WL700_kamikaze_update

http: Unmounting all pools in preparation for image upgrade.
md: marking sb clean...
md: updating md2 RAID superblock on device
md: md/1 [events: 000001b4]<6>(write) md/1's sb offset: 243567424
md: md2 stopped.
md: unbind<md/1,0>
md: export_rdev(md/1)
md: marking sb clean...
md: md1 stopped.
md: unbind<ide/host2/bus0/target0/lun0/part3,0>
md: export_rdev(ide/host2/bus0/target0/lun0/part3)
Upgrading..................................................................................................................................................................http: While downloading new image, found good CRC.
done
httpd: Error 400: Bad Request - No request found.
killall: ctorrent: no process killed
killall: snarf: no process killed
killall: ctorrent: no process killed
killall: snarf: no process killed
Terminated
rc start shutdown system
killall: ctorrent: no process killed
killall: snarf: no process killed
killall: ctorrent: no process killed
killall: snarf: no process killed
Sending SIGTERM to all processes
Exiting Syslogd!
info, Received SIGTERM
ERASE PREVIOUS FIRMWARE
Sending SIGKILL md: recovery thread got woken up ...
to all processesmd0: no spare disk to reconstruct array! -- continuing in degraded mode
md: recovery thread finished ...
md: stopping all md devices.
md: marking sb clean...
md: md0 switched to read-only mode.
flushing ide devices: hde
Restarting system.
Please stand by while rebooting the system...
CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: | 12 29 20:36:58 CST 2005 ([email protected])
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.
Initializing Arena
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.23.0
rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)
CPU type 0x29006: 264MHz
Total memory: 67108864 KBytes
Total memory used by CFE:  0x80800000 - 0x8089BA00 (637440)
Initialized Data:          0x80831B70 - 0x80834250 (9952)
BSS Area:                  0x80834250 - 0x80835A00 (6064)
Local Heap:                0x80835A00 - 0x80899A00 (409600)
Stack Area:                0x80899A00 - 0x8089BA00 (8192)
Text (code) segment:       0x80800000 - 0x80831B70 (203632)
Boot area (physical):      0x0089C000 - 0x008DC000
Relocation Factor:         I:00000000 - D:00000000
Device eth0:  hwaddr 00-1A-92-D9-02-CD, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
Null Rescue Flag.
Null Restore Flag.
set pivot_wait = 0
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 3760 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
CPU revision is: 00029006
Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.
Primary data cache 16kB, 2-way, linesize 16 bytes.
Linux version 2.4.35.4 (agb@arrakis) (gcc version 3.4.6 (OpenWrt-2.0)) #12 Wed Dec 30 19:27:21 UTC 2009
Setting the PFC to its default value
Determined physical RAM map:
 memory: 04000000 @ 00000000 (usable)
On node 0 totalpages: 16384
zone(0): 16384 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 init=/etc/preinit noinitrd console=ttyS0,115200
CPU: BCM4704 rev 8 at 264 MHz
Using 132.000 MHz high precision timer.
Calibrating delay loop... 263.78 BogoMIPS
Memory: 62868k/65536k available (1437k kernel code, 2668k reserved, 100k data, 84k init, 0k highmem)
Dentry cache hash table entries: 8192 (order: 4, 65536 bytes)
Inode cache hash table entries: 4096 (order: 3, 32768 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 16384 (order: 4, 65536 bytes)
Checking for 'wait' instruction...  unavailable.
POSIX conformance testing by UNIFIX
PCI: Initializing host
PCI: Fixing up bus 0
PCI: Fixing up bridge
PCI: Fixing up bus 1
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Registering mini_fo version $Id$
devfs: v1.12c (20020818) Richard Gooch ([email protected])
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0xb8000300 (irq = 3) is a 16550A
ttyS01 at 0xb8000400 (irq = 3) is a 16550A
b44.c:v0.93 (Mar, 2004)
eth0: Broadcom 47xx 10/100BaseT Ethernet 00:1a:92:d9:02:cd
eth1: Broadcom 47xx 10/100BaseT Ethernet 40:10:18:00:00:2c
 Amd/Fujitsu Extended Query Table v1.0 at 0x0040
Physically mapped flash: JEDEC Device ID is 0xC4. Assuming broken CFI table.
Physically mapped flash: Swapping erase regions for broken CFI table.
number of CFI chips: 1
cfi_cmdset_0002: Disabling fast programming due to code brokenness.
Flash device: 0x200000 at 0x1c000000
bootloader size: 262144
Physically mapped flash: Filesystem type: squashfs, size=0x102f8a
Updating TRX offsets and length:
old trx = [0x0000001c, 0x00000904, 0x0007c000], len=0x00191000 crc32=0x684260ca
new trx = [0x0000001c, 0x00000904, 0x0007c000], len=0x00180000 crc32=0x52e39665
Done
Creating 5 MTD partitions on "Physically mapped flash":
0x00000000-0x00040000 : "cfe"
0x00040000-0x001f0000 : "linux"
0x000bc000-0x001c0000 : "rootfs"
mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only
0x001f0000-0x00200000 : "nvram"
0x001c0000-0x001f0000 : "rootfs_data"
Initializing Cryptographic API
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 4096 bind 8192)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
NET4: Ethernet Bridge 008 for NET4.0
802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
All bugs added by David S. Miller <[email protected]>
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 84k freed
Algorithmics/MIPS FPU Emulator v1.5
mount: mounting sysfs on /sys failed: No such device
mount: mounting devfs on /dev failed: Device or resource busy
- preinit -
Press CTRL-C for failsafe
diag: Detected 'ASUS WL-700gE'
diag: Spinning up HDD and enabling leds
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
roboswitch: Probing device eth0: found!
switch-robo             5180   0 (unused)
jffs2 not ready yet; using ramdisk
mini_fo: using base directory: /
mini_fo: using storage directory: /tmp/root
- init -
Please press Enter to activate this console. jffs2.bbc: SIZE compression mode activated.
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
eth0.0: dev_set_promiscuity(master, 1)
device eth0 entered promiscuous mode
device eth0.0 entered promiscuous mode
br-lan: port 1(eth0.0) entering learning state
br-lan: port 1(eth0.0) entering forwarding state
br-lan: topology change detected, propagating
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
eth0.1: Setting MAC address to  00 1a 92 d9 02 ce.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
AEC6X80: IDE controller at PCI slot 01:02.0
PCI: Enabling device 01:02.0 (0000 -> 0003)
AEC6X80: chipset revision 16
AEC6X80: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
    ide0: BM-DMA at 0x0180-0x0187, BIOS settings: hda:pio, hdb:pio
    ide1: BM-DMA at 0x0188-0x018f, BIOS settings: hdc:pio, hdd:pio
hda: HDT722525DLAT80, ATA DISK drive
ide0 at 0x100-0x107,0x10a on irq 2
br-lan: port 1(eth0.0) entering disabled state
br-lan: port 1(eth0.0) entering learning state
br-lan: port 1(eth0.0) entering forwarding state
br-lan: topology change detected, propagating
Journalled Block Device driver loaded
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 488397168 sectors (250059 MB) w/7674KiB Cache, CHS=30401/255/63, UDMA(33)
Partition check:
 /dev/ide/host0/bus0/target0/lun0: unknown partition table
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (5953 buckets, 5953 max) - 352 bytes per conntrack
SB USB 1.1 init
usb-ohci.c: USB OHCI at membase 0xb8003000, IRQ 6
usb-ohci.c: usb-00:03.0, PCI device 14e4:4715
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Enabling device 01:03.0 (0000 -> 0001)
uhci.c: USB UHCI at I/O 0x200, IRQ 2
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Enabling device 01:03.1 (0000 -> 0001)
uhci.c: USB UHCI at I/O 0x220, IRQ 2
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
jffs2_build_filesystem(): unlocking the mtd device... done.
jffs2_build_filesystem(): erasing all blocks after the end marker... done.
mini_fo: using base directory: /
mini_fo: using storage directory: /jffs
mini_fo: build_sto_structure: failed to create storage dir [1].
mini_fo: get_neg_sto_dentry: ERROR building sto structure.