Welcome to minicom 2.8

OPTIONS: I18n
Port /dev/ttyUSB0, 19:00:29

Press CTRL-A Z for help on special keys

DDR V2.08 20220817
In
LP3,1024MB,333MHz
bw      col     bk      row     cs      dbw
32      10      8       15      1       32
OUT
Boot1 Release Time: Jan 17 2022 10:48:40, version: 1.35
ROM VER:0x56313030, 18
hamming_distance:3326 3330 3
chip_id:524b3326_0,0
ChipType = 0x12, 773
mmc2:cmd1,400
emmc reinit
mmc2:cmd1,400
emmc reinit
mmc2:cmd1,400
SdmmcInit=2 1
mmc0:cmd5,20
SdmmcInit=0 0
BootCapSize=0
UserCapSize=55000MB
FwPartOffset=2000 , 0
StorageInit ok = 62293
SecureMode = 0
Secure read PBA: 0x4
Secure read PBA: 0x404
Secure read PBA: 0x804
Secure read PBA: 0xc04
Secure read PBA: 0x1004
SecureInit ret = 0, SecureMode = 0
atags_set_bootdev: ret:(0)
GPT part:  0, name:           system, start:0x8000, size:0x100000
GPT part:  1, name:          storage, start:0x108000, size:0x1000000
GPT part:  2, name:          primary, start:0x1108000, size:0x5a63fde
no find partition:uboot.
LoadTrust Addr:0x4000
No find bl30.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0xfdc0c
RunBL31 0x40000 @ 237323 us
INFO:    Preloader serial: 5
NOTICE:  BL31: v2.3():v2.3-530-g0152b20d0:derrick.huang
NOTICE:  BL31: Built : 17:00:22, Feb  2 2023
NOTICE:  BL31:Rockchip release version: v1.0
INFO:    ARM GICv2 driver initialized
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 1
INFO:    plat_rockchip_pmu_init: pd status f00e
INFO:    BL31: Initializing runtime services
INFO:    BL31: Initializing BL32
I/TC:
I/TC: OP-TEE version: 3.13.0-743-gb5340fd65 #hisping.lin (gcc version 10.2.1 20201103 (GNU To4
I/TC: Primary CPU initializing
I/TC: Primary CPU switching to normal world boot
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0x200000
INFO:    SPSR = 0x3c9


U-Boot 2017.09-g5830f5c-dirty #bruce (Sep 27 2024 - 12:09:14 +0800)

Model: Rockchip RK3326 EVB
MPIDR: 0x80000000
PreSerial: 5, raw, 0xff178000
DRAM:  1014 MiB
Sysmem: init
Relocation Offset: 3da62000
Relocation fdt: 3bc571e8 - 3bc58cd3
CR: M/C/I
Using default environment

DM: v1
no mmc device at slot 1
Found IDB in SDcard
dwmmc@ff370000: 1 (SD), dwmmc@ff390000: 0
Bootdev(atags): mmc 1
MMC1: Legacy, 52Mhz
PartType: EFI
reading rf3536k3ka.dtb
107490 bytes read in 6 ms (17.1 MiB/s)
DTB(Distro): rf3536k3ka.dtb
I2c0 speed: 400000Hz
PMIC:  RK8170 (on=0x80, off=0x80)
vdd_logic 1100000 uV
vdd_arm 1100000 uV
io-domain: OK
arm clk value is 816000000
Could not find baseparameter partition
Model: Rockchip rk3326 evb lpddr3 v12 board for linux
MPIDR: 0x80000000
DC is valid
charge_red_gpio is invalid
charge_blue_gpio is invalid
in is_rk817_bat_first_pwron value=97
zd has update battery !!!
not first powen on ...
Enable charge animation display
charge_animation:  soc = 96, voltage = 4041
No misc partition
boot mode: None
Exit charge: due to charger offline
CLK: (sync kernel. arm: enter 816000 KHz, init 816000 KHz, kernel 816000 KHz)
  apll 816000 KHz
  dpll 664000 KHz
  cpll 24000 KHz
  npll 1188000 KHz
  gpll 1200000 KHz
  aclk_bus 200000 KHz
  hclk_bus 150000 KHz
  pclk_bus 100000 KHz
  aclk_peri 200000 KHz
  hclk_peri 150000 KHz
  pclk_pmu 100000 KHz
No misc partition
Net:   Net Initialization Skipped
No ethernet found.
Hit key to stop autoboot('CTRL+C'):  0
Could not find misc partition
optee api revision: 2.0
TEEC: Waring: Could not find security partition
Not AVB images, AVB skip
android_image_load_by_partname: Can't find part: boot
Android image load failed
Android boot failed, error -1.
## Booting FIT Image FIT: No boot partition
FIT: No fit blob
FIT: No FIT image
Could not find misc partition
Could not find primary part
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
reading /extlinux/extlinux.conf
283 bytes read in 2 ms (137.7 KiB/s)
1:      ArkOS
Retrieving file: /uInitrd
reading /uInitrd
13194771 bytes read in 551 ms (22.8 MiB/s)
Retrieving file: /Image
reading /Image
22265864 bytes read in 927 ms (22.9 MiB/s)
bruce --append: earlyprintk console=ttyFIQ0 rw root=/dev/mmcblk1p2 rootfstype=ext4 loglevel=70
Retrieving file: /rf3536k3ka.dtb
reading /rf3536k3ka.dtb
107490 bytes read in 6 ms (17.1 MiB/s)
FIT: No boot partition
No resource file: logo.bmp
reading logo.bmp
512 bytes read in 1 ms (500 KiB/s)
FIT: No boot partition
No resource file: logo.bmp
failed to load bmp logo.bmp
reading logo.bmp
127812 bytes read in 7 ms (17.4 MiB/s)
Rockchip UBOOT DRM driver version: v1.0.1
Using display timing dts
dsi@ff450000:  detailed mode clock 30000 kHz, flags[a]
    H: 0640 0686 0688 0732
    V: 0480 0496 0498 0512
bus_format: 100e
VOP:0xff460000 update mode to: 640x480p80, type: MIPI0
VOP:0xff460000 set crtc_clock to 30000KHz
final DSI-Link bandwidth: 198 Mbps x 4
Fdt Ramdisk skip relocation
No misc partition
## Loading init Ramdisk from Legacy Image at 0a200000 ...
   Image Name:   uInitrd
   Image Type:   ARM Linux RAMDisk Image (gzip compressed)
   Data Size:    13194707 Bytes = 12.6 MiB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
## Flattened Device Tree blob at 0x08300000
   Booting using the fdt blob at 0x08300000
   Using Device Tree in place at 0000000008300000, end 000000000831d3e1
FIT: No boot partition
No resource file: logo_kernel.bmp
reading logo_kernel.bmp
512 bytes read in 1 ms (500 KiB/s)
FIT: No boot partition
No resource file: logo_kernel.bmp
failed to load bmp logo_kernel.bmp
reading logo_kernel.bmp
127812 bytes read in 7 ms (17.4 MiB/s)
WARNING: could not set reg FDT_ERR_BADOFFSET.
## reserved-memory:
  drm-logo@00000000: addr=3df00000 size=16c000
  ramoops@110000: addr=110000 size=f0000
Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
Adding bank: 0x08c00000 - 0x40000000 (size: 0x37400000)
Total: 2619.464/3120.684 ms

Starting kernel ...

I/TC: Secondary CPU 1 initializing
I/TC: Secondary CPU 1 switching to normal world boot
I/TC: Secondary CPU 2 initializing
I/TC: Secondary CPU 2 switching to normal world boot
I/TC: Secondary CPU 3 initializing
I/TC: Secondary CPU 3 switching to normal world boot
[    3.552269] fiq_debugger fiq_debugger.0: IRQ fiq not found
[    3.552305] fiq_debugger fiq_debugger.0: IRQ wakeup not found
[    3.552328] fiq_debugger_probe: could not install nmi irq handler
[    4.091651] rockchip-usb2phy ff2c0000.syscon:usb2-phy@100: IRQ index 0 not found
[    4.103219] rkvdec_init:1239: failed on clk_get clk_cabac
[    4.103772] rkvdec_init:1242: failed on clk_get clk_hevc_cabac
[    4.104405] mpp_rkvdec ff440000.hevc: shared_video_cabac is not found!
[    4.104991] rkvdec_init:1270: No cabac reset resource define
[    4.105505] mpp_rkvdec ff440000.hevc: shared_video_hevc_cabac is not found!
[    4.106123] rkvdec_init:1273: No hevc cabac reset resource define
[    4.106729] mpp_rkvdec ff440000.hevc: px30_workaround_combo_init dte_addr 03264000
[    4.110411] mpp_vdpu2 ff442400.vdpu: px30_workaround_combo_init dte_addr 0326b000
[    4.125042] arm-scmi firmware:scmi: Failed. SCMI protocol 22 not active.
[    4.145130] dw-mipi-dsi-rockchip ff450000.dsi: failed to find panel or bridge: -517
[    4.235564] rk817-battery rk817-battery: fb_temperature missing!
[    4.236119] rk817-battery rk817-battery: energy_mode missing!
[    4.236644] rk817-battery rk817-battery: zero_reserve_dsoc missing!
[    4.259970] rk817-charger rk817-charger: power_dc2otg missing!
[    4.260572] rk817-charger rk817-charger: sample_res missing!
[    4.261083] rk817-charger rk817-charger: otg5v_suspend_enable missing!
[    4.261669] rk817-charger rk817-charger: gate_function_disable missing!
[    4.304303] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
[    4.307966] rockchip,bus bus-apll: Failed to get leakage
[    4.324283] rk-multicodecs rk817-sound: ASoC: Property 'rockchip,audio-routing' does not en
[    4.405282] mali ff400000.gpu: Failed to get gpu_leakage
[    4.411967] rockchip-dmc dmc: Failed to get ddr_leakage
[    4.414873] rockchip-dmc dmc: failed to get vop bandwidth to dmc rate
[    4.415452] rockchip-dmc dmc: failed to get vop pn to msch rl
[    4.434910] devfreq dmc: Couldn't update frequency transition information.
[    4.835074] dwmmc_rockchip ff390000.dwmmc: Busy; trying anyway
[    5.335619] mmc_host mmc0: Timeout sending command (cmd 0x202000 arg 0x0 status 0x80202000)
[    5.867642] dwmmc_rockchip ff390000.dwmmc: Busy; trying anyway
e2fsck 1.45.3 (14-Jul-2019)
root: clean, 147866/524288 files, 1610329/2097152 blocks
[    6.368200] mmc_host mmc0: Timeout sending command (cmd 0x202000 arg 0x0 status 0x80202000)
[    6.899458] dwmmc_rockchip ff390000.dwmmc: Busy; trying anyway
[    7.400004] mmc_host mmc0: Timeout sending command (cmd 0x202000 arg 0x0 status 0x80202000)
[    7.423905] systemd[1]: Failed to lookup module alias 'autofs4': Function not implemented
[    7.933882] dwmmc_rockchip ff390000.dwmmc: Busy; trying anyway
[FAILED] Failed to listen on Journal Socket.
See 'systemctl status systemd-journald.socket' for details.
         Mounting Kernel Debug File System...
         Starting Load Kernel Modules...
         Starting Set the console keyboard layout...
[  OK  ] Created slice User and Session Slice.
[  OK  ] Listening on fsck to fsckd communication Socket.
[FAILED] Failed to listen on Journal Socket (/dev/log).
See 'systemctl status systemd-journald-dev-log.socket' for details.
[  OK  ] Reached target Swap.
         Starting Remount Root and Kernel File Systems...
[  OK  ] Reached target Slices.
[  OK  ] Created slice system-serial\x2dgetty.slice.
[  OK  ] Listening on udev Control Socket.
         Starting udev Coldplug all Devices...
[  OK  ] Listening on initctl Compatibility Named Pipe.
[  OK  ] Mounted Kernel Debug File System.
[  OK  ] Started Load Kernel Modules.
[  OK  ] Started Remount Root and Kernel File Systems.
         Starting Load/Save Random Seed...
         Starting Create System Users...
         Mounting Kernel Configuration File System...
         Starting Apply Kernel Variables...
         Mounting FUSE Control File System...
[  OK  ] Started Load/Save Random Seed.
[  OK  ] Mounted Kernel Configuration File System.
[  OK  ] Started Create System Users.
[  OK  ] Mounted FUSE Control File System.
[  OK  ] Started Apply Kernel Variables.
         Starting Create Static Device Nodes in /dev...
[  OK  ] Started Create Static Device Nodes in /dev.
         Starting udev Kernel Device Manager...
[  OK  ] Started Set the console keyboard layout.
[  OK  ] Reached target Local File Systems (Pre).
[  OK  ] Started udev Coldplug all Devices.
[  OK  ] Started udev Kernel Device Manager.
         Starting Show Plymouth Boot Screen...
[    8.434439] mmc_host mmc0: Timeout sending command (cmd 0x202000 arg 0x0 status 0x80202000)

Ubuntu 19.10 rg351mp ttyFIQ0

rg351mp login: