Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- => bootm 1000000 - 1c00000
- WARNING: adjusting available memory to 30000000
- ## Booting kernel from Legacy Image at 01000000 ...
- Image Name: Linux-4.5.0-rc2
- Created: 2016-02-03 4:28:57 UTC
- Image Type: PowerPC Linux Kernel Image (gzip compressed)
- Data Size: 9346281 Bytes = 8.9 MiB
- Load Address: 00000000
- Entry Point: 00000000
- Verifying Checksum ... OK
- ## Flattened Device Tree blob at 01c00000
- Booting using the fdt blob at 0x1c00000
- Uncompressing Kernel Image ... OK
- Loading Device Tree to 03fe5000, end 03fff577 ... OK
- iommu: Adding device 0000:01:00.1 to group 26
- pci 0000:00:00.0: PCI bridge to [bus 01-ff]
- fsl-pci ffe201000.pcie: PCI host bridge to bus 0001:00
- pci_bus 0001:00: root bus resource [io 0x21000-0x30fff] (bus address [0x0000-0xffff])
- pci_bus 0001:00: root bus resource [mem 0xc20000000-0xc3fffffff] (bus address [0xe0000000-0xffffffff])
- pci_bus 0001:00: root bus resource [bus 00-08]
- iommu: Removing device ffe201000.pcie from group 27
- iommu: Adding device 0001:00:00.0 to group 27
- iommu: Adding device 0001:01:00.0 to group 27
- pci 0001:00:00.0: PCI bridge to [bus 01-ff]
- iommu: Adding device 0001:02:01.0 to group 27
- iommu: Adding device 0001:02:02.0 to group 27
- iommu: Adding device 0001:02:03.0 to group 27
- iommu: Adding device 0001:02:08.0 to group 27
- iommu: Adding device 0001:02:10.0 to group 27
- pci 0001:01:00.0: PCI bridge to [bus 02-ff]
- iommu: Adding device 0001:03:00.0 to group 27
- pci 0001:02:01.0: PCI bridge to [bus 03-ff]
- pci 0001:03:00.0: PCI bridge to [bus 04-ff]
- pci 0001:02:02.0: PCI bridge to [bus 05-ff]
- iommu: Adding device 0001:06:00.0 to group 27
- pci 0001:06:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
- pci 0001:02:03.0: PCI bridge to [bus 06-ff]
- pci 0001:02:08.0: PCI bridge to [bus 07-ff]
- pci 0001:02:10.0: PCI bridge to [bus 08-ff]
- PCI: Cannot allocate resource region 0 of device 0000:00:00.0, will remap
- PCI: Cannot allocate resource region 0 of device 0001:00:00.0, will remap
- pci 0000:00:00.0: BAR 0: no space for [mem size 0x01000000]
- pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x01000000]
- pci 0000:00:00.0: PCI bridge to [bus 01]
- pci 0000:00:00.0: bridge window [io 0x10000-0x1ffff]
- pci 0000:00:00.0: bridge window [mem 0xc00000000-0xc1fffffff]
- pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc
- pci 0001:00:00.0: BAR 0: no space for [mem size 0x01000000]
- pci 0001:00:00.0: BAR 0: failed to assign [mem size 0x01000000]
- pci 0001:03:00.0: PCI bridge to [bus 04]
- pci 0001:02:01.0: PCI bridge to [bus 03-04]
- pci 0001:02:02.0: PCI bridge to [bus 05]
- pci 0001:02:03.0: PCI bridge to [bus 06]
- pci 0001:02:03.0: bridge window [mem 0xc20000000-0xc200fffff]
- pci 0001:02:08.0: PCI bridge to [bus 07]
- pci 0001:02:10.0: PCI bridge to [bus 08]
- pci 0001:01:00.0: PCI bridge to [bus 02-08]
- pci 0001:01:00.0: bridge window [mem 0xc20000000-0xc200fffff]
- pci 0001:00:00.0: PCI bridge to [bus 01-08]
- pci 0001:00:00.0: bridge window [io 0x21000-0x30fff]
- pci 0001:00:00.0: bridge window [mem 0xc20000000-0xc3fffffff]
- pci_bus 0001:00: Some PCI device resources are unassigned, try booting with pci=realloc
- Setting up RapidIO peer-to-peer network /rapidio@ffe0c0000
- fsl-of-rio ffe0c0000.rapidio: Of-device full name /rapidio@ffe0c0000
- fsl-of-rio ffe0c0000.rapidio: Regs: [mem 0xffe0c0000-0xffe0d0fff]
- fsl-of-rio ffe0c0000.rapidio: No valid fsl,srio-rmu-handle property
- HugeTLB registered 4 MB page size, pre-allocated 0 pages
- HugeTLB registered 16 MB page size, pre-allocated 0 pages
- HugeTLB registered 64 MB page size, pre-allocated 0 pages
- HugeTLB registered 256 MB page size, pre-allocated 0 pages
- HugeTLB registered 1 GB page size, pre-allocated 0 pages
- raid6: int64x1 gen() 854 MB/s
- raid6: int64x1 xor() 821 MB/s
- raid6: int64x2 gen() 1219 MB/s
- raid6: int64x2 xor() 1013 MB/s
- raid6: int64x4 gen() 1609 MB/s
- raid6: int64x4 xor() 1138 MB/s
- raid6: int64x8 gen() 1186 MB/s
- raid6: int64x8 xor() 880 MB/s
- raid6: using algorithm int64x4 gen() 1609 MB/s
- raid6: .... xor() 1138 MB/s, rmw enabled
- raid6: using intx1 recovery algorithm
- Freescale Elo series DMA driver
- fsl-elo-dma ffe100300.dma: #0 (fsl,eloplus-dma-channel), irq 28
- fsl-elo-dma ffe100300.dma: #1 (fsl,eloplus-dma-channel), irq 29
- fsl-elo-dma ffe100300.dma: #2 (fsl,eloplus-dma-channel), irq 30
- fsl-elo-dma ffe100300.dma: #3 (fsl,eloplus-dma-channel), irq 31
- fsl-elo-dma ffe101300.dma: #0 (fsl,eloplus-dma-channel), irq 32
- fsl-elo-dma ffe101300.dma: #1 (fsl,eloplus-dma-channel), irq 33
- fsl-elo-dma ffe101300.dma: #2 (fsl,eloplus-dma-channel), irq 34
- fsl-elo-dma ffe101300.dma: #3 (fsl,eloplus-dma-channel), irq 35
- vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
- vgaarb: loaded
- vgaarb: bridge control possible 0000:01:00.0
- SCSI subsystem initialized
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- pps_core: LinuxPPS API ver. 1 registered
- pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
- PTP clock support registered
- EDAC MC: Ver: 3.0.0
- Advanced Linux Sound Architecture Driver Initialized.
- clocksource: Switched to clocksource timebase
- NET: Registered protocol family 2
- TCP established hash table entries: 65536 (order: 7, 524288 bytes)
- TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- TCP: Hash tables configured (established 65536 bind 65536)
- UDP hash table entries: 4096 (order: 5, 131072 bytes)
- UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
- NET: Registered protocol family 1
- RPC: Registered named UNIX socket transport module.
- RPC: Registered udp transport module.
- RPC: Registered tcp transport module.
- RPC: Registered tcp NFSv4.1 backchannel transport module.
- futex hash table entries: 512 (order: 3, 32768 bytes)
- squashfs: version 4.0 (2009/01/31) Phillip Lougher
- NFS: Registering the id_resolver key type
- Key type id_resolver registered
- Key type id_legacy registered
- ntfs: driver 2.1.32 [Flags: R/O].
- jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
- fuse init (API version 7.24)
- Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
- io scheduler noop registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- console [ttyS0] disabled
- serial8250.0: ttyS0 at MMIO 0xffe11c500 (irq = 36, base_baud = 24937500) is a 16550A
- console [ttyS0] enabled
- serial8250.0: ttyS1 at MMIO 0xffe11c600 (irq = 36, base_baud = 24937500) is a 16550A
- serial8250.0: ttyS2 at MMIO 0xffe11d500 (irq = 37, base_baud = 24937500) is a 16550A
- serial8250.0: ttyS3 at MMIO 0xffe11d600 (irq = 37, base_baud = 24937500) is a 16550A
- ePAPR hypervisor byte channel driver
- [drm] Initialized drm 1.1.0 20060810
- [drm] radeon kernel modesetting enabled.
- [drm] initializing kernel modesetting (CAICOS 0x1002:0x6779 0x1043:0x03DC).
- [drm] register mmio base: 0x10000000
- [drm] register mmio size: 131072
- ATOM BIOS: 6779.13.12.0.0.AS03
- [drm] GPU not posted. posting now...
- radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
- radeon 0000:01:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
- [drm] Detected VRAM RAM=512M, BAR=256M
- [drm] RAM width 32bits DDR
- [TTM] Zone kernel: Available graphics memory: 4085938 kiB
- [TTM] Zone dma32: Available graphics memory: 2097152 kiB
- [TTM] Initializing pool allocator
- [TTM] Initializing DMA pool allocator
- [drm] radeon: 512M of VRAM memory ready
- [drm] radeon: 1024M of GTT memory ready.
- [drm] Loading CAICOS Microcode
- [drm] Internal thermal controller without fan control
- [drm] radeon: dpm initialized
- [drm] GART: num cpu pages 262144, num gpu pages 262144
- [drm] enabling PCIE gen 2 link speeds, disable with radeon.pcie_gen2=0
- [drm] PCIE GART of 1024M enabled (table at 0x0000000000274000).
- radeon 0000:01:00.0: WB enabled
- radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xc0000001f7256c00
- radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xc0000001f7256c0c
- radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x0000000000072118 and cpu addr 0x8000080080132118
- [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [drm] Driver supports precise vblank timestamp query.
- radeon 0000:01:00.0: radeon: MSI limited to 32-bit
- radeon 0000:01:00.0: radeon: using MSI.
- [drm] radeon: irq initialized.
- random: nonblocking pool is initialized
- irq 482: nobody cared (try booting with the "irqpoll" option)
- CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.5.0-rc2 #3
- Call Trace:
- [c0000001fffcf850] [c000000000d06438] .dump_stack+0x88/0xb4 (unreliable)
- [c0000001fffcf8d0] [c0000000000acb5c] .__report_bad_irq+0x4c/0x140
- [c0000001fffcf970] [c0000000000ad0c4] .note_interrupt+0x344/0x3a0
- [c0000001fffcfa20] [c0000000000a9110] .handle_irq_event_percpu+0x130/0x1e0
- [c0000001fffcfae0] [c0000000000a9218] .handle_irq_event+0x58/0xb0
- [c0000001fffcfb60] [c0000000000ad9b4] .handle_level_irq+0xd4/0x230
- [c0000001fffcfbe0] [c0000000000a8400] .generic_handle_irq+0x40/0x70
- [c0000001fffcfc50] [c000000000030d58] .fsl_error_int_handler+0x108/0x150
- [c0000001fffcfcf0] [c0000000000a90a8] .handle_irq_event_percpu+0xc8/0x1e0
- [c0000001fffcfdb0] [c0000000000a9218] .handle_irq_event+0x58/0xb0
- [c0000001fffcfe30] [c0000000000ade90] .handle_fasteoi_irq+0xe0/0x2c0
- [c0000001fffcfeb0] [c0000000000a8400] .generic_handle_irq+0x40/0x70
- [c0000001fffcff20] [c0000000000048bc] .__do_irq+0x5c/0xb0
- [c0000001fffcff90] [c000000000012e04] .call_do_irq+0x14/0x24
- [c0000001f70c1de0] [c000000000004994] .do_IRQ+0x84/0x130
- [c0000001f70c1e70] [c000000000000ba8] restore_check_irq_replay+0x2c/0x70
- --- interrupt: 501 at .arch_local_irq_restore.part.0+0x44/0x60
- LR = .arch_local_irq_restore.part.0+0x44/0x60
- [c0000001f70c2160] [c0000000000891a4] .vtime_common_account_irq_enter+0x34/0x70 (unreliable)
- [c0000001f70c21d0] [c0000000000599d0] .__do_softirq+0xd0/0x310
- [c0000001f70c22d0] [c000000000059e28] .irq_exit+0xb8/0xf0
- [c0000001f70c2340] [c00000000000e7b0] .timer_interrupt+0x90/0xd0
- [c0000001f70c23c0] [c000000000000bd0] restore_check_irq_replay+0x54/0x70
- --- interrupt: 901 at .arch_local_irq_restore.part.0+0x44/0x60
- LR = .arch_local_irq_restore.part.0+0x44/0x60
- [c0000001f70c26b0] [0000000000000002] 0x2 (unreliable)
- [c0000001f70c2720] [c000000000100de0] .get_page_from_freelist+0x350/0xbb0
- [c0000001f70c2860] [c000000000101998] .__alloc_pages_nodemask+0x188/0xb40
- [c0000001f70c2a20] [c000000000150bec] .new_slab+0x3bc/0x4d0
- [c0000001f70c2ae0] [c000000000153568] .___slab_alloc.constprop.27+0x2e8/0x370
- [c0000001f70c2c10] [c000000000153b4c] .kmem_cache_alloc+0x12c/0x1a0
- [c0000001f70c2cb0] [c0000000001115f0] .shmem_alloc_inode+0x20/0x40
- [c0000001f70c2d20] [c00000000017facc] .alloc_inode+0x3c/0x110
- [c0000001f70c2da0] [c0000000001823d4] .new_inode_pseudo+0x14/0x80
- [c0000001f70c2e20] [c000000000182460] .new_inode+0x20/0x50
- [c0000001f70c2ea0] [c000000000111ed0] .shmem_get_inode+0x50/0x2d0
- [c0000001f70c2f60] [c000000000112d2c] .__shmem_file_setup+0xdc/0x300
- [c0000001f70c3030] [c00000000058d144] .drm_gem_object_init+0x34/0x90
- [c0000001f70c30b0] [c0000000005e946c] .radeon_bo_create+0xdc/0x260
- [c0000001f70c31b0] [c0000000006061b4] .radeon_ring_init+0x1a4/0x3a0
- [c0000001f70c3260] [c00000000065a05c] .evergreen_startup+0x146c/0x2b30
- [c0000001f70c3300] [c00000000065ba6c] .evergreen_init+0x24c/0x440
- [c0000001f70c3380] [c0000000005c5d78] .radeon_device_init+0x578/0xc40
- [c0000001f70c3420] [c0000000005c8dd8] .radeon_driver_load_kms+0xa8/0x1f0
- [c0000001f70c34b0] [c000000000593d80] .drm_dev_register+0xf0/0x110
- [c0000001f70c3540] [c000000000596220] .drm_get_pci_dev+0xe0/0x230
- [c0000001f70c35e0] [c0000000005c3f68] .radeon_pci_probe+0xa8/0x100
- [c0000001f70c3670] [c0000000004d5824] .pci_device_probe+0xe4/0x190
- [c0000001f70c3710] [c0000000007ed754] .really_probe+0x1b4/0x340
- [c0000001f70c37b0] [c0000000007ed9e8] .__driver_attach+0x108/0x110
- [c0000001f70c3840] [c0000000007eaa58] .bus_for_each_dev+0x88/0xf0
- [c0000001f70c38e0] [c0000000007ecea4] .driver_attach+0x24/0x40
- [c0000001f70c3950] [c0000000007ec8b8] .bus_add_driver+0x278/0x300
- [c0000001f70c39f0] [c0000000007ee30c] .driver_register+0x8c/0x170
- [c0000001f70c3a70] [c0000000004d4cd4] .__pci_register_driver+0x44/0x60
- [c0000001f70c3ae0] [c0000000005967d0] .drm_pci_init+0x150/0x190
- [c0000001f70c3b80] [c000000001442ee4] .radeon_init+0xec/0x11c
- [c0000001f70c3c00] [c000000000001124] .do_one_initcall+0xc4/0x250
- [c0000001f70c3cf0] [c00000000141af4c] .kernel_init_freeable+0x244/0x32c
- [c0000001f70c3db0] [c000000000001a1c] .kernel_init+0x1c/0x600
- [c0000001f70c3e30] [c000000000000898] .ret_from_kernel_thread+0x58/0xc0
- handlers:
- [<c000000001597e00>] .aer_irq
- Disabling IRQ #482
- [drm:.r600_ring_test] *ERROR* radeon: ring 0 test failed (scratch(0x8504)=0xCAFEDEAD)
- radeon 0000:01:00.0: disabling GPU acceleration
- [drm] Radeon Display Connectors
- [drm] Connector 0:
- [drm] HDMI-A-1
- [drm] HPD1
- [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c
- [drm] Encoders:
- [drm] DFP1: INTERNAL_UNIPHY1
- [drm] Connector 1:
- [drm] DVI-D-1
- [drm] HPD4
- [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c
- [drm] Encoders:
- [drm] DFP2: INTERNAL_UNIPHY
- [drm] Connector 2:
- [drm] VGA-1
- [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
- [drm] Encoders:
- [drm] CRT1: INTERNAL_KLDSCP_DAC1
- [drm] fb mappable at 0xC00475000
- [drm] vram apper at 0xC00000000
- [drm] size 8294400
- [drm] fb depth is 24
- [drm] pitch is 7680
- Console: switching to colour frame buffer device 240x67
- radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
- [drm] Initialized radeon 2.43.0 20080528 for 0000:01:00.0 on minor 0
- [drm] amdgpu kernel modesetting enabled.
- brd: module loaded
- loop: module loaded
- Loading iSCSI transport class v2.0-870.
- iscsi: registered transport (tcp)
- fsl-sata ffe220000.sata: Sata FSL Platform/CSB Driver init
- scsi host0: sata_fsl
- ata1: SATA max UDMA/133 irq 68
- fsl-sata ffe221000.sata: Sata FSL Platform/CSB Driver init
- ata1: Signature Update detected @ 0 msecs
- scsi host1: sata_fsl
- ata2: SATA max UDMA/133 irq 69
- fsl_espi ffe110000.spi: at 0x8000080080072000 (irq = 53)
- libphy: Fixed MDIO Bus: probed
- tg3.c:v3.137 (May 11, 2014)
- tg3 0001:06:00.0 eth0: Tigon3 [partno(BCM95721A211F_I) rev 4101] (PCI Express) MAC address 00:10:18:16:f5:88
- tg3 0001:06:00.0 eth0: attached PHY is 5750 (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[0])
- tg3 0001:06:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
- tg3 0001:06:00.0 eth0: dma_rwctrl[36180000] dma_mask[64-bit]
- libphy: Freescale PowerQUICC MII Bus: probed
- libphy: Freescale XGMAC MDIO Bus: probed
- fsl-fman ffe400000.fman: read_dts_node: Failed to get FM0 clock structure
- fsl-fman: probe of ffe400000.fman failed with error -5
- e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
- e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- usbcore: registered new interface driver lan78xx
- VFIO - User Level meta-driver version: 0.3
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ehci-pci: EHCI PCI platform driver
- ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- ohci-pci: OHCI PCI platform driver
- ehci-fsl: Freescale EHCI Host controller driver
- fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
- fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
- fsl-ehci fsl-ehci.0: irq 44, io mem 0xffe210000
- ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
- ata1.00: ATAPI: HL-DT-ST DVDRAM GH24NSB0, LN01, max UDMA/133
- fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
- ata1.00: configured for UDMA/133
- scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GH24NSB0 LN01 PQ: 0 ANSI: 5
- sr 0:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
- cdrom: Uniform CD-ROM driver Revision: 3.20
- sr 0:0:0:0: Attached scsi generic sg0 type 5
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 1 port detected
- fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
- fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
- fsl-ehci fsl-ehci.1: irq 45, io mem 0xffe211000
- fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
- hub 2-0:1.0: USB hub found
- hub 2-0:1.0: 1 port detected
- usbcore: registered new interface driver usb-storage
- i2c /dev entries driver
- mpc-i2c ffe118100.i2c: timeout 1000000 us
- mpc-i2c ffe119100.i2c: timeout 1000000 us
- rtc-ds1307 9-006f: rtc core: registered mcp7941x as rtc0
- rtc-ds1307 9-006f: 64 bytes nvram
- mpc-i2c ffe118000.i2c: timeout 1000000 us
- mpc-i2c ffe119000.i2c: timeout 1000000 us
- device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: [email protected]
- sdhci: Secure Digital Host Controller Interface driver
- sdhci: Copyright(c) Pierre Ossman
- sdhci-pltfm: SDHCI platform and OF driver helper
- /soc@ffe000000/sdhc@114000: voltage-ranges unspecified
- mmc0: SDHCI controller on ffe114000.sdhc [ffe114000.sdhc] using ADMA
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- Freescale hypervisor management driver
- fsl-hv: no hypervisor found
- snd_hda_intel 0000:01:00.1: Force to snoop mode by module option
- ipip: IPv4 over IPv4 tunneling driver
- ip_tables: (C) 2000-2006 Netfilter Core Team
- Initializing XFRM netlink socket
- NET: Registered protocol family 10
- sit: IPv6 over IPv4 tunneling driver
- NET: Registered protocol family 17
- NET: Registered protocol family 15
- Key type dns_resolver registered
- Btrfs loaded
- rtc-ds1307 9-006f: setting system clock to 2016-02-02 21:04:22 UTC (1454447062)
- input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/platform/ffe200000.pcie/pci0000:00/0000:00:00.0/0000:01:00.1/sound/card0/input0
- ALSA device list:
- #0: HDA ATI HDMI at 0xc10040000 irq 27
- mmc0: new high speed SDHC card at address 59b4
- mmcblk0: mmc0:59b4 USD 3.73 GiB
- usb 1-1: new high-speed USB device number 2 using fsl-ehci
- ata2: Signature Update detected @ 504 msecs
- usb 2-1: new high-speed USB device number 2 using fsl-ehci
- hub 1-1:1.0: USB hub found
- hub 1-1:1.0: 4 ports detected
- ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- ata2.00: ATA-8: SSD2SC120G726A104-475-277
Advertisement
Add Comment
Please, Sign In to add comment