API tools faq
paste
hi235221

ee

hi235221
Feb 25th, 2026
6
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 93.95 KB | None | 0 0
raw download clone embed print report
  1. ets Jul 29 2019 12:21:46
  2.  
  3. rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
  4. configsip: 0, SPIWP:0xee
  5. clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
  6. mode:DIO, clock div:2
  7. load:0x3fff0030,len:6380
  8. ho 0 tail 12 room 4
  9. load:0x40078000,len:15916
  10. load:0x40080400,len:3860
  11. entry 0x40080630
  12. I (29) boot: ESP-IDF 5.5.1 2nd stage bootloader
  13. I (29) boot: compile time Jan 15 2026 19:53:06
  14. I (29) boot: Multicore bootloader
  15. I (31) boot: chip revision: v3.1
  16. I (33) boot.esp32: SPI Speed : 40MHz
  17. I (37) boot.esp32: SPI Mode : DIO
  18. I (41) boot.esp32: SPI Flash Size : 4MB
  19. I (44) boot: Enabling RNG early entropy source...
  20. I (49) boot: Partition Table:
  21. I (51) boot: ## Label Usage Type ST Offset Length
  22. I (58) boot: 0 otadata OTA data 01 00 00009000 00002000
  23. I (64) boot: 1 phy_init RF data 01 01 0000b000 00001000
  24. I (71) boot: 2 app0 OTA app 00 10 00010000 001c0000
  25. I (77) boot: 3 app1 OTA app 00 11 001d0000 001c0000
  26. I (84) boot: 4 nvs WiFi data 01 02 00390000 0006d000
  27. I (90) boot: End of partition table
  28. I (94) esp_image: segment 0: paddr=00010020 vaddr=3f400020 size=3ed64h (257380) map
  29. I (189) esp_image: segment 1: paddr=0004ed8c vaddr=3ffbdb60 size=0128ch ( 4748) load
  30. I (191) esp_image: segment 2: paddr=00050020 vaddr=400d0020 size=efbf8h (982008) map
  31. I (528) esp_image: segment 3: paddr=0013fc20 vaddr=3ffbedec size=0456ch ( 17772) load
  32. I (535) esp_image: segment 4: paddr=00144194 vaddr=40080000 size=1a174h (106868) load
  33. I (577) esp_image: segment 5: paddr=0015e310 vaddr=50000000 size=00020h ( 32) load
  34. I (590) boot: Loaded app from partition at offset 0x10000
  35. I (590) boot: Disabling RNG early entropy source...
  36. [I][logger:121]: Log initialized
  37. [C][safe_mode:118]: Unsuccessful boot attempts: 4
  38. [D][esp32.preferences:155]: Writing 1 items: 0 cached, 1 written, 0 failed
  39. [I][a pp:091]: Running through setup()
  40. [C][wifi:475]: Starting
  41. [D][wifi:487]: Loaded set tings: FRITZ!Box 7590 UJ
  42. [D][wifi:1098]: Starting scan
  43. [C][component:249]: Setup w ifi took 127ms
  44. [W][component:390]: api set Warning flag: unspecified
  45. [I][app:138]: setup() finished successfully!
  46. [D][esp32_ble:394]: Enabling
  47. [W][component:547]: e sp32_ble took a long time for an operation (532 ms)
  48. [W][component:550]: Component s should block for at most 30 ms
  49. [D][esp32_ble_tracker:220]: Starting scan, set s canner state to STARTING.
  50. [W][component:399]: wifi set Warning flag: scanning for networks
  51. [I][app:210]: ESPHome version 2026.1.5 compiled on 2026-02-12 13:29:14 +0000
  52. [I][app:212]: Project esphome.bluetooth-proxy version 26.1.5
  53. [I][app:217]: E SP32 Chip: ESP32 r3.1, 2 core(s)
  54. [W][app:226]: Set minimum_chip_revision: "3.1" t o reduce binary size
  55. [C][logger:316]: Logger:
  56. Max Level: DEBUG
  57. Initial Level: D EBUG
  58. [C][logger:322]: Log Baud Rate: 115200
  59. Hardware UART: UART0
  60. [C][logger:332 ]: Task Log Buffer Size: 768 bytes
  61. [C][bluetooth_proxy:124]: Bluetooth Proxy:
  62. Active: YES
  63. Connections: 3
  64. [C][safe_mode.button:014]: Safe Mode Button 'Safe Mod e Boot'
  65. [C][safe_mode.button:017]: Icon: 'mdi:restart-alert'
  66. [C][factory_reset.b utton:014]: Factory Reset Button 'Factory reset'
  67. [C][factory_reset.button:017]: Icon: 'mdi:restart-alert'
  68. [C][esp32_ble:652]: BLE:
  69. MAC address: F4:2D:C9:87:F3: 9A
  70. IO Capability: none
  71. [C][esp32_ble_tracker:650]: BLE Tracker:
  72. [C][esp32_ble_tra cker:651]: Scan Duration: 300 s
  73. Scan Interval: 320.0 ms
  74. Scan Window: 30.0 ms
  75. Scan Type: ACTIVE
  76. Continuous Scanning: YES
  77. [C][esp32_ble_tracker:659]: Scanne r State: RUNNING
  78. Connecting: 0, discovered: 0, disconnecting: 0
  79. [C][bluetooth_pr oxy.connection:091]: BLE Connection:
  80. [C][esp32_ble_client:071]: Address:
  81. Auto -Connect: FALSE
  82. State: IDLE
  83. [C][bluetooth_proxy.connection:091]: BLE Connection:
  84. [ C][esp32_ble_client:071]: Address:
  85. Auto-Connect: FALSE
  86. State: IDLE
  87. [C][bluet ooth_proxy.connection:091]: BLE Connection:
  88. [C][esp32_ble_client:071]: Address:
  89. Auto-Connect: FALSE
  90. State: IDLE
  91. [C][wifi:1304]: WiFi:
  92. Local MAC: F4:2D:C9:87 :F3:98
  93. Connected: NO
  94. [C][esphome.ota:075]: Over-The-Air updates:
  95. Address: esp32 -bluetooth-proxy.local:3232
  96. Version: 2
  97. [C][safe_mode:021]: Safe Mode:
  98. Successfu l after: 60s
  99. Invoke after: 10 attempts
  100. Duration: 300s
  101. [C][safe_mode:038]: Boo tloader rollback: support unknown
  102. [W][safe_mode:044]: Last reset too quick; invok e in 6 restarts
  103. [C][http_request.ota:019]: Over-The-Air updates via HTTP request
  104. [ C][api:221]: Server:
  105. Address: esp32-bluetooth-proxy.local:6053
  106. Listen backlog: 4
  107. Max connections: 8
  108. [C][api:233]: Noise encryption: NO
  109. [C][improv_serial:063] : Improv Serial:
  110. [C][http_request:012]: HTTP Request:
  111. Timeout: 4500ms
  112. User-Agen t: ESPHome/2026.1.5 (https://esphome.io)
  113. Follow redirects: YES
  114. Redirect limit: 3
  115. [C][http_request.idf:028]: Buffer Size RX: 512
  116. Buffer Size TX: 512
  117. [C][mdns: 177]: mDNS:
  118. Hostname: esp32-bluetooth-proxy-87f398
  119. [D][http_request.update:045]: Network not connected, skipping update check
  120. [D][wifi:1227]: Found networks:
  121. [I][wifi:1188]: - 'FRITZ!Box 7590 UJ' (2C:91:AB:FE:4D:9C
  122.  
  123.  
  124. AL_CONNECT → SCAN_CONNECTING
  125. [I][wifi:899]: Connecting to 'FRITZ!Box 7590 UJ' (2C:91:AB:FE:4D:9C) (priority 0, attempt 1/2 in phase S
  126.  
  127.  
  128. :1749]: Failed 'FRITZ!Box 7590 UJ' (2C:91:AB:FE:4D:9C), priority 0 → 0
  129. [D][wifi:1820]: Retry attempt 2/2 in phase SCAN_CONNECTING
  130. [I][
  131. :91:AB:FE:4D:9C reason='Auth Expired'
  132. [W][wifi:1403]: Connecting to network failed (callback)
  133. [D][wifi:1749]: Failed 'FRITZ!Box 7590 U
  134.  
  135.  
  136. : Restarting adapter
  137. [W][wifi:1419]: Connecting to network failed
  138. [D][wifi:1569]: Retry phase: RESTARTING → SCAN_CONNECTING
  139. [D][wifi:10
  140.  
  141.  
  142. ▂▄▆█ Ch: 1 -45dB P:-1
  143. [D][wifi:1259]: - 14 non-matching (VERBOSE to show)
  144. [I][wifi:899]: Connecting to 'FRITZ!Box 7590 UJ' (2C:3A:FD:C
  145.  
  146. necting to network failed (callback)
  147. [D][wifi:1749]: Failed 'FRITZ!Box 7590 UJ' (2C:3A:FD:CD:37:90), priority 0 → 0
  148. [D][wifi:1820]: Re
  149.  
  150. ed
  151. [D][wifi:1346]: Disabling AP
  152. [C][wifi:1037]: IP Address: 192.168.178.35
  153. [C][wifi:1048]: SSID: 'FRITZ!Box 7590 UJ'
  154. BSSID: 2C:3A:
  155.  
  156.  
  157.  
  158.  
  159.  
  160.  
  161.  
  162. ponent:430]: wifi cleared Warning flag
  163. [D][api:139]: Accept 192.168.178.212
  164. [W][component:430]: api cleared Warning flag
  165. [D][api.connec
  166.  
  167. ed, 1 written, 0 failed
  168. [I][bluetooth_proxy:056]: [0] [60:74:F4:0B:89:A4] Connecting v3 without cache
  169. [D][esp32_ble_tracker:141]: conn
  170.  
  171.  
  172. Setting coexistence to Bluetooth to make connection.
  173. [I][esp32_ble_client:111]: [0] [60:74:F4:0B:89:A4] 0x00 Connecting
  174. [D][esp32_ble_
  175.  
  176. r state to IDLE.
  177. [D][esp32_ble_client:197]: [0] [60:74:F4:0B:89:A4] ESP_GATTC_CONNECT_EVT
  178. [D][esp32_ble_client:197]: [0] [60:74:F4:0B:
  179.  
  180.  
  181. :141]: connecting: 0, discovered: 0, disconnecting: 0
  182. [D][esp32_ble_tracker:878]: Setting coexistence preference to balanced.
  183. [D][esp3
  184.  
  185. 89:A4] medium conn params
  186. [I][esp32_ble_client:435]: [0] [60:74:F4:0B:89:A4] Service discovery complete
  187. [I][bluetooth_proxy:056]: [1]
  188.  
  189.  
  190. esp32_ble_tracker:838]: Promoting client to connect
  191. [D][esp32_ble_tracker:874]: Setting coexistence to Bluetooth to make connection.
  192. [
  193.  
  194. canner state to IDLE.
  195. [D][esp32_ble_tracker:141]: connecting: 1, discovered: 0, disconnecting: 0
  196. [D][esp32_ble_client:197]: [1] [A4:C1
  197.  
  198.  
  199. lient:193]: [1] [A4:C1:38:C2:69:45] Searching for services
  200. [D][esp32_ble_tracker:141]: connecting: 0, discovered: 0, disconnecting: 0
  201.  
  202.  
  203. C2:69:45] ESP_GATTC_SEARCH_CMPL_EVT
  204. [D][esp32_ble_client:217]: [1] [A4:C1:38:C2:69:45] medium conn params
  205. [I][esp32_ble_client:435]: [
  206.  
  207. request ignored, state: ESTABLISHED
  208. [W][bluetooth_proxy:051]: [0] [60:74:F4:0B:89:A4] Connection request ignored, state: ESTABLISHED
  209. [
  210. LISHED
  211. [W][bluetooth_proxy:051]: [1] [A4:C1:38:C2:69:45] Connection request ignored, state: ESTABLISHED
  212. [W][esp32_ble_client:374]: [0]
  213.  
  214. 60:74:F4:0B:89:A4] Disconnect, reason=0x08
  215. [D][esp32_ble_client:197]: [0] [60:74:F4:0B:89:A4] ESP_GATTC_CLOSE_EVT
  216. [D][bluetooth_proxy.
  217.  
  218. ing: 0, discovered: 1, disconnecting: 0
  219. [D][esp32_ble_tracker:830]: Stopping scan to make connection
  220. [D][esp32_ble_tracker:838]: Promo
  221.  
  222.  
  223. ent:217]: [0] [D4:AD:FC:A4:D0:14] fast conn params
  224. [D][esp32_ble_tracker:141]: connecting: 1, discovered: 0, disconnecting: 0
  225. [D][esp3
  226.  
  227. 14] ESP_GATTC_OPEN_EVT
  228. [I][esp32_ble_client:326]: [0] [D4:AD:FC:A4:D0:14] Connection open
  229. [D][esp32_ble_client:193]: [0] [D4:AD:FC:A4:
  230.  
  231.  
  232. le_tracker:220]: Starting scan, set scanner state to STARTING.
  233. [D][esp32_ble_client:197]: [0] [D4:AD:FC:A4:D0:14] ESP_GATTC_SEARCH_CM
  234.  
  235.  
  236. 4:AD:FC:A4:D0:14] cfg_mtu status 0, mtu 160
  237. [W][bluetooth_proxy:051]: [0] [D4:AD:FC:A4:D0:14] Connection request ignored, state: ESTA
  238.  
  239.  
  240. 2_ble_tracker:141]: connecting: 0, discovered: 1, disconnecting: 0
  241. [D][esp32_ble_tracker:830]: Stopping scan to make connection
  242. [D][es
  243.  
  244. Connecting
  245. [D][esp32_ble_client:217]: [2] [60:74:F4:0B:89:A4] medium conn params
  246. [D][esp32_ble_tracker:141]: connecting: 1, discovered
  247.  
  248.  
  249. nt:197]: [2] [60:74:F4:0B:89:A4] ESP_GATTC_OPEN_EVT
  250. [I][esp32_ble_client:326]: [2] [60:74:F4:0B:89:A4] Connection open
  251. [D][esp32_ble_t
  252.  
  253. state to STARTING.
  254. [D][esp32_ble_client:379]: [2] [60:74:F4:0B:89:A4] cfg_mtu status 0, mtu 160
  255. [D][wifi:2133]: Roam scan (-62 dBm, at
  256.  
  257.  
  258. [esp32_ble_client:197]: [1] [A4:C1:38:C2:69:45] ESP_GATTC_CLOSE_EVT
  259. [D][bluetooth_proxy.connection:381]: [1] [A4:C1:38:C2:69:45] Clos
  260.  
  261. ct, reason=0x08
  262. [D][esp32_ble_client:197]: [0] [D4:AD:FC:A4:D0:14] ESP_GATTC_CLOSE_EVT
  263. [D][bluetooth_proxy.connection:381]: [0] [D4:AD
  264.  
  265. mpt 1/1 in phase INITIAL_CONNECT)...
  266. [W][api.connection:2221]: Home Assistant 2026.2.3 (192.168.178.212): Network down; disconnect
  267. [W]
  268.  
  269. et Warning flag: associating to network
  270. [W][wifi:1403]: Connecting to network failed (callback)
  271. [D][wifi:1829]: Roam failed, reconnect
  272.  
  273.  
  274.  
  275. nent:550]: Components should block for at most 30 ms
  276. [I][esp32_ble_client:152]: [2] [60:74:F4:0B:89:A4] Disconnecting (conn_id: 2).
  277. [D
  278.  
  279. lient:197]: [2] [60:74:F4:0B:89:A4] ESP_GATTC_CLOSE_EVT
  280. [D][bluetooth_proxy.connection:381]: [2] [60:74:F4:0B:89:A4] Close, reason=0x
  281.  
  282. Expired'
  283. [E][wifi:1213]: Scan timeout
  284. [D][wifi:1569]: Retry phase: SCAN_CONNECTING → RETRY_HIDDEN
  285. [D][wifi:405]: Hidden candidate 'FRI
  286.  
  287.  
  288. 90 UJ' should be marked hidden
  289. [D][wifi:1346]: Disabling AP
  290. [C][wifi:1037]: IP Address: 192.168.178.35
  291. [C][wifi:1048]: SSID: 'FRITZ
  292.  
  293.  
  294.  
  295.  
  296.  
  297.  
  298. .178.1
  299. DNS2: 0.0.0.0
  300. [D][wifi:1369]: Reconnected after failed roam (attempt 1/3)
  301. [W][component:430]: wifi cleared Warning flag
  302. [D][api
  303.  
  304.  
  305. omplete, set scanner state to IDLE.
  306. [D][esp32_ble_tracker:220]: Starting scan, set scanner state to STARTING.
  307. [D][wifi:2133]: Roam sca
  308. [D][esphome.ota:451]: Starting handshake from 192.168.178.212
  309. [D][esphome.ota:451]: Starting update from 192.168.178.212
  310. [W][component:390]: esphome.ota set Warning flag: unspecified
  311. [D][esp32_ble_tracker:185]: Stopping scan.
