode=1, apply_cali=0, 255 => 4095
- <6>[ 3.584423] c1 491 mdss_mdp_cmd_kickoff: INTR2 Status = 0x11000100, 2
- <6>[ 3.584508] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 3.584513] c2 482 [TP]:fb_notifier_callback, event 1
- <5>[ 3.584988] c2 482 audit: type=1400 audit(32477922.000:8): avc: denied { write } for pid=482 comm="recovery" name="etc" dev="rootfs" ino=15460 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
- <5>[ 3.585008] c2 482 audit: type=1400 audit(32477922.000:9): avc: denied { add_name } for pid=482 comm="recovery" name="mtab" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=dir permissive=1
- <5>[ 3.585032] c2 482 audit: type=1400 audit(32477922.000:10): avc: denied { create } for pid=482 comm="recovery" name="mtab" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=1
- <6>[ 3.611753] c1 167 [OHIO] cc status 0x40
- <6>[ 3.657427] c0 376 [S_HUB] Firmware Architecture version 255, Sense version 80, Cywee lib version 6, Water number 86, Active Engine 1, Project Mapping 9
- <6>[ 3.658080] c0 376 [S_HUB] Jenkins build number 599, Build time(hh:mm) 18:17, CW branch 5, CW mcu type 1
- <6>[ 3.659793] c1 376 [S_HUB] Sensor hw_id, acc = 18, mag = 20, gyro = 18
- <6>[ 3.659833] c0 482 EXT4-fs (mmcblk0p48): mounted filesystem with ordered data mode. Opts:
- <7>[ 3.659874] c0 482 SELinux: initialized (dev mmcblk0p48, type ext4), uses xattr
- <6>[ 3.659907] c0 482 SELinux: Context u:object_r:persist_file:s0 is not valid (left unmapped).
- <6>[ 3.660407] c1 376 [S_HUB] Set g-sensor kvalue (x, y, z) = (0x3, 0xf4, 0xf2)
- <6>[ 3.661575] c1 376 [S_HUB] Set light-sensor kvalue is 2 93, gvalue is 3 fa
- <6>[ 3.662218] c1 376 [S_HUB] set proximity-sensor kvalue is 2a 0 14 0, ps_thd_add is 28
- <6>[ 3.662236] c1 376 [S_HUB] Sensor calibration matrix is (gs 1 gy 1 ls 1 bs 0)
- <4>[ 3.662251] c1 376 [S_HUB] [TP] set_tp_comb: unexpected combination = 255
- <6>[ 3.662829] c1 376 [S_HUB] [TP] set_tp_comb: status = 0
- <6>[ 3.662846] c1 376 [S_HUB] restore_st: set ges_mot param = (0x0, 0x0, 0x0, 0x0)
- <6>[ 3.664622] c0 482 mdss_backlight_trans: mode=1, apply_cali=0, 255 => 4095
- <4>[ 3.668123] c0 490 mdss-dsi-clk:[mdss_dsi_clk_req_state] Core refcount is zero for mdp_event_client
- <4>[ 3.668145] c0 490 mdss-dsi-clk:[mdss_dsi_clk_req_state] Link refcount is zero for mdp_event_client<5>[ 3.689480] c0 0 random: nonblocking pool is initialized
- <6>[ 3.691326] c0 482 EXT4-fs (mmcblk0p62): recovery complete
- <6>[ 3.691513] c0 482 EXT4-fs (mmcblk0p62): mounted filesystem with ordered data mode. Opts:
- <7>[ 3.691712] c0 482 SELinux: initialized (dev mmcblk0p62, type ext4), uses xattr
- <6>[ 3.693950] c3 376 [S_HUB] en_dl_mode(8386): ramdump dbg mode is disabled, set hub reboot state to MCU_STATE_NORMAL
- <6>[ 3.696602] c3 376 [S_HUB] en_shub_run[554]: s_mcu_state enter MCU_STATE_SHUB_RUN at (1971-01-11 21:38:42.030371878 UTC)
- <6>[ 3.732425] c0 482 EXT4-fs (mmcblk0p64): recovery complete
- <6>[ 3.732658] c0 482 EXT4-fs (mmcblk0p64): mounted filesystem with ordered data mode. Opts:
- <7>[ 3.732685] c0 482 SELinux: initialized (dev mmcblk0p64, type ext4), uses xattr
- <6>[ 3.746196] c0 482 EXT4-fs (mmcblk0p64): mounted filesystem with ordered data mode. Opts:
- <7>[ 3.746229] c0 482 SELinux: initialized (dev mmcblk0p64, type ext4), uses xattr
- <6>[ 3.771896] c3 482 EXT4-fs (mmcblk0p63): mounted filesystem with ordered data mode. Opts:
- <7>[ 3.771922] c3 482 SELinux: initialized (dev mmcblk0p63, type ext4), uses xattr
- <6>[ 3.777502] c3 482 SELinux: Context u:object_r:textclassifier_data_file:s0 is not valid (left unmapped).
- <6>[ 3.778259] c3 482 SELinux: Context u:object_r:hostapd_socket:s0 is not valid (left unmapped).
- <6>[ 3.780291] c3 482 SELinux: Context u:object_r:reboot_data_file:s0 is not valid (left unmapped).
- <6>[ 3.842765] c0 482 EXT4-fs (mmcblk0p42): mounted filesystem with ordered data mode. Opts:
- <7>[ 3.842814] c0 482 SELinux: initialized (dev mmcblk0p42, type ext4), uses xattr
- <6>[ 3.842849] c0 482 SELinux: Context u:object_r:htc_ebdlogd_file:s0 is not valid (left unmapped).
- <6>[ 3.870188] c1 482 EXT4-fs (mmcblk0p53): recovery complete
- <6>[ 3.871177] c1 482 EXT4-fs (mmcblk0p53): mounted filesystem with ordered data mode. Opts:
- <7>[ 3.871233] c1 482 SELinux: initialized (dev mmcblk0p53, type ext4), uses xattr
- <6>[ 3.871278] c1 482 SELinux: Context u:object_r:carrier_file:s0 is not valid (left unmapped).
- <6>[ 3.889201] c1 482 EXT4-fs (mmcblk0p66): mounted filesystem with ordered data mode. Opts:
- <7>[ 3.889260] c1 482 SELinux: initialized (dev mmcblk0p66, type ext4), uses xattr
- <4>[ 3.904604] c0 482 EXT4-fs (mmcblk0p65): warning: maximal mount count reached, running e2fsck is recommended
- <6>[ 3.905251] c0 482 EXT4-fs (mmcblk0p65): mounted filesystem with ordered data mode. Opts:
- <7>[ 3.905297] c0 482 SELinux: initialized (dev mmcblk0p65, type ext4), uses xattr
- <6>[ 3.921304] c3 482 EXT4-fs (mmcblk0p48): mounted filesystem with ordered data mode. Opts:
- <7>[ 3.921358] c3 482 SELinux: initialized (dev mmcblk0p48, type ext4), uses xattr
- <3>[ 3.959496] c0 482 FAT-fs (mmcblk1p1): Directory bread(block 60992) failed
- <3>[ 3.959531] c0 482 FAT-fs (mmcblk1p1): Directory bread(block 60993) failed
- <3>[ 3.959554] c0 482 FAT-fs (mmcblk1p1): Directory bread(block 60994) failed
- <3>[ 3.959576] c0 482 FAT-fs (mmcblk1p1): Directory bread(block 60995) failed
- <3>[ 3.959597] c0 482 FAT-fs (mmcblk1p1): Directory bread(block 60996) failed
- <3>[ 3.959617] c0 482 FAT-fs (mmcblk1p1): Directory bread(block 60997) failed
- <3>[ 3.959638] c0 482 FAT-fs (mmcblk1p1): Directory bread(block 60998) failed
- <3>[ 3.959658] c0 482 FAT-fs (mmcblk1p1): Directory bread(block 60999) failed
- <3>[ 3.959678] c0 482 FAT-fs (mmcblk1p1): Directory bread(block 61000) failed
- <3>[ 3.959698] c0 482 FAT-fs (mmcblk1p1): Directory bread(block 61001) failed
- <4>[ 3.960011] c0 482 FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
- <7>[ 3.960213] c0 482 SELinux: initialized (dev mmcblk1p1, type vfat), uses genfs_contexts
- <6>[ 4.051900] c1 376 [OHIO] >>Hard Reset
- <6>[ 4.074046] c2 376 Set SD SDR104 state return : 0
- <6>[ 4.486762] c0 490 hw_vsync_handler: count=0
- <6>[ 4.486813] c0 490 hw_vsync_handler: count=1
- <6>[ 4.490803] c0 0 hw_vsync_handler: count=2
- <6>[ 4.576871] c0 376 Set SD SDR104 state return : 0
- <6>[ 5.233677] c3 55 of_batterydata_get_best_profile: Find batterydata path: qcom,pme-id1-batterydata, id_ohm=11237, raw_min=0, raw_max=22000.
- <6>[ 5.239559] c3 55 BATTCHG_SUSPEND: BATTCHG_USER_EN_VOTER,1 voting off of val=0
- <6>[ 5.244393] c3 55 FG: fg_batt_profile_init: Battery SOC: 100, V: 4328130uV
- <6>[ 5.244408] c3 55 [BATT] Probe process: (1, 3)
- <6>[ 5.244425] c3 55 [BATT] htc_battery_probe_process: catch name pme_id1, set batt id=1
- <6>[ 5.244430] c3 55 [BATT] Probe process done.
- <6>[ 5.244550] c3 338 BATTCHG_SUSPEND: BATTCHG_UNKNOWN_BATTERY_EN_VOTER,0 voting off of val=0
- <6>[ 5.244557] c3 338 BATTCHG_SUSPEND: effective vote is now 0 voted by BATTCHG_UNKNOWN_BATTERY_EN_VOTER,0
- <6>[ 5.244619] c3 338 USB_SUSPEND: FAKE_BATTERY_EN_VOTER,0 Ignoring similar vote off of val=0
- <7>[ 5.244683] c1 376 [BATT] batt_worker: total_time since last batt update = 14316262896 ms.
- <6>[ 5.245053] c3 338 of_batterydata_get_best_profile: Find batterydata path: qcom,pme-id1-batterydata, id_ohm=11237, raw_min=0, raw_max=22000.
- <6>[ 5.245115] c3 338 USB_ICL: PSY_ICL_VOTER,0 Ignoring similar vote on of val=500
- <6>[ 5.247011] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:60
- <6>[ 5.247023] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
- <6>[ 5.247030] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:60
- <6>[ 5.247035] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
- <6>[ 5.247041] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:60
- <6>[ 5.247046] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
- <6>[ 5.247051] c3 338 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:60
- <6>[ 5.247056] c3 338 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
- <6>[ 5.269217] c1 376 [BATT] read_batt_cycle_info: (read from devtree) g_batt_first_use_time = 1451610001, g_overheat_55_sec = 0, g_total_level_raw = 7795, g_batt_cycle_checksum = 1451617796
- <6>[ 5.269240] c1 376 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 2016-01-01 01:00:01, g_overheat_55_sec = 0, g_total_level_raw = 7795
- <3>[ 5.269279] c1 376 [BATT] batt_check_consistent: magic_num=0x0, level_raw=100, store_soc=0, current_time:32477923, store_time=0, batt_temp=405, store_temp=252645135, consistent_flag=0 at 5269271199 (1971-01-11 21:38:43.603046722 UTC)
- <6>[ 5.269296] c1 376 [BATT] pre_level=100,pre_raw_level=100,pre_five_digit=10,pre_chg_src=0
- <6>[ 5.269308] c1 376 [BATT] batt_level_adjust: Cable plug out, to store difference between UI & SOC. store_level:0, prev_level:100, raw_level:100
- <7>[ 5.269318] c1 376 [BATT] batt_level_adjust: remap: no soc drop and no additional 1%, ui:100%
- <6>[ 5.269327] c1 376 ignore the fist time on boot.
- <6>[ 5.269393] c1 38 BATTCHG_SUSPEND: BATTCHG_UNKNOWN_BATTERY_EN_VOTER,0 Ignoring similar vote off of val=0
- <6>[ 5.269406] c1 38 USB_SUSPEND: FAKE_BATTERY_EN_VOTER,0 Ignoring similar vote off of val=0
- <6>[ 5.269514] c1 38 USB_ICL: PSY_ICL_VOTER,0 voting on of val=0
- <6>[ 5.269523] c1 38 USB_ICL: effective vote is now 0 voted by PSY_ICL_VOTER,0
- <6>[ 5.269533] c1 38 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0
- <6>[ 5.269542] c1 38 USB_SUSPEND: USB_EN_VOTER,2 voting on of val=1
- <6>[ 5.269550] c1 38 USB_SUSPEND: effective vote is now 1 voted by USB_EN_VOTER,2
- <6>[ 5.269595] c1 38 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 0 mA
- <6>[ 5.269625] c1 38 SMBCHG: get_parallel_psy: parallel charger not found
- <6>[ 5.269699] c0 417 SMBCHG: power_ok_handler: triggered: 0x00.
- <6>[ 5.270186] c0 376 SMBCHG: charger_dump_all: [BATT][SMBCHG] 0x100E=89,0x1010=00,0x10FC=42,0x1210=00,0x1242=00,0x130D=08,0x1310=04,0x1340=12,0x13F3=04,0x13F4=11,0x1610=00,0x13F2=07,0x1307=10,0x1608=10,0x16F5=38,cc=0uAh,warm_temp=470,cool_temp=100,C_workable=0,pmic=rev1.1
- <14>[ 5.270526] c1 483 [CHRG_LED]: void update_led(int): is RGB LED='1'
- <14>[ 5.270596] c1 483 [CHRG_LED]: void update_led(int): setting charging status '5'
- <6>[ 5.270619] c1 483 [LED] led_multi_color_store , ModeRGB = 100c800
- <6>[ 5.270629] c1 483 [LED] led_multi_color_store , ModeRGB = 100c800
- <6>[ 5.270662] c0 374 [LED] led_multicolor_work_func , Mode = 1
- <6>[ 5.270674] c0 374 [LED]qpnp_rgb_set, name:rgb_amber, brightness = 0 status: 1
- <3>[ 5.270766] c1 360 [BATT] chg_full_check_worker: vol:4328, curr=513, is_full_count=0, is_full=0 at 5270772606 (1971-01-11 21:38:43.604534951 UTC)
- <6>[ 5.270951] c0 374 [LED]qpnp_rgb_set, name:rgb_green, brightness = 0 status: 0
- <6>[ 5.271094] c0 374 [LED]qpnp_rgb_set, name:rgb_amber, brightness = 0 status: 0
- <6>[ 5.271237] c0 374 [LED]qpnp_rgb_set, name:rgb_green, brightness = 1 status: 0
- <3>[ 5.290633] c0 376 [BATT] ID=1,level=100,level_raw=100,vol=4328mV,temp=405,current=513455uA,chg_name=NONE,chg_src=0,chg_en=0,health=0,overload=0,duration=0min,vbus=5089mV,max_iusb=0mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,ibat_new=0mA,htc_ext=0x00,level_accu=7795,surf_temp=41,htcchg=0,usb_temp=381,usb_overheat=0,usb_overheat_stat=0,batt_state=0 at 5290630576 (1971-01-11 21:38:43.620810005 UTC)
- <7>[ 5.315896] c0 376 [BATT] batt_worker: total_time since last batt update = 70 ms.
