SHARE
TWEET

armbian_rockpro64

Bullet64 Dec 7th, 2018 81 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. frank@rockpro64:~$ dmesg
  2. [    0.000000] Booting Linux on physical CPU 0x0
  3. [    0.000000] Initializing cgroup subsys cpuset
  4. [    0.000000] Initializing cgroup subsys cpu
  5. [    0.000000] Initializing cgroup subsys cpuacct
  6. [    0.000000] Linux version 4.4.166-rockchip64 (root@nightly) (gcc version 7.2.1 20171011 (Linaro GCC 7.2-2017.11) ) #17 SMP Mon Dec 3 16:25:27 CET 2018
  7. [    0.000000] Boot CPU: AArch64 Processor [410fd034]
  8. [    0.000000] earlycon: Early serial console at MMIO32 0xff1a0000 (options '')
  9. [    0.000000] bootconsole [uart0] enabled
  10. [    0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
  11. [    0.000000] On node 0 totalpages: 523776
  12. [    0.000000]   DMA zone: 8184 pages used for memmap
  13. [    0.000000]   DMA zone: 0 pages reserved
  14. [    0.000000]   DMA zone: 523776 pages, LIFO batch:31
  15. [    0.000000] psci: probing for conduit method from DT.
  16. [    0.000000] psci: PSCIv1.0 detected in firmware.
  17. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  18. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
  19. [    0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07fef1000 s46312 r8192 d31512 u86016
  20. [    0.000000] pcpu-alloc: s46312 r8192 d31512 u86016 alloc=21*4096
  21. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
  22. [    0.000000] Detected VIPT I-cache on CPU0
  23. [    0.000000] CPU features: enabling workaround for ARM erratum 845719
  24. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 515592
  25. [    0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 swiotlb=1 root=UUID=d586ed3c-f09c-4ef8-b402-13c7ceb007d3 rootwait rootfstype=ext4 console=ttyS2,1500000 console=tty1 panic=10 consoleblank=0 loglevel=1 ubootpart=aa1a7c28-01 usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068:u   cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
  26. [    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
  27. [    0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  28. [    0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  29. [    0.000000] software IO TLB [mem 0x7fea9000-0x7fee9000] (0MB) mapped at [ffffffc07fea9000-ffffffc07fee8fff]
  30. [    0.000000] Memory: 2034096K/2095104K available (11390K kernel code, 1524K rwdata, 4024K rodata, 1216K init, 778K bss, 61008K reserved, 0K cma-reserved)
  31. [    0.000000] Virtual kernel memory layout:
  32.                    modules : 0xffffff8000000000 - 0xffffff8008000000   (   128 MB)
  33.                    vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000   (   246 GB)
  34.                      .init : 0xffffff8008fa0000 - 0xffffff80090d0000   (  1216 KB)
  35.                      .text : 0xffffff8008080000 - 0xffffff8008ba0000   ( 11392 KB)
  36.                    .rodata : 0xffffff8008ba0000 - 0xffffff8008fa0000   (  4096 KB)
  37.                      .data : 0xffffff80090d0000 - 0xffffff800924d008   (  1525 KB)
  38.                    vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000   (     8 GB maximum)
  39.                              0xffffffbdc0008000 - 0xffffffbdc2000000   (    31 MB actual)
  40.                    fixed   : 0xffffffbffe7fb000 - 0xffffffbffec00000   (  4116 KB)
  41.                    PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000   (    16 MB)
  42.                    memory  : 0xffffffc000200000 - 0xffffffc080000000   (  2046 MB)
  43. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  44. [    0.000000] Hierarchical RCU implementation.
  45. [    0.000000]  Build-time adjustment of leaf fanout to 64.
