API tools faq
paste
Guest User

Untitled

a guest
Dec 30th, 2018
1,511
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 112.81 KB | None | 0 0
raw download clone embed print report
  1. GXL:BL1:9ac50e:bb16dc;FEAT:BDFD71BC:0;POC:3;RCY:0;EMMC:0;READ:0;0.0;0.0;CHK:0;
  2. TE: 112230
  3.  
  4. BL2 Built : 14:26:56, Dec 14 2017. gxl g56303a2 - xiaobo.gu@droid12
  5.  
  6. set vcck to 1120 mv
  7. set vddee to 1000 mv
  8. Board ID = 5
  9. CPU clk: 1200MHz
  10. DQS-corr enabled
  11. DDR scramble enabled
  12. DDR3 chl: Rank0+1 @ 912MHz
  13. bist_test rank: 0 18 01 30 2b 16 41 17 00 2f 2e 1a 43 19 04 2f 2c 1a 3f 17 00 2f 2d 17 43 702 rank: 1 15 01 2a 2a 16 3f 14 00 29 2f 1b 43 14 02 26 2c 18 41 15 00 2a 2d 17 44 702 - PASS
  14.  
  15. Rank0: 1024MB(auto)-2T-13
  16.  
  17. Rank1: 1024MB(auto)-2T-13
  18. AddrBus test pass!
  19. -s
  20. emmc switch 3 ok
  21. Authentication key not yet programmed
  22. emmc_rpmb_key_is_programmed: error 0x00000007
  23. emmc switch 0 ok
  24. Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000
  25. aml log : R1024 check pass!
  26. New fip structure!
  27. Load bl30 from eMMC, src: 0x00010200, des: 0x01700000, size: 0x0000d600
  28. aml log : R1024 check pass!
  29. Load bl31 from eMMC, src: 0x00020200, des: 0x01700000, size: 0x0002c600
  30. aml log : R1024 check pass!
  31. Load bl32 from eMMC, src: 0x00050200, des: 0x01700000, size: 0x00033e00
  32. aml log : R1024 check pass!
  33. Load bl33 from eMMC, src: 0x00084200, des: 0x01700000, size: 0x00053c00
  34. aml log : R1024 check pass!
  35. NOTICE: BL3-1: v1.0(release):b60a036
  36. NOTICE: BL3-1: Built : 17:03:54, Apr 10 2018
  37. [BL31]: GXL CPU setup!
  38. NOTICE: BL3-1: GXL secure boot!
  39. NOTICE: BL3-1: BL33 decompress pass
  40. mpu_config_enable:ok
  41. [Image: gxl_v1.1.3255-1a77b01 2017-09-15 16:58:02 xiaobo.gu@droid12]
  42. OPS=0x84
  43. 31 ab f1 38 a4 4e b b1 c6 9f 14 93 [1.440554 Inits done]
  44. secure task start!
  45. high task start!
  46. low task start!
  47. INFO: BL3-2: ATOS-V2.4-69-gc1e2fb5 #1 Wed Jan 31 06:57:06 UTC 2018 arm
  48. INFO: BL3-2: Chip: GXL Rev: D (21:D - 80:2)
  49. INFO: BL3-2: crypto engine DMA
  50. INFO: BL3-2: secure time TEE
  51. INFO: BL3-2: CONFIG_DEVICE_SECURE 0xb200000e
  52.  
  53.  
  54. U-Boot 2015.01-gccdffc5-dirty (Nov 18 2018 - 10:53:49), Build: jenkins-oneday-430
  55.  
  56. DRAM: 2 GiB
  57. Relocation Offset is: 76ed6000
  58. gpio: pin gpiodv_24 (gpio 43) value is 1
  59. gpio: pin gpioh_3 (gpio 52) value is 1
  60. register usb cfg[0][1] = 0000000077f5f388
  61. MMC: aml_priv->desc_buf = 0x0000000073ed6b40
  62. aml_priv->desc_buf = 0x0000000073ed8e60
  63. SDIO Port B: 0, SDIO Port C: 1
  64. emmc/sd response timeout, cmd8, status=0x3ff2800
  65. emmc/sd response timeout, cmd55, status=0x3ff2800
  66. init_part() 293: PART_TYPE_AML
  67. [mmc_init] mmc init success
  68. aml log : R1024 check pass!
  69. start dts,buffer=0000000073edb690,dt_addr=0000000073edb690
  70. get_partition_from_dts() 103: ret 0
  71. parts: 14
  72. 00: logo 0000000000800000 1
  73. 01: recovery 0000000001800000 1
  74. 02: misc 0000000000800000 1
  75. 03: dto 0000000000800000 1
  76. 04: cri_data 0000000000800000 2
  77. 05: param 0000000001000000 2
  78. 06: boot 0000000001000000 1
  79. 07: rsv 0000000001000000 1
  80. 08: tee 0000000002000000 1
  81. 09: vendor 0000000006400000 1
  82. 10: oem 0000000012c00000 1
  83. 11: system 0000000046000000 1
  84. 12: cache 0000000010000000 2
  85. 13: data ffffffffffffffff 4
  86. init_part() 293: PART_TYPE_AML
  87. eMMC/TSD partition table have been checked OK!
  88. check pattern success
  89. mmc env offset: 0x17400000
  90. In: serial
  91. Out: serial
  92. Err: serial
  93. reboot_mode=cold_boot
  94. [store]To run cmd[emmc dtb_read 0x1000000 0x40000]
  95. _verify_dtb_checksum()-2610: calc 723413d2, store 723413d2
  96. _verify_dtb_checksum()-2610: calc 723413d2, store 723413d2
  97. dtb_read()-2827: total valid 2
  98. update_old_dtb()-2808: do nothing
  99. aml log : R1024 check pass!
  100. vpu: clk_level in dts: 7
  101. vpu: set clk: 666667000Hz, readback: 666660000Hz(0x300)
  102. vpu: vpu_clk_gate_init_off finish
  103. hpd_state=0
  104. cvbs performance type = 6, table = 0
  105. amlkey_init() enter!
  106. [EFUSE_MSG]keynum is 4
  107. [BL31]: tee size: 0
  108. [BL31]: tee size: 0
  109. [BL31]: tee size: 0
  110. [BL31]: tee size: 0
  111. [KM]Error:f[keymanage_dts_get_key_device]L85:carrier key name is not exist
  112. [KM]Error:f[_get_km_ops_by_name]L231:key carrier not know device 4
  113. [KM]Error:f[key_manage_query_exist]L546:There isn't dts cfg for key[carrier]
  114. [KM]Error:f[key_manage_query_size]L503:Fail in query key exist
  115. Start read misc partition datas!
  116. info->magic =
  117. info->version_major = 1
  118. info->version_minor = 0
  119. info->slots[0].priority = 15
  120. info->slots[0].tries_remaining = 7
  121. info->slots[0].successful_boot = 0
  122. info->slots[1].priority = 14
  123. info->slots[1].tries_remaining = 7
  124. info->slots[1].successful_boot = 0
  125. info->crc32 = -1075449479
  126. active slot = 0
  127. wipe_data=successful
  128. wipe_cache=successful
  129. upgrade_step=2
  130. [OSD]load fb addr from dts
  131. [OSD]fb_addr for logo: 0x7f800000
  132. [OSD]load fb addr from dts
  133. [OSD]fb_addr for logo: 0x7f800000
  134. [CANVAS]canvas init
  135. [CANVAS]addr=0x7f800000 width=5760, height=2160
  136. pull down bt_reset
  137. pull up bt_reset
  138. set hci reset
  139. 04 0e 04 01 03 0c 00
  140. set scan parameters
  141. 04 0e 04 01 0b 20 00
  142. set scan enable
  143. 04 0e 04 01 0c 20 00
  144. 04 3e 2b 02 01 00 01 9d 53 be 6c e1 67 1f 02 01 02 03 03 9f fe 17 16 9f fe 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 cf
  145. 04 3e 16 02 01 04 01 9d 53 be 6c e1 67 0a 09 ff e0 00 01 43 a5 4c 5a 24 cd
  146. 04 3e 21 02 01 00 01 88 0a 0b 55 03 54 15 02 01 02 11 07 fc 9d d0 b3 cb 84 e0 84 06 42 f3 f7 e1 e0 bf cb b8
  147. 04 3e 0c 02 01 04 01 88 0a 0b 55 03 54 00 b8
  148. pull down bt_enable
  149. Hit Enter or space or Ctrl+C key to stop autoboot -- : 0
  150. [imgread]szTimeStamp[2018111811300118]
  151. [imgread]secureKernelImgSz=0xa96800
  152. aml log : R-1024 check pass!
  153. aml log : R1024 check pass!
  154. aml log : R1024 check pass!
  155. aml log : R1024 check pass!
  156. ee_gate_off ...
  157. ## Booting Android Image at 0x01080000 ...
  158. reloc_addr =73f5b8e0
  159. copy done
  160. Kernel command line: buildvariant=user
  161. load dtb from 0x1000000 ......
  162. Uncompressing Kernel Image ... OK
  163. kernel loaded at 0x01080000, end = 0x02604a00
  164. Loading Ramdisk to 73cad000, end 73ec3800 ... OK
  165. Loading Device Tree to 000000001fff1000, end 000000001ffff000 ... OK
  166.  
  167. Starting kernel ...
  168.  
  169. uboot time: 3849048 us
  170. [ 0.000000@0] Booting Linux on physical CPU 0x0
  171. [ 0.000000@0] Linux version 4.9.61-g92463ee ([email protected]) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #1 SMP PREEMPT Sun Nov 18 10:56:38 CST 2018
  172. [ 0.000000@0] Boot CPU: AArch64 Processor [410fd034]
  173. [ 0.000000@0] earlycon: aml_uart0 at MMIO 0x00000000c81004c0 (options '')
  174. [ 0.000000@0] bootconsole [aml_uart0] enabled
  175. [ 0.000000@0] efi: Getting EFI parameters from FDT:
  176. [ 0.000000@0] efi: UEFI not found.
  177. [ 0.000000@0] OF: reserved mem: __reserved_mem_alloc_size, start:5000000, end:7400000, len:2400000
  178. [ 0.000000@0] Reserved memory: created CMA memory pool at 0x0000000005000000, size 36 MiB
  179. [ 0.000000@0] OF: reserved mem: initialized node linux,secmon, compatible id shared-dma-pool
  180. [ 0.000000@0] OF: reserved mem: __reserved_mem_alloc_size, start:7f800000, end:80000000, len:800000
  181. [ 0.000000@0] Reserved memory: created CMA memory pool at 0x000000007f800000, size 8 MiB
  182. [ 0.000000@0] OF: reserved mem: initialized node linux,meson-fb, compatible id shared-dma-pool
  183. [ 0.000000@0] Reserved memory: created CMA memory pool at 0x000000007d800000, size 32 MiB
  184. [ 0.000000@0] OF: reserved mem: initialized node linux,di_cma, compatible id shared-dma-pool
  185. [ 0.000000@0] Reserved memory: created CMA memory pool at 0x0000000075c00000, size 124 MiB
  186. [ 0.000000@0] OF: reserved mem: initialized node linux,ion-dev, compatible id shared-dma-pool
  187. [ 0.000000@0] Reserved memory: created CMA memory pool at 0x0000000074c00000, size 16 MiB
  188. [ 0.000000@0] OF: reserved mem: initialized node linux,vdin1_cma, compatible id shared-dma-pool
  189. [ 0.000000@0] Reserved memory: created DMA memory pool at 0x0000000074c00000, size 0 MiB
  190. [ 0.000000@0] OF: reserved mem: initialized node linux,ppmgr, compatible id shared-dma-pool
  191. [ 0.000000@0] Reserved memory: created CMA memory pool at 0x0000000060800000, size 308 MiB
  192. [ 0.000000@0] OF: reserved mem: initialized node linux,codec_mm_cma, compatible id shared-dma-pool
  193. [ 0.000000@0] Reserved memory: unable to setup CMA region
  194. [ 0.000000@0] OF: reserved mem: initialized node linux,codec_mm_reserved, compatible id amlogic, codec-mm-reserved
  195. [ 0.000000@0] cma: Reserved 8 MiB at 0x0000000074400000
  196. [ 0.000000@0] psci: probing for conduit method from DT.
  197. [ 0.000000@0] psci: PSCIv0.2 detected in firmware.
  198. [ 0.000000@0] psci: Using standard PSCI v0.2 function IDs
  199. [ 0.000000@0] psci: Trusted OS migration not required
  200. [ 0.000000@0] percpu: Embedded 23 pages/cpu @ffffffc074355000 s53528 r8192 d32488 u94208
  201. [ 0.000000@0] Detected VIPT I-cache on CPU0
  202. [ 0.000000@0] CPU features: enabling workaround for ARM erratum 845719
  203. [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515844
  204. [ 0.000000@0] Kernel command line: rootfstype=ramfs init=/init console=ttyS0,115200 no_console_suspend earlycon=aml_uart,0xc81004c0 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=enforcing logo=osd1,loaded,0x3d800000,576cvbs maxcpus=4 vout=576cvbs,enable hdmimode=1080p60hz cvbsmode=576cvbs hdmitx= cvbsdrv=0 androidboot.firstboot=0 jtag=apao androidboot.veritymode=enforcing androidboot.hardware=amlogic androidboot.btmacaddr=c8:28:32:2d:a2:36 androidboot.wifimac=c8:28:32:2b:0a:26 androidboot.wificountrycode=US androidboot.bootloader=oneday androidboot.serialno=18554280002242 androidboot.rpmb_state=0 androidboot.verifiedbootstate=orange androidboot.slot_suffix=_a buildvariant=user
  205. [ 0.000000@0] fb: osd1
  206. [ 0.000000@0] fb: loaded
  207. [ 0.000000@0] fb: 0x3d800000
  208. [ 0.000000@0] fb: 576cvbs
  209. [ 0.000000@0] vout: 576cvbs
  210. [ 0.000000@0] vout: enable: 1
  211. [ 0.000000@0] vout: get hdmimode: 1080p60hz
  212. [ 0.000000@0] vout: get cvbsmode: 576cvbs
  213. [ 0.000000@0] cvbs_out: cvbs performance line = 0
  214. [ 0.000000@0] jtag: jtag select apao
  215. [ 0.000000@0] (NULL device *): [mac_addr_set] try to wifi mac from emmc key!
  216. [ 0.000000@0] (NULL device *): [mac_addr_set] uboot setup mac-addr: c8:28:32:2b:a:26
  217. [ 0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
  218. [ 0.000000@0] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  219. [ 0.000000@0] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  220. [ 0.000000@0] Memory: 1488104K/2096128K available (11644K kernel code, 1426K rwdata, 4472K rodata, 4416K init, 1434K bss, 63256K reserved, 544768K cma-reserved)
  221. [ 0.000000@0] Virtual kernel memory layout:
  222. [ 0.000000@0] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
  223. [ 0.000000@0] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
  224. [ 0.000000@0] .text : 0xffffff8009080000 - 0xffffff8009be0000 ( 11648 KB)
  225. [ 0.000000@0] .rodata : 0xffffff8009be0000 - 0xffffff800a050000 ( 4544 KB)
  226. [ 0.000000@0] .init : 0xffffff800a050000 - 0xffffff800a4a0000 ( 4416 KB)
  227. [ 0.000000@0] .data : 0xffffff800a4a0000 - 0xffffff800a604a00 ( 1427 KB)
  228. [ 0.000000@0] .bss : 0xffffff800a604a00 - 0xffffff800a76b324 ( 1435 KB)
  229. [ 0.000000@0] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
  230. [ 0.000000@0] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
  231. [ 0.000000@0] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
  232. [ 0.000000@0] 0xffffffbf00004000 - 0xffffffbf02000000 ( 31 MB actual)
  233. [ 0.000000@0] memory : 0xffffffc000100000 - 0xffffffc080000000 ( 2047 MB)
  234. [ 0.000000@0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  235. [ 0.000000@0] Preemptible hierarchical RCU implementation.
  236. [ 0.000000@0] Build-time adjustment of leaf fanout to 64.
  237. [ 0.000000@0] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  238. [ 0.000000@0] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
  239. [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
  240. [ 0.000000@0] amlogic_init_sdemmc: register amlogic sdemmc clk
  241. [ 0.000000@0] amlogic_init_sdemmc: register amlogic sdemmc clk
  242. [ 0.000000@0] success set parent gpu_p1_composite rate to 400000000
  243. [ 0.000000@0] amlogic_init_gpu: register meson gpu clk
  244. [ 0.000000@0] amlogic_init_media: register meson media clk
  245. [ 0.000000@0] amlogic_init_misc: register meson misc clk
  246. [ 0.000000@0] gxl_clkc_init initialization complete
  247. [ 0.000000@0] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
  248. [ 0.000000@0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  249. [ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  250. [ 0.008255@0] meson_bc_timer: mclk->mux_reg =ffffff8008006990,mclk->reg =ffffff8008008994
  251. [ 0.016902@0] Console: colour dummy device 80x25
  252. [ 0.021104@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  253. [ 0.031586@0] pid_max: default: 32768 minimum: 301
  254. [ 0.036460@0] Security Framework initialized
  255. [ 0.040695@0] SELinux: Initializing.
  256. [ 0.044435@0] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  257. [ 0.051285@0] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  258. [ 0.059206@0] ftrace: allocating 38256 entries in 150 pages
  259. [ 0.125674@0] sched-energy: CPU device node has no sched-energy-costs
  260. [ 0.126483@0] CPU0: update cpu_capacity 1024
  261. [ 0.130802@0] ASID allocator initialised with 65536 entries
  262. [ 0.169016@0] EFI services will not be available.
  263. [ 0.169120@0] Meson chip version = RevD (21:D - 84:0)
  264. [ 0.213483@1] Detected VIPT I-cache on CPU1
  265. [ 0.213535@1] CPU1: update cpu_capacity 1024
  266. [ 0.213538@1] CPU1: Booted secondary processor [410fd034]
  267. [ 0.245541@2] Detected VIPT I-cache on CPU2
  268. [ 0.245585@2] CPU2: update cpu_capacity 1024
  269. [ 0.245587@2] CPU2: Booted secondary processor [410fd034]
  270. [ 0.277625@3] Detected VIPT I-cache on CPU3
  271. [ 0.277667@3] CPU3: update cpu_capacity 1024
  272. [ 0.277669@3] CPU3: Booted secondary processor [410fd034]
  273. [ 0.277755@0] Brought up 4 CPUs
  274. [ 0.316978@0] SMP: Total of 4 processors activated.
  275. [ 0.321887@0] CPU features: detected feature: 32-bit EL0 Support
  276. [ 0.327965@0] CPU: All CPU(s) started at EL2
  277. [ 0.332229@0] alternatives: patching kernel code
  278. [ 0.337835@0] devtmpfs: initialized
  279. [ 0.355192@0] DMI not present or invalid.
  280. [ 0.355525@0] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  281. [ 0.363564@0] futex hash table entries: 1024 (order: 5, 131072 bytes)
  282. [ 0.382809@0] pinctrl core: initialized pinctrl subsystem
  283. [ 0.384073@0] NET: Registered protocol family 16
  284. [ 0.407301@0] cpuidle: using governor menu
  285. [ 0.407428@0] register canvas platform driver
  286. [ 0.410165@0] register rdma platform driver
  287. [ 0.414386@0] aml_vdac_init: module init
  288. [ 0.420020@0] vdso: 2 pages (1 code @ ffffff8009be7000, 1 data @ ffffff800a4a5000)
  289. [ 0.425905@0] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  290. [ 0.434574@0] DMA: preallocated 256 KiB pool for atomic allocations
  291. [ 0.439276@0] codec_mm_module_init
  292. [ 0.442626@0] media_configs_system_init
  293. [ 0.446987@0] pstore: using zlib compression
  294. [ 0.451284@0] console [pstore-1] enabled
  295. [ 0.454905@0] pstore: Registered ramoops as persistent store backend
  296. [ 0.461071@0] ramoops: attached 0x100000@0x7400000, ecc: 0/0
  297. [ 0.469146@0] aml_iomap: amlogic iomap probe done
  298. domain-0 init dvfs: 4
  299. [ 0.479697@0] vpu: driver version: v02
  300. [ 0.479748@0] vpu: load vpu_clk: 666667000Hz(7)
  301. [ 0.482434@0] vpu: vpu_clktree_init
  302. [ 0.485932@0] vpu: vpu_probe OK
  303. [ 0.501288@0] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
  304. [ 0.503287@0] codec_mm codec_mm: assigned reserved memory node linux,codec_mm_cma
  305. [ 0.511111@0] canvas_probe reg=00000000c8838000,size=400
  306. [ 0.516060@0] canvas maped reg_base =ffffff800819d000
  307. [ 0.529158@0] cvbs_out: cvbsout_probe
  308. [ 0.529192@0] cvbs_out: chrdev devno 264241152 for disp
  309. [ 0.532413@0] vout: vout_register_server
  310. [ 0.536373@0] cvbs_out: register cvbs module server ok
  311. [ 0.541738@0] cvbs_out: create cdev cvbs
  312. [ 0.545453@0] cvbs_out: cvbsout_probe OK
  313. [ 0.552000@0] rdma_probe
  314. [ 0.552315@0] rdma_register, rdma_table_addr ffffff80081b3000 rdma_table_addr_phy 74440000 reg_buf ffffffc05e2b8000
  315. [ 0.562457@0] rdma_register success, handle 1 table_size 32768
  316. [ 0.568297@0] set_rdma_handle video rdma handle = 1.
  317. [ 0.863597@0] vgaarb: loaded
  318. [ 0.863969@0] SCSI subsystem initialized
  319. [ 0.865045@0] usbcore: registered new interface driver usbfs
  320. [ 0.870544@0] usbcore: registered new interface driver hub
  321. [ 0.876077@0] usbcore: registered new device driver usb
  322. [ 0.881402@0] Linux video capture interface: v2.00
  323. [ 0.886122@0] pps_core: LinuxPPS API ver. 1 registered
  324. [ 0.891258@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  325. [ 0.900595@0] PTP clock support registered
  326. [ 0.905038@0] dmi: Firmware registration failed.
  327. [ 0.909863@0] fb: osd_init_module
  328. [ 0.912859@0] fb: viu vsync irq: 152
  329. [ 0.916593@0] osd_rdma: osd_rdma_init: rdma_table p=0x74448000,op=0x74448000 , v=0xffffff80081bc000
  330. [ 0.925361@0] rdma_register, rdma_table_addr ffffff80081be000 rdma_table_addr_phy 74449000 reg_buf ffffffc05e229000
  331. [ 0.935827@0] rdma_register success, handle 2 table_size 4096
  332. [ 0.941590@0] osd_rdma: osd_rdma_init:osd reset rdma handle = 2.
  333. [ 0.947657@0] rdma_register, rdma_table_addr ffffff80081d1000 rdma_table_addr_phy 7444a000 reg_buf ffffffc05e22d000
  334. [ 0.958127@0] rdma_register success, handle 3 table_size 4096
  335. [ 0.963905@0] osd_rdma: osd_rdma_init:osd rdma handle = 3.
  336. [ 0.969478@0] meson-fb meson-fb: assigned reserved memory node linux,meson-fb
  337. [ 0.976590@0] fb: reserved memory base:7f800000, size:800000
  338. [ 0.983855@0] vout: error: invalid vinfo. current vmode is not supported
  339. [ 0.989068@0] fb: init fbdev bpp is:32
  340. [ 0.993565@0] fb: set osd0 reverse as NONE
  341. [ 1.004379@0] fb: osd probe OK
  342. [ 1.004883@0] hdmitx: system: amhdmitx_init
  343. [ 1.006011@0] hdmitx: system: Ver: 20170622
  344. [ 1.010197@0] hdmitx: system: amhdmitx_probe
  345. [ 1.014844@0] vout: vout_register_server
  346. [ 1.018402@0] hdmitx: hdmi_init_chip_type: 0
  347. [ 1.022926@0] hdmitx: system: not find match pwr-ctl
  348. [ 1.027755@0] hdmitx hpd irq = 161
  349. [ 1.031873@0] hdmitx20: Mapped PHY: 0xc1100000
  350. [ 1.035564@0] hdmitx20: Mapped PHY: 0xc8834400
  351. [ 1.040032@0] hdmitx20: Mapped PHY: 0xd0100000
  352. [ 1.044543@0] hdmitx20: Mapped PHY: 0xc8100000
  353. [ 1.048949@0] hdmitx20: Mapped PHY: 0xc883c000
  354. [ 1.053409@0] hdmitx20: Mapped PHY: 0xc1104400
  355. [ 1.057870@0] hdmitx20: Mapped PHY: 0xc883a000
  356. [ 1.062332@0] hdmitx20: Mapped PHY: 0xda83a000
  357. [ 1.066819@0] hdmitx20: Mapped PHY: 0xd0044000
  358. [ 1.071495@0] avmute set to 1
  359. [ 1.074226@0] hdmitx: attr default
  360. [ 1.078143@0] cvbs_out: mode is 1,sync_duration_den=1,sync_duration_num=50
  361. [ 1.084621@0] cvbs_out: already display in uboot
  362. [ 1.089194@0] vout: init mode 576cvbs set ok
  363. [ 1.093707@0] vout: vout_fops_create OK
  364. [ 1.097323@0] vout: create vout attribute OK
  365. [ 1.101763@0] vout: aml_tvout_mode_monitor
  366. [ 1.105798@0] vout: aml_vout_probe OK
  367. [ 1.109922@0] Advanced Linux Sound Architecture Driver Initialized.
  368. [ 1.116322@0] Bluetooth: Core ver 2.22
  369. [ 1.119517@0] NET: Registered protocol family 31
  370. [ 1.124130@0] Bluetooth: HCI device and connection manager initialized
  371. [ 1.130727@0] Bluetooth: HCI socket layer initialized
  372. [ 1.135750@0] Bluetooth: L2CAP socket layer initialized
  373. [ 1.141036@0] Bluetooth: SCO socket layer initialized
  374. [ 1.146577@1] NetLabel: Initializing
  375. [ 1.149683@1] NetLabel: domain hash size = 128
  376. [ 1.154207@1] NetLabel: protocols = UNLABELED CIPSOv4
  377. [ 1.159438@1] NetLabel: unlabeled traffic allowed by default
  378. [ 1.167291@1] clocksource: Switched to clocksource arch_sys_counter
  379. [ 1.251167@1] VFS: Disk quotas dquot_6.6.0
  380. [ 1.251321@1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  381. [ 1.267739@1] jtag: module init
  382. [ 1.267992@1] jtag: select is configured apao
  383. [ 1.269602@1] jtag: select is replaced by boot param
  384. [ 1.274691@1] jtag: request gpio 33 for apao
  385. [ 1.279000@1] jtag: request gpio 34 for apao
  386. [ 1.283367@1] jtag: request gpio 35 for apao
  387. [ 1.287741@1] jtag: request gpio 36 for apao
  388. [ 1.292104@1] jtag: set state 2
  389. efuse_pw_en: 0x7
  390. WARNING! efuse bits is disabled
  391. Enable A53 JTAG to AO
  392. [ 1.307672@0] jtag: module probed ok
  393. [ 1.308066@0] NET: Registered protocol family 2
  394. [ 1.310674@0] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  395. [ 1.317712@0] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  396. [ 1.324678@0] TCP: Hash tables configured (established 16384 bind 16384)
  397. [ 1.331235@0] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  398. [ 1.337405@0] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  399. [ 1.344250@0] NET: Registered protocol family 1
  400. [ 1.349833@0] wifi: power_on_pin_OD = 0;
  401. [ 1.352529@0] aml_wifi wifi: [wifi_dev_probe] no power_on_pin2
  402. [ 1.358443@0] aml_wifi wifi: [pwm_double_channel_conf_dt] wifi pwm dt ok
  403. [ 1.365158@0] aml_wifi wifi: [pwm_double_channel_conf] wifi pwm conf ok
  404. [ 1.371760@0] aml_wifi wifi: [wifi_dev_probe] dhd_static_buf setup
  405. [ 1.378244@0] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem prealloc ok
  406. [ 1.384911@0] aml_wifi wifi: [wifi_dev_probe] interrupt_pin=97
  407. [ 1.390739@0] aml_wifi wifi: [wifi_dev_probe] irq_num=0, irq_trigger_type=1
  408. [ 1.397738@0] aml_wifi wifi: [wifi_dev_probe] power_on_pin=96
  409. [ 1.403511@0] aml_wifi wifi: [wifi_dev_probe] clock_32k_pin=0
  410. [ 1.409553@0] aml_wifi wifi: [wifi_setup_dt] wifi_setup_dt
  411. [ 1.414847@0] aml_wifi wifi: [wifi_setup_dt] irq num is:(132)
  412. [ 1.420581@0] aml_wifi wifi: [wifi_setup_dt] interrupt_pin(97)
  413. [ 1.426498@0] aml_wifi wifi: [wifi_setup_dt] power_on_pin(96)
  414. [ 1.432658@0] Unpacking initramfs...
  415. [ 1.507555@0] Initramfs unpacking failed: junk in compressed archive
  416. [ 1.509302@0] Freeing initrd memory: 2136K
  417. [ 1.514355@0] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  418. [ 1.521804@0] audit: initializing netlink subsys (disabled)
  419. [ 1.526107@0] audit: type=2000 audit(1.284:1): initialized
  420. [ 1.532299@0] workingset: timestamp_bits=62 max_order=19 bucket_order=0
  421. [ 1.548638@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  422. [ 1.549294@0] exFAT: Version 1.2.9
  423. [ 1.553206@1] Registering sdcardfs 0.1
  424. [ 1.556655@1] ntfs: driver 2.1.32 [Flags: R/O].
  425. [ 1.561264@1] fuse init (API version 7.26)
  426. [ 1.569237@1] NET: Registered protocol family 38
  427. [ 1.569490@1] Key type asymmetric registered
  428. [ 1.574045@1] Asymmetric key parser 'x509' registered
  429. [ 1.579114@1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 243)
  430. [ 1.586490@1] io scheduler noop registered (default)
  431. [ 1.591473@1] io scheduler deadline registered
  432. [ 1.596133@1] io scheduler cfq registered
  433. [ 1.610213@1] Unable to detect cache hierarchy from DT for CPU 0
  434. [ 1.617106@3] loop: module loaded
  435. [ 1.617952@3] zram: Added device: zram0
  436. [ 1.619756@3] libphy: Fixed MDIO Bus: probed
  437. [ 1.623241@3] tun: Universal TUN/TAP device driver, 1.6
  438. [ 1.628177@3] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  439. [ 1.636268@3] PPP generic driver version 2.4.2
  440. [ 1.639221@3] PPP BSD Compression module registered
  441. [ 1.643959@3] PPP Deflate Compression module registered
  442. [ 1.649182@3] PPP MPPE Compression module registered
  443. [ 1.654167@3] NET: Registered protocol family 24
  444. [ 1.658927@3] usbcore: registered new interface driver catc
  445. [ 1.664520@3] usbcore: registered new interface driver kaweth
  446. [ 1.670171@3] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  447. [ 1.677842@3] usbcore: registered new interface driver pegasus
  448. [ 1.683705@3] usbcore: registered new interface driver rtl8150
  449. [ 1.689573@3] usbcore: registered new interface driver r8152
  450. [ 1.695195@3] hso: /home/work/data/jenkins/workspace/oneday/common/drivers/net/usb/hso.c: Option Wireless
  451. [ 1.704906@3] usbcore: registered new interface driver hso
  452. [ 1.710395@3] usbcore: registered new interface driver asix
  453. [ 1.716000@3] usbcore: registered new interface driver ax88179_178a
  454. [ 1.722295@3] usbcore: registered new interface driver cdc_ether
  455. [ 1.728331@3] usbcore: registered new interface driver cdc_eem
  456. [ 1.734203@3] usbcore: registered new interface driver dm9601
  457. [ 1.739968@3] usbcore: registered new interface driver sr9700
  458. [ 1.745747@3] usbcore: registered new interface driver CoreChips
  459. [ 1.751792@3] usbcore: registered new interface driver smsc75xx
  460. [ 1.757745@3] usbcore: registered new interface driver smsc95xx
  461. [ 1.763689@3] usbcore: registered new interface driver gl620a
  462. [ 1.769460@3] usbcore: registered new interface driver net1080
  463. [ 1.775328@3] usbcore: registered new interface driver plusb
  464. [ 1.781004@3] usbcore: registered new interface driver rndis_host
  465. [ 1.787131@3] usbcore: registered new interface driver cdc_subset
  466. [ 1.793266@3] usbcore: registered new interface driver zaurus
  467. [ 1.799035@3] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  468. [ 1.806655@3] usbcore: registered new interface driver int51x1
  469. [ 1.812511@3] usbcore: registered new interface driver cdc_phonet
  470. [ 1.818629@3] usbcore: registered new interface driver kalmia
  471. [ 1.824419@3] usbcore: registered new interface driver ipheth
  472. [ 1.830182@3] usbcore: registered new interface driver sierra_net
  473. [ 1.836316@3] usbcore: registered new interface driver cx82310_eth
  474. [ 1.842525@3] usbcore: registered new interface driver cdc_ncm
  475. [ 1.848393@3] usbcore: registered new interface driver huawei_cdc_ncm
  476. [ 1.854869@3] usbcore: registered new interface driver lg-vl600
  477. [ 1.860814@3] usbcore: registered new interface driver qmi_wwan
  478. [ 1.866764@3] usbcore: registered new interface driver cdc_mbim
  479. [ 1.873932@3] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  480. [ 1.879390@3] ehci-pci: EHCI PCI platform driver
  481. [ 1.884112@3] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  482. [ 1.890429@3] ohci-pci: OHCI PCI platform driver
  483. [ 1.895695@3] usbcore: registered new interface driver cdc_acm
  484. [ 1.900909@3] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  485. [ 1.909241@3] usbcore: registered new interface driver cdc_wdm
  486. [ 1.915078@3] usbcore: registered new interface driver usb-storage
  487. [ 1.921350@3] usbcore: registered new interface driver usbserial
  488. [ 1.927331@3] usbcore: registered new interface driver cp210x
  489. [ 1.933062@3] usbserial: USB Serial support registered for cp210x
  490. [ 1.939213@3] usbcore: registered new interface driver pl2303
  491. [ 1.944974@3] usbserial: USB Serial support registered for pl2303
  492. [ 1.951519@1] mousedev: PS/2 mouse device common for all mice
  493. [ 1.957211@1] usbcore: registered new interface driver xpad
  494. [ 1.962606@1] i2c /dev entries driver
  495. [ 1.966237@1] usbcore: registered new interface driver uvcvideo
  496. [ 1.972056@1] USB Video Class driver (1.1.1)
  497. [ 1.976328@1] md: linear personality registered for level -1
  498. [ 1.982454@1] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: [email protected]
  499. [ 1.990886@1] Bluetooth: HCI UART driver ver 2.3
  500. [ 1.995321@1] Bluetooth: HCI UART protocol H4 registered
  501. [ 2.001665@1] cpu cpu0: bL_cpufreq_init: CPU 0 initialized
  502. [ 2.007921@1] arm_big_little: bL_cpufreq_register: Registered platform driver: scpi
  503. [ 2.015757@1] hidraw: raw HID events driver (C) Jiri Kosina
  504. [ 2.019833@1] usbcore: registered new interface driver usbhid
  505. [ 2.025248@1] usbhid: USB HID core driver
  506. [ 2.029455@1] ashmem: initialized
  507. [ 2.033185@1] c81004c0.serial: clock gate not found
  508. [ 2.037555@1] meson_uart c81004c0.serial: ==uart0 reg addr = ffffff80083034c0
  509. [ 2.044714@1] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 23, base_baud = 1500000) is a meson_uart
  510. [ 2.059700@1] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200
  511. [ 2.062270@1] console [ttyS0] enabled
  512. [ 2.062270@1] console [ttyS0] enabled
  513. [ 2.069489@1] bootconsole [aml_uart0] disabled
  514. [ 2.069489@1] bootconsole [aml_uart0] disabled
  515. [ 2.078756@1] c11084c0.serial: clock gate not found
  516. [ 2.083196@1] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff80083054c0
  517. [ 2.090245@1] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 24, base_baud = 10416666) is a meson_uart
  518. [ 2.100248@1] secmon: reserve_mem_size:0x2300000
  519. [ 2.104223@1] secmon secmon: assigned reserved memory node linux,secmon
  520. [ 2.117256@1] secmon: get page:ffffffbf00140000, 5000
  521. [ 2.117290@1] secmon: share in base: 0xffffffc0050fe000, share out base: 0xffffffc0050ff000
  522. [ 2.124968@1] secmon: phy_in_base: 0x50fe000, phy_out_base: 0x50ff000
  523. [ 2.132213@1] amlogic-new-usb2 d0078000.usb2phy: USB2 phy probe:phy_mem:0xd0078000, iomap phy_base:0xffffff8008328000
  524. [ 2.142198@1] amlogic-new-usb3 d0078080.usb3phy: This phy has no usb port
  525. [ 2.148689@1] amlogic-new-usb3 d0078080.usb3phy: USB3 phy probe:phy_mem:0xd0078080, iomap phy_base:0xffffff800832a080
  526. [ 2.160811@1] meson_reset c1104404.reset-controller: meson_reset_probe: register reset controller ok,ret: 0
  527. [ 2.169158@1] clkmsr: msr_clk_reg0=ffffff800833075c,msr_clk_reg2=ffffff8008332764
  528. [ 2.176403@1] clkmsr: clkmsr: driver init
  529. [ 2.181141@1] meson-remote: Driver init
  530. [ 2.184163@1] meson-remote: remote_probe
  531. [ 2.187857@1] meson-remote c8100580.rc: protocol = 0x2
  532. [ 2.192947@1] meson-remote c8100580.rc: platform_data irq =148
  533. [ 2.198732@1] meson-remote c8100580.rc: custom_number = 5
  534. [ 2.204073@1] meson-remote c8100580.rc: ptable->map_size = 50
  535. [ 2.209743@1] meson-remote c8100580.rc: ptable->custom_name = amlogic-remote-1
  536. [ 2.216903@1] meson-remote c8100580.rc: ptable->custom_code = 0xfb04
  537. [ 2.223197@1] meson-remote c8100580.rc: ptable->release_delay = 80
  538. [ 2.229347@1] meson-remote c8100580.rc: ptable->map_size = 53
  539. [ 2.235015@1] meson-remote c8100580.rc: ptable->custom_name = amlogic-remote-2
  540. [ 2.242173@1] meson-remote c8100580.rc: ptable->custom_code = 0xfe01
  541. [ 2.248468@1] meson-remote c8100580.rc: ptable->release_delay = 80
  542. [ 2.254621@1] meson-remote c8100580.rc: ptable->map_size = 17
  543. [ 2.260285@1] meson-remote c8100580.rc: ptable->custom_name = amlogic-remote-3
  544. [ 2.267443@1] meson-remote c8100580.rc: ptable->custom_code = 0xbd02
  545. [ 2.273738@1] meson-remote c8100580.rc: ptable->release_delay = 80
  546. [ 2.279873@1] meson-remote c8100580.rc: ptable->map_size = 12
  547. [ 2.285554@1] meson-remote c8100580.rc: ptable->custom_name = xiaomi-ir-0
  548. [ 2.292282@1] meson-remote c8100580.rc: ptable->custom_code = 0x86
  549. [ 2.298406@1] meson-remote c8100580.rc: ptable->release_delay = 80
  550. [ 2.304538@1] meson-remote c8100580.rc: ptable->map_size = 1
  551. [ 2.310137@1] meson-remote c8100580.rc: ptable->custom_name = xiaomi-ir-1
  552. [ 2.316863@1] meson-remote c8100580.rc: ptable->custom_code = 0x3c
  553. [ 2.322987@1] meson-remote c8100580.rc: ptable->release_delay = 80
  554. [ 2.329114@1] meson-remote c8100580.rc: default protocol = 0x2 and id = 0
  555. [ 2.335838@1] meson-remote c8100580.rc: reg=0x0, val=0x46001e
  556. [ 2.341531@1] meson-remote c8100580.rc: reg=0x4, val=0x32000f
  557. [ 2.347225@1] meson-remote c8100580.rc: reg=0x8, val=0x1e001a
  558. [ 2.352916@1] meson-remote c8100580.rc: reg=0xc, val=0x420028
  559. [ 2.358608@1] meson-remote c8100580.rc: reg=0x10, val=0x304e2013
  560. [ 2.364558@1] meson-remote c8100580.rc: reg=0x18, val=0x5010800
  561. [ 2.370424@1] meson-remote c8100580.rc: reg=0x1c, val=0x9300
  562. [ 2.376030@1] meson-remote c8100580.rc: reg=0x20, val=0xb90b
  563. [ 2.381636@1] meson-remote c8100580.rc: reg=0x24, val=0x610050
  564. [ 2.387415@1] meson-remote c8100580.rc: reg=0x28, val=0x780061
  565. [ 2.393194@1] meson-remote c8100580.rc: reg=0x38, val=0x1388
  566. [ 2.399420@0] input: aml_keypad as /devices/platform/c8100580.rc/input/input0
  567. [ 2.406478@0] meson-remote: IR XMP protocol handler initialized
  568. [ 2.411759@0] led_init, register platform driver...