  312. [I][esp32_ble_client:137]: [0] [] Disconnect requested, but already IDLE
  313. [I][esp32_ble_client:137]: [1] [] Disconnect requested, but already IDLE
  314. [I][esp32_ble_client:137]: [2] [] Disconnect requested, but already IDLE
  315. [D][esphome.ota:334]: Progress: 0.1%
  316. [D][esphome.ota:334]: Progress: 13.9%
  317. [D][esphome.ota:334]: Progress: 26.7%
  318. [D][esphome.ota:334]: Progress: 40.5%
  319. [D][esphome.ota:334]: Progress: 53.5%
  320. [D][esphome.ota:334]: Progress: 67.0%
  321. [D][esphome.ota:334]: Progress: 80.9%
  322. [D][esphome.ota:334]: Progress: 94.9%
  323. [I][esphome.ota:363]: Update complete
  324. [W][component:430]: esphome.ota cleared Warning flag
  325. [I][app:262]: Rebooting safely
  326. [D][esp32.preferences:155]: Writing 1 items: 1 cached, 0 written, 0 failed
  327. [W][component:390]: api set Warning flag: unspecified
  328. ets Jul 29 2019 12:21:46
  329.  
  330. rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
  331. configsip: 0, SPIWP:0xee
  332. clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
  333. mode:DIO, clock div:2
  334. load:0x3fff0030,len:6380
  335. ho 0 tail 12 room 4
  336. load:0x40078000,len:15916
  337. load:0x40080400,len:3860
  338. entry 0x40080630
  339. I (29) boot: ESP-IDF 5.5.1 2nd stage bootloader
  340. I (29) boot: compile time Jan 15 2026 19:53:06
  341. I (29) boot: Multicore bootloader
  342. I (30) boot: chip revision: v3.1
  343. I (33) boot.esp32: SPI Speed : 40MHz
  344. I (37) boot.esp32: SPI Mode : DIO
  345. I (40) boot.esp32: SPI Flash Size : 4MB
  346. I (44) boot: Enabling RNG early entropy source...
  347. I (49) boot: Partition Table:
  348. I (51) boot: ## Label Usage Type ST Offset Length
  349. I (57) boot: 0 otadata OTA data 01 00 00009000 00002000
  350. I (64) boot: 1 phy_init RF data 01 01 0000b000 00001000
  351. I (71) boot: 2 app0 OTA app 00 10 00010000 001c0000
  352. I (77) boot: 3 app1 OTA app 00 11 001d0000 001c0000
  353. I (84) boot: 4 nvs WiFi data 01 02 00390000 0006d000
  354. I (90) boot: End of partition table
  355. I (93) esp_image: segment 0: paddr=001d0020 vaddr=3f400020 size=3038ch (197516) map
  356. I (168) esp_image: segment 1: paddr=002003b4 vaddr=3ffbdb60 size=057f8h ( 22520) load
  357. I (177) esp_image: segment 2: paddr=00205bb4 vaddr=40080000 size=0a464h ( 42084) load
  358. I (194) esp_image: segment 3: paddr=00210020 vaddr=400d0020 size=ddc0ch (908300) map
  359. I (504) esp_image: segment 4: paddr=002edc34 vaddr=4008a464 size=0fc14h ( 64532) load
  360. I (529) esp_image: segment 5: paddr=002fd850 vaddr=50000000 size=00020h ( 32) load
  361. I (543) boot: Loaded app from partition at offset 0x1d0000
  362. I (543) boot: Disabling RNG early entropy source...
  363. [I][logger:118]: Log initialized
  364. [C][safe_mode:123]: Unsuccessful boot attempts: 0
  365. [D][esp32.preferences:153]: Writing 1 items: 0 cached, 1 written, 0 failed
  366. [I][app:091]: Running through setup()
  367. [C][wifi:610]: Starting
  368. [D][wifi:1263]: Starting scan
  369. [C][component:278]: Setup wifi took 135ms
  370. [W][component:422]: api set Warning flag: unspecified
  371. [I][app:138]: setup() finished successfully!
  372. [D][esp32_ble:508]: Enabling
  373. [W][component:579]: esp32_ble took a long time for an operation (517 ms)
  374. [W][component:582]: Components should block for at most 30 ms
  375. [D][esp32_ble_tracker:240]: Starting scan, set scanner state to STARTING.
  376. [W][component:431]: wifi set Warning flag: scanning for networks
  377. [I][app:215]: ESPHome version 2026.2.1 compiled on 2026-02-25 19:23:41 +0100
  378. [I][app:222]: ESP32 Chip: ESP32 rev3.1, 2 core(s)
  379. [W][app:231]: Set minimum_chip_revision: "3.1" to reduce binary size
  380. [C][logger:237]: Logger:
  381. Max Level: DEBUG
  382. Initial Level: DEBUG
  383. [C][logger:244]: Log Baud Rate: 115200
  384. Hardware UART: UART0
  385. [C][logger:254]: Task Log Buffer Size: 768 bytes
  386. [C][bluetooth_proxy:124]: Bluetooth Proxy:
  387. Active: YES
  388. Connections: 3
  389. [C][safe_mode.button:014]: Safe Mode Button 'Safe Mode Boot'
  390. [C][safe_mode.button:157]: Icon: 'mdi:restart-alert'
  391. [C][factory_reset.button:014]: Factory Reset Button 'Factory reset'
  392. [C][factory_reset.button:157]: Icon: 'mdi:restart-alert'
  393. [C][esp32_ble:650]: BLE:
  394. MAC address: F4:2D:C9:87:F3:9A
  395. IO Capability: none
  396. [C][esp32_ble_tracker:676]: BLE Tracker:
  397. [C][esp32_ble_tracker:677]: Scan Duration: 300 s
  398. Scan Interval: 320.0 ms
  399. Scan Window: 30.0 ms
  400. Scan Type: ACTIVE
  401. Continuous Scanning: YES
  402. [C][esp32_ble_tracker:685]: Scanner State: RUNNING
  403. Connecting: 0, discovered: 0, disconnecting: 0
  404. [C][bluetooth_proxy.connection:091]: BLE Connection:
  405. [C][esp32_ble_client:071]: Address:
  406. Auto-Connect: FALSE
  407. State: IDLE
  408. [C][bluetooth_proxy.connection:091]: BLE Connection:
  409. [C][esp32_ble_client:071]: Address:
  410. Auto-Connect: FALSE
  411. State: IDLE
  412. [C][bluetooth_proxy.connection:091]: BLE Connection:
  413. [C][esp32_ble_client:071]: Address:
  414. Auto-Connect: FALSE
  415. State: IDLE
  416. [C][wifi:1450]: WiFi:
  417. Local MAC: F4:2D:C9:87:F3:98
  418. Connected: NO
  419. [C][esphome.ota:075]: Over-The-Air updates:
  420. Address: esp32-bluetooth-proxy-87f398.local:3232
  421. Version: 2
  422. [C][safe_mode:022]: Safe Mode:
  423. Successful after: 60s
  424. Invoke after: 10 attempts
  425. Duration: 300s
  426. [C][safe_mode:039]: Bootloader rollback: not supported
  427. [C][api:237]: Server:
  428. Address: esp32-bluetooth-proxy-87f398.local:6053
  429. Listen backlog: 4
  430. Max connections: 8
  431. [C][api:244]: Noise encryption: YES
  432. [C][mdns:177]: mDNS:
  433. Hostname: esp32-bluetooth-proxy-87f398
  434. [D][wifi:1382]: Found networks:
  435. [I][wifi:1353]: - 'FRITZ!Box 7590 UJ' (2C:91:AB:FE:4D:9C) ▂▄▆█ Ch: 1 -47dB P:0
  436. [I][wifi:1353]: - 'FRITZ!Box 7590 UJ' (2C:3A:FD:CD:37:90) ▂▄▆█ Ch: 1 -61dB P:0
  437. [D][wifi:1739]: Retry phase: INITIAL_CONNECT → SCAN_CONNECTING
  438. [I][wifi:1064]: Connecting to 'FRITZ!Box 7590 UJ' (2C:91:AB:FE:4D:9C) (priority 0, attempt 1/2 in phase SCAN_CONNECTING)...
  439. [I][wifi:1475]: Connected
  440. [D][wifi:1492]: Disabling AP
  441. [C][wifi:1202]: IP Address: 192.168.178.35
  442. [C][wifi:1213]: SSID: 'FRITZ!Box 7590 UJ'
  443. BSSID: 2C:91:AB:FE:4D:9C
  444. Hostname: 'esp32-bluetooth-proxy-87f398'
  445. Signal strength: -50 dB ▂▄▆█
  446. Channel: 1
  447. Subnet: 255.255.255.0
  448. Gateway: 192.168.178.1
  449. DNS1: 192.168.178.1
  450. DNS2: 0.0.0.0
  451. [W][component:462]: wifi cleared Warning flag
  452. [D][api:222]: Accept 192.168.178.212
  453. [W][component:462]: api cleared Warning flag
  454. [D][api:222]: Accept 192.168.178.212
  455. [W][api.connection:2236]: 192.168.178.212 (192.168.178.212): Socket operation failed BAD_INDICATOR errno=11
  456. [W][component:579]: api took a long time for an operation (66 ms)
  457. [W][component:582]: Components should block for at most 30 ms
  458. [D][api:222]: Accept 192.168.178.212
  459. [D][api.connection:2230]: ESPHome Logs 2026.2.1 (192.168.178.212): connected
  460. [W][api.connection:2236]: 192.168.178.212 (192.168.178.212): Socket operation failed BAD_INDICATOR errno=11
  461. [I][app:215]: ESPHome version 2026.2.1 compiled on 2026-02-25 19:23:41 +0100
  462. [I][app:222]: ESP32 Chip: ESP32 rev3.1, 2 core(s)
  463. [W][app:231]: Set minimum_chip_revision: "3.1" to reduce binary size
  464. [C][logger:237]: Logger:
  465. Max Level: DEBUG
  466. Initial Level: DEBUG
  467. [C][logger:244]: Log Baud Rate: 115200
  468. Hardware UART: UART0
  469. [C][logger:254]: Task Log Buffer Size: 768 bytes
  470. [C][bluetooth_proxy:124]: Bluetooth Proxy:
  471. Active: YES
  472. Connections: 3
  473. [C][safe_mode.button:014]: Safe Mode Button 'Safe Mode Boot'
  474. [C][safe_mode.button:157]: Icon: 'mdi:restart-alert'
  475. [C][factory_reset.button:014]: Factory Reset Button 'Factory reset'
  476. [C][factory_reset.button:157]: Icon: 'mdi:restart-alert'
  477. [C][esp32_ble:650]: BLE:
  478. MAC address: F4:2D:C9:87:F3:9A
  479. IO Capability: none
  480. [C][esp32_ble_tracker:676]: BLE Tracker:
  481. [C][esp32_ble_tracker:677]: Scan Duration: 300 s
  482. Scan Interval: 320.0 ms
  483. Scan Window: 30.0 ms
  484. Scan Type: ACTIVE
  485. Continuous Scanning: YES
  486. [C][esp32_ble_tracker:685]: Scanner State: RUNNING
  487. Connecting: 0, discovered: 0, disconnecting: 0
  488. [C][bluetooth_proxy.connection:091]: BLE Connection:
  489. [C][esp32_ble_client:071]: Address:
  490. Auto-Connect: FALSE
  491. State: IDLE
  492. [C][bluetooth_proxy.connection:091]: BLE Connection:
  493. [C][esp32_ble_client:071]: Address:
  494. Auto-Connect: FALSE
  495. State: IDLE
  496. [C][bluetooth_proxy.connection:091]: BLE Connection:
  497. [C][esp32_ble_client:071]: Address:
  498. Auto-Connect: FALSE
  499. State: IDLE
  500. [C][wifi:1450]: WiFi:
  501. Local MAC: F4:2D:C9:87:F3:98
  502. Connected: YES
  503. [C][wifi:1202]: IP Address: 192.168.178.35
  504. [C][wifi:1213]: SSID: 'FRITZ!Box 7590 UJ'
  505. BSSID: 2C:91:AB:FE:4D:9C
  506. Hostname: 'esp32-bluetooth-proxy-87f398'
  507. Signal strength: -51 dB ▂▄▆█
  508. Channel: 1
  509. Subnet: 255.255.255.0
  510. Gateway: 192.168.178.1
  511. DNS1: 192.168.178.1
  512. DNS2: 0.0.0.0
  513. [C][esphome.ota:075]: Over-The-Air updates:
  514. Address: esp32-bluetooth-proxy-87f398.local:3232
  515. Version: 2
  516. [C][safe_mode:022]: Safe Mode:
  517. Successful after: 60s
  518. Invoke after: 10 attempts
  519. Duration: 300s
  520. [C][safe_mode:039]: Bootloader rollback: not supported
  521. [C][api:237]: Server:
  522. Address: esp32-bluetooth-proxy-87f398.local:6053
  523. Listen backlog: 4
  524. Max connections: 8
  525. [C][api:244]: Noise encryption: YES
  526. [C][mdns:177]: mDNS:
  527. Hostname: esp32-bluetooth-proxy-87f398
  528. [D][api:222]: Accept 192.168.178.212
  529. [D][api.connection:2230]: aioesphomeapi (192.168.178.212): connected
  530. [D][api.connection:2230]: aioesphomeapi (192.168.178.212): disconnected
  531. [W][api.connection:2236]: aioesphomeapi (192.168.178.212): Reading failed CONNECTION_CLOSED errno=128
  532. [D][api:222]: Accept 192.168.178.212
  533. [D][api.connection:2230]: Home Assistant 2026.2.3 (192.168.178.212): connected
  534. [I][safe_mode:071]: Boot seems successful; resetting boot loop counter
  535. [W][component:579]: safe_mode took a long time for an operation (63 ms)
  536. [W][component:582]: Components should block for at most 30 ms
  537. [D][esp32.preferences:153]: Writing 1 items: 0 cached, 1 written, 0 failed
  538. [W][api.connection:2236]: ESPHome Logs 2026.2.1 (192.168.178.212): Reading failed CONNECTION_CLOSED errno=128
  539. [I][bluetooth_proxy:056]: [0] [A4:C1:38:C2:69:45] Connecting v3 without cache
  540. [D][esp32_ble_tracker:157]: connecting: 0, discovered: 1, disconnecting: 0
  541. [D][esp32_ble_tracker:856]: Stopping scan to make connection
  542. [D][esp32_ble_tracker:864]: Promoting client to connect
  543. [D][esp32_ble_tracker:900]: Setting coexistence to Bluetooth to make connection.
  544. [I][esp32_ble_client:111]: [0] [A4:C1:38:C2:69:45] 0x00 Connecting
  545. [D][esp32_ble_client:217]: [0] [A4:C1:38:C2:69:45] fast conn params
  546. [D][esp32_ble_tracker:815]: Scan stop complete, set scanner state to IDLE.
  547. [D][esp32_ble_tracker:157]: connecting: 1, discovered: 0, disconnecting: 0
  548. [D][esp-idf:000][BTU_TASK]: W (108566) BT_HCI: hcif disc complete: hdl 0x0, rsn 0x3e dev_find 1
  549. [D][esp32_ble_client:197]: [0] [A4:C1:38:C2:69:45] ESP_GATTC_CONNECT_EVT
  550. [D][esp32_ble_client:197]: [0] [A4:C1:38:C2:69:45] ESP_GATTC_OPEN_EVT
  551. [I][esp32_ble_client:326]: [0] [A4:C1:38:C2:69:45] Connection open
  552. [D][esp32_ble_client:193]: [0] [A4:C1:38:C2:69:45] Searching for services
  553. [D][esp32_ble_tracker:157]: connecting: 0, discovered: 0, disconnecting: 0
  554. [D][esp32_ble_tracker:904]: Setting coexistence preference to balanced.
  555. [D][esp32_ble_tracker:240]: Starting scan, set scanner state to STARTING.
  556. [D][esp32_ble_client:197]: [0] [A4:C1:38:C2:69:45] ESP_GATTC_SEARCH_CMPL_EVT
  557. [D][esp32_ble_client:217]: [0] [A4:C1:38:C2:69:45] medium conn params
  558. [I][esp32_ble_client:435]: [0] [A4:C1:38:C2:69:45] Service discovery complete
  559. [D][esp32_ble_client:379]: [0] [A4:C1:38:C2:69:45] cfg_mtu status 0, mtu 23
  560. [W][bluetooth_proxy:051]: [0] [A4:C1:38:C2:69:45] Connection request ignored, state: ESTABLISHED
  561. [W][bluetooth_proxy:051]: [0] [A4:C1:38:C2:69:45] Connection request ignored, state: ESTABLISHED
  562. [I][bluetooth_proxy:056]: [1] [D4:AD:FC:A4:D0:14] Connecting v3 without cache
  563. [D][esp32_ble_tracker:157]: connecting: 0, discovered: 1, disconnecting: 0
  564. [D][esp32_ble_tracker:856]: Stopping scan to make connection
  565. [D][esp32_ble_tracker:864]: Promoting client to connect
  566. [D][esp32_ble_tracker:900]: Setting coexistence to Bluetooth to make connection.
  567. [I][esp32_ble_client:111]: [1] [D4:AD:FC:A4:D0:14] 0x00 Connecting
  568. [D][esp32_ble_client:217]: [1] [D4:AD:FC:A4:D0:14] fast conn params
  569. [D][esp32_ble_tracker:815]: Scan stop complete, set scanner state to IDLE.
  570. [D][esp32_ble_tracker:157]: connecting: 1, discovered: 0, disconnecting: 0
  571. [I][bluetooth_proxy:056]: [2] [60:74:F4:0B:89:A4] Connecting v3 without cache
  572. [D][esp32_ble_tracker:157]: connecting: 1, discovered: 1, disconnecting: 0
  573. [D][esp-idf:000][BTU_TASK]: W (126680) BT_HCI: hcif disc complete: hdl 0x0, rsn 0x13 dev_find 1
  574. [D][esp32_ble_client:362]: [0] [A4:C1:38:C2:69:45] ESP_GATTC_DISCONNECT_EVT, reason 0x13
  575. [D][bluetooth_proxy.connection:374]: [0] [A4:C1:38:C2:69:45] Disconnect, reason=0x13
  576. [D][esp32_ble_client:197]: [0] [A4:C1:38:C2:69:45] ESP_GATTC_CLOSE_EVT
  577. [D][bluetooth_proxy.connection:381]: [0] [A4:C1:38:C2:69:45] Close, reason=0x13, freeing slot
  578. [I][bluetooth_proxy:056]: [0] [D4:AD:FC:A4:D0:14] Connecting v3 without cache
  579. [D][esp32_ble_tracker:157]: connecting: 1, discovered: 2, disconnecting: 0
  580. [D][esp32_ble_client:142]: [0] [D4:AD:FC:A4:D0:14] Disconnect before connected, disconnect scheduled
  581. [D][esp-idf:000][BTU_TASK]: W (137957) BT_HCI: hcif disc complete: hdl 0x1, rsn 0x8 dev_find 1
  582. [D][esp32_ble_client:197]: [0] [D4:AD:FC:A4:D0:14] ESP_GATTC_CONNECT_EVT
  583. [D][esp32_ble_client:197]: [1] [D4:AD:FC:A4:D0:14] ESP_GATTC_CONNECT_EVT
  584. [D][esp32_ble_client:197]: [1] [D4:AD:FC:A4:D0:14] ESP_GATTC_OPEN_EVT
  585. [I][esp32_ble_client:326]: [1] [D4:AD:FC:A4:D0:14] Connection open
  586. [D][esp32_ble_client:193]: [1] [D4:AD:FC:A4:D0:14] Searching for services
  587. [D][esp32_ble_tracker:157]: connecting: 0, discovered: 2, disconnecting: 0
  588. [D][esp32_ble_tracker:864]: Promoting client to connect
  589. [I][esp32_ble_client:111]: [0] [D4:AD:FC:A4:D0:14] 0x00 Connecting
  590. [D][esp32_ble_client:217]: [0] [D4:AD:FC:A4:D0:14] fast conn params
  591. [D][esp32_ble_client:197]: [1] [D4:AD:FC:A4:D0:14] ESP_GATTC_SEARCH_CMPL_EVT
  592. [D][esp32_ble_client:217]: [1] [D4:AD:FC:A4:D0:14] medium conn params
  593. [I][esp32_ble_client:435]: [1] [D4:AD:FC:A4:D0:14] Service discovery complete
  594. [D][esp32_ble_client:379]: [1] [D4:AD:FC:A4:D0:14] cfg_mtu status 0, mtu 160
  595. [D][esp32_ble_client:197]: [0] [D4:AD:FC:A4:D0:14] ESP_GATTC_OPEN_EVT
  596. [I][esp32_ble_client:152]: [0] [D4:AD:FC:A4:D0:14] Disconnecting (conn_id: 1).
  597. [D][esp32_ble_tracker:157]: connecting: 0, discovered: 1, disconnecting: 1
  598. [D][esp32_ble_tracker:864]: Promoting client to connect
  599. [I][esp32_ble_client:111]: [2] [60:74:F4:0B:89:A4] 0x00 Connecting
  600. [D][esp32_ble_client:217]: [2] [60:74:F4:0B:89:A4] fast conn params
  601. [W][bluetooth_proxy:060]: Cannot get GATT services, not connected
  602. [D][esp32_ble_tracker:157]: connecting: 1, discovered: 0, disconnecting: 1
  603. [D][esp-idf:000][BTU_TASK]: W (138466) BT_GATT: gatt_connect wrong state 4
  604. [D][esp-idf:000][BTU_TASK]: W (138657) BT_HCI: hcif disc complete: hdl 0x1, rsn 0x3e dev_find 1
  605. [D][esp32_ble_client:197]: [2] [60:74:F4:0B:89:A4] ESP_GATTC_CONNECT_EVT
  606. [D][esp32_ble_client:197]: [2] [60:74:F4:0B:89:A4] ESP_GATTC_OPEN_EVT
  607. [I][esp32_ble_client:326]: [2] [60:74:F4:0B:89:A4] Connection open
  608. [D][esp32_ble_client:193]: [2] [60:74:F4:0B:89:A4] Searching for services
  609. [D][esp32_ble_tracker:157]: connecting: 0, discovered: 0, disconnecting: 1
  610. [D][esp32_ble_client:197]: [2] [60:74:F4:0B:89:A4] ESP_GATTC_SEARCH_CMPL_EVT
  611. [D][esp32_ble_client:217]: [2] [60:74:F4:0B:89:A4] medium conn params
  612. [I][esp32_ble_client:435]: [2] [60:74:F4:0B:89:A4] Service discovery complete
  613. [D][esp32_ble_client:379]: [2] [60:74:F4:0B:89:A4] cfg_mtu status 0, mtu 160
  614. [D][esp32_ble_client:362]: [0] [D4:AD:FC:A4:D0:14] ESP_GATTC_DISCONNECT_EVT, reason 0x08
  615. [D][bluetooth_proxy.connection:374]: [0] [D4:AD:FC:A4:D0:14] Disconnect, reason=0x08
  616. [D][esp32_ble_client:362]: [1] [D4:AD:FC:A4:D0:14] ESP_GATTC_DISCONNECT_EVT, reason 0x08
  617. [D][bluetooth_proxy.connection:374]: [1] [D4:AD:FC:A4:D0:14] Disconnect, reason=0x08
  618. [D][esp32_ble_client:197]: [1] [D4:AD:FC:A4:D0:14] ESP_GATTC_CLOSE_EVT
  619. [D][bluetooth_proxy.connection:381]: [1] [D4:AD:FC:A4:D0:14] Close, reason=0x08, freeing slot
  620. [D][esp32_ble_tracker:157]: connecting: 0, discovered: 0, disconnecting: 0
  621. [D][esp32_ble_tracker:904]: Setting coexistence preference to balanced.
  622. [D][esp32_ble_tracker:240]: Starting scan, set scanner state to STARTING.
  623. [D][esp-idf:000][BTU_TASK]: W (156387) BT_HCI: hcif disc complete: hdl 0x0, rsn 0x8 dev_find 1
  624. [I][bluetooth_proxy:056]: [0] [D4:AD:FC:A4:D0:14] Connecting v3 without cache
  625. [D][esp32_ble_tracker:157]: connecting: 0, discovered: 1, disconnecting: 0
  626. [D][esp32_ble_tracker:856]: Stopping scan to make connection
  627. [D][esp32_ble_tracker:864]: Promoting client to connect
  628. [D][esp32_ble_tracker:900]: Setting coexistence to Bluetooth to make connection.
  629. [I][esp32_ble_client:111]: [0] [D4:AD:FC:A4:D0:14] 0x00 Connecting
  630. [D][esp32_ble_client:217]: [0] [D4:AD:FC:A4:D0:14] fast conn params
  631. [D][esp32_ble_tracker:815]: Scan stop complete, set scanner state to IDLE.
  632. [D][esp32_ble_tracker:157]: connecting: 1, discovered: 0, disconnecting: 0
  633. [W][bluetooth_proxy:051]: [0] [D4:AD:FC:A4:D0:14] Connection request ignored, state: CONNECTING
  634. [D][esp32_ble_client:197]: [0] [D4:AD:FC:A4:D0:14] ESP_GATTC_CONNECT_EVT
  635. [D][esp32_ble_client:197]: [0] [D4:AD:FC:A4:D0:14] ESP_GATTC_OPEN_EVT
  636. [I][esp32_ble_client:326]: [0] [D4:AD:FC:A4:D0:14] Connection open
  637. [D][esp32_ble_client:193]: [0] [D4:AD:FC:A4:D0:14] Searching for services
  638. [D][esp32_ble_tracker:157]: connecting: 0, discovered: 0, disconnecting: 0
  639. [D][esp32_ble_tracker:904]: Setting coexistence preference to balanced.
  640. [D][esp32_ble_tracker:240]: Starting scan, set scanner state to STARTING.
  641. [D][esp32_ble_client:197]: [0] [D4:AD:FC:A4:D0:14] ESP_GATTC_SEARCH_CMPL_EVT
  642. [D][esp32_ble_client:217]: [0] [D4:AD:FC:A4:D0:14] medium conn params
  643. [I][esp32_ble_client:435]: [0] [D4:AD:FC:A4:D0:14] Service discovery complete
  644. [D][esp32_ble_client:379]: [0] [D4:AD:FC:A4:D0:14] cfg_mtu status 0, mtu 160
  645. [D][esp32_ble_client:362]: [2] [60:74:F4:0B:89:A4] ESP_GATTC_DISCONNECT_EVT, reason 0x08
  646. [D][bluetooth_proxy.connection:374]: [2] [60:74:F4:0B:89:A4] Disconnect, reason=0x08
  647. [D][esp32_ble_client:197]: [2] [60:74:F4:0B:89:A4] ESP_GATTC_CLOSE_EVT
  648. [D][bluetooth_proxy.connection:381]: [2] [60:74:F4:0B:89:A4] Close, reason=0x08, freeing slot
  649. [D][esp-idf:000][BTU_TASK]: W (157397) BT_HCI: hcif disc complete: hdl 0x1, rsn 0x8 dev_find 1
  650. [W][bluetooth_proxy:051]: [0] [D4:AD:FC:A4:D0:14] Connection request ignored, state: ESTABLISHED
  651. [W][bluetooth_proxy:051]: [0] [D4:AD:FC:A4:D0:14] Connection request ignored, state: ESTABLISHED
  652. [D][esp32_ble_client:362]: [0] [D4:AD:FC:A4:D0:14] ESP_GATTC_DISCONNECT_EVT, reason 0x08
  653. [D][bluetooth_proxy.connection:374]: [0] [D4:AD:FC:A4:D0:14] Disconnect, reason=0x08
  654. [D][esp32_ble_client:197]: [0] [D4:AD:FC:A4:D0:14] ESP_GATTC_CLOSE_EVT
  655. [D][bluetooth_proxy.connection:381]: [0] [D4:AD:FC:A4:D0:14] Close, reason=0x08, freeing slot
  656. [D][esp-idf:000][BTU_TASK]: W (178172) BT_HCI: hcif disc complete: hdl 0x0, rsn 0x8 dev_find 1
  657. [I][bluetooth_proxy:056]: [0] [60:74:F4:0B:89:A4] Connecting v3 with cache
  658. [D][esp32_ble_tracker:157]: connecting: 0, discovered: 1, disconnecting: 0
  659. [D][esp32_ble_tracker:856]: Stopping scan to make connection
  660. [D][esp32_ble_tracker:864]: Promoting client to connect
  661. [D][esp32_ble_tracker:900]: Setting coexistence to Bluetooth to make connection.
  662. [I][esp32_ble_client:111]: [0] [60:74:F4:0B:89:A4] 0x00 Connecting
  663. [D][esp32_ble_client:217]: [0] [60:74:F4:0B:89:A4] medium conn params
  664. [D][esp32_ble_tracker:815]: Scan stop complete, set scanner state to IDLE.
  665. [D][esp32_ble_tracker:157]: connecting: 1, discovered: 0, disconnecting: 0
  666. [D][esp-idf:000][BTU_TASK]: W (186126) BT_HCI: hcif disc complete: hdl 0x0, rsn 0x3e dev_find 1
  667. [D][esp32_ble_client:197]: [0] [60:74:F4:0B:89:A4] ESP_GATTC_CONNECT_EVT
  668. [D][esp32_ble_client:197]: [0] [60:74:F4:0B:89:A4] ESP_GATTC_OPEN_EVT
  669. [I][esp32_ble_client:326]: [0] [60:74:F4:0B:89:A4] Connection open
  670. [D][esp32_ble_tracker:157]: connecting: 0, discovered: 0, disconnecting: 0
  671. [D][esp32_ble_tracker:904]: Setting coexistence preference to balanced.
  672. [D][esp32_ble_tracker:240]: Starting scan, set scanner state to STARTING.
  673. [D][esp32_ble_client:379]: [0] [60:74:F4:0B:89:A4] cfg_mtu status 0, mtu 160
  674. [I][bluetooth_proxy:056]: [1] [A4:C1:38:C2:69:45] Connecting v3 with cache
  675. [D][esp32_ble_tracker:157]: connecting: 0, discovered: 1, disconnecting: 0
  676. [D][esp32_ble_tracker:856]: Stopping scan to make connection
  677. [D][esp32_ble_tracker:864]: Promoting client to connect
  678. [D][esp32_ble_tracker:900]: Setting coexistence to Bluetooth to make connection.
  679. [I][esp32_ble_client:111]: [1] [A4:C1:38:C2:69:45] 0x00 Connecting
  680. [D][esp32_ble_client:217]: [1] [A4:C1:38:C2:69:45] medium conn params
  681. [D][esp32_ble_tracker:815]: Scan stop complete, set scanner state to IDLE.
  682. [D][esp32_ble_tracker:157]: connecting: 1, discovered: 0, disconnecting: 0
  683. [D][esp32_ble_client:197]: [1] [A4:C1:38:C2:69:45] ESP_GATTC_CONNECT_EVT
  684. [D][esp32_ble_client:197]: [1] [A4:C1:38:C2:69:45] ESP_GATTC_OPEN_EVT
  685. [I][esp32_ble_client:326]: [1] [A4:C1:38:C2:69:45] Connection open
  686. [D][esp32_ble_tracker:157]: connecting: 0, discovered: 0, disconnecting: 0
  687. [D][esp32_ble_tracker:904]: Setting coexistence preference to balanced.
  688. [D][esp32_ble_tracker:240]: Starting scan, set scanner state to STARTING.
  689. [D][esp32_ble_client:379]: [1] [A4:C1:38:C2:69:45] cfg_mtu status 0, mtu 23
  690. [I][bluetooth_proxy:056]: [2] [D4:AD:FC:A4:D0:14] Connecting v3 with cache
  691. [D][esp32_ble_tracker:157]: connecting: 0, discovered: 1, disconnecting: 0
  692. [D][esp32_ble_tracker:856]: Stopping scan to make connection
  693. [D][esp32_ble_tracker:864]: Promoting client to connect
  694. [D][esp32_ble_tracker:900]: Setting coexistence to Bluetooth to make connection.
  695. [I][esp32_ble_client:111]: [2] [D4:AD:FC:A4:D0:14] 0x00 Connecting
  696. [D][esp32_ble_client:217]: [2] [D4:AD:FC:A4:D0:14] medium conn params
  697. [D][esp32_ble_tracker:815]: Scan stop complete, set scanner state to IDLE.
  698. [D][esp32_ble_tracker:157]: connecting: 1, discovered: 0, disconnecting: 0
  699. [D][esp32_ble_client:197]: [2] [D4:AD:FC:A4:D0:14] ESP_GATTC_CONNECT_EVT
  700. [D][esp32_ble_client:197]: [2] [D4:AD:FC:A4:D0:14] ESP_GATTC_OPEN_EVT
  701. [I][esp32_ble_client:326]: [2] [D4:AD:FC:A4:D0:14] Connection open
  702. [D][esp32_ble_tracker:157]: connecting: 0, discovered: 0, disconnecting: 0
  703. [D][esp32_ble_tracker:904]: Setting coexistence preference to balanced.
  704. [D][esp32_ble_tracker:240]: Starting scan, set scanner state to STARTING.
  705. [D][esp32_ble_client:379]: [2] [D4:AD:FC:A4:D0:14] cfg_mtu status 0, mtu 160
  706. [D][esp32_ble_client:362]: [0] [60:74:F4:0B:89:A4] ESP_GATTC_DISCONNECT_EVT, reason 0x08
  707. [D][bluetooth_proxy.connection:374]: [0] [60:74:F4:0B:89:A4] Disconnect, reason=0x08
  708. [D][esp32_ble_client:197]: [0] [60:74:F4:0B:89:A4] ESP_GATTC_CLOSE_EVT
  709. [D][bluetooth_proxy.connection:381]: [0] [60:74:F4:0B:89:A4] Close, reason=0x08, freeing slot
  710. [D][esp-idf:000][BTU_TASK]: W (204396) BT_HCI: hcif disc complete: hdl 0x0, rsn 0x8 dev_find 1
  711. [I][bluetooth_proxy:056]: [0] [60:74:F4:0B:89:A4] Connecting v3 with cache
  712. [D][esp32_ble_tracker:157]: connecting: 0, discovered: 1, disconnecting: 0
  713. [D][esp32_ble_tracker:856]: Stopping scan to make connection
  714. [D][esp32_ble_tracker:864]: Promoting client to connect
  715. [D][esp32_ble_tracker:900]: Setting coexistence to Bluetooth to make connection.
  716. [I][esp32_ble_client:111]: [0] [60:74:F4:0B:89:A4] 0x00 Connecting
  717. [D][esp32_ble_client:217]: [0] [60:74:F4:0B:89:A4] medium conn params
  718. [D][esp32_ble_tracker:815]: Scan stop complete, set scanner state to IDLE.
  719. [D][esp32_ble_tracker:157]: connecting: 1, discovered: 0, disconnecting: 0
  720. [D][esp32_ble_client:197]: [0] [60:74:F4:0B:89:A4] ESP_GATTC_CONNECT_EVT
  721. [D][esp32_ble_client:197]: [0] [60:74:F4:0B:89:A4] ESP_GATTC_OPEN_EVT
  722. [I][esp32_ble_client:326]: [0] [60:74:F4:0B:89:A4] Connection open
  723. [D][esp32_ble_tracker:157]: connecting: 0, discovered: 0, disconnecting: 0
  724. [D][esp32_ble_tracker:904]: Setting coexistence preference to balanced.
  725. [D][esp32_ble_tracker:240]: Starting scan, set scanner state to STARTING.
  726. [D][esp32_ble_client:379]: [0] [60:74:F4:0B:89:A4] cfg_mtu status 0, mtu 160
  727. [D][esp32_ble_client:362]: [1] [A4:C1:38:C2:69:45] ESP_GATTC_DISCONNECT_EVT, reason 0x13
  728. [D][bluetooth_proxy.connection:374]: [1] [A4:C1:38:C2:69:45] Disconnect, reason=0x13
  729. [D][esp32_ble_client:197]: [1] [A4:C1:38:C2:69:45] ESP_GATTC_CLOSE_EVT
  730. [D][bluetooth_proxy.connection:381]: [1] [A4:C1:38:C2:69:45] Close, reason=0x13, freeing slot
  731. [D][esp-idf:000][BTU_TASK]: W (211583) BT_HCI: hcif disc complete: hdl 0x1, rsn 0x13 dev_find 1
  732. [I][bluetooth_proxy:056]: [1] [A4:C1:38:C2:69:45] Connecting v3 with cache
  733. [D][esp32_ble_tracker:157]: connecting: 0, discovered: 1, disconnecting: 0
  734. [D][esp32_ble_tracker:856]: Stopping scan to make connection
  735. [D][esp32_ble_tracker:864]: Promoting client to connect
  736. [D][esp32_ble_tracker:900]: Setting coexistence to Bluetooth to make connection.
  737. [I][esp32_ble_client:111]: [1] [A4:C1:38:C2:69:45] 0x00 Connecting
  738. [D][esp32_ble_client:217]: [1] [A4:C1:38:C2:69:45] medium conn params
  739. [D][esp32_ble_tracker:815]: Scan stop complete, set scanner state to IDLE.
  740. [D][esp32_ble_tracker:157]: connecting: 1, discovered: 0, disconnecting: 0
  741. [D][esp32_ble_client:197]: [1] [A4:C1:38:C2:69:45] ESP_GATTC_CONNECT_EVT
  742. [D][esp32_ble_client:197]: [1] [A4:C1:38:C2:69:45] ESP_GATTC_OPEN_EVT
  743. [I][esp32_ble_client:326]: [1] [A4:C1:38:C2:69:45] Connection open
  744. [D][esp32_ble_tracker:157]: connecting: 0, discovered: 0, disconnecting: 0
  745. [D][esp32_ble_tracker:904]: Setting coexistence preference to balanced.
  746. [D][esp32_ble_tracker:240]: Starting scan, set scanner state to STARTING.
  747. [D][esp32_ble_client:379]: [1] [A4:C1:38:C2:69:45] cfg_mtu status 0, mtu 23
  748. [D][esp-idf:000][BTU_TASK]: W (221157) BT_HCI: hcif disc complete: hdl 0x2, rsn 0x8 dev_find 1
  749. [D][esp32_ble_client:362]: [2] [D4:AD:FC:A4:D0:14] ESP_GATTC_DISCONNECT_EVT, reason 0x08
  750. [D][bluetooth_proxy.connection:374]: [2] [D4:AD:FC:A4:D0:14] Disconnect, reason=0x08
  751. [D][esp32_ble_client:197]: [2] [D4:AD:FC:A4:D0:14] ESP_GATTC_CLOSE_EVT
  752. [D][bluetooth_proxy.connection:381]: [2] [D4:AD:FC:A4:D0:14] Close, reason=0x08, freeing slot
  753. [I][bluetooth_proxy:056]: [2] [D4:AD:FC:A4:D0:14] Connecting v3 with cache
  754. [D][esp32_ble_tracker:157]: connecting: 0, discovered: 1, disconnecting: 0
  755. [D][esp32_ble_tracker:856]: Stopping scan to make connection
  756. [D][esp32_ble_tracker:864]: Promoting client to connect
  757. [D][esp32_ble_tracker:900]: Setting coexistence to Bluetooth to make connection.
  758. [I][esp32_ble_client:111]: [2] [D4:AD:FC:A4:D0:14] 0x00 Connecting
  759. [D][esp32_ble_client:217]: [2] [D4:AD:FC:A4:D0:14] medium conn params
  760. [D][esp32_ble_tracker:815]: Scan stop complete, set scanner state to IDLE.
  761. [D][esp32_ble_tracker:157]: connecting: 1, discovered: 0, disconnecting: 0
  762. [D][esp32_ble_client:197]: [2] [D4:AD:FC:A4:D0:14] ESP_GATTC_CONNECT_EVT
  763. [D][esp32_ble_client:197]: [2] [D4:AD:FC:A4:D0:14] ESP_GATTC_OPEN_EVT
  764. [I][esp32_ble_client:326]: [2] [D4:AD:FC:A4:D0:14] Connection open
  765. [D][esp32_ble_tracker:157]: connecting: 0, discovered: 0, disconnecting: 0
  766. [D][esp32_ble_tracker:904]: Setting coexistence preference to balanced.
  767. [D][esp32_ble_tracker:240]: Starting scan, set scanner state to STARTING.
  768. [D][esp32_ble_client:379]: [2] [D4:AD:FC:A4:D0:14] cfg_mtu status 0, mtu 160
  769. [D][esp-idf:000][BTU_TASK]: W (226556) BT_HCI: hcif disc complete: hdl 0x1, rsn 0x13 dev_find 1
  770. [D][esp32_ble_client:362]: [1] [A4:C1:38:C2:69:45] ESP_GATTC_DISCONNECT_EVT, reason 0x13
  771. [D][bluetooth_proxy.connection:374]: [1] [A4:C1:38:C2:69:45] Disconnect, reason=0x13
  772. [D][esp32_ble_client:197]: [1] [A4:C1:38:C2:69:45] ESP_GATTC_CLOSE_EVT
  773. [D][bluetooth_proxy.connection:381]: [1] [A4:C1:38:C2:69:45] Close, reason=0x13, freeing slot
  774. [D][esp32_ble_client:362]: [0] [60:74:F4:0B:89:A4] ESP_GATTC_DISCONNECT_EVT, reason 0x08
  775. [D][bluetooth_proxy.connection:374]: [0] [60:74:F4:0B:89:A4] Disconnect, reason=0x08
  776. [D][esp32_ble_client:197]: [0] [60:74:F4:0B:89:A4] ESP_GATTC_CLOSE_EVT
  777. [D][bluetooth_proxy.connection:381]: [0] [60:74:F4:0B:89:A4] Close, reason=0x08, freeing slot
  778. [D][esp-idf:000][BTU_TASK]: W (228967) BT_HCI: hcif disc complete: hdl 0x0, rsn 0x8 dev_find 1
  779. [I][bluetooth_proxy:056]: [0] [60:74:F4:0B:89:A4] Connecting v3 with cache
  780. [D][esp32_ble_tracker:157]: connecting: 0, discovered: 1, disconnecting: 0
  781. [D][esp32_ble_tracker:856]: Stopping scan to make connection
  782. [D][esp32_ble_tracker:864]: Promoting client to connect
  783. [D][esp32_ble_tracker:900]: Setting coexistence to Bluetooth to make connection.
  784. [I][esp32_ble_client:111]: [0] [60:74:F4:0B:89:A4] 0x00 Connecting
  785. [D][esp32_ble_client:217]: [0] [60:74:F4:0B:89:A4] medium conn params
  786. [D][esp32_ble_tracker:815]: Scan stop complete, set scanner state to IDLE.
  787. [D][esp32_ble_tracker:157]: connecting: 1, discovered: 0, disconnecting: 0
  788. [D][esp32_ble_client:362]: [2] [D4:AD:FC:A4:D0:14] ESP_GATTC_DISCONNECT_EVT, reason 0x08
  789. [D][bluetooth_proxy.connection:374]: [2] [D4:AD:FC:A4:D0:14] Disconnect, reason=0x08
  790. [D][esp32_ble_client:197]: [2] [D4:AD:FC:A4:D0:14] ESP_GATTC_CLOSE_EVT
  791. [D][bluetooth_proxy.connection:381]: [2] [D4:AD:FC:A4:D0:14] Close, reason=0x08, freeing slot
  792. [D][esp-idf:000][BTU_TASK]: W (240417) BT_HCI: hcif disc complete: hdl 0x2, rsn 0x8 dev_find 1
  793. [I][bluetooth_proxy:056]: [1] [A4:C1:38:C2:69:45] Connecting v3 with cache
  794. [D][esp32_ble_tracker:157]: connecting: 1, discovered: 1, disconnecting: 0
  795. [D][esp-idf:000][BTU_TASK]: W (240845) BT_HCI: hcif disc complete: hdl 0x0, rsn 0x3e dev_find 1
  796. [D][esp-idf:000][BTU_TASK]: W (240992) BT_HCI: hcif disc complete: hdl 0x0, rsn 0x3e dev_find 1
  797. [D][esp-idf:000][BTU_TASK]: W (241307) BT_HCI: hcif disc complete: hdl 0x0, rsn 0x3e dev_find 1
  798. [D][esp32_ble_client:197]: [0] [60:74:F4:0B:89:A4] ESP_GATTC_CONNECT_EVT
  799. [D][esp32_ble_client:197]: [0] [60:74:F4:0B:89:A4] ESP_GATTC_OPEN_EVT
  800. [I][esp32_ble_client:326]: [0] [60:74:F4:0B:89:A4] Connection open
  801. [D][esp32_ble_tracker:157]: connecting: 0, discovered: 1, disconnecting: 0
  802. [D][esp32_ble_tracker:864]: Promoting client to connect
  803. [I][esp32_ble_client:111]: [1] [A4:C1:38:C2:69:45] 0x00 Connecting
  804. [D][esp32_ble_client:217]: [1] [A4:C1:38:C2:69:45] medium conn params
  805. [D][esp32_ble_tracker:157]: connecting: 1, discovered: 0, disconnecting: 0
  806. [D][esp32_ble_client:379]: [0] [60:74:F4:0B:89:A4] cfg_mtu status 0, mtu 160
  807. [D][esp32_ble_client:197]: [1] [A4:C1:38:C2:69:45] ESP_GATTC_CONNECT_EVT
  808. [D][esp32_ble_client:197]: [1] [A4:C1:38:C2:69:45] ESP_GATTC_OPEN_EVT
  809. [I][esp32_ble_client:326]: [1] [A4:C1:38:C2:69:45] Connection open
  810. [D][esp32_ble_tracker:157]: connecting: 0, discovered: 0, disconnecting: 0
  811. [D][esp32_ble_tracker:904]: Setting coexistence preference to balanced.
  812. [D][esp32_ble_tracker:240]: Starting scan, set scanner state to STARTING.
  813. [D][esp32_ble_client:379]: [1] [A4:C1:38:C2:69:45] cfg_mtu status 0, mtu 23
  814. [D][esp32_ble_client:362]: [1] [A4:C1:38:C2:69:45] ESP_GATTC_DISCONNECT_EVT, reason 0x13
  815. [D][bluetooth_proxy.connection:374]: [1] [A4:C1:38:C2:69:45] Disconnect, reason=0x13
  816. [D][esp32_ble_client:197]: [1] [A4:C1:38:C2:69:45] ESP_GATTC_CLOSE_EVT
  817. [D][bluetooth_proxy.connection:381]: [1] [A4:C1:38:C2:69:45] Close, reason=0x13, freeing slot
  818. [D][esp-idf:000][BTU_TASK]: W (256625) BT_HCI: hcif disc complete: hdl 0x1, rsn 0x13 dev_find 1
  819. [D][esp32_ble_client:362]: [0] [60:74:F4:0B:89:A4] ESP_GATTC_DISCONNECT_EVT, reason 0x08
  820. [D][bluetooth_proxy.connection:374]: [0] [60:74:F4:0B:89:A4] Disconnect, reason=0x08
  821. [D][esp32_ble_client:197]: [0] [60:74:F4:0B:89:A4] ESP_GATTC_CLOSE_EVT
  822. [D][bluetooth_proxy.connection:381]: [0] [60:74:F4:0B:89:A4] Close, reason=0x08, freeing slot
  823. [D][esp-idf:000][BTU_TASK]: W (259567) BT_HCI: hcif disc complete: hdl 0x0, rsn 0x8 dev_find 1
  824. [I][bluetooth_proxy:056]: [0] [D4:AD:FC:A4:D0:14] Connecting v3 with cache
  825. [D][esp32_ble_tracker:157]: connecting: 0, discovered: 1, disconnecting: 0
  826. [D][esp32_ble_tracker:856]: Stopping scan to make connection
  827. [D][esp32_ble_tracker:864]: Promoting client to connect
  828. [D][esp32_ble_tracker:900]: Setting coexistence to Bluetooth to make connection.
  829. [I][esp32_ble_client:111]: [0] [D4:AD:FC:A4:D0:14] 0x00 Connecting
  830. [D][esp32_ble_client:217]: [0] [D4:AD:FC:A4:D0:14] medium conn params
  831. [D][esp32_ble_tracker:815]: Scan stop complete, set scanner state to IDLE.
  832. [D][esp32_ble_tracker:157]: connecting: 1, discovered: 0, disconnecting: 0
  833. [D][esp-idf:000][BTU_TASK]: W (287027) BT_HCI: hcif disc complete: hdl 0x0, rsn 0x3e dev_find 1
  834. [D][esp-idf:000][BTU_TASK]: W (287105) BT_HCI: hcif disc complete: hdl 0x0, rsn 0x3e dev_find 1
  835. [W][bluetooth_proxy:051]: [0] [D4:AD:FC:A4:D0:14] Connection request ignored, state: CONNECTING
  836. [D][esp-idf:000][BTU_TASK]: W (297446) BT_HCI: hcif disc complete: hdl 0x0, rsn 0x3e dev_find 1
  837. [D][esp32_ble_client:197]: [0] [D4:AD:FC:A4:D0:14] ESP_GATTC_CONNECT_EVT
  838. [D][esp32_ble_client:197]: [0] [D4:AD:FC:A4:D0:14] ESP_GATTC_OPEN_EVT
  839. [I][esp32_ble_client:326]: [0] [D4:AD:FC:A4:D0:14] Connection open
  840. [D][esp32_ble_tracker:157]: connecting: 0, discovered: 0, disconnecting: 0
  841. [D][esp32_ble_tracker:904]: Setting coexistence preference to balanced.
  842. [D][esp32_ble_tracker:240]: Starting scan, set scanner state to STARTING.
  843. [D][esp32_ble_client:379]: [0] [D4:AD:FC:A4:D0:14] cfg_mtu status 0, mtu 160
  844. [D][esp32_ble_client:362]: [0] [D4:AD:FC:A4:D0:14] ESP_GATTC_DISCONNECT_EVT, reason 0x08
  845. [D][bluetooth_proxy.connection:374]: [0] [D4:AD:FC:A4:D0:14] Disconnect, reason=0x08
  846. [D][esp32_ble_client:197]: [0] [D4:AD:FC:A4:D0:14] ESP_GATTC_CLOSE_EVT
  847. [D][bluetooth_proxy.connection:381]: [0] [D4:AD:FC:A4:D0:14] Close, reason=0x08, freeing slot
  848. [D][esp-idf:000][BTU_TASK]: W (315580) BT_HCI: hcif disc complete: hdl 0x0, rsn 0x8 dev_find 1
  849. [D][wifi:2327]: Roam scan (-49 dBm, attempt 1/3)
  850. [D][esp32_ble_tracker:815]: Scan complete, set scanner state to IDLE.
  851. [D][esp32_ble_tracker:240]: Starting scan, set scanner state to STARTING.
  852. [D][esp32_ble_tracker:815]: Scan complete, set scanner state to IDLE.
  853. [D][esp32_ble_tracker:240]: Starting scan, set scanner state to STARTING.
  854. [D][esp32_ble_tracker:815]: Scan complete, set scanner state to IDLE.
  855. [D][esp32_ble_tracker:240]: Starting scan, set scanner state to
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!