Guest User

Untitled

a guest
Aug 31st, 2014
273
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. smartctl -x /dev/sda
  2. smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-4-amd64] (local build)
  3. Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Device Model: WDC WD1003FBYZ-010FB0
  7. Serial Number: WD-WCAW37370083
  8. LU WWN Device Id: 5 0014ee 209def52d
  9. Firmware Version: 01.01V03
  10. User Capacity: 1,000,204,886,016 bytes [1.00 TB]
  11. Sector Size: 512 bytes logical/physical
  12. Device is: Not in smartctl database [for details use: -P showall]
  13. ATA Version is: 8
  14. ATA Standard is: Exact ATA specification draft version not indicated
  15. Local Time is: Sun Aug 31 14:59:11 2014 EDT
  16. SMART support is: Available - device has SMART capability.
  17. SMART support is: Enabled
  18.  
  19. === START OF READ SMART DATA SECTION ===
  20. SMART overall-health self-assessment test result: PASSED
  21.  
  22. General SMART Values:
  23. Offline data collection status: (0x80) Offline data collection activity
  24. was never started.
  25. Auto Offline Data Collection: Enabled.
  26. Self-test execution status: ( 0) The previous self-test routine completed
  27. without error or no self-test has ever
  28. been run.
  29. Total time to complete Offline
  30. data collection: (16860) seconds.
  31. Offline data collection
  32. capabilities: (0x7b) SMART execute Offline immediate.
  33. Auto Offline data collection on/off support.
  34. Suspend Offline collection upon new
  35. command.
  36. Offline surface scan supported.
  37. Self-test supported.
  38. Conveyance Self-test supported.
  39. Selective Self-test supported.
  40. SMART capabilities: (0x0003) Saves SMART data before entering
  41. power-saving mode.
  42. Supports SMART auto save timer.
  43. Error logging capability: (0x01) Error logging supported.
  44. General Purpose Logging supported.
  45. Short self-test routine
  46. recommended polling time: ( 2) minutes.
  47. Extended self-test routine
  48. recommended polling time: ( 166) minutes.
  49. Conveyance self-test routine
  50. recommended polling time: ( 5) minutes.
  51. SCT capabilities: (0x303f) SCT Status supported.
  52. SCT Error Recovery Control supported.
  53. SCT Feature Control supported.
  54. SCT Data Table supported.
  55.  
  56. SMART Attributes Data Structure revision number: 16
  57. Vendor Specific SMART Attributes with Thresholds:
  58. ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
  59. 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0
  60. 3 Spin_Up_Time POS--K 100 253 021 - 0
  61. 4 Start_Stop_Count -O--CK 100 100 000 - 2
  62. 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0
  63. 7 Seek_Error_Rate -OSR-K 100 253 000 - 0
  64. 9 Power_On_Hours -O--CK 098 098 000 - 2137
  65. 10 Spin_Retry_Count -O--CK 100 253 000 - 0
  66. 11 Calibration_Retry_Count -O--CK 100 253 000 - 0
  67. 12 Power_Cycle_Count -O--CK 100 100 000 - 2
  68. 192 Power-Off_Retract_Count -O--CK 200 200 000 - 1
  69. 193 Load_Cycle_Count -O--CK 200 200 000 - 9
  70. 194 Temperature_Celsius -O---K 114 109 000 - 33
  71. 196 Reallocated_Event_Count -O--CK 200 200 000 - 0
  72. 197 Current_Pending_Sector -O--CK 200 200 000 - 0
  73. 198 Offline_Uncorrectable ----CK 100 253 000 - 0
  74. 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0
  75. 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0
  76. ||||||_ K auto-keep
  77. |||||__ C event count
  78. ||||___ R error rate
  79. |||____ S speed/performance
  80. ||_____ O updated online
  81. |______ P prefailure warning
  82.  