  569. [ 2.416781@0] amremote_led: control_gpio is 84
  570. [ 2.421374@0] efusekeynum: 4
  571. [ 2.423842@0] efusekeyname: mac offset: 0 size: 6
  572. [ 2.430247@0] efusekeyname: mac_bt offset: 6 size: 6
  573. [ 2.436588@0] efusekeyname: mac_wifi offset: 12 size: 6
  574. [ 2.442974@0] efusekeyname: usid offset: 18 size: 16
  575. [ 2.449585@0] efuse efuse: probe OK!
  576. [ 2.454721@0] ge2d: ge2d_init_module
  577. [ 2.456677@0] ge2d: ge2d_dev major:235
  578. [ 2.460407@0] ge2d: clock source clk_ge2d_gate ffffffc05dd23180
  579. [ 2.466069@0] ge2d: clock clk_ge2d source ffffffc05dd23200
  580. [ 2.471442@0] ge2d: clock source clk_vapb_0 ffffffc05dd23400
  581. [ 2.477032@0] ge2d: vpu clock is 666660000 HZ
  582. [ 2.481394@0] success set parent vapb_p1_composite rate to 400000000
  583. [ 2.487680@0] ge2d: ge2d clock is 400 MHZ
  584. [ 2.491620@0] ge2d: ge2d: pdev=ffffffc05e2f2800, irq=164, rstc=0x (null), clk=ffffffc05dd23180
  585. [ 2.500985@0] ge2d: ge2d start monitor
  586. [ 2.504757@3] ge2d: ge2d workqueue monitor start
  587. [ 2.505242@0] ion_dev ion_dev: assigned reserved memory node linux,ion-dev
  588. [ 2.506199@1] [tsync_pcr_init]init success.
  589. [ 2.506552@1] amvideom vsync irq: 152
  590. [ 2.507412@1] hdmitx_hdcp_init
  591. [ 2.507493@1] DI: di_module_init ok.
  592. [ 2.507500@1] CHRDEV "deinterlace" major number 233 goes below the dynamic allocation range
  593. [ 2.507504@1] DI: di_module_init: major 233
  594. [ 2.507918@1] DI: di_probe
  595. [ 2.508221@1] deinterlace deinterlace: assigned reserved memory node linux,di_cma
  596. [ 2.508228@1] DI-di_probe: flag_cma: 1
  597. [ 2.508231@1] DI: CMA size 0x2000000.
  598. [ 2.508272@1] di_irq:167,timerc_irq:168
  599. [ 2.508447@1] rdma_register, rdma_table_addr ffffff8008338000 rdma_table_addr_phy 7444c000 reg_buf ffffffc05e36a000
  600. [ 2.508451@1] rdma_register success, handle 4 table_size 8192
  601. [ 2.508454@1] DI: di_probe allocate rdma channel 4.
  602. [ 2.508459@1] DI: DI hw version 2.
  603. [ 2.508476@1] 0x000000d8:Y=d8,U=0,V=0
  604. [ 2.508479@1] 0x000000d9:Y=d9,U=0,V=0
  605. [ 2.508481@1] 0x000000da:Y=da,U=0,V=0
  606. [ 2.508484@1] 0x000000db:Y=db,U=0,V=0
  607. [ 2.508486@1] 0x000000dc:Y=dc,U=0,V=0
  608. [ 2.508488@1] 0x000000dd:Y=dd,U=0,V=0
  609. [ 2.508490@1] 0x000000de:Y=de,U=0,V=0
  610. [ 2.508493@1] 0x000000df:Y=df,U=0,V=0
  611. [ 2.508495@1] 0x000000e0:Y=e0,U=0,V=0
  612. [ 2.508497@1] 0x000000e1:Y=e1,U=0,V=0
  613. [ 2.508503@1] DI: pre canvas:
  614. [ 2.508503@1] [216] [216]
  615. [ 2.508505@1] [217] [217]
  616. [ 2.508507@1] [218] [218]
  617. [ 2.508509@1] [219] [219]
  618. [ 2.508511@1] [220] [220]
  619. [ 2.508512@1] [221] [221]
  620. [ 2.508514@1] [222] [222]
  621. [ 2.508516@1] [223] [223]
  622. [ 2.508518@1] [224] [224]
  623. [ 2.508520@1] [225] [225]
  624. [ 2.508522@1]
  625. [ 2.508529@1] 0x000000e2:Y=e2,U=0,V=0
  626. [ 2.508531@1] 0x000000e3:Y=e3,U=0,V=0
  627. [ 2.508534@1] 0x000000f0:Y=f0,U=0,V=0
  628. [ 2.508536@1] 0x000000f1:Y=f1,U=0,V=0
  629. [ 2.508538@1] 0x000000f2:Y=f2,U=0,V=0
  630. [ 2.508541@1] 0x000000f3:Y=f3,U=0,V=0
  631. [ 2.508549@1] 0x000000f4:Y=f4,U=0,V=0
  632. [ 2.508551@1] 0x000000f5:Y=f5,U=0,V=0
  633. [ 2.508553@1] 0x000000f6:Y=f6,U=0,V=0
  634. [ 2.508556@1] 0x000000f7:Y=f7,U=0,V=0
  635. [ 2.508558@1] 0x000000f8:Y=f8,U=0,V=0
  636. [ 2.508560@1] 0x000000f9:Y=f9,U=0,V=0
  637. [ 2.508564@1] DI: post canvas:
  638. [ 2.508566@1] [226] [244]
  639. [ 2.508568@1] [227] [245]
  640. [ 2.508570@1] [240] [246]
  641. [ 2.508572@1] [241] [247]
  642. [ 2.508574@1] [242] [248]
  643. [ 2.508575@1] [243] [249]
  644. [ 2.508576@1]
  645. [ 2.508581@1] 0x000000fa:Y=fa,U=0,V=0
  646. [ 2.508583@1] 0x000000fb:Y=fb,U=0,V=0
  647. [ 2.508585@1] 0x000000fc:Y=fc,U=0,V=0
  648. [ 2.508588@1] DI: support multi decoding 250~251~252.
  649. [ 2.508836@1] DI: di_probe here.
  650. [ 2.509011@1] CHRDEV "vdin" major number 232 goes below the dynamic allocation range
  651. [ 2.509015@1] vdin_drv_init: major 232
  652. [ 2.509751@1]
  653. [ 2.509751@1] vdin memory resource undefined!!
  654. [ 2.509758@1] vdin0 cma_mem_size = 16 MB
  655. [ 2.509765@1] vdin0 irq: 169 rdma irq: 2
  656. [ 2.509790@1] get fclk_div5 err
  657. [ 2.509794@1] vdin_drv_probe: vdin cannot get msr clk !!!
  658. [ 2.509905@2] vdin_drv_probe: driver initialized ok
  659. [ 2.510309@2] vdin vdin1: assigned reserved memory node linux,vdin1_cma
  660. [ 2.510312@2]
  661. [ 2.510312@2] vdin memory resource done.
  662. [ 2.510319@2] vdin1 cma_mem_size = 16 MB
  663. [ 2.510325@2] vdin1 irq: 170 rdma irq: 4
  664. [ 2.510348@2] get fclk_div5 err
  665. [ 2.510352@2] vdin_drv_probe: vdin cannot get msr clk !!!
  666. [ 2.510460@2] vdin_drv_probe: driver initialized ok
  667. [ 2.510530@2] vdin_drv_init: vdin driver init done
  668. [ 2.510536@2] [viuin..]viuin_init_module viuin module init
  669. [ 2.510977@2] [viuin..]viuin_probe probe ok.
  670. [ 2.511391@2] amlvid:info: amlvideo_init called
  671. [ 2.511391@2] amlvid:info: amlvideo_create_instance called
  672. [ 2.511396@2] amlvid:info: v4l2_dev.name=:amlvideo-000
  673. [ 2.511649@2] amlvideo-000: V4L2 device registered as video10
  674. [ 2.511999@2] amlvideo2 probe called
  675. [ 2.512260@2] amlvideo2_create_node
  676. [ 2.512260@2] amlvideo2: V4L2 device registered as video11
  677. [ 2.512316@2] amlvideo2 probe called
  678. [ 2.512513@2] amlvideo2_create_node
  679. [ 2.512514@2] amlvideo2: V4L2 device registered as video12
  680. [ 2.512582@2] PPMGRDRV: warn: ppmgr module init func called
  681. [ 2.512919@2] PPMGRDRV: err: ppmgr_driver_probe called
  682. [ 2.512996@2] Reserved memory: failed to init DMA memory pool at 0x0000000074c00000, size 0 MiB
  683. [ 2.513003@2] CHRDEV "ppmgr" major number 231 goes below the dynamic allocation range
  684. [ 2.513011@2] PPMGRDRV: info: ppmgr_dev major:231
  685. [ 2.514254@2] ionvideo-000: V4L2 device registered as video13
  686. [ 2.514432@2] ionvideo-001: V4L2 device registered as video14
  687. [ 2.514585@2] ionvideo-002: V4L2 device registered as video15
  688. [ 2.514732@2] ionvideo-003: V4L2 device registered as video16
  689. [ 2.514869@2] ionvideo-004: V4L2 device registered as video17
  690. [ 2.515010@2] ionvideo-005: V4L2 device registered as video18
  691. [ 2.515149@2] ionvideo-006: V4L2 device registered as video19
  692. [ 2.515339@2] ionvideo-007: V4L2 device registered as video20
  693. [ 2.515520@2] ionvideo-008: V4L2 device registered as video21
  694. [ 2.515524@2] ionvid: info: Video Technology Magazine Ion Video
  695. [ 2.515526@2] ionvid: info: Capture Board ver 1.0 successfully loaded
  696. [ 2.515983@2] picdec_driver_probe called.
  697. [ 2.516038@2] CHRDEV "picdec" major number 230 goes below the dynamic allocation range
  698. [ 2.516308@2] picdec: probe of picdec failed with error -22
  699. [ 2.516411@2] aml_vecm_init:module init
  700. [ 2.516794@2]
  701. [ 2.516794@2] VECM probe start
  702. [ 2.516799@2] CHRDEV "amvecm" major number 229 goes below the dynamic allocation range
  703. [ 2.517195@2] Can't find wb_sel.
  704. [ 2.517202@2] aml_vecm_probe: ok
  705. [ 2.517832@2] meson-mmc: mmc driver version: 3.02, 2017-05-15: New Emmc Host Controller
  706. [ 2.559321@1] meson-mmc: meson_mmc_probe() : success!
  707. [ 2.570237@2] meson-mmc: gpio_cd = 3b
  708. [ 2.611410@2] meson-mmc: sd irq num = 94
  709. [ 2.611576@1] meson_pinctrl: gpio virq[94] connect to GIC hwirq[96]
  710. [ 2.611581@1] meson_pinctrl: gpio virq[94] connect to GIC hwirq[97]
  711. [ 2.611642@1] meson-mmc: meson_mmc_probe() : success!
  712. [ 2.611733@2] meson-mmc: card OUT
  713. [ 2.624478@0] random: fast init done
  714. [ 2.632173@1] meson-mmc: emmc: trying cali 0-th time(s)
  715. [ 2.641052@1] meson-mmc: emmc: delay[0]= 2600 padding= 2, bidx=2
  716. [ 2.641055@1] meson-mmc: emmc: delay[1]= 3200 padding= 4, bidx=3
  717. [ 2.641058@1] meson-mmc: emmc: delay[2]= 2600 padding= 2, bidx=2
  718. [ 2.641060@1] meson-mmc: emmc: delay[3]= 2800 padding= 1, bidx=2
  719. [ 2.641063@1] meson-mmc: emmc: delay[4]= 3200 padding= 4, bidx=3
  720. [ 2.641066@1] meson-mmc: emmc: delay[5]= 2800 padding= 1, bidx=2
  721. [ 2.641069@1] meson-mmc: emmc: delay[6]= 3200 padding= 4, bidx=3
  722. [ 2.641071@1] meson-mmc: emmc: delay[7]= 2800 padding= 1, bidx=2
  723. [ 2.641074@1] meson-mmc: emmc: calibration result : max(3200), min(2600)
  724. [ 2.641078@1] meson-mmc: emmc: line_delay =0x20202303, max_cal_result =3200
  725. [ 2.641080@1] meson-mmc: calibration @0 times ok
  726. [ 2.641089@1] meson-mmc: emmc: base_index_max 3, base_index_min 2
  727. [ 2.641096@1] meson-mmc: emmc: clk 100000000 SDR mode tuning start
  728. [ 2.641384@1] meson-mmc: emmc: rx_tuning_result[0] = 10
  729. [ 2.641669@1] meson-mmc: emmc: rx_tuning_result[1] = 10
  730. [ 2.641952@1] meson-mmc: emmc: rx_tuning_result[2] = 10
  731. [ 2.642234@1] meson-mmc: emmc: rx_tuning_result[3] = 10
  732. [ 2.642517@1] meson-mmc: emmc: rx_tuning_result[4] = 10
  733. [ 2.642800@1] meson-mmc: emmc: rx_tuning_result[5] = 10
  734. [ 2.643083@1] meson-mmc: emmc: rx_tuning_result[6] = 10
  735. [ 2.643114@1] meson-mmc: Tuning transfer error: nmatch=0 tuning_err:0xffffffac
  736. [ 2.643424@1] meson-mmc: emmc: rx_tuning_result[8] = 10
  737. [ 2.643707@1] meson-mmc: emmc: rx_tuning_result[9] = 10
  738. [ 2.643710@1] meson-mmc: emmc: best_win_start =8, best_win_size =9
  739. [ 2.643714@1] meson-mmc: emmc: clock=0x100024a, adjust=0x22000
  740. [ 2.643718@1] meson-mmc: emmc: clock =0x100024a, delay=0x20202303, adjust=0x22000
  741. [ 2.643812@1] meson-aml-mmc d0074000.emmc: divider requested rate 52000000 != actual rate 50000000: ret=0
  742. [ 2.643889@1] emmc: support driver strength type 1
  743. [ 2.643971@1] meson-aml-mmc d0074000.emmc: divider requested rate 52000000 != actual rate 50000000: ret=0
  744. [ 2.643974@1] meson-mmc: emmc: try set sd/emmc to DDR mode
  745. [ 2.643981@1] meson-mmc: emmc: try set sd/emmc to DDR mode
  746. [ 2.644161@1] emmc: new HS400 MMC card at address 0001
  747. [ 2.648906@1] emmc: clock 100000000, 8-bit-bus-width
  748. [ 2.648906@1]
  749. [ 2.648906@1] mmcblk0: emmc:0001 008G30 7.28 GiB
  750. [ 2.649149@1] mmcblk0boot0: emmc:0001 008G30 partition 1 4.00 MiB
  751. [ 2.649322@1] mmcblk0boot1: emmc:0001 008G30 partition 2 4.00 MiB
  752. [ 2.653523@1] mmcblk0rpmb: emmc:0001 008G30 partition 3 4.00 MiB
  753. [ 2.655248@1] meson-mmc: Enter aml_emmc_partition_ops
  754. [ 2.655385@1] meson-mmc: meson_mmc_probe() : success!
  755. [ 2.656200@1] meson-mmc: [mmc_read_partition_tbl] mmc read partition OK!
  756. [ 2.656204@1] meson-mmc: add_emmc_partition
  757. [ 2.656486@1] meson-mmc: [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000
  758. [ 2.656501@0] aml_vrtc rtc: rtc core: registered aml_vrtc as rtc0
  759. [ 2.656753@1] meson-mmc: [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000
  760. [ 2.656755@0] CHRDEV "smc" major number 228 goes below the dynamic allocation range
  761. [ 2.657037@1] meson-mmc: [mmcblk0p03] cache offset 0x000006c00000, size 0x000010000000
  762. [ 2.657340@1] meson-mmc: [mmcblk0p04] env offset 0x000017400000, size 0x000000800000
  763. [ 2.657593@1] meson-mmc: [mmcblk0p05] logo offset 0x000018400000, size 0x000000800000
  764. [ 2.657770@0] CHRDEV "cec" major number 227 goes below the dynamic allocation range
  765. [ 2.657840@1] meson-mmc: [mmcblk0p06] recovery offset 0x000019400000, size 0x000001800000
  766. [ 2.658015@1] meson-mmc: [mmcblk0p07] misc offset 0x00001b400000, size 0x000000800000
  767. [ 2.658270@1] meson-mmc: [mmcblk0p08] dto offset 0x00001c400000, size 0x000000800000
  768. [ 2.658509@1] meson-mmc: [mmcblk0p09] cri_data offset 0x00001d400000, size 0x000000800000
  769. [ 2.658699@1] meson-mmc: [mmcblk0p10] param offset 0x00001e400000, size 0x000001000000
  770. [ 2.658866@1] meson-mmc: [mmcblk0p11] boot offset 0x00001fc00000, size 0x000001000000
  771. [ 2.659031@1] meson-mmc: [mmcblk0p12] rsv offset 0x000021400000, size 0x000001000000
  772. [ 2.659192@1] meson-mmc: [mmcblk0p13] tee offset 0x000022c00000, size 0x000002000000
  773. [ 2.659434@1] meson-mmc: [mmcblk0p14] vendor offset 0x000025400000, size 0x000006400000
  774. [ 2.659634@1] meson-mmc: [mmcblk0p15] oem offset 0x00002c000000, size 0x000012c00000
  775. [ 2.659802@1] meson-mmc: [mmcblk0p16] system offset 0x00003f400000, size 0x000046000000
  776. [ 2.659964@1] meson-mmc: [mmcblk0p17] data offset 0x000085c00000, size 0x00014c400000
  777. [ 2.659992@1] card key: card_blk_probe.
  778. [ 2.659998@1] emmc_key_init:183 emmc key lba_start:0x12020,lba_end:0x12220
  779. [ 2.660001@1] emmc key: emmc_key_init:205 ok.
  780. [ 2.662386@2] meson-mmc: amlmmc_dtb_init: register dtb chardev
  781. [ 2.662387@2] input: cec_input as /devices/virtual/input/input1
  782. [ 2.662652@2] cectx c810023c.aocec: no hdmirx reg resource
  783. [ 2.662657@2] cectx c810023c.aocec: no hhi reg resource
  784. [ 2.662772@2] cec: wake up flag:0
  785. [ 2.663598@1] meson-mmc: calc 723413d2, store 723413d2
  786. [ 2.663836@2] cectx c810023c.aocec: aml_cec_probe success end
  787. [ 2.664416@2] no efuse-version set, use default value: -1
  788. [ 2.664418@2] key unify config unifykey-num is 17
  789. [ 2.664522@2] key unify fact unifykey-num is 17
  790. [ 2.664529@2] CHRDEV "unifykeys" major number 226 goes below the dynamic allocation range
  791. [ 2.664533@2] aml_unifykeys_probe:1441=============unifykey_devno:e200000
  792. [ 2.664854@1] unifykey: device unifykeys created ok
  793. [ 2.664923@1] aml_unifykeys_init done!
  794. [ 2.665117@1] storage: storage in base: 0xffffffc005000000
  795. [ 2.665119@1] storage: storage out base: 0xffffffc005040000
  796. [ 2.665121@1] storage: storage block base: 0xffffffc005080000
  797. [ 2.665123@1] storage: probe done!
  798. [ 2.665402@1] audio_dsp: [dsp]register dsp to char divece(257)
  799. [ 2.665758@1] meson-mmc: calc 723413d2, store 723413d2
  800. [ 2.665762@1] meson-mmc: total valid 2
  801. [ 2.665865@1] CHRDEV "dtb" major number 225 goes below the dynamic allocation range
  802. [ 2.666228@1] meson-mmc: amlmmc_dtb_init: register dtb chardev OK
  803. [ 2.666229@1] meson-mmc: Exit aml_emmc_partition_ops OK.
  804. [ 2.666537@2] CHRDEV "audio_data_debug" major number 224 goes below the dynamic allocation range
  805. [ 2.667998@2] amlogic rfkill init
  806. [ 2.668238@2] enter bt_probe of_node
  807. [ 2.668276@2] not get gpio_en
  808. [ 2.668283@2] power on valid level is high
  809. [ 2.668283@2] bt: power_on_pin_OD = 0;
  810. [ 2.668690@2] BLASTER Driver Init
  811. [ 2.671596@0] usbcore: registered new interface driver snd-usb-audio
  812. [ 2.673359@0] aml_codec_T9015 c8832000.t9015: aml_T9015_audio_codec_probe
  813. [ 2.675007@0] clock source gate top_glue : ffffffc05cf64b80
  814. [ 2.675039@0] clock source gate aud_buf : ffffffc05cf64a80
  815. [ 2.675068@0] clock source gate i2s_out : ffffffc05cf64a00
  816. [ 2.675101@0] clock source gate amclk_measure : ffffffc05cf64e80
  817. [ 2.675139@0] clock source gate aififo2 : ffffffc05cf60d80
  818. [ 2.675188@0] clock source gate aud_mixer : ffffffc05cf68000
  819. [ 2.675232@0] clock source gate mixer_reg : ffffffc05cf68100
  820. [ 2.675402@0] clock source gate adc : ffffffc05cf68200
  821. [ 2.675460@0] clock source gate top_level : ffffffc05cf68300
  822. [ 2.675517@0] clock source gate aoclk : ffffffc05cf68400
  823. [ 2.675577@0] clock source gate aud_in : ffffffc05cf68500
  824. [ 2.675827@0] aml-i2s-dai I2S: I2S Mic is in platform!
  825. [ 2.675832@0] aml-i2s-dai I2S: i2s_pos_sync is 0
  826. [ 2.676572@0] aml_pcm_dai: pcm mode detection =1
  827. [ 2.677458@0] aml_spdif_dai: enterd aml_spdif_play,set_clock:-1,sample_rate=4
  828. [ 2.677468@0] aml_spdif_dai: share the same clock
  829. [ 2.677470@0] aml_spdif_dai: set 958 audio clk div 2
  830. [ 2.677477@0] aml_audio_hw: IEC958 16bit
  831. [ 2.677481@0] hdmitx: audio: aout notify rate 48000
  832. [ 2.677483@0] hdmitx: audio: aout notify size 16
  833. [ 2.677486@0] hdmitx: audio: aout notify format CT_PCM
  834. [ 2.678043@0] aml_snd_dmic d0042000.snd_dmic: Dmic probe!
  835. [ 2.678138@0] periphs-banks:84 is using the pin GPIODV_24 as gpio
  836. [ 2.678144@0] meson-pinctrl pinctrl@4b0: request() failed for pin 84
  837. [ 2.678149@0] meson-pinctrl pinctrl@4b0: pin-84 (d0042000.snd_dmic) status -22
  838. [ 2.678155@0] meson-pinctrl pinctrl@4b0: could not request pin 84 (GPIODV_24) from group dmic_in_dv24 on device pinctrl-meson
  839. [ 2.678159@0] aml_snd_dmic d0042000.snd_dmic: Error applying setting, reverse things back
  840. [ 2.678166@0] aml_snd_dmic d0042000.snd_dmic: pinctrls error!
  841. [ 2.678185@0] aml_snd_dmic: probe of d0042000.snd_dmic failed with error -22
  842. [ 2.679589@0] aml_snd_card: aml_card_dai_parse_of codec_node count:1
  843. [ 2.679678@0] aml_snd_card: aml_card_dai_parse_of codec_node count:1
  844. [ 2.679786@0] aml_snd_card: aml_card_dai_parse_of codec_node count:1
  845. [ 2.883662@0] aml_snd_card: headphone detection disable=1
  846. [ 2.883670@0] aml_snd_card: no spk event delay time set
  847. [ 2.885114@0] aml_meson_snd_card aml_sound_meson: T9015-audio-hifi <-> I2S mapping ok
  848. [ 2.885903@0] aml_meson_snd_card aml_sound_meson: dit-hifi <-> SPDIF mapping ok
  849. [ 2.886042@0] aml_pcm: enter aml_pcm_new dai->name: PCM dai->id: 0
  850. [ 2.887702@0] aml_meson_snd_card aml_sound_meson: pcm2bt-pcm <-> PCM mapping ok
  851. [ 2.887739@0] aml_meson_snd_card aml_sound_meson: ASoC: no source widget found for LOUTL
  852. [ 2.887744@0] aml_meson_snd_card aml_sound_meson: ASoC: Failed to add route LOUTL -> direct -> Ext Spk
  853. [ 2.887749@0] aml_meson_snd_card aml_sound_meson: ASoC: no source widget found for LOUTR
  854. [ 2.887752@0] aml_meson_snd_card aml_sound_meson: ASoC: Failed to add route LOUTR -> direct -> Ext Spk
  855. [ 2.888002@0] aml-spdif-dai SPDIF: ASoC: Failed to create S/PDIF Playback debugfs file
  856. [ 2.888008@0] aml-spdif-dai SPDIF: ASoC: Failed to create S/PDIF Capture debugfs file
  857. [ 2.889650@2] aml_snd_card: enable i2sclk in startup
  858. [ 2.889897@2] periphs-banks:33 is using the pin GPIOH_6 as gpio
  859. [ 2.889907@2] meson-pinctrl pinctrl@4b0: request() failed for pin 33
  860. [ 2.889912@2] meson-pinctrl pinctrl@4b0: pin-33 (aml_sound_meson) status -22
  861. [ 2.889918@2] meson-pinctrl pinctrl@4b0: could not request pin 33 (GPIOH_6) from group i2s_am_clk on device pinctrl-meson
  862. [ 2.889923@2] aml_meson_snd_card aml_sound_meson: Error applying setting, reverse things back
  863. [ 2.889934@2] aml_snd_card: aml_pinmux_init,aml_pinmux_init error!
  864. [ 2.892184@2] GACT probability NOT on
  865. [ 2.892201@2] Mirror/redirect action on
  866. [ 2.892211@2] u32 classifier
  867. [ 2.892213@2] Actions configured
  868. [ 2.892220@2] Netfilter messages via NETLINK v0.30.
  869. [ 2.892525@2] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
  870. [ 2.892843@2] ctnetlink v0.93: registering with nfnetlink.
  871. [ 2.893417@2] xt_time: kernel timezone is -0000
  872. [ 2.893506@2] ipip: IPv4 and MPLS over IPv4 tunneling driver
  873. [ 2.898260@2] ip_tables: (C) 2000-2006 Netfilter Core Team
  874. [ 2.898427@2] arp_tables: arp_tables: (C) 2002 David S. Miller
  875. [ 2.902861@2] Initializing XFRM netlink socket
  876. [ 2.903528@2] NET: Registered protocol family 10
  877. [ 2.904931@2] mip6: Mobile IPv6
  878. [ 2.904962@2] ip6_tables: (C) 2000-2006 Netfilter Core Team
  879. [ 2.914405@2] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  880. [ 2.915947@2] NET: Registered protocol family 17
  881. [ 2.915978@2] NET: Registered protocol family 15
  882. [ 2.916024@2] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  883. [ 2.916168@2] Bluetooth: RFCOMM TTY layer initialized
  884. [ 2.916191@2] Bluetooth: RFCOMM socket layer initialized
  885. [ 2.916229@2] Bluetooth: RFCOMM ver 1.11
  886. [ 2.916260@2] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  887. [ 2.916263@2] Bluetooth: BNEP filters: protocol multicast
  888. [ 2.916272@2] Bluetooth: BNEP socket layer initialized
  889. [ 2.916276@2] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  890. [ 2.916283@2] Bluetooth: HIDP socket layer initialized
  891. [ 2.916327@2] l2tp_core: L2TP core driver, V2.0
  892. [ 2.916340@2] l2tp_ppp: PPPoL2TP kernel driver, V2.0
  893. [ 2.916342@2] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
  894. [ 2.916372@2] l2tp_netlink: L2TP netlink interface
  895. [ 2.916422@2] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
  896. [ 2.916444@2] l2tp_debugfs: L2TP debugfs support
  897. [ 2.916447@2] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
  898. [ 2.916495@2] NET: Registered protocol family 35
  899. [ 2.916568@2] Key type dns_resolver registered
  900. [ 2.919920@2] Registered cp15_barrier emulation handler
  901. [ 2.919929@2] Registered setend emulation handler
  902. [ 2.920844@0] registered taskstats version 1
  903. [ 2.931727@0] dwc3 c9000000.dwc3: Configuration mismatch. dr_mode forced to host
  904. [ 3.633258@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  905. [ 3.633286@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  906. [ 3.633731@0] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f664 hci version 0x100 quirks 0x02010010
  907. [ 3.633798@0] xhci-hcd xhci-hcd.0.auto: irq 158, io mem 0xc9000000
  908. [ 3.634843@0] hub 1-0:1.0: USB hub found
  909. [ 3.634883@0] hub 1-0:1.0: 2 ports detected
  910. [ 3.635237@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  911. [ 3.635252@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  912. [ 3.635367@0] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  913. [ 3.636195@0] hub 2-0:1.0: USB hub found
  914. [ 3.636234@0] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
  915. [ 3.637703@1] aml_vrtc rtc: setting system clock to 2017-01-01 00:00:08 UTC (1483228808)
  916. [ 3.638201@1] dwc_otg: usb0: type: 0 speed: 0, config: 0, dma: 0, id: 0, phy: d0078000, ctrl: 0
  917. [ 3.738513@1] dwc_otg: Core Release: 3.10a
  918. [ 3.738520@1] dwc_otg: Setting default values for core params
  919. [ 3.738537@1] dwc_otg: curmode: 0, host_only: 0
  920. [ 3.750896@1] dwc_otg: Using Buffer DMA mode
  921. [ 3.750900@1] dwc_otg: OTG VER PARAM: 1, OTG VER FLAG: 1
  922. [ 3.750904@1] dwc_otg: Working on port type = OTG
  923. [ 3.750907@1] dwc_otg: Current port type: SLAVE
  924. [ 3.751180@1] dwc_otg c9100000.dwc2_a: DWC OTG Controller
  925. [ 3.751214@1] dwc_otg c9100000.dwc2_a: new USB bus registered, assigned bus number 3
  926. [ 3.751255@1] dwc_otg c9100000.dwc2_a: irq 160, io mem 0x00000000
  927. [ 3.752269@0] hub 3-0:1.0: USB hub found
  928. [ 3.752311@0] hub 3-0:1.0: 1 port detected
  929. [ 3.752635@0] dwc_otg: Dedicated Tx FIFOs mode
  930. [ 3.753157@0] dwc_otg: using timer detectid change, ffffffc05cd86800
  931. [ 3.755349@0] cpucore_cooling_register, max_cpu_core_num:4
  932. [ 3.755562@0] thermal: read num_of_pp failed
  933. [ 3.761149@0] gxbb_pm: enter meson_pm_probe!
  934. [ 3.761171@0] gxbb_pm: system suspend level: 1
  935. [ 3.761288@0] gxbb_pm: meson_pm_probe done
  936. [ 3.76179u 4.376800@0] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 115200 to 115200
  937. [ 4.381562@0] Freeing unused kernel memory: 4416K
  938. [ 4.395570@0] init: init first stage started!
  939. [ 4.395909@0] init: Using Android DT directory /proc/device-tree/firmware/android/
  940. [ 4.613456@3] init: [libfs_mgr]Enabling dm-verity for vendor (mode 2)
  941. [ 4.614303@3] init: [libfs_mgr]loading verity table: '1 /dev/block/vendor /dev/block/vendor 4096 4096 25189 25189 sha256 03c9baea454c9cb1495727019a7d8757222816343858d646d50f2259543eb900 aee087a5be3b982978c923f566a94613496b417f2af592639bc80d141e34dfe7 10 restart_on_corruption use_fec_from_device /dev/block/vendor fec_start 25397 fec_blocks 25397 fec_roots 2 ignore_zero_blocks'
  942. [ 4.655170@0] EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: barrier=1,inode_readahead_blks=8
  943. [ 4.659766@0] init: [libfs_mgr]__mount(source=/dev/block/dm-0,target=/vendor,type=ext4)=0: Success
  944. [ 4.962340@3] init: [libfs_mgr]Enabling dm-verity for system (mode 2)
  945. [ 4.963203@3] init: [libfs_mgr]loading verity table: '1 /dev/block/system /dev/block/system 4096 4096 282237 282237 sha256 b176b199676210468dcbd39d5085a75246b4cc10d3b4cb8423557d5aea6e805f aee087a5be3b982978c923f566a94613496b417f2af592639bc80d141e34dfe7 10 restart_on_corruption use_fec_from_device /dev/block/system fec_start 284469 fec_blocks 284469 fec_roots 2 ignore_zero_blocks'
  946. [ 5.005405@0] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: barrier=1,inode_readahead_blks=8
  947. [ 5.009993@2] init: [libfs_mgr]__mount(source=/dev/block/dm-1,target=/system,type=ext4)=0: Success
  948. [ 5.021733@2] EXT4-fs (mmcblk0p15): mounted filesystem with ordered data mode. Opts: barrier=1,inode_readahead_blks=8
  949. [ 5.029379@2] init: [libfs_mgr]__mount(source=/dev/block/oem,target=/oem,type=ext4)=0: Success
  950. [ 5.038019@2] init: Skipped setting INIT_AVB_VERSION (not in recovery mode)
  951. [ 5.080649@2] SELinux: Class bpf not defined in policy.
  952. [ 5.080687@2] SELinux: the above unknown classes and permissions will be denied
  953. [ 5.189054@2] audit: type=1403 audit(1483228810.048:2): policy loaded auid=4294967295 ses=4294967295
  954. [ 5.192920@2] audit: type=1404 audit(1483228810.052:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
  955. [ 5.226673@1] init: 3 output lines suppressed due to ratelimiting
  956. [ 5.228547@1] init: init second stage started!
  957. [ 5.239012@2] init: Using Android DT directory /proc/device-tree/firmware/android/
  958. [ 5.244790@2] selinux: SELinux: Loaded file_contexts
  959. [ 5.244790@2]
  960. [ 5.248316@2] selinux: SELinux: Loaded property_contexts from /system/etc/selinux/plat_property_contexts & /vendor/etc/selinux/nonplat_property_contexts.
  961. [ 5.248316@2]
  962. [ 5.262791@2] init: Running restorecon...
  963. [ 5.273810@2] init: waitid failed: No child processes
  964. [ 5.276295@1] init: Couldn't load property file: Unable to open '/odm/default.prop': No such file or directory: No such file or directory
  965. [ 5.287615@2] init: Created socket '/dev/socket/property_service', mode 666, user 0, group 0
  966. [ 5.294058@2] init: Parsing file /init.rc...
  967. [ 5.298511@2] init: Added '/init.environ.rc' to import list
  968. [ 5.400207@3] optee: no symbol version for module_layout
  969. [ 5.400250@3] optee: loading out-of-tree module taints kernel.
  970. [ 5.401760@0] ueventd: ueventd started!
  971. [ 5.401821@0] ueventd: Parsing file /ueventd.rc...
  972. [ 5.402912@0] ueventd: Parsing file /vendor/ueventd.rc...
  973. [ 5.402944@0] ueventd: Unable to open '/vendor/ueventd.rc': No such file or directory
  974. [ 5.402974@0] ueventd: Parsing file /odm/ueventd.rc...
  975. [ 5.403001@0] ueventd: Unable to open '/odm/ueventd.rc': No such file or directory
  976. [ 5.403112@0] ueventd: Parsing file /ueventd.amlogic.rc...
  977. [ 5.403882@0] ueventd: /ueventd.amlogic.rc: 90: /sys/ lines must have 5 entries
  978. [ 5.407540@0] selinux: SELinux: Loaded file_contexts
  979. [ 5.407540@0]
  980. [ 5.460618@3] CHRDEV "tee" major number 223 goes below the dynamic allocation range
  981. [ 5.469956@3] optee_armtz: initialized driver
  982. [ 5.524306@2] selinux: SELinux: Loaded file_contexts
  983. [ 5.524306@2]
  984. [ 5.668364@1] Registered swp emulation handler
  985. [ 5.669851@1] fb: afbc: 1
  986. [ 5.677697@3] EXT4-fs (mmcblk0p17): Ignoring removed nomblk_io_submit option
  987. [ 5.809373@3] EXT4-fs (mmcblk0p17): recovery complete
  988. [ 5.809813@3] EXT4-fs (mmcblk0p17): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
  989. [ 6.386354@2] e2fsck: e2fsck 1.43.3 (04-Sep-2016)
  990. [ 6.386354@2]
  991. [ 6.387129@2] e2fsck: Pass 1: Checking inodes, blocks, and sizes
  992. [ 6.387129@2]
  993. [ 6.394693@2] e2fsck: Pass 2: Checking directory structure
  994. [ 6.394693@2]
  995. [ 6.401754@2] e2fsck: Pass 3: Checking directory connectivity
  996. [ 6.401754@2]
  997. [ 6.409079@2] e2fsck: Pass 4: Checking reference counts
  998. [ 6.409079@2]
  999. [ 6.416239@2] e2fsck: Pass 5: Checking group summary information
  1000. [ 6.416239@2]
  1001. [ 6.423521@2] e2fsck: data: 4656/336672 files (14.1% non-contiguous), 434217/1344512 blocks
  1002. [ 6.423521@2]
  1003. [ 6.434454@1] EXT4-fs (mmcblk0p17): Ignoring removed nomblk_io_submit option
  1004. [ 6.443804@1] EXT4-fs (mmcblk0p17): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
  1005. [ 6.457693@1] EXT4-fs (mmcblk0p3): Ignoring removed nomblk_io_submit option
  1006. [ 6.463133@1] EXT4-fs (mmcblk0p3): recovery complete
  1007. [ 6.464399@1] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
  1008. [ 6.577981@3] e2fsck: e2fsck 1.43.3 (04-Sep-2016)
  1009. [ 6.577981@3]
  1010. [ 6.578719@3] e2fsck: Pass 1: Checking inodes, blocks, and sizes
  1011. [ 6.578719@3]
  1012. [ 6.586313@3] e2fsck: Pass 2: Checking directory structure
  1013. [ 6.586313@3]
  1014. [ 6.594409@3] EXT4-fs (mmcblk0p3): Ignoring removed nomblk_io_submit option
  1015. [ 6.602410@1] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
  1016. [ 6.613677@1] EXT4-fs (mmcblk0p13): Ignoring removed nomblk_io_submit option
  1017. [ 6.620743@3] EXT4-fs (mmcblk0p13): recovery complete
  1018. [ 6.623407@3] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
  1019. [ 6.702527@2] EXT4-fs (mmcblk0p13): Ignoring removed nomblk_io_submit option
  1020. [ 6.705548@2] EXT4-fs (mmcblk0p13): mounted filesystem with ordered data mode. Opts: nodelalloc,nomblk_io_submit,errors=panic
  1021. [ 6.716662@2] init: 11 output lines suppressed due to ratelimiting
  1022. [ 6.723735@1] zram0: detected capacity change from 0 to 524288000
  1023. [ 6.771550@0] mkswap: Swapspace size: 511996k, UUID=f732a5e8-80f6-4bcf-9c87-53b447ecb878
  1024. [ 6.774595@0] Adding 511996k swap on /dev/block/zram0. Priority:-1 extents:1 across:511996k SS
  1025. [ 6.803099@2] register clk_set_setting cpu[33]
  1026. [ 6.817274@1] Registered firmware driver success.
  1027. [ 6.817913@1] Try load video/gx_h264_enc.bin ...
  1028. [ 6.823003@3] load firmware size : 25088, Name : video/gx_h264_enc.bin.
  1029. [ 6.827897@3] Try load video/h264_multi.bin ...
  1030. [ 6.832269@3] firmware_codec firmware_vdec: Direct firmware load for video/h264_multi.bin failed with error -2
  1031. [ 6.842069@3] Error : -2 can't load the video/h264_multi.bin.
  1032. [ 6.847760@3] get data from fsys fail.
  1033. [ 6.851461@3] invaild type.
  1034. [ 6.854394@3] Try load video/h264.bin ...
  1035. [ 6.858363@3] firmware_codec firmware_vdec: Direct firmware load for video/h264.bin failed with error -2
  1036. [ 6.867683@3] Error : -2 can't load the video/h264.bin.
  1037. [ 6.872850@3] get data from fsys fail.
  1038. [ 6.876558@3] invaild type.
  1039. [ 6.879502@3] Try load video/h265.bin ...
  1040. [ 6.883441@3] firmware_codec firmware_vdec: Direct firmware load for video/h265.bin failed with error -2
  1041. [ 6.892779@3] Error : -2 can't load the video/h265.bin.
  1042. [ 6.897944@3] get data from fsys fail.
  1043. [ 6.901657@3] invaild type.
  1044. [ 6.904602@3] Try load video/video_ucode.bin ...
  1045. [ 6.920580@0] load firmware size : 429568, Name : video/video_ucode.bin.
  1046. [ 7.013186@3] Amlogic A/V streaming port init
  1047. [ 7.016347@3] get gate demux control ok ffffffc05b717600
  1048. [ 7.017209@3] get gate parser_top control ok ffffffc05b714f00
  1049. [ 7.022959@3] get gate vdec control ok ffffffc05b713180
  1050. [ 7.028134@3] get gate clk_vdec_mux control ok ffffffc05b713680
  1051. [ 7.033979@3] get gate clk_hcodec_mux control ok ffffffc05b7f4c00
  1052. [ 7.039997@3] get gate clk_hevc_mux control ok ffffffc05b7f4b00
  1053. [ 7.118975@3] ammvdec_h264 module init
  1054. [ 7.221296@3] amvdec_mmpeg4 module init
  1055. [ 7.284749@3] amvenc_avc_probe -- reserved memory config fail.
  1056. [ 7.284947@3] amvenc_avc - cma memory pool size: 60 MB
  1057. [ 7.290083@3] encode_wq_init.
  1058. [ 7.292987@3] encode start monitor.
  1059. [ 7.296527@3] CHRDEV "amvenc_avc" major number 222 goes below the dynamic allocation range
  1060. [ 7.296528@1] encode workqueue monitor start.
  1061. [ 7.375491@3] logd.auditd: start
  1062. [ 7.454803@3] binder: 2602:2602 ioctl 620a fa0db6aa returned -22
  1063. [ATOS] TDK-v2.4
  1064. [ATOS] TA verified (2048-2048)
  1065. [ATOS] *WARNING* TA Version Table not ready!
  1066. MESSAGE: USER-TA:log_msg:70: KeymasterTA (info): app/ipc/keymaster_ipc.cpp, Line 736: Amlogic KEYMASTER 2.0! Build Time: Apr 27 2018 18:37:55
  1067. [ 7.585800@0]
  1068. [ 7.585867@0] **********************************************************
  1069. [ 7.591625@0] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
  1070. [ 7.598247@0] ** **
  1071. [ 7.604955@0] ** trace_printk() being used. Allocating extra memory. **
  1072. [ 7.611547@1] ** **
  1073. [ 7.618160@1] ** This means that this is a DEBUG kernel and it is **
  1074. [ 7.624821@1] ** unsafe for production use. **
  1075. [ 7.631447@1] ** **
  1076. [ 7.638130@1] ** If you see this message and you are not debugging **
  1077. [ 7.644765@3] ** the kernel, report this immediately to your vendor! **
  1078. [ 7.651366@3] ** **
  1079. [ 7.658004@3] ** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **
  1080. [ 7.664654@3] **********************************************************
  1081. [ 7.687994@3] mali-utgard d00c0000.mali: max pp is 3
  1082. [ 7.688034@3] mali-utgard d00c0000.mali: set min pp to default 1
  1083. [ 7.693316@3] mali-utgard d00c0000.mali: min pp is 1
  1084. [ 7.698203@3] mali-utgard d00c0000.mali: set min clk default to 0
  1085. [ 7.704244@3] mali-utgard d00c0000.mali: min clk is 0
  1086. [ 7.709373@3] mali-utgard d00c0000.mali: hiu io source 0xffffff80086f9000
  1087. [ 7.716151@3] mali-utgard d00c0000.mali: hiu io source 0xffffff80086fb000
  1088. [ 7.722958@3] mali-utgard d00c0000.mali: num of pp used most of time 3
  1089. [ 7.729423@3] mali-utgard d00c0000.mali: clock dvfs cfg table size is 7
  1090. [ 7.736083@3] mali-utgard d00c0000.mali: max clk set 5
  1091. [ 7.741068@3] mali-utgard d00c0000.mali: max clk is 5
  1092. [ 7.746159@3] mali-utgard d00c0000.mali: turbo clk set to 6
  1093. [ 7.751676@3] mali-utgard d00c0000.mali: turbo clk is 6
  1094. [ 7.756936@3] mali-utgard d00c0000.mali: default clk is 4
  1095. [ 7.762371@3] mali-utgard d00c0000.mali: ====================0====================
  1096. [ 7.762371@3] clk_freq= 125000000, clk_parent=fclk_div4, voltage=1150, keep_count=5, threshod=<30 250>, clk_sample=125
  1097. [ 7.780485@3] mali-utgard d00c0000.mali: ====================1====================
  1098. [ 7.780485@3] clk_freq= 285714285, clk_parent=fclk_div7, voltage=1150, keep_count=5, threshod=<100 250>, clk_sample=285
  1099. [ 7.798682@3] mali-utgard d00c0000.mali: ====================2====================
  1100. [ 7.798682@3] clk_freq= 400000000, clk_parent=fclk_div5, voltage=1150, keep_count=3, threshod=<168 250>, clk_sample=400
  1101. [ 7.816881@3] mali-utgard d00c0000.mali: ====================3====================
  1102. [ 7.816881@3] clk_freq= 500000000, clk_parent=fclk_div4, voltage=1150, keep_count=2, threshod=<190 250>, clk_sample=500
  1103. [ 7.835080@3] mali-utgard d00c0000.mali: ====================4====================
  1104. [ 7.835080@3] clk_freq= 666666666, clk_parent=fclk_div3, voltage=1150, keep_count=1, threshod=<177 250>, clk_sample=666
  1105. [ 7.853279@3] mali-utgard d00c0000.mali: ====================5====================
  1106. [ 7.853279@3] clk_freq= 744000000, clk_parent= gp0_pll, voltage=1150, keep_count=1, threshod=<213 255>, clk_sample=744
  1107. [ 7.871481@3] mali-utgard d00c0000.mali: ====================6====================
  1108. [ 7.871481@3] clk_freq= 744000000, clk_parent= gp0_pll, voltage=1150, keep_count=1, threshod=<213 255>, clk_sample=744
  1109. [ 7.889674@3] mali-utgard d00c0000.mali: clock dvfs table size is 7
  1110. [ 7.901654@0] gpu cooling register okay with err=0
  1111. [ 7.904488@0] gpu core cooling register okay with err=0
  1112. [ 7.906363@0] Mali: Mali device driver loaded
  1113. [ 7.929965@3] tntfs: module license 'Commercial. For support email [email protected].' taints kernel.
  1114. [ 7.934072@3] Disabling lock debugging due to kernel taint
  1115. [ 7.958721@3] Tuxera NTFS driver 3017.7.4.6 [Flags: R/W MODULE].
  1116. [ 7.959099@3] Built against headers 4.9.61 #7 SMP PREEMPT Thu Aug 2 17:19:57 CST 2018 aarch64
  1117. [ 7.967567@3] Running on kernel 4.9.61 #1 SMP PREEMPT Sun Nov 18 10:56:38 CST 2018 aarch64
  1118. [ 8.000744@3] Tuxera exFAT driver version 3017.7.24.1 [Flags: R/W MODULE].
  1119. [ 8.001982@3] Built against headers 4.9.61 #7 SMP PREEMPT Thu Aug 2 17:19:57 CST 2018 aarch64
  1120. [ 8.010452@3] Running on kernel 4.9.61 #1 SMP PREEMPT Sun Nov 18 10:56:38 CST 2018 aarch64
  1121. [ 8.112306@1] logd.daemon: reinit
  1122. [ATOS] TDK-v2.4
  1123. [ 8.420800@0] amlkey_init() enter!
  1124. [ 8.433504@0] emmc_key_read:114, read ok
  1125. [ 8.433595@0] amlkey_init() storagekey_info.buffer=ffffffc005080000, storagekey_info.size = 40000!
  1126. [ATOS] TA verified (2048-2048)
  1127. [ATOS] *WARNING* TA Version Table not ready!
  1128. [ 8.517966@0] vfm_map_store:rm default
  1129. [ 8.518098@0] vfm_map_store:add default decoder ppmgr deinterlace amvideo
  1130. [ 8.569498@0] file system registered
  1131. [ 8.575909@2] healthd: No battery devices found
  1132. [ 8.576314@2] healthd: battery l=100 v=0 t=42.4 h=2 st=2 chg=a
  1133. [ 8.608961@0] ffs_data_put(): freeing
  1134. [ 8.686176@2] fb: osd_open, 1348, fb_index=0,fb_rmem_size=25165824
  1135. [ 8.687240@2] fb: osd_open, 1348, fb_index=1,fb_rmem_size=1048576
  1136. [ 8.820977@0] dhd_module_init: in Dongle Host Driver, version 1.579.77.41.3 (r)
  1137. [ 8.822744@0] ======== dhd_wlan_init_plat_data ========
  1138. [ 8.828003@0] dhd_wlan_init_gpio: GPIO(WL_REG_ON) = -1
  1139. [ 8.832983@0] dhd_wlan_init_gpio: GPIO(WL_HOST_WAKE) = -1
  1140. [ 8.838352@0] dhd_wlan_init_gpio: host_oob_irq: 132
  1141. [ 8.843186@0] dhd_wlan_init_gpio: host_oob_irq_flags=0x418
  1142. [ 8.848689@0] dhd_wifi_platform_load: Enter
  1143. [ 8.852776@0] Power-up adapter 'DHD generic adapter'
  1144. [ 8.857658@0] wifi_platform_set_power = 1
  1145. [ 8.861605@0] ======== PULL WL_REG_ON(-1) HIGH! ========
  1146. [ 8.866974@0] aml_wifi wifi: [extern_wifi_set_enable] WIFI Disable! 96
  1147. [ 8.875396@2] set hdcp_pwr 1
  1148. [ 8.941302@3] vout: vout_io_open
  1149. [ 8.941345@3] vout: vout_ioctl: cmd_dir = 0x2, cmd_nr = 0x0
  1150. [ 8.944549@3] vout: vout_io_release
  1151. [ 9.073551@1] aml_wifi wifi: [extern_wifi_set_enable] WIFI Enable! 96
  1152. [ 9.579322@3] wifi_platform_bus_enumerate device present 1
  1153. [ 9.579358@3] ======== Card detection to detect SDIO card! ========
  1154. [ 9.586795@0] meson-mmc: sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
  1155. [ 9.591942@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
  1156. [ 9.598375@0] meson-mmc: meson_mmc_irq_thread 2461 sdio: cmd:52
  1157. [ 9.605341@0] meson-mmc: sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
  1158. [ 9.610743@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
  1159. [ 9.617163@0] meson-mmc: meson_mmc_irq_thread 2461 sdio: cmd:52
  1160. [ 9.627660@0] meson-mmc: sdio: resp_timeout,vstat:0xa3ff2800,virqc:3fff
  1161. [ 9.629546@0] meson-mmc: sdio: err: wait for irq service, bus_fsm:0x8
  1162. [ 9.635945@0] meson-mmc: meson_mmc_irq_thread 2461 sdio: cmd:8
  1163. [ 9.682843@3] meson-mmc: sdio: clk 200000000 SDR mode tuning start
  1164. [ 9.683647@3] meson-mmc: sdio: rx_tuning_result[0] = 10
  1165. [ 9.688899@3] meson-mmc: sdio: rx_tuning_result[1] = 10
  1166. [ 9.694016@3] meson-mmc: sdio: rx_tuning_result[2] = 10
  1167. [ 9.699201@3] meson-mmc: sdio: rx_tuning_result[3] = 10
  1168. [ 9.704373@3] meson-mmc: sdio: rx_tuning_result[4] = 10
  1169. [ 9.709345@3] meson-mmc: sdio: best_win_start =0, best_win_size =5
  1170. [ 9.715426@3] meson-mmc: sdio: clock=0x1000245, adjust=0x2000
  1171. [ 9.721146@3] meson-mmc: sdio: clock =0x1000245, delay=0x0, adjust=0x2000
  1172. [ 9.731926@3] sdio: new ultra high speed SDR104 SDIO card at address 0001
  1173. [ 9.734593@3] sdio: clock 200000000, 4-bit-bus-width
  1174. [ 9.740586@2] meson-mmc: [sdio_reinit] finish
  1175. [ 9.761041@2] bcmsdh_register: register client driver
  1176. [ 9.761306@0] bcmsdh_sdmmc_probe: Enter num=1
  1177. [ 9.767135@1] bcmsdh_sdmmc_probe: Enter num=2
  1178. [ 9.769185@1] bus num (host idx)=2, slot num (rca)=1
  1179. [ 9.774053@1] found adapter info 'DHD generic adapter'
  1180. [ 9.779163@1] alloc static buf at ffffffc05ddc0000!
  1181. [ 9.784196@1] sdioh_attach: set sd_f2_blocksize 256
  1182. [ 9.788852@1] sdioh_attach: sd clock rate = 0
  1183. [ 9.794172@1] dhdsdio_probe : no mutex held. set lock
  1184. [ 9.798283@1] F1 signature read @0x18000000=0x15464345
  1185. [ 9.806925@2] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x6 pkg:0x4
  1186. [ 9.810507@2] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000
  1187. [ 9.816874@2] wifi_platform_get_mac_addr
  1188. [ 9.820596@2] ======== dhd_wlan_get_mac_addr ========
  1189. [ 9.825624@2] CUSTOM MAC=c8:28:32:2b:0a:26
  1190. [ 9.829660@2] dhd_conf_set_chiprev: chip=0x4345, chiprev=6
  1191. [ 9.835184@2] CFG80211-ERROR) wl_setup_wiphy : Registering Vendor80211
  1192. [ 9.844094@2] wl_escan_attach: Enter
  1193. [ 9.845096@2] wl_escan_init: Enter
  1194. [ 9.848560@2] wl_create_event_handler(): thread:wl_escan_handler:ac7 started
  1195. [ 9.848563@1] tsk Enter, tsk = 0xffffffc05dfd0198
  1196. [ 9.860286@3] dhd_attach(): thread:dhd_watchdog_thread:ac8 started
  1197. [ 9.866346@1] dhd_attach(): thread:dhd_dpc:ac9 started
  1198. [ 9.871460@2] dhd_attach(): thread:dhd_rxf:aca started
  1199. [ 9.876419@2] dhd_deferred_work_init: work queue initialized
  1200. [ 9.882077@2] dhd_bus_set_default_min_res_mask: Unhandled chip id
  1201. [ 9.888307@2] sdioh_cis_read: func_cis_ptr[0]=0x10ac
  1202. [ 9.905243@2] Dongle Host Driver, version 1.579.77.41.3 (r)
  1203. [ 9.907858@2] Register interface [wlan0] MAC: c8:28:32:2b:0a:26
  1204. [ 9.907858@2]
  1205. [ 9.912871@2] dhd_wl_ioctl: returning as busstate=0
  1206. [ 9.917662@2] dhd_dbg_detach_pkt_monitor, 2204
  1207. [ 9.922021@2] dhd_bus_devreset: == Power OFF ==
  1208. [ 9.926820@2] bcmsdh_oob_intr_unregister: Enter
  1209. [ 9.931020@2] bcmsdh_oob_intr_unregister: irq is not registered
  1210. [ 9.936878@2] dhd_txglom_enable: enable 0
  1211. [ 9.940832@2] dhd_conf_set_txglom_params: txglomsize=0, deferred_tx_len=0, bus_txglom=-1
  1212. [ 9.948919@2] dhd_conf_set_txglom_params: tx_in_rx=1, txinrx_thres=-1, dhd_txminmax=1
  1213. [ 9.956628@2] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=5
  1214. [ 9.963446@2] sdioh_set_mode: set txglom_mode to copy
  1215. [ 9.968426@2] dhd_bus_devreset: WLAN OFF DONE
  1216. [ 9.972910@2] wifi_platform_set_power = 0
  1217. [ 9.976797@2] ======== PULL WL_REG_ON(-1) LOW! ========
  1218. [ 9.981984@2] dhdsdio_probe : the lock is released.
