API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Sep 15th, 2018
180
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 51.93 KB | None | 0 0
raw download clone embed print report
  1. <5>[ 0.000000] Linux version 2.6.35.7+ (chris41g@localhost) (gcc version 4.4.3 (GCC) ) #1 SMP PREEMPT Sat Aug 4 22:27:01 MST 2012
  2. <4>[ 0.000000] CPU: ARMv7 Processor [412fc091] revision 1 (ARMv7), cr=10c53c7f
  3. <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
  4. <4>[ 0.000000] Machine: SAMSUNG JANICE
  5. <4>[ 0.000000] Only cachepolicy=writeback supported on ARMv6 and later
  6. <6>[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
  7. <7>[ 0.000000] On node 0 totalpages: 146944
  8. <7>[ 0.000000] free_area_init_node: node 0, pgdat c0c58820, node_mem_map c135f000
  9. <7>[ 0.000000] Normal zone: 1120 pages used for memmap
  10. <7>[ 0.000000] Normal zone: 0 pages reserved
  11. <7>[ 0.000000] Normal zone: 92832 pages, LIFO batch:31
  12. <7>[ 0.000000] HighMem zone: 414 pages used for memmap
  13. <7>[ 0.000000] HighMem zone: 52578 pages, LIFO batch:15
  14. <6>[ 0.000000] PERCPU: Embedded 10 pages/cpu @c196f000 s20288 r8192 d12480 u65536
  15. <6>[ 0.000000] pcpu-alloc: s20288 r8192 d12480 u65536 alloc=16*4096
  16. <6>[ 0.000000] pcpu-alloc: [0] 0 [0] 1
  17. <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 145410
  18. <5>[ 0.000000] Kernel command line: cachepolicy=writealloc noinitrd mpcore_wdt.mpcore_margin=359 root=/dev/ram0 rw rootwait crash_reboot=yes crash_dump=no initrd=, init=init console='null' mem=96M@0 mem_mtrace=15M@96M mem_mshared=1M@111M mem_modem=16M@112M mali.mali_mem=32M@128M mem=96M@160M hwmem=127M@256M mem_issw=1M@383M mem_ram_console=1M@384M mem=382M@385M vmalloc=328M bootmode=2 jig_smd=0 lpm_boot=0 checksum_pass=1 checksum_done=1 sec_debug.enable=0 sec_debug.enable_user=0 board_id=13 startup_graphics=1 logo. lcdtype=7 sbl_copy=1
  19. <6>[ 0.000000] JANICE Board Rev 0.6
  20. <6>[ 0.000000] Startup graphics support
  21. <6>[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  22. <6>[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  23. <6>[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  24. <6>[ 0.000000] Memory: 96MB 96MB 175MB 207MB = 574MB total
  25. <5>[ 0.000000] Memory: 562828k/562828k available, 24948k reserved, 211968K highmem
  26. <5>[ 0.000000] Virtual kernel memory layout:
  27. <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  28. <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  29. <5>[ 0.000000] DMA : 0xfee00000 - 0xffe00000 ( 16 MB)
  30. <5>[ 0.000000] vmalloc : 0xe3800000 - 0xf7800000 ( 320 MB)
  31. <5>[ 0.000000] lowmem : 0xc0000000 - 0xe3000000 ( 560 MB)
  32. <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  33. <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  34. <5>[ 0.000000] .init : 0xc0008000 - 0xc0505000 (5108 kB)
  35. <5>[ 0.000000] .text : 0xc0505000 - 0xc0bc5000 (6912 kB)
  36. <5>[ 0.000000] .data : 0xc0bf6000 - 0xc0c5d780 ( 414 kB)
  37. <6>[ 0.000000] Hierarchical RCU implementation.
  38. <6>[ 0.000000] RCU-based detection of stalled CPUs is disabled.
  39. <6>[ 0.000000] Verbose stalled-CPUs detection is disabled.
  40. <6>[ 0.000000] NR_IRQS:620
  41. <6>[ 0.000000] PRCMU firmware version 3.5.0
  42. <4>[ 0.000000] arm_pm_restart: 0xc051df00, ux500_restart: 0xc051df00
  43. <6>[ 0.000000] Console: colour dummy device 80x30
  44. <6>[ 7.619934] Calibrating delay using timer specific routine.. 4.80 BogoMIPS (lpj=24014)
  45. <6>[ 7.619964] pid_max: default: 32768 minimum: 301
  46. <4>[ 7.620269] Mount-cache hash table entries: 512
  47. <6>[ 7.620605] Initializing cgroup subsys cpuacct
  48. <5>[ 7.620697] [LOG] start_kernel() log_buf_base = 0xe3a00000, size=217055232
  49. <6>[ 7.620697] CPU: Testing write buffer coherency: ok
  50. <6>[ 7.620849] Calibrating local timer... 499.01MHz.
  51. <6>[ 7.679992] L310 cache controller enabled
  52. <6>[ 7.679992] l2x0: 8 ways, CACHE_ID 0x410000c5, AUX_CTRL 0x7ec60800
  53. <4>[ 7.690032] >made stopper
  54. <4>[ 7.710174] >made stopper
  55. <4>[ 7.730651] CPU1: Booted secondary processor
  56. <6>[ 7.730712] Brought up 2 CPUs
  57. <6>[ 7.730712] SMP: Total of 2 processors activated (9.60 BogoMIPS).
  58. <6>[ 7.734832] xor: measuring software checksum speed
  59. <6>[ 7.780120] arm4regs : 1389.200 MB/sec
  60. <6>[ 7.830200] 8regs : 1080.000 MB/sec
  61. <6>[ 7.880310] 32regs : 1126.400 MB/sec
  62. <6>[ 7.880310] xor: using function: arm4regs (1389.200 MB/sec)
  63. <6>[ 7.880340] regulator: core version 0.5
  64. <6>[ 7.880645] NET: Registered protocol family 16
  65. <6>[ 7.882690] ram_console: got buffer at 18000000, size 100000
  66. <6>[ 7.882751] ram_console: found existing buffer, size 48836, start 48836
  67. <6>[ 7.883209] console [ram-1] enabled
  68. <6>[ 7.883361] DB8500: process: 00, revision ID: 0xb2
  69. <6>[ 7.883361] DB8500: version 2.2
  70. <6>[ 7.884002] gpio gpio.0: Bits 0-31 at address f812e000
  71. <6>[ 7.884338] gpio gpio.1: Bits 32-63 at address f812e080
  72. <6>[ 7.884704] gpio gpio.2: Bits 64-95 at address f800e000
  73. <6>[ 7.884979] gpio gpio.3: Bits 96-127 at address f800e080
  74. <6>[ 7.885345] gpio gpio.4: Bits 128-159 at address f800e100
  75. <6>[ 7.885650] gpio gpio.5: Bits 160-191 at address f800e180
  76. <6>[ 7.885986] gpio gpio.6: Bits 192-223 at address f811e000
  77. <6>[ 7.886291] gpio gpio.7: Bits 224-255 at address f811e080
  78. <6>[ 7.886627] gpio gpio.8: Bits 256-287 at address fa3fe000
  79. <6>[ 7.890838] janice_i2c_init
  80. <6>[ 7.893280] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
  81. <6>[ 7.893341] startup_graphics detected => Set regulator B2R2_MCDE enabled
  82. <6>[ 7.893524] regulator: u8500-vape: 1800 <--> 2000 mV normal idle
  83. <6>[ 7.893676] regulator: u8500-varm:
  84. <6>[ 7.893829] regulator: u8500-vmodem:
  85. <6>[ 7.893981] regulator: u8500-vpll:
  86. <6>[ 7.894134] regulator: u8500-vsmps1:
  87. <6>[ 7.894287] regulator: u8500-vsmps2:
  88. <6>[ 7.894439] regulator: u8500-vsmps3:
  89. <6>[ 7.894561] regulator: u8500-vrf1:
  90. <6>[ 7.894714] regulator: u8500-sva-mmdsp:
  91. <6>[ 7.894866] regulator: u8500-sva-mmdsp-ret:
  92. <6>[ 7.895019] regulator: u8500-sva-pipe:
  93. <6>[ 7.895172] regulator: u8500-sia-mmdsp:
  94. <6>[ 7.895355] regulator: u8500-sia-mmdsp-ret:
  95. <6>[ 7.895507] regulator: u8500-sia-pipe:
  96. <6>[ 7.895660] regulator: u8500-sga:
  97. <6>[ 7.895843] regulator: u8500-b2r2-mcde:
  98. <6>[ 7.895996] regulator: u8500-esram12:
  99. <6>[ 7.896179] regulator: u8500-esram12-ret:
  100. <6>[ 7.896331] regulator: u8500-esram34:
  101. <6>[ 7.896484] regulator: u8500-esram34-ret:
  102. <6>[ 7.896881] dbx500_dump: driver initialized
  103. <6>[ 7.897064] Serial: AMBA PL011 UART driver
  104. <6>[ 7.897125] uart-pl011 uart0: managed by runtime pm: pins
  105. <6>[ 7.897216] uart0: ttyAMA0 at MMIO 0x80120000 (irq = 43) is a AMBA/PL011
  106. <6>[ 7.897460] uart1: ttyAMA1 at MMIO 0x80121000 (irq = 51) is a AMBA/PL011
  107. <6>[ 7.897674] uart2: ttyAMA2 at MMIO 0x80007000 (irq = 58) is a AMBA/PL011
  108. <6>[ 7.898040] ab8500-i2c ab8500-i2c.0: detected chip, revision: 0x33
  109. <6>[ 7.898071] ab8500-i2c ab8500-i2c.0: switch off status: 0x1bio: create slab <bio-0> at 0
  110. <6>[ 7.933471] regulator: ab8500-vaux1: at 3000 mV normal idle
  111. <6>[ 7.933715] regulator: ab8500-vaux2: at 1800 mV normal idle
  112. <6>[ 7.933929] regulator: ab8500-vaux3: 1200 <--> 2910 mV at 2910 mV normal idle
  113. <6>[ 7.934143] regulator: ab8500-vintcore: 1250 <--> 1350 mV at 1250 mV normal idle
  114. <7>[ 7.934326] machine_constraints_voltage: override 'ab8500-vtvout' min_uV, 1 -> 2000000
  115. <7>[ 7.934326] machine_constraints_voltage: override 'ab8500-vtvout' max_uV, 2147483647 -> 2000000
  116. <6>[ 7.934356] regulator: ab8500-vtvout: 2000 mV
  117. <7>[ 7.934509] machine_constraints_voltage: override 'ab8500-vaudio' min_uV, 1 -> 2000000
