SHARE
TWEET

dmesg

a guest Oct 18th, 2014 297 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1.  
  2. [    0.000000] Booting Linux on physical CPU 0x0
  3. [    0.000000] Linux version 3.15.8+ (mk@debian) (gcc version 4.4.5 (Debian 4.4.5-8) ) #4 Wed Sep 24 14:30:32 CEST 2014
  4. [    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
  5. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  6. [    0.000000] Machine: BCM2708
  7. [    0.000000] cma: CMA: reserved 16 MiB at 16000000
  8. [    0.000000] Memory policy: Data cache writeback
  9. [    0.000000] On node 0 totalpages: 94208
  10. [    0.000000] free_area_init_node: node 0, pgdat c0686b88, node_mem_map d5d10000
  11. [    0.000000]   Normal zone: 736 pages used for memmap
  12. [    0.000000]   Normal zone: 0 pages reserved
  13. [    0.000000]   Normal zone: 94208 pages, LIFO batch:31
  14. [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  15. [    0.000000] pcpu-alloc: [0] 0
  16. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 93472
  17. [    0.000000] Kernel command line: selinux=0  dma.dmachans=0x7f35 bcm2708_fb.fbwidth=720 bcm2708_fb.fbheight=480 bcm2708.boardrev=0x10 bcm2708.serial=0x57f556b2 smsc95xx.macaddr=B8:27:EB:F5:56:B2 bcm2708.disk_led_gpio=47 bcm2708.disk_led_active_low=0 sdhci-bcm2708.emmc_clock_freq=250000000 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000  telnet zswap.enabled=1 zswap.compressor=lz4 sdhci-bcm2708.sync_after_dma=0 dwc_otg.lpm_enable=0 console=tty1 root=/dev/mmcblk0p2 rootflags=subvol=root/@,thread_pool=2,autodefrag,compress=lz4,commit=120 rootfstype=btrfs rootwait smsc95xx.turbo_mode=N elevator=cfq logo.nologo quiet noswap loglevel=0 mod_scsi.scan=sync partswap startevent=mountall splash nohdparm --startup-event mountall
  18. [    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  19. [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  20. [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  21. [    0.000000] Memory: 350064K/376832K available (4952K kernel code, 232K rwdata, 1352K rodata, 131K init, 251K bss, 26768K reserved)
  22. [    0.000000] Virtual kernel memory layout:
  23. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  24. [    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
  25. [    0.000000]     vmalloc : 0xd7800000 - 0xff000000   ( 632 MB)
  26. [    0.000000]     lowmem  : 0xc0000000 - 0xd7000000   ( 368 MB)
  27. [    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
  28. [    0.000000]       .text : 0xc0008000 - 0xc0630384   (6305 kB)
  29. [    0.000000]       .init : 0xc0631000 - 0xc0651efc   ( 132 kB)
  30. [    0.000000]       .data : 0xc0652000 - 0xc068c2a8   ( 233 kB)
  31. [    0.000000]        .bss : 0xc068c2a8 - 0xc06cb250   ( 252 kB)
  32. [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  33. [    0.000000] NR_IRQS:394
  34. [    0.000018] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483648000ns
  35. [    0.000048] Switching to timer-based delay loop
  36. [    0.000273] Console: colour dummy device 80x30
  37. [    0.000427] console [tty1] enabled
  38. [    0.000445] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.00 BogoMIPS (lpj=1000)
  39. [    0.000461] pid_max: default: 32768 minimum: 301
  40. [    0.000583] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  41. [    0.000601] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  42. [    0.001306] Initializing cgroup subsys memory
  43. [    0.001376] CPU: Testing write buffer coherency: ok
  44. [    0.001732] Setting up static identity map for 0x4bd170 - 0x4bd1a8
  45. [    0.004197] devtmpfs: initialized
  46. [    0.019036] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
  47. [    0.019364] xor: measuring software checksum speed
  48. [    0.029471]    arm4regs  :  1168.000 MB/sec
  49. [    0.039525]    8regs     :   592.000 MB/sec
  50. [    0.049569]    32regs    :   740.000 MB/sec
  51. [    0.049582] xor: using function: arm4regs (1168.000 MB/sec)
  52. [    0.051544] NET: Registered protocol family 16
  53. [    0.056905] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  54. [    0.057441] cpuidle: using governor menu
  55. [    0.058134] bcm2708.uart_clock = 3000000
  56. [    0.059886] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
  57. [    0.059903] hw-breakpoint: maximum watchpoint size is 4 bytes.
  58. [    0.059915] mailbox: Broadcom VideoCore Mailbox driver
  59. [    0.059987] bcm2708_vcio: mailbox at f200b880
  60. [    0.060064] bcm_power: Broadcom power driver
  61. [    0.060078] bcm_power_open() -> 0
  62. [    0.060085] bcm_power_request(0, 8)
  63. [    0.560741] bcm_mailbox_read -> 00000080, 0
  64. [    0.560755] bcm_power_request -> 0
  65. [    0.560854] Serial: AMBA PL011 UART driver
  66. [    0.560972] dev:f1: ttyAMA0 at MMIO 0x20201000 (irq = 83, base_baud = 0) is a PL011 rev3
  67. [    0.604555] raid6: int32x1     58 MB/s
  68. [    0.621596] raid6: int32x2     89 MB/s
  69. [    0.638927] raid6: int32x4     85 MB/s
  70. [    0.655685] raid6: int32x8     74 MB/s
  71. [    0.655699] raid6: using algorithm int32x2 (89 MB/s)
  72. [    0.655707] raid6: using intx1 recovery algorithm
  73. [    0.656339] SCSI subsystem initialized
  74. [    0.656599] usbcore: registered new interface driver usbfs
  75. [    0.656694] usbcore: registered new interface driver hub
  76. [    0.656906] usbcore: registered new device driver usb
  77. [    0.658695] Switched to clocksource stc
  78. [    0.669528] NET: Registered protocol family 2
  79. [    0.670470] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  80. [    0.670567] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
  81. [    0.670630] TCP: Hash tables configured (established 4096 bind 4096)
  82. [    0.670755] TCP: reno registered
  83. [    0.670778] UDP hash table entries: 256 (order: 0, 4096 bytes)
  84. [    0.670803] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  85. [    0.671032] NET: Registered protocol family 1
  86. [    0.671427] RPC: Registered named UNIX socket transport module.
  87. [    0.671448] RPC: Registered udp transport module.
  88. [    0.671456] RPC: Registered tcp transport module.
  89. [    0.671464] RPC: Registered tcp NFSv4.1 backchannel transport module.
  90. [    0.672646] bcm2708_dma: DMA manager at f2007000
  91. [    0.672811] bcm2708_gpio: bcm2708_gpio_probe c065bba0
  92. [    0.673155] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
  93. [    0.674119] futex hash table entries: 256 (order: -1, 3072 bytes)
  94. [    0.682040] zbud: loaded
  95. [    0.682616] VFS: Disk quotas dquot_6.5.2
  96. [    0.682969] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  97. [    0.685500] NFS: Registering the id_resolver key type
  98. [    0.685600] Key type id_resolver registered
  99. [    0.685613] Key type id_legacy registered
  100. [    0.685636] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  101. [    0.686473] msgmni has been set to 715
  102. [    0.688213] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  103. [    0.688234] io scheduler noop registered
  104. [    0.688242] io scheduler deadline registered
  105. [    0.688489] io scheduler cfq registered (default)
  106. [    0.689628] BCM2708FB: allocated DMA memory 56400000
  107. [    0.689682] BCM2708FB: allocated DMA channel 0 @ f2007000
  108. [    0.717921] Console: switching to colour frame buffer device 90x30
  109. [    0.720855] uart-pl011 dev:f1: no DMA platform data
  110. [    0.722255] usbcore: registered new interface driver smsc95xx
  111. [    0.722308] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  112. [    0.922429] Core Release: 2.80a
  113. [    0.922450] Setting default values for core params
  114. [    0.922489] Finished setting default values for core params
  115. [    1.122694] Using Buffer DMA mode
  116. [    1.122713] Periodic Transfer Interrupt Enhancement - disabled
  117. [    1.122721] Multiprocessor Interrupt Enhancement - disabled
  118. [    1.122731] OTG VER PARAM: 0, OTG VER FLAG: 0
  119. [    1.122745] Dedicated Tx FIFOs mode
  120. [    1.123110] WARN::dwc_otg_hcd_init:1042: FIQ DMA bounce buffers: virt = 0xd6414000 dma = 0x56414000 len=9024
  121. [    1.123144] FIQ FSM acceleration enabled for :
  122. [    1.123144] Non-periodic Split Transactions
  123. [    1.123144] Periodic Split Transactions
  124. [    1.123144] High-Speed Isochronous Endpoints
  125. [    1.123167] dwc_otg: Microframe scheduler enabled
  126. [    1.123215] WARN::hcd_init:473: FIQ at 0xc0391644
  127. [    1.123231] WARN::hcd_init:474: FIQ ASM at 0xc03919c0 length 36
  128. [    1.123255] WARN::hcd_init:500: MPHI regs_base at 0xd7810000
  129. [    1.123279] dwc_otg bcm2708_usb: DWC OTG Controller
  130. [    1.123326] dwc_otg bcm2708_usb: new USB bus registered, assigned bus number 1
  131. [    1.123373] dwc_otg bcm2708_usb: irq 32, io mem 0x00000000
  132. [    1.123406] Init: Port Power? op_state=1
  133. [    1.123414] Init: Power Port (0)
  134. [    1.123626] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  135. [    1.123645] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  136. [    1.123657] usb usb1: Product: DWC OTG Controller
  137. [    1.123668] usb usb1: Manufacturer: Linux 3.15.8+ dwc_otg_hcd
  138. [    1.123680] usb usb1: SerialNumber: bcm2708_usb
  139. [    1.124408] hub 1-0:1.0: USB hub found
  140. [    1.124472] hub 1-0:1.0: 1 port detected
  141. [    1.124904] dwc_otg: FIQ enabled
  142. [    1.124918] dwc_otg: NAK holdoff enabled
  143. [    1.124926] dwc_otg: FIQ split-transaction FSM enabled
  144. [    1.124945] Module dwc_common_port init
  145. [    1.125313] usbcore: registered new interface driver usb-storage
  146. [    1.125584] mousedev: PS/2 mouse device common for all mice
  147. [    1.126342] bcm2835-cpufreq: min=700000 max=840000 cur=840000
  148. [    1.126502] bcm2835-cpufreq: switching to governor performance
  149. [    1.126518] bcm2835-cpufreq: switching to governor performance
  150. [    1.126597] sdhci: Secure Digital Host Controller Interface driver
  151. [    1.126609] sdhci: Copyright(c) Pierre Ossman
  152. [    1.126676] sdhci: Enable low-latency mode
  153. [    1.126863] mmc0: no vqmmc regulator found
  154. [    1.126878] mmc0: no vmmc regulator found
  155. [    1.155735] mmc0: SDHCI controller on BCM2708_Arasan [platform] using platform's DMA
  156. [    1.155928] mmc0: BCM2708 SDHC host at 0x20300000 DMA 2 IRQ 77
  157. [    1.156025] ledtrig-cpu: registered to indicate activity on CPUs
  158. [    1.156142] hidraw: raw HID events driver (C) Jiri Kosina
  159. [    1.156385] usbcore: registered new interface driver usbhid
  160. [    1.156398] usbhid: USB HID core driver
  161. [    1.156610] NET: Registered protocol family 17
  162. [    1.156830] Key type dns_resolver registered
  163. [    1.158112] zswap: loading zswap
  164. [    1.158200] zswap: using lz4 compressor
  165. [    1.166741] Btrfs loaded
  166. [    1.167680] Waiting for root device /dev/mmcblk0p2...
  167. [    1.212608] mmc0: new high speed SDHC card at address 1234
  168. [    1.213117] mmcblk0: mmc0:1234 SA08G 7.42 GiB
  169. [    1.215611]  mmcblk0: p1 p2 p3
  170. [    1.270540] BTRFS: device label xbian devid 1 transid 217 /dev/root
  171. [    1.272935] BTRFS info (device mmcblk0p2): enabling auto defrag
  172. [    1.272980] BTRFS info (device mmcblk0p2): disk space caching is enabled
  173. [    1.272991] BTRFS: has skinny extents
  174. [    1.309094] BTRFS: detected SSD devices, enabling SSD mode
  175. [    1.323908] Indeed it is in host mode hprt0 = 00021501
  176. [    1.387046] VFS: Mounted root (btrfs filesystem) on device 0:13.
  177. [    1.389675] devtmpfs: mounted
  178. [    1.390200] Freeing unused kernel memory: 128K (c0631000 - c0651000)
  179. [    1.485839] usb 1-1: new high-speed USB device number 2 using dwc_otg
  180. [    1.486028] Indeed it is in host mode hprt0 = 00001101
  181. [    1.663237] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
  182. [    1.663264] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  183. [    1.664122] hub 1-1:1.0: USB hub found
  184. [    1.664259] hub 1-1:1.0: 5 ports detected
  185. [    1.754621] random: nonblocking pool is initialized
  186. [    1.937938] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  187. [    2.022831] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  188. [    2.022863] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  189. [    2.025893] smsc95xx v1.0.4
  190. [    2.071902] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:f5:56:b2
  191. [    2.145918] usb 1-1.3: new high-speed USB device number 4 using dwc_otg
  192. [    2.231688] usb 1-1.3: New USB device found, idVendor=0bda, idProduct=8179
  193. [    2.231768] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  194. [    2.231788] usb 1-1.3: Product: 802.11n NIC
  195. [    2.231801] usb 1-1.3: Manufacturer: Realtek
  196. [    2.231815] usb 1-1.3: SerialNumber: 00E04C0001
  197. [    9.101559] BTRFS info (device mmcblk0p2): disk space caching is enabled
  198. [   12.379660] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  199. [   13.356972] vchiq: vchiq_init_state: slot_zero = 0xd6000000, is_master = 0
  200. [   13.368102] bcm2835-cpufreq: switching to governor powersave
  201. [   13.368141] bcm2835-cpufreq: switching to governor powersave
  202. [   13.376032] bcm2835-cpufreq: switching to governor performance
  203. [   13.376067] bcm2835-cpufreq: switching to governor performance
  204. [   13.990919] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
  205. [   15.016854] udevd[560]: starting version 175
  206. [   19.527585] r8188eu: module is from the staging directory, the quality is unknown, you have been warned.
  207. [   19.957866] Chip Version Info: CHIP_8188E_Normal_Chip_TSMC_D_CUT_1T1R_RomVer(0)
  208. [   20.318037] usbcore: registered new interface driver r8188eu
  209. [   20.620130] 8188eu: disagrees about version of symbol module_layout
  210. [   23.944420] r8188eu 1-1.3:1.0: Direct firmware load failed with error -2
  211. [   23.944448] r8188eu 1-1.3:1.0: Falling back to user helper
  212. [   62.046666] init: wait-for-state (xbmcxbmc-loaded) main process (1085) killed by TERM signal
  213. [   62.931444] init: xbian-failaccess main process (194) killed by TERM signal
  214. [   69.365424] init: failsafe main process (60) killed by TERM signal
  215. [   69.424769] init: xbmc-failed-start main process (390) killed by TERM signal
  216. [   69.542100] init: wait-for-state (zram-swapxbmc-done) main process (1003) killed by TERM signal
  217. [   72.028092] Adding 250876k swap on /dev/mmcblk0p3.  Priority:0 extents:1 across:250876k SSFS
  218. [  109.733241] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!
 
Top