- <3>[ 5.342586] c0 376 [BATT] set_batt_psy_property. value(0) prop(95) at 5342586259 (1971-01-11 21:38:43.676355323 UTC)
- <6>[ 5.342693] c0 376 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 2016-01-01 01:00:01, g_overheat_55_sec = 0, g_total_level_raw = 7795
- <7>[ 5.342713] c0 376 [BATT] batt_level_adjust: pre_level=100, new_level=100, level would use raw level!
- <3>[ 5.342731] c0 376 [BATT] set charging_current(500000) at 5342724696 (1971-01-11 21:38:43.676502562 UTC)
- <6>[ 5.342773] c0 376 SMBCHG: pmi8994_set_float_voltage_comp: set vfloat comp = 0
- <6>[ 5.342819] c0 490 BATTCHG_SUSPEND: BATTCHG_UNKNOWN_BATTERY_EN_VOTER,0 Ignoring similar vote off of val=0
- <6>[ 5.342838] c0 490 USB_SUSPEND: FAKE_BATTERY_EN_VOTER,0 Ignoring similar vote off of val=0
- <6>[ 5.342918] c0 490 USB_ICL: PSY_ICL_VOTER,0 voting on of val=500
- <6>[ 5.342934] c0 490 USB_ICL: effective vote is now 500 voted by PSY_ICL_VOTER,0
- <6>[ 5.342949] c0 490 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 500
- <6>[ 5.342964] c0 490 USB_SUSPEND: USB_EN_VOTER,2 voting off of val=0
- <6>[ 5.342979] c0 490 USB_SUSPEND: effective vote is now 0 voted by USB_EN_VOTER,2
- <6>[ 5.343195] c1 417 SMBCHG: power_ok_handler: triggered: 0x01. prev_dischg_time_ms(32477919876) dischg_time_ms(73) diff(1881818565) count_same_dischg(0) limit_iusb(0)
- <6>[ 5.343219] c0 490 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 500 mA
- <6>[ 5.343262] c0 490 SMBCHG: get_parallel_psy: parallel charger not found
- <3>[ 5.343315] c1 376 [BATT] set ibat(2100000) at 5343310946 (1971-01-11 21:38:43.677086312 UTC)
- <3>[ 5.343341] c1 376 [BATT] set_batt_psy_property. value(1) prop(68) at 5343370530 (1971-01-11 21:38:43.677112458 UTC)
- <6>[ 5.343404] c1 376 BATTCHG_SUSPEND: BATTCHG_USER_EN_VOTER,1 Ignoring similar vote off of val=0
- <3>[ 5.343733] c1 376 [BATT] set_batt_psy_property. value(2100000) prop(32) at 5343731884 (1971-01-11 21:38:43.677502823 UTC)
- <6>[ 5.343762] c1 376 SMBCHG: smbchg_set_fastchg_current_user: User setting FCC to 2100
- <6>[ 5.343781] c1 376 BATT_FCC: BATT_TYPE_FCC_VOTER,0 voting on of val=2100
- <6>[ 5.343797] c1 376 BATT_FCC: effective vote is now 2100 voted by BATT_TYPE_FCC_VOTER,0
- <6>[ 5.343880] c1 376 SMBCHG: smbchg_set_fastchg_current_raw: fastcharge current requested 2100, set to 2100
- <6>[ 5.343905] c1 376 SMBCHG: get_parallel_psy: parallel charger not found
- <6>[ 5.344354] c1 376 SMBCHG: charger_dump_all: [BATT][SMBCHG] 0x100E=89,0x1010=00,0x10FC=42,0x1210=00,0x1242=00,0x130D=08,0x1310=04,0x1340=02,0x13F3=04,0x13F4=11,0x1610=01,0x13F2=07,0x1307=10,0x1608=10,0x16F5=38,cc=0uAh,warm_temp=470,cool_temp=100,C_workable=0,pmic=rev1.1
- <3>[ 5.347311] c1 376 [BATT] ID=1,level=100,level_raw=100,vol=4328mV,temp=405,current=513455uA,chg_name=USB,chg_src=1,chg_en=1,health=1,overload=0,duration=0min,vbus=5089mV,max_iusb=500mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,ibat_new=2100mA,htc_ext=0x00,level_accu=7795,surf_temp=41,htcchg=0,usb_temp=381,usb_overheat=0,usb_overheat_stat=0,batt_state=0 at 5347313603 (1971-01-11 21:38:43.679687667 UTC)
- <3>[ 5.596479] c1 482 FAT-fs (mmcblk1p1): Directory bread(block 60992) failed
- <3>[ 5.596515] c1 482 FAT-fs (mmcblk1p1): Directory bread(block 60993) failed
- <3>[ 5.596538] c1 482 FAT-fs (mmcblk1p1): Directory bread(block 60994) failed
- <3>[ 5.596559] c1 482 FAT-fs (mmcblk1p1): Directory bread(block 60995) failed
- <3>[ 5.596580] c1 482 FAT-fs (mmcblk1p1): Directory bread(block 60996) failed
- <3>[ 5.596601] c1 482 FAT-fs (mmcblk1p1): Directory bread(block 60997) failed
- <3>[ 5.596622] c1 482 FAT-fs (mmcblk1p1): Directory bread(block 60998) failed
- <3>[ 5.596643] c1 482 FAT-fs (mmcblk1p1): Directory bread(block 60999) failed
- <3>[ 5.596663] c1 482 FAT-fs (mmcblk1p1): Directory bread(block 61000) failed
- <3>[ 5.596768] c1 482 FAT-fs (mmcblk1p1): Directory bread(block 61001) failed
- <4>[ 5.597073] c1 482 FAT-fs (mmcblk1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
- <7>[ 5.597112] c1 482 SELinux: initialized (dev mmcblk1p1, type vfat), uses genfs_contexts
- <6>[ 5.647281] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:47
- <6>[ 5.647312] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
- <6>[ 5.647331] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:47
- <6>[ 5.647347] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
- <6>[ 5.647363] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:47
- <6>[ 5.647378] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
- <6>[ 5.647393] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:47
- <6>[ 5.647407] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
- <6>[ 5.677067] c0 470 Set SD SDR104 state return : 0
- <6>[ 5.689113] c3 402 SMBCHG: fastchg_handler: p2f triggered
- <6>[ 5.689191] c3 402 SMBCHG: get_parallel_psy: parallel charger not found
- <6>[ 5.689213] c3 402 SMBCHG: get_parallel_psy: parallel charger not found
- <6>[ 6.049901] c1 482 mdss_backlight_trans: mode=1, apply_cali=0, 255 => 4095
- <11>[ 6.053089] c1 1 init: avc: denied { set } for property=sys.usb.config pid=482 uid=0 gid=0 scontext=u:r:recovery:s0 tcontext=u:object_r:system_radio_prop:s0 tclass=property_service permissive=1
- <13>[ 6.053198] c1 1 init: Service 'adbd' is being killed...
- <6>[ 6.053499] c1 1 [USB] enable_store: enable_store: soft disconnect : 0
- <3>[ 6.053525] c1 1 dwc3 6a00000.dwc3: request ffffffc0f2b74100 was not queued to ep0out
- <13>[ 6.053964] c1 1 init: Service 'adbd' is being killed...
- <6>[ 6.054100] c1 1 [USB] enable_store: enable_store: soft disconnect : 0
- <6>[ 6.054325] c1 1 [USB] functions_store: functions_store: switch function to mtp,adb
- <13>[ 6.054517] c1 1 init: Service 'adbd' (pid 484) killed by signal 9
- <13>[ 6.054543] c1 1 init: Service 'adbd' (pid 484) killing any children in process group
- <6>[ 6.054701] c1 1 [USB] enable_store: enable_store: soft disconnect : 1
- <13>[ 6.054765] c1 1 init: Starting service 'adbd'...
- <13>[ 6.055453] c1 1 init: write_file: Unable to open '/sys/devices/platform/android_usb/usb_function_switch': Permission denied
- <6>[ 6.060362] c3 523 read descriptors
- <6>[ 6.060400] c3 523 read strings
- <6>[ 6.060443] c3 523 mtp_bind_config
- <6>[ 6.134402] c1 482 EXT4-fs (mmcblk0p63): mounted filesystem with ordered data mode. Opts:
- <7>[ 6.134448] c1 482 SELinux: initialized (dev mmcblk0p63, type ext4), uses xattr
- <4>[ 6.135548] c3 528 audit_printk_skb: 522 callbacks suppressed
- <5>[ 6.135562] c3 528 audit: type=1400 audit(32477924.080:185): avc: denied { create } for pid=482 comm="recovery" name="twadbfifo" scontext=u:r:recovery:s0 tcontext=u:object_r:tmpfs:s0 tclass=fifo_file permissive=1
- <5>[ 6.135598] c2 482 audit: type=1400 audit(32477924.080:186): avc: denied { create } for pid=482 comm="recovery" name="orsin" scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=fifo_file permissive=1
- <5>[ 6.135604] c3 528 audit: type=1400 audit(32477924.080:187): avc: denied { read } for pid=482 comm="recovery" name="twadbfifo" dev="tmpfs" ino=17590 scontext=u:r:recovery:s0 tcontext=u:object_r:tmpfs:s0 tclass=fifo_file permissive=1
- <5>[ 6.135619] c3 528 audit: type=1400 audit(32477924.080:188): avc: denied { open } for pid=482 comm="recovery" path="/tmp/twadbfifo" dev="tmpfs" ino=17590 scontext=u:r:recovery:s0 tcontext=u:object_r:tmpfs:s0 tclass=fifo_file permissive=1
- <5>[ 6.135662] c2 482 audit: type=1400 audit(32477924.080:189): avc: denied { read } for pid=482 comm="recovery" name="orsin" dev="rootfs" ino=1959 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=fifo_file permissive=1
- <5>[ 6.135681] c2 482 audit: type=1400 audit(32477924.080:190): avc: denied { open } for pid=482 comm="recovery" path="/sbin/orsin" dev="rootfs" ino=1959 scontext=u:r:recovery:s0 tcontext=u:object_r:rootfs:s0 tclass=fifo_file permissive=1
- <5>[ 6.136368] c2 482 audit: type=1400 audit(32477924.080:191): avc: denied { read } for pid=482 comm="recovery" scontext=u:r:recovery:s0 tcontext=u:r:recovery:s0 tclass=netlink_kobject_uevent_socket permissive=1
- <6>[ 6.183591] c1 376 Set SD SDR104 state return : 0
- <6>[ 6.192488] c1 491 mdss_mdp_cmd_kickoff: INTR2 Status = 0x110, 1
- <6>[ 6.192627] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 6.192631] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 6.199579] c0 0 [USB] suspend
- <3>[ 6.199608] c0 0 [USB] dwc3_gadget_suspend_interrupt(): state:0. Ignore SUSPEND.
- <6>[ 6.375740] c0 0 [USB] reset
- <6>[ 6.375798] c0 0 msm-dwc3 6a00000.ssusb: Avail curr from USB = 0
- <6>[ 6.375893] c0 490 BATTCHG_SUSPEND: BATTCHG_UNKNOWN_BATTERY_EN_VOTER,0 Ignoring similar vote off of val=0
- <6>[ 6.375914] c0 490 USB_SUSPEND: FAKE_BATTERY_EN_VOTER,0 Ignoring similar vote off of val=0
- <6>[ 6.375998] c0 490 USB_ICL: PSY_ICL_VOTER,0 voting on of val=0
- <6>[ 6.376013] c0 490 USB_ICL: effective vote is now 0 voted by PSY_ICL_VOTER,0
- <6>[ 6.376028] c0 490 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 0
- <6>[ 6.376043] c0 490 USB_SUSPEND: USB_EN_VOTER,2 voting on of val=1
- <6>[ 6.376056] c0 490 USB_SUSPEND: effective vote is now 1 voted by USB_EN_VOTER,2
- <6>[ 6.376110] c0 490 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 0 mA
- <6>[ 6.376208] c1 417 SMBCHG: power_ok_handler: triggered: 0x00.
- <6>[ 6.376241] c0 490 SMBCHG: get_parallel_psy: parallel charger not found
- <6>[ 6.376641] c1 483 [BATT] cancel chg_full_check_work when plug out.
- <7>[ 6.376854] c1 376 [BATT] batt_worker: total_time since last batt update = 1063 ms.
- <6>[ 6.380567] c3 402 SMBCHG: fastchg_handler: p2f triggered
- <6>[ 6.380615] c3 402 SMBCHG: get_parallel_psy: parallel charger not found
- <6>[ 6.380623] c3 402 SMBCHG: get_parallel_psy: parallel charger not found
- <6>[ 6.386810] c0 0 [USB] HIGHSPEED
- <3>[ 6.399254] c1 376 [BATT] set_batt_psy_property. value(0) prop(95) at 6399250894 (1971-01-11 21:38:44.347156597 UTC)
- <6>[ 6.399289] c1 376 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 2016-01-01 01:00:01, g_overheat_55_sec = 0, g_total_level_raw = 7795
- <6>[ 6.399308] c1 376 [BATT] batt_level_adjust: Cable plug out when level 100, reset timer.