  1219. [ 9.987702@2] dhd_module_init: Exit err=0
  1220. [ 10.011839@3] restore hdcp_pwr 0
  1221. [ 10.011942@3] amhdmitx amhdmitx0: hdmitx20: stop14
  1222. [ 10.014548@3] amhdmitx amhdmitx0: hdmitx20: stop22
  1223. [ 10.147606@2] type=1400 audit(1483228815.000:4): avc: denied { read } for pid=2784 comm="applypatch" name="recovery" dev="tmpfs" ino=10670 scontext=u:r:install_recovery:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=0
  1224. [ 10.166081@2] read descriptors
  1225. [ 10.166094@2] read strings
  1226. [ 10.269033@0] USB RESET
  1227. [ 10.338563@0] android_work: sent uevent USB_STATE=CONNECTED
  1228. [ 10.345779@0] configfs-gadget gadget: high-speed config #1: b
  1229. [ 10.347558@0] android_work: sent uevent USB_STATE=CONFIGURED
  1230. [ 10.980260@0] avc open
  1231. [ 10.980291@0] amvenc_avc check CMA pool success, max instance: 3.
  1232. [ 10.992989@0] allocating phys 0x60800000, size 20480k, wq:ffffffc057e68800.
  1233. [ 10.998490@0] amvenc_avc memory config success, buff start:0x60800000, size is 0x1400000, wq:ffffffc057e68800.
  1234. [ 11.004643@0] avc release, wq:ffffffc057e68800
  1235. [ 11.008949@0] remove encode_work_queue ffffffc057e68800 success, _destroy_encode_work_queue line 3490.
  1236. [ 11.909169@3] fb: osd[1] enable: 0 scale:0x0 (HwBinder:2685_2)
  1237. [ 11.909369@3] fb: osd[0] enable: 1 scale:0x10001 (HwBinder:2685_2)
  1238. [ 11.924405@3] fb: free_scale_switch to fb0, mode: 0x10001
  1239. [ 11.926815@3] vout: osd0=> x:0,y:0,w:1920,h:1080
  1240. [ 11.926815@3] osd1=> x:0,y:0,w:18,h:18
  1241. [ 11.932490@3] fb: current vmode=576cvbs, cmd: 0x40000
  1242. [ 11.937704@3] fb: osd[1] set scale, h_scale: ENABLE, v_scale: ENABLE
  1243. [ 11.943776@3] fb: osd[1].scaledata: 1920 720 1080 288
  1244. [ 11.948789@3] fb: osd[1].pandata: 0 0 0 0
  1245. [ 11.995384@1] success set parent gpu_p0_composite rate to 500000000
  1246. [ 12.335375@0] vout: aml_tvout_mode_work: monitor_timeout
  1247. [ 13.535418@1] success set parent gpu_p0_composite rate to 285714285
  1248. [ 13.590871@0] capability: warning: `main' uses 32-bit capabilities (legacy support in use)
  1249. [ 14.759384@1] success set parent gpu_p1_composite rate to 125000000
  1250. [ 14.817551@2] healthd: battery l=100 v=0 t=42.4 h=2 st=2 chg=a
  1251. [ 15.476986@0] early_suspend_state=0
  1252. [ 16.775520@1] healthd: battery l=100 v=0 t=42.4 h=2 st=2 chg=a
  1253. [ 18.014161@2] init: Unable to open '/proc/sys/vm/extra_free_kbytes': No such file or directory
  1254. [ 18.824269@0] random: crng init done
  1255. [ 22.138582@3] dhd_open: Enter ffffffc05ba6e000
  1256. [ 22.138622@3]
  1257. [ 22.138622@3] Dongle Host Driver, version 1.579.77.41.3 (r)
  1258. [ 22.144729@3] wl_android_wifi_on in 1
  1259. [ 22.148325@3] wl_android_wifi_on in 2: g_wifi_on=0
  1260. [ 22.153203@3] wifi_platform_set_power = 1
  1261. [ 22.157154@3] ======== PULL WL_REG_ON(-1) HIGH! ========
  1262. [ 22.162266@3] aml_wifi wifi: [extern_wifi_set_enable] WIFI Disable! 96
  1263. [ 22.397245@3] aml_wifi wifi: [extern_wifi_set_enable] WIFI Enable! 96
  1264. [ 22.418403@0] sdcardfs version 2.0
  1265. [ 22.418437@0] sdcardfs: dev_name -> /data/media
  1266. [ 22.422246@0] sdcardfs: options -> fsuid=1023,fsgid=1023,multiuser,derive_gid,mask=6,userid=0,gid=1015
  1267. [ 22.435800@0] sdcardfs: mnt -> ffffffc052d46e20
  1268. [ 22.435953@0] sdcardfs: mounted on top of /data/media type ext4
  1269. [ 22.441873@0] Remount options were mask=23,gid=9997 for vfsmnt ffffffc052fa43a0.
  1270. [ 22.448540@0] sdcardfs : options - debug:1
  1271. [ 22.452177@0] sdcardfs : options - gid:9997
  1272. [ 22.456276@0] sdcardfs : options - mask:23
  1273. [ 22.460675@0] Remount options were mask=7,gid=9997 for vfsmnt ffffffc052fa4fe0.
  1274. [ 22.467597@0] sdcardfs : options - debug:1
  1275. [ 22.471520@0] sdcardfs : options - gid:9997
  1276. [ 22.475651@0] sdcardfs : options - mask:7
  1277. [ 22.939480@2] sdio_reset_comm():
  1278. [ 22.990166@1] meson-mmc: sdio: clk 200000000 SDR mode tuning start
  1279. [ 22.990992@0] meson-mmc: sdio: rx_tuning_result[0] = 10
  1280. [ 22.996512@0] meson-mmc: sdio: rx_tuning_result[1] = 10
  1281. [ 23.002895@0] meson-mmc: sdio: rx_tuning_result[2] = 10
  1282. [ 23.011121@0] meson-mmc: Tuning transfer error: nmatch=1 tuning_err:0xffffffac
  1283. [ 23.014106@0] meson-mmc: sdio: rx_tuning_result[4] = 10
  1284. [ 23.019425@0] meson-mmc: sdio: best_win_start =4, best_win_size =4
  1285. [ 23.028157@0] meson-mmc: sdio: clock=0x1000245, adjust=0x12000
  1286. [ 23.030634@0] meson-mmc: sdio: clock =0x1000245, delay=0x0, adjust=0x12000
  1287. [ 23.037602@0] sdioh_start: set sd_f2_blocksize 256
  1288. [ 23.057947@1]
  1289. [ 23.057947@1]
  1290. [ 23.057947@1] dhd_bus_devreset: == WLAN ON ==
  1291. [ 23.060422@1] F1 signature read @0x18000000=0x15464345
  1292. [ 23.069698@1] F1 signature OK, socitype:0x1 chip:0x4345 rev:0x6 pkg:0x4
  1293. [ 23.072578@1] DHD: dongle ram size is set to 819200(orig 819200) at 0x198000
  1294. [ 23.079521@1] dhd_bus_set_default_min_res_mask: Unhandled chip id
  1295. [ 23.089809@1] dhd_os_open_image: /vendor/etc/wifi/buildin/config.txt (253 bytes) open success
  1296. [ 23.101096@1] dhd_conf_read_others: ccode = US
  1297. [ 23.101139@1] dhd_conf_read_others: regrev = 988
  1298. [ 23.105235@1] dhd_conf_read_others: mimo_bw_cap = 1
  1299. [ 23.110088@1] dhd_conf_read_nv_by_chip: nv_by_chip_count=8
  1300. [ 23.115075@1] dhd_conf_read_nv_by_chip: chip=0xa9a6, chiprev=0, name=nvram_ap6212.txt
  1301. [ 23.126197@1] dhd_conf_read_nv_by_chip: chip=0xa9a6, chiprev=1, name=nvram_ap6212a.txt
  1302. [ 23.130507@1] dhd_conf_read_nv_by_chip: chip=0xa9a6, chiprev=2, name=nvram_ap6236.txt
  1303. [ 23.138895@1] dhd_conf_read_nv_by_chip: chip=0x4339, chiprev=1, name=nvram_ap6335.txt
  1304. [ 23.146228@1] dhd_conf_read_nv_by_chip: chip=0x4345, chiprev=6, name=nvram_ap6255.txt
  1305. [ 23.153875@1] dhd_conf_read_nv_by_chip: chip=0x4345, chiprev=9, name=nvram_ap6256.txt
  1306. [ 23.163678@1] dhd_conf_read_nv_by_chip: chip=0x4354, chiprev=2, name=nvram_ap6356.txt
  1307. [ 23.169459@1] dhd_conf_read_nv_by_chip: chip=0x4359, chiprev=9, name=nvram_ap6398.txt
  1308. [ 23.177115@1] Final fw_path=/vendor/etc/wifi/43458/fw_bcm43455c0_ag.bin
  1309. [ 23.183651@1] Final nv_path=/vendor/etc/wifi/buildin/nvram_ap6255.txt
  1310. [ 23.189937@1] Final clm_path=/vendor/etc/wifi/43458/clm_bcmdhd.blob
  1311. [ 23.196237@1] Final conf_path=/vendor/etc/wifi/buildin/config.txt
  1312. [ 23.202264@1] dhd_set_bus_params: set use_rxchain 0
  1313. [ 23.207266@1] dhd_set_bus_params: set txglomsize 36
  1314. [ 23.218381@1] dhd_os_open_image: /vendor/etc/wifi/43458/fw_bcm43455c0_ag.bin (543173 bytes) open success
  1315. [ 23.387927@1] dhd_os_open_image: /vendor/etc/wifi/buildin/nvram_ap6255.txt (1484 bytes) open success
  1316. [ 23.399668@1] NVRAM version: Cloned from bcm94345wlselg.txt
  1317. [ 23.406357@0] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
  1318. [ 23.485978@1] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
  1319. [ 23.486688@1] bcmsdh_oob_intr_register HW_OOB irq=132 flags=0x8
  1320. [ 23.492953@1] meson_pinctrl: gpio virq[132] connect to GIC hwirq[98]
  1321. [ 23.501599@1] bcmsdh_oob_intr_register: enable_irq_wake failed with -6
  1322. [ 23.507731@1] dhd_get_memdump_info: File [/data/misc/wifi/.memdump.info] doesn't exist
  1323. [ 23.514151@1] dhd_get_memdump_info: MEMDUMP ENABLED = 2
  1324. [ 23.521891@1] Disable tdls_auto_op failed. -1
  1325. [ 23.524127@1] dhd_preinit_ioctls: Set tcpack_sup_mode 0
  1326. [ 23.528666@1] dhd_tcpack_suppress_set 352: already set to 0
  1327. [ 23.559816@1] wifi_platform_get_mac_addr
  1328. [ 23.559853@1] ======== dhd_wlan_get_mac_addr ========
  1329. [ 23.569545@1] dhd_apply_default_clm: Ignore clm file /vendor/etc/wifi/43458/clm_bcmdhd.blob
  1330. [ 23.580724@2] Firmware up: op_mode=0x0005, MAC=c8:28:32:2b:0a:26
  1331. [ 23.581140@2] dhd_conf_set_country: set country US, revision 988
  1332. [ 23.609586@2] Country code: US (US/988)
  1333. [ 23.611166@2] dhd_conf_set_intiovar: set roam_off 1
  1334. [ 23.623486@2] dhd_conf_set_intiovar: set mimo_bw_cap 1
  1335. [ 23.645994@0] Driver: 1.579.77.41.3 (r)
  1336. [ 23.645994@0] Firmware: wl0: Dec 28 2015 12:23:25 version 7.45.77.m2 (r2285) FWID 01-f3d72dc5
  1337. [ 23.645994@0] CLM: 7.14.8
  1338. [ 23.673948@0] dhd_txglom_enable: enable 1
  1339. [ 23.673987@0] dhd_conf_set_txglom_params: txglomsize=36, deferred_tx_len=0, bus_txglom=-1
  1340. [ 23.684013@0] dhd_conf_set_txglom_params: tx_in_rx=1, txinrx_thres=-1, dhd_txminmax=1
  1341. [ 23.689953@0] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=5
  1342. [ 23.695393@0] sdioh_set_mode: set txglom_mode to copy
  1343. [ 23.712503@0] dhd_conf_get_disable_proptx: fw_proptx=1, disable_proptx=-1
  1344. [ 23.727645@0] dhd_wlfc_hostreorder_init(): successful bdcv2 tlv signaling, 64
  1345. [ 23.731413@3] type=1400 audit(1483228815.000:4): avc: denied { read } for pid=2784 comm="applypatch" name="recovery" dev="tmpfs" ino=10670 scontext=u:r:install_recovery:s0 tcontext=u:object_r:block_device:s0 tclass=blk_file permissive=0
  1346. [ 23.731440@3] type=1400 audit(1483228828.588:5): avc: denied { read } for pid=3022 comm="main" name="libavenhancements.so" dev="dm-0" ino=433 scontext=u:r:webview_zygote:s0 tcontext=u:object_r:vendor_file:s0 tclass=file permissive=0
  1347. [ 23.774927@0] dhd_conf_set_intiovar: set ampdu_hostreorder 1
  1348. [ 23.796102@0] dhd_pno_init: Support Android Location Service
  1349. [ 23.815238@0] CFG80211-ERROR) wl_cfg80211_event : Event handler is not created
  1350. [ 23.819255@0] rtt_do_get_ioctl: failed to send getbuf proxd iovar (CMD ID : 1), status=-23
  1351. [ 23.836885@0] dhd_rtt_init : FTM is not supported
  1352. [ 23.838785@0] dhd_preinit_ioctls: SensorHub diabled 0
  1353. [ 23.842353@0] dhd_preinit_ioctls failed to set ShubHub disable
  1354. [ 23.849339@0] dhd_ndo_get_version: failed, retcode = -23
  1355. [ 23.859215@2] wl_android_wifi_on: Success
  1356. [ 23.910813@0] dhd_open: Exit ret=0
  1357. [ 24.310060@2] P2P interface registered
  1358. [ 24.310102@2] wl_cfgp2p_add_p2p_disc_if: wdev: ffffffc050a68400, wdev->net: (null)
  1359. [ 24.355377@2] WLC_E_IF: NO_IF set, event Ignored
  1360. [ 24.360226@1] P2P interface started
  1361. [ 24.432543@2] Random MAC OUI to be used - da:a1:19
  1362. [ 24.437868@2] WLDEV-INFO) wldev_set_country: Current country US rev 988
  1363. [ 24.478824@0] wldev_set_country: set country for US as US rev 0
  1364. [ 24.525403@2] dhd_dbg_attach_pkt_monitor, 1606
  1365. [ 24.529634@2] net_os_enable_packet_filter: val = 0
  1366. [ 24.530410@2] net_os_rxfilter_add_remove: add_remove = 0, num = 2
  1367. [ 24.536715@2] net_os_enable_packet_filter: val = 1
  1368. [ 24.542302@2] net_os_enable_packet_filter: val = 0
  1369. [ 24.556104@2] net_os_rxfilter_add_remove: add_remove = 0, num = 3
  1370. [ 24.560400@2] net_os_enable_packet_filter: val = 1
  1371. [ 24.563167@2] dhd_set_suspend: Remove extra suspend setting
  1372. [ 24.568257@2] dhd_enable_packet_filter: enter, value = 0
  1373. [ 30.562969@3] BT_RADIO going: on
  1374. [ 30.562999@3] BCM_BT: going ON
  1375. [ 30.980615@3] meson_uart c11084c0.serial: ttyS1 use clk81 166666667 change 0 to 9600
  1376. [ 30.983219@0] meson_uart c11084c0.serial: ttyS1 use clk81 166666667 change 9600 to 9600
  1377. [ 30.991415@1] meson_uart c11084c0.serial: ttyS1 use clk81 166666667 change 9600 to 115200
  1378. [ 31.007999@1] meson_uart c11084c0.serial: ttyS1 use clk81 166666667 change 115200 to 2000000
  1379. [ 31.379402@1] meson_uart c11084c0.serial: ttyS1 use clk81 166666667 change 2000000 to 115200
  1380. [ 31.602025@2] meson_uart c11084c0.serial: ttyS1 use clk81 166666667 change 115200 to 2000000
  1381. [ 37.386795@1] success set parent gpu_p0_composite rate to 744000000
  1382. [ 37.642008@3] wl_run_escan: LEGACY_SCAN sync ID: 0, bssidx: 0
  1383. [ 38.158452@0] type=1400 audit(1483228828.592:6): avc: denied { read } for pid=3022 comm="main" name="libavenhancements.so" dev="dm-0" ino=433 scontext=u:r:webview_zygote:s0 tcontext=u:object_r:vendor_file:s0 tclass=file permissive=0
  1384. [ 38.179622@0] type=1400 audit(1483228843.016:7): avc: denied { open } for pid=3346 comm="SoundPoolThread" path="/dev/__properties__/u:object_r:media_prop:s0" dev="tmpfs" ino=11443 scontext=u:r:priv_app:s0:c512,c768 tcontext=u:object_r:media_prop:s0 tclass=file permissive=0
  1385. [ 38.276825@2] success set parent gpu_p1_composite rate to 666666666
  1386. [ 38.524257@3] type=1400 audit(1483228843.384:16): avc: denied { open } for pid=3346 comm="SoundPoolThread" path="/dev/__properties__/u:object_r:media_prop:s0" dev="tmpfs" ino=11443 scontext=u:r:priv_app:s0:c512,c768 tcontext=u:object_r:media_prop:s0 tclass=file permissive=0 duplicate messages suppressed
  1387. [ 38.557782@3] type=1400 audit(1483228843.384:17): avc: denied { search } for pid=2689 comm="[email protected]" name="2674" dev="proc" ino=2440 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_allocator_default:s0 tclass=dir permissive=0
  1388. [ 38.593110@1] type=1400 audit(1483228843.384:17): avc: denied { search } for pid=2689 comm="[email protected]" name="2674" dev="proc" ino=2440 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_allocator_default:s0 tclass=dir permissive=0
  1389. [ 38.609242@1] type=1400 audit(1483228843.408:18): avc: denied { open } for pid=3346 comm="SoundPoolThread" path="/dev/__properties__/u:object_r:media_prop:s0" dev="tmpfs" ino=11443 scontext=u:r:priv_app:s0:c512,c768 tcontext=u:object_r:media_prop:s0 tclass=file permissive=0
  1390. [ 38.633353@1] type=1400 audit(1483228843.408:18): avc: denied { open } for pid=3346 comm="SoundPoolThread" path="/dev/__properties__/u:object_r:media_prop:s0" dev="tmpfs" ino=11443 scontext=u:r:priv_app:s0:c512,c768 tcontext=u:object_r:media_prop:s0 tclass=file permissive=0
  1391. [ 38.656914@1] type=1400 audit(1483228843.456:19): avc: denied { read } for pid=2689 comm="[email protected]" name="status" dev="proc" ino=27769 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_bluetooth_default:s0 tclass=file permissive=0
  1392. [ 38.678229@1] type=1400 audit(1483228843.456:19): avc: denied { read } for pid=2689 comm="[email protected]" name="status" dev="proc" ino=27769 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_bluetooth_default:s0 tclass=file permissive=0
  1393. [ 38.683434@2] success set parent gpu_p0_composite rate to 500000000
  1394. [ 38.705460@1] type=1400 audit(1483228843.508:20): avc: denied { open } for pid=3346 comm=4E444B204D65646961436F6465635F path="/dev/__properties__/u:object_r:media_prop:s0" dev="tmpfs" ino=11443 scontext=u:r:priv_app:s0:c512,c768 tcontext=u:object_r:media_prop:s0 tclass=file permissive=0
  1395. [ 40.491498@3] success set parent gpu_p1_composite rate to 400000000
  1396. [ 41.307399@3] success set parent gpu_p0_composite rate to 285714285
  1397. [ 41.531670@2] Connecting with bc:ee:7b:7a:94:10 ssid "hal-beta", len (8) channel=10
  1398. [ 41.531670@2]
  1399. [ 41.535390@2] dhd_dbg_start_pkt_monitor, 1724
  1400. [ 41.544874@2] __dhd_dbg_free_tx_pkts, 1518
  1401. [ 41.544903@2] __dhd_dbg_free_rx_pkts, 1536
  1402. [ 41.597367@2] wl_iw_event: Link UP with BSSID=bc:ee:7b:7a:94:10
  1403. [ 41.597761@2] wl_bss_connect_done succeeded with bc:ee:7b:7a:94:10
  1404. [ 41.642726@2] wl_bss_connect_done succeeded with bc:ee:7b:7a:94:10 vndr_oui: 00-10-18
  1405. [ 41.686711@0] dhd_dev_apf_get_version: firmware doesn't support APF
  1406. [ 41.687584@0] dhd_dev_apf_get_max_len: firmware doesn't support APF
  1407. [ 41.768748@3] dhd_ndo_remove_ip_by_type: failed, retcode = -23
  1408. [ 41.768948@3] dhd_dev_ndo_cfg: failed to update host ip addr: -23
  1409. [ 41.778892@3] CFG80211-ERROR) wl_cfgvendor_configure_nd_offload : dhd_dev_ndo_cfg() failed: -23
  1410. [ 41.790398@0] net_os_enable_packet_filter: val = 0
  1411. [ 41.791255@3] net_os_rxfilter_add_remove: add_remove = 1, num = 2
  1412. [ 41.800631@3] net_os_enable_packet_filter: val = 1
  1413. [ 41.947998@3] dhd_set_suspend: Remove extra suspend setting
  1414. [ 41.948043@3] dhd_enable_packet_filter: enter, value = 0
  1415. [ 42.467414@3] success set parent gpu_p1_composite rate to 666666666
  1416. [ 42.877183@3] success set parent gpu_p0_composite rate to 500000000
  1417. [ 44.808790@1] audio_dsp: drc high cut scale set to 100%
  1418. [ 44.809567@1] audio_dsp: drc low boost scale set to 100%
  1419. [ 44.815151@1] audio_dsp: drc mode set to LINE
  1420. [ 45.033435@3] binder: 3662:3672 DecRefs 0 refcount change on invalid ref 42 ret -22
  1421. [ 45.143701@2] success set parent gpu_p1_composite rate to 400000000
  1422. [ 46.985705@1] net_os_enable_packet_filter: val = 0
  1423. [ 46.986436@1] net_os_rxfilter_add_remove: add_remove = 0, num = 2
  1424. [ 47.006126@2] net_os_enable_packet_filter: val = 1
  1425. [ATOS] TDK-v2.4
  1426. [ATOS] TA verified (2048-2048)
  1427. [ATOS] *WARNING* TA Version Table not ready!
  1428. open widevinekeybox, ret f0100003
  1429. Extend func 31 not supported
  1430. open widevinekeybox, ret f0100003
  1431. Extend func 31 not supported
  1432. [ATOS] TDK-v2.4
  1433. [ATOS] TA verified (2048-2048)
  1434. [ATOS] *WARNING* TA Version Table not ready!
  1435. open widevinekeybox, ret f0100003
  1436. Extend func 31 not supported
  1437. open widevinekeybox, ret f0100003
  1438. Extend func 31 not supported
  1439. Extend func 31 not supported
  1440. [ATOS] TDK-v2.4
  1441. [ATOS] TA verified (2048-2048)
  1442. [ATOS] *WARNING* TA Version Table not ready!
  1443. open widevinekeybox, ret f0100003
  1444. Extend func 31 not supported
  1445. open widevinekeybox, ret f0100003
  1446. Extend func 31 not supported
  1447. [ATOS] TDK-v2.4
  1448. Extend func 31 not supported
  1449. [ATOS] TA verified (2048-2048)
  1450. [ATOS] *WARNING* TA Version Table not ready!
  1451. open widevinekeybox, ret f0100003
  1452. Extend func 31 not supported
  1453. open widevinekeybox, ret f0100003
  1454. Extend func 31 not supported
  1455. Extend func 31 not supported
  1456. [ATOS] TDK-v2.4
  1457. [ATOS] TA verified (2048-2048)
  1458. [ATOS] *WARNING* TA Version Table not ready!
  1459. open widevinekeybox, ret f0100003
  1460. Extend func 31 not supported
  1461. open widevinekeybox, ret f0100003
  1462. Extend func 31 not supported
  1463. [ATOS] TDK-v2.4
  1464. [ATOS] TA verified (2048-2048)
  1465. [ATOS] *WARNING* TA Version Table not ready!
  1466. open widevinekeybox, ret f0100003
  1467. Extend func 31 not supported
  1468. open widevinekeybox, ret f0100003
  1469. Extend func 31 not supported
  1470. Extend func 31 not supported
  1471. [ATOS] TDK-v2.4
  1472. [ATOS] TA verified (2048-2048)
  1473. [ATOS] *WARNING* TA Version Table not ready!
  1474. open widevinekeybox, ret f0100003
  1475. Extend func 31 not supported
  1476. open widevinekeybox, ret f0100003
  1477. Extend func 31 not supported
  1478. [ATOS] TDK-v2.4
  1479. [ATOS] TA verified (2048-2048)
  1480. [ATOS] *WARNING* TA Version Table not ready!
  1481. open widevinekeybox, ret f0100003
  1482. Extend func 31 not supported
  1483. [ 49.503375@1] success set parent gpu_p0_composite rate to 285714285
  1484. open widevinekeybox, ret f0100003
  1485. Extend func 31 not supported
  1486. [ATOS] TDK-v2.4
  1487. [ATOS] TA verified (2048-2048)
  1488. [ATOS] *WARNING* TA Version Table not ready!
  1489. open widevinekeybox, ret f0100003
  1490. Extend func 31 not supported
  1491. open widevinekeybox, ret f0100003
  1492. Extend func 31 not supported
  1493. [ATOS] TDK-v2.4
  1494. [ATOS] TA verified (2048-2048)
  1495. [ATOS] *WARNING* TA Version Table not ready!
  1496. open widevinekeybox, ret f0100003
  1497. Extend func 31 not supported
  1498. open widevinekeybox, ret f0100003
  1499. Extend func 31 not supported
  1500. Extend func 31 not supported
  1501. set ta time 1546184058
  1502. [ATOS] TDK-v2.4
  1503. [ATOS] TA verified (2048-2048)
  1504. [ATOS] *WARNING* TA Version Table not ready!
  1505. open widevinekeybox, ret f0100003
  1506. Extend func 31 not supported
  1507. open widevinekeybox, ret f0100003
  1508. Extend func 31 not supported
  1509. [ATOS] TDK-v2.4
  1510. [ATOS] TA verified (2048-2048)
  1511. [ATOS] *WARNING* TA Version Table not ready!
  1512. open widevinekeybox, ret f0100003
  1513. Extend func 31 not supported
  1514. open widevinekeybox, ret f0100003
  1515. Extend func 31 not supported
  1516. Extend func 31 not supported
  1517. [ATOS] TDK-v2.4
  1518. [ATOS] TA verified (2048-2048)
  1519. [ATOS] *WARNING* TA Version Table not ready!
  1520. open widevinekeybox, ret f0100003
  1521. Extend func 31 not supported
  1522. open widevinekeybox, ret f0100003
  1523. Extend func 31 not supported
  1524. Extend func 31 not supported
  1525. [ATOS] TDK-v2.4
  1526. [ATOS] TA verified (2048-2048)
  1527. [ATOS] *WARNING* TA Version Table not ready!
  1528. open widevinekeybox, ret f0100003
  1529. Extend func 31 not supported
  1530. open widevinekeybox, ret f0100003
  1531. Extend func 31 not supported
  1532. [ 52.119408@2] type=1400 audit(1483228844.832:34): avc: denied { search } for pid=2689 comm="[email protected]" name="3194" dev="proc" ino=16227 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:hal_wifi_supplicant_default:s0 tclass=dir permissive=0
  1533. [ 52.331410@2] type=1400 audit(1546184060.740:35): avc: denied { read } for pid=3938 comm="Thread-28" name="u:object_r:net_dns_prop:s0" dev="tmpfs" ino=11469 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:net_dns_prop:s0 tclass=file permissive=0
  1534. [ATOS] TDK-v2.4
  1535. [ATOS] TA verified (2048-2048)
  1536. [ATOS] *WARNING* TA Version Table not ready!
  1537. open widevinekeybox, ret f0100003
  1538. Extend func 31 not supported
  1539. open widevinekeybox, ret f0100003
  1540. Extend func 31 not supported
  1541. [ATOS] TDK-v2.4
  1542. [ATOS] TA verified (2048-2048)
  1543. [ATOS] *WARNING* TA Version Table not ready!
  1544. open widevinekeybox, ret f0100003
  1545. Extend func 31 not supported
  1546. open widevinekeybox, ret f0100003
  1547. Extend func 31 not supported
  1548. Extend func 31 not supported
  1549. [ATOS] TDK-v2.4
  1550. [ATOS] TA verified (2048-2048)
  1551. [ATOS] *WARNING* TA Version Table not ready!
  1552. open widevinekeybox, ret f0100003
  1553. Extend func 31 not supported
  1554. open widevinekeybox, ret f0100003
  1555. Extend func 31 not supported
  1556. [ 53.096383@0] binder: 4767:4778 DecRefs 0 refcount change on invalid ref 13 ret -22
  1557. [ATOS] TDK-v2.4
  1558. [ATOS] TA verified (2048-2048)
  1559. [ATOS] *WARNING* TA Version Table not ready!
  1560. open widevinekeybox, ret f0100003
  1561. Extend func 31 not supported
  1562. open widevinekeybox, ret f0100003
  1563. Extend func 31 not supported
  1564. [ATOS] TDK-v2.4
  1565. [ATOS] TA verified (2048-2048)
  1566. [ATOS] *WARNING* TA Version Table not ready!
  1567. open widevinekeybox, ret f0100003
  1568. Extend func 31 not supported
  1569. open widevinekeybox, ret f0100003
  1570. Extend func 31 not supported
  1571. [ATOS] TDK-v2.4
  1572. [ATOS] TA verified (2048-2048)
  1573. [ATOS] *WARNING* TA Version Table not ready!
  1574. open widevinekeybox, ret f0100003
  1575. Extend func 31 not supported
  1576. open widevinekeybox, ret f0100003
  1577. Extend func 31 not supported
  1578. [ATOS] TDK-v2.4
  1579. [ATOS] TA verified (2048-2048)
  1580. [ATOS] *WARNING* TA Version Table not ready!
  1581. open widevinekeybox, ret f0100003
  1582. Extend func 31 not supported
  1583. open widevinekeybox, ret f0100003
  1584. Extend func 31 not supported
  1585. [ATOS] TDK-v2.4
  1586. [ATOS] TA verified (2048-2048)
  1587. [ATOS] *WARNING* TA Version Table not ready!
  1588. open widevinekeybox, ret f0100003
  1589. Extend func 31 not supported
  1590. open widevinekeybox, ret f0100003
  1591. Extend func 31 not supported
  1592. [ATOS] TDK-v2.4
  1593. [ATOS] TA verified (2048-2048)
  1594. [ATOS] *WARNING* TA Version Table not ready!
  1595. open widevinekeybox, ret f0100003
  1596. Extend func 31 not supported
  1597. open widevinekeybox, ret f0100003
  1598. Extend func 31 not supported
  1599. [ATOS] TDK-v2.4
  1600. [ATOS] TA verified (2048-2048)
  1601. [ATOS] *WARNING* TA Version Table not ready!
  1602. [ 54.275909@2] success set parent gpu_p1_composite rate to 125000000
  1603. open widevinekeybox, ret f0100003
  1604. Extend func 31 not supported
  1605. open widevinekeybox, ret f0100003
  1606. Extend func 31 not supported
  1607. [ATOS] TDK-v2.4
  1608. [ATOS] TA verified (2048-2048)
  1609. [ATOS] *WARNING* TA Version Table not ready!
  1610. open widevinekeybox, ret f0100003
  1611. Extend func 31 not supported
  1612. open widevinekeybox, ret f0100003
  1613. Extend func 31 not supported
  1614. Extend func 31 not supported
  1615. [ 62.671864@0] fb: mem_free_work, free memory: addr:800000
  1616. [ 63.055719@3] binder_alloc: 3542: binder_alloc_buf size 1056768 failed, no address space
  1617. [ 63.058164@3] binder_alloc: allocated: 6464 (num: 13 largest: 2128), free: 1033920 (num: 3 largest: 1033688)
  1618. [ 63.067952@3] binder: 3589:5238 transaction failed 29201/-28, size 1056768-0 line 3116
  1619. [ 63.075787@3] binder: send failed reply for transaction 100639 to 3542:3811
  1620. [ 76.831417@3] success set parent gpu_p0_composite rate to 666666666
  1621. [ 77.239429@3] success set parent gpu_p1_composite rate to 500000000
  1622. [ 87.051538@1] success set parent gpu_p0_composite rate to 400000000
  1623. [ 91.719555@2] success set parent gpu_p1_composite rate to 285714285
  1624. [ 101.446396@0] dhd_dbg_monitor_get_tx_pkts, 2017
  1625. [ 101.446463@0] dhd_dbg_monitor_get_tx_pkts(): no tx_status in tx completion messages, make sure that 'd11status' is enabled in firmware, status_pos=0
  1626. [ 101.461627@3] dhd_dbg_monitor_get_rx_pkts, 2115
  1627. [ 117.487610@1] success set parent gpu_p0_composite rate to 125000000
  1628. [ 145.807884@0] hdmitx: system: irq 2
  1629. [ 146.319774@0] hdmitx: plugin
  1630. [ 146.544498@0] EDID Parser:
  1631. [ 146.544534@0] hdmitx: get dtd0 vic: 16
  1632. [ 146.545297@0] dump_dtd_info[1708]
  1633. [ 146.548595@0] pixel_clock 8550
  1634. [ 146.551620@0] h_active 1366
  1635. [ 146.554360@0] h_blank 426
  1636. [ 146.556973@0] v_active 768
  1637. [ 146.559627@0] v_blank 30
  1638. [ 146.562130@0] h_sync_offset 70
  1639. [ 146.565365@0] h_sync 143
  1640. [ 146.567669@0] v_sync_offset 3
  1641. [ 146.570565@0] v_sync 3
  1642. [ 146.572925@0] dump_dtd_info[1708]
  1643. [ 146.576206@0] pixel_clock 7425
  1644. [ 146.579190@0] h_active 1920
  1645. [ 146.581978@0] h_blank 720
  1646. [ 146.584623@0] v_active 540
  1647. [ 146.587215@0] v_blank 22
  1648. [ 146.589746@0] h_sync_offset 528
  1649. [ 146.592851@0] h_sync 44
  1650. [ 146.595234@0] v_sync_offset 2
  1651. [ 146.598173@0] v_sync 5
  1652. [ 146.600502@0] hdmitx: edid: find IEEEOUT
  1653. [ 146.604479@0]
  1654. [ 146.606015@0] hdmitx: edid: check sum valid
  1655. [ 146.610163@0] hdmitx: edid: check sum valid
  1656. [ 146.614305@0] hdmitx: edid: check sum valid
  1657. [ 146.618442@0] hdmitx: edid: check sum valid
  1658. [ 146.622597@0] hdmitx: edid: blk0 raw data
  1659. [ 146.626625@0] 00ffffffffffff004c2d7a0a000000002e160103804627780aee91a3544c9926
  1660. [ 146.626625@0] 0f5054bdef80714f81c0810081809500a9c0b3000101023a801871382d40582c
  1661. [ 146.626625@0] 450024724200001e662156aa51001e30468f330024724200001e000000fd0018
  1662. [ 146.626625@0] 4b0f5117000a202020202020000000fc0053414d53554e470a20202020200189
  1663. [ 146.626625@0]
  1664. [ 146.626625@0]
  1665. [ 146.658571@0] hdmitx: edid: blk1 raw data
  1666. [ 146.662463@0] 020325f14d901f04130514031220212207162309070783010000e2000f67030c
  1667. [ 146.662463@0] 002000b82d011d80d0721c1620102c258024724200009e011d8018711c162058
  1668. [ 146.662463@0] 2c250024724200009e011d00bc52d01e20b828554024724200001e011d007251
  1669. [ 146.662463@0] d01e206e28550024724200001e8c0ad090204031200c4055002472420000182c
  1670. [ 146.662463@0]
  1671. [ 146.662463@0]
  1672. [ 146.694518@0] hdmitx: edid: get edid successful at first time
  1673. [ 146.702291@0] hdmitx: video: get current mode: 576cvbs
  1674. [ 146.705224@0] hdmitx: update physcial size: 700 390
  1675. [ 146.709968@0] hdmitx: video: 576cvbs not valid hdmi mode
  1676. [ 146.715229@0] config: hdmitx: unknown cmd: 0x14000000
  1677. [ 146.720241@0] hdmtix: set audio
  1678. [ 146.723329@0] hdmitx tx_aud_src = 0
  1679. [ 146.726834@0] hdmitx: fs = 3, cd = 4, tmds_clk = 0
  1680. [ 146.731530@0] hdmitx aud_n_para = 6144
  1681. [ 146.735228@0] hdmitx set channel status
  1682. [ 146.739085@0] hdmitx: audio: Audio Type: PCM
  1683. [ 146.745643@3] avmute set to 2
  1684. [ 146.746300@3] set hdcp_pwr 1
  1685. [ 146.791768@3] restore hdcp_pwr 0
  1686. [ 146.791898@3] amhdmitx amhdmitx0: hdmitx20: stop14
  1687. [ 146.794245@3] amhdmitx amhdmitx0: hdmitx20: stop22
  1688. [ 146.805512@3] sname = 1080p60hz
  1689. [ 146.805542@3] char_clk = 148500
  1690. [ 146.806139@3] cd = 5
  1691. [ 146.808365@3] cs = 2
  1692. [ 146.810724@3] RX tmds clk: 225 Calc clk: 185
  1693. [ 146.815200@3] vout: vmode set to null
  1694. [ 146.819137@3] fb: current vmode=576cvbs, cmd: 0x10000
  1695. [ 146.823509@3] hdmitx_set_current_vmode[2456]
  1696. [ 146.827737@3] hdmitx: video: get current mode: null
  1697. [ 146.832556@3] hdmitx: update physcial size: 700 390
  1698. [ 146.837374@3] hdmitx: video: null not valid hdmi mode
  1699. [ 146.842389@3] config: hdmitx: unknown cmd: 0x14000000
  1700. [ 146.847415@3]
  1701. [ 146.847415@3] vdac_enable: on:0,module_sel:8
  1702. [ 146.853286@3] vout: new mode null set ok
  1703. [ 146.857135@3] fb: current vmode=null, cmd: 0x20000
  1704. [ 146.861879@3] fb: logo changed, return!
  1705. [ 146.920351@3] vout: vmode set to 1080p60hz
  1706. [ 146.920535@3] fb: current vmode=1080p60hz, cmd: 0x10000
  1707. [ 146.924038@3] hdmitx_set_current_vmode[2456]
  1708. [ 146.928252@3] hdmitx: video: get current mode: 1080p60hz
  1709. [ 146.933495@3] hdmitx: update rx hdr info 0
  1710. [ 146.937556@3] hdmitx: update physcial size: 700 390
  1711. [ 146.942446@3] config: hdmitx: unknown cmd: 0x14000000
  1712. [ 146.947419@3] hdmitx: system: already init VIC = 0 Now VIC = 16
  1713. [ 146.953350@3] hdmitx div40: 0
  1714. [ 146.983319@3] hdmitx: system: set pll
  1715. [ 146.983355@3] hdmitx: system: param->VIC:16
  1716. [ 146.985500@3] hdmitx: set clk: VIC = 16 cd = 5 frac_rate = 1
  1717. [ 146.991324@3] config HPLL = 3712500
  1718. [ 146.994790@3] HPLL: 0x4000029a
  1719. [ 146.997774@3] config HPLL done
  1720. [ 147.000783@3] set_hpll_od3_clk_div[456] div = 8
  1721. [ 147.005271@3] j = 4 vid_clk_div = 1
  1722. [ 147.008829@3] hdmitx: set enc for VIC: 16
  1723. [ 147.012943@3] HDMITX-DWC addr=0x10004006 rd_data=0x4c
  1724. [ 147.017788@3] Error: HDMITX-DWC exp_data=0xff mask=0x9f
  1725. [ 147.151330@0] hdmitx: system: irq 80000001
  1726. [ 147.151379@0] Start = 0x10000100 End = 0x100001ff
  1727. [ 147.154739@0] [0x10000104]: 0x00000001
  1728. [ 147.155334@3] Sink is HDMI device
  1729. [ 147.155382@3] 1080p60hz 60 1
  1730. [ 147.155389@3] 1080p60hz 2997 50
  1731. [ 147.155392@3] hdmtix: set audio
  1732. [ 147.155401@3] hdmitx tx_aud_src = 0
  1733. [ 147.155425@3] hdmitx: fs = 3, cd = 5, tmds_clk = 148352
  1734. [ 147.155429@3] hdmitx aud_n_para = 5824
  1735. [ 147.155444@3] hdmitx set channel status
  1736. [ 147.155493@3] hdmitx: audio: Audio Type: PCM
  1737. [ 147.155512@3]
  1738. [ 147.155512@3] vdac_enable: on:0,module_sel:8
  1739. [ 147.155524@3] vout: new mode 1080p60hz set ok
  1740. [ 147.155530@3] fb: current vmode=1080p60hz, cmd: 0x20000
  1741. [ 147.155534@3] fb: logo changed, return!
  1742. [ 147.211006@0] [0x10000180]: 0x000000ff
  1743. [ 147.211011@0] [0x10000181]: 0x000000ff
  1744. [ 147.211014@0] [0x10000182]: 0x00000003
  1745. [ 147.211016@0] [0x10000183]: 0x00000007
  1746. [ 147.211019@0] [0x10000184]: 0x0000003f
  1747. [ 147.211022@0] [0x10000185]: 0x00000002
  1748. [ 147.211026@0] [0x10000187]: 0x000000ff
  1749. [ 147.211029@0] [0x10000188]: 0x00000003
  1750. [ 147.244247@1] vout: osd0=> x:0,y:0,w:1920,h:1080
  1751. [ 147.244247@1] osd1=> x:0,y:0,w:18,h:18
  1752. [ 147.251636@1] fb: current vmode=1080p60hz, cmd: 0x40000
  1753. [ 147.269417@1] fb: osd[1] set scale, h_scale: DISABLE, v_scale: DISABLE
  1754. [ 147.270300@1] fb: osd[1].scaledata: 1920 1920 1080 1080
  1755. [ 147.275609@1] fb: osd[1].pandata: 0 0 0 0
  1756. [ 147.286056@1] vout: vout_io_open
  1757. [ 147.286098@1] vout: vout_ioctl: cmd_dir = 0x2, cmd_nr = 0x0
  1758. [ 147.289273@1] vout: vout_io_release
  1759. [ 147.302968@1] vout: osd0=> x:0,y:0,w:1920,h:1080
  1760. [ 147.302968@1] osd1=> x:0,y:0,w:18,h:18
  1761. [ 147.305708@1] fb: current vmode=1080p60hz, cmd: 0x40000
  1762. [ 147.319646@1] fb: osd[1] set scale, h_scale: DISABLE, v_scale: DISABLE
  1763. [ 147.320536@1] fb: osd[1].scaledata: 1920 1920 1080 1080
  1764. [ 147.325836@1] fb: osd[1].pandata: 0 0 0 0
  1765. [ 147.336081@2] vout: vout_io_open
  1766. [ 147.336127@2] vout: vout_ioctl: cmd_dir = 0x2, cmd_nr = 0x0
  1767. [ 147.339318@2] vout: vout_io_release
  1768. [ 147.399680@3] avmute set to 1
  1769. [ 147.402245@2] hdmitx: ddc rd8b error 0x3a 0x50
  1770. [ 147.404296@2] hdmitx: ddc rd8b error 0x3a 0x50
  1771. [ 147.406073@2] set hdcp_pwr 1
  1772. [ 147.449787@2] restore hdcp_pwr 0
  1773. [ 147.449890@2] amhdmitx amhdmitx0: hdmitx20: stop14
  1774. [ 147.452281@2] amhdmitx amhdmitx0: hdmitx20: stop22
  1775. [ 147.459176@2] hdcp: set mode as 1
  1776. [ 147.460677@0] hdmitx: system: irq 80000001
  1777. [ 147.464324@0] Start = 0x10000100 End = 0x100001ff
  1778. [ 147.469090@0] [0x10000104]: 0x00000001
  1779. [ 147.472921@0] [0x10000180]: 0x000000ff
  1780. [ 147.475283@2] hdcp14: instat: 0x11
  1781. [ 147.479881@0] [0x10000181]: 0x000000ff
  1782. [ 147.483567@0] [0x10000182]: 0x00000003
  1783. [ 147.487330@0] [0x10000183]: 0x00000007
  1784. [ 147.490954@0] [0x10000184]: 0x0000003f
  1785. [ 147.494719@0] [0x10000185]: 0x00000002
  1786. [ 147.500993@0] [0x10000187]: 0x000000ff
  1787. [ 147.502082@0] [0x10000188]: 0x00000003
  1788. [ 151.589527@0] type=1400 audit(1546184060.740:35): avc: denied { read } for pid=3938 comm="Thread-28" name="u:object_r:net_dns_prop:s0" dev="tmpfs" ino=11469 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:net_dns_prop:s0 tclass=file permissive=0
  1789. [ 151.606833@0] type=1400 audit(1546184160.212:36): avc: denied { search } for pid=2689 comm="[email protected]" name="3052" dev="proc" ino=15883 scontext=u:r:hal_memtrack_default:s0 tcontext=u:r:radio:s0 tclass=dir permissive=0
  1790. [ 156.923389@2] success set parent gpu_p1_composite rate to 666666666
  1791. [ 157.331739@2] success set parent gpu_p0_composite rate to 500000000
  1792. [ 165.973796@0] hdmitx: system: irq 80000004
  1793. [ 165.973996@0] hdmitx: plugout
  1794. [ 165.975590@0] hdmitx: clear RX hdr info
  1795. [ 165.985798@1] avmute set to 2
  1796. [ 165.986199@1] set hdcp_pwr 1
  1797. [ 166.028267@1] restore hdcp_pwr 0
  1798. [ 166.028467@1] amhdmitx amhdmitx0: hdmitx20: stop14
  1799. [ 166.030906@1] amhdmitx amhdmitx0: hdmitx20: stop22
  1800. [ 166.055430@0] vout: vmode set to 576cvbs
  1801. [ 166.056043@0] fb: current vmode=1080p60hz, cmd: 0x10000
  1802. [ 166.058929@0] cvbs_out: mode is 1,sync_duration_den=1,sync_duration_num=50
  1803. [ 166.065942@0] cvbs_out: SET cvbs mode:576cvbs(1)
  1804. [ 166.070524@0]
  1805. [ 166.070524@0] vdac_enable: on:0,module_sel:8
  1806. [ 166.076452@0] enc_clk_config: set_vmode_clk start
  1807. [ 166.080937@0] enc_clk_config: set_vmode_clk DONE
  1808. [ 166.085440@0] cvbs_out: cvbs performance type = 6, table = 0
  1809. [ 167.119362@0] cvbs_out: vdac open.0 = 0xb0001, 0x0
  1810. [ 167.119428@0]
  1811. [ 167.119428@0] vdac_enable: on:1,module_sel:8
  1812. [ 167.124895@0] vout: new mode 576cvbs set ok
  1813. [ 167.129001@0] fb: current vmode=576cvbs, cmd: 0x20000
  1814. [ 167.131510@1] success set parent gpu_p1_composite rate to 400000000
  1815. [ 167.139987@0] fb: logo changed, return!
  1816. [ 167.173975@0] hdmitx: system: irq 80000002
  1817. [ 167.182515@0] vout: osd0=> x:0,y:0,w:1920,h:1080
  1818. [ 167.182515@0] osd1=> x:0,y:0,w:18,h:18
  1819. [ 167.185268@0] fb: current vmode=576cvbs, cmd: 0x40000
  1820. [ 167.201832@0] fb: osd[1] set scale, h_scale: ENABLE, v_scale: ENABLE
  1821. [ 167.202557@0] fb: osd[1].scaledata: 1920 720 1080 288
  1822. [ 167.207739@0] fb: osd[1].pandata: 0 0 0 0
  1823. [ 167.221772@0] vout: vout_io_open
  1824. [ 167.221831@0] vout: vout_ioctl: cmd_dir = 0x2, cmd_nr = 0x0
  1825. [ 167.225022@0] vout: vout_io_release
  1826. [ 167.695451@0] hdmitx: plugin
  1827. [ 167.922242@0] EDID Parser:
  1828. [ 167.922278@0] hdmitx: get dtd0 vic: 16
  1829. [ 167.923041@0] dump_dtd_info[1708]
  1830. [ 167.926336@0] pixel_clock 8550
  1831. [ 167.929343@0] h_active 1366
  1832. [ 167.932135@0] h_blank 426
  1833. [ 167.934685@0] v_active 768
  1834. [ 167.937391@0] v_blank 30
  1835. [ 167.939869@0] h_sync_offset 70
  1836. [ 167.942944@0] h_sync 143
  1837. [ 167.945404@0] v_sync_offset 3
  1838. [ 167.948316@0] v_sync 3
  1839. [ 167.950653@0] dump_dtd_info[1708]
  1840. [ 167.953970@0] pixel_clock 7425
  1841. [ 167.956992@0] h_active 1920
  1842. [ 167.959732@0] h_blank 720
  1843. [ 167.962398@0] v_active 540
  1844. [ 167.965006@0] v_blank 22
  1845. [ 167.967572@0] h_sync_offset 528
  1846. [ 167.970562@0] h_sync 44
  1847. [ 167.972989@0] v_sync_offset 2
  1848. [ 167.975918@0] v_sync 5
  1849. [ 167.978238@0] hdmitx: edid: find IEEEOUT
  1850. [ 167.982231@0]
  1851. [ 167.983780@0] hdmitx: edid: check sum valid
  1852. [ 167.987379@1] hdmitx_aud_hpd_plug_handler state:1
  1853. [ 167.992573@0] hdmitx: edid: check sum valid
  1854. [ 167.996707@0] hdmitx: edid: check sum valid
  1855. [ 168.000888@0] hdmitx: edid: check sum valid
  1856. [ 168.005084@0] hdmitx: edid: blk0 raw data
  1857. [ 168.008986@0] 00ffffffffffff004c2d7a0a000000002e160103804627780aee91a3544c9926
  1858. [ 168.008986@0] 0f5054bdef80714f81c0810081809500a9c0b3000101023a801871382d40582c
  1859. [ 168.008986@0] 450024724200001e662156aa51001e30468f330024724200001e000000fd0018
  1860. [ 168.008986@0] 4b0f5117000a202020202020000000fc0053414d53554e470a20202020200189
  1861. [ 168.008986@0]
  1862. [ 168.008986@0]
  1863. [ 168.043651@0] hdmitx: edid: blk1 raw data
  1864. [ 168.044861@0] 020325f14d901f04130514031220212207162309070783010000e2000f67030c
  1865. [ 168.044861@0] 002000b82d011d80d0721c1620102c258024724200009e011d8018711c162058
  1866. [ 168.044861@0] 2c250024724200009e011d00bc52d01e20b828554024724200001e011d007251
  1867. [ 168.044861@0] d01e206e28550024724200001e8c0ad090204031200c4055002472420000182c
  1868. [ 168.044861@0]
  1869. [ 168.044861@0]
  1870. [ 168.076858@0] hdmitx: edid: get edid successful at first time
  1871. [ 168.084577@0] hdmitx: video: get current mode: 576cvbs
  1872. [ 168.087528@0] hdmitx: update physcial size: 700 390
  1873. [ 168.092594@0] hdmitx: video: 576cvbs not valid hdmi mode
  1874. [ 168.097726@0] config: hdmitx: unknown cmd: 0x14000000
  1875. [ 168.102814@0] hdmtix: set audio
  1876. [ 168.105775@0] hdmitx tx_aud_src = 0
  1877. [ 168.109193@0] hdmitx: fs = 3, cd = 5, tmds_clk = 0
  1878. [ 168.114263@0] hdmitx aud_n_para = 6144
  1879. [ 168.117688@0] hdmitx set channel status
  1880. [ 168.121616@0] hdmitx: audio: Audio Type: PCM
  1881. [ 168.128189@2] avmute set to 2
  1882. [ 168.128716@2] set hdcp_pwr 1
  1883. [ 168.172373@2] restore hdcp_pwr 0
  1884. [ 168.172476@2] amhdmitx amhdmitx0: hdmitx20: stop14
  1885. [ 168.174775@2] amhdmitx amhdmitx0: hdmitx20: stop22
  1886. [ 168.185330@2] sname = 1080p60hz
  1887. [ 168.185362@2] char_clk = 148500
  1888. [ 168.185953@2] cd = 5
  1889. [ 168.188138@2] cs = 2
  1890. [ 168.190267@2] RX tmds clk: 225 Calc clk: 185
  1891. [ 168.195263@2] vout: vmode set to 1080p60hz
  1892. [ 168.199584@2] fb: current vmode=576cvbs, cmd: 0x10000
  1893. [ 168.203763@2] hdmitx_set_current_vmode[2456]
  1894. [ 168.207968@2] hdmitx: video: get current mode: 1080p60hz
  1895. [ 168.213218@2] hdmitx: update rx hdr info 0
  1896. [ 168.217286@2] hdmitx: update physcial size: 700 390
  1897. [ 168.222196@2] config: hdmitx: unknown cmd: 0x14000000
  1898. [ 168.227352@2] hdmitx: system: already init VIC = 0 Now VIC = 16
  1899. [ 168.233217@2] hdmitx div40: 0
  1900. [ 168.263311@3] hdmitx: system: set pll
  1901. [ 168.263346@3] hdmitx: system: param->VIC:16
  1902. [ 168.265495@3] hdmitx: set clk: VIC = 16 cd = 5 frac_rate = 1
  1903. [ 168.271307@3] config HPLL = 3712500
  1904. [ 168.274782@3] HPLL: 0x4000029a
  1905. [ 168.277756@3] config HPLL done
  1906. [ 168.280782@3] set_hpll_od3_clk_div[456] div = 8
  1907. [ 168.285257@3] j = 4 vid_clk_div = 1
  1908. [ 168.288794@3] hdmitx: set enc for VIC: 16
  1909. [ 168.419340@0] hdmitx: system: irq 80000001
  1910. [ 168.419398@0] Start = 0x10000100 End = 0x100001ff
  1911. [ 168.422736@0] [0x10000104]: 0x00000001
  1912. [ 168.423330@3] Sink is HDMI device
  1913. [ 168.423366@3] 1080p60hz 2997 50
  1914. [ 168.423371@3] 1080p60hz 2997 50
  1915. [ 168.423375@3] hdmtix: set audio
  1916. [ 168.423382@3] hdmitx tx_aud_src = 0
  1917. [ 168.423403@3] hdmitx: fs = 3, cd = 5, tmds_clk = 148352
  1918. [ 168.423407@3] hdmitx aud_n_para = 5824
  1919. [ 168.423421@3] hdmitx set channel status
  1920. [ 168.423468@3] hdmitx: audio: Audio Type: PCM
  1921. [ 168.423484@3]
  1922. [ 168.423484@3] vdac_enable: on:0,module_sel:8
  1923. [ 168.423494@3] vout: new mode 1080p60hz set ok
  1924. [ 168.423498@3] fb: current vmode=1080p60hz, cmd: 0x20000
  1925. [ 168.423501@3] fb: logo changed, return!
  1926. [ 168.478578@0] [0x10000180]: 0x000000ff
  1927. [ 168.478581@0] [0x10000181]: 0x000000ff
  1928. [ 168.478585@0] [0x10000182]: 0x00000003
  1929. [ 168.478587@0] [0x10000183]: 0x00000007
  1930. [ 168.478590@0] [0x10000184]: 0x0000003f
  1931. [ 168.478593@0] [0x10000185]: 0x00000002
  1932. [ 168.478596@0] [0x10000187]: 0x000000ff
  1933. [ 168.478599@0] [0x10000188]: 0x00000003
  1934. [ 168.521026@2] vout: osd0=> x:0,y:0,w:1920,h:1080
  1935. [ 168.521026@2] osd1=> x:0,y:0,w:18,h:18
  1936. [ 168.523766@2] fb: current vmode=1080p60hz, cmd: 0x40000
  1937. [ 168.537370@2] fb: osd[1] set scale, h_scale: DISABLE, v_scale: DISABLE
  1938. [ 168.538254@2] fb: osd[1].scaledata: 1920 1920 1080 1080
  1939. [ 168.543459@2] fb: osd[1].pandata: 0 0 0 0
  1940. [ 168.553991@2] vout: vout_io_open
  1941. [ 168.554028@2] vout: vout_ioctl: cmd_dir = 0x2, cmd_nr = 0x0
  1942. [ 168.557161@2] vout: vout_io_release
  1943. [ 168.659664@3] avmute set to 1
  1944. [ 168.662453@2] set hdcp_pwr 1
  1945. [ 168.703499@3] restore hdcp_pwr 0
  1946. [ 168.703602@3] amhdmitx amhdmitx0: hdmitx20: stop14
  1947. [ 168.705907@3] amhdmitx amhdmitx0: hdmitx20: stop22
  1948. [ 168.712850@3] hdcp: set mode as 1
  1949. [ 168.723305@3] hdcp14: instat: 0x1
  1950. [ 168.834397@0] hdmitx: system: irq 80000001
  1951. [ 168.834494@0] Start = 0x10000100 End = 0x100001ff
  1952. [ 168.837828@0] [0x10000104]: 0x00000001
  1953. [ 168.841834@0] [0x10000180]: 0x000000ff
  1954. [ 168.843341@3] hdcp14: instat: 0x81
  1955. [ 168.843389@3] BSTATUS0 = 0xfb BSTATUS1 = 0x8a
  1956. [ 168.853031@0] [0x10000181]: 0x000000ff
  1957. [ 168.855326@3] hdcp14: instat: 0x1
  1958. [ 168.860049@0] [0x10000182]: 0x00000003
  1959. [ 168.863677@0] [0x10000183]: 0x00000007
  1960. [ 168.867395@0] [0x10000184]: 0x0000003f
  1961. [ 168.871145@0] [0x10000185]: 0x00000002
  1962. [ 168.874821@0] [0x10000187]: 0x000000ff
  1963. [ 168.878684@0] [0x10000188]: 0x00000003
  1964. [ 169.015621@3] avmute set to 1
  1965. [ 177.135404@0] success set parent gpu_p0_composite rate to 285714285
  1966. [ 183.480162@0] WARN::ep0_do_stall:1284: req 80.06 protocol STALL; err -22
  1967. [ 183.480162@0]
  1968. [ 190.682383@1] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
  1969. [ 197.576321@2] success set parent gpu_p1_composite rate to 125000000
  1970. [ 227.215484@3] success set parent gpu_p0_composite rate to 666666666
  1971. [ 227.623533@3] success set parent gpu_p1_composite rate to 500000000
  1972. [ 237.419852@1] success set parent gpu_p0_composite rate to 400000000
  1973. [ 247.431440@2] success set parent gpu_p1_composite rate to 285714285
  1974. [ 267.656103@3] success set parent gpu_p0_composite rate to 125000000
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!