  118. <7>[ 7.934539] machine_constraints_voltage: override 'ab8500-vaudio' max_uV, 2147483647 -> 2000000
  119. <6>[ 7.934539] regulator: ab8500-vaudio: 2000 mV
  120. <7>[ 7.934692] machine_constraints_voltage: override 'ab8500-vamic1' min_uV, 1 -> 2050000
  121. <7>[ 7.934722] machine_constraints_voltage: override 'ab8500-vamic1' max_uV, 2147483647 -> 2050000
  122. <6>[ 7.934722] regulator: ab8500-vamic1: 2050 mV
  123. <7>[ 7.934875] machine_constraints_voltage: override 'ab8500-vamic2' min_uV, 1 -> 2050000
  124. <7>[ 7.934906] machine_constraints_voltage: override 'ab8500-vamic2' max_uV, 2147483647 -> 2050000
  125. <6>[ 7.934906] regulator: ab8500-vamic2: 2050 mV
  126. <7>[ 7.935058] machine_constraints_voltage: override 'ab8500-vdmic' min_uV, 1 -> 1800000
  127. <7>[ 7.935089] machine_constraints_voltage: override 'ab8500-vdmic' max_uV, 2147483647 -> 1800000
  128. <6>[ 7.935089] regulator: ab8500-vdmic: 1800 mV
  129. <7>[ 7.935272] machine_constraints_voltage: override 'ab8500-vana' min_uV, 1 -> 1200000
  130. <7>[ 7.935272] machine_constraints_voltage: override 'ab8500-vana' max_uV, 2147483647 -> 1200000
  131. <6>[ 7.935302] regulator: ab8500-vana: 1200 mV
  132. <7>[ 7.937133] ab8500-regulator-debug ab8500-regulator-debug.0: Board profile is 0x00
  133. <6>[ 7.937805] hwmem hwmem.0: Probed OK
  134. <5>[ 7.939147] SCSI subsystem initialized
  135. <6>[ 7.939605] usbcore: registered new interface driver usbfs
  136. <6>[ 7.939849] usbcore: registered new interface driver hub
  137. <6>[ 7.940002] usbcore: registered new device driver usb
  138. <6>[ 7.941925] i2c-gpio i2c-gpio.4: using pins 144 (SDA) and 143 (SCL)
  139. <6>[ 7.942230] i2c-gpio i2c-gpio.5: using pins 197 (SDA) and 196 (SCL)
  140. <6>[ 7.942535] i2c-gpio i2c-gpio.6: using pins 202 (SDA) and 201 (SCL)
  141. <6>[ 7.942718] i2c-gpio i2c-gpio.7: using pins 152 (SDA) and 151 (SCL)
  142. <6>[ 7.943023] i2c-gpio i2c-gpio.8: using pins 10 (SDA) and 11 (SCL)
  143. <6>[ 7.943206] nmk-i2c nmk-i2c.0: managed by runtime pm: pins
  144. <6>[ 7.943634] nmk-i2c nmk-i2c.1: managed by runtime pm: pins
  145. <6>[ 7.944000] nmk-i2c nmk-i2c.2: managed by runtime pm: pins
  146. <6>[ 7.944244] nmk-i2c nmk-i2c.3: managed by runtime pm: pins
  147. <4>[ 8.111175] raid6: int32x1 104 MB/s
  148. <4>[ 8.281433] raid6: int32x2 131 MB/s
  149. <4>[ 8.451477] raid6: int32x4 162 MB/s
  150. <4>[ 8.621887] raid6: int32x8 153 MB/s
  151. <4>[ 8.621887] raid6: using algorithm int32x4 (162 MB/s)
  152. <6>[ 8.622558] [SENSORS CORE] sensors_class_init
  153. <6>[ 8.622711] dma40 dma40.0: managed by runtime pm: regulator
  154. <6>[ 8.622772] dma40 dma40.0: hardware revision: 3 @ 0x801c0000
  155. <6>[ 8.622863] dma40 dma40.0: 6 of 8 physical DMA channels available
  156. <6>[ 8.622863] dma40 dma40.0: [d40_phy_res_init] INFO: channel 4 is misconfigured (0)
  157. <6>[ 8.622894] dma40 dma40.0: [d40_phy_res_init] INFO: channel 5 is misconfigured (0)
  158. <6>[ 8.622894] dma40 dma40.0: [d40_phy_res_init] INFO: channel 6 is misconfigured (0)
  159. <6>[ 8.630432] dma40 dma40.0: initialized
  160. <4>[ 8.631103] exitering ab8500_get_startup_reason found name POWER_ON_KEY_1
  161. <4>[ 8.631103]
  162. <6>[ 8.631500] Advanced Linux Sound Architecture Driver Version 1.0.23.
  163. <6>[ 8.632354] Bluetooth: Core ver 2.15
  164. <6>[ 8.632507] NET: Registered protocol family 31
  165. <6>[ 8.632507] Bluetooth: HCI device and connection manager initialized
  166. <6>[ 8.632537] Bluetooth: HCI socket layer initialized
  167. <6>[ 8.732635] Filled curr sampe: 0, pre_sample : 0
  168. <6>[ 8.831909] ab8500-btemp ab8500-btemp.0: Battery detected on BATTEMP low 0 < res 1818 < high: 10200 index: 1
  169. <6>[ 8.932037] ab8500_btemp_measure_temp: adc(192), temp(30)
  170. <6>[ 8.992370] Added curr sample: 237, diff:237, average: 0, high_diff_nbr: 1
  171. <6>[ 8.992401] [TuningData] 0 4043 3999 237 189
  172. <6>[ 8.992401] Filled vcap: 1249500
  173. <6>[ 8.992523] ab8500-fg ab8500-fg.0: CC_CONF_REG : 3
  174. <6>[ 8.992523] ab8500-fg ab8500-fg.0: Calibration ongoing...
  175. <6>[ 8.992706] [FG_DATA] 1249mAh/1500mAh 83% (Prev 1249mAh 83%) 3999mV 705 705 237mA 0mA 0 1 0 0 0 0 0 121 0 0 0 0 0 0 1818 2457 2297054 570 0 0 0
  176. <6>[ 9.012969] init_wifi_mem: WIFI MEM Allocated
  177. <6>[ 9.013000] Switching to clocksource db8500-prcmu-timer4
  178. <6>[ 9.018371] MCDE subsystem init begin
  179. <6>[ 9.018493] mcde mcde: MCDE iomap: 0xA0350000->0xE38A8000
  180. <6>[ 9.018524] mcde mcde: MCDE DSI0 iomap: 0xA0351000->0xE38AC000
  181. <6>[ 9.018554] mcde mcde: MCDE DSI1 iomap: 0xA0352000->0xE38B0000
  182. <6>[ 9.018585] mcde mcde: MCDE DSI2 iomap: 0xA0353000->0xE38B4000
  183. <6>[ 9.022216] Switched to NOHz mode on CPU #0
  184. <6>[ 9.022277] mcde mcde: MCDE HW revision 3.0.8.0
  185. <6>[ 9.022277] mcde mcde: V2 HW
  186. <6>[ 9.022827] Switched to NOHz mode on CPU #1
  187. <6>[ 9.023223] MCDE subsystem init done
  188. <6>[ 9.053222] ab8500-btemp ab8500-btemp.0: Battery detected on BATTEMP low 0 < res 1678 < high: 10200 index: 1
  189. <6>[ 9.053405] NET: Registered protocol family 2
  190. <6>[ 9.053619] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
  191. <6>[ 9.054351] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  192. <6>[ 9.055114] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  193. <6>[ 9.055969] TCP: Hash tables configured (established 65536 bind 65536)
  194. <6>[ 9.055969] TCP reno registered
  195. <6>[ 9.055999] UDP hash table entries: 256 (order: 1, 8192 bytes)
  196. <6>[ 9.056030] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  197. <6>[ 9.056274] NET: Registered protocol family 1
  198. <6>[ 9.086395] PMU: registered new PMU device of type 0
  199. <6>[ 9.086700] Use-case governor initialized
  200. <3>[ 9.086791] prcmu qos: get cpufreq policy failed (cpu0)
  201. <3>[ 9.086791] prcmu qos: get cpufreq policy failed (cpu1)
  202. <6>[ 9.086822] u8500-cpufreq : Available frequencies:
  203. <6>[ 9.086822] 200 Mhz
  204. <6>[ 9.086853] 400 Mhz
  205. <6>[ 9.086853] 800 Mhz
  206. <6>[ 9.086853] 1000 Mhz
  207. <6>[ 9.086883] cpufreq for u8500 started
  208. <6>[ 9.086944] DVFS Governor Policy set to - ondemand
  209. <6>[ 9.087615] ux500-product: JTAG is enabled
  210. <6>[ 9.088348] [BT] Device Powering ON
  211. <6>[ 9.088378] [BT] BT_RST_N_GTI9060_R0_1 = 1
  212. <6>[ 9.088378] [BT] BT_VREG_EN_GTI9060_R0_1 = 1
  213. <6>[ 9.088500] [BT] Device Powering OFF
  214. <6>[ 9.104522] [BT] BT_RST_N_GTI9060_R0_1 = 0
  215. <6>[ 9.104583] [BT] BT_VREG_EN_GTI9060_R0_1 = 0
  216. <4>[ 9.106018] NetWinder Floating Point Emulator V0.97 (double precision)
  217. <4>[ 9.121643] highmem bounce pool size: 64 pages
  218. <6>[ 9.122772] ashmem: initialized
  219. <5>[ 9.124450] VFS: Disk quotas dquot_6.5.2
  220. <4>[ 9.125030] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  221. <6>[ 9.128570] Installing v9fs 9p2000 file system support
  222. <6>[ 9.128692] msgmni has been set to 685
  223. <6>[ 9.137847] alg: No test for stdrng (krng)
  224. <6>[ 9.138000] async_tx: api initialized (async)
  225. <6>[ 9.138183] io scheduler noop registered (default)
  226. <6>[ 9.138275] io scheduler deadline registered
  227. <6>[ 9.138580] io scheduler cfq registered
  228. <6>[ 9.139678] pri_lcd_s6e63m0 pri_lcd_s6e63m0.0: Invoked s6e63m0_mcde_panel_probe
  229. <6>[ 9.141540] pri_lcd_s6e63m0 pri_lcd_s6e63m0.0: DPI display probed
  230. <6>[ 9.148376] pri_lcd_s6e63m0 pri_lcd_s6e63m0.0: Framebuffer created (pri_lcd_s6e63m0)
  231. <6>[ 9.148468] init_dispdev: name=disp0 w=480, h=800, fmt=0, stride=960
  232. <6>[ 9.149139] pri_lcd_s6e63m0 pri_lcd_s6e63m0.0: Disp dev created for (pri_lcd_s6e63m0)
  233. <6>[ 9.149688] b2r2_init
  234. <6>[ 9.160461] B2R2_MEM: Creating heap for size 16384 bytes
  235. <4>[ 9.165008] Mali<2>:
  236. <4>[ 9.165039] Mali<2>: Inserting Mali v8 device driver.
  237. <4>[ 9.165039] Mali<2>: Compiled: Aug 4 2012, time: 22:26:42.
  238. <4>[ 9.165069] Mali<2>: Svn revision: r2p2-03rel0
  239. <4>[ 9.165069] Mali<2>: MMU memory system initializing
  240. <4>[ 9.165100] Mali<2>: Rendercore: subsystem global mutex initialized
  241. <4>[ 9.165130] Mali<2>: Core: subsystem_init: Mali-400 PP
  242. <4>[ 9.165130] Mali<2>: Core: subsystem_init: Mali-400 GP
  243. <4>[ 9.165161] Mali<2>: Mali L2 cache system initializing
  244. <4>[ 9.165161] Mali<1>: Overriding arch resource[4] :
  245. <4>[ 9.165191] Mali<1>: Type: MEMORY, base: 8000000, size 2000000
  246. <4>[ 9.165496] Mali<2>: MMU registered
  247. <4>[ 9.165527] Mali<2>: MMU registered
  248. <4>[ 9.165557] Mali<2>: Mali OS memory allocator created with max allocation size of 0x40000000 bytes, cpu_usage_adjust 0x00000000
  249. <4>[ 9.165588] Mali<2>: Memory Validator 'Framebuffer' installed for Mali physical address base==0x00000000, size==0x7FF00000, cpu_adjust==0x00000000
  250. <4>[ 9.165588] Mali<2>: Creating Mali L2 cache: Mali-400 L2 cache
  251. <4>[ 9.165618] Mali<1>: Mali memory allocators will be used in this order of preference (lowest numbered first) :
  252. <4>[ 9.165649] Mali<1>: 0: Mali SDRAM
  253. <4>[ 9.165649] Mali<1>: 5: Linux kernel memory
  254. <4>[ 9.166656] Mali<2>: Attach mmu: 0xe297e740 to core: Mali-400 PP in subsystem: Mali-400 PP
  255. <4>[ 9.166656] Mali<2>: Attach mmu: 0xe297e7a0 to core: Mali-400 GP in subsystem: Mali-400 GP
  256. <4>[ 9.166687] Mali<2>: Mali L2 cache system load complete
  257. <4>[ 9.166717] Mali: Mali device driver r2p2-03rel0 loaded
  258. <6>[ 9.173889] brd: module loaded
  259. <6>[ 9.177734] loop: module loaded
  260. <6>[ 9.177825] pmem_hwb: 1 init
  261. <4>[ 9.178253] android_pmem: probe of android_pmem.2 failed with error -1
  262. <6>[ 9.182281] u8500_shrm shrm_bus: IPC_ISA BOOT_INIT
  263. <6>[ 9.247406] u8500_shrm shrm_bus: BOOT_INFO_SYNC
  264. <6>[ 9.247802] u8500_shrm shrm_bus: IPC_ISA BOOT_DONE
  265. <6>[ 9.248352] dbx500_mloader_fw dbx500_mloader_fw: mloader device register
  266. <6>[ 9.249542] dispdev_init
  267. <3>[ 9.249603] immvibe_init
  268. <3>[ 9.249816] immvibe_setup(), Vibrator gpio's are configured.
  269. <6>[ 9.250732] input: Vibrator as /devices/virtual/input/input0
  270. <6>[ 9.256530] pri_lcd_spi spi6.0: panel s6e63m0 spi being probed
  271. <6>[ 9.256927] pri_lcd_spi spi6.0: s6e63m0 spi has been probed.
  272. <4>[ 9.257995] s6e63mo_mtp_from_boot main_mtp_data[0] : 00
  273. <4>[ 9.258026] s6e63mo_mtp_from_boot main_mtp_data[1] : 00
  274. <4>[ 9.258087] s6e63mo_mtp_from_boot main_mtp_data[2] : 00
  275. <4>[ 9.258117] s6e63mo_mtp_from_boot main_mtp_data[3] : 02
  276. <4>[ 9.258178] s6e63mo_mtp_from_boot main_mtp_data[4] : f1
  277. <4>[ 9.258209] s6e63mo_mtp_from_boot main_mtp_data[5] : 00
  278. <4>[ 9.258270] s6e63mo_mtp_from_boot main_mtp_data[6] : 09
  279. <4>[ 9.258300] s6e63mo_mtp_from_boot main_mtp_data[7] : 00
  280. <4>[ 9.258361] s6e63mo_mtp_from_boot main_mtp_data[8] : 00
  281. <4>[ 9.258392] s6e63mo_mtp_from_boot main_mtp_data[9] : 00
  282. <4>[ 9.258422] s6e63mo_mtp_from_boot main_mtp_data[10] : fd
  283. <4>[ 9.258483] s6e63mo_mtp_from_boot main_mtp_data[11] : f2
  284. <4>[ 9.258514] s6e63mo_mtp_from_boot main_mtp_data[12] : 00
  285. <4>[ 9.258575] s6e63mo_mtp_from_boot main_mtp_data[13] : 10
  286. <4>[ 9.258605] s6e63mo_mtp_from_boot main_mtp_data[14] : 00
  287. <4>[ 9.258666] s6e63mo_mtp_from_boot main_mtp_data[15] : 00
  288. <4>[ 9.258697] s6e63mo_mtp_from_boot main_mtp_data[16] : fa
  289. <4>[ 9.258758] s6e63mo_mtp_from_boot main_mtp_data[17] : 00
  290. <4>[ 9.258789] s6e63mo_mtp_from_boot main_mtp_data[18] : ef
  291. <4>[ 9.258850] s6e63mo_mtp_from_boot main_mtp_data[19] : 00
  292. <4>[ 9.258880] s6e63mo_mtp_from_boot main_mtp_data[20] : 14
  293. <4>[ 9.259796] Generate_gray_scale end
  294. <6>[ 9.260467] PPP generic driver version 2.4.2
  295. <6>[ 9.261718] PPP Deflate Compression module registered
  296. <6>[ 9.261810] PPP BSD Compression module registered
  297. <6>[ 9.264404] PPP MPPE Compression module registered
  298. <6>[ 9.264495] NET: Registered protocol family 24
  299. <6>[ 9.271087] tun: Universal TUN/TAP device driver, 1.6
  300. <6>[ 9.271148] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  301. <6>[ 9.273712] usbcore: registered new interface driver cdc_acm
  302. <6>[ 9.273773] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
  303. <6>[ 9.273864] Initializing USB Mass Storage driver...
  304. <6>[ 9.274414] usbcore: registered new interface driver usb-storage
  305. <6>[ 9.274475] USB Mass Storage support registered.
  306. <6>[ 9.275054] usbcore: registered new interface driver libusual
  307. <6>[ 9.275146] musb_hdrc: version 6.0, pio, otg (peripheral+host), debug=0
  308. <7>[ 9.279602] musb_hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
  309. <7>[ 9.279693] musb_hdrc: MHDRC RTL version 2.0
  310. <7>[ 9.279754] musb_hdrc: setup fifo_mode 5
  311. <7>[ 9.279815] musb_hdrc: 28/31 max ep, 9216/262144 memory
  312. <6>[ 9.280242] musb_hdrc musb_hdrc.0: USB OTG mode controller at e3b60000 using PIO, IRQ 55
  313. <6>[ 9.280914] android init
  314. <6>[ 9.280975] [usb] init:1132 android init pid=0x685e
  315. <6>[ 9.281188] android_probe pdata: c0c109e8
  316. <6>[ 9.281250] [usb] android_probe:1068 vid=0x4e8,pid=0x685e,ver=0x100,product_name=SAMSUNG_Android,manufacturer_name=SAMSUNG,serial=D5BF66358AF790AAA7320B4527DA12B
  317. <6>[ 9.281799] android_bind
  318. <7>[ 9.281860] android_bind_config
  319. <6>[ 9.281921] [usb] android_bind:449 bind pid=0x6860,vid=0x4e8,bcdDevice=0x400,serial=D5BF66358AF790AAA7320B4527DA12B
  320. <6>[ 9.282958] android_usb gadget: android_usb ready
  321. <6>[ 9.283020] musb_hdrc musb_hdrc.0: MUSB HDRC host driver
  322. <7>[ 9.283172] drivers/usb/core/inode.c: creating file 'devices'
  323. <7>[ 9.283264] drivers/usb/core/inode.c: creating file '001'
  324. <6>[ 9.284393] musb_hdrc musb_hdrc.0: new USB bus registered, assigned bus number 1
  325. <7>[ 9.284576] usb usb1: default language 0x0409
  326. <7>[ 9.284698] usb usb1: udev 1, busnum 1, minor = 0
  327. <6>[ 9.284759] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  328. <6>[ 9.284820] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  329. <6>[ 9.284851] usb usb1: Product: MUSB HDRC host driver
  330. <6>[ 9.284912] usb usb1: Manufacturer: Linux 2.6.35.7+ musb-hcd
  331. <6>[ 9.284942] usb usb1: SerialNumber: musb_hdrc.0
  332. <7>[ 9.286193] usb usb1: usb_probe_device
  333. <7>[ 9.286254] usb usb1: configuration #1 chosen from 1 choice
  334. <7>[ 9.286346] usb usb1: adding 1-0:1.0 (config #1, interface 0)
  335. <7>[ 9.287109] hub 1-0:1.0: usb_probe_interface
  336. <7>[ 9.287139] hub 1-0:1.0: usb_probe_interface - got id
  337. <6>[ 9.287200] hub 1-0:1.0: USB hub found
  338. <6>[ 9.287292] hub 1-0:1.0: 1 port detected
  339. <7>[ 9.287322] hub 1-0:1.0: standalone hub
  340. <7>[ 9.287384] hub 1-0:1.0: individual port power switching
  341. <7>[ 9.287414] hub 1-0:1.0: no over-current protection
  342. <7>[ 9.287445] hub 1-0:1.0: power on to power good time: 10ms
  343. <7>[ 9.287536] hub 1-0:1.0: local power source is good
  344. <7>[ 9.287567] hub 1-0:1.0: enabling power on all ports
  345. <7>[ 9.288482] drivers/usb/core/inode.c: creating file '001'
  346. <6>[ 9.289398] f_acm init
  347. <6>[ 9.289428] android_register_function acm
  348. <6>[ 9.289489] f_adb init
  349. <6>[ 9.289520] android_register_function adb
  350. <6>[ 9.289581] f_mass_storage init
  351. <6>[ 9.289825] fsg_probe pdev: c0c114a0, pdata: c0c11b20
  352. <6>[ 9.290344] android_register_function usb_mass_storage
  353. <6>[ 9.290435] f_mtp init
  354. <6>[ 9.290466] android_register_function mtp
  355. <6>[ 9.290557] f_rndis init
  356. <6>[ 9.291198] android_register_function rndis
  357. <6>[ 9.291290] android_register_function phonet
  358. <6>[ 9.291351] [f_mass_storage] fsg_common_init:2744 nluns=2
  359. <6>[ 9.291656] [f_mass_storage] fsg_common_init:2834 nluns=2
  360. <6>[ 9.291961] android_usb gadget: Mass Storage Function, version: 2009/09/11
  361. <6>[ 9.292022] android_usb gadget: Number of LUNs=2
  362. <6>[ 9.292053] lun0: LUN: removable file: (no medium)
  363. <6>[ 9.292114] lun1: LUN: removable file: (no medium)
  364. <6>[ 9.294219] DUN is registerd
  365. <6>[ 9.295013] adb_bind_config
  366. <4>[ 9.296966] android_usb gadget: using random self ethernet address
  367. <4>[ 9.297058] android_usb gadget: using random host ethernet address
  368. <7>[ 9.302337] [mtpg_function_bind] line = [976]
  369. <7>[ 9.302490] [mtpg_function_bind] dual speed line = [1051]
  370. <6>[ 9.304870] android_usb gadget: USB CDC Phonet function
  371. <6>[ 9.304901] android_usb gadget: using musb_hdrc, OUT ep5out, IN ep5in
  372. <6>[ 9.304901] [usb] samsung_enable_function:759 enable mode=0x1
  373. <6>[ 9.304931] [usb] samsung_enable_function:769 mode = USBSTATUS_SAMSUNG_KIES (0x1)
  374. <6>[ 9.305053] [usb] set_enable_functions:543 disable usb_mass_storage
  375. <6>[ 9.305145] [usb] set_enable_functions:536 enable acm
  376. <6>[ 9.305236] [usb] set_enable_functions:543 disable adb
  377. <6>[ 9.305358] [usb] set_enable_functions:543 disable rndis
  378. <6>[ 9.305450] [usb] set_enable_functions:536 enable mtp
  379. <6>[ 9.305572] [usb] set_enable_functions:543 disable phonet
  380. <6>[ 9.305572] [usb] set_product:583 Change Device Descriptor : DeviceClass(0xef),SubClass(0x2),Protocol(0x1)
  381. <6>[ 9.305603] [usb] set_product:584 Change Label : [1]ACM + MTP (SAMSUNG KIES mode)
  382. <6>[ 9.305603] [usb] samsung_enable_function:803 Save usb mode except tethering and askon (mode=1)
  383. <6>[ 9.305633] [usb] samsung_enable_function:815 dev->cdev=0xe2f0f860, dev->cdev->gadget=0xe29e5da0, dev->cdev->gadget->speed=0x0, mode=1
  384. <6>[ 9.305633] [usb] usb_composite_force_reset:198 skip reset
  385. <6>[ 9.305664] [usb] samsung_enable_function:818 finished setting pid=0x6860
  386. <6>[ 9.305664] [usb] android_register_function:485 Don't enable udc.
  387. <6>[ 9.306518] input: gpio-keys as /devices/platform/gpio-keys.0/input/input1
  388. <7>[ 9.306762] [KEY] key: home_key gpio_keys_report_event state = 0
  389. <7>[ 9.306793] [KEY] key: volup_key gpio_keys_report_event state = 0
  390. <7>[ 9.306793] [KEY] key: voldown_key gpio_keys_report_event state = 0
  391. <6>[ 9.307220] [TouchKey] Nextchip Touch Key init
  392. <6>[ 9.307495] input: sec_touchscreen as /devices/virtual/input/input2
  393. <6>[ 9.376403] mxt224_power_on is finished
  394. <6>[ 9.376983] mxt224_ts 3-004a: family = 0x81, variant = 0x1, version = 0x10, build = 170
  395. <7>[ 9.383544] hub 1-0:1.0: state 7 ports 1 chg 0000 evt 0000
  396. <6>[ 9.386566] mxt224_ts 3-004a: TSP chip is MXT224-E
  397. <3>[ 9.495697] [TSP] calibration success!!!
  398. <6>[ 9.497802] mxt224_ts 3-004a: vbus_state = 0
  399. <3>[ 9.503143] [TSP]TA_probe MXT224E T48 Byte7 is 98
  400. <6>[ 9.503204] [TSP] threshold : 40
  401. <6>[ 9.505065] mxt224_ts 3-004a: Calibration End!!!!!!
  402. <6>[ 9.505981] input: AB8500 POn(PowerOn) Key as /devices/platform/ab8500-i2c.0/ab8500-poweron-key.0/input/input3
  403. <6>[ 9.525390] using rtc device, ab8500-rtc, for alarms
  404. <6>[ 9.525512] ab8500-rtc ab8500-rtc.0: rtc core: registered ab8500-rtc as rtc0
  405. <6>[ 9.526580] i2c /dev entries driver
  406. <6>[ 9.535217] mxt224_ts 3-004a: Calibration!!!!!!
  407. <6>[ 9.535919] IR NEC protocol handler initialized
  408. <6>[ 9.536010] IR RC5(x) protocol handler initialized
  409. <6>[ 9.536071] IR RC6 protocol handler initialized
  410. <6>[ 9.536132] IR JVC protocol handler initialized
  411. <6>[ 9.536193] IR Sony protocol handler initialized
  412. <6>[ 9.536254] Linux video capture interface: v2.00
  413. <6>[ 9.538940] ab8500-fg ab8500-fg.0: CC_CONF_REG : 3
  414. <6>[ 9.538970] ab8500-fg ab8500-fg.0: Calibration WFI
  415. <6>[ 9.539215] [FG_DATA] 1249mAh/1500mAh 83% (Prev 1249mAh 83%) 4039mV 709 709 237mA 0mA 0 1 0 0 0 0 0 121 0 0 0 0 0 0 1678 2457 2297054 570 0 0 0
  416. <6>[ 9.540832] FSA USB Switch control register is 0xfe bootmode is 2
  417. <6>[ 9.543548] FSA initial event = 0x00000002
  418. <6>[ 9.546936] mxt224_ts 3-004a: Calibration End!!!!!!
  419. <6>[ 9.547851] mxt224_ts 3-004a: median filter ON!!!
  420. <6>[ 9.559020] ab8500-charger ab8500-charger.0: ab8500_charger_detect_chargers REG : 0x2, vbus_detect_charging : 0, usb_line_state : 0x1
  421. <6>[ 9.559112] ab8500-charger ab8500-charger.0: USB is inserted
  422. <6>[ 9.559143] ab8500-charger ab8500-charger.0: SW Fallback : 1
  423. <6>[ 9.561431] ab8500-fg ab8500-fg.0: CC_CONF_REG : 3
  424. <6>[ 9.561523] ab8500-fg ab8500-fg.0: Calibration WFI
  425. <6>[ 9.561859] [FG_DATA] 1249mAh/1500mAh 83% (Prev 1249mAh 83%) 4061mV 718 718 237mA 0mA 0 1 0 0 0 0 0 121 0 0 0 0 0 0 1678 2457 2297054 570 0 0 0
  426. <7>[ 9.564880] ab8500-chargalg ab8500-chargalg.0: Charging source is OFF
  427. <6>[ 9.564941] ab8500-chargalg ab8500-chargalg.0: State changed: NO (From state: [0] HANDHELD_INIT =to=> [0] HANDHELD_INIT )
  428. <6>[ 9.565032] ab8500-chargalg ab8500-chargalg.0: State changed: NO (From state: [0] HANDHELD_INIT =to=> [0] HANDHELD_INIT )
  429. <6>[ 9.572296] ab8500-charger ab8500-charger.0: register_charging_i2c_dev 709
  430. <6>[ 9.572784] ab8500-charger ab8500-charger.0: ab8500_charger_detect_chargers REG : 0x2, vbus_detect_charging : 0, usb_line_state : 0x1
  431. <6>[ 9.572875] ab8500-charger ab8500-charger.0: USB is inserted
  432. <6>[ 9.572906] ab8500-charger ab8500-charger.0: SW Fallback : 1
  433. <6>[ 9.585723] ab8500-fg ab8500-fg.0: CC_CONF_REG : 3
  434. <6>[ 9.585815] ab8500-fg ab8500-fg.0: Calibration WFI
  435. <6>[ 9.586273] [FG_DATA] 1249mAh/1500mAh 83% (Prev 1249mAh 83%) 4061mV 718 718 237mA 0mA 0 0 0 0 0 0 0 121 0 0 0 0 0 0 1678 2457 2297054 570 0 0 0
  436. <6>[ 9.587493] mpcore_wdt: rate for core 0 is 100.00MHz.
  437. <6>[ 9.587554] mpcore_wdt: rate for core 1 is 100.00MHz.
  438. <6>[ 9.587615] MPcore Watchdog Timer: 0.1. mpcore_noboot=0 mpcore_margin=359 sec (nowayout= 0)
  439. <6>[ 9.589691] md: raid1 personality registered for level 1
  440. <6>[ 9.589782] md: raid6 personality registered for level 6
  441. <6>[ 9.589843] md: raid5 personality registered for level 5
  442. <6>[ 9.589874] md: raid4 personality registered for level 4
  443. <6>[ 9.589965] md: multipath personality registered for level -4
  444. <6>[ 9.592132] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
  445. <6>[ 9.593414] device-mapper: multipath: version 1.1.1 loaded
  446. <6>[ 9.593505] device-mapper: multipath round-robin: version 1.0.0 loaded
  447. <6>[ 9.593597] device-mapper: multipath queue-length: version 0.1.0 loaded
  448. <6>[ 9.593688] device-mapper: multipath service-time: version 0.2.0 loaded
  449. <6>[ 9.594726] DVFS Governor Policy set to - ondemand
  450. <6>[ 9.594879] DVFS Governor Policy set to - ondemand
  451. <7>[ 9.598480] ab8500-chargalg ab8500-chargalg.0: Charging source is USB
  452. <6>[ 9.598541] ab8500-chargalg ab8500-chargalg.0: State changed: YES (From state: [0] HANDHELD_INIT =to=> [6] NORMAL_INIT )
  453. <6>[ 9.598602] Charging is started by USB Type charger
  454. <6>[ 9.598846] ab8500-charger ab8500-charger.0: ab8500_charger_detect_chargers REG : 0x2, vbus_detect_charging : 0, usb_line_state : 0x1
  455. <6>[ 9.598937] ab8500-charger ab8500-charger.0: USB is inserted
  456. <6>[ 9.598999] ab8500-charger ab8500-charger.0: SW Fallback : 1
  457. <6>[ 9.599487] ab8500-charger ab8500-charger.0: Enable USB: 4200mV 500mA
  458. <6>[ 9.599792] ab8500-charger ab8500-charger.0: ab8500_charger_set_main_in_curr Setting input current limit to 0x00 current=0
  459. <6>[ 9.600189] ab8500-chargalg ab8500-chargalg.0: State changed: YES (From state: [6] NORMAL_INIT =to=> [7] NORMAL )
  460. <6>[ 9.616333] cpuidle: using governor ladder
  461. <6>[ 9.616424] cpuidle: using governor menu
  462. <6>[ 9.617767] mmci-pl18x sdi2: use DMA channels DMA RX dma0chan0, DMA TX dma0chan1
  463. <3>[ 9.618774] [MMC] TURN ON EXTERNAL LDO
  464. <6>[ 9.618865] mmci-pl18x sdi2: mmc0: MMCI/PL180 manf 80 rev 4 cfg 00 at 0x0000000080005000
  465. <6>[ 9.618927] mmci-pl18x sdi2: IRQ 73, -1 (pio)
  466. <6>[ 9.619689] mmci-pl18x sdi0: use DMA channels DMA RX dma0chan2, DMA TX dma0chan3
  467. <6>[ 9.620910] mmci-pl18x sdi0: mmc1: MMCI/PL180 manf 80 rev 4 cfg 00 at 0x0000000080126000
  468. <6>[ 9.621032] mmci-pl18x sdi0: IRQ 92, -1 (pio)
  469. <6>[ 9.621582] mmci-pl18x sdi1: use DMA channels DMA RX dma0chan4, DMA TX dma0chan5
  470. <6>[ 9.622436] mmci-pl18x sdi1: mmc2: MMCI/PL180 manf 80 rev 4 cfg 00 at 0x0000000080118000
  471. <6>[ 9.622497] mmci-pl18x sdi1: IRQ 82, -1 (pio)
  472. <6>[ 9.623870] Workqueue Settings complete
  473. <6>[ 9.625366] input: proximity_sensor as /devices/virtual/input/input4
  474. <6>[ 9.628906] ab8500-charger ab8500-charger.0: ab8500_charger_set_main_in_curr Setting input current limit to 0x04 current=500
  475. <6>[ 9.629547] input: light_sensor as /devices/virtual/input/input5
  476. <6>[ 9.631195] [gp2a_opt_probe] CONFIG_GP2A_MODE_B INIT
  477. <6>[ 9.631591] ab8500-fg ab8500-fg.0: CC_CONF_REG : 3
  478. <6>[ 9.631652] ab8500-fg ab8500-fg.0: Calibration WFI
  479. <6>[ 9.631927] [FG_DATA] 1249mAh/1500mAh 83% (Prev 1249mAh 83%) 3992mV 690 690 237mA 0mA 0 7 1 0 0 0 0 121 0 0 0 0 0 0 1678 2457 2297054 570 0 0 0
  480. <6>[ 9.632080] ab8500-fg ab8500-fg.0: CC_CONF_REG : 3
  481. <6>[ 9.632141] ab8500-fg ab8500-fg.0: Calibration WFI
  482. <6>[ 9.632385] [FG_DATA] 1249mAh/1500mAh 83% (Prev 1249mAh 83%) 3992mV 690 690 237mA 0mA 0 7 1 0 0 0 0 121 0 0 0 0 0 0 1678 2457 2297054 570 0 0 0
  483. <6>[ 9.633117] [gp2a_opt_probe] gp2a_original_image:8
  484. <6>[ 9.633850] [gp2a_opt_probe] gp2a_original_image:40
  485. <6>[ 9.635040] [gp2a_opt_probe] gp2a_original_image:4
  486. <6>[ 9.635620] [gp2a_opt_probe] gp2a_original_image:3
  487. <6>[ 9.636077] INT Settings complete
  488. <6>[ 9.640106] ab8500-fg ab8500-fg.0: CC_CONF_REG : 3
  489. <6>[ 9.640197] ab8500-fg ab8500-fg.0: Calibration WFI
  490. <6>[ 9.642395] [FG_DATA] 1249mAh/1500mAh 83% (Prev 1249mAh 83%) 4058mV 717 717 237mA 0mA 0 7 1 0 0 0 0 121 0 0 0 0 0 0 1678 2457 2297054 570 0 0 0
  491. <6>[ 9.642456] geomagnetic_init
  492. <6>[ 9.642669] geomagnetic_probe
  493. <6>[ 9.644897] input: geomagnetic as /devices/platform/i2c-gpio.4/i2c-4/4-002e/input/input6
  494. <6>[ 9.645751] input: geomagnetic_raw as /devices/platform/i2c-gpio.4/i2c-4/4-002e/input/input7
  495. <6>[ 9.647247] input: orientation as /devices/virtual/input/input8
  496. <6>[ 9.647766] [mpu3050] mpu3050_probe,1538
  497. <6>[ 9.650634] ab8500-charger ab8500-charger.0: ab8500_charger_usb_state_changed usb_state: 0x03 mA: 0
  498. <6>[ 9.653320] ab8500-fg ab8500-fg.0: CC_CONF_REG : 3
  499. <6>[ 9.653320] ab8500-fg ab8500-fg.0: Calibration WFI
  500. <6>[ 9.653411] [FG_DATA] 1249mAh/1500mAh 83% (Prev 1249mAh 83%) 4058mV 717 717 237mA 0mA 0 7 1 0 0 0 0 121 0 0 0 0 0 0 1678 2457 2297054 570 0 0 0
  501. <3>[ 9.654388] mmc0: [MMC] CMD TIMEOUT STATUS: 4, CMD: 52
  502. <3>[ 9.654724] mmc0: [MMC] CMD TIMEOUT STATUS: 4, CMD: 52
  503. <3>[ 9.658142] mmc0: [MMC] CMD TIMEOUT STATUS: 4, CMD: 8
  504. <3>[ 9.658477] mmc0: [MMC] CMD TIMEOUT STATUS: 4, CMD: 5
  505. <3>[ 9.658782] mmc0: [MMC] CMD TIMEOUT STATUS: 4, CMD: 5
  506. <3>[ 9.659088] mmc0: [MMC] CMD TIMEOUT STATUS: 4, CMD: 5
  507. <3>[ 9.659393] mmc0: [MMC] CMD TIMEOUT STATUS: 4, CMD: 5
  508. <3>[ 9.659729] mmc0: [MMC] CMD TIMEOUT STATUS: 4, CMD: 55
  509. <3>[ 9.660064] mmc0: [MMC] CMD TIMEOUT STATUS: 4, CMD: 55
  510. <3>[ 9.660400] mmc0: [MMC] CMD TIMEOUT STATUS: 4, CMD: 55
  511. <3>[ 9.660705] mmc0: [MMC] CMD TIMEOUT STATUS: 4, CMD: 55
  512. <6>[ 9.761627] mmc0: new high speed MMC card at address 0001
  513. <6>[ 9.762115] mmcblk0: mmc0:0001 SEM08G 7.28 GiB
  514. <6>[ 9.762573] mmcblk0: p1 (P) p2 (M) p3 (S) p4 (C) p5 (D) p6 (C) p7 (E) p8 (U) p9 (H) p10 (P) p11 (F) p12 (I) p13 (M) p14 (S) p15 (K) p16 (S) p17 (K)
  515. <6>[ 9.775726] ab8500-charger ab8500-charger.0: ab8500_charger_usb_state_changed usb_state: 0x00 mA: 0
  516. <6>[ 9.775756] ab8500-charger ab8500-charger.0: ab8500_charger_usb_state_changed usb_state: 0x02 mA: 8
  517. <6>[ 9.823120] i2c i2c-8: mpu3050: +bma222
  518. <4>[ 9.823120] i2c i2c-8: WARNING: Accel irq not assigned
  519. <4>[ 9.823150] i2c i2c-8: mpu3050: No Compass Present
  520. <4>[ 9.823150] i2c i2c-8: mpu3050: No Pressure Present
  521. <4>[ 9.823455] mldl_cfg:Reset MPU3050
  522. <6>[ 9.826446] ab8500-charger ab8500-charger.0: USB Type - 0x01 MaxCurr: 0
  523. <6>[ 9.829040] i2c i2c-8: Installing irq using 386
  524. <6>[ 9.829040] i2c i2c-8: Module Param interface = mpuirq
  525. <6>[ 9.829803] input: mpu-accel as /devices/virtual/input/input9
  526. <6>[ 9.830291] ab8500-fg ab8500-fg.0: CC_CONF_REG : 3
  527. <6>[ 9.830322] ab8500-fg ab8500-fg.0: Calibration WFI
  528. <7>[ 9.830413] mpu_init
  529. <6>[ 9.830841] [FG_DATA] 1249mAh/1500mAh 83% (Prev 1249mAh 83%) 4056mV 716 716 237mA 0mA 0 7 1 0 0 0 0 121 0 0 0 0 0 0 1678 2457 2297054 570 0 0 0
  530. <6>[ 9.830963] hash1 hash1: managed by runtime pm: regulator
  531. <6>[ 9.831726] hash1 hash1: [u8500_hash_probe] successfully probed
  532. <6>[ 9.833251] usbcore: registered new interface driver usbhid
  533. <6>[ 9.833282] usbhid: USB HID core driver
  534. <6>[ 9.834197] logger: created 512K log 'log_main'
  535. <6>[ 9.834564] logger: created 256K log 'log_events'
  536. <6>[ 9.834869] logger: created 256K log 'log_radio'
  537. <6>[ 9.835083] logger: created 256K log 'log_system'
  538. <6>[ 9.835388] mmio_init
  539. <6>[ 9.835449] mmio_probe
  540. <6>[ 9.835968] mmio_camera mmio_camera: MMIO driver initialized with minor=41
  541. <6>[ 9.836029] -> NCP6914_i2c_probe(client=ncp6914, id=ncp6914)
  542. <6>[ 9.836029] <- NCP6914_i2c_probe(client=ncp6914) = 0
  543. <7>[ 9.840667] mmio_cam_power_pin_control pin : 2 , state 1
  544. <6>[ 9.841125] VT_CAM_ID = 0
  545. <7>[ 9.841125] mmio_cam_power_pin_control pin : 2 , state 0
  546. <3>[ 9.841857] mmc1: [MMC] CMD TIMEOUT STATUS: 4, CMD: 52
  547. <3>[ 9.842254] mmc1: [MMC] CMD TIMEOUT STATUS: 4, CMD: 52
  548. <3>[ 9.846069] mmc1: [MMC] CMD TIMEOUT STATUS: 4, CMD: 5
  549. <3>[ 9.846374] mmc1: [MMC] CMD TIMEOUT STATUS: 4, CMD: 5
  550. <3>[ 9.846710] mmc1: [MMC] CMD TIMEOUT STATUS: 4, CMD: 5
  551. <3>[ 9.847015] mmc1: [MMC] CMD TIMEOUT STATUS: 4, CMD: 5
  552. <6>[ 9.855102] Initialize NMF 2.10.118 Component Manager......
  553. <6>[ 9.855133] [ CM Linux Driver 2.10.117 ]
  554. <4>[ 9.855621] [svnet_init]
  555. <6>[ 9.857696] usbcore: registered new interface driver snd-usb-audio
  556. <6>[ 9.858062] ab8500_codec_platform_driver_init: Enter.
  557. <6>[ 9.858184] ab8500_codec_driver_probe: Register codec.
  558. <6>[ 9.858795] ux500_msp_drv_probe: Enter (idx: 0, dev-name: i2s.0, drv-name: i2s).
  559. <6>[ 9.858825] ux500_msp_drv_probe: Enter (idx: 1, dev-name: i2s.1, drv-name: i2s).
  560. <6>[ 9.858856] ux500_msp_drv_probe: Enter (idx: 2, dev-name: i2s.2, drv-name: i2s).
  561. <6>[ 9.858886] ux500_msp_drv_probe: Enter (idx: 3, dev-name: i2s.3, drv-name: i2s).
  562. <6>[ 9.859405] cg29xx_codec_driver_probe: Init codec private data..
  563. <6>[ 9.859405] cg29xx_codec_driver_probe: Register codec.
  564. <6>[ 9.859680] ux500_pcm_drv_probe: Register ux500-pcm SoC platform driver.
  565. <6>[ 9.859985] ab8500_codec_probe: Enter.
  566. <6>[ 9.886383] [usb] composite_setup:1069 GET_DES-DEV
  567. <6>[ 9.891143] ab8500-charger ab8500-charger.0: ab8500_charger_usb_state_changed usb_state: 0x00 mA: 0
  568. <6>[ 9.891174] ab8500-charger ab8500-charger.0: ab8500_charger_usb_state_changed usb_state: 0x02 mA: 0
  569. <6>[ 9.891174] [usb] composite_disconnect:1322 composite_disconnect -> switch_work
  570. <6>[ 9.891204] ab8500-charger ab8500-charger.0: ab8500_charger_usb_state_changed usb_state: 0x02 mA: 8
  571. <6>[ 9.912139] [usb] composite_switch_work:1444 [composite_switch_work]config=0x(null)
  572. <4>[ 9.914947] ASoC: Failed to create AD_OUT4 debugfs file
  573. <6>[ 9.916992] asoc: ab8500-codec-dai.0 <-> i2s.1 mapping ok
  574. <6>[ 9.918273] asoc: ab8500-codec-dai.1 <-> i2s.3 mapping ok
  575. <6>[ 9.918426] asoc: cg29xx-codec-dai.1 <-> i2s.0 mapping ok
  576. <6>[ 9.919921] input: U8500-card AB8500 Hs Status as /devices/platform/soc-audio/sound/card0/input10
  577. <6>[ 9.920410] ALSA device list:
  578. <6>[ 9.920410] #0: U8500-card
  579. <6>[ 9.920593] GACT probability NOT on
  580. <6>[ 9.920593] Mirror/redirect action on
  581. <6>[ 9.920654] u32 classifier
  582. <6>[ 9.920654] Actions configured
  583. <6>[ 9.920684] Netfilter messages via NETLINK v0.30.
  584. <6>[ 9.920776] nf_conntrack version 0.5.0 (8794 buckets, 35176 max)
  585. <4>[ 9.921081] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
  586. <4>[ 9.921112] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
  587. <4>[ 9.921112] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
  588. <6>[ 9.921783] ctnetlink v0.93: registering with nfnetlink.
  589. <6>[ 9.922149] xt_time: kernel timezone is -0000
  590. <6>[ 9.924468] ip_tables: (C) 2000-2006 Netfilter Core Team
  591. <6>[ 9.924652] arp_tables: (C) 2002 David S. Miller
  592. <6>[ 9.924774] TCP cubic registered
  593. <6>[ 9.925048] NET: Registered protocol family 10
  594. <6>[ 9.932403] IPv6 over IPv4 tunneling driver
  595. <6>[ 9.935028] NET: Registered protocol family 17
  596. <6>[ 9.935058] NET: Registered protocol family 15
  597. <6>[ 9.935180] Bluetooth: L2CAP ver 2.15
  598. <6>[ 9.935211] Bluetooth: L2CAP socket layer initialized
  599. <6>[ 9.935241] Bluetooth: SCO (Voice Link) ver 0.6
  600. <6>[ 9.935241] Bluetooth: SCO socket layer initialized
  601. <6>[ 9.935333] Bluetooth: RFCOMM TTY layer initialized
  602. <6>[ 9.935363] Bluetooth: RFCOMM socket layer initialized
  603. <6>[ 9.935363] Bluetooth: RFCOMM ver 1.11
  604. <6>[ 9.935394] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  605. <6>[ 9.935394] Bluetooth: BNEP filters: protocol multicast
  606. <6>[ 9.935424] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  607. <6>[ 9.935638] NET: Registered protocol family 35
  608. <6>[ 9.935852] Installing 9P2000 support
  609. <6>[ 9.956665] cpuidle: initiated for CPU0.
  610. <6>[ 9.958618] cpuidle: initiated for CPU1.
  611. <6>[ 9.959838] l2x0-prefetch: initialized.
  612. <6>[ 9.959869] VFP support v0.3:
  613. <6>[ 9.959930] implementor 41 architecture 3 part 30 variant 9 rev 2
  614. <6>[ 9.962158] regulator_init_complete: disabling u8500-esram12
  615. <6>[ 9.962646] sec_jack_probe : Registering jack driver
  616. <6>[ 9.963928] input: sec_jack as /devices/virtual/input/input11
  617. <6>[ 9.966064] sec_jack_get_det_level: ret=1
  618. <6>[ 9.968872] input: sec_touchkey as /devices/platform/i2c-gpio.5/i2c-5/5-0020/input/input12
  619. <5>[ 9.969818] cypress_touchkey 5-0020: cypress_touchkey_con_hw : called with flag 1.
  620. <7>[ 9.995361] [TouchKey] cypress_touchkey_probe : Mod Ver 0x08
  621. <7>[ 9.995391] [TouchKey] FW mod 0x0b
  622. <7>[ 9.996429] [TouchKey] touchkey_autocalibration : buf[0]=8 buf[1]=b buf[2]=8 buf[3]=0
  623. <6>[ 10.018768] [usb] composite_setup:1069 GET_DES-DEV
  624. <6>[ 10.019958] [usb] composite_setup:1089 GET_DES-CON
  625. <6>[ 10.021118] [usb] composite_setup:1089 GET_DES-CON
  626. <6>[ 10.026153] [usb] composite_setup:1122 SET_CON w_v=1
  627. <6>[ 10.026214] android_usb gadget: high speed config #1: ACM + MTP (SAMSUNG KIES mode)
  628. <6>[ 10.026336] ab8500-charger ab8500-charger.0: ab8500_charger_usb_state_changed usb_state: 0x02 mA: 500
  629. <6>[ 10.026580] [usb] composite_switch_work:1444 [composite_switch_work]config=0xc0c35cec
  630. <7>[ 10.105285] [Touchkey] autocal Enabled
  631. <7>[ 10.106994] Registered led device: button-backlight
  632. <5>[ 10.107666] cypress_touchkey 5-0020: cypress_touchkey_probe: called.
  633. <6>[ 10.109130] ab8500-rtc ab8500-rtc.0: setting system clock to 2012-08-05 10:54:51 UTC (1344164091)
  634. <4>[ 10.109802] Warning: unable to open an initial console.
  635. <6>[ 10.113006] Freeing init memory: 5108K
  636. <6>[ 10.120147] ab8500-fg ab8500-fg.0: CC_CONF_REG : 3
  637. <6>[ 10.120239] ab8500-fg ab8500-fg.0: Calibration WFI
  638. <6>[ 10.120605] [FG_DATA] 1249mAh/1500mAh 83% (Prev 1249mAh 83%) 4056mV 716 716 237mA 0mA 0 7 1 0 0 0 0 121 0 0 0 0 0 0 1678 2457 2297054 570 0 0 0
  639. <4>[ 10.121215] mmc1: host does not support reading read-only switch. assuming write-enable.
  640. <6>[ 10.121368] mmc1: new high speed SD card at address 0002
  641. <6>[ 10.124053] mmcblk1: mmc1:0002 00000 1.86 GiB
  642. <6>[ 10.125366] mmcblk1:
  643. <6>[ 10.128112] ab8500-fg ab8500-fg.0: CC_CONF_REG : 3
  644. <6>[ 10.128173] ab8500-fg ab8500-fg.0: Calibration WFI
  645. <6>[ 10.128448] [FG_DATA] 1249mAh/1500mAh 83% (Prev 1249mAh 83%) 4056mV 716 716 237mA 0mA 0 7 1 0 0 0 0 121 0 0 0 0 0 0 1678 2457 2297054 570 0 0 0
  646. <4>[ 10.129638] p1
  647. <3>[ 10.129730] init: reading config file, recovery.rc
  648. <4>[ 10.129760]
  649. <6>[ 10.154785] ab8500-fg ab8500-fg.0: CC_CONF_REG : 3
  650. <6>[ 10.154846] ab8500-fg ab8500-fg.0: Calibration WFI
  651. <6>[ 10.155822] [FG_DATA] 1249mAh/1500mAh 83% (Prev 1249mAh 83%) 4053mV 715 715 237mA 0mA 0 7 1 0 0 0 0 121 0 0 0 0 0 0 1678 2457 2297054 570 0 0 0
  652. <3>[ 10.370697] init: cannot open '/initlogo.rle'
  653. <3>[ 10.371307] init: SEC_DEVENC ***[/dev/block/mmcblk0p3][0]
  654. <6>[ 10.381744] EXT4-fs (mmcblk0p3): recovery complete
  655. <6>[ 10.381774] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
  656. <4>[ 10.385223] j4fs: no symbol version for module_layout
  657. <3>[ 10.385681] init: SEC_DEVENC ***[/dev/block/mmcblk0p1][0]
  658. <4>[ 10.387329] param: no symbol version for module_layout
  659. <3>[ 10.387512] init: SEC_DEVENC ***[tmpfs][0]
  660. <3>[ 10.397644] init: Unable to open persistent property directory /data/property errno: 2
  661. <3>[ 10.399169] init: service 'console' requires console
  662. <6>[ 10.402587] warning: `adbd.recovery' uses 32-bit capabilities (legacy support in use)
  663. <6>[ 10.402740] enabling adb
  664. <6>[ 10.402770] [usb] android_enable_function:612 ++ f->name=adb enable=1
  665. <6>[ 10.403350] [usb] set_enable_functions:543 disable usb_mass_storage
  666. <6>[ 10.403747] [usb] set_enable_functions:536 enable acm
  667. <6>[ 10.404174] [usb] set_enable_functions:536 enable adb
  668. <6>[ 10.404541] [usb] set_enable_functions:543 disable rndis
  669. <6>[ 10.404937] [usb] set_enable_functions:536 enable mtp
  670. <6>[ 10.405395] [usb] set_enable_functions:543 disable phonet
  671. <6>[ 10.405426] [usb] set_product:583 Change Device Descriptor : DeviceClass(0xef),SubClass(0x2),Protocol(0x1)
  672. <6>[ 10.405487] [usb] set_product:584 Change Label : [0]ACM + MTP + ADB (Debugging mode)
  673. <6>[ 10.405548] [usb] android_enable_function:675 dev->cdev=0xe2f0f860, dev->cdev->gadget=0xe29e5da0, dev->cdev->gadget->speed=0x3, mode=1
  674. <6>[ 10.405578] [usb] usb_composite_force_reset:192 disconnect usb
  675. <6>[ 10.426971] [usb] usb_composite_force_reset:195 connect usb again
  676. <6>[ 10.427032] [usb] android_enable_function:678 finished setting pid=0x6860
  677. <6>[ 10.427459] adb_open
  678. <6>[ 10.434417] ab8500-charger ab8500-charger.0: ab8500_charger_usb_state_changed usb_state: 0x03 mA: 500
  679. <4>[ 10.441833] ------------[ cut here ]------------
  680. <4>[ 10.441894] WARNING: at drivers/video/mcde/mcde_hw.c:1808 enable_flow+0xdc/0x380()
  681. <4>[ 10.441925] Modules linked in:
  682. <4>[ 10.441986] [<c050d84c>] (unwind_backtrace+0x0/0xf0) from [<c09f4928>] (dump_stack+0x10/0x24)
  683. <4>[ 10.442016] [<c09f4928>] (dump_stack+0x10/0x24) from [<c054c7c8>] (warn_slowpath_common+0x4c/0x64)
  684. <4>[ 10.442077] [<c054c7c8>] (warn_slowpath_common+0x4c/0x64) from [<c054c7f8>] (warn_slowpath_null+0x18/0x1c)
  685. <4>[ 10.442108] [<c054c7f8>] (warn_slowpath_null+0x18/0x1c) from [<c0706a00>] (enable_flow+0xdc/0x380)
  686. <4>[ 10.442169] [<c0706a00>] (enable_flow+0xdc/0x380) from [<c070b0b8>] (_mcde_chnl_update+0x2b4/0x69c)
  687. <4>[ 10.442199] [<c070b0b8>] (_mcde_chnl_update+0x2b4/0x69c) from [<c070b544>] (mcde_chnl_update+0xa4/0xc4)
  688. <4>[ 10.442260] [<c070b544>] (mcde_chnl_update+0xa4/0xc4) from [<c070cb34>] (mcde_display_update_default+0x74/0x130)
  689. <4>[ 10.442291] [<c070cb34>] (mcde_display_update_default+0x74/0x130) from [<c070bf8c>] (mcde_dss_update_overlay+0x68/0xa4)
  690. <4>[ 10.442352] [<c070bf8c>] (mcde_dss_update_overlay+0x68/0xa4) from [<c070dc68>] (apply_var+0x21c/0x24c)
  691. <4>[ 10.442382] [<c070dc68>] (apply_var+0x21c/0x24c) from [<c06ff444>] (fb_set_var+0x1b0/0x290)
  692. <4>[ 10.442443] [<c06ff444>] (fb_set_var+0x1b0/0x290) from [<c06ff690>] (do_fb_ioctl+0x16c/0x5f8)
  693. <4>[ 10.442504] [<c06ff690>] (do_fb_ioctl+0x16c/0x5f8) from [<c05f3794>] (vfs_ioctl+0x2c/0xac)
  694. <4>[ 10.442535] [<c05f3794>] (vfs_ioctl+0x2c/0xac) from [<c05f3e0c>] (do_vfs_ioctl+0x508/0x568)
  695. <4>[ 10.442565] [<c05f3e0c>] (do_vfs_ioctl+0x508/0x568) from [<c05f3ea0>] (sys_ioctl+0x34/0x54)
  696. <4>[ 10.442626] [<c05f3ea0>] (sys_ioctl+0x34/0x54) from [<c0506740>] (ret_fast_syscall+0x0/0x30)
  697. <4>[ 10.442718] ---[ end trace 7160a1ce03e12332 ]---
  698. <6>[ 10.567749] ab8500-charger ab8500-charger.0: ab8500_charger_usb_state_changed usb_state: 0x00 mA: 0
  699. <6>[ 10.567779] ab8500-charger ab8500-charger.0: ab8500_charger_usb_state_changed usb_state: 0x02 mA: 0
  700. <6>[ 10.567810] [usb] composite_disconnect:1300 composite_disconnect -> reset_config
  701. <6>[ 10.567901] [usb] composite_disconnect:1317 composite_disconnect -> mute_switch
  702. <6>[ 10.567901] ab8500-charger ab8500-charger.0: ab8500_charger_usb_state_changed usb_state: 0x02 mA: 8
  703. <6>[ 10.568084] adb_release
  704. <6>[ 10.568176] adb_open
  705. <6>[ 10.678680] [usb] composite_setup:1069 GET_DES-DEV
  706. <6>[ 10.683685] ab8500-charger ab8500-charger.0: ab8500_charger_usb_state_changed usb_state: 0x00 mA: 0
  707. <6>[ 10.683776] ab8500-charger ab8500-charger.0: ab8500_charger_usb_state_changed usb_state: 0x02 mA: 0
  708. <6>[ 10.683837] [usb] composite_disconnect:1317 composite_disconnect -> mute_switch
  709. <6>[ 10.683898] ab8500-charger ab8500-charger.0: ab8500_charger_usb_state_changed usb_state: 0x02 mA: 8
  710. <6>[ 10.810638] [usb] composite_setup:1069 GET_DES-DEV
  711. <6>[ 10.810943] [usb] composite_setup:1089 GET_DES-CON
  712. <6>[ 10.812164] [usb] composite_setup:1089 GET_DES-CON
  713. <6>[ 10.815124] [usb] composite_setup:1122 SET_CON w_v=1
  714. <6>[ 10.815185] android_usb gadget: high speed config #1: ACM + MTP + ADB (Debugging mode)
  715. <6>[ 10.815368] ab8500-charger ab8500-charger.0: ab8500_charger_usb_state_changed usb_state: 0x02 mA: 500
  716. <6>[ 10.815521] [usb] composite_switch_work:1444 [composite_switch_work]config=0xc0c35cec
  717. <6>[ 11.215789] ab8500-fg ab8500-fg.0: CC_CONF_REG : 3
  718. <6>[ 11.216033] ab8500-fg ab8500-fg.0: Calibration done...
  719. <6>[ 11.216339] [FG_DATA] 1249mAh/1500mAh 83% (Prev 1249mAh 83%) 4053mV 715 715 237mA 0mA 0 7 1 0 0 0 0 121 0 0 0 0 0 0 1678 2457 2297054 570 0 0 0
  720. <6>[ 11.216857] [FG_DATA] 1249mAh/1500mAh 83% (Prev 1249mAh 83%) 4053mV 715 715 237mA 0mA 0 7 1 1 2 0 0 120 0 0 0 0 0 0 1678 2457 2297054 570 0 0 0
  721. <7>[ 11.475830] hub 1-0:1.0: hub_suspend
  722. <7>[ 11.475921] usb usb1: bus auto-suspend
  723. <6>[ 12.809692] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
  724. <6>[ 12.910400] EXT4-fs (mmcblk0p4): recovery complete
  725. <6>[ 12.912597] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
  726. <6>[ 13.620574] EXT4-fs (mmcblk0p9): mounted filesystem with ordered data mode. Opts: (null)
  727. <6>[ 14.030792] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts:
  728. <6>[ 16.481201] ab8500-fg ab8500-fg.0: [FG_DATA] SwitchOffStatus : 0x1
  729. <6>[ 16.481231] ab8500-fg ab8500-fg.0: [FG_DATA] OFF STATUS, 0x0
  730. <6>[ 16.481231] [FG_DATA] *** Maybe this is a first boot ***
  731. <6>[ 16.501190] [TuningData] 83 4051 3998 287 185
  732. <6>[ 16.501251] ab8500-fg ab8500-fg.0: NEW capacity : 83, PARAM capacity : 0, VBAT : 3998
  733. <6>[ 16.501312] ab8500-fg ab8500-fg.0: New capacity will be used as an initial capacity, new 83% ( param 0% )
  734. <6>[ 18.874450] no such pid
  735. <6>[ 18.874511] no such pid
  736. <6>[ 26.875823] no such pid
  737. <6>[ 26.875885] no such pid
  738. <6>[ 31.220336] Filled vcap: 1251179
  739. <6>[ 31.475341] [TuningData] 83 4056 4002 299 182
  740. <6>[ 31.718627] [FG_DATA] 1251mAh/1500mAh 83% (Prev 1249mAh 83%) 4002mV 715 715 296mA 302mA 1679 7 1 1 2 0 0 120 0 83 0 0 0 0 1864 2457 2297054 570 0 0 0
  741. <6>[ 34.877166] no such pid
  742. <6>[ 34.877227] no such pid
  743. <6>[ 51.217773] Filled vcap: 1252906
  744. <6>[ 51.475128] [TuningData] 84 4058 4006 291 181
  745. <6>[ 51.721771] [FG_DATA] 1252mAh/1500mAh 84% (Prev 1252mAh 84%) 4006mV 719 719 318mA 310mA 1727 7 1 1 2 0 0 120 0 83 0 0 0 0 1725 2457 2297054 570 0 0 0
  746. <6>[ 71.218078] Filled vcap: 1254609
  747. <6>[ 71.484741] [TuningData] 84 4063 4010 302 178
  748. <6>[ 71.720794] [FG_DATA] 1254mAh/1500mAh 84% (Prev 1252mAh 84%) 4010mV 719 719 318mA 306mA 1703 7 1 1 2 0 0 120 0 83 0 0 0 0 1864 2457 2297054 570 0 0 0
  749. <6>[ 91.218658] Filled vcap: 1256309
  750. <6>[ 91.474456] [TuningData] 84 4065 4010 315 177
  751. <6>[ 91.718902] [FG_DATA] 1256mAh/1500mAh 84% (Prev 1252mAh 84%) 4010mV 719 719 319mA 306mA 1700 7 1 1 2 0 0 120 0 83 0 0 0 0 1864 2457 2297054 570 0 0 0
  752. <6>[ 111.218627] Filled vcap: 1258079
  753. <6>[ 111.473968] [TuningData] 84 4066 4011 317 176
  754. <6>[ 111.718902] [FG_DATA] 1258mAh/1500mAh 84% (Prev 1252mAh 84%) 4011mV 719 719 319mA 318mA 1770 7 1 1 2 0 0 120 0 83 0 0 0 0 1864 2457 2297054 570 0 0 0
  755. <6>[ 131.218658] Filled vcap: 1259849
  756. <6>[ 131.454559] ab8500_btemp_measure_temp: adc(188), temp(31)
  757. <6>[ 131.483337] [TuningData] 84 4066 4011 315 176
  758. <6>[ 131.718475] [FG_DATA] 1259mAh/1500mAh 84% (Prev 1252mAh 84%) 4011mV 716 716 317mA 318mA 1770 7 1 1 2 0 0 120 0 83 0 0 0 0 1864 2457 2297054 570 0 0 0
  759. <6>[ 131.718658] [FG_DATA] 1259mAh/1500mAh 84% (Prev 1252mAh 84%) 4011mV 716 716 317mA 318mA 1770 7 1 1 2 0 0 120 0 83 0 0 0 0 1864 2457 2297054 570 0 0 0
  760. <6>[ 151.218719] Filled vcap: 1261618
  761. <6>[ 151.472991] [TuningData] 84 4068 4013 318 175
  762. <6>[ 151.718841] [FG_DATA] 1261mAh/1500mAh 84% (Prev 1252mAh 84%) 4013mV 721 721 318mA 318mA 1769 7 1 1 2 0 0 120 0 83 0 0 0 0 1864 2457 2297054 570 0 0 0
  763. <6>[ 171.218475] Filled vcap: 1263390
  764. <6>[ 171.472503] [TuningData] 84 4068 4013 318 175
  765. <6>[ 171.718872] [FG_DATA] 1263mAh/1500mAh 84% (Prev 1252mAh 84%) 4013mV 721 721 318mA 319mA 1772 7 1 1 2 0 0 120 0 83 0 0 0 0 1864 2457 2297054 570 0 0 0
  766. <6>[ 191.218658] Filled vcap: 1265161
  767. <6>[ 191.472015] [TuningData] 84 4069 4014 318 175
  768. <6>[ 191.718872] [FG_DATA] 1265mAh/1500mAh 84% (Prev 1252mAh 84%) 4014mV 721 721 318mA 318mA 1771 7 1 1 2 0 0 120 0 83 0 0 0 0 1864 2457 2297054 570 0 0 0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!