- <6>[ 6.399395] c1 360 BATTCHG_SUSPEND: BATTCHG_UNKNOWN_BATTERY_EN_VOTER,0 Ignoring similar vote off of val=0
- <6>[ 6.399416] c1 360 USB_SUSPEND: FAKE_BATTERY_EN_VOTER,0 Ignoring similar vote off of val=0
- <6>[ 6.399496] c1 360 USB_ICL: PSY_ICL_VOTER,0 Ignoring similar vote on of val=0
- <6>[ 6.400524] c0 376 SMBCHG: charger_dump_all: [BATT][SMBCHG] 0x100E=80,0x1010=00,0x10FC=42,0x1210=00,0x1242=00,0x130D=08,0x1310=04,0x1340=12,0x13F3=04,0x13F4=11,0x1610=00,0x13F2=07,0x1307=10,0x1608=10,0x16F5=38,cc=0uAh,warm_temp=470,cool_temp=100,C_workable=0,pmic=rev1.1
- <3>[ 6.403489] c0 376 [BATT] ID=1,level=100,level_raw=100,vol=4328mV,temp=405,current=513455uA,chg_name=NONE,chg_src=0,chg_en=0,health=1,overload=0,duration=0min,vbus=5093mV,max_iusb=0mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,ibat_new=0mA,htc_ext=0x00,level_accu=7795,surf_temp=41,htcchg=0,usb_temp=381,usb_overheat=0,usb_overheat_stat=0,batt_state=0 at 6403489436 (1971-01-11 21:38:44.349990191 UTC)
- <6>[ 6.459441] c0 0 [USB] reset
- <6>[ 6.466902] c0 0 [USB] HIGHSPEED
- <6>[ 6.567871] c0 0 [USB] check_MAC_or_LINUX: Re detect as OS_LINUX
- <6>[ 6.569469] c0 0 android_usb gadget: high-speed config #1: 66bf0c8.android_usb
- <6>[ 6.569643] c0 0 msm-dwc3 6a00000.ssusb: Avail curr from USB = 500
- <6>[ 6.569789] c0 490 BATTCHG_SUSPEND: BATTCHG_UNKNOWN_BATTERY_EN_VOTER,0 Ignoring similar vote off of val=0
- <6>[ 6.569810] c0 490 USB_SUSPEND: FAKE_BATTERY_EN_VOTER,0 Ignoring similar vote off of val=0
- <6>[ 6.570009] c0 490 USB_ICL: PSY_ICL_VOTER,0 voting on of val=500
- <6>[ 6.570163] c0 490 USB_ICL: effective vote is now 500 voted by PSY_ICL_VOTER,0
- <6>[ 6.570181] c0 490 SMBCHG: smbchg_set_usb_current_max: USB current_ma = 500
- <6>[ 6.570197] c0 490 USB_SUSPEND: USB_EN_VOTER,2 voting off of val=0
- <6>[ 6.570213] c0 490 USB_SUSPEND: effective vote is now 0 voted by USB_EN_VOTER,2
- <6>[ 6.570427] c1 417 SMBCHG: power_ok_handler: triggered: 0x01. prev_dischg_time_ms(73) dischg_time_ms(194) diff(121) count_same_dischg(1) limit_iusb(0)
- <6>[ 6.570449] c0 490 SMBCHG: smbchg_set_usb_current_max: usb type = 4 current set to 500 mA
- <6>[ 6.570493] c0 490 SMBCHG: get_parallel_psy: parallel charger not found
- <3>[ 6.570976] c1 360 [BATT] chg_full_check_worker: vol:4328, curr=513, is_full_count=0, is_full=0
- <6>[ 6.570988] c0 490 [USB] android_work : sw_suspended 0 suspended 0 config 1,connect2pc 1
- <6>[ 6.570989] c0 490 [USB] android_work : sw_connected 1 connected 1 last_uevent 2
- <6>[ 6.570998] c0 490 [USB] android_work: android_work: sent missed DISCONNECT event
- <4>[ 6.571021] c1 360 at 6571001224 (1971-01-11 21:38:44.518869687 UTC)
- <7>[ 6.571095] c1 376 [BATT] batt_worker: total_time since last batt update = 193 ms.
- <3>[ 6.595936] c1 376 [BATT] set_batt_psy_property. value(0) prop(95) at 6595937164 (1971-01-11 21:38:44.543838908 UTC)
- <6>[ 6.595977] c1 376 [BATT] calculate_batt_cycle_info: g_batt_first_use_time = 2016-01-01 01:00:01, g_overheat_55_sec = 0, g_total_level_raw = 7795
- <7>[ 6.595997] c1 376 [BATT] batt_level_adjust: pre_level=100, new_level=100, level would use raw level!
- <3>[ 6.596013] c1 376 [BATT] set charging_current(500000) at 6596007372 (1971-01-11 21:38:44.543919220 UTC)
- <6>[ 6.596111] c1 360 BATTCHG_SUSPEND: BATTCHG_UNKNOWN_BATTERY_EN_VOTER,0 Ignoring similar vote off of val=0
- <6>[ 6.596131] c1 360 USB_SUSPEND: FAKE_BATTERY_EN_VOTER,0 Ignoring similar vote off of val=0
- <6>[ 6.596212] c1 360 USB_ICL: PSY_ICL_VOTER,0 Ignoring similar vote on of val=500
- <6>[ 6.597111] c1 376 SMBCHG: charger_dump_all: [BATT][SMBCHG] 0x100E=83,0x1010=00,0x10FC=42,0x1210=00,0x1242=00,0x130D=08,0x1310=04,0x1340=02,0x13F3=04,0x13F4=11,0x1610=01,0x13F2=07,0x1307=10,0x1608=10,0x16F5=38,cc=0uAh,warm_temp=470,cool_temp=100,C_workable=0,pmic=rev1.1
- <3>[ 6.600088] c0 376 [BATT] ID=1,level=100,level_raw=100,vol=4328mV,temp=405,current=513455uA,chg_name=USB,chg_src=1,chg_en=1,health=1,overload=0,duration=0min,vbus=4768mV,max_iusb=500mA,chg_limit_reason=0,chg_stop_reason=0,consistent=-1,flag=0x00000000,AICL=1700mA,ibat_new=2100mA,htc_ext=0x00,level_accu=7795,surf_temp=41,htcchg=0,usb_temp=381,usb_overheat=0,usb_overheat_stat=0,batt_state=0 at 6600088258 (1971-01-11 21:38:44.546554221 UTC)
- <6>[ 6.646807] c0 490 [USB] android_work: android_work: sent uevent USB_STATE=CONFIGURED
- <6>[ 6.672862] c3 402 SMBCHG: fastchg_handler: p2f triggered
- <6>[ 6.672906] c3 402 SMBCHG: get_parallel_psy: parallel charger not found
- <6>[ 6.672914] c3 402 SMBCHG: get_parallel_psy: parallel charger not found
- <6>[ 6.853431] c0 376 mmc0 Statistics: write 664 KB in 38 ms, perf 17079 KB/s, rq 107
- <6>[ 6.853461] c0 376 mmc0 Statistics: read 15464 KB in 295 ms, perf 52315 KB/s, rq 566
- <5>[ 6.858647] c3 522 audit: type=1400 audit(32477924.803:192): avc: denied { read write } for pid=522 comm="recovery" name="mtp_usb" dev="tmpfs" ino=1840 scontext=u:r:recovery:s0 tcontext=u:object_r:mtp_device:s0 tclass=chr_file permissive=1
- <5>[ 6.858715] c3 522 audit: type=1400 audit(32477924.803:193): avc: denied { open } for pid=522 comm="recovery" path="/dev/mtp_usb" dev="tmpfs" ino=1840 scontext=u:r:recovery:s0 tcontext=u:object_r:mtp_device:s0 tclass=chr_file permissive=1
- <6>[ 6.858746] c3 522 mtp_open
- <5>[ 6.861093] c2 530 audit: type=1400 audit(32477924.806:194): avc: denied { read } for pid=522 comm="recovery" name="/" dev="mmcblk1p1" ino=1 scontext=u:r:recovery:s0 tcontext=u:object_r:vfat:s0 tclass=dir permissive=1
- <6>[ 7.146792] c1 374 mmc1 Statistics: write 0 KB in 4 ms, perf 0 KB/s, rq 1
- <6>[ 7.146817] c1 374 mmc1 Statistics: read 30977 KB in 860 ms, perf 36004 KB/s, rq 1314
- <6>[ 9.212824] c1 374 [OHIO] >>Hard Reset
- <6>[ 9.343499] c0 361 SD : Disabling slot power
- <6>[ 9.493495] c0 0 hw_vsync_handler: count=0
- <6>[ 9.493539] c0 0 hw_vsync_handler: count=1
- <6>[ 9.499259] c0 0 hw_vsync_handler: count=2
- <6>[ 10.971362] c0 482 [VIB] en=80
- <6>[ 10.973074] c3 448 [TP]:[NS]: IM:32, CIDIM:0, Freq:0, NS:1
- <6>[ 10.978092] c0 490 [VIB] on x80
- <6>[ 11.029239] c1 491 mdss_mdp_cmd_kickoff: INTR2 Status = 0x11000110, 0
- <6>[ 11.029325] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 11.029329] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 11.046996] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:66
- <6>[ 11.047010] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
- <6>[ 11.047016] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:66
- <6>[ 11.047021] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
- <6>[ 11.047027] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:66
- <6>[ 11.047032] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
- <6>[ 11.047037] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:66
- <6>[ 11.047042] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
- <6>[ 11.050518] c3 482 [cap] fb_notifier_callback, event = 1
- <6>[ 11.050522] c3 482 [TP]:fb_notifier_callback, event 1
- <6>[ 11.051444] c0 490 [VIB] off
- <6>[ 11.092134] c3 482 [cap] fb_notifier_callback, event = 1
- <6>[ 11.092139] c3 482 [TP]:fb_notifier_callback, event 1
- <6>[ 11.646984] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:44
- <6>[ 11.646997] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
- <6>[ 11.647004] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:44
- <6>[ 11.647010] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
- <6>[ 11.647017] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:44
- <6>[ 11.647023] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
- <6>[ 11.647029] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:44
- <6>[ 11.647035] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
- <6>[ 13.762909] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 13.762913] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 13.885948] c1 482 EXT4-fs (mmcblk0p63): mounted filesystem with ordered data mode. Opts:
- <7>[ 13.886010] c1 482 SELinux: initialized (dev mmcblk0p63, type ext4), uses xattr
- <6>[ 13.886306] c1 482 [VIB] en=80
- <6>[ 13.886477] c1 360 [VIB] on x82
- <6>[ 13.937120] c0 482 [cap] fb_notifier_callback, event = 1
- <6>[ 13.937144] c1 482 [TP]:fb_notifier_callback, event 1
- <6>[ 13.966376] c1 360 [VIB] off
- <6>[ 14.372594] c0 376 [OHIO] >>Hard Reset
- <6>[ 14.506821] c0 490 hw_vsync_handler: count=0
- <6>[ 14.506891] c0 490 hw_vsync_handler: count=1
- <6>[ 14.524218] c0 0 hw_vsync_handler: count=2
- <6>[ 15.081804] c2 482 [VIB] en=80
- <6>[ 15.081966] c2 396 [VIB] on x82
- <6>[ 15.135093] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 15.135097] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 15.161879] c2 396 [VIB] off
- <6>[ 15.218118] c3 482 [cap] fb_notifier_callback, event = 1
- <6>[ 15.218122] c3 482 [TP]:fb_notifier_callback, event 1
- <3>[ 16.586805] c1 360 [BATT] chg_full_check_worker: vol:4328, curr=513, is_full_count=0, is_full=0 at 16586812117 (1971-01-11 21:38:54.534703080 UTC)
- <6>[ 16.699609] c3 482 [VIB] en=80
- <6>[ 16.699755] c3 520 [VIB] on x82
- <6>[ 16.746997] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:67
- <6>[ 16.747012] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
- <6>[ 16.747018] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:67
- <6>[ 16.747023] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
- <6>[ 16.747029] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:67
- <6>[ 16.747034] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
- <6>[ 16.747039] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:67
- <6>[ 16.747044] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
- <6>[ 16.768801] c3 482 [cap] fb_notifier_callback, event = 1
- <6>[ 16.768805] c3 482 [TP]:fb_notifier_callback, event 1
- <6>[ 16.779718] c3 520 [VIB] off
- <6>[ 16.800165] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 16.800170] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 16.846980] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:45
- <6>[ 16.846990] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
- <6>[ 16.846998] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:45
- <6>[ 16.847004] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
- <6>[ 16.847011] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:45
- <6>[ 16.847017] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
- <6>[ 16.847023] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:45
- <6>[ 16.847029] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
- <6>[ 17.923959] c2 482 [VIB] en=80
- <6>[ 17.924113] c2 396 [VIB] on x82
- <6>[ 17.993688] c3 482 [cap] fb_notifier_callback, event = 1
- <6>[ 17.993692] c3 482 [TP]:fb_notifier_callback, event 1
- <6>[ 18.004039] c2 396 [VIB] off
- <6>[ 19.362604] c3 482 [VIB] en=80
- <6>[ 19.362828] c3 520 [VIB] on x82
- <6>[ 19.412290] c3 482 [cap] fb_notifier_callback, event = 1
- <6>[ 19.412295] c3 482 [TP]:fb_notifier_callback, event 1
- <6>[ 19.442672] c3 520 [VIB] off
- <6>[ 19.480393] c3 482 [cap] fb_notifier_callback, event = 1
- <6>[ 19.480397] c3 482 [TP]:fb_notifier_callback, event 1
- <6>[ 19.533457] c0 490 hw_vsync_handler: count=0
- <6>[ 19.533526] c0 490 hw_vsync_handler: count=1
- <6>[ 19.549086] c0 0 hw_vsync_handler: count=2
- <6>[ 19.948989] c2 482 [VIB] en=80
- <6>[ 19.949092] c2 396 [VIB] on x82
- <6>[ 20.016566] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 20.016570] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 20.029097] c2 396 [VIB] off
- <6>[ 20.038910] c3 482 [cap] fb_notifier_callback, event = 1
- <6>[ 20.038915] c3 482 [TP]:fb_notifier_callback, event 1
- <6>[ 20.046954] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:61
- <6>[ 20.046962] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
- <6>[ 20.046968] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:61
- <6>[ 20.046974] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
- <6>[ 20.046980] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:61
- <6>[ 20.046985] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
- <6>[ 20.046990] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:61
- <6>[ 20.046995] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
- <6>[ 20.080172] c3 482 [cap] fb_notifier_callback, event = 1
- <6>[ 20.080177] c3 482 [TP]:fb_notifier_callback, event 1
- <6>[ 20.646972] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:45
- <6>[ 20.646984] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
- <6>[ 20.646992] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:45
- <6>[ 20.646998] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
- <6>[ 20.647005] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:45
- <6>[ 20.647011] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
- <6>[ 20.647017] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:45
- <6>[ 20.647023] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
- <6>[ 22.628435] c3 482 [cap] fb_notifier_callback, event = 1
- <6>[ 22.628439] c3 482 [TP]:fb_notifier_callback, event 1
- <6>[ 22.747003] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:69
- <6>[ 22.747016] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
- <6>[ 22.747023] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:69
- <6>[ 22.747028] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
- <6>[ 22.747034] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:69
- <6>[ 22.747039] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
- <6>[ 22.747044] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:69
- <6>[ 22.747049] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
- <6>[ 22.754884] c3 482 [cap] fb_notifier_callback, event = 1
- <6>[ 22.754888] c3 482 [TP]:fb_notifier_callback, event 1
- <6>[ 22.755102] c3 482 [VIB] en=80
- <6>[ 22.755215] c3 520 [VIB] on x82
- <4>[ 22.762283] c3 482 audit_printk_skb: 3 callbacks suppressed
- <5>[ 22.762292] c3 482 audit: type=1400 audit(32477940.706:196): avc: denied { getattr } for pid=482 comm="recovery" path="/data/.layout_version" dev="mmcblk0p64" ino=12 scontext=u:r:recovery:s0 tcontext=u:object_r:install_data_file:s0 tclass=file permissive=1
- <6>[ 22.793680] c3 482 [cap] fb_notifier_callback, event = 1
- <6>[ 22.793684] c3 482 [TP]:fb_notifier_callback, event 1
- <6>[ 22.835151] c3 520 [VIB] off
- <6>[ 23.346964] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:44
- <6>[ 23.346974] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
- <6>[ 23.346982] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:44
- <6>[ 23.346988] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
- <6>[ 23.346994] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:44
- <6>[ 23.347001] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
- <6>[ 23.347007] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:44
- <6>[ 23.347012] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
- <6>[ 24.560165] c0 0 hw_vsync_handler: count=0
- <6>[ 24.560210] c0 0 hw_vsync_handler: count=1
- <6>[ 24.574442] c0 0 hw_vsync_handler: count=2
- <3>[ 26.613443] c1 360 [BATT] chg_full_check_worker: vol:4328, curr=513, is_full_count=0, is_full=0 at 26613451345 (1971-01-11 21:39:04.561342256 UTC)
- <6>[ 26.898538] c3 482 [cap] fb_notifier_callback, event = 1
- <6>[ 26.898543] c3 482 [TP]:fb_notifier_callback, event 1
- <6>[ 26.947033] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:66
- <6>[ 26.947047] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
- <6>[ 26.947053] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:66
- <6>[ 26.947059] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
- <6>[ 26.947064] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:66
- <6>[ 26.947069] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
- <6>[ 26.947075] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:66
- <6>[ 26.947079] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
- <6>[ 26.967684] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 26.967688] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 27.001868] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 27.001872] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 27.035863] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 27.035868] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 27.047038] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:46
- <6>[ 27.047054] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
- <6>[ 27.047061] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:46
- <6>[ 27.047067] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
- <6>[ 27.047074] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:46
- <6>[ 27.047080] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
- <6>[ 27.047086] c3 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:46
- <6>[ 27.047092] c3 520 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
- <6>[ 27.067306] c3 482 [cap] fb_notifier_callback, event = 1
- <6>[ 27.067310] c3 482 [TP]:fb_notifier_callback, event 1
- <6>[ 27.099514] c3 482 [cap] fb_notifier_callback, event = 1
- <6>[ 27.099518] c3 482 [TP]:fb_notifier_callback, event 1
- <6>[ 27.131781] c3 482 [cap] fb_notifier_callback, event = 1
- <6>[ 27.131785] c3 482 [TP]:fb_notifier_callback, event 1
- <6>[ 27.146903] c3 520 msm_thermal:do_core_control Set Offline: CPU3 Temp: 71
- <4>[ 27.147799] c3 19 IRQ132 no longer affine to CPU3
- <4>[ 27.147806] c3 19 IRQ133 no longer affine to CPU3
- <4>[ 27.147812] c3 19 IRQ134 no longer affine to CPU3
- <4>[ 27.147818] c3 19 IRQ135 no longer affine to CPU3
- <4>[ 27.147823] c3 19 IRQ136 no longer affine to CPU3
- <4>[ 27.147829] c3 19 IRQ137 no longer affine to CPU3
- <4>[ 27.147834] c3 19 IRQ138 no longer affine to CPU3
- <4>[ 27.147839] c3 19 IRQ139 no longer affine to CPU3
- <4>[ 27.147845] c3 19 IRQ140 no longer affine to CPU3
- <4>[ 27.147850] c3 19 IRQ141 no longer affine to CPU3
- <6>[ 27.150871] c0 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:71
- <6>[ 27.150898] c0 520 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
- <6>[ 27.150916] c0 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:71
- <6>[ 27.150931] c0 520 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
- <6>[ 27.150947] c0 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:71
- <6>[ 27.150962] c0 520 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
- <6>[ 27.151004] c0 520 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:71
- <6>[ 27.151020] c0 520 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
- <6>[ 27.169769] c0 482 [cap] fb_notifier_callback, event = 1
- <6>[ 27.169777] c0 482 [TP]:fb_notifier_callback, event 1
- <6>[ 27.202214] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 27.202217] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 27.235869] c0 482 [cap] fb_notifier_callback, event = 1
- <6>[ 27.235876] c0 482 [TP]:fb_notifier_callback, event 1
- <6>[ 27.250272] c0 490 msm_thermal:do_core_control Allow Online CPU3 Temp: 47
- <6>[ 27.250653] c3 0 Detected PIPT I-cache on CPU3
- <6>[ 27.250687] c3 0 CPU3: found redistributor 101 region 0:0x0000000009cc0000
- <6>[ 27.250785] c3 0 CPU3: Booted secondary processor [511f2052]
- <6>[ 27.259626] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:47
- <6>[ 27.259653] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
- <6>[ 27.259671] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:47
- <6>[ 27.259685] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
- <6>[ 27.259700] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:47
- <6>[ 27.259714] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
- <6>[ 27.259758] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:47
- <6>[ 27.259772] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
- <6>[ 27.268441] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 27.268446] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 27.299257] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 27.299262] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 27.331221] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 27.331226] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 27.364604] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 27.364608] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 27.398092] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 27.398096] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 27.431550] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 27.431554] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 27.464118] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 27.464122] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 27.497566] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 27.497571] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 27.531141] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 27.531146] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 27.564784] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 27.564788] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 27.597923] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 27.597928] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 27.631480] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 27.631485] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 27.664864] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 27.664868] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 27.698400] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 27.698405] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 27.731455] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 27.731460] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 27.764928] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 27.764933] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 27.798369] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 27.798374] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 27.831827] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 27.831832] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 27.864811] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 27.864815] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 27.898343] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 27.898348] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 28.166257] c2 482 [VIB] en=80
- <6>[ 28.166358] c2 396 [VIB] on x82
- <6>[ 28.168185] c0 448 [TP]:[NS]: IM:2, CIDIM:1, Freq:2, NS:1
- <6>[ 28.191990] c3 482 [cap] fb_notifier_callback, event = 1
- <6>[ 28.191995] c3 482 [TP]:fb_notifier_callback, event 1
- <6>[ 28.246311] c2 396 [VIB] off
- <6>[ 28.257214] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:62
- <6>[ 28.257238] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
- <6>[ 28.257255] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:62
- <6>[ 28.257270] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
- <6>[ 28.257285] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:62
- <6>[ 28.257299] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
- <6>[ 28.257314] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:62
- <6>[ 28.257327] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
- <6>[ 28.314704] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 28.314708] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 28.857605] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:45
- <6>[ 28.857633] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
- <6>[ 28.857651] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:45
- <6>[ 28.857667] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
- <6>[ 28.857683] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:45
- <6>[ 28.857699] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
- <6>[ 28.857715] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:45
- <6>[ 28.857730] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
- <6>[ 29.586830] c0 490 hw_vsync_handler: count=0
- <6>[ 29.586928] c0 490 hw_vsync_handler: count=1
- <6>[ 29.600169] c0 0 hw_vsync_handler: count=2
- <6>[ 30.756549] c0 482 [VIB] en=80
- <6>[ 30.757110] c0 490 [VIB] on x82
- <6>[ 30.822507] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 30.822511] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 30.836654] c0 490 [VIB] off
- <6>[ 30.860263] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 30.860267] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 34.613509] c0 490 hw_vsync_handler: count=0
- <6>[ 34.613610] c0 490 hw_vsync_handler: count=1
- <6>[ 34.624004] c0 0 hw_vsync_handler: count=2
- <6>[ 36.133705] c2 482 [VIB] en=80
- <6>[ 36.133858] c2 396 [VIB] on x82
- <6>[ 36.199433] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 36.199437] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 36.213777] c2 396 [VIB] off
- <3>[ 36.640110] c1 360 [BATT] chg_full_check_worker: vol:4378, curr=-106, is_full_count=1, is_full=0 at 36640116042 (1971-01-11 21:39:14.588010911 UTC)
- <6>[ 39.626831] c0 490 hw_vsync_handler: count=0
- <6>[ 39.626929] c0 490 hw_vsync_handler: count=1
- <6>[ 39.631237] c0 0 hw_vsync_handler: count=2
- <6>[ 40.223132] c0 482 [VIB] en=80
- <6>[ 40.233516] c0 490 [VIB] on x82
- <6>[ 40.298307] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 40.298311] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 40.303210] c0 490 [VIB] off
- <6>[ 40.381058] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 40.381063] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 44.640187] c0 490 hw_vsync_handler: count=0
- <6>[ 44.640282] c0 490 hw_vsync_handler: count=1
- <6>[ 44.654995] c0 0 hw_vsync_handler: count=2
- <3>[ 46.666752] c1 360 [BATT] chg_full_check_worker: vol:4378, curr=-106, is_full_count=2, is_full=0 at 46666761260 (1971-01-11 21:39:24.614652639 UTC)
- <6>[ 49.667096] c0 490 hw_vsync_handler: count=0
- <6>[ 49.667192] c0 490 hw_vsync_handler: count=1
- <6>[ 49.678287] c0 0 hw_vsync_handler: count=2
- <6>[ 50.195982] c2 482 [VIB] en=80
- <6>[ 50.196131] c2 396 [VIB] on x82
- <6>[ 50.276055] c2 396 [VIB] off
- <6>[ 51.268043] c2 482 [VIB] en=80
- <6>[ 51.268132] c2 396 [VIB] on x82
- <6>[ 51.307543] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 51.307547] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 51.348090] c2 396 [VIB] off
- <6>[ 52.297888] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 52.297891] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 52.350172] c3 482 [cap] fb_notifier_callback, event = 1
- <6>[ 52.350176] c3 482 [TP]:fb_notifier_callback, event 1
- <6>[ 52.381152] c3 482 [cap] fb_notifier_callback, event = 1
- <6>[ 52.381156] c3 482 [TP]:fb_notifier_callback, event 1
- <6>[ 52.414552] c3 482 [cap] fb_notifier_callback, event = 1
- <6>[ 52.414556] c3 482 [TP]:fb_notifier_callback, event 1
- <6>[ 52.447755] c3 482 [cap] fb_notifier_callback, event = 1
- <6>[ 52.447760] c3 482 [TP]:fb_notifier_callback, event 1
- <6>[ 52.457221] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:60
- <6>[ 52.457244] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
- <6>[ 52.457261] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:60
- <6>[ 52.457276] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
- <6>[ 52.457292] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:60
- <6>[ 52.457305] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
- <6>[ 52.457320] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:60
- <6>[ 52.457333] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
- <6>[ 52.483697] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 52.483701] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 52.517405] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 52.517410] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 52.551239] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 52.551243] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 52.557232] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1593600. Temp:48
- <6>[ 52.557253] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
- <6>[ 52.557270] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1593600. Temp:48
- <6>[ 52.557285] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
- <6>[ 52.557300] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 2150400. Temp:48
- <6>[ 52.557315] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
- <6>[ 52.557329] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 2150400. Temp:48
- <6>[ 52.557343] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
- <6>[ 52.582703] c2 482 [cap] fb_notifier_callback, event = 1
- <6>[ 52.582708] c2 482 [TP]:fb_notifier_callback, event 1
- <6>[ 52.616660] c3 482 [cap] fb_notifier_callback, event = 1
- <6>[ 52.616664] c3 482 [TP]:fb_notifier_callback, event 1
- <6>[ 52.649107] c3 482 [cap] fb_notifier_callback, event = 1
- <6>[ 52.649111] c3 482 [TP]:fb_notifier_callback, event 1
- <6>[ 52.657321] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU0 max frequency to 1228800. Temp:61
- <6>[ 52.657369] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu0 min to 729600
- <6>[ 52.657387] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU1 max frequency to 1228800. Temp:61
- <6>[ 52.657402] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu1 min to 729600
- <6>[ 52.657417] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU2 max frequency to 1824000. Temp:61
- <6>[ 52.657431] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu2 min to 729600
- <6>[ 52.657446] c0 490 msm_thermal:do_cluster_freq_ctrl Limiting CPU3 max frequency to 1824000. Temp:61
- <6>[ 52.657459] c0 490 msm_thermal:do_cluster_freq_ctrl Set _cpu3 min to 729600
- <6>[ 52.686059] c3 482 [cap] fb_notifier_callback, event = 1
- <6>[ 52.686064] c3 482 [TP]:fb_notifier_callback, event 1
- <6>[ 52.718610] c3 482 [cap] fb_notifier_callback, event = 1
- <6>[ 52.718615] c3 482 [TP]:fb_notifier_callback, event 1
- <6>[ 52.753143] c3 482 [cap] fb_notifier_callback, event = 1
- <6>[ 52.753148] c3 482 [TP]:fb_notifier_callback, event 1
- <6>[ 52.786348] c3 482 [cap] fb_notifier_callback, event = 1
- <6>[ 52.786353] c3 482 [TP]:fb_notifier_callback, event 1
- <6>[ 52.819910] c3 482 [cap] fb_notifier_callback, event = 1
- <6>[ 52.819915] c3 482 [TP]:fb_notifier_callback, event 1
- <6>[ 52.853039] c3 482 [cap] fb_notifier_callback, event = 1
- <6>[ 52.853043] c3 482 [TP]:fb_notifier_callback, event 1
- <6>[ 52.886455] c3 482 [cap] fb_notifier_callback, event = 1
- <6>[ 52.886459] c3 482 [TP]:fb_notifier_callback, event 1
- <6>[ 52.919759] c3 482 [cap] fb_notifier_callback, event = 1
- <6>[ 52.919763] c3 482 [TP]:fb_notifier_callback, event 1
- <6>[ 52.953105] c3 482 [cap] fb_notifier_callback, event = 1
- <6>[ 52.953110] c3 482 [TP]:fb_notifier_callback, event 1
- <6>[ 52.953969] c3 482 [VIB] en=80
- <6>[ 52.954080] c3 520 [VIB] on x82
- <5>[ 52.954926] c3 482 audit: type=1400 audit(32477970.900:197): avc: denied { create } for pid=482 comm="recovery" name="recovery.log" scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
- <5>[ 52.955062] c3 482 audit: type=1400 audit(32477970.900:198): avc: denied { write open } for pid=482 comm="recovery" path="/data/media/recovery.log" dev="mmcblk0p64" ino=1212420 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
- <5>[ 52.955134] c3 482 audit: type=1400 audit(32477970.900:199): avc: denied { getattr } for pid=482 comm="recovery" path="/data/media/recovery.log" dev="mmcblk0p64" ino=1212420 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
- <5>[ 52.955774] c3 482 audit: type=1400 audit(32477970.900:200): avc: denied { setattr } for pid=482 comm="recovery" name="recovery.log" dev="mmcblk0p64" ino=1212420 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
- <5>[ 52.955819] c3 482 audit: type=1400 audit(32477970.900:201): avc: denied { relabelfrom } for pid=482 comm="recovery" name="recovery.log" dev="mmcblk0p64" ino=1212420 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
- <5>[ 52.955844] c3 482 audit: type=1400 audit(32477970.900:202): avc: denied { relabelto } for pid=482 comm="recovery" name="recovery.log" dev="mmcblk0p64" ino=1212420 scontext=u:r:recovery:s0 tcontext=u:object_r:media_rw_data_file:s0 tclass=file permissive=1
Add Comment
Please, Sign In to add comment