Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- cat proc/last_kmsg
- [0] ========================================
- [0] welcome to lk
- [0] Original Log Magic = 0x484040cc
- [0] calling constructors
- [0] initializiεg heap
- [0] initializing threads
- [0] initializing dpc
- [0] initializing timers
- [0] creating bootstrap completion thread
- [0] creating bootstrap prkgress monitor thread
- [10] top of bootstrap3()
- [10] top of bootstrap2()
- [10] initializing platform
- [10] initializing target
- [400] calling apps_init()
- [400] aboot_init()
- [400] aboot_banεer()
- [420] power on reason = 0x100, msm watchdog status = 0x4
- [620] aboot_check_rtc_alarm_boot()
- [620] aboot_dev_init()
- [620] init_microusb_ic()
- [1420] init_microusb_ic success1
- [1420] init_microusb_ic success2
- [142 ] smb328a_init_charger : log(1)
- [1420] smb328a_init_charger : log(2)
- [1430] smb328a_init_charger : is_reboot_mode = 0, vcell = 4096
- [!430] check valid dcin (0x33) = 0x0
- [1430] no dcin, skip init_charger
- [1440] battery pole check!
- [1450] fuelguage : soc = 96%, vcell = 4096mV
- [1460] fuelguage : rcomp(c71f) ==?? 0xc71f
- [1470] 9744 = ( 409600 - 300886 ) * 8963 / 100000
- [2000] HW_REV = 0xd
- [2000] reboot_mode = 0xa2d86549
- [2000] debuglevel = 0x574f4c44
- [2000] do key check
- [2020] VolUp & VolDown - RECOVERYMODE_BY_KEY
- [2020] aboot_check_lpm : rb = 0, chg = 0, av = 0
- [2030] get mpp11 state (2) = 1
- [2040] enter normal booting mode
- [2050] boot_linux_from_mmc()
- [3600] kernel @ 40408000 (5284600 bytes)
- [3600] ramdisk @ 41800000 (3647580 bytes)
- [3600] cmdline = 'androidboot.hardware=qcom usb_id_pin_rework=true no_console_suspend=true zcache sec_log=0x80000@0x4018
- 4008 sec_dbg=0x100000@0x4020400c sec_debug.reset_reason=0x1a2b3c00 console=ttyHSL0,115200,n8 sec_debug.enable=0 sec_debu
- g.enable_user=0 vmalloc=432m hw_rev=13'
- [3600] Booting Linux
- [3600] boot_linux()
- [3620] booting linux @ 0x40408000, ramdisk @ 0x41800000 (3647580)
- [3620] cmdline: androi`boot.hardware=qcom usb_id_pin_rework=true no_console_suspend=true zcache sec_log=0x80000@0x401840
- 08 sec_dbg=0x100000@0x4020400c sec_debug.reset_reason=0x1a2b3c00 console=ttyHSL0,115200,n8 sec_debug.enable=0 sec_debug.
- enable_user=0 vmalloc=432m hw_rev=13
- [3620] entry()
- <6>[ 0.488952] sec_log_save_old: saved old log at 2104@de143000
- <6>[ 0.000000] [0: swapper: 0] Booting Linux on physical CPU 0
- <6>[ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpu
- <5>[ 0.000000] [0: swapper: 0] Linux version 3.0.101-cyanogenmod-g2389f31-dirty (root@ubuntu) (gcc version
- 4.7 (GCC) ) #1 SMP PREEMPT Sun Jul 6 14:25:02 CEST 2014
- <4>[ 0.000000] [0: swapper: 0] CPU: ARMv7 Processor [510f02d2] revision 2 (ARMv7), cr=10c5387d
- <4>[ 0.000000] [0: swapper: 0] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
- <4>[ 0.000000] [0: swapper: 0] Machine: QCT MSM8X60 FUSION FFA
- <6>[ 0.000000] [0: swapper: 0] memory pool 0 (start 38000000 size 600000) initialized
- <6>[ 0.000000] [0: swapper: 0] memory pool 1 (start 38600000 size 3802000) initialized
- <6>[ 0.000000] [0: swapper: 0] memory pool 3 (start 78f00000 size 7100000) initialized
- <4>[ 0.000000] [0: swapper: 0] Memory policy: ECC disabled, Data cache writealloc
- <6>[ 0.000000] [0: swapper: 0] socinfo_init: v6, id=86, ver=2.0, raw_id=1697, raw_ver=1697, hw_plat=0, hw_
- plat_ver=65536
- <6>[ 0.000000] [0: swapper: 0] accessory_chip=0 hw_plat_subtype=0
- <6>[ 0.000000] [0: swapper: 0] sec_getlog_supply_meminfo: 40000000 40000000 0 0
- <7>[ 0.000000] [0: swapper: 0] On node 0 totalpages: 211200
- <7>[ 0.000000] [0: swapper: 0] free_area_init_node: node 0, pgdat c0cf2da0, node_mem_map c177b000
- <7>[ 0.000000] [0: swapper: 0] Normal zone: 992 pages used for memmap
- <7>[ 0.000000] [0: swapper: 0] Normal zone: 0 pages reserved
- <7>[ 0.000000] [0: swapper: `0] Normal zone: 105248 pages, LIFO batch:31
- <7>[ 0.000000] [0: swapper: 0] HighMeM zone: 1048 pages used for memmap
- <7>[ 0.000000] [0: swapper: 0] HighMem zone: 103912 pages, LIFO batch:31
- <6>[ 0.000000] [0: swapper: 0] allocating 12906496 bytes at c7c00000 (48000000 physical) for fb
- <6>[ 0.000000] [0: swapper: 0] PERCPU: Embedded 8 pages/cpu @c8852000 s10144 r8192 d14432 u32768
- <7>[ 0.000000] [0: swapper: 0] pcpu-alloc: s10144 r8192 d14432 u32768 alloc=8*4096
- <7>[ 0.000000] [0: swapper: 0] pcpu-alloc: [0] 0 [0] 1
- <4>[ 0.000000] [0: swapper: 0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 209160
- <5>[ 0.000000] [0: swapper: 0] Kernel command line: androidboot.hardware=qcom usb_id_pin_rework=true no_con
- sole_suspend=true zcache sec_log=0x80000@0x40184008 sec_dbg=0x100000@0x4020400c sec_debug.reset_reason=0x1a2b3c00 consol
- e=ttyHSL0,115200,n8 sec_debug.enable=0 sec_debug.enable_user=0 vmalloc=432m hw_rev=13 androidboot.emmc=true androidboot.
- serialno=f3ae2762 androidboot.baseband=csfb
- <0>[ 0.000000] [0: swapper: 0] (sec_dbg_setup)
- <0>[ 0.000000] [0: swapper: 0] (sec_dbg_setup) sec_dbg_buf_base = 0x4020400c
- <0>[ 0.000000] [0: swapper: 0] (sec_dbg_setup) sec_dbg_buf_size = 0x100000
- <4>[ 0.000000] hw_rev_setup : HW rev value is intialized first
- <4>[ 0.000000] HW rev value : 0xD
- <6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- <6>[ 0.00000 ] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- <6>[ 0.000000] allocated 4177920 bytes of page_cgroup
- <6>[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
- <6>[ 0.000000] Memory: 43MB 760MB 22MB = 825MB total
- <5>[ 0.000000] Memory: 795796k/795796k available, 165740k reserved, 419840K highmem
- <5>[ 0.000000] Virtual kernel memory layout:
- <5>[ 0.000000] vectkr : 0xffff0000 - 0xffff1000 ( 4 kB)
- <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- <5>[ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
- <5>[ 0.000000] vmalloc : 0xdf800000 - 0xfa000000 ( 424 MB)
- <5>[ 0.000000] lowmem : 0xc0000000 - 0xdf000000 ( 496 MB)
- <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- <5>[ 0.000000] modules : 0xbf00000► - 0xbfe00000 ( 14 MB)
- <5>[ 0.000000] .init : 0xc0008000 - 0xc004d000 ( 276 kB)
- <5>[ 0.000000] .text : 0xc0100000 - 0xc0b79d84 (10728 kB)
- <5>[ 0.000000] .data : 0xc0c00000 - 0xc0cf5580 ( 982 kB)
- <5>[ 0.000000] .bss : 0xc0cf55a4 - 0xc1358428 (6540 kB)
- <6>[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- <6>[ 0.000000] Preemptible hierarchical RCU implementation.
- <6>[ 0.000000] NR_IRQS:855
- <6>[ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
- <6>[ 0.000000] Console: colour dummy device 80x30
- <6>[ 0.150207] Calibrating delay using timer specific routine.. 13.53 BogoMIPS (lpj=67656)
- <6>[ 0.150238] pid_max: default: 32768 minimum: 301
- <6>[ 0.150604] Security Framework initialized
- <6>[ 0.150634] SELinux: Initializing.
- <7>[ 0.150695] SELinux: Starting in permissive mode
- <6>[ 0.150878] Mount-cache hash table entries: 512
- <6>[ 0.152282] Initializing cgroup subsys cpuacct
- <6>[ 0.152374] Initializing cgroup subsys memory
- <6>[ 0.152465] Initializing cgroup subsys freezer
- <6>[ 0.152526] CPU: Testing write buffer coherency: ok
- <6>[ 0.152893] hw perfevents: enabled with ARMv7 Scorpion-MP PMU driver, 5 counters available
- <4>[ 0.185485] CPU1: Booted secondary processor
- <6>[ 0.195373] Brought up 2 CPUs
- <6>[ 0.195404] SMP: Total of 2 processors activated (27.06 BogoMIPS).
- <6>[ 0.210845] print_constraints: dummy:
- <3>[ 0.210937] rdev_init_debugfs: Error-Bad Function Input
- <6>[ 0.211273] NET: Registered protocol family 16
- <3>[ 0.211486] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
- <6>[ 0.213714] (sec_get_lpm_mode) 1a2b3c00
- <0>[ 0.213745] (sec_get_lpm_mode) 0
- <0>[ 0.213745] (sec_debug_init)
- <0>[ 0.213775] (sec_debug_init) reset_reason : 0x1a2b3c00
- <6>[ 0.213806] msm_rpm_init: RPM firmware 2.0.4196187
- <6>[ 0.214599] saw_probe: id=0, name=8901_s0
- <6>[ 0.215057] saw_probe: id=1, name=8901_s1
- <6>[ 0.216705] rcg_clk_handoff: gsbi12_uart_clk rate=3686400
- <6>[ 0.216735] rcg_clk_handoff: gsbi12_qup_clk rate=24000000
- <6>[ 0.216766] rcg_clk_handoff: sdc1_clk rate=48000000
- <6>[ 0.216827] rcg_clk_handoff: dsi_byte_clk rate=1
- <6>[ 0.216888] rcg_cdk_handoff: mdp_clk rate=200000000
- <6>[ 0.217010] rcg_clk_handoff: pixel_mdp_clk rate=27400000
- <6>[ 0.219055] ACPU PVS: Slow
- <6>[ 0.219085] Max ACPU freq: 1512000 KHz
- <6>[ 0.225097] CPU0: 23 scaling frequencies supported.
- <6>[ 0.225097] CPU1: 23 scaling frequencies supported.
- <3>[ 0.225677] LTE_switch_init!
- <3>[ 0.225738] LTE_switch_init end!
- <6>[ 0.227172] pm8058_probe: PMIC revision: E3
- <6>[ 0.228515] pm_gpio_probe: OK: base=173, ngpio=40
- <6>[ 0.228729] pm8xxx_mpp_probe: OK: base=213, ngpio=12
- <6>[ 0.230102] pm8901_probe: PMIC REVISION = F4
- <6>[ 0.230560] pm8xxx_mpp_probe: OK: base=225, ngpio=4
- <6>[ 0.245635] ram_console: got buffer at 77800000, size 100000
- <6>[ 0.245788] ram_console: uncorrectable error in header
- <6>[ 0.245788] ram_console: no valid data in buffer (sig = 0xc0474244)
- <6>[ 0.254119] console [ram-1] enabled
- <3>[ 0.255584] pm8058_gpios_init PMIC_GPIO_EAR_DET : OK
- <3>[ 0.256195] msm_snddev_init
- <3>[ 0.256683] msm_snddev_init snd_devices_celox - config
- <4>[ 0.267303] [TSP] Power Down S to discharge for unexpected leackage current
- <4>[ 0.267761] [TKEY] tkey_device_init: 8901_lvs2 On
- <4>[ 0.268371] [TKEY] tkey_device_init: TKEY_L12 3.3 V Set
- <4>[ 0.268432] brcm_wlan_init: start
- <4>[ 0.268554] brcm_init_wlan_mem: WIFI MEM Allocated
- <6>[ 0.288146] bio: create slab <bio-0> at 0
- <6>[ 0.289611] ION heap vmalloc created
- <6>[ 0.289764] ION heap mm created at 38800000 with size 3600000
- <6>[ 0.289855] ION heap mm_fw created at 38600000 with size 200000
- <6>[ 0.290039] ION heap mfc created at 3be00000 with size 2000
- <6>[ 0.290130] ION heap sf created at 78f00000 with size 4000000
- <6>[ 0.290313] ION heap camera_preview created at 7cf00000 with size 1200000
- <6>[ 0.290405] ION heap wb created at 7e100000 with size 1400000
- <6>[ 0.290557] ION heap qsecom created at 7f500000 with size 600000
- <6>[ 0.290649] ION heap audio created at 7fb00000 with size 4cf000
- <5>[ 0.290985] pmic8058_pwm_probe: OK
- <5>[ 0.291656] SCSI subsystem initialized
- <6>[ 0.291931] usbcore: registered new interface driver usbfs
- <6>[ 0.292114] usbcore: registered new interface driver hub
- <6>[ 0.292297] usbcore: registered new device driver usb
- <6>[ 0.292816] i2c-gpio i2c-gpio.15: using pins 107 (SDA) and 101 (SCL)
- <6>[ 0.293090] i2c-gpio i2c-gpio.10: uqing pins 138 (SDA) and 139 (SCL)
- <6>[ 0.293365] i2c-gpio i2c-gpio.13: using pins 156 (SDA) and 157 (SCL)
- <6>[ 0.293609] i2c-gpio i2c-gpio.11: using pins 38 (SDA) and 39 (SCL)
- <6>[ 0.293975] i2c-gpio i2c-gpio.12: using pins 51 (SDA) and 52 (SCL)
- <6>[ 0.294250] i2c-gpio i2c-gpio.17: using pins 70 (SDA) and 94 (SCL)
- <6>[ 0.294494] i2c-gpio i2c-gpio.9: using pins 155 (SDA) and 154 (SCL)
- <6>[ 0.294921] Advanced Linux Sound Architecture Driver Version 1.0.24.
- <6>[ 0.295501] Bluetooth: Core ver 2.16
- <6>[ 0.295684] NET: Registered protocol family 31
- <6>[ 0.295745] Bluetooth: HCI device and connection manager initialized
- <6>[ 0.295867] Bluetooth: HCI socket layer initialized
- <6>[ 0.295959] Bluetooth: L2CAP socket layer initialized
- <6>[ 0.296173] Bluetooth: SCO socket layer initialized
- <6>[ 0.296783] cfg80211: Calling CRDA to update world regulatory domain
- <6>[ 0.29705x] Switching to clocksource gp_timer
- <6>[ 0.318450] NET: Registered prodocol family 2
- <6>[ 0.318664] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
- <6>[ 0.319091] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
- <6>[ 0.319885] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
- <6>[ 0.320922] TCP: Hash tables configured (established 65536 bind 65536)
- <6>[ 0.321044] TCP reno registered
- <6>[ 0.321136] UDP hash table entries: 256 (order: 1, 12288 bytes)
- <6>[ 0.321228] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
- <6>[ 0.321777] NET: Registered protocol family 1
- <6>[ 0.322143] RPC: Registered named UNIX socket transport module.
- <6>[ 0.322265] RPC: Registered udp transport module.
- <6>[ 0.322326] RPC: Registered tcp transport module.
- <6>[ 0.322479] RPC: Registered tcp NFSv4.1 backchannel transport module.
- <6>[ 0.322753] Trying to unpack rootfs image as initramfs...
- <6>[ 0.463317] Freeing initrd memory: 3560K
- <6>[ 0.463684] PMU: registered new PMU device of type 0
- <6>[ 0.464019] PMU: registered new PMU device of type 1
- <6>[ 0.464508] ETM/ETB intialized.
- <6>[ 0.464691] pil_qdsp6v3 pil_qdsp6v3: using secure boot
- <6>[ 0.465270] pil_modem pil_modem: using secure boot
- <6>[ 0.465515] sdio_al:SDIO-AL SW version 1.30
- <3>[ 0.468597] smd_channel_probe_worker: allocat)on table not initialized
- <6>[ 0.475189] msm_dsps driver version 3.03.
- <6>[ 0.481170] lpa_if_init: lpa_if_ptr 0xde9e8f00 buf_vir 0xffdf0000 buf_phy 0x5e5e0000 buf_zise 65536
- <6>[ 0.482055] dspcrashd_probe: Platform driver values: Base = 0x46700000, Size = 0x2000000,pdata = 0xdeaddead
- <3>[ 0.483734] sec_switch_probe enter sec_switch_probe
- <6>[ 0.484588] charm_modem_probe: Registering charm modem
- <5>[ 0.486846] msm_rpm_log_probe: OK
- <3>[ 0.487060] [BT] bcm4330_bluetooth_init
- <3>[ 0.487915] [BT] bcm4330_bluetooth_probe
- <3>[ 0.488311] printk_remap_nocache: sec_log_save_size 524288 at sec_log_save_base 0x40184008
- <3>[ 0.488464] printk_remap_nocache: sec_log_reserve_size 524296 at sec_log_reserve_base 0x40184000
- <6>[ 0.488952] sec_log_save_old: saved old log At 2104@de143000
- <6>[ 0.493316] sec_getlog_supply_kloginfo: 0xc112d61c
- <6>[ 0.493530] audit: initializing netlink socket (disabled)
- <5>[ 0.493713] type=2000 audit(0.460:1): initialized
- <4>[ 0.576263] highmem bounce pool size: 64 pages
- <6>[ 0.576599] ashmem: initialized
- <6>[ 0.582550] exFAT: Version 1.2.9
- <6>[ 0.584442] fuse init (API version 7.16)
- <6>[ 0.584930] msgmni has been set to 741
- <7>[ 0.585021] SELinux: Registering netfilter hooks
- <6>[ 0.587036] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
- <6>[ 0.587188] io scheduler noop registered
- <6>[ 0.587280] io scheduler deadline registered (default)
- <6>[ 0.587463] io scheduler row registered
- <6>[ 0.587615] io scheduler cfq registered
- <4>[ 0.590209] mdp4_csc_config: Block type 10 isn't supported by CSC.
- <4>[ 0.590362] mdp4_csc_config: Block type 8 isn't suppobted by CSC.
- <4>[ 0.594573] ld9040 start lcdc_ld9040_panel_init
- <4>[ 0.594726] ld9040 start ld9040_probe: pdev->name:lcdc_ld9040_wvga
- <4>[ 0.594848] ld9040 msm_fb_add_device START
- <6>[ 0.594940] setting pdata->panel_info.fb_num to 3. type: 0
- <3>[ 0.595031] msm_fb_add_device: msm_fb_device_alloc failed!