  83. General Purpose Log Directory Version 1
  84. SMART Log Directory Version 1 [multi-sector log support]
  85. GP/S Log at address 0x00 has 1 sectors [Log Directory]
  86. SMART Log at address 0x01 has 1 sectors [Summary SMART error log]
  87. SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log]
  88. GP Log at address 0x03 has 6 sectors [Ext. Comprehensive SMART error log]
  89. SMART Log at address 0x06 has 1 sectors [SMART self-test log]
  90. GP Log at address 0x07 has 1 sectors [Extended self-test log]
  91. GP Log at address 0x08 has 2 sectors [Power Conditions]
  92. SMART Log at address 0x09 has 1 sectors [Selective self-test log]
  93. GP Log at address 0x10 has 1 sectors [NCQ Command Error]
  94. GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters]
  95. GP/S Log at address 0x80 has 16 sectors [Host vendor specific log]
  96. GP/S Log at address 0x81 has 16 sectors [Host vendor specific log]
  97. GP/S Log at address 0x82 has 16 sectors [Host vendor specific log]
  98. GP/S Log at address 0x83 has 16 sectors [Host vendor specific log]
  99. GP/S Log at address 0x84 has 16 sectors [Host vendor specific log]
  100. GP/S Log at address 0x85 has 16 sectors [Host vendor specific log]
  101. GP/S Log at address 0x86 has 16 sectors [Host vendor specific log]
  102. GP/S Log at address 0x87 has 16 sectors [Host vendor specific log]
  103. GP/S Log at address 0x88 has 16 sectors [Host vendor specific log]
  104. GP/S Log at address 0x89 has 16 sectors [Host vendor specific log]
  105. GP/S Log at address 0x8a has 16 sectors [Host vendor specific log]
  106. GP/S Log at address 0x8b has 16 sectors [Host vendor specific log]
  107. GP/S Log at address 0x8c has 16 sectors [Host vendor specific log]
  108. GP/S Log at address 0x8d has 16 sectors [Host vendor specific log]
  109. GP/S Log at address 0x8e has 16 sectors [Host vendor specific log]
  110. GP/S Log at address 0x8f has 16 sectors [Host vendor specific log]
  111. GP/S Log at address 0x90 has 16 sectors [Host vendor specific log]
  112. GP/S Log at address 0x91 has 16 sectors [Host vendor specific log]
  113. GP/S Log at address 0x92 has 16 sectors [Host vendor specific log]
  114. GP/S Log at address 0x93 has 16 sectors [Host vendor specific log]
  115. GP/S Log at address 0x94 has 16 sectors [Host vendor specific log]
  116. GP/S Log at address 0x95 has 16 sectors [Host vendor specific log]
  117. GP/S Log at address 0x96 has 16 sectors [Host vendor specific log]
  118. GP/S Log at address 0x97 has 16 sectors [Host vendor specific log]
  119. GP/S Log at address 0x98 has 16 sectors [Host vendor specific log]
  120. GP/S Log at address 0x99 has 16 sectors [Host vendor specific log]
  121. GP/S Log at address 0x9a has 16 sectors [Host vendor specific log]
  122. GP/S Log at address 0x9b has 16 sectors [Host vendor specific log]
  123. GP/S Log at address 0x9c has 16 sectors [Host vendor specific log]
  124. GP/S Log at address 0x9d has 16 sectors [Host vendor specific log]
  125. GP/S Log at address 0x9e has 16 sectors [Host vendor specific log]
  126. GP/S Log at address 0x9f has 16 sectors [Host vendor specific log]
  127. GP/S Log at address 0xa0 has 16 sectors [Device vendor specific log]
  128. GP/S Log at address 0xa1 has 16 sectors [Device vendor specific log]
  129. GP/S Log at address 0xa2 has 16 sectors [Device vendor specific log]
  130. GP/S Log at address 0xa3 has 16 sectors [Device vendor specific log]
  131. GP/S Log at address 0xa4 has 16 sectors [Device vendor specific log]
  132. GP/S Log at address 0xa5 has 16 sectors [Device vendor specific log]
  133. GP/S Log at address 0xa6 has 16 sectors [Device vendor specific log]
  134. GP/S Log at address 0xa7 has 16 sectors [Device vendor specific log]
  135. GP/S Log at address 0xa8 has 1 sectors [Device vendor specific log]
  136. GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log]
  137. GP/S Log at address 0xaa has 1 sectors [Device vendor specific log]
  138. GP/S Log at address 0xab has 1 sectors [Device vendor specific log]
  139. GP/S Log at address 0xac has 1 sectors [Device vendor specific log]
  140. GP/S Log at address 0xad has 1 sectors [Device vendor specific log]
  141. GP/S Log at address 0xae has 1 sectors [Device vendor specific log]
  142. GP/S Log at address 0xaf has 1 sectors [Device vendor specific log]
  143. GP/S Log at address 0xb0 has 1 sectors [Device vendor specific log]
  144. GP/S Log at address 0xb1 has 1 sectors [Device vendor specific log]
  145. GP/S Log at address 0xb2 has 1 sectors [Device vendor specific log]
  146. GP/S Log at address 0xb3 has 1 sectors [Device vendor specific log]
  147. GP/S Log at address 0xb4 has 1 sectors [Device vendor specific log]
  148. GP/S Log at address 0xb5 has 1 sectors [Device vendor specific log]
  149. GP Log at address 0xb6 has 1 sectors [Device vendor specific log]
  150. GP/S Log at address 0xb7 has 1 sectors [Device vendor specific log]
  151. GP/S Log at address 0xbd has 1 sectors [Device vendor specific log]
  152. GP/S Log at address 0xc0 has 1 sectors [Device vendor specific log]
  153. GP Log at address 0xc1 has 24 sectors [Device vendor specific log]
  154. GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status]
  155. GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer]
  156.  
  157. SMART Extended Comprehensive Error Log Version: 1 (6 sectors)
  158. No Errors Logged
  159.  
  160. SMART Extended Self-test Log Version: 1 (1 sectors)
  161. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  162. # 1 Extended offline Completed without error 00% 2108 -
  163. # 2 Short offline Completed without error 00% 2056 -
  164. # 3 Extended offline Aborted by host 90% 2056 -
  165.  
  166. SMART Selective self-test log data structure revision number 1
  167. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  168. 1 0 0 Not_testing
  169. 2 0 0 Not_testing
  170. 3 0 0 Not_testing
  171. 4 0 0 Not_testing
  172. 5 0 0 Not_testing
  173. Selective self-test flags (0x0):
  174. After scanning selected spans, do NOT read-scan remainder of disk.
  175. If Selective self-test is pending on power-up, resume after 0 minute delay.
  176.  
  177. SCT Status Version: 3
  178. SCT Version (vendor specific): 258 (0x0102)
  179. SCT Support Level: 1
  180. Device State: Active (0)
  181. Current Temperature: 33 Celsius
  182. Power Cycle Min/Max Temperature: 26/38 Celsius
  183. Lifetime Min/Max Temperature: 0/38 Celsius
  184. Under/Over Temperature Limit Count: 0/0
  185. SCT Temperature History Version: 2
  186. Temperature Sampling Period: 1 minute
  187. Temperature Logging Interval: 1 minute
  188. Min/Max recommended Temperature: 0/60 Celsius
  189. Min/Max Temperature Limit: -41/85 Celsius
  190. Temperature History Size (Index): 478 (74)
  191.  
  192. Index Estimated Time Temperature Celsius
  193. 75 2014-08-31 07:02 33 **************
  194. ... ..( 48 skipped). .. **************
  195. 124 2014-08-31 07:51 33 **************
  196. 125 2014-08-31 07:52 36 *****************
  197. ... ..(140 skipped). .. *****************
  198. 266 2014-08-31 10:13 36 *****************
  199. 267 2014-08-31 10:14 35 ****************
  200. ... ..( 2 skipped). .. ****************
  201. 270 2014-08-31 10:17 35 ****************
  202. 271 2014-08-31 10:18 34 ***************
  203. ... ..( 15 skipped). .. ***************
  204. 287 2014-08-31 10:34 34 ***************
  205. 288 2014-08-31 10:35 33 **************
  206. ... ..( 58 skipped). .. **************
  207. 347 2014-08-31 11:34 33 **************
  208. 348 2014-08-31 11:35 34 ***************
  209. ... ..( 3 skipped). .. ***************
  210. 352 2014-08-31 11:39 34 ***************
  211. 353 2014-08-31 11:40 33 **************
  212. ... ..( 25 skipped). .. **************
  213. 379 2014-08-31 12:06 33 **************
  214. 380 2014-08-31 12:07 34 ***************
  215. ... ..( 2 skipped). .. ***************
  216. 383 2014-08-31 12:10 34 ***************
  217. 384 2014-08-31 12:11 35 ****************
  218. ... ..( 36 skipped). .. ****************
  219. 421 2014-08-31 12:48 35 ****************
  220. 422 2014-08-31 12:49 34 ***************
  221. ... ..( 19 skipped). .. ***************
  222. 442 2014-08-31 13:09 34 ***************
  223. 443 2014-08-31 13:10 33 **************
  224. ... ..( 30 skipped). .. **************
  225. 474 2014-08-31 13:41 33 **************
  226. 475 2014-08-31 13:42 34 ***************
  227. ... ..( 5 skipped). .. ***************
  228. 3 2014-08-31 13:48 34 ***************
  229. 4 2014-08-31 13:49 35 ****************
  230. ... ..( 26 skipped). .. ****************
  231. 31 2014-08-31 14:16 35 ****************
  232. 32 2014-08-31 14:17 34 ***************
  233. ... ..( 16 skipped). .. ***************
  234. 49 2014-08-31 14:34 34 ***************
  235. 50 2014-08-31 14:35 33 **************
  236. ... ..( 23 skipped). .. **************
  237. 74 2014-08-31 14:59 33 **************
  238.  
  239. SCT Error Recovery Control:
  240. Read: 70 (7.0 seconds)
  241. Write: 70 (7.0 seconds)
  242.  
  243. SATA Phy Event Counters (GP Log 0x11)
  244. ID Size Value Description
  245. 0x0001 2 0 Command failed due to ICRC error
  246. 0x0002 2 0 R_ERR response for data FIS
  247. 0x0003 2 0 R_ERR response for device-to-host data FIS
  248. 0x0004 2 0 R_ERR response for host-to-device data FIS
  249. 0x0005 2 0 R_ERR response for non-data FIS
  250. 0x0006 2 0 R_ERR response for device-to-host non-data FIS
  251. 0x0007 2 0 R_ERR response for host-to-device non-data FIS
  252. 0x0008 2 0 Device-to-host non-data FIS retries
  253. 0x0009 2 66 Transition from drive PhyRdy to drive PhyNRdy
  254. 0x000a 2 46 Device-to-host register FISes sent due to a COMRESET
  255. 0x000b 2 0 CRC errors within host-to-device FIS
  256. 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
  257. 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
  258. 0x8000 4 7695184 Vendor specific
RAW Paste Data