Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Booting Cisco ASA 9.1.5 in 0 seconds...
- Booting 'Cisco ASA 9.1.5 '
- kernel /boot/asa915-16-vmlinuz root=/dev/hda1 ro ide_generic.probe_mask=0x01 id
- e_core.chs=0.0:980,16,32 ide1=noprobe auto nousb console=tty0 console=ttyS0,960
- 0 bigphysarea=65535 root_dev=0x6802
- [Linux-bzImage, setup=0x2a00, size=0x149210]
- initrd /boot/asa915-16-initrd.gz
- [Linux-initrd @ 0x367a3000, 0x184c51a bytes]
- Initializing cgroup subsys cpu
- Linux version 2.6.29.6 (builders@releng02) (gcc version 4.3.4 (crosstool-NG-1.5.0) ) #1 PREEMPT Mon Oct 6 18:24:26 PDT 2014
- KERNEL supported cpus:
- Intel GenuineIntel
- AMD AuthenticAMD
- NSC Geode by NSC
- Cyrix CyrixInstead
- Centaur CentaurHauls
- Transmeta GenuineTMx86
- Transmeta TransmetaCPU
- UMC UMC UMC UMC
- BIOS-provided physical RAM map:
- BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
- BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
- BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
- BIOS-e820: 0000000000100000 - 000000007ffe0000 (usable)
- BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
- BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
- last_pfn = 0x7ffe0 max_arch_pfn = 0x100000
- RAMDISK: 367a3000 - 37fef51a
- Allocated new RAMDISK: 003a1000 - 01bed51a
- Move RAMDISK from 00000000367a3000 - 0000000037fef519 to 003a1000 - 01bed519
- 1623MB HIGHMEM available.
- 423MB LOWMEM available.
- mapped low ram: 0 - 1a7fe000
- low ram: 00000000 - 1a7fe000
- bootmap 00001000 - 00004500
- (7 early reservations) ==> bootmem [0000000000 - 001a7fe000]
- #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- #1 [0000100000 - 000039ed10] TEXT DATA BSS ==> [0000100000 - 000039ed10]
- #2 [000039f000 - 00003a1000] INIT_PG_TABLE ==> [000039f000 - 00003a1000]
- #3 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
- #4 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
- #5 [00003a1000 - 0001bed51a] NEW RAMDISK ==> [00003a1000 - 0001bed51a]
- #6 [0000001000 - 0000005000] BOOTMAP ==> [0000001000 - 0000005000]
- Zone PFN ranges:
- DMA 0x00000000 -> 0x00001000
- Normal 0x00001000 -> 0x0001a7fe
- HighMem 0x0001a7fe -> 0x0007ffe0
- Movable zone start PFN for each node
- early_node_map[2] active PFN ranges
- 0: 0x00000000 -> 0x0000009f
- 0: 0x00000100 -> 0x0007ffe0
- Allocating PCI resources starting at 88000000 (gap: 80000000:7ffc0000)
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520063
- Kernel command line: root=/dev/hda1 ro ide_generic.probe_mask=0x01 ide_core.chs=0.0:980,16,32 ide1=noprobe auto nousb console=tty0 console=ttyS0,9600 bigphysarea=65535 root_dev=0x6802
- Enabling fast FPU save and restore... done.
- Enabling unmasked SIMD FPU exception support... done.
- Initializing CPU#0
- PID hash table entries: 2048 (order: 11, 8192 bytes)
- Fast TSC calibration using PIT
- Detected 999.979 MHz processor.
- Console: colour dummy device 80x25
- console [tty0] enabled
- console [ttyS0] enabled
- Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- allocated 10485120 bytes of page_cgroup
- please try cgroup_disable=memory option if you don't want
- Memory: 1778940k/2097024k available (1715k kernel code, 316772k reserved, 623k data, 156k init, 1662856k highmem)
- virtual kernel memory layout:
- fixmap : 0xfffed000 - 0xfffff000 ( 72 kB)
- pkmap : 0xff800000 - 0xffc00000 (4096 kB)
- vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
- lowmem : 0xdd000000 - 0xf77fe000 ( 423 MB)
- .init : 0xdd34c000 - 0xdd373000 ( 156 kB)
- .data : 0xdd2acce6 - 0xdd348938 ( 623 kB)
- .text : 0xdd100000 - 0xdd2acce6 (1715 kB)
- Checking if this processor honours the WP bit even in supervisor mode...Ok.
- Calibrating delay loop (skipped), value calculated using timer frequency.. 1999.95 BogoMIPS (lpj=999979)
- Security Framework initialized
- Mount-cache hash table entries: 512
- Initializing cgroup subsys cpuacct
- Initializing cgroup subsys memory
- CPU: L1 I cache: 32K, L1 D cache: 32K
- CPU: L2 cache: 4096K
- CPU: L3 cache: 16384K
- CPU: Intel QEMU Virtual CPU version 2.5+ stepping 03
- Checking 'hlt' instruction... OK.
- Freeing SMP alternatives: 0k freed
- net_namespace: 668 bytes
- NET: Registered protocol family 16
- PCI: PCI BIOS revision 2.10 entry at 0xfd20e, last bus=0
- PCI: Using configuration type 1 for base access
- bio: create slab <bio-0> at 0
- PCI: Probing PCI hardware
- pci 0000:00:01.3: quirk: region 0600-063f claimed by PIIX4 ACPI
- pci 0000:00:01.3: quirk: region 0700-070f claimed by PIIX4 SMB
- pci 0000:00:01.0: PIIX/ICH IRQ router [8086:7000]
- NET: Registered protocol family 2
- IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
- TCP established hash table entries: 65536 (order: 7, 524288 bytes)
- TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
- TCP: Hash tables configured (established 65536 bind 65536)
- TCP reno registered
- NET: Registered protocol family 1
- Unpacking initramfs... done
- Freeing initrd memory: 24881k freed
- platform rtc_cmos: registered platform RTC device (no PNP device found)
- highmem bounce pool size: 64 pages
- HugeTLB registered 4 MB page size, pre-allocated 0 pages
- bigphysarea: Allocated 65535 pages at 0xdfc00000.
- msgmni has been set to 277
- io scheduler noop registered
- io scheduler anticipatory registered (default)
- io scheduler deadline registered
- io scheduler cfq registered
- pci 0000:00:00.0: Limiting direct PCI/PCI transfers
- pci 0000:00:01.0: PIIX3: Enabling Passive Release
- pci 0000:00:01.0: Activating ISA DMA hang workarounds
- Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- loop: module loaded
- pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
- tun: Universal TUN/TAP device driver, 1.6
- tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- Uniform Multi-Platform E-IDE driver
- ide_generic: enforcing probing of I/O ports upon user request
- ide: forcing hda as a disk (980/16/32)
- Clocksource tsc unstable (delta = 94997884 ns)
- hda: QEMU HARDDISK, ATA DISK drive
- ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
- ide-gd driver 1.18
- hda: max request size: 512KiB
- hda: 524288 sectors (268 MB) w/256KiB Cache, CHS=980/16/32
- hda: cache flushes supported
- hda: hda1
- TCP cubic registered
- NET: Registered protocol family 17
- RPC: Registered udp transport module.
- RPC: Registered tcp transport module.
- 802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>
- All bugs added by David S. Miller <davem@redhat.com>
- TIPC: Activated (version 1.6.4 compiled Oct 6 2014 18:24:03)
- NET: Registered protocol family 30
- TIPC: Started in single node mode
- Using IPI Shortcut mode
- Freeing unused kernel memory: 156k freed
- Write protecting the kernel text: 1716k
- Write protecting the kernel read-only data: 504k
- Starting kernel event manager...
- Loading hardware drivers...
- Initializing random number generator... done.
- Starting network...
- dosfsck 2.11, 12 Mar 2005, FAT32, LFN
- Starting check/repair pass.
- Starting verification pass.
- /dev/hda1: 130 files, 33069/65443 clusters
- dosfsck(/dev/hda1) returned 0
- FAT: "posix" option is obsolete, not supported now
- TIPC: Started in network mode
- TIPC: Own node address <1.1.1>, network identity 1234
- TIPC: Enabled bearer <eth:tap0>, discovery domain <1.1.0>, priority 10
- msrif: module license 'Cisco Systems, Inc' taints kernel.
- msrif module loaded.
- Starting Likewise Service Manager
- Processor memory 1652555776, Reserved memory: 110100480
- Ignoring PCI device in slot:0 (ven:0x8086 dev:0x1237 rev:0x02)
- Ignoring PCI device in slot:0 (ven:0x8086 dev:0x7000 rev:0x00)
- Ignoring PCI device in slot:0 (ven:0x8086 dev:0x7010 rev:0x00)
- Ignoring PCI device in slot:0 (ven:0x8086 dev:0x7113 rev:0x03)
- Ignoring PCI device in slot:0 (ven:0x1af4 dev:0x1000 rev:0x00)
- Ignoring PCI device in slot:0 (ven:0x1af4 dev:0x1000 rev:0x00)
- Ignoring PCI device in slot:0 (ven:0x1af4 dev:0x1000 rev:0x00)
- Ignoring PCI device in slot:0 (ven:0x1af4 dev:0x1000 rev:0x00)
- Total NICs found: 0
- L4TM: Unknown ASA Model
- secstore_buf_fill: Error reading secure store - buffer 0x79856780, size 0x14
- key_nv_init: read returned error 1, len 129
- Verify the activation-key, it might take a while...
- Running Permanent Activation Key: 0x9830fa76 0x000ebbe0 0x71803838 0xfe349484 0x053ee380
- Running Timebased Activation Key: 0x303c55d2 0xc916c453 0x29bb1233 0xfadf8dfb 0x8d1ed78a
- The Running Activation Key feature: 30 security contexts exceed the limit on the platform, reduced to 20 security contexts.
- Licensed features for this platform:
- Maximum Physical Interfaces : Unlimited perpetual
- Maximum VLANs : 100 perpetual
- Inside Hosts : Unlimited perpetual
- Failover : Active/Active perpetual
- Encryption-DES : Enabled perpetual
- Encryption-3DES-AES : Enabled perpetual
- Security Contexts : 20 364 days
- GTP/GPRS : Enabled perpetual
- AnyConnect Premium Peers : 10000 perpetual
- AnyConnect Essentials : 10000 perpetual
- Other VPN Peers : 5000 perpetual
- Total VPN Peers : 0 perpetual
- Shared License : Enabled perpetual
- AnyConnect for Mobile : Enabled perpetual
- AnyConnect for Cisco VPN Phone : Enabled perpetual
- Advanced Endpoint Assessment : Enabled perpetual
- UC Phone Proxy Sessions : 5000 perpetual
- Total UC Proxy Sessions : 10000 perpetual
- Botnet Traffic Filter : Enabled perpetual
- Intercompany Media Engine : Disabled perpetual
- Cluster : Enabled 364 days
- This platform has an ASA 5520 VPN Plus license.
- Cisco Adaptive Security Appliance Software Version 9.1(5)16
- ****************************** Warning *******************************
- This product contains cryptographic features and is
- subject to United States and local country laws
- governing, import, export, transfer, and use.
- Delivery of Cisco cryptographic products does not
- imply third-party authority to import, export,
- distribute, or use encryption. Importers, exporters,
- distributors and users are responsible for compliance
- with U.S. and local country laws. By using this
- product you agree to comply with applicable laws and
- regulations. If you are unable to comply with U.S.
- and local laws, return the enclosed items immediately.
- A summary of U.S. laws governing Cisco cryptographic
- products may be found at:
- http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
- If you require further assistance please contact us by
- sending email to export@cisco.com.
- ******************************* Warning *******************************
- This product includes software developed by the OpenSSL Project
- for use in the OpenSSL Toolkit (http://www.openssl.org/)
- Copyright (C) 1995-1998 Eric Young (eay@cryptsoft.com)
- All rights reserved.
- Copyright (c) 1998-2011 The OpenSSL Project.
- All rights reserved.
- This product includes software developed at the University of
- California, Irvine for use in the DAV Explorer project
- (http://www.ics.uci.edu/~webdav/)
- Copyright (c) 1999-2005 Regents of the University of California.
- All rights reserved.
- Busybox, version 1.16.1, Copyright (C) 1989, 1991 Free Software Foundation, Inc.
- 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- Busybox comes with ABSOLUTELY NO WARRANTY.
- This is free software, and you are welcome to redistribute it under the General
- Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
- See User Manual (''Licensing'') for details.
- DOSFSTOOLS, version 2.11, Copyright (C) 1989, 1991 Free Software Foundation, Inc.
- 59 Temple Place, Suite 330, Boston, MA 02111-1307
- 675 Mass Ave, Cambridge, MA 02139
- DOSFSTOOLS comes with ABSOLUTELY NO WARRANTY.
- This is free software, and you are welcome to redistribute it under the General
- Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
- See User Manual (''Licensing'') for details.
- grub, version 0.94, Copyright (C) 1989, 1991 Free Software Foundation, Inc.
- 59 Temple Place, Suite 330, Boston, MA 02111-1307
- grub comes with ABSOLUTELY NO WARRANTY.
- This is free software, and you are welcome to redistribute it under the General
- Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
- See User Manual (''Licensing'') for details.
- libgcc, version 4.3, Copyright (C) 2007 Free Software Foundation, Inc.
- libgcc comes with ABSOLUTELY NO WARRANTY.
- This is free software, and you are welcome to redistribute it under the General
- Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
- See User Manual (''Licensing'') for details.
- libstdc++, version 4.3, Copyright (C) 2007 Free Software Foundation, Inc.
- libstdc++ comes with ABSOLUTELY NO WARRANTY.
- This is free software, and you are welcome to redistribute it under the General
- Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
- See User Manual (''Licensing'') for details.
- Linux kernel, version 2.6.29.6, Copyright (C) 1989, 1991 Free Software
- Foundation, Inc.
- 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- Linux kernel comes with ABSOLUTELY NO WARRANTY.
- This is free software, and you are welcome to redistribute it under the General
- Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
- See User Manual (''Licensing'') for details.
- module-init-tools, version 3.10, Copyright (C) 1989, 1991 Free Software
- Foundation, Inc.
- 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- module-init-tools comes with ABSOLUTELY NO WARRANTY.
- This is free software, and you are welcome to redistribute it under the General
- Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
- See User Manual (''Licensing'') for details.
- numactl, version 2.0.3, Copyright (C) 2008 SGI.
- Author: Andi Kleen, SUSE Labs
- Version 2.0.0 by Cliff Wickman, Chritopher Lameter and Lee Schermerhorn
- numactl comes with ABSOLUTELY NO WARRANTY.
- This is free software, and you are welcome to redistribute it under the General
- Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
- See User Manual (''Licensing'') for details.
- pciutils, version 3.1.4, Copyright (C) 1989, 1991 Free Software Foundation, Inc.
- 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- pciutils comes with ABSOLUTELY NO WARRANTY.
- This is free software, and you are welcome to redistribute it under the General
- Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
- See User Manual (''Licensing'') for details.
- readline, version 5.2, Copyright (C) 1989, 1991 Free Software Foundation, Inc.
- 59 Temple Place, Suite 330, Boston, MA 02111 USA
- readline comes with ABSOLUTELY NO WARRANTY.
- This is free software, and you are welcome to redistribute it under the General
- Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
- See User Manual (''Licensing'') for details.
- udev, version 146, Copyright (C) 1989, 1991 Free Software Foundation, Inc.
- 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- udev comes with ABSOLUTELY NO WARRANTY.
- This is free software, and you are welcome to redistribute it under the General
- Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
- See User Manual (''Licensing'') for details.
- util-linux, version 2.16.1, Copyright (C) 1989, 1991 Free Software Foundation, Inc.
- The following components, built for inclusion in Busybox.
- The following components from util-linux come with ABSOLUTELY NO WARRANTY.
- fdisk:
- Copyright (C) 1992 A. V. Le Blanc (LeBlanc@mcc.ac.uk)
- Copyright (C) 2001,2002 Vladimir Oleynik <dzo@simtreas.ru> (initial bb port)
- dmesg:
- Copyright 2006 Rob Landley <rob@landley.net>
- Copyright 2006 Bernhard Reutner-Fischer <rep.nop@aon.at>
- mkswap:
- Copyright 2006 Rob Landley <rob@landley.net>
- mount:
- Copyright (C) 1995, 1996 by Bruce Perens <bruce@pixar.com>.
- Copyright (C) 1999-2004 by Erik Andersen <andersen@codepoet.org>
- Copyright (C) 2005-2006 by Rob Landley <rob@landley.net>
- umount:
- Copyright (C) 1999-2004 by Erik Andersen <andersen@codepoet.org>
- Copyright (C) 2005 by Rob Landley <rob@landley.net>
- This is free software, and you are welcome to redistribute it under the General
- Public License v.2 (http://www.gnu.org/licenses/gpl-2.0.html)
- See User Manual (''Licensing'') for details.
- Cisco Adapative Security Appliance Software, version 9.1,
- Copyright (c) 1996-2013 by Cisco Systems, Inc.
- Certain components of Cisco ASA Software, Version 9.1 are licensed under the GNU
- Lesser Public License (LGPL) Version 2.1. The software code licensed under LGPL
- Version 2.1 is free software that comes with ABSOLUTELY NO WARRANTY. You can
- redistribute and/or modify such LGPL code under the terms of LGPL Version 2.1
- (http://www.gnu.org/licenses/lgpl-2.1.html). See User Manual for licensing
- details.
- Restricted Rights Legend
- Use, duplication, or disclosure by the Government is
- subject to restrictions as set forth in subparagraph
- (c) of the Commercial Computer Software - Restricted
- Rights clause at FAR sec. 52.227-19 and subparagraph
- (c) (1) (ii) of the Rights in Technical Data and Computer
- Software clause at DFARS sec. 252.227-7013.
- Cisco Systems, Inc.
- 170 West Tasman Drive
- San Jose, California 95134-1706
- Reading from flash...
- !
- interface Ethernet0
- ^
- ERROR: % Invalid input detected at '^' marker.
- *** Output from config line 21, "interface Ethernet0"
- shutdown
- ^
- ERROR: % Invalid input detected at '^' marker.
- *** Output from config line 22, " shutdown"
- no nameif
- ^
- ERROR: % Invalid input detected at '^' marker.
- *** Output from config line 23, " no nameif"
- no security-level
- ^
- ERROR: % Invalid input detected at '^' marker.
- *** Output from config line 24, " no security-level"
- no ip address
- ^
- ERROR: % Invalid input detected at '^' marker.
- *** Output from config line 25, " no ip address"
- interface Ethernet1
- ^
- ERROR: % Invalid input detected at '^' marker.
- *** Output from config line 27, "interface Ethernet1"
- shutdown
- ^
- ERROR: % Invalid input detected at '^' marker.
- *** Output from config line 28, " shutdown"
- no nameif
- ^
- ERROR: % Invalid input detected at '^' marker.
- *** Output from config line 29, " no nameif"
- no security-level
- ^
- ERROR: % Invalid input detected at '^' marker.
- *** Output from config line 30, " no security-level"
- no ip address
- ^
- ERROR: % Invalid input detected at '^' marker.
- *** Output from config line 31, " no ip address"
- interface Ethernet2
- ^
- ERROR: % Invalid input detected at '^' marker.
- *** Output from config line 33, "interface Ethernet2"
- shutdown
- ^
- ERROR: % Invalid input detected at '^' marker.
- *** Output from config line 34, " shutdown"
- no nameif
- ^
- ERROR: % Invalid input detected at '^' marker.
- *** Output from config line 35, " no nameif"
- no security-level
- ^
- ERROR: % Invalid input detected at '^' marker.
- *** Output from config line 36, " no security-level"
- no ip address
- ^
- ERROR: % Invalid input detected at '^' marker.
- *** Output from config line 37, " no ip address"
- interface Ethernet3
- ^
- ERROR: % Invalid input detected at '^' marker.
- *** Output from config line 39, "interface Ethernet3"
- shutdown
- ^
- ERROR: % Invalid input detected at '^' marker.
- *** Output from config line 40, " shutdown"
- no nameif
- ^
- ERROR: % Invalid input detected at '^' marker.
- *** Output from config line 41, " no nameif"
- no security-level
- ^
- ERROR: % Invalid input detected at '^' marker.
- *** Output from config line 42, " no security-level"
- no ip address
- ^
- ERROR: % Invalid input detected at '^' marker.
- *** Output from config line 43, " no ip address"
- .Crashinfo is NOT enabled on Full Distribution Environment
- *** Output from config line 117, "crashinfo save disable"
- Cryptochecksum (unchanged): e4520bbd bf2d281a de175245 90be0e6c
- INFO: Power-On Self-Test in process.
- ...........................................................
- INFO: Power-On Self-Test complete.
- **********************************************************************
- WARNING: AnyConnect Essentials license active. Basic VPN support is
- in effect. For specific details, please refer to Cisco AnyConnect VPN
- Client Administrator Guide.
- **********************************************************************
- Type help or '?' for a list of available commands.
- ciscoasa>
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement