Guest User

Untitled

a guest
Sep 7th, 2018
116
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Initializing cgroup subsys cpuset
  3. [ 0.000000] Initializing cgroup subsys cpu
  4. [ 0.000000] Initializing cgroup subsys cpuacct
  5. [ 0.000000] Initializing cgroup subsys schedtune
  6. [ 0.000000] Linux version 4.4.78-perf+ (guhl@myx301) (gcc version 4.9.x 20150123 (prerelease) (GCC) ) #9 SMP PREEMPT Fri Sep 7 13:50:54 UTC 2018
  7. [ 0.000000] Boot CPU: AArch64 Processor [51af8014]
  8. [ 0.000000] Machine: Qualcomm Technologies, Inc. MSM 8998 v2.1 MTP
  9. [ 0.000000] earlycon: Early serial console at MMIO 0xc1b0000 (options '')
  10. [ 0.000000] bootconsole [uart0] enabled
  11. [ 0.000000] Reserved memory: reserved region for node 'removed_regions@85800000': base 0x0000000085800000, size 55 MiB
  12. [ 0.000000] Reserved memory: reserved region for node 'pil_adsp_region@0x8b200000': base 0x000000008b200000, size 30 MiB
  13. [ 0.000000] Reserved memory: reserved region for node 'spss_region@8ab00000': base 0x000000008ab00000, size 7 MiB
  14. [ 0.000000] Reserved memory: reserved region for node 'splash_region@9d600000': base 0x000000009d400000, size 36 MiB
  15. [ 0.000000] Reserved memory: reserved region for node 'pil_ipa_gpu_region@95600000': base 0x0000000095600000, size 1 MiB
  16. [ 0.000000] Reserved memory: reserved region for node 'pil_slpi_region@94700000': base 0x0000000094700000, size 15 MiB
  17. [ 0.000000] Reserved memory: reserved region for node 'pil_mba_region@94500000': base 0x0000000094500000, size 2 MiB
  18. [ 0.000000] Reserved memory: reserved region for node 'pil_video_region@94000000': base 0x0000000094000000, size 5 MiB
  19. [ 0.000000] Reserved memory: reserved region for node 'modem_region@8d000000': base 0x000000008d000000, size 112 MiB
  20. [ 0.000000] Reserved memory: reserved region for node 'ramoops_region@b0000000': base 0x00000000b0000000, size 2 MiB
  21. [ 0.000000] Reserved memory: allocated memory for 'secure_region' node: base 0x00000000fa000000, size 92 MiB
  22. [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000fa000000, size 92 MiB
  23. [ 0.000000] Reserved memory: initialized node secure_region, compatible id shared-dma-pool
  24. [ 0.000000] Reserved memory: allocated memory for 'qseecom_region' node: base 0x00000000f8c00000, size 20 MiB
  25. [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f8c00000, size 20 MiB
  26. [ 0.000000] Reserved memory: initialized node qseecom_region, compatible id shared-dma-pool
  27. [ 0.000000] Reserved memory: allocated memory for 'linux,cma' node: base 0x00000000f6c00000, size 32 MiB
  28. [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f6c00000, size 32 MiB
  29. [ 0.000000] Reserved memory: initialized node linux,cma, compatible id shared-dma-pool
  30. [ 0.000000] Reserved memory: allocated memory for 'adsp_region' node: base 0x00000000f6400000, size 8 MiB
  31. [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f6400000, size 8 MiB
  32. [ 0.000000] Reserved memory: initialized node adsp_region, compatible id shared-dma-pool
  33. [ 0.000000] Reserved memory: allocated memory for 'sp_region' node: base 0x00000000f5c00000, size 8 MiB
  34. [ 0.000000] Reserved memory: created CMA memory pool at 0x00000000f5c00000, size 8 MiB
  35. [ 0.000000] Reserved memory: initialized node sp_region, compatible id shared-dma-pool
  36. [ 0.000000] Removed memory: created DMA memory pool at 0x0000000085800000, size 55 MiB
  37. [ 0.000000] Reserved memory: initialized node removed_regions@85800000, compatible id removed-dma-pool
  38. [ 0.000000] Removed memory: created DMA memory pool at 0x000000008ab00000, size 7 MiB
  39. [ 0.000000] Reserved memory: initialized node spss_region@8ab00000, compatible id removed-dma-pool
  40. [ 0.000000] Removed memory: created DMA memory pool at 0x000000008b200000, size 30 MiB
  41. [ 0.000000] Reserved memory: initialized node pil_adsp_region@0x8b200000, compatible id removed-dma-pool
  42. [ 0.000000] Removed memory: created DMA memory pool at 0x000000008d000000, size 112 MiB
  43. [ 0.000000] Reserved memory: initialized node modem_region@8d000000, compatible id removed-dma-pool
  44. [ 0.000000] Removed memory: created DMA memory pool at 0x0000000094000000, size 5 MiB
  45. [ 0.000000] Reserved memory: initialized node pil_video_region@94000000, compatible id removed-dma-pool
  46. [ 0.000000] Removed memory: created DMA memory pool at 0x0000000094500000, size 2 MiB
  47. [ 0.000000] Reserved memory: initialized node pil_mba_region@94500000, compatible id removed-dma-pool
  48. [ 0.000000] Removed memory: created DMA memory pool at 0x0000000094700000, size 15 MiB
  49. [ 0.000000] Reserved memory: initialized node pil_slpi_region@94700000, compatible id removed-dma-pool
  50. [ 0.000000] Removed memory: created DMA memory pool at 0x0000000095600000, size 1 MiB
  51. [ 0.000000] Reserved memory: initialized node pil_ipa_gpu_region@95600000, compatible id removed-dma-pool
  52. [ 0.000000] Removed memory: created DMA memory pool at 0x00000000b0000000, size 2 MiB
  53. [ 0.000000] Reserved memory: initialized node ramoops_region@b0000000, compatible id removed-dma-pool
  54. [ 0.000000] On node 0 totalpages: 1504192
  55. [ 0.000000] DMA zone: 11372 pages used for memmap
  56. [ 0.000000] DMA zone: 0 pages reserved
  57. [ 0.000000] DMA zone: 727808 pages, LIFO batch:31
  58. [ 0.000000] Normal zone: 12131 pages used for memmap
  59. [ 0.000000] Normal zone: 776384 pages, LIFO batch:31
  60. [ 0.000000] psci: probing for conduit method from DT.
  61. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  62. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  63. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  64. [ 0.000000] psci: Initializing psci_cpu_init
  65. [ 0.000000] psci: Initializing psci_cpu_init
  66. [ 0.000000] psci: Initializing psci_cpu_init
  67. [ 0.000000] psci: Initializing psci_cpu_init
  68. [ 0.000000] psci: Initializing psci_cpu_init
  69. [ 0.000000] psci: Initializing psci_cpu_init
  70. [ 0.000000] psci: Initializing psci_cpu_init
  71. [ 0.000000] PERCPU: Embedded 21 pages/cpu @fffffffbbd788000 s47552 r8192 d30272 u86016
  72. [ 0.000000] pcpu-alloc: s47552 r8192 d30272 u86016 alloc=21*4096
  73. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
  74. [ 0.000000] CPU features: enabling workaround for Kryo2xx Silver erratum 845719
  75. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1480689
  76. [ 0.000000] Kernel command line: rcupdate.rcu_expedited=1 androidboot.console=ttyMSM0 androidboot.hardware=qcom user_debug=31 msm_rtb.filter=0x37 ehci-hcd.park=3 service_locator.enable=1 swiotlb=2048 selinux=0 audit=0 console=ttyHS0,115200,n8 earlycon=msm_serial_dm,0xc1b0000 androidboot.configfs=true androidboot.veritymode=enforcing androidboot.verifiedbootstate=orange androidboot.keymaster=1 androidboot.bootdevice=1da4000.ufshc androidboot.ramdump=disable androidboot.secureboot=1 androidboot.dp=0x0 androidboot.wcnss=1 androidboot.serialno=c6013869 androidboot.hwversion=3.2.0 androidboot.product.region=cn androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_jdi_fhd_nt35596s_video:config2:1:none:cfg:single_dsi
  77. [ 0.000000] audit: disabled (until reboot)
  78. [ 0.000000] log_buf_len individual max cpu contribution: 131072 bytes
  79. [ 0.000000] log_buf_len total cpu_extra contributions: 917504 bytes
  80. [ 0.000000] log_buf_len min size: 131072 bytes
  81. [ 0.000000] log_buf_len: 1048576 bytes
  82. [ 0.000000] early log buf free: 123636(94%)
  83. [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  84. [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
  85. [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
  86. [ 0.000000] software IO TLB [mem 0xf5800000-0xf5c00000] (4MB) mapped at [fffffffaf5800000-fffffffaf5bfffff]
  87. [ 0.000000] Memory: 5652592K/6016768K available (17918K kernel code, 2244K rwdata, 8336K rodata, 8192K init, 4441K bss, 200336K reserved, 163840K cma-reserved)
  88. [ 0.000000] Virtual kernel memory layout:
  89. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
  90. [ 0.000000] HMP scheduling enabled.
  91. [ 0.000000] Preemptible hierarchical RCU implementation.
  92. [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
  93. [ 0.000000] NR_IRQS:64 nr_irqs:64 0
  94. [ 0.000000] mpm_init_irq_domain(): Cannot find irq controller for qcom,gpio-parent
  95. [ 0.000000] MPM 1 irq mapping errored -517
  96. [ 0.000000] Offload RCU callbacks from all CPUs
  97. [ 0.000000] Offload RCU callbacks from CPUs: 0-7.
  98. [ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
  99. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  100. [ 0.000003] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  101. [ 0.010759] clocksource: Switched to clocksource arch_sys_counter
  102. [ 0.020282] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=19200)
  103. [ 0.032794] pid_max: default: 32768 minimum: 301
  104. [ 0.035106] Security Framework initialized
  105. [ 0.039919] SELinux: Disabled at boot.
  106. [ 0.043844] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
  107. [ 0.047567] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
  108. [ 0.055016] Initializing cgroup subsys io
  109. [ 0.061714] Initializing cgroup subsys devices
  110. [ 0.065876] Initializing cgroup subsys freezer
  111. [ 0.070215] Initializing cgroup subsys net_cls
  112. [ 0.074646] Initializing cgroup subsys perf_event
  113. [ 0.079339] /cpus/cpu@0: Missing clock-frequency property
  114. [ 0.083861] /cpus/cpu@1: Missing clock-frequency property
  115. [ 0.089230] /cpus/cpu@2: Missing clock-frequency property
  116. [ 0.094614] /cpus/cpu@3: Missing clock-frequency property
  117. [ 0.099994] /cpus/cpu@100: Missing clock-frequency property
  118. [ 0.105377] /cpus/cpu@101: Missing clock-frequency property
  119. [ 0.110767] /cpus/cpu@102: Missing clock-frequency property
  120. [ 0.116315] /cpus/cpu@103: Missing clock-frequency property
  121. [ 0.121895] ASID allocator initialised with 65536 entries
  122. [ 0.127501] NOHZ: local_softirq_pending 02
  123. [ 0.140272] MSM Memory Dump base table set up
  124. [ 0.140311] MSM Memory Dump apps data table set up
  125. [ 0.177494] Brought up 8 CPUs
  126. [ 0.177515] SMP: Total of 8 processors activated.
  127. [ 0.179450] CPU features: detected feature: GIC system register CPU interface
  128. [ 0.184559] CPU: All CPU(s) started at EL1
  129. [ 0.191319] alternatives: patching kernel code
  130. [ 0.195384] CPU7: update max cpu_capacity 1024
  131. [ 0.195906] devtmpfs: initialized
  132. [ 0.208768] CPU0: update max cpu_capacity 1024
  133. [ 0.312367] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
  134. [ 0.312456] futex hash table entries: 2048 (order: 5, 131072 bytes)
  135. [ 0.335469] pinctrl core: initialized pinctrl subsystem
  136. [ 0.336918] NET: Registered protocol family 16
  137. [ 0.342210] schedtune: init normalization constants...
  138. [ 0.344048] schedtune: disabled!
  139. [ 0.350218] cpuidle: using governor menu
  140. [ 0.352633] cpuidle: using governor qcom
  141. [ 0.357962] vdso: 2 pages (1 code @ ffffff8688606000, 1 data @ ffffff8689804000)
  142. [ 0.361623] DMA: preallocated 256 KiB pool for atomic allocations
  143. [ 0.371626] exit: IPA_USB init success!
  144. [ 0.386712] spmi spmi-0: PMIC arbiter version v3 (0x30000000)
  145. [ 0.401821] sps:sps is ready.
  146. [ 0.412835] platform soc:qcom,msm-adsprpc-mem: assigned reserved memory node adsp_region
  147. [ 0.413565] msm_rpm_dev_probe: APSS-RPM communication over GLINK
  148. [ 0.434884] msm_rpm_trans_notify_state: glink config params: transport=(null), edge=rpm, name=rpm_requests
  149. [ 0.440881] platform 17300000.qcom,lpass: assigned reserved memory node pil_adsp_region@0x8b200000
  150. [ 0.444434] platform 4080000.qcom,mss: assigned reserved memory node modem_region@8d000000
  151. [ 0.456983] msm-thermal soc:qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
  152. [ 0.460763] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-dig probe
  153. [ 0.474103] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
  154. [ 0.481231] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
  155. [ 0.489522] platform 5c00000.qcom,ssc: assigned reserved memory node pil_slpi_region@94700000
  156. [ 0.503270] platform cce0000.qcom,venus: assigned reserved memory node pil_video_region@94000000
  157. [ 0.511594] msm_watchdog 17817000.qcom,wdt: wdog absent resource not present
  158. [ 0.520197] msm_watchdog 17817000.qcom,wdt: MSM Watchdog Initialized
  159. [ 0.527498] platform 1d0101c.qcom,spss: assigned reserved memory node spss_region@8ab00000
  160. [ 0.542183] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
  161. [ 0.571002] __of_mpm_init(): MPM driver mapping exists
  162. [ 0.581128] irq: no irq domain found for /soc/qcom,mdss_mdp@c900000 !
  163. [ 0.585991] i2c-msm-v2 c179000.i2c: probing driver i2c-msm-v2
  164. [ 0.586694] i2c-msm-v2 c179000.i2c: error on clk_get(core_clk):-517
  165. [ 0.592338] i2c-msm-v2 c179000.i2c: error probe() failed with err:-517
  166. [ 0.599315] i2c-msm-v2 c17a000.i2c: probing driver i2c-msm-v2
  167. [ 0.605113] i2c-msm-v2 c17a000.i2c: error on clk_get(core_clk):-517
  168. [ 0.610820] i2c-msm-v2 c17a000.i2c: error probe() failed with err:-517
  169. [ 0.617823] i2c-msm-v2 c1b5000.i2c: probing driver i2c-msm-v2
  170. [ 0.623596] i2c-msm-v2 c1b5000.i2c: error on clk_get(core_clk):-517
  171. [ 0.629307] i2c-msm-v2 c1b5000.i2c: error probe() failed with err:-517
  172. [ 0.636343] i2c-msm-v2 c1b8000.i2c: probing driver i2c-msm-v2
  173. [ 0.642090] i2c-msm-v2 c1b8000.i2c: error on clk_get(core_clk):-517
  174. [ 0.647798] i2c-msm-v2 c1b8000.i2c: error probe() failed with err:-517
  175. [ 0.661438] irq: no irq domain found for /soc/qcom,sde_kms@c900000 !
  176. [ 0.663444] irq: no irq domain found for /soc/qcom,hdmi_tx_8998@c9a0000 !
  177. [ 0.667549] platform soc:ramoops: assigned reserved memory node ramoops_region@b0000000
  178. [ 0.721242] console [pstore-1] enabled
  179. [ 0.721525] pstore: Registered ramoops as persistent store backend
  180. [ 0.723933] ramoops: attached 0x200000@0xb0000000, ecc: 0/0
  181. [ 0.745254] pm8998_l24: supplied by pm8998_l12
  182. [ 0.748213] msm-thermal soc:qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
  183. [ 0.748710] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
  184. [ 0.762141] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
  185. [ 0.769251] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
  186. [ 0.777859] msm_mpm_dev_probe(): Cannot get clk resource for XO: -517
  187. [ 0.791483] i2c-msm-v2 c179000.i2c: probing driver i2c-msm-v2
  188. [ 0.797134] i2c-msm-v2 c179000.i2c: error on clk_get(core_clk):-517
  189. [ 0.802736] i2c-msm-v2 c179000.i2c: error probe() failed with err:-517
  190. [ 0.809443] i2c-msm-v2 c17a000.i2c: probing driver i2c-msm-v2
  191. [ 0.815514] i2c-msm-v2 c17a000.i2c: error on clk_get(core_clk):-517
  192. [ 0.821218] i2c-msm-v2 c17a000.i2c: error probe() failed with err:-517
  193. [ 0.827981] i2c-msm-v2 c1b5000.i2c: probing driver i2c-msm-v2
  194. [ 0.833990] i2c-msm-v2 c1b5000.i2c: error on clk_get(core_clk):-517
  195. [ 0.839703] i2c-msm-v2 c1b5000.i2c: error probe() failed with err:-517
  196. [ 0.846465] i2c-msm-v2 c1b8000.i2c: probing driver i2c-msm-v2
  197. [ 0.852487] i2c-msm-v2 c1b8000.i2c: error on clk_get(core_clk):-517
  198. [ 0.858192] i2c-msm-v2 c1b8000.i2c: error probe() failed with err:-517
  199. [ 0.884142] qcom,gcc-8998 100000.qcom,gcc: Registered GCC clocks
  200. [ 0.911552] qcom,mmsscc-8998 c8c0000.qcom,mmsscc: Registered MMSS clocks.
  201. [ 0.921056] qcom,gpucc-8998 5065000.qcom,gpucc: Registered GPU clocks (barring gfx3d clocks)
  202. [ 0.926850] msm-thermal soc:qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
  203. [ 0.928893] msm_thermal:vdd_restriction_reg_init Defer regulator vdd-gfx probe
  204. [ 0.941900] msm_thermal:probe_vdd_rstr Err regulator init. err:-517. KTM continues.
  205. [ 0.949015] msm-thermal soc:qcom,msm-thermal: probe_vdd_rstr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,max-freq-level. err=-517. KTM continues
  206. [ 0.957187] cprh_kbss_read_fuse_data: apc0_pwrcl_corner: speed bin = 2
  207. [ 0.970503] cprh_msm8998_kbss_read_fuse_data: apc0_pwrcl_corner: CPR fusing revision = 3
  208. [ 0.976983] cprh_kbss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused LowSVS: open-loop= 598000 uV
  209. [ 0.985062] cprh_kbss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused SVS: open-loop= 646000 uV
  210. [ 0.994526] cprh_kbss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused NOM: open-loop= 758000 uV
  211. [ 1.004226] cprh_kbss_calculate_open_loop_voltages: apc0_pwrcl_corner: fused TURBO_L1: open-loop= 866000 uV
  212. [ 1.014124] cprh_kbss_calculate_target_quotients: apc0_pwrcl_corner: fused LowSVS: quot[11]= 554
  213. [ 1.023668] cprh_kbss_calculate_target_quotients: apc0_pwrcl_corner: fused SVS: quot[11]= 666, quot_offset[11]= 110
  214. [ 1.032701] cprh_kbss_calculate_target_quotients: apc0_pwrcl_corner: fused NOM: quot[11]= 964, quot_offset[11]= 295
  215. [ 1.043724] cprh_kbss_calculate_target_quotients: apc0_pwrcl_corner: fused TURBO_L1: quot[11]=1232, quot_offset[11]= 265
  216. [ 1.057020] cpr3_regulator_init_ctrl: apc0: Default CPR mode = full HW closed-loop
  217. [ 1.066507] cprh_kbss_read_fuse_data: apc1_perfcl_corner: speed bin = 2
  218. [ 1.072853] cprh_msm8998_kbss_read_fuse_data: apc1_perfcl_corner: CPR fusing revision = 3
  219. [ 1.079510] cprh_kbss_calculate_open_loop_voltages: apc1_perfcl_corner: fused LowSVS: open-loop= 626000 uV
  220. [ 1.087648] cprh_kbss_calculate_open_loop_voltages: apc1_perfcl_corner: fused SVS: open-loop= 626000 uV
  221. [ 1.097540] cprh_kbss_calculate_open_loop_voltages: apc1_perfcl_corner: fused NOM: open-loop= 758000 uV
  222. [ 1.107346] cprh_kbss_calculate_open_loop_voltages: apc1_perfcl_corner: fused TURBO_L1: open-loop= 956000 uV
  223. [ 1.117181] cprh_kbss_calculate_open_loop_voltages: apc1_perfcl_corner: fuse corner 1 voltage=626000 uV < fuse corner 0 voltage=634000 uV; overriding: fuse corner 1 voltage=634000
  224. [ 1.127191] cprh_kbss_calculate_target_quotients: apc1_perfcl_corner: fused LowSVS: quot[11]=1034
  225. [ 1.142681] cprh_kbss_calculate_target_quotients: apc1_perfcl_corner: fused SVS: quot[11]=1034, quot_offset[11]= 0
  226. [ 1.151710] cprh_kbss_calculate_target_quotients: apc1_perfcl_corner: fused NOM: quot[11]=1408, quot_offset[11]= 370
  227. [ 1.162822] cprh_kbss_calculate_target_quotients: apc1_perfcl_corner: fused TURBO_L1: quot[11]=1858, quot_offset[11]= 445
  228. [ 1.176946] cpr3_regulator_init_ctrl: apc1: Default CPR mode = full HW closed-loop
  229. [ 1.185940] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR fusing revision = 2
  230. [ 1.192215] cpr3_msm8996_mmss_read_fuse_data: gfx_corner: CPR limitation = none
  231. [ 1.200389] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[0] open-loop= 586000 uV
  232. [ 1.206832] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[1] open-loop= 668000 uV
  233. [ 1.216548] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[2] open-loop= 802000 uV
  234. [ 1.226270] cpr3_msm8996_mmss_calculate_open_loop_voltages: gfx_corner: fuse_corner[3] open-loop= 964000 uV
  235. [ 1.236265] cpr3_regulator_init_ctrl: gfx: Default CPR mode = closed-loop
  236. [ 1.247870] i2c-msm-v2 c179000.i2c: probing driver i2c-msm-v2
  237. [ 1.252810] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  238. [ 1.258393] i2c-msm-v2 c179000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
  239. [ 1.268499] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  240. [ 1.277279] i2c-msm-v2 c17a000.i2c: probing driver i2c-msm-v2
  241. [ 1.285755] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  242. [ 1.291391] i2c-msm-v2 c17a000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
  243. [ 1.301394] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  244. [ 1.310134] i2c-msm-v2 c1b5000.i2c: probing driver i2c-msm-v2
  245. [ 1.318741] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  246. [ 1.324376] i2c-msm-v2 c1b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
  247. [ 1.334393] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  248. [ 1.343148] i2c-msm-v2 c1b8000.i2c: probing driver i2c-msm-v2
  249. [ 1.351725] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  250. [ 1.357360] i2c-msm-v2 c1b8000.i2c: msm_bus_scale_register_client(mstr-id:84):0 (not a problem)
  251. [ 1.367408] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
  252. [ 1.376640] gfx3d_clk_src: set OPP pair(180000000 Hz: 648000 uV) on 5000000.qcom,kgsl-3d0
  253. [ 1.385142] gfx3d_clk_src: set OPP pair(710000000 Hz: 964000 uV) on 5000000.qcom,kgsl-3d0
  254. [ 1.402258] qcom,gfxcc-8998 5065000.qcom,gfxcc: Completed registering all GPU clocks
  255. [ 1.405960] cpu-clock-osm 179c0000.qcom,cpu-clock-8998: using pwrcl speed bin 0 and pvs_ver 0
  256. [ 1.409153] cpu-clock-osm 179c0000.qcom,cpu-clock-8998: using perfcl speed bin 2 and pvs_ver 0
  257. [ 1.427929] add_opp: Set OPP pair (300000000 Hz, 640000 uv) on cpu0
  258. [ 1.428521] add_opp: Set OPP pair (1900800000 Hz, 868000 uv) on cpu0
  259. [ 1.433045] add_opp: Set OPP pair (300000000 Hz, 640000 uv) on cpu1
  260. [ 1.439978] add_opp: Set OPP pair (1900800000 Hz, 868000 uv) on cpu1
  261. [ 1.445624] add_opp: Set OPP pair (300000000 Hz, 640000 uv) on cpu2
  262. [ 1.452536] add_opp: Set OPP pair (1900800000 Hz, 868000 uv) on cpu2
  263. [ 1.458209] add_opp: Set OPP pair (300000000 Hz, 640000 uv) on cpu3
  264. [ 1.465132] add_opp: Set OPP pair (1900800000 Hz, 868000 uv) on cpu3
  265. [ 1.470805] add_opp: Set OPP pair (300000000 Hz, 636000 uv) on cpu4
  266. [ 1.477869] add_opp: Set OPP pair (2457600000 Hz, 980000 uv) on cpu4
  267. [ 1.483383] add_opp: Set OPP pair (300000000 Hz, 636000 uv) on cpu5
  268. [ 1.490431] add_opp: Set OPP pair (2457600000 Hz, 980000 uv) on cpu5
  269. [ 1.495969] add_opp: Set OPP pair (300000000 Hz, 636000 uv) on cpu6
  270. [ 1.503032] add_opp: Set OPP pair (2457600000 Hz, 980000 uv) on cpu6
  271. [ 1.508561] add_opp: Set OPP pair (300000000 Hz, 636000 uv) on cpu7
  272. [ 1.515595] add_opp: Set OPP pair (2457600000 Hz, 980000 uv) on cpu7
  273. [ 1.521358] cpu_clock_osm_driver_probe: OSM driver inited
  274. [ 1.527954] msm-thermal soc:qcom,msm-thermal: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
  275. [ 1.533124] msm-thermal soc:qcom,msm-thermal: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-opt-curr-temp err:-22. KTM continues
  276. [ 1.546411] msm-thermal soc:qcom,msm-thermal: probe_vdd_mx:Failed reading node=/soc/qcom,msm-thermal, key=qcom,mx-restriction-temp. KTM continues
  277. [ 1.559793] msm-thermal soc:qcom,msm-thermal: probe_freq_mitigation:Failed reading node=/soc/qcom,msm-thermal, key=qcom,limit-temp. err=-22. KTM continues
  278. [ 1.572801] msm-thermal soc:qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,rpm-phase-resource-type err=-22. KTM continues
  279. [ 1.586515] msm-thermal soc:qcom,msm-thermal: msm_thermal:Failed reading node=/soc/qcom,msm-thermal, key=qcom,gfx-sensor-id. err=-22. KTM continues
  280. [ 1.606503] qcom,qpnp-pin 800f000.qcom,spmi:qcom,pm8005@4:gpios: qpnp_pin_probe: no device nodes specified in topology
  281. [ 1.613596] qcom,qpnp-pin: probe of 800f000.qcom,spmi:qcom,pm8005@4:gpios failed with error -22
  282. [ 1.625055] ACPI: Interpreter disabled.
  283. [ 1.633185] KPI: Bootloader start count = 108456
  284. [ 1.636745] KPI: Bootloader end count = 865196
  285. [ 1.641603] KPI: Bootloader display count = 4227267701
  286. [ 1.645858] KPI: Bootloader load kernel count = 1820
  287. [ 1.650982] KPI: Kernel MPM timestamp = 952608
  288. [ 1.656098] KPI: Kernel MPM Clock frequency = 32768
  289. [ 1.660360] socinfo_print: v0.11, id=292, ver=2.1, raw_id=94, raw_ver=2, hw_plat=32, hw_plat_ver=131072
  290. [ 1.665185] msm_bus_fabric_init_driver
  291. [ 1.697438] msm_bus_dev_init_qos: Skipping QOS init for 1
  292. [ 1.697481] msm-bus-type fab-mnoc: Error: Failed to get regulator clk-camss-ahb-no-rate:-517
  293. [ 1.701837] msm-bus-type fab-mnoc: Error: Failed to get regulator clk-camss-ahb-no-rate:-517
  294. [ 1.710347] fab-mnoc supply clk-mdss-ahb-no-rate not found, using dummy regulator
  295. [ 1.718778] fab-mnoc supply clk-mdss-axi-no-rate not found, using dummy regulator
  296. [ 1.726160] msm-bus-type fab-mnoc: Error: Failed to get regulator clk-camss-ahb-no-rate:-517
  297. [ 1.733609] msm-bus-type fab-mnoc: Error: Failed to get regulator clk-camss-ahb-no-rate:-517
  298. [ 1.742114] msm-bus-type fab-mnoc: Error: Failed to get regulator clk-camss-ahb-no-rate:-517
  299. [ 1.750534] msm-bus-type fab-mnoc: Error: Failed to get regulator clk-camss-ahb-no-rate:-517
  300. [ 1.758952] msm-bus-type fab-mnoc: Error: Failed to get regulator clk-camss-ahb-no-rate:-517
  301. [ 1.767370] msm_bus_dev_init_qos: Skipping QOS init for 727
  302. [ 1.785415] vgaarb: loaded
  303. [ 1.785830] SCSI subsystem initialized
  304. [ 1.787427] usbcore: registered new interface driver usbfs
  305. [ 1.790940] usbcore: registered new interface driver hub
  306. [ 1.796492] usbcore: registered new device driver usb
  307. [ 1.801955] soc:usb_nop_phy supply vcc not found, using dummy regulator
  308. [ 1.807030] qcom,qpnp-power-on 800f000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'warm' boot
  309. [ 1.813278] qcom,qpnp-power-on 800f000.qcom,spmi:qcom,pm8998@0:qcom,power-on@800: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
  310. [ 1.826895] input: qpnp_pon as /devices/virtual/input/input0
  311. [ 1.842285] qcom,qpnp-power-on 800f000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: No PON config. specified
  312. [ 1.847572] qcom,qpnp-power-on 800f000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: PMIC@SID2 Power-on reason: Triggered from PON1 (secondary PMIC) and 'warm' boot
  313. [ 1.857028] qcom,qpnp-power-on 800f000.qcom,spmi:qcom,pmi8998@2:qcom,power-on@800: PMIC@SID2: Power-off reason: Triggered from GP1 (Keypad_Reset1)
  314. [ 1.871781] media: Linux media interface: v0.10
  315. [ 1.884683] Linux video capture interface: v2.00
  316. [ 1.889753] cpufreq: driver msm up and running
  317. [ 1.894232] platform soc:qcom,ion:qcom,ion-heap@22: assigned reserved memory node adsp_region
  318. [ 1.898351] platform soc:qcom,ion:qcom,ion-heap@27: assigned reserved memory node qseecom_region
  319. [ 1.906957] platform soc:qcom,ion:qcom,ion-heap@13: assigned reserved memory node sp_region
  320. [ 1.915795] platform soc:qcom,ion:qcom,ion-heap@10: assigned reserved memory node secure_region
  321. [ 1.923921] ION heap system created
  322. [ 1.932481] ION heap adsp created at 0x00000000f6400000 with size 800000
  323. [ 1.935894] ION heap qsecom created at 0x00000000f8c00000 with size 1400000
  324. [ 1.942837] ION heap spss created at 0x00000000f5c00000 with size 800000
  325. [ 1.949521] ION heap secure_display created at 0x00000000fa000000 with size 5c00000
  326. [ 1.956466] ION heap secure_heap created
  327. [ 1.964000] PMIC@SID0: PM8998 v2.0 options: 0, 0, 0, 0
  328. [ 1.968077] PMIC@SID2: PMI8998 v2.1 options: 0, 0, 0, 0
  329. [ 1.973016] PMIC@SID4: PM8005 v2.0 options: 0, 0, 0, 0
  330. [ 1.978653] ipa ipa_smmu_wlan_cb_probe:5207 could not alloc iommu domain
  331. [ 1.983352] IPA smmu_info.s1_bypass=1 smmu_info.fast_map=0
  332. [ 1.990398] ipa ipa_smmu_wlan_cb_probe:5207 could not alloc iommu domain
  333. [ 1.996484] gdsc_vfe0: supplied by gdsc_camss_top
  334. [ 2.002379] gdsc_vfe1: supplied by gdsc_camss_top
  335. [ 2.006979] gdsc_cpp: supplied by gdsc_camss_top
  336. [ 2.011816] gdsc_gpu_gx: supplied by gfx_corner
  337. [ 2.016749] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
  338. [ 2.020523] mdss_pll_probe: mdss_pll_probe: label=MDSS DSI 0 PLL PLL SSC enabled
  339. [ 2.038469] dp_pll_lock_status: dp_pll_lock_status: C_READY status is not high. Status=0
  340. [ 2.039460] mdss_pll_probe: MDSS pll label = MDSS DP PLL
  341. [ 2.052951] arm-smmu cd00000.arm,smmu-mmss: found 20 context interrupt(s) but have 17 context banks. assuming 17 context interrupts.
  342. [ 2.053031] arm-smmu 5040000.arm,smmu-kgsl: regulator defer delay 80
  343. [ 2.064975] iommu: Adding device soc:usb_audio_qmi_dev to group 0
  344. [ 2.070364] iommu: Adding device 18800000.qcom,icnss to group 1
  345. [ 2.076325] iommu: Adding device soc:iommu_test_device to group 2
  346. [ 2.081996] iommu: Adding device soc:iommu_coherent_test_device to group 3
  347. [ 2.088580] iommu: Adding device soc:qcom,msm-audio-ion to group 4
  348. [ 2.095167] iommu: Adding device c900000.qcom,sde_kms to group 5
  349. [ 2.101402] iommu: Adding device 1e00000.qcom,ipa:ipa_smmu_ap to group 6
  350. [ 2.107339] iommu: Adding device 1e00000.qcom,ipa:ipa_smmu_wlan to group 7
  351. [ 2.114023] iommu: Adding device 1e00000.qcom,ipa:ipa_smmu_uc to group 8
  352. [ 2.121154] dev-cpufreq: No tables parsed from DT.
  353. [ 2.127615] Advanced Linux Sound Architecture Driver Initialized.
  354. [ 2.132358] Bluetooth: fffffffbb652bcd8
  355. [ 2.138322] NET: Registered protocol family 31
  356. [ 2.142127] Bluetooth: fffffffbb652bcd8
  357. [ 2.146486] Bluetooth: fffffffbb652bcb8Bluetooth: fffffffbb652bc98Bluetooth: fffffffbb652bc98
  358. [ 2.156643] cfg80211: World regulatory domain updated:
  359. [ 2.160195] cfg80211: DFS Master region: unset
  360. [ 2.165226] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  361. [ 2.169842] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  362. [ 2.179385] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  363. [ 2.187196] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  364. [ 2.195185] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  365. [ 2.203169] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  366. [ 2.211156] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  367. [ 2.219141] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  368. [ 2.227127] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  369. [ 2.235120] NetLabel: Initializing
  370. [ 2.243433] NetLabel: domain hash size = 128
  371. [ 2.246647] NetLabel: protocols = UNLABELED CIPSOv4
  372. [ 2.251090] NetLabel: unlabeled traffic allowed by default
  373. [ 2.256156] pcie:pcie_init.
  374. [ 2.263066] qpnp_labibb_regulator_probe: LAB/IBB registered successfully, lab_vreg enable=1 ibb_vreg enable=1 swire_control=0
  375. [ 2.266631] ipa ipa3_uc_state_check:302 uC interface not initialized
  376. [ 2.277426] ipa ipa3_set_resorce_groups_min_max_limits:3448 skip configuring ipa_rx_hps_clients from HLOS
  377. [ 2.282662] ipa ipa3_uc_state_check:302 uC interface not initialized
  378. [ 2.293113] clocksource: Switched to clocksource arch_sys_counter
  379. [ 2.311158] pnp: PnP ACPI: disabled
  380. [ 2.313434] NET: Registered protocol family 2
  381. [ 2.313709] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  382. [ 2.318143] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
  383. [ 2.325378] TCP: Hash tables configured (established 65536 bind 65536)
  384. [ 2.331996] UDP hash table entries: 4096 (order: 5, 131072 bytes)
  385. [ 2.338321] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
  386. [ 2.344565] NET: Registered protocol family 1
  387. [ 2.350885] PCI: CLS 0 bytes, default 64
  388. [ 2.351181] Trying to unpack rootfs image as initramfs...
  389. [ 2.367281] Freeing initrd memory: 984K (fffffffa43400000 - fffffffa434f6000)
  390. [ 2.370848] vmscan: error setting kswapd cpu affinity mask
  391. [ 2.375037] VFS: Disk quotas dquot_6.6.0
  392. [ 2.378814] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  393. [ 2.383442] Registering sdcardfs 0.1
  394. [ 2.389698] fuse init (API version 7.23)
  395. [ 2.393459] pfk_ecryptfs [pfk_ecryptfs_lsm_init]: PFE eCryptfs requires se linux to be enabled
  396. [ 2.397211] pfk_ext4 [pfk_ext4_init]: PFK EXT4 inited successfully
  397. [ 2.405615] pfk [pfk_init]: Driver initialized successfully
  398. [ 2.414647] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  399. [ 2.417264] io scheduler noop registered
  400. [ 2.424877] io scheduler deadline registered
  401. [ 2.428826] io scheduler cfq registered (default)
  402. [ 2.433065] io scheduler bfq registered
  403. [ 2.437642] BFQ I/O-scheduler: v8r5
  404. [ 2.443824] msm_dss_get_res_byname: 'vbif_nrt_phys' resource not found
  405. [ 2.444936] mdss_mdp_probe+0x1e8/0x150c->msm_dss_ioremap_byname: 'vbif_nrt_phys' msm_dss_get_res_byname failed
  406. [ 2.451586] mdss_mdp_irq_clk_register: unable to get clk: throttle_bus_clk
  407. [ 2.461864] No change in context(0==0), skip
  408. [ 2.469600] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:0 num:0 rect:0 ndx:0x1 prio:0
  409. [ 2.472641] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:4 num:1 rect:0 ndx:0x2 prio:1
  410. [ 2.480706] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:8 num:2 rect:0 ndx:0x4 prio:2
  411. [ 2.488952] mdss_mdp_pipe_addr_setup: type:0 ftchid:-1 xinid:12 num:8 rect:0 ndx:0x100 prio:3
  412. [ 2.497224] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:1 num:6 rect:0 ndx:0x40 prio:4
  413. [ 2.505795] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:1 num:6 rect:1 ndx:0x40 prio:4
  414. [ 2.513955] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:5 num:7 rect:0 ndx:0x80 prio:5
  415. [ 2.522293] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:5 num:7 rect:1 ndx:0x80 prio:5
  416. [ 2.530619] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:9 num:12 rect:0 ndx:0x1000 prio:6
  417. [ 2.538963] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:9 num:12 rect:1 ndx:0x1000 prio:6
  418. [ 2.547634] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:13 num:13 rect:0 ndx:0x2000 prio:7
  419. [ 2.556240] mdss_mdp_pipe_addr_setup: type:2 ftchid:-1 xinid:13 num:13 rect:1 ndx:0x2000 prio:7
  420. [ 2.564832] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:2 num:10 rect:0 ndx:0x400 prio:0
  421. [ 2.573502] mdss_mdp_pipe_addr_setup: type:3 ftchid:-1 xinid:10 num:11 rect:0 ndx:0x800 prio:1
  422. [ 2.582186] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-pipe-sw-reset-off : u32 array read
  423. [ 2.590735] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-ib-factor-overlap : u32 array read
  424. [ 2.599632] mdss_mdp_parse_dt_handler: Error from prop qcom,mdss-bus-througput-factor : u32 array read
  425. [ 2.609011] xlog_status: enable:0, panic:1, dump:2
  426. [ 2.618342] iommu: Adding device c900000.qcom,mdss_mdp:qcom,smmu_mdp_unsec_cb to group 9
  427. [ 2.622967] iommu: Adding device c900000.qcom,mdss_mdp:qcom,smmu_mdp_sec_cb to group 10
  428. [ 2.631157] mdss_mdp_probe: mdss version = 0x30000001, bootloader display is on, num 1, intf_sel=0x00000100
  429. [ 2.639506] mdss_smmu_probe: iommu v2 domain[0] mapping and clk register successful!
  430. [ 2.648603] mdss_smmu_probe: iommu v2 domain[2] mapping and clk register successful!
  431. [ 2.657694] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
  432. [ 2.664413] mdss_dsi_find_panel_of_node: cmdline:0:qcom,mdss_dsi_jdi_fhd_nt35596s_video:config2:1:none:cfg:single_dsi panel_name:qcom,mdss_dsi_jdi_fhd_nt35596s_video
  433. [ 2.670527] mdss_dsi_panel_init: Panel Name = jdi fhd video dsi panel
  434. [ 2.685007] mdss_dsi_parse_split_link_settings: enable 0 sublinks-count 0 lanes per sublink 0
  435. [ 2.691403] mdss_dsi_panel_timing_from_dt: found new timing "qcom,mdss_dsi_jdi_fhd_nt35596s_video" (fffffffaf51fc800)
  436. [ 2.699911] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
  437. [ 2.710484] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-timing-switch-command
  438. [ 2.718290] mdss_dsi_panel_get_dsc_cfg_np: cannot find dsc config node:config2
  439. [ 2.726059] mdss_dsi_parse_panel_features: ulps feature disabled
  440. [ 2.733042] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
  441. [ 2.739210] mdss_dsi_parse_dms_config: dynamic switch feature enabled: 0
  442. [ 2.746413] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-on
  443. [ 2.753185] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-lp-mode-off
  444. [ 2.759871] dyn_fps: min = 55, max = 60
  445. [ 2.766851] mdss_dsi_parse_ctrl_params:4250 Unable to read qcom,display-id, data=0000000000000000,len=20
  446. [ 2.770406] mdss_dsi_parse_gpio_params: bklt_en gpio not specified
  447. [ 2.780091] mdss_dsi_parse_gpio_params: avdd_en gpio not specified
  448. [ 2.786162] msm_dss_get_res_byname: 'dsi_phy_regulator' resource not found
  449. [ 2.792257] mdss_dsi_retrieve_ctrl_resources+0xc4/0x228->msm_dss_ioremap_byname: 'dsi_phy_regulator' msm_dss_get_res_byname failed
  450. [ 2.799123] mdss_dsi_retrieve_ctrl_resources: ctrl_base=ffffff8008622000 ctrl_size=400 phy_base=ffffff8008628400 phy_size=7c0
  451. [ 2.810962] dsi_panel_device_register: Continuous splash enabled
  452. [ 2.822237] Unable to find fb node for device: c994000.qcom,mdss_dsi_ctrl0
  453. [ 2.828378] mdss_register_panel: adding framebuffer device c994000.qcom,mdss_dsi_ctrl0
  454. [ 2.835101] mdss_dsi_shadow_clk_init: can't find mux_byte_clk. rc=-2
  455. [ 2.842854] mdss_dsi_ctrl_probe: unable to initialize shadow ctrl clks
  456. [ 2.849970] mdss_dsi_ctrl_probe: Dsi Ctrl->0 initialized, DSI rev:0x20000000, PHY rev:0x3
  457. [ 2.855816] mdss_dsi_status_init: DSI status check interval:5000
  458. [ 2.864483] mdss_register_panel: adding framebuffer device soc:qcom,mdss_wb_panel
  459. [ 2.870341] mdss_fb_probe: fb0: split_mode:0 left:0 right:0
  460. [ 2.877818] mdss_fb_register: FrameBuffer[0] 1080x2160 registered successfully!
  461. [ 2.883193] mdss_fb_probe: fb1: split_mode:0 left:0 right:0
  462. [ 2.890171] mdss_fb_register: FrameBuffer[1] 640x480 registered successfully!
  463. [ 2.895782] mdss_mdp_splash_parse_dt: splash mem child node is not present
  464. [ 2.906071] spcom [spcom_init]: spcom driver version 1.1 17-July-2017.
  465. [ 2.909890] spcom [spcom_probe]: Driver Initialization ok.
  466. [ 2.916443] audio_notifer_reg_service: service SSR_MODEM is in use
  467. [ 2.929177] memshare_child soc:qcom,memshare:qcom,client_1: for memshare_GPS segments only will be dumped.
  468. [ 2.929433] memshare_child soc:qcom,memshare:qcom,client_2: for memshare_FTM segments only will be dumped.
  469. [ 2.937916] memshare_child soc:qcom,memshare:qcom,client_3: for memshare_DIAG segments only will be dumped.
  470. [ 2.947499] In memshare_probe, Memshare probe success
  471. [ 2.957366] subsys-pil-tz soc:qcom,ipa_fws@1e08000: for ipa_fws segments only will be dumped.
  472. [ 2.963052] subsys-pil-tz cce0000.qcom,venus: for venus segments only will be dumped.
  473. [ 2.971027] subsys-pil-tz 1d0101c.qcom,spss: for spss segments only will be dumped.
  474. [ 2.978877] subsys-pil-tz soc:qcom,kgsl-hyp: for a540_zap segments only will be dumped.
  475. [ 2.986734] pil-q6v5-mss 4080000.qcom,mss: No pas_id found.
  476. [ 2.995826] pil: failed to find qcom,msm-imem-minidump node
  477. [ 3.002975] icnss 18800000.qcom,icnss: for wcss_msa0 segments only will be dumped.
  478. [ 3.005285] icnss: Platform driver probed successfully
  479. [ 3.014277] msm_rpm_log_probe: OK
  480. [ 3.019195] msm_serial: driver initialized
  481. [ 3.022275] uart_tx_gpio is not available
  482. [ 3.025225] uart_rx_gpio is not available
  483. [ 3.029303] uart_cts_gpio is not available
  484. [ 3.033296] uart_rfr_gpio is not available
  485. [ 3.037938] sps: BAM device 0x000000000c144000 is not registered yet.
  486. [ 3.041550] sps:BAM 0x000000000c144000 is registered.
  487. [ 3.049473] c171000.uart: ttyHS0 at MMIO 0xc171000 (irq = 325, base_baud = 460800) is a MSM HS UART
  488. [ 3.053847] msm_serial_hs module loaded
  489. [ 3.063014] random: nonblocking pool is initialized
  490. [ 3.067008] diag: Unable to initialize POOL_MDM_DCI_WRITE mempool, itemsize: 0 poolsize: 0
  491. [ 3.081883] iommu: Adding device 5040000.qcom,kgsl-iommu:gfx3d_user to group 11
  492. [ 3.082261] iommu: Adding device 5040000.qcom,kgsl-iommu:gfx3d_secure to group 12
  493. [ 3.098642] brd: module loaded
  494. [ 3.101972] loop: module loaded
  495. [ 3.102368] zram: Added device: zram0
  496. [ 3.104885] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x1000000
  497. [ 3.107845] QSEECOM: qseecom_retrieve_ce_data: Device does not support PFE
  498. [ 3.114251] QSEECOM: qseecom_probe: no-clock-support=0x1
  499. [ 3.120988] QSEECOM: qseecom_probe: qseecom.qsee_reentrancy_support = 2
  500. [ 3.126265] QSEECOM: qseecom_probe: qseecom.whitelist_support = 1
  501. [ 3.135952] i2c-msm-v2 c1b5000.i2c: msm_bus_scale_register_client(mstr-id:84):0xd (ok)
  502. [ 3.143952] PMIC@SID0: (null) v2.1 options: 0, 0, 0, 0
  503. [ 3.147860] I2C PMIC: i2c_pmic_probe: I2C PMIC probe successful
  504. [ 3.153635] nq-nci 6-0028: nqx_probe: probing NFCC NQxxx exited successfully
  505. [ 3.158645] qce 1de0000.qcedev: Qualcomm Crypto 5.3.4 device found @0x1de0000
  506. [ 3.164863] qce 1de0000.qcedev: CE device = 0x0
  507. [ 3.174936] sps:BAM 0x0000000001dc4000 is registered.
  508. [ 3.197249] sps:BAM 0x0000000001dc4000 (va:0xffffff8008ec0000) enabled: ver:0x27, number of pipes:16
  509. [ 3.202333] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000001dc4000 irq 68
  510. [ 3.222974] qcrypto 1de0000.qcrypto: Qualcomm Crypto 5.3.4 device found @0x1de0000
  511. [ 3.223076] qcrypto 1de0000.qcrypto: CE device = 0x0
  512. [ 3.233245] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000001dc4000 irq 68
  513. [ 3.265341] qcrypto 1de0000.qcrypto: qcrypto-ecb-aes
  514. [ 3.265542] qcrypto 1de0000.qcrypto: qcrypto-cbc-aes
  515. [ 3.269580] qcrypto 1de0000.qcrypto: qcrypto-ctr-aes
  516. [ 3.274508] qcrypto 1de0000.qcrypto: qcrypto-ecb-des
  517. [ 3.279452] qcrypto 1de0000.qcrypto: qcrypto-cbc-des
  518. [ 3.284430] qcrypto 1de0000.qcrypto: qcrypto-ecb-3des
  519. [ 3.289357] qcrypto 1de0000.qcrypto: qcrypto-cbc-3des
  520. [ 3.294303] qcrypto 1de0000.qcrypto: qcrypto-xts-aes
  521. [ 3.299340] qcrypto 1de0000.qcrypto: qcrypto-sha1
  522. [ 3.304370] qcrypto 1de0000.qcrypto: qcrypto-sha256
  523. [ 3.308992] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
  524. [ 3.313674] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
  525. [ 3.319927] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
  526. [ 3.326177] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
  527. [ 3.332805] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
  528. [ 3.339114] qcrypto 1de0000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
  529. [ 3.345538] qcrypto 1de0000.qcrypto: qcrypto-hmac-sha1
  530. [ 3.351951] qcrypto 1de0000.qcrypto: qcrypto-hmac-sha256
  531. [ 3.357066] qcrypto 1de0000.qcrypto: qcrypto-aes-ccm
  532. [ 3.362534] qcrypto 1de0000.qcrypto: qcrypto-rfc4309-aes-ccm
  533. [ 3.370103] qcom_ice_get_pdevice: found ice device fffffffaf294bc00
  534. [ 3.373009] qcom_ice_get_pdevice: matching platform device fffffffa88f52000
  535. [ 3.379529] scm_call failed: func id 0x42000c02, ret: -2, syscall returns: 0xfffffffffffffffc, 0x0, 0x0
  536. [ 3.386162] ufshcd-qcom 1da4000.ufshc: ufs_qcom_parse_reg_info: Unable to find qcom,vddp-ref-clk-supply regulator, assuming enabled
  537. [ 3.396420] scsi host0: ufshcd
  538. [ 3.411709] qcom_ice 1db0000.ufsice: QC ICE 3.0.65 device found @0xffffff8009c10000
  539. [ 3.415328] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
  540. [ 3.419081] tun: Universal TUN/TAP device driver, 1.6
  541. [ 3.424831] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  542. [ 3.429929] sky2: driver version 1.30
  543. [ 3.431147] ufshcd-qcom 1da4000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
  544. [ 3.440102] PPP generic driver version 2.4.2
  545. [ 3.452042] PPP BSD Compression module registered
  546. [ 3.456419] PPP Deflate Compression module registered
  547. [ 3.461040] PPP MPPE Compression module registered
  548. [ 3.466053] NET: Registered protocol family 24
  549. [ 3.470806] CLD80211: Initializing
  550. [ 3.475223] usbcore: registered new interface driver asix
  551. [ 3.478622] usbcore: registered new interface driver ax88179_178a
  552. [ 3.484050] usbcore: registered new interface driver cdc_ether
  553. [ 3.490120] usbcore: registered new interface driver net1080
  554. [ 3.495851] usbcore: registered new interface driver cdc_subset
  555. [ 3.501664] usbcore: registered new interface driver zaurus
  556. [ 3.507327] usbcore: registered new interface driver cdc_ncm
  557. [ 3.514289] msm_sharedmem: sharedmem_register_qmi: qmi init successful
  558. [ 3.514547] ufshcd-qcom 1da4000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
  559. [ 3.515279] scsi 0:0:0:49488: Well-known LUN SAMSUNG KLUDG4U1EA-B0C1 0100 PQ: 0 ANSI: 6
  560. [ 3.516018] scsi 0:0:0:49456: Well-known LUN SAMSUNG KLUDG4U1EA-B0C1 0100 PQ: 0 ANSI: 6
  561. [ 3.516643] scsi 0:0:0:49476: Well-known LUN SAMSUNG KLUDG4U1EA-B0C1 0100 PQ: 0 ANSI: 6
  562. [ 3.519169] scsi 0:0:0:0: Direct-Access SAMSUNG KLUDG4U1EA-B0C1 0100 PQ: 0 ANSI: 6
  563. [ 3.521436] scsi 0:0:0:1: Direct-Access SAMSUNG KLUDG4U1EA-B0C1 0100 PQ: 0 ANSI: 6
  564. [ 3.523627] scsi 0:0:0:2: Direct-Access SAMSUNG KLUDG4U1EA-B0C1 0100 PQ: 0 ANSI: 6
  565. [ 3.525842] scsi 0:0:0:3: Direct-Access SAMSUNG KLUDG4U1EA-B0C1 0100 PQ: 0 ANSI: 6
  566. [ 3.528046] scsi 0:0:0:4: Direct-Access SAMSUNG KLUDG4U1EA-B0C1 0100 PQ: 0 ANSI: 6
  567. [ 3.530457] scsi 0:0:0:5: Direct-Access SAMSUNG KLUDG4U1EA-B0C1 0100 PQ: 0 ANSI: 6
  568. [ 3.533870] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 sda15 sda16 sda17
  569. [ 3.535964] sdc: sdc1
  570. [ 3.536184] sdb: sdb1
  571. [ 3.537087] sdd: sdd1 sdd2 sdd3 sdd4 sdd5
  572. [ 3.537364] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27 sde28 sde29 sde30 sde31 sde32 sde33 sde34 sde35 sde36 sde37 sde38 sde39 sde40 sde41 sde42 sde43 sde44
  573. [ 3.538354] sdf: sdf1 sdf2 sdf3 sdf4 sdf5 sdf6
  574. [ 3.538976] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
  575. [ 3.539823] branch_clk_set_rate: Cannot scale gcc_rx1_usb2_clkref_clk clock while HW gating is enabled. Use corresponding hw_ctl_clk to scale it
  576. [ 3.540873] msm-dwc3 a800000.ssusb: unable to get dbm device
  577. [ 3.541626] usbcore: registered new interface driver usb-storage
  578. [ 3.542473] qpnp-pdphy 800f000.qcom,spmi:qcom,pmi8998@2:qcom,usb-pdphy@1700: usbpd_create failed: -517
  579. [ 3.542924] mousedev: PS/2 mouse device common for all mice
  580. [ 3.757175] i2c-msm-v2 c179000.i2c: msm_bus_scale_register_client(mstr-id:86):0x11 (ok)
  581. [ 3.759498] synaptics_rmi4_f12_init 2736: fhandler->full_addr.query_base = 0x0049
  582. [ 3.764081] synaptics_rmi4_f12_init 2737: fhandler->full_addr.ctrl_base = 0x0012
  583. [ 3.771711] synaptics_rmi4_f12_init 2738: size_of_query5 = 9
  584. [ 3.779154] synaptics_rmi4_f12_init 2744: size_of_query5 = 9
  585. [ 3.792945] synaptics_dsi_force 5-0020: synaptics_rmi4_f1a_button_map: Button map is missing in board file
  586. [ 3.800034] input: synaptics_dsx as /devices/soc/c179000.i2c/i2c-5/5-0020/input/input1
  587. [ 3.802201] synaptics_dsi_force 5-0020: chip info: 0x53 0x33 0x33 0x33 0x30 0x00 0x00 0x00
  588. [ 3.811415] input: uinput-goodix as /devices/virtual/input/input2
  589. [ 3.818702] fpc1020 soc:fingerprint_fpc: found pin control fpc1020_reset_reset
  590. [ 3.823886] fpc1020 soc:fingerprint_fpc: found pin control fpc1020_reset_active
  591. [ 3.831000] fpc1020 soc:fingerprint_fpc: found pin control fpc1020_irq_active
  592. [ 3.838236] fpc1020 soc:fingerprint_fpc: fpc1020_probe: ok
  593. [ 3.845520] fpc1020_init OK
  594. [ 3.851416] qcom,qpnp-rtc 800f000.qcom,spmi:qcom,pm8998@0:qcom,pm8998_rtc: rtc core: registered qpnp_rtc as rtc0
  595. [ 3.853891] i2c /dev entries driver
  596. [ 3.864288] peelir_init:npages = 150
  597. [ 3.867976] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb1 to group 13
  598. [ 3.871252] CAM-SMMU cam_smmu_populate_sids:2331 __debug cnt = 8, cb->name: :vfe sid [0] = 3072
  599. [ 3.878067] CAM-SMMU cam_smmu_populate_sids:2331 __debug cnt = 8, cb->name: :vfe sid [1] = 3073
  600. [ 3.904994] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb2 to group 14
  601. [ 3.914838] CAM-SMMU cam_smmu_populate_sids:2331 __debug cnt = 2, cb->name: :cpp sid [0] = 2560
  602. [ 3.922153] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb3 to group 15
  603. [ 3.931212] CAM-SMMU cam_smmu_populate_sids:2331 __debug cnt = 2, cb->name: :camera_fd sid [0] = 2561
  604. [ 3.938384] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb4 to group 16
  605. [ 3.947975] CAM-SMMU cam_smmu_populate_sids:2331 __debug cnt = 2, cb->name: :jpeg_enc0 sid [0] = 2048
  606. [ 3.955147] iommu: Adding device soc:qcom,cam_smmu:msm_cam_smmu_cb5 to group 17
  607. [ 3.964720] CAM-SMMU cam_smmu_populate_sids:2331 __debug cnt = 2, cb->name: :jpeg_dma sid [0] = 2049
  608. [ 3.975068] CAM-SOC msm_camera_get_reg_base:872 err: mem resource csiphy_clk_mux not found
  609. [ 3.981349] csiphy_probe: no mem resource?
  610. [ 3.989845] CAM-SOC msm_camera_get_reg_base:872 err: mem resource csiphy_clk_mux not found
  611. [ 3.993596] csiphy_probe: no mem resource?
  612. [ 4.002137] CAM-SOC msm_camera_get_reg_base:872 err: mem resource csiphy_clk_mux not found
  613. [ 4.005921] csiphy_probe: no mem resource?
  614. [ 4.016104] msm_actuator_platform_probe:2105 msm_actuator_platform_probe: No/Error Actuator GPIOs
  615. [ 4.022675] msm_cci_init:1439: hw_version = 0x10060000
  616. [ 4.143751] msm_eeprom_platform_probe: sensor_eeprom_name[0] = chiron_imx386_semco, probe success!
  617. [ 4.159815] msm_cci_init:1439: hw_version = 0x10060000
  618. [ 4.159890] qcom,slave-addr = 0x6C
  619. [ 4.185091] msm_eeprom_platform_probe: sensor_eeprom_name[1] = chiron_ov5675_primax, probe success!
  620. [ 4.200511] msm_cci_init:1439: hw_version = 0x10060000
  621. [ 4.200578] qcom,slave-addr = 0x6C
  622. [ 4.224957] qcom,eeprom: probe of ca0c000.qcom,cci:qcom,eeprom@3 failed with error -12
  623. [ 4.226273] msm_ois_platform_probe:1155 msm_ois_platform_probe: 1155: OIS no GPIO control
  624. [ 4.234973] OIS SENSOR_SUPPORT_OIS_FLAG true
  625. [ 4.244857] MSM-CPP cpp_init_hardware:1138 CPP HW Version: 0x60010000
  626. [ 4.244937] MSM-CPP cpp_init_hardware:1156 stream_cnt:0
  627. [ 4.251116] MSM-CPP cpp_release_hardware:1219 cpp hw release done
  628. [ 4.256535] CAM-SOC msm_camera_get_reg_base:872 err: mem resource vfe_fuse not found
  629. [ 4.262032] CAM-SOC msm_camera_get_res_size:915 err: mem resource vfe_fuse not found
  630. [ 4.270408] CAM-SOC msm_camera_get_reg_base:872 err: mem resource vfe_fuse not found
  631. [ 4.277570] CAM-SOC msm_camera_get_res_size:915 err: mem resource vfe_fuse not found
  632. [ 4.287683] __msm_jpeg_init:1537] Jpeg Device id 0
  633. [ 4.294994] msm_fd_hw_set_dt_parms_by_name: Error property does not exist
  634. [ 4.396797] msm_fd caa4000.qcom,fd: Face detection halt timeout
  635. [ 4.400861] iommu: Adding device cc00000.qcom,vidc:non_secure_cb to group 18
  636. [ 4.404264] iommu: Adding device cc00000.qcom,vidc:firmware_cb to group 19
  637. [ 4.409087] iommu: Adding device cc00000.qcom,vidc:secure_bitstream_cb to group 20
  638. [ 4.417926] iommu: Adding device cc00000.qcom,vidc:secure_pixel_cb to group 21
  639. [ 4.424174] iommu: Adding device cc00000.qcom,vidc:secure_non_pixel_cb to group 22
  640. [ 4.432845] c880000.qcom,vmem supply vdd not found, using dummy regulator
  641. [ 4.439241] msm_vidc_vmem: Up and running with 4 banks of memory from [io size 0x44a42d6c9 64bit window disabled]
  642. [ 4.445907] sde_mdp_parse_dt_prop_len: <SDEROT_INFO> prop qcom,mdss-rot-xin-id : doesn't exist in device tree
  643. [ 4.455202] iommu: Adding device c900000.qcom,mdss_rotator:qcom,smmu_rot_unsec_cb to group 23
  644. [ 4.465161] iommu: Adding device c900000.qcom,mdss_rotator:qcom,smmu_rot_sec_cb to group 24
  645. [ 4.473843] No change in context(0==0), skip
  646. [ 4.482737] sde_rotator_evtlog_create_debugfs: evtlog_status: enable:0, panic:1, dump:2
  647. [ 4.486214] sde_rotator c900000.qcom,mdss_rotator: <SDEROT_INFO> SDE v4l2 rotator probe success
  648. [ 4.494553] sde_smmu_probe: <SDEROT_INFO> iommu v2 domain[0] mapping and clk register successful!
  649. [ 4.502774] sde_smmu_probe: <SDEROT_INFO> iommu v2 domain[1] mapping and clk register successful!
  650. [ 4.514742] thermal thermal_zone0: failed to read out thermal zone (-19)
  651. [ 4.528862] QPNP SMB2 probed successfully usb:present=1 type=0 batt:present = 1 health = 1 charge = 1
  652. [ 4.555224] msm_lmh_dcvs:lmh_activate_trip lmh_activate_trip: disable not supported
  653. [ 4.556074] msm_lmh_dcvs:lmh_activate_trip lmh_activate_trip: disable not supported
  654. [ 4.562084] md: linear personality registered for level -1
  655. [ 4.569488] device-mapper: uevent: version 1.0.3
  656. [ 4.575198] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
  657. [ 4.579782] device-mapper: req-crypt: dm-req-crypt successfully initalized.
  658. [ 4.588463] bt_power_populate_dt_pinfo: bt-reset-gpio not provided in device tree
  659. [ 4.600293] usbcore: registered new interface driver usbhid
  660. [ 4.603942] usbhid: USB HID core driver
  661. [ 4.609412] ashmem: initialized
  662. [ 4.613297] qpnp_coincell_charger_show_state: enabled=Y, voltage=3200 mV, resistance=800 ohm
  663. [ 4.617107] bimc-bwmon 1008000.qcom,cpu-bwmon: BW HWmon governor registered.
  664. [ 4.627341] devfreq soc:qcom,cpubw: Couldn't update frequency transition information.
  665. [ 4.635901] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
  666. [ 4.640606] usbcore: registered new interface driver snd-usb-audio
  667. [ 4.651011] tfa98xx_i2c_init(): TFA98XX driver version 2.11.2
  668. [ 4.653487] tas2559 10-004c: tas2559_i2c_probe enter
  669. [ 4.659307] tas2559 10-004c: Looking up ti,tas2560-reset-gpio property in node /soc/i2c@c1b8000/tas2559@4c failed -2
  670. [ 4.672853] i2c-msm-v2 c1b8000.i2c: msm_bus_scale_register_client(mstr-id:84):0x1f (ok)
  671. [ 4.676931] tas2559 10-004c: TAS2559 PGID=0xa0
  672. [ 4.682682] tas2559 10-004c: TAS2560 PGID=0x00
  673. [ 4.687076] tas2559 10-004c: tas2559_register_codec, enter
  674. [ 4.691544] tas2559 10-004c: tas2559_register_misc, leave
  675. [ 4.696943] tas2559 10-004c: tiload_driver_init
  676. [ 4.702414] tas2559 10-004c: allocated Major Number: 224
  677. [ 4.706827] tas2559 10-004c: Registered TiLoad driver, Major number: 224
  678. [ 4.712314] tas2559 10-004c: Firmware file name is tas2559_uCDSP.bin
  679. [ 4.724286] msm-dai-tdm soc:qcom,msm-dai-tdm-pri-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-pri-rx group_id: 0x9100
  680. [ 4.725446] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-0 dev_id: 0x9000
  681. [ 4.736950] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-rx:qcom,msm-dai-q6-tdm-pri-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
  682. [ 4.754104] msm-dai-tdm soc:qcom,msm-dai-tdm-pri-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-pri-tx group_id: 0x9101
  683. [ 4.766784] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-0 dev_id: 0x9001
  684. [ 4.778405] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-pri-tx:qcom,msm-dai-q6-tdm-pri-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
  685. [ 4.795585] msm-dai-tdm soc:qcom,msm-dai-tdm-sec-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-sec-rx group_id: 0x9110
  686. [ 4.808257] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-0 dev_id: 0x9010
  687. [ 4.819901] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-rx:qcom,msm-dai-q6-tdm-sec-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
  688. [ 4.837085] msm-dai-tdm soc:qcom,msm-dai-tdm-sec-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx group_id: 0x9111
  689. [ 4.849749] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0 dev_id: 0x9011
  690. [ 4.861394] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-sec-tx:qcom,msm-dai-q6-tdm-sec-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
  691. [ 4.878574] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx group_id: 0x9120
  692. [ 4.891243] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0 dev_id: 0x9020
  693. [ 4.902886] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-rx:qcom,msm-dai-q6-tdm-tert-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
  694. [ 4.920586] msm-dai-tdm soc:qcom,msm-dai-tdm-tert-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx group_id: 0x9121
  695. [ 4.933603] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0 dev_id: 0x9021
  696. [ 4.945081] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-tert-tx:qcom,msm-dai-q6-tdm-tert-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
  697. [ 4.962776] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-rx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx group_id: 0x9130
  698. [ 4.975796] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0 dev_id: 0x9030
  699. [ 4.987262] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-rx:qcom,msm-dai-q6-tdm-quat-rx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
  700. [ 5.004959] msm-dai-tdm soc:qcom,msm-dai-tdm-quat-tx: msm_dai_tdm_q6_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx group_id: 0x9131
  701. [ 5.017977] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: dev_name: soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0 dev_id: 0x9031
  702. [ 5.029449] msm-dai-q6-tdm soc:qcom,msm-dai-tdm-quat-tx:qcom,msm-dai-q6-tdm-quat-tx-0: msm_dai_q6_tdm_dev_probe: Custom tdm header not supported
  703. [ 5.056885] msm8998-asoc-snd 1711a000.sound-9335: msm_init_wsa_dev: Max WSA devices is 0 for this target?
  704. [ 5.060127] msm8998-asoc-snd 1711a000.sound-9335: ASoC: platform (null) not registered
  705. [ 5.069700] GACT probability NOT on
  706. [ 5.077323] Mirror/redirect action on
  707. [ 5.080711] u32 classifier
  708. [ 5.084517] Actions configured
  709. [ 5.087136] Netfilter messages via NETLINK v0.30.
  710. [ 5.090518] nfnl_acct: registering with nfnetlink.
  711. [ 5.095303] nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
  712. [ 5.100210] ctnetlink v0.93: registering with nfnetlink.
  713. [ 5.106402] xt_time: kernel timezone is -0000
  714. [ 5.111879] ip_tables: (C) 2000-2006 Netfilter Core Team
  715. [ 5.115933] arp_tables: (C) 2002 David S. Miller
  716. [ 5.121317] Initializing XFRM netlink socket
  717. [ 5.125963] NET: Registered protocol family 10
  718. [ 5.130455] mip6: Mobile IPv6
  719. [ 5.134356] ip6_tables: (C) 2000-2006 Netfilter Core Team
  720. [ 5.137606] sit: IPv6 over IPv4 tunneling driver
  721. [ 5.142912] NET: Registered protocol family 17
  722. [ 5.147473] NET: Registered protocol family 15
  723. [ 5.151727] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
  724. [ 5.156167] Ebtables v2.0 registered
  725. [ 5.169004] Bluetooth: fffffffbb652bc98
  726. [ 5.172462] Bluetooth: fffffffbb652bcd8
  727. [ 5.176206] l2tp_core: L2TP core driver, V2.0
  728. [ 5.179844] l2tp_ppp: PPPoL2TP kernel driver, V2.0
  729. [ 5.184187] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
  730. [ 5.188874] l2tp_netlink: L2TP netlink interface
  731. [ 5.194352] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
  732. [ 5.199202] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
  733. [ 5.205155] NET: Registered protocol family 27
  734. [ 5.215632] subsys-pil-tz 17300000.qcom,lpass: for adsp segments only will be dumped.
  735. [ 5.216400] subsys-pil-tz 5c00000.qcom,ssc: for slpi segments only will be dumped.
  736. [ 5.224085] pil-q6v5-mss 4080000.qcom,mss: No pas_id found.
  737. [ 5.231405] platform 4080000.qcom,mss:qcom,mba-mem@0: assigned reserved memory node pil_mba_region@94500000
  738. [ 5.236823] pil-q6v5-mss 4080000.qcom,mss: for modem segments only will be dumped.
  739. [ 5.246394] pil-q6v5-mss 4080000.qcom,mss: for md_modem segments only will be dumped.
  740. [ 5.255328] sps:BAM 0x000000000a904000 is registered.
  741. [ 5.262070] Invalid index Defaulting curr to 0
  742. [ 5.267063] ipa_rm ipa_rm_delete_resource:152 resource does not exist
  743. [ 5.271259] usb_bam_ipa_delete_resources: Failed to delete USB_PROD resource
  744. [ 5.277601] ipa_rm ipa_rm_delete_resource:152 resource does not exist
  745. [ 5.284711] usb_bam_ipa_delete_resources: Failed to delete USB_CONS resource
  746. [ 5.298394] thermal thermal_zone32: failed to read out thermal zone (-19)
  747. [ 5.298557] spmi spmi-0: cleanup_irq apid=58 sid=0x2 per=0x40 irq=1
  748. [ 5.300161] FG: fg_gen3_probe: battery SOC:100 voltage: 4339832uV temp: 340 id: 0KOhms
  749. [ 5.311061] FG: fg_psy_get_property: unsupported property 4
  750. [ 5.315064] SMB138X: smb138x_parallel_get_prop: parallel power supply get prop 4 not supported
  751. [ 5.315303] SMB138X: smb138x_probe: SMB138X probed successfully mode=1
  752. [ 5.316736] SMB138X: smb138x_get_prop_charger_temp: Couldnt read chg temp at 1th iteration rc = -61
  753. [ 5.317880] SMB138X: smb138x_get_prop_connector_health: Couldn't read connector temperature rc=-61
  754. [ 5.322861] msm8998-asoc-snd 1711a000.sound-9335: msm_init_wsa_dev: Max WSA devices is 0 for this target?
  755. [ 5.322937] msm8998-asoc-snd 1711a000.sound-9335: ASoC: platform (null) not registered
  756. [ 5.325799] SMB138X: smb138x_parallel_get_prop: parallel power supply get prop 4 not supported
  757. [ 5.327223] SMB138X: smb138x_get_prop_charger_temp: Couldnt read chg temp at 1th iteration rc = -61
  758. [ 5.328189] SMB138X: smb138x_get_prop_connector_health: Couldn't read connector temperature rc=-61
  759. [ 5.333860] sps:BAM 0x000000000a904000 is registered.
  760. [ 5.333860] msm-dwc3 a800000.ssusb: charger detection in progress
  761. [ 5.340578] msm8998-asoc-snd 1711a000.sound-9335: msm_init_wsa_dev: Max WSA devices is 0 for this target?
  762. [ 5.340647] msm8998-asoc-snd 1711a000.sound-9335: ASoC: platform (null) not registered
  763. [ 5.348519] Registered cp15_barrier emulation handler
  764. [ 5.357540] Registered setend emulation handler
  765. [ 5.357585] core_ctl: Creating CPU group 0
  766. [ 5.357586] core_ctl: Init CPU0 state
  767. [ 5.357586] core_ctl: Init CPU1 state
  768. [ 5.357587] core_ctl: Init CPU2 state
  769. [ 5.357587] core_ctl: Init CPU3 state
  770. [ 5.357662] core_ctl: Creating CPU group 4
  771. [ 5.357663] core_ctl: Init CPU4 state
  772. [ 5.357663] core_ctl: Init CPU5 state
  773. [ 5.357664] core_ctl: Init CPU6 state
  774. [ 5.357664] core_ctl: Init CPU7 state
  775. [ 5.357951] bootconsole [uart0] disabled
  776. [ 5.477117] registered taskstats version 1
  777. [ 5.477911] Key type encrypted registered
  778. [ 5.477932] msm_smem 86000000.qcom,smem: for smem segments only will be dumped.
  779. [ 5.478042] spss_utils [spss_init]: spss-utils driver Ver 1.2 13-Jan-2017.
  780. [ 5.478244] spss_utils [spss_probe]: Initialization completed ok, firmware_name [spss2p].
  781. [ 5.478909] fastrpc soc:qcom,msm-adsprpc-mem: for adsp_rh segments only will be dumped.
  782. [ 5.478972] ADSPRPC: gcinfo[0].heap_vmid 6
  783. [ 5.479033] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_cpz_cb1 to group 25
  784. [ 5.479711] FG: fg_get_time_to_full_locked: battery profile is not loaded
  785. [ 5.479827] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb1 to group 26
  786. [ 5.480220] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb2 to group 27
  787. [ 5.480603] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb3 to group 28
  788. [ 5.480997] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb4 to group 29
  789. [ 5.481380] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb6 to group 30
  790. [ 5.481772] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb7 to group 31
  791. [ 5.482156] iommu: Adding device soc:qcom,msm_fastrpc:qcom,msm_fastrpc_compute_cb8 to group 32
  792. [ 5.489866] msm8998-asoc-snd 1711a000.sound-9335: msm_init_wsa_dev: Max WSA devices is 0 for this target?
  793. [ 5.489946] msm8998-asoc-snd 1711a000.sound-9335: ASoC: platform (null) not registered
  794. [ 5.496608] RNDIS_IPA module is loaded.
  795. [ 5.497495] msm8998-asoc-snd 1711a000.sound-9335: msm_init_wsa_dev: Max WSA devices is 0 for this target?
  796. [ 5.497565] msm8998-asoc-snd 1711a000.sound-9335: ASoC: platform (null) not registered
  797. [ 5.497878] input: gpio-keys as /devices/soc/soc:gpio_keys/input/input3
  798. [ 5.498121] qcom,qpnp-r
RAW Paste Data