- <4>[ 0.595184] ld9040 msm_fb_add_device end
- <4>[ 0.595642] ld9040 platform_driver_register(&this_driver) is done
- <4>[ 0.595794] ld9040 LDI : EA8868, pixelclock 27400000
- <6>[ 0.596191] setting pdata->panel_info.fb_num to 3. type: 3
- <6>[ 0.599151] mdp4_lcdc_vsync_init: ndx=0
- <3>[ 0.601409] pm_runtime: fail to wake up
- <4>[ 0.601470] [kmj] lcdc_LD9040_panel_power:enable:1
- <4>[ 0.602569] ld9040 lcdc_ld9040_panel_on + (0,0,0)
- <4>[ 0.602600] ld9040 : lcdc_config_gpios [1]
- <4>[ 0.602600] ld9040 start spi_init
- <4>[ 0.602630] ld9040 clk : 103, cs : 104, sdi : 106
- <4>[ 0.602661] ld9040 start ld9040_disp_powerup
- <4>[ 0.657440] ld9040 start ld9040_disp_on - HW Rev: 13
- <4>[ 0.788116] ld9040 ld9040_read_lcd_id: a1 3 22
- <4>[ 0.788116] ld9040 lcd EA8868 M3
- <4>[ 0.851501] ld9040 ACL_cutoff^set Percentage : 40!!
- <4>[ 0.852844] ld9040 ea8868_gamma_ctl 18 18
- <4>[ á 0.852935] ld9040 lcdc_ld9040_panel_on - (1,1,1)
- <4>[ 0.854400] mdp4_csc_config: Block type 10 isn't supported by CSC.
- <4>[ 0.854431] mdp4_csc_config: Block type 8 isn't supported by CSC.
- <6>[ 0.878387] Console: switching to colour frame buffer device 60x50
- <6>[ 0.896545] FrameBuffer[0] 480x800 size=4608000 bytes is registered successfully!
- <6>[ 0.896667] is_lpcharging_state: is_lpm_boot:0
- <4>[ 0.896881] load_565rle_image: Can not open /initlogo.rle
- <7>[ 0.897338] Registered led device: lcd-backlight
- <6>[ 0.897460] mdp4_lcdc_vsync_init: ndx=0
- <6>[ 0.897705] sec_getlog_supply_fbinfo: 0x48000000 480 800 32 2
- <4>[ 0.897796] ld90┤0 platform_device_register(&this_device) is done
- <6>[ 0.898437] hdmi_msm hdmi_msm.0: probe
- <6>[ 0.899078] hdmi_msm hdmi_msm.1: probe
- <6>[ 0.899261] hdmi_msm hdmi_msm.1: Features <val:0x80004481, HDMI:ON, HDCP:ON>
- <6>[ 0.899475] setting pdata->panel_info.fb_num to 1. type: 7
- <6>[ 0.900329] mdp4_dtv_vsync_init: ndx=0
- <6>[ 0.902496] FrameBuffer[1] 1920x1080 size=4149248 bytes is registered successfully!
- <6>[ 0.902984] mdp4_dtv_vsync_init: ndx=0
- <6>[ 0.903167] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group debb2208
- <6>[ 0.903350] hdmi_msm hdmi_msm.1: external_common_state_create: kobject_uevent(KOBJ_ADD)
- <6>[ 0.903442] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Enabled
- <7>[ 0.903778] hdmi_msm_init: success: DEBUG AUDIO EDID HPD HDCP DVI:0
- <6>[ 0.904998]
- <6>[ 0.904998] msm_vidc_enc: Inside vid_enc_init()
- <6>[ 0.905364]
- <6>Y 0.905364] msm_vidc_enc: Inside vid_enc_vcd_init()
- <6>[ 0.905670] is_lpcharging_state: is_lpm_boot:0
- <6>[ 0.905944] mhl_v2, Board : get_mhl_int_irq, rev:13
- <6>[ 0.906280] create mhl sysfile
- <6>[ 0.906738] input: sii9234_rcp as /devices/virtual/input/input0
- <6>[ 0.984588] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART
- <6>[ 0.985412] msm_serial_hs module loaded
- <6>[ 0.985595] msm_serial_hsl: detected port #1
- <6>[ 0.985839] msm_serial_hsl.1: ttyHSL1 at MMIO 0x19940000 (irq = 221) is a MSM
- <6>[ 0.986389] msm_serial_hsl: detected port #0
- <6>[ 0.986602] msm_serial_hsl.0: ttyHSL0 at MMIO 0x19c40000 (irq = 227) is a MSM
- <6>[ 0.986755] m3m_serial_hsl: console setup on port #0
- <6>[ 2.368896] console [ttyHSL0] enabled
- <6>[ 2.373077] msm_serial_hsl: driver initialized
- <6>[ 2.378082] msm_rotator_probe: rotator_hw_revision=1
- <6>[ 2.388244] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
- <6>[ 2.396331] kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
- <6>[ 2.403930] kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU
- <6>[ 2.416687] brd: module loaded
- <6>[ 2.421569] loop: module loaded
- <6>[ 2.424102] is_lpcharging_state: is_lpm_boot:0
- <4>[ 2.428314] ak8975 probe start!
- <4>[ 2.432342] sensor_power_on_vdd: vdd_2p85=1, vdd_1p8=1, vdd_2p_4=0, vdd_2p85_mag=0
- <4>[ 2.440032] ak8975 probe success!
- <6>[ 2.442474] is_lpcharging_state: is_lpm_boot:0
- <4>[ 2.446868] k3dh probe start!!
- <4>[ 2.449981] sensor_power_on_vdd: vdd_2p85=2, vdd_1p8=2, vdd_2p_4=0, vdd_2p85_mag=0
- <4>[ 2.457794] k3dh probe success!!
- <6>[ 2.460906] sec_jack:sec_jack_probe : Registering jack driver
- <6>[ 2.466491] input: sec_jack as /devices/virtual/input/input1
- <5>[ 2.472930] pm8xxx_upl_probe: OK
- <3>[ 2.476287] QSEECOM: qseecom_init: Failed to retrieve QSEE version information -22
- <6>[ 2.483367] is_lpcharging_state: is_lpm_boot:0
- <6>[ 2.487335] a2220_init
- <4>[ 2.489959] i2c-core: driver [audience_a2220] using legacy suspend method
- <4>[ 2.496520] i2c-core: driver [audience_a2220] using legacy resume method
- <4>[ 2.503387] level device init
- <4>[ 2.511352] audience_a2220 :a2220_ioctl : lsj:: a2220_firmware_buf = 78664
- <4>[ 2.517303] audience_a2220 :a2220_ioctl: creating thread..
- <4>[ 2.522979] init_a2220 -
- <4>[ 2.522979] audience_a2220 :a2220_init_thread
- <6>[ 2.529785] adie_codec_register_codec_operations: codec type 1
- <6>[ 2.536132] Loading pn544 driver
- <6>[ 2.538818] pn544_probe : IRQ num 628
- <6>[ 2.542694] pn544_probe : requesting IRQ 628
- <6>[ 2.547576] SCSI Media Changer driver v0.25
- <6>[ 2.551330] PPP generic driver version 2.4.2
- <6>[ 2.555511] PPP Deflate Compression module registered
- <6>[ 2.560211] PPP BSD Compression module registered
- <6>[ 2.567596] PPP MPPE Compression module registered
- <6>[ 2.571563] NET: Registered protocol family 24
- <6>[ 2.575866] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
- <6>[ 2.585571] CSLIP: code copyright 1989 Regents of the University of California.
- <6>[ 2.593292] tun: Universal TUN/TAP device driver, 1.6
- <6>[ 2.597839] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- <6>[ 2.605072] smsc911x: Driver version 2008-10-21
- <6>[ 2.608947] usbcore: registered new interface driver asix
- <6>[ 2.614105] usbcore: registered new interface driver cdc_ether
- <6>[ 2.619903] usbcore: registered new interface driver net1080
- <4>[ 2.623138] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init +
- <6>[ 2.632232] usbcore: registered new interface driver cdc_subset
- <6>[ 2.638183] usbcore: registered new interface driver zaurus
- <6>[ 2.643646] cdc_ncm: 04-Aug-2011
- <6>[ 2.646942] usbcore: registered new interface driver cdc_ncm
- <6>[ 2.652496] rmnet_init: SMD devices[8]
- <6>[ 2.660583] rmnet_init: SDIO devices[8]
- <3>[ 2.666198] msm_hsusb_smb328a_vbus_power attached 0
- <6>[ 2.672271] msm_otg msm_otg: success to host_notify_dev_register
- <6>[ 2.677581] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- <4>[ 2.678131] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 1
- <4>[ 2.690643] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 2
- <6>[ 2.690917] host driver registered w/ tranceiver
- <6>[ 2.691131] usbcore: registered new interface driver cdc_acm
- <6>[ 2.691162] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- <6>[ 2.691284] usbcore: registered new interface driver usblp
- <6>[ 2.691314] Initializing USB Mass Storage driver...
- <6>[ 2.691375] usbcore: registered new interface driver usb-storagd
- <6>[ 2.691406] USB Mass Storage support registered.
- <6>[ 2.691467] usbcore: registered new interface driver ums-alauda
- <6>[ 2.691528] usbcore: registered new interface driver ums-cypress
- <6>[ 2.691619] usbcore: registered new interface driver ums-datafab
- <6>[ 2.691680] usbcore: registered new interface driver ums-freecom
- <6>[ 2.691741] usbcore: registered new interface driver ums-isd200
- <6>[ 2.691802] usbcore: registered new interface driver ums-jumpshot
- <6>[ 2.691864] usbcore: registered new interface driver ums-karma
- <6>[ 2.691925] usbcore: registered new interface driver ums-onetouch
- <6>[ 2.692016] usbcore: registered new interface driver ums-sddr09
- <6>[ 2.692077] usbcore: registered new interface driver ums-sddr55
- <6>[ 2.692138] usbcore: registered new interface driver ums-usbat
- <6>[ 2.692199] usbcore: registered jew interface driver usb_ehset_test
- <6>[ 2.692504] peripheral driver registered w/ tranceiver
- <4>[ 2.692565] msm_otg_sm_work 1798 id=0 OTG_STATE_UNDEFINED
- <4>[ 2.819610] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 3
- <4>[ 2.825439] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 4
- <6>[ 2.832092] a2220_bootup_init: starting to load image (2459 passes)...
- <6>[ 2.832153] android_usb gadget: Mass Storage Function, version: 2009/09/11
- <6>[ 2.832183] android_usb gadget: Number ob LUNs=2
- <6>[ 2.832214] lun0: LUN: removable file: (no medium)
- <6>[ 2.832244] lun1: LUN: removable file: (no medium)
- <6>[ 2.832611] android_usb gadget: android_usb ready
- <6>[ 2.865936] DIAG registered SDIO device
- <6>[ 2.869171] diagchar initialized now
- <6>[ 2.872558] mousedev: PS/2 mouse device common for all mice
- <6>[ 2.879577] input: ffa-keypad as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-keypad/input/input2
- <6>[ 2.888610] is_lpcharging_state: is_lpm_boot:0
- <3>[ 2.892333] [TSP] mxt224_probe
- <6>[ 2.895690] input: sec_touchscreen as /devices/virtual/input/input3
- <4>[ 2.902069] mxt224_power_on: enter
- <3>[ 2.905578] [TSP POWER ON L1 3.3 enable
- <3>[ 2.909393] [TSP POWER ON L4 1.8 enable
- <4>[ 2.912902] mxt224_power_on: exit
- <4>[ 2.918060] msm_otg_sm_work 1801 id=1 OTG_STATE_UNDEFINED
- <3>[ 2.922576] msm_hsusb_pmic_id_notif_init: USB_ID is not routed to PMIC
- <6>[ 2.929534] msm_otg_suspend: usb in low power mode
- <4>[ 2.968017] mxt224_power_on is finished
- <6>[ 3.012237] qt602240_ts 0-004a: family = 0x81, variant = 0x1, version = 0x10, build = 170
- <3>[ 3.019531] [TSP] family = 0x81, variant = 0x1, version = 0x10, build = 170
- <3>[ 3.050933] [TSP] TSP chip is MXT224-E
- <3>[ 3.054321] [TSP]user_info_value is 0
- <3>[ 3.147949] [TSP] ta_status is 0
- <3>[ 3.150115] [TSP] mxt224_ta_probe
- <3>[ 3.162200] [TSP]TA_probe MXT224E T48 Byte2 is 114
- <3>[ 3.168304] [TSP]calibration success!!!
- <3>[ 3♫171691] [TSP] mxt224_probe e
- <3>[ 3.174591] [TSP] Calibration End!!!!!!
- <3>[ 3.178253] [TSP] Clearing unused slots
- <6>[ 3.182739] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-pwrkey/input/input4
- <3>[ 3.193328] [TSP] Calibration End!!!!!!
- <3>[ 3.196014] [TSP] Clearing unused slots
- <6>[ 3.201141] using rtc device, pm8xxx_rtc, for alarms
- <3>[ 3.205047] [TSP] Calibration!!!!!!
- <6>[ 3.208496] rtc-pm8xxx rtc-pm8xxx: rtc core: registEred pm8xxx_rtc as rtc0
- <6>[ 3.215911] i2c /dev entries driver
- <3>[ 3.218963] [TSP] Calibration End!!!!!!
- <3>[ 3.222595] [TSP] Clearing unused slots
- <6>[ 3.229125] is_lpcharging_state: is_lpm_boot:0
- <6>[ 3.232604] yda165:yda165_init
- <6>[ 3.235687] yda165:yda165_probe
- <3>[ 3.238861] yda165:yda165_probe
- <5>[ 3.241882] yda165_probe: OK
- <6>[ 3.244964] yda165:load_ampgain completed
- <6>[ 3.248870] is_lpcharging_state: is_lpm_boot:0
- <4>[ 3.253448] sensor_power_on_vdd: vdd_2p85=3, vdd_1p8=3, vdd_2p_4=0, vdd_2p85_mag=0
- <6>[ 3.260986] input: proximity_sensor as /devices/virtual/input/input5
- <4>[ 3.267395] opt_i2c_probe(839):
- <3>[ 3.270294] opt_i2c_probe, 840 : start!!!
- <4>[ 3.274322] GP2A opt i2c attach success!!!
- <3>[ 3.278350] GP2A opt i2c attach success!!!
- <3>[ 3.282440] opt_i2c_probe, 859 : end!!!
- <4>[ 3.286376] opt_i2c_client : (0xdea1e600)
- <4>[ 3.290710] opt_i2c_write(497): : 0x4, 0x2
- <4>[ 3.294311] gp2a_opt_probe is OK!!
- <6>[ 3.298278] is_lpcharging_state: is_lpm_boot:0
- <6>[ 3.303039] input: light_sensor as /dEvices/virtual/input/input6
- <6>[ 3.308898] input: fsa9480 as /devices/i2c-5/5-0025/input/input7
- <6>[ 3.316864] fsa9480 5-0025: fsa9480_reg_init dev ID: 0x0
- <4>[ 3.321594] i2c-core: driver [fsa9480] using legacy resume method
- <6>[ 3.327453] is_lpcharging_state: is_lpm_boot:0
- <4>[ 3.332031] [GYRO] k3g_probe start!
- <6>[ 3.335693] msm_otg_resume: usb exited from low power mode
- <4>[ 3.340789] msm_otg_irq: IRQ state: b_idle otgsc = 92c0f00
- <6>[ 3.346435] [OTG] msm_otg_start_peripheral, on = 1
- <4>[ 3.351135] sensor_power_on_vdd: vdd_2p85=4, vdd_1p8=4, vdd_2p_4=0, vdd_2p85_mag=0
- <6>[ 3.359222] input: gyro_sensor as /devices/virtual/input/input8
- <6>[ 3.366210] input: orientation_sensor as /devices/virtual/input/input9
- <3.[ 3.371917] param_sec_operation: filp_open failed. (-2)
- <3>[ 3.377075] sec_open_param PARAM OPEN FAIL
- <3>[ 3.381103] sec_switch_init_work error value = 3
- <6>[ 3.381591] lirc_dev: IR Remote Control driver registered, major 239
- <6>[ 3.381622] IR NEC protocol handler initialized
- <6>[ 3.381652] IR RC5(x) protocol handler initialized
- <6>[ 3.381683] IR RC6 protocol handler initialized
- <6>[ 3.381683] IR JVC protocol handler initialized
- <6>[ 3.381713] IR Sony protocol handler initialized
- <6>[ 3.381744] IR RC5 (streamzap) protocol handler initi`lized
- <6>[ 3.381774] IR LIRC bridge handler initialized
- <6>[ 3.381805] Linux video capture interface: v2.00
- <6>[ 3.381927] usbcore: registered new interface driver uvcvideo
- <6>[ 3.381958] USB Video Class driver (v1.1.0)
- <6>[ 3.382965] is_lpcharging_state: is_lpm_bOot:0
- <4>[ 3.383117] ############# M5MO probe ##############
- <7>[ 3.383239] [M5MO] m5mo_sensor_probe : E
- <7>[ 3.383239] [M5MO] m5mo_i2c_init : E
- <7>[ 3.383300] [M5MO] m5mo_i2c_probe : E
- <7>[ 3.383331] [M5MO] m5mo_i2c_probe : m5mo_i2c_probe X
- <7>[ 3.383361]
- <6>[ 3.467376] is_lpcharging_state: is_lpm_boot:0
- <4>[ 3.471099] ############# S5K5BAFX probe ##############
- <7>[ 3.476379] [5BAFX] s5k5bafx_sensor_probe : E
- <7>[ 3.48 560] [5BAFX] s5k5bafx_i2c_init : E
- <7>[ 3.484466] [5BAFX] s5k5bafx_i2c_probe : E
- <7>[ 3.488555] [5BAFX] s5k5bafx_i2c_probe : X
- <3>[ 3.492706] [5BAFX] s5k5bafx_sensor_probe:1370:rc = 0
- <6>[ 3.498962] I2C radio driver for Qualcomm FM Radio Transceiver , Version 1.0.0
- <6>[ 3.505737] max17040_probe: MAX17043 driver Loading!
- <6>[ 3.510284] max17040_get_version :
- <6>[ 3.514434] max17040 15-0036: MAX17040 Fuel-Gauge Ver 03
- <6>[ 3.519714] max17040_get_rcomp : current rcomp = 0xc71f(199)
- <6>[ 3.525787] max17040_get_rcomp : current rcomp = 0xc71f(199)
- <4>[ 3.534149] i2c-core: driver [max17040] using legacy suspend method
- <4>[ 3.539520] i2c-core: driver [max17040] using legacy resume method
- <6>[ 3.545684M smb328a_probe: SMB328A driver Loading!
- <6>[ 3.550476] is_lpcharging_state: is_lpm_boot:0
- <6>[ 3.555999] smb328a_check_bmd_disabled : return ture : reg(0x5)=0x8b (0x80)
- <6>[ 3.563629] smb328a_check_bmd_disabled : return ture : reg(0x5)=0x8b (0x80)
- <4>[ 3.570159Y i2c-core: driver [smb328a] using legacy suspend method
- <4>[ 3.575866] i2c-core: driver [smb328a] using legacy resume method
- <6>[ 3.582641] msm_adc successfully registered
- <5>[ 3.586822] tsens_tm_probe: OK
- <3>[ 3.589355] pm8xxx_init_adc: adc_channel_open() failed.
- <3>[ 3.594299] pm8xxx_tm_probe: Unable to initialize adc
- <4>[ 3.599426] pm8xxx-tm: probe of pm8xxx-tm failed with error -9
- <6>[ 3.605529] pm8xxx_tm_probe: OK
- <6>[ 3.608856] device-mapper: uevent: version 1.0.3
- <6>[ 3.613342] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
- <6>[ 3.621551] Bluetooth: HCI UART driver ver 2.2
- <6>[ 3.625732] Bluetooth: HCI H4 protocol initialized
- <6>[ 3.630584] Bluetooth: HCI_IBS protocol initialized
- <6>[ 3.635345] Bluetooth: BlueSleep Mode Driver Ver 1.1
- <6>[ 3.641143] cpuidle: using governor ladder
- <6>[ 3.644439] cpuidle: using governor menu
- <6>[ 3.647949] usb_reset: usb: notify offline
- <7>[ 3.647979] usb: composite_disconnect
- <7>[ 3.648010] usb: android_disconnect schedule_work
- <7>[ 3.648284] usb: android_work config= (null),connected=0,sw_connected=0
- <6>[ 3.648315] android_work: did not send uevent (0 0 (null))
- <6>[ 3.673431] mmc0: mci-version: 0
- <3>[ 3.676391] mmc0: No card detect facilities available
- <6>[ 3.681610] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma 18 dmacrcri 1
- <6>[ 3.689605] mmc0: 8 bit data mode enabled
- <6>[ 3,693511] mmc0: 4 bit data mode disabled
- <6>[ 3.697662] mmc0: polling status mode disabled
- <6>[ 3.702026] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
- <6>[ 3.707672] imc0: Slot eject status = 0
- <6>[ 3.711547] mmc0: Power save feature enable = 1
- <6>[ 3.716003] mmc0: DM non-cached buffer at ffda0000, dma_addr 0x5d900000
- <6>[ 3.722656] mmc0: DM cmd busaddr 0x5d900000, cmdptr busaddr 0x5d917f40
- <6>[ 3.729370] mmc1: mci-version: 0
- <6>[ 3.732788] mmc1: Qualcomm MSM SDCC-core at 0x0000000012140000 irq 135,0 dma 19 dmacbcri 4
- <6>[á 3.740600] mmc1: 8 bit data mode enabled
- <6>[ 3.744628] mmc1: 4 bit data mode disabled
- <6>[ 3.748657] mmc1: polling status mode disabled
- <6>[ 3.753051] mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
- <6>[ 3.758789] mmc1: Slot eject status = 0
- <6>[ 3.762512] mmc1: Power save feature enable = 1
- <6>[ 3.767089] mmc1: DM non-cached buffer at ffd80000, dma_addr 0x5d920000
- <6>[ 3.773651] mmc1: DM cmd busaddr 0x5d920000, cmdptr busaddr 0x5d937f40
- <6>[ 3.780456] mmc2: mci-version: 0
- <6>[ 3.783905] mmc2: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,642 dma 20 dmacrcri 2
- <6>[ 3.791870] mmc2: 8 bit data mode disabled
- <6>[ 3.795867] mmc2: 4 bit data mode enabled
- <6>[ 3.798278] mmc0: new high speed MMC card at address 0001
- <6>[ 3.805267] mmc2: polling status mode disabled
- <6>[ 3.805297] mmcblk0: mmc0:0001 KYL00M 14.6 GiB
- <6>[ 3.814270] mmc2: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
- <6>[ 3.814300] mmcblk0boot0: mmc0:0001 KYL00M partition 1 512 KiB
- <6>[ 3.825714] mmc2: Slot eject status = 0
- <6>[ 3.825744] mmcblk0boot1: mmc0:0001 KYL00M partition 2 512 KiB
- <6>[ 3.835449] mmc2: Power save feature enable = 1
- <6>[ 3.839477] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25
- p26 p27 p28 >
- <6>[ 3.851409] mmc2: DM non-cached buffer at ffd60000, dma_addr 0x5d940000
- <6>[ 3.858032] mmc2: DM cmd busaddr 0p5d940000, cmdptr busaddr 0x5d957f40
- <6>[ 3.859619] mmcblk0boot1: unknown partition dable
- <6>[ 3.869567] mmc3: mci-version: 0
- <3>[ 3.872558] mmc3: No card detect facilities available
- <6>[ 3.874023] mmcblk0boot0: unknown partition table
- <6>[ 3.882568] mmc3: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,0 dma 21 dmacrcri 5
- <6>[ 3.890563] mmc3: 8 bit data mode disabled
- <6>[ 3.894561] mmc3: 4 bit data mode enabled
- <6>[ 3.898559] mmc3: polling status mode disabled
- <6>[ 3.903045] mmc3: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
- <6>[ 3.908630] mmc3: Slot eject status = 0
- <6>[ 3.912506] mmc3: Power save feature enable = 1
- <6>[ 3.916961] mmc3: DM non-cached buffer at ffd40000, dma_addr 0x5d980000
- <6>[ 3.923614] mmc3: DM cmd busaddr 0x5d980000, cmdptr busaddr 0x5d997f40
- <6>[ 3.930328] mmc4: mci-version: 0
- <6>[ 3.933685] mmc4: Qualcomm MSM SDCC-core at 0x0000000012200000 irq 220,0 dma 21 dmacrcri 14
- <6>[ 3.941680] mmc4: 8 bit data mode disabled
- <6>[ 3.945678] mmc4: 4 bit data mode enabled
- <6>[ 3.949676] mmc4: polling status mode disabled
- <6>[ 3.954101] mmc4: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
- <6>[ 3.959808] mmc4: Slot eject status 9 0
- <6>[ 3.963562] mmc4: Power save feature enable = 1
- <6>[ 3.968078] mmc4: DM non-cached buffer at ffd20000, dma_addr 0x5d9a0000
- <&>[ 3.974331] mmc4: DM cmd busaddr 0x5d9a0000, cmdptr busaddr 0x5d9b7f40
- <7>[ 3.982025] Registered led device: camera:flash0
- <7>[ 3.985870] Registered led device: camera:flash1
- <6>[ 3.992492] usbcore: registered new interface driver usbhid
- <6>[ 3.997161] usbhid: USB HID core driver
- <6>[ 4.003112] logger: created 512K log 'log_main'
- <6>[ 4.006866] loggar: created 256K log 'log_events'
- <6>[ 4.011596] logger: created 512K log 'log_radio'
- <6>[ 4.016113] logger: created 256K log 'log_system'
- <6>[ 4.020690] sec_getlog_supply_loggerinfo: 0xc11cb7f8 0xc124b7f8 0xc12cb7f8 0xc130b7f8
- <6>[ 4.029388] zram: Created 1 device(s) ...
- <6>[ 4.033020] usbcore: registered new interface driver snd-usb-audio
- <6>[ 4.039825] msm-cpu-dai msm-cpu-dai.0: asoc_msm_cpu_probe: dev name msm-cpu-dai.0
- <6>[ 4.046600] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
- <6>[ 4.054870] msm-dsp-audio msm-dsp-audio.0: msm_pcm_probe: dev name msm-dsp-audio.0
- <7>[ 4.058868] gpio_request: gpio-251 (SD_WP_Switch) status -22
- <3>[ 4.058898] msm_sdc3_get_wpswitch:Failed to request GPIO 251
- <4>[ 4.058959] mmc2: host Σoes not support reading read-only switch. assuming write-enable.
- <6>[ 4.060913] mmc2: new high speed SDHC card at address 0001
- <6>[ 4.087036] mmcblk1: mmc2:0001 00000 29.2 GiB
- <6>[ 4.091674] asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok
- <6>[ 4.098754] ALSA device list:
- <6>[ 4.100769] #0: msm-audio
- <6>[ 4.100891] mmcblk1: p1
- <6>[ 4.106689] oprofile: using arm/armv7-scorpionmp
- <6>[ 4.110839] GACT probability NOT on
- <6>[ ┤.114135] Mirror/redirect action on
- <6>[ 4.117767] u32 classifier
- <6>[ 4.120544] Actions configured
- <6>[ 4.◄23840] Netfilter messages via NETLINK v0.30.
- <6>[ 4.128631] nf_conntrack version 0.5.0 (12489 buckets, 49956 max)
- <6>[ 4.135131] ctnetlink v0.93: registering with nFnetlink.
- <6>Z 4.139984] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- <6>[ 4.146911] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- <6>[ 4.153320] xt_time: kernel timezone is -0000
- <6>[ 4.157196] ip_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 4.162536] arp_tables: (C) 2002 David S. Miller
- <6>[ 4.167022] TCP cubic registered
- <6>[ 4.170135] Initializing XFRM netlink socket
- <6>[ 4.174835] NET: Registered protocol family 10
- <6>[ 4.180664] Mobile IPv6
- <6>[ 4.182189] ip6_tables: (C) 2000-2006 Netfilter Core Team
- <6>[ 4.187683] IPv6 over IPv4 tunneling driver
- <6>[ 4.192779] NET: Registered protocol family 17
- <6>[ 4.196289] NET: Registered protocol family 15
- <6>[ 4.200988] Bluetooth: RFCOMM TTY layer initialized
- <6>[ 4.205566] Bluetooth: RFCOMM socket layer initialized
- <6>[ 4.210754] Bluetooth: RFCOMM ver 1.11
- <6>[ 4.214416] Bluetooth: BNEP (Ethepnet Emulation) ver 1.3
- <6>[ 4.219726] Bluetooth: BNEP filters: protocol multicast
- <6>[ 4.224975] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- <6>[ 4.230987] NET: Registered protocol family 35
- <5>[ 4.235412] Registering the dns_resolver key type
- <6>[ 4.239990] VFP support v0.3: implementor 51 architecture 64 part 2d variant 0 rev 0
- <5>[ 4.248748] Registering SWP/SWPB emulation handler
- <6>[ 4.264892] clock_late_init() disabled 182 unused clocks
- <6>[ 4.289550] MSM Watchdog Initialized
- <3>[ 4.292968] set_dload_mode <0> ( C0016F10 )
- <4>[ 4.297332] [TKEY] touchkey_init START
- <6>[ 4.300292] is_lpcharging_state: is_lpm_boot:0
- <4>[ 4.305664] [TKEY] touchkey_init F/W version: 0x12, Module version:0x22, HW_REV: 0xd
- <4>[ 4.312622] [TKEY] sec i2c_touchkey_probe
- <6>[ 4.316619] input: sec_touchkey as /devices/virtual/input/input10
- <4>[ 4.323150] [TKEY] enter touchkey_auto_calibration
- <4>[ 4.378967] [TKEY] after touchkey_autg_calibration result = 1
- <4>[ 4.383972] [TKEY] touchkey_init END
- <6>[ 4.388061] rtc-pm8xxx rtc-pm8xxx: setting system clock to 2015-01-20 23:13:49 UTC (1421795629)
- <6>[ 4.396331] sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loading
- <6>[ 4.403808] sec_bat_get_lpcharging_state: LP charging:0
- <3>[ 4.410797] sec_bat_measure_work: adc work already on a queue
- <6>[ 4.417480] Freeing init memory: 276K
- <7>[ 4.426300] SELinux: 1024 avtab hash slots, 2977 rules.
- <7>[ 4.432006] SELinux: 1024 avtab hash slots, 2977 rules.
- <7>[ 4.436462] SELinux: 1 users, 2 roles, 307 types, 1 bools, 1 sens, 1024 cats
- <7>[ 4.443389] SELinux: 84 classes, 2977 2ules
- <7>[ 4.448822] SELinux: Completing initialization.
- <7>[ 4.452514] SELinux: Setting up existing superblocks.
- <7>[ 4.457672] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
- <6>[ 4.464843] pmic8058_xoadc:The offset for AMUX calibrationwas -574
- <3>[ 4.471038] param_sec_operation: filp_open failed. (-2)
- <7>[ 4.471069] SELinux: initialized (dev rootfc, type rootfs), uses genfs_contexts
- <7>[ 4.471801] SELinux: initialized (dev bdev, type bdev), not configurσd for labeling
- <7>[ 4.471862] SELinux: initialized (der proc, type proc), uses genfs_contexts
- <7>[ 4.471923] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 4.471984] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
- <7>[ 4.480743] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
- <7>[ 4.480773] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
- <7>[ 4.480834] SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling
- <7>[ 4.480895] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
- <7>[ 4.480957] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
- <7>[ 4.481109] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 4.481170] SELinux: initialized (de÷ sysfs, type sysfs), uses genfs_contexts
- <3>[ 4.565063] sec_open_param PARAM OPEN FAIL
- <3>[ 4.569030] sec_switch_init_work error value = 3
- <6>[ 4.573760] sec_jack:sec_jack_det_irq_handler : ready = 1.
- <6>[ 4.579254] sec_jack: ear micbias off
- <5>[ 4.765960] type=1403 audit(1421795629.860:2): policy loaded auid=4294967295 ses=4294967295
- <4>[ 4.773590] SELinux: Loaded policy from /sepolicy
- <4>[ 4.781036] SELinux: Loaded file_contexts from /file_contexts
- <5>[ 4.786224] type=1404 audit(1421795629.880:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
- <3>[ 5.568420] param_sec_operation: filp_open failed. (-2)
- <36[ 5.572753] sec_open_param PARAM OPEN FAIL
- <3>[ 5.576751] sec_switch_init_work error value = 3
- <4>[ 5.781341] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 5
- <4>[ 5.787414] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 6
- <4>[ 5.793792] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 7
- <6>[ 5.828430] a2220_bootup_init: firmware loaded successfully
- <4>[ 6.038787] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 8
- <4>[ 6.044555] audience_a2220 :a2220_bootup_init : get_hw_rev of Target = 13
- <4>[ 6.051391] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 9
- <4>[ 6.058166] audience_a2220 :execute_cmdmsg : ...go to suspend first
- <4>[ 6.064392] audience_a2220 :A2220_bootup_init : lsj::a2220_bootup_init 10
- <4>[ 6.198486] audience_a2220 :a2220_bootup_init : lsj::a2220_bootup_init 11
- <6>[ 6.204315] a2220_bootup_init: initialized!
- <4>[ 6.208526] audience_a2220 :a2220_bootup_init : a2220_bootup_init - finish
- <3>[ 6.408538] sec_bat_polling_work: adc work already on a queue
- <3>[ 6.578521] param_sec_operation: filp_open failed. (-2)
- <3>[ 6.582794] sec_open_param PARAM OPEN FAIL
- <3>[ 6.586853] sec_switch_init_work error value = 3
- <3>[ 7.588562] param_sec_operation: filp_open failed. (-2)
- <3>[ 7.592834] sec_open_param PARAM OPEN FAIL
- <3>[ 7.596984] sec_switch_init_work error value = 3
- <6>[ 7.642913] sec_bat_get_lpcharging_state: LP charging:0
- <3>[ 7.651794] healthd: wakealarm_init: timerfd_create failed
- <3>[ 7.6519$7] init: invalid uid 'fm_radio'
- <6>[ 7.718688] smb328a_check_bmd_disabled : return ture : reg(0x5)=0x8b (0x80!
- <7>[ 8.179748] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 8.186401] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 8.193634] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <7>[ 8.↕00897] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
- <3>[ 8.207824] android_usb: already disabled
- <3>[ 8.212677] init: Unable to open persistent property directory /data/property errno: 2
- <4>[ 8.224670] set_freq_limit: 0x8 0, min 384000, max 1242000
- <3>[ 8.224884] healthd: wakealarm_init: timerfd_create failed
- <4>[ 8.244384] CPU1: Booted secondary processor
- <4>[ 8.248352] set_freq_limit: 0x8 -1, min 384000, max 1512000
- <6>[ 8.255187] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,errors=panic
- <7>[ 8.264617] SELinux: initialized (dev mmcblk0p25, type ext4), uses xattr
- <4>[ 8.272155] set_freq_limit: 0x8 0, min 384000, max 1242000
- <3>[ 8.364227] android_usb: already disabled
- <6>[ 8.373199] adb_open
- <6>[ 8.415313] heAlthd: battery l=100 v=4176 t=27*4 h=2 st=2 chg=a
- <3>[ 8.605010] sec_switch_init_work value = 1
- <3>[ 8.608734] sec_switch_set_vbus_status USB_VBUS_AP_ON 2
- <4>[ 8.625244] fsa9480_manual_switching(0)
- <6>[ 9.199981] msmsdcc_runtime_suspend: Enter WIFI suspend
- <6>[ 9.338623] fsa9480 5-0025: fsa9480_init_detect
- <6>[ `9.343536] fsa9480 5-0025: dev1: 0x4, dev2: 0x0
- <6>[ 9.347503] fsa9480 5-0025: usb connect
- <3>[ ↓.351287] fsa9480_usb_cb attached 1
- <3>[ 9.354980] [TSP] mxt224_ta_probe
- <3:[ 9.369628] [TSP]TA_probe MXT224E T48 Byte2 is 114
- <6>[ 9.373779] sec-battery sec-battery: sec_bat_set_property: cable was changed(3)
- <3>[ 9.381225] [TSP] Calibration!!!!!!
- <3>[ 9.402282] [TSP] Calibration End!!!!!!
- <3>[ 9.405487] [TSP] Clearing unused slots
- <6>[ 10.488647] smb328a 15-0034: smb328a_set_charging_current :
- <6>[ 10.494171] smb328a 15-0034: smb328a_set_command_reg : reg (0x31) = 0x0
- <6>[ 10.501617] smb328a_set_command_reg : => reg (0x31) = 0xa9
- <6>[ 10.507781] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x0) = 0x31
- <6>[ 10.516784] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x0) = 0x17
- <6>[ 10.523925] sib328a 15-0034: smb328a_charger_function_conrol : reg (0x1) = 0x5
- <6>[ 10.531341] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x1) = 0x10
- <6>[ 10.538665] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x2) = 0xca
- <6>[ 10.545928] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x3) = 0x1a
- <6>[ 10.553497] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x3) = 0xda
- <6>[ 10.560791] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x4) = 0x44
- <6>[ 10.568359▌ smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x4) = 0x4d
- <6>[ 10.575592] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x5) = 0x8b
- <6>[ 10.583251] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x5) = 0x0
- <6>[ 10.590423] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x6) = 0x5c
- <6>[ 10.597869] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x6) = 0x4d
- <6>[ 10.605255] smb328A 15-0034: smb328a_charger_&unction_conrol : reg (0x7) = 0x36
- <6>[ 10.612823] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x7) = 0xf6
- <6>[ 10.620025] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x8) = 0x0
- <6>[ 10.627258] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x9) = 0x0
- <6>[ 10.634796] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x9) = 0x1
- <6>[ 10.641510] smb328a 15-0034: smb328a_get_input_current_limit :
- <6>[ 10.647735] smb328a 15-0034: smb328a_get_input_current_limit : reg (0x1) = 0x10
- <6>[ 10.654602] smb328a 15-0034: smb328a_get_input_current_limit : get icl = 450, data = 0
- <6>[ 10.662963] smb328a 15-0034: smb328a_get_float_voltage : reg (0x2) = 0xca, float vol = 4200
- <6>[ 10.671691] smb328a 15-0034: smb328a_set_top_off : reg (0x0) = 0x17
- <6>[ 10.677734] smb328a 15-0034: smb328a_set_top_off : => reg (0x0) = 0x17
- <6>[ 10.684082] smb328a 15-0034: smb328a_set_top_off : reg (0x7) = 0xf6
- <6>[ 10.690612] smb328a 15-0034: smb328a_set_top_off : => ree (0x7) = 0xf6
- <6>[ 10.697113] smb328a 15-0034: smb328a_enable_charging :
- <6>[ 10.701934] smb328a 15-0034: smb328a_enable_charging : reg (0x31) = 0xa9
- <6>[ 10.708862] smb328a_enable_charging : => reg (0x31) = 0xa9
- <6>[ 10.713653] smb328a 15-0034: smb328a_watchdog_control : (1)
- <6>[ 10.720001] smb328a 15-0034: smb328a_watchdog_control : reg (0x4) = 0x4d
- <6>[ 10.726593] smb328a 15-0034: smb328a_watchdog_control : => reg (0x4) = 0x4f
- <6>[ 10.734069] healthd: battery l=100 v=4201 t=27.4 h=2 st=2 chg=u
- <6>[ 10.811950] smb328a_int_work_func
- <6>[ 10.815185] smb328a_int_work_func : reg (0x37) = 0x0
- <6>[ 10.820373] smb328a_int_work_func : reg (0x36) = 0x7
- <6>[ 10.825286] sec_bat_set_property: 1
- <6>[ 10.828002] sec_bat_set_property: charger inserted!!
- <3>[ 11.286346] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
- <4>[ 11.286468] ld9040 lcdc_ld9040_panel_off + (1,1,1)
- <4>[ 11.418640] ld9040 : lcdc_config_gpios [0]
- <4>[ 11.418701] ld9040 start ld9040_disp_powerdown
- <4>[ 11.418762] ld9040 lcdc_ld9040_panel_off -
- <4>[ 11.418823] [kmj] lcdc_LD9040_panel_power:enable:0
- <4>[ 11.450988] [kmj] lcdc_LD9040_panel_power:enable:1
- <4>[ 11.451751] ld9040 lcdc_ld9040_panel_on + (0,0,0)
- <4>Z 11.451843] ld9040 : lcdc_config_gpios [1]
- <4>[ 11.451904] ld9040 start spi_init
- <4>[ 11.451965] ld9040 clk : 103, cs : 104, sdi : 106
- <4>[ 11.452026] ld9040 start ld9040_disp_powerup
- <4>[ 11.508636] ld9040 start ld9040_disp_on - HW Rev: 13
- <4>[ 11.512817] ld9040 LCD_M3 : 1
- <4>[ 11.517883] ld9040 ACL_cutoff_set Percentage : 40!!
- <4>[ 11.521789] ld9040 ea8868_gamma_ctl 18 18
- <4>[ 11.521881] ld9040 lcdc_ld9040_panel_on - (1,1,1)
- <4>[ 11.525787] mdp4_csc_config: Block type 10 isn't supported by CSC.
- <4>[ 11.525817] mdp4_csc_config: Block type 8 isn't supportσd by CSC.
- <6>[ 11.886444] EXT4-fs (mmcblk0p26): mounted filesystem with ordered data mode. Opts: barrier=1
- <7>[ 11.894317] SELinux: initialized (dev mmcblk0p26, type ext4), uses xattr
- <6>[ 11.931793] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,errors=panic
- <7>[ 11.941497] SELinux: initialized (dev mmcblk0p25, type ext4), uses xattr
- <4>[ 12.200286] ld9040 get_gamma_value_from_bl >>> bl_value:160, gamma_value: 13.
- <4>[ 12.200317] ld9040 brightness!!! bl_level=160, tune_level=13 curr=18
- <4>[ 12.217620] ld9040 ea8868_gamma_ctl 13 13
- <6>[ 12.237579] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts: errors=panic
- <7>[ 12.245941] SELinux: initialized (dev mmcblk0p24, type ext4), uses xattr
- <7>[ 12.280151] usb: enable_store f:adb
- <6>[ 12.283020] adb_bind_config
- <4>[ 12.397827] msm_otg_irq: IRQ state: b_peripheral otgsc = 9202f20
- <7>[ 12.552947] usb: android_work config= (null),connected=1,sw_connected=0
- <4>[ 12.559082] msm_otg_irq: IRQ state: b_peripheral otgsc = 9200f20
- <6>[ 12.566894] android_work: sent uevent USB_STATE=CONNECTED
- <6>[ 12.711700] msm_hsusb msm_hsusb: PCI intr missedset speed explictly
- <7>[ 12.761718] usb: set_config_number single config
- <7>[ 12.765562] usb: set_interface_count next_interface_id=1
- <7>[ 12.780975] usb: set_config_number single config
- <7>[ 12.784942] usb: set_interface_count next_interface_id=1
- <7>[ 12.790496] usb: set_config_number single config
- <7>[ 12.794830] usb: set_interface_count next_interface_id=1
- <6>[ 12.800354] android_usb gadget: high speed config #1: android
- <7>[ 12.806518] usb: android_work config=c0cc91cc,connected=1,sw_connected=1
- <6>[ 12.812988] android_work: sent uevent USB_STATE=CONFIGURED
- <7>[ 13.467254] usb: set_config_number single config
- <7>[ 13.471069] usb: set_interface_count next_interface_id=1
- <7>[ 13.476959] usb: set_config_number single config
- <7>Y 13.480957] usb: set_interface_count next_interface_id=1
- <4>[ 17.277526] adbd (166): /proc/166/oom_adj is deprecated, please use /proc/166/oom_score_adj instead.
- <6>[ 48.506072] healthd: battery l=100 v=4200 t=28.1 h=2 st=2 chg=u
- <4>[ 73.146942] ld9040 get_gamma_value_from_bl >>> bl_value:10, gamma_value: 0.
- <4>[ 73.147003] ld9040 brightness!!! bl_level=10, tune_level=0 curr=13
- <4>[ 73.162689] ld9040 ACL_cutoff_set Percentage : off!!
- <4>[ 73.168426] ld9040 ea8868_gamma_ctl 0 0
- <6>[ 89.506652] healthd: battery l=100 v=4201 t=28.4 h=2 st=2 chg=u
- <4>[ 112.877105] msm_otg_irq: IRQ state: b_peripheral otgsc = 92c0120
- <6>[ 112.882690] [OTG] msm_otg_start_peripheral, on = 0
- <4>[ 112.887207] off mute_switch
- <6>[ 112.890319] usb_do_work: usb: notify offline
- <7>[ 112.894226] usb: composite_disconnect
- <6>[ 112.898223] adb_release
- <6>[ 112.902801] adb_open
- <6>[ 112.904113] adb_bind_config
- <7>[ 112.907287] usb: android_disconnect force_disconnect
- <7>[ 112.911773] usb: android_disconnect schedule_work
- <7>[ 112.917236] usb: android_work config= (null),connected=0,sw_connected=1
- <6>[ 112.923431] android_work: sent uevent USB_STATE=DISCONNECTED
- <3>[ 113.140716] msm_hsusb_pmic_id_notif_init: USB_ID is not routed to PMIC
- <6>[ 113.147003] smb328a_int_work_func
- <6>[ 113.150756] smb328a_int_work_func : reg (0x37) = 0x2
- <6>[ 113.155639] smb328a_int_work_func : reg (0x36) = 0x0
- <6>[ 113.160827] sec_bat_set_property: 2
- <6>[ 113.163482] sec_bat_set_property: charger removed!!
- <6>[ 113.170837] msm_otg_suspend: usb in low power mode
- <6>[ 114.292083] sec_bat_measure_work : dcin nok, but still charging, just disable charging!
- <4>[ 114.299682] tsp_set_unknown_charging_cable 0
- <3>[ 114.304229] [TSP] mxt224_ta_probe
- <3>[ 114.325012] [TSP]TA_probe MXT224E T48 Byte2 is 114
- <6>[ 114.330566] sec_bat_handle_unknown_disable : cable_type = 1
- <6>[ 114.335418] smb328a 15-0034: smb328a_disable_charging :
- <6>[ 114.342956] smb328a 15-0034: smb328a_disable_charging : reg (0x31) = 0xa9
- <6>[ 114.349548] smb328a_disable_charging : => reg (0x31) = 0xb9
- <6>[ 114.354461] smb328a 15-0034: smb328a_watchdog_control : (0)
- <6>[ 114.360748] smb328a 15-0034: smb328a_watchdog_control : reg (0x4) = 0x4f
- <6>[ 114.367340] smb328a 15-0034: smb328a_watchdog_control : => reg (0x4) = 0x4d
- <6>[ 114.374847] healthd: battery l=100 v=4201 t=28.5 h=2 st=3 chg=u
- ,7>[ 117.645690] [TSP] ID-0,UD:1
- <4>[ 117.661499] ld9040 get_gamma_value_from_bl >>> bl_value:160, gamma_value: 13.
- <4>[ 117.661560] ld9040 brightness!!! bl_level=160, tune_level=13 curr=0
- <3>[ 117.675384] [TSP] t: 6, a: 0
- <4>[ 117.681304] ld9040 ACL_cutoff_set Percentage : 40!!
- <4>[ 117.686614] ld9040 ea8868_gamma_ctl 13 13
- <7>[ 117.794128] [TSP] ID-0,UD:0
- <7>[ 118.995758] [TSP] ID-0,UD:1
- <3>[ 119.020019] [TSP] t: 6, a: 0
- <3>[ 119.022369] [TSP] calibration was good
- <3>[ 119.027832] [TSP] Clearing unused slots
- <7>[ 119.155731] [TSP] ID-0,UD:0
- <7>[ 127.031829] SELinux: initialized (dev mmcblk1p1, type vfat), uses genfs_contexts
- <3>[ 127.043457] init: no such service 'fuse_sdcard1'
- <7>[ 128.616363] [TSP] ID-0,UD:1
- <7>[ 128.'18536] [TSP] ID-0,UD:0
- <7>[ 129.503540] [TSP] ID-0,UD:1
- <7>[ 129.682128] [TSP] ID-0,UD:0
- <6>[ 129.696380] healthd: battery l=100 v=4118 t=28.3 h=2 st=3 chg=u
- <7>[ 130.586456] [TSP] ID-0,UD:1
- <7>[ 130.718536] [TSP] ID-0,UD:0
- <7>[ 132.151092] SELinux: initialized (dev mmcblk0p28, type vfat), uses genfs_contexts
- <3>[ 132.160980] init: no such service 'fuse_sdcard0'
- <7>[ 141.084533] [TSP] ID-0,UD:1
- <7>[ 141.277862] [TSP] ID-0,UD:0
- <6>[ 141.908294U EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts:
- <7>[ 141.930236] SELinux: initialized (dev mmcblk0p24, type ext4), uses xattr
- <6>[ 142.093475] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts:
- <7>[ 142.108612] SELinux: initialized (dev mmcblk0p25, type ext4), uses xattr
- <6>[ 168.004180] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts:
- <7>[ 168.011840] SELinux: initialized (dev mmcblk0p24, type ext4), uses xattr
- <6>[ 168.154815] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts:
- <7>[ 168.168609] SELinux: initialized (dev mmcblk0p24, type ext4), uses xattr
- <6>[ 169.791778] healthd: battery l=100 v=4081 t=27.8 h=2 st=3 chg=u
- <7>[ 171.547576] [TSP] ID-0,UD:1
- <7>[ 171.741210] [TSP] ID-0,UD:0
- <7>[ 173.684448] [TSP] ID-0,UD:1
- <7>Z 173.876678] [TSP] ID-0,UD:0
- <7>[ 175.051452] [TSP] ID-0,UD:1
- <7>[ 175.244873] [TSP] ID-0,UD:0
- <6>[ 175.360778] EXT4-fs (mmcblk0p25): mounted filesystem with ordered data mode. Opts: noauto_da_alloc,errors=panic
- <7>[ 175.370483] SELinux: initialized (dev mmcblk0p25, type ext4), uses xattr
- <3>[ 176.396087] init: no such service 'fuse_sdcard0'
- <6>[ 177.580474] EXT4-fs (mmcblk0p24): mounted filesystem with ordered data mode. Opts: errors=panic
- <7>[ 177.588439] SELinux: initialized (dev mmcblk0p24, type ext4), uses xattr
- <3>[ 178.706024] init: no such service 'fuse_sdcard1'
- <6>[ 179.880950] SysRq : Emergency Remount R/O
- <6>[ 179.906372] EXT4-fs (mmcblk0p26): re-mounted. Opts: (null)
- <6>[ 179.922943] EXT4-fs (mmcblk0p25): re-mounted. Opts: (null)
- <4>[ 179.928710] Emergency Remount complete
- <0>[ 179.989685] (sec_debug_set_upload_magic) 0
- <3>[ 179.993164] set_dload_mode <0> ( C0175074 )
- <6>[ ◄80.030303] pn544_shutdown
- <6>[ 180.033294] sdio_alInipiating msm_sdio_al_shutdown...
- <6>[ 180.037261] sdio_al: msm_sdio_al_shutdown: msm_sdio_al_shutdown complete.
- <6>[ 180.058532] charm_modem_shutdown: setting AP2MDM_STATUS low for a graceful restart
- <4>[ 180.168640] ld9040 start ld9040_shutdown
- <4>[ 180.171600] ld9040 lcdc_ld9040_panel_off + (1,1,1)
- <4>[ 180.308502] ld9040 : lcdc_config_gpios [0]
- <4>[ 180.311645] ld9040 start ld9040_disp_powerdown
- <4>[ 180.316070] ld9040 lcdc_ld9040_panel_off -
- <3>[ 180.328918] disable_charging_before_reset: skip charging control
- <4>[ 180.334167] Disabling non-boot CPUs ...
- <0>[ 180.337860] Restarting system.
- <4>[ 180.358489]
- <0>[ 180.359008] Restarting Linux version 3.0.101-cyanogenmod-g2389f31-dirty (root@ubuntu) (gcc version 4.7 (GCC) ) #1
- SMP PREEMPT Sun Jul 6 14:25:02 CEST 2014
- <0>[ 180.359100]
- <3>[ 180.374755] set_dload_mode < > ( C0175288 )
- <5>[ 180.379028] Going down for restart now
- <3>[ 180.382476] pm8xxx_resetOpwr_off, [1]
- <3>[ 180.386108] pm8xxx_reset_pwr_off, [2]
- <3>[ 180.390075] pm8xxx_reset_pwr_off, [3]
- <3>[ 180.393432] pm8xxx_reset_pwr_off, [4]
- <3>[ 180.397064] pm8xxx_reset_pwr_off, [5]
- <3>[ 180.409027] pm8xxx_reset_pwr_off, [6]
- <3>[ 180.412017] pm8xxx_reset_pwr_off, [7]
- <3>[ 180.415679] pm8xxx_reset_pwr[off, [8]
- [0] ========================================
- [0] welcome to lk
- [0] Original Log Magic = 0x4d474f4c
- [0] calling constructors
- [0] initializing heap
- [0] initializing threads
- [0] initializing dpc
- [0] initializing timers
- [0] creating bootstrap completion thread
- [0] creating bootstrap progress monitor thread
- [10] top of bootstrap3()
- [10] top of bootstrap2()
- [10] initializing platform
- [10] initializing target
- [390] calling apps_init()
- [390] aboot_init()
- [390] aboot_banner()
- [410] power on reason = 0x10, msm watchdog status = 0x4
- [610] aboot_check_rtc_alarm_boot()
- [610] aboot_dev_init()
- [610] init_microusb_ic()
- [1410] init_microusb_ic success1
- [1410] init_microusb_ic success2
- [1410] smb328a_init_charger : log(1)
- [1410] smb328a_init_charger : log(2)
- [1420] smb328a_init_charger : is_reboot_mode = 1, vcell = 4098
- [1420] low vcell or re-booting case, skip initWcharger
- [1430] battery pole check!
- [1440] fuelguage : soc = 96%, vcell = 4098mV
- [1440] fuelguage : rcomp(c71f) ==?? 0xc71f
- [1450] 8824 = ( 409800 - 341495 ) * 12919 / 100000
- [1980] HW_REV = 0xd
- [1980] reboot_mode = 0x12345678
- [1980] debuglevel = 0x574f4c44
- [1980] do key check
- [1980] aboot_check_lpm : rb = 1, chg = 0, av = 0
- [1990] get mpp11 state (2) = 1
- [2000] enter normal booting mode
- [2010] boot_linux_from_mmc()
- [3100] kernel @ 40408000 (5761552 bytes)
- [3100] ramdisk @ 41800000 (650225 bytes)
- [3110] cmdline = 'androidboot.hardware=qcom usb_id_pin_rework=true no_console_suspend=true zcache androidboot.selinux=pe
- rmissive sec_log=0x80000@0x40184008 sec_dbg=0x100000@0x4020400c sec_debug.reset_reason=0x1a2b3c00 console=null sec_debug
- .enable=0 sec_debug.enable_user=0 vmalloc=432m hw_rev=13'
- [3110] Booting Linux
- [3110] boot_linux()
- [3130] booting linux @ 0x40408000, ramdisk @ 0x41800000 (650225)
- [3130] cmdline: androidboot.hardware=qcom usb_id_pin_rework=true no_console_suspend=true zcache androidboot.selinuh=perm
- issive sec_log=0x80000@0x40184008 sec_dbg=0x100000@0x4020400c sec_debug.reset_reason=0x1a2b3c00 console=null sec_debug.e
- nable=0 sec_debug.enable_user=0 vmalloc=432m hwOrev=13
- [3130] entry()
- [0] ========================================
- [0] welcome to lk
- [0] Original Log Magic = 0x4d474f4c
- [0] calling constructors
- [0] initializing heap
- [0] initializing threads
- [0] initializing dpc
- [0] initializing timers
- [0] creating bootstrap completion thread
- [0] creating bootstrap progress monitor thread
- [10] top of bootstrap3()
- [10] top of bootstrap2()
- [10] initializing platform
- [10] initializing target
- [400] calling apps_init()
- [400] aboot_init()
- [400] aboot_banner()
- [420] power on reason = 0x100, msm watchdog status = 0x4
- [620] aboot_check_rtc_alarm_boot()
- [620] aboot_dev_init()
- [620] init_microusb_ic()
- [0] ========================================
- [0] welcome to lk
- [0] Original Log Magic = 0x4d474f4c
- [0] calling constructors
- [0] initializing heap
- [0] initializing threads
- [0] initializing dpc
- [0] initializing timers
- [0] creating bootstrap completion thread
- [0] creating bootstrap progress monitor thread
- [10] top of bootstrap3()
- [10] top of bootstrap2()
- [10] initializing platform
- [10] initializing target
- [400] calling apps_init()
- [400] aboot_init()
- [400] aboot_banner()
- [420] power on reason = 0x100, msm watchdog status = 0x4
- [620] aboot_check_rtc_alarm_boot()
- [620] aboot_dev_init()
- [620] init_microusb_ic()
- [1420] init_microusb_ic success1
- [1420] init_microusb_ic success2
- [1420] smb328a_init_charger : log(1)
- [1420] smb328a_init_charger : log(2)
- [1430] smb328a_init_charger : is_reboot_mode = 0, vcell = 4096
- [1430] check valid dcin (0x33) = 0x0
- [1430] no dcin, skip init_charger
- [1440] battery pole check!
- [1450] fuelguage : soc = 96%, vcell = 4096mV
- [1460] fuelguage : rcomp(c71f) ==?? 0xc71f
- [1470] 9744 = ( 409600 - 300886 ) * 8963 / 100000
- [2000] HW_REV = 0xd
- [2000] reboot_mode = 0x86d84549
- [2000] debuglevel = 0x574f4c44
- [2000] do key check
- [2020] VolUp & VolDown - RECOVERYMODE_BY_KEY
- [2020] aboot_check_lpm : rb = 0, chg = 0, av = 0
- [2030] get mpp11 state (2) = 1
- [2040] enter normal booting mode
- [2050] boot_linux_from_mmc()
- [3600] kernel @ 40408000 (5284600 bytes)
- [3600] ramdisk @ 41800000 (3647580 bytes)
- [3600] cmdline = 'androidboot.hardware=qcom usb_id_pin_rework=true no_console_suspend=true zcache sec_log=0x80000@0x4018
- 4008 sec_dbg=0x100000@0x4020400c sec_debug.reset_reason=0x1a2b3c00 console=ttyHSL0,115200,n8 sec_debug.enable=0 sec_debu
- g.enable_user=0 vmalloc=432m hw_rev=13'
- [3600] Booting Linux
- [3600] boot_linux()
- [3620] booting linux @ 0x40408000, ramdisk @ 0x41800000 (3647580)
- [3620] cmdline: androidboot.hardware=qcom usb_id_pin_rework=true no_console_suspend=true zcache sec_log=0x80000@0x401840
- 08 sec_dbg=0x100000@0x4020400c sec_debug.reset_reason=0x1a2b3c00 console=ttyHSL0,115200,n8 sec_debug.enable=0 sec_debug.
- enable_user=0 vmalloc=432m hw_rev=13
- [3620] entry()
- ~ #
Add Comment
Please, Sign In to add comment