API tools faq
paste
Guest User

smartreport

a guest
Aug 24th, 2021
142
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.91 KB | None | 0 0
raw download clone embed print report
  1. smartctl 6.6 2017-11-05 r4594 [x86_64-linux-5.10.0-0.bpo.8-amd64] (local build)
  2. Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family: Seagate BarraCuda 3.5 (SMR)
  6. Device Model: ST2000DM005-2CW102
  7. Serial Number: ZFM2HZVP
  8. LU WWN Device Id: 5 000c50 0c951372d
  9. Firmware Version: 0001
  10. User Capacity: 2,000,398,934,016 bytes [2.00 TB]
  11. Sector Sizes: 512 bytes logical, 4096 bytes physical
  12. Rotation Rate: 5425 rpm
  13. Form Factor: 3.5 inches
  14. Device is: In smartctl database [for details use: -P show]
  15. ATA Version is: ACS-3 T13/2161-D revision 5
  16. SATA Version is: SATA 3.1, 6.0 Gb/s (current: 3.0 Gb/s)
  17. Local Time is: Tue Aug 24 23:46:09 2021 IST
  18. SMART support is: Available - device has SMART capability.
  19. SMART support is: Enabled
  20.  
  21. === START OF READ SMART DATA SECTION ===
  22. SMART overall-health self-assessment test result: PASSED
  23.  
  24. General SMART Values:
  25. Offline data collection status: (0x00) Offline data collection activity
  26. was never started.
  27. Auto Offline Data Collection: Disabled.
  28. Self-test execution status: ( 249) Self-test routine in progress...
  29. 90% of test remaining.
  30. Total time to complete Offline
  31. data collection: ( 0) seconds.
  32. Offline data collection
  33. capabilities: (0x73) SMART execute Offline immediate.
  34. Auto Offline data collection on/off support.
  35. Suspend Offline collection upon new
  36. command.
  37. No Offline surface scan supported.
  38. Self-test supported.
  39. Conveyance Self-test supported.
  40. Selective Self-test supported.
  41. SMART capabilities: (0x0003) Saves SMART data before entering
  42. power-saving mode.
  43. Supports SMART auto save timer.
  44. Error logging capability: (0x01) Error logging supported.
  45. General Purpose Logging supported.
  46. Short self-test routine
  47. recommended polling time: ( 1) minutes.
  48. Extended self-test routine
  49. recommended polling time: ( 244) minutes.
  50. Conveyance self-test routine
  51. recommended polling time: ( 2) minutes.
  52. SCT capabilities: (0x30a5) SCT Status supported.
  53. SCT Data Table supported.
  54.  
  55. SMART Attributes Data Structure revision number: 10
  56. Vendor Specific SMART Attributes with Thresholds:
  57. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  58. 1 Raw_Read_Error_Rate 0x000f 082 057 006 Pre-fail Always - 147334644
  59. 3 Spin_Up_Time 0x0003 099 098 000 Pre-fail Always - 0
  60. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 197
  61. 5 Reallocated_Sector_Ct 0x0033 100 099 010 Pre-fail Always - 1552
  62. 7 Seek_Error_Rate 0x000f 070 060 045 Pre-fail Always - 11039455
  63. 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 178 (148 200 0)
  64. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  65. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 189
  66. 183 Runtime_Bad_Block 0x0032 100 100 000 Old_age Always - 0
  67. 184 End-to-End_Error 0x0032 100 100 099 Old_age Always - 0
  68. 187 Reported_Uncorrect 0x0032 096 096 000 Old_age Always - 4
  69. 188 Command_Timeout 0x0032 100 098 000 Old_age Always - 2 2 2
  70. 189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0
  71. 190 Airflow_Temperature_Cel 0x0022 062 061 040 Old_age Always - 38 (Min/Max 38/39)
  72. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
  73. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 186
  74. 193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 206
  75. 194 Temperature_Celsius 0x0022 038 040 000 Old_age Always - 38 (0 29 0 0 0)
  76. 195 Hardware_ECC_Recovered 0x001a 082 064 000 Old_age Always - 147334644
  77. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 16
  78. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 16
  79. 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0
  80. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 166h+50m+25.132s
  81. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 2202446805
  82. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 1500798109
  83.  
  84. SMART Error Log Version: 1
  85. ATA Error Count: 4
  86. CR = Command Register [HEX]
  87. FR = Features Register [HEX]
  88. SC = Sector Count Register [HEX]
  89. SN = Sector Number Register [HEX]
  90. CL = Cylinder Low Register [HEX]
  91. CH = Cylinder High Register [HEX]
  92. DH = Device/Head Register [HEX]
  93. DC = Device Command Register [HEX]
  94. ER = Error register [HEX]
  95. ST = Status register [HEX]
  96. Powered_Up_Time is measured from power on, and printed as
  97. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  98. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  99.  
  100. Error 4 occurred at disk power-on lifetime: 1 hours (0 days + 1 hours)
  101. When the command that caused the error occurred, the device was active or idle.
  102.  
  103. After command completion occurred, registers were:
  104. ER ST SC SN CL CH DH
  105. -- -- -- -- -- -- --
  106. 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  107.  
  108. Commands leading to the command that caused the error were:
  109. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  110. -- -- -- -- -- -- -- -- ---------------- --------------------
  111. 25 00 08 ff ff ff ef 00 01:20:35.078 READ DMA EXT
  112. 27 00 00 00 00 00 e0 00 01:20:35.046 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  113. ec 00 00 00 00 00 a0 00 01:20:35.043 IDENTIFY DEVICE
  114. ef 03 46 00 00 00 a0 00 01:20:35.021 SET FEATURES [Set transfer mode]
  115. 27 00 00 00 00 00 e0 00 01:20:34.978 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  116.  
  117. Error 3 occurred at disk power-on lifetime: 1 hours (0 days + 1 hours)
  118. When the command that caused the error occurred, the device was active or idle.
  119.  
  120. After command completion occurred, registers were:
  121. ER ST SC SN CL CH DH
  122. -- -- -- -- -- -- --
  123. 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  124.  
  125. Commands leading to the command that caused the error were:
  126. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  127. -- -- -- -- -- -- -- -- ---------------- --------------------
  128. 25 00 07 ff ff ff ef 00 01:20:29.442 READ DMA EXT
  129. 27 00 00 00 00 00 e0 00 01:20:29.409 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  130. ec 00 00 00 00 00 a0 00 01:20:29.407 IDENTIFY DEVICE
  131. ef 03 46 00 00 00 a0 00 01:20:29.384 SET FEATURES [Set transfer mode]
  132. 27 00 00 00 00 00 e0 00 01:20:29.341 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  133.  
  134. Error 2 occurred at disk power-on lifetime: 1 hours (0 days + 1 hours)
  135. When the command that caused the error occurred, the device was active or idle.
  136.  
  137. After command completion occurred, registers were:
  138. ER ST SC SN CL CH DH
  139. -- -- -- -- -- -- --
  140. 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  141.  
  142. Commands leading to the command that caused the error were:
  143. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  144. -- -- -- -- -- -- -- -- ---------------- --------------------
  145. 25 00 01 ff ff ff ef 00 01:20:23.353 READ DMA EXT
  146. 27 00 00 00 00 00 e0 00 01:20:23.321 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  147. ec 00 00 00 00 00 a0 00 01:20:23.318 IDENTIFY DEVICE
  148. ef 03 46 00 00 00 a0 00 01:20:23.297 SET FEATURES [Set transfer mode]
  149. 27 00 00 00 00 00 e0 00 01:20:23.265 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  150.  
  151. Error 1 occurred at disk power-on lifetime: 1 hours (0 days + 1 hours)
  152. When the command that caused the error occurred, the device was active or idle.
  153.  
  154. After command completion occurred, registers were:
  155. ER ST SC SN CL CH DH
  156. -- -- -- -- -- -- --
  157. 40 53 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  158.  
  159. Commands leading to the command that caused the error were:
  160. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  161. -- -- -- -- -- -- -- -- ---------------- --------------------
  162. 25 00 20 ff ff ff ef 00 01:20:17.886 READ DMA EXT
  163. 25 00 08 ff ff ff ef 00 01:20:17.885 READ DMA EXT
  164. 25 00 20 ff ff ff ef 00 01:20:17.885 READ DMA EXT
  165. 25 00 08 ff ff ff ef 00 01:20:17.884 READ DMA EXT
  166. 25 00 20 ff ff ff ef 00 01:20:17.858 READ DMA EXT
  167.  
  168. SMART Self-test log structure revision number 1
  169. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  170. # 1 Short offline Self-test routine in progress 90% 178 -
  171.  
  172. SMART Selective self-test log data structure revision number 1
  173. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  174. 1 0 0 Not_testing
  175. 2 0 0 Not_testing
  176. 3 0 0 Not_testing
  177. 4 0 0 Not_testing
  178. 5 0 0 Not_testing
  179. Selective self-test flags (0x0):
  180. After scanning selected spans, do NOT read-scan remainder of disk.
  181. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!