  46. [    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
  47. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
  48. [    0.000000] NR_IRQS:64 nr_irqs:64 0
  49. [    0.000000] GIC: Using split EOI/Deactivate mode
  50. [    0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
  51. [    0.000000] ITS: allocated 65536 Devices @7d100000 (psz 64K, shr 0)
  52. [    0.000000] ITS: using cache flushing for cmd queue
  53. [    0.000000] GIC: using LPI property table @0x000000007d090000
  54. [    0.000000] ITS: Allocated 1792 chunks for LPIs
  55. [    0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
  56. [    0.000000] CPU0: using LPI pending table @0x000000007d0a0000
  57. [    0.000000] GIC: using cache flushing for LPI property table
  58. [    0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
  59. [    0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
  60. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  61. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  62. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  63. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  64. [    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
  65. [    0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
  66. [    0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
  67. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  68. [    0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  69. [    0.001267] Console: colour dummy device 80x25
  70. [    0.001279] console [tty1] enabled
  71. [    0.001288] bootconsole [uart0] disabled
  72. [    0.001311] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  73. [    0.001324] pid_max: default: 32768 minimum: 301
  74. [    0.001433] Security Framework initialized
  75. [    0.001443] Yama: becoming mindful.
  76. [    0.001467] AppArmor: AppArmor disabled by boot time parameter
  77. [    0.001522] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  78. [    0.001534] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  79. [    0.002221] Initializing cgroup subsys io
  80. [    0.002239] Initializing cgroup subsys memory
  81. [    0.002271] Initializing cgroup subsys devices
  82. [    0.002284] Initializing cgroup subsys freezer
  83. [    0.002297] Initializing cgroup subsys net_cls
  84. [    0.002308] Initializing cgroup subsys perf_event
  85. [    0.002322] Initializing cgroup subsys net_prio
  86. [    0.002338] Initializing cgroup subsys hugetlb
  87. [    0.002349] Initializing cgroup subsys pids
  88. [    0.002389] ftrace: allocating 43531 entries in 171 pages
  89. [    0.106481] sched-energy: Sched-energy-costs installed from DT
  90. [    0.106497] CPU0: update cpu_capacity 401
  91. [    0.106550] ASID allocator initialised with 32768 entries
  92. [    0.107415] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
  93. [    0.107801] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
  94. [    0.108999] Detected VIPT I-cache on CPU1
  95. [    0.109027] CPU1: found redistributor 1 region 0:0x00000000fef20000
  96. [    0.109052] CPU1: using LPI pending table @0x000000007d330000
  97. [    0.109095] CPU1: update cpu_capacity 401
  98. [    0.109099] CPU1: Booted secondary processor [410fd034]
  99. [    0.109675] Detected VIPT I-cache on CPU2
  100. [    0.109697] CPU2: found redistributor 2 region 0:0x00000000fef40000
  101. [    0.109720] CPU2: using LPI pending table @0x000000007d350000
  102. [    0.109747] CPU2: update cpu_capacity 401
  103. [    0.109751] CPU2: Booted secondary processor [410fd034]
  104. [    0.110258] Detected VIPT I-cache on CPU3
  105. [    0.110278] CPU3: found redistributor 3 region 0:0x00000000fef60000
  106. [    0.110301] CPU3: using LPI pending table @0x000000007d390000
  107. [    0.110326] CPU3: update cpu_capacity 401
  108. [    0.110330] CPU3: Booted secondary processor [410fd034]
  109. [    0.110854] Detected PIPT I-cache on CPU4
  110. [    0.110879] CPU4: found redistributor 100 region 0:0x00000000fef80000
  111. [    0.110914] CPU4: using LPI pending table @0x000000007d3e0000
  112. [    0.110950] CPU4: update cpu_capacity 1024
  113. [    0.110953] CPU4: Booted secondary processor [410fd082]
  114. [    0.111492] Detected PIPT I-cache on CPU5
  115. [    0.111511] CPU5: found redistributor 101 region 0:0x00000000fefa0000
  116. [    0.111544] CPU5: using LPI pending table @0x000000007c810000
  117. [    0.111571] CPU5: update cpu_capacity 1024
  118. [    0.111574] CPU5: Booted secondary processor [410fd082]
  119. [    0.111656] Brought up 6 CPUs
  120. [    0.111738] SMP: Total of 6 processors activated.
  121. [    0.111748] CPU features: detected feature: GIC system register CPU interface
  122. [    0.111761] CPU: All CPU(s) started at EL2
  123. [    0.111803] alternatives: patching kernel code
  124. [    0.113151] devtmpfs: initialized
  125. [    0.128484] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  126. [    0.128505] futex hash table entries: 2048 (order: 5, 131072 bytes)
  127. [    0.128991] xor: measuring software checksum speed
  128. [    0.165529]    8regs     :  2874.000 MB/sec
  129. [    0.205589]    8regs_prefetch:  2570.000 MB/sec
  130. [    0.245648]    32regs    :  3242.000 MB/sec
  131. [    0.285708]    32regs_prefetch:  2864.000 MB/sec
  132. [    0.285715] xor: using function: 32regs (3242.000 MB/sec)
  133. [    0.285737] pinctrl core: initialized pinctrl subsystem
  134. [    0.285963] regulator-dummy: no parameters
  135. [    0.286503] NET: Registered protocol family 16
  136. [    0.299541] cpuidle: using governor ladder
  137. [    0.311564] cpuidle: using governor menu
  138. [    0.311590] Registered FIQ tty driver
  139. [    0.311884] vdso: 2 pages (1 code @ ffffff8008ba6000, 1 data @ ffffff80090d4000)
  140. [    0.311910] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  141. [    0.312712] DMA: preallocated 2048 KiB pool for atomic allocations
  142. [    0.327275] gpiochip_add_data: registered GPIOs 0 to 31 on device: gpio0
  143. [    0.327352] gpiochip_add_data: registered GPIOs 32 to 63 on device: gpio1
  144. [    0.327430] gpiochip_add_data: registered GPIOs 64 to 95 on device: gpio2
  145. [    0.327503] gpiochip_add_data: registered GPIOs 96 to 127 on device: gpio3
  146. [    0.327587] gpiochip_add_data: registered GPIOs 128 to 159 on device: gpio4
  147. [    0.417922] raid6: int64x1  gen()   452 MB/s
  148. [    0.486050] raid6: int64x1  xor()   400 MB/s
  149. [    0.554130] raid6: int64x2  gen()   785 MB/s
  150. [    0.622229] raid6: int64x2  xor()   601 MB/s
  151. [    0.690339] raid6: int64x4  gen()  1127 MB/s
  152. [    0.758438] raid6: int64x4  xor()   667 MB/s
  153. [    0.826561] raid6: int64x8  gen()   866 MB/s
  154. [    0.894634] raid6: int64x8  xor()   626 MB/s
  155. [    0.962736] raid6: neonx1   gen()   911 MB/s
  156. [    1.030828] raid6: neonx1   xor()   657 MB/s
  157. [    1.098929] raid6: neonx2   gen()  1574 MB/s
  158. [    1.167028] raid6: neonx2   xor()   995 MB/s
  159. [    1.235111] raid6: neonx4   gen()  2067 MB/s
  160. [    1.303212] raid6: neonx4   xor()  1220 MB/s
  161. [    1.371318] raid6: neonx8   gen()  1694 MB/s
  162. [    1.439419] raid6: neonx8   xor()  1273 MB/s
  163. [    1.439425] raid6: using algorithm neonx4 gen() 2067 MB/s
  164. [    1.439431] raid6: .... xor() 1220 MB/s, rmw enabled
  165. [    1.439436] raid6: using intx1 recovery algorithm
  166. [    1.440301] of_get_named_gpiod_flags: parsed 'rockchip,power-ctrl' property of node '/rockchip-suspend[0]' - status (0)
  167. [    1.440342] of_get_named_gpiod_flags: parsed 'rockchip,power-ctrl' property of node '/rockchip-suspend[1]' - status (0)
  168. [    1.440593] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/dc-12v[0]'
  169. [    1.440615] dc_12v: 12000 mV
  170. [    1.440783] reg-fixed-voltage dc-12v: dc_12v supplying 12000000uV
  171. [    1.440957] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc3v3-pcie-regulator[0]' - status (0)
  172. [    1.441005] reg-fixed-voltage vcc3v3-pcie-regulator: Looking up vin-supply from device tree
  173. [    1.441043] vcc3v3_pcie: supplied by dc_12v
  174. [    1.441051] dc_12v: could not add device link regulator.2 err -2
  175. [    1.441091] vcc3v3_pcie: 3300 mV
  176. [    1.441241] reg-fixed-voltage vcc3v3-pcie-regulator: vcc3v3_pcie supplying 3300000uV
  177. [    1.441295] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc1v8-s0[0]'
  178. [    1.441311] vcc1v8_s0: 1800 mV
  179. [    1.441469] reg-fixed-voltage vcc1v8-s0: vcc1v8_s0 supplying 1800000uV
  180. [    1.441520] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-sys[0]'
  181. [    1.441539] reg-fixed-voltage vcc-sys: Looking up vin-supply from device tree
  182. [    1.441575] vcc_sys: supplied by dc_12v
  183. [    1.441583] dc_12v: could not add device link regulator.4 err -2
  184. [    1.441609] vcc_sys: 5000 mV
  185. [    1.441751] reg-fixed-voltage vcc-sys: vcc_sys supplying 5000000uV
  186. [    1.441801] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc-phy-regulator[0]'
  187. [    1.441816] vcc_phy: no parameters
  188. [    1.441969] reg-fixed-voltage vcc-phy-regulator: vcc_phy supplying 0uV
  189. [    1.442020] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/vcc3v3-sys[0]'
  190. [    1.442036] reg-fixed-voltage vcc3v3-sys: Looking up vin-supply from device tree
  191. [    1.442073] vcc3v3_sys: supplied by vcc_sys
  192. [    1.442080] vcc_sys: could not add device link regulator.6 err -2
  193. [    1.442106] vcc3v3_sys: 3300 mV
  194. [    1.442249] reg-fixed-voltage vcc3v3-sys: vcc3v3_sys supplying 3300000uV
  195. [    1.442379] of_get_named_gpiod_flags: parsed 'gpio' property of node '/vcc5v0-host-regulator[0]' - status (0)
  196. [    1.442423] vcc5v0_host: no parameters
  197. [    1.442589] reg-fixed-voltage vcc5v0-host-regulator: vcc5v0_host supplying 0uV
  198. [    1.443200] iommu: Adding device ff8f0000.vop to group 0
  199. [    1.443279] platform ff8f0000.vop: iommu /iommu@ff8f3f00 not found
  200. [    1.443285] iommu: Removing device ff8f0000.vop from group 0
  201. [    1.443343] iommu: Adding device ff900000.vop to group 0
  202. [    1.444567] SCSI subsystem initialized
  203. [    1.444720] libata version 3.00 loaded.
  204. [    1.444929] usbcore: registered new interface driver usbfs
  205. [    1.444975] usbcore: registered new interface driver hub
  206. [    1.445053] usbcore: registered new device driver usb
  207. [    1.445158] media: Linux media interface: v0.10
  208. [    1.445197] Linux video capture interface: v2.00
  209. [    1.445263] pps_core: LinuxPPS API ver. 1 registered
  210. [    1.445270] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  211. [    1.445289] PTP clock support registered
  212. [    1.446325] Advanced Linux Sound Architecture Driver Initialized.
  213. [    1.447107] NetLabel: Initializing
  214. [    1.447114] NetLabel:  domain hash size = 128
  215. [    1.447120] NetLabel:  protocols = UNLABELED CIPSOv4
  216. [    1.447152] NetLabel:  unlabeled traffic allowed by default
  217. [    1.447887] clocksource: Switched to clocksource arch_sys_counter
  218. [    1.500906] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
  219. [    1.501023] NET: Registered protocol family 2
  220. [    1.501475] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  221. [    1.501571] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
  222. [    1.501901] TCP: Hash tables configured (established 16384 bind 16384)
  223. [    1.501980] UDP hash table entries: 1024 (order: 4, 98304 bytes)
  224. [    1.502039] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes)
  225. [    1.502308] NET: Registered protocol family 1
  226. [    1.502604] RPC: Registered named UNIX socket transport module.
  227. [    1.502612] RPC: Registered udp transport module.
  228. [    1.502617] RPC: Registered tcp transport module.
  229. [    1.502623] RPC: Registered tcp NFSv4.1 backchannel transport module.
  230. [    1.502648] PCI: CLS 0 bytes, default 64
  231. [    1.502809] Trying to unpack rootfs image as initramfs...
  232. [    1.710946] Freeing initrd memory: 4136K
  233. [    1.711426] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  234. [    1.711516] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
  235. [    1.712630] kvm [1]: 8-bit VMID
  236. [    1.712638] kvm [1]: Hyp mode initialized successfully
  237. [    1.712764] kvm [1]: interrupt-controller@fff20000 IRQ10
  238. [    1.712952] kvm [1]: timer IRQ12
  239. [    1.715983] audit: initializing netlink subsys (disabled)
  240. [    1.716019] audit: type=2000 audit(1.652:1): initialized
  241. [    1.716412] Initialise system trusted keyring
  242. [    1.716792] HugeTLB registered 2 MB page size, pre-allocated 0 pages
  243. [    1.724083] VFS: Disk quotas dquot_6.6.0
  244. [    1.724237] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  245. [    1.725636] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  246. [    1.726870] NFS: Registering the id_resolver key type
  247. [    1.726894] Key type id_resolver registered
  248. [    1.726901] Key type id_legacy registered
  249. [    1.726922] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  250. [    1.726943] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  251. [    1.727575] fuse init (API version 7.23)
  252. [    1.728316] JFS: nTxBlock = 8192, nTxLock = 65536
  253. [    1.733639] SGI XFS with ACLs, security attributes, realtime, no debug enabled
  254. [    1.735275] Key type big_key registered
  255. [    1.735366]
  256.                TEE Core Framework initialization (ver 1:0.1)
  257. [    1.735391] TEE armv7 Driver initialization
  258. [    1.735787] tz_tee_probe: name="armv7sec", id=0, pdev_name="armv7sec.0"
  259. [    1.735798] TEE core: Alloc the misc device "opteearmtz00" (id=0)
  260. [    1.736008] TEE Core: Register the misc device "opteearmtz00" (id=0,minor=62)
  261. [    1.739912] NET: Registered protocol family 38
  262. [    1.739940] Key type asymmetric registered
  263. [    1.739950] Asymmetric key parser 'x509' registered
  264. [    1.740125] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
  265. [    1.740271] io scheduler noop registered
  266. [    1.740284] io scheduler deadline registered (default)
  267. [    1.740321] io scheduler cfq registered
  268. [    1.741202] phy phy-ff770000.syscon:usb2-phy@e460.0: Looking up phy-supply from device tree
  269. [    1.741293] vcc5v0_host: could not add device link phy-ff770000.syscon:usb2-phy@e460.0 err -2
  270. [    1.741579] phy phy-ff770000.syscon:usb2-phy@e460.1: Looking up phy-supply from device tree
  271. [    1.741591] phy phy-ff770000.syscon:usb2-phy@e460.1: Looking up phy-supply property in node /syscon@ff770000/usb2-phy@e460/otg-port failed
  272. [    1.741811] phy phy-ff770000.syscon:usb2-phy@e460.1: Looking up vbus-supply from device tree
  273. [    1.741822] phy phy-ff770000.syscon:usb2-phy@e460.1: Looking up vbus-supply property in node /syscon@ff770000/usb2-phy@e460/otg-port failed
  274. [    1.741836] phy phy-ff770000.syscon:usb2-phy@e460.1: Failed to get VBUS supply regulator
  275. [    1.742817] phy phy-ff770000.syscon:phy@f780.2: Looking up phy-supply from device tree
  276. [    1.742828] phy phy-ff770000.syscon:phy@f780.2: Looking up phy-supply property in node /syscon@ff770000/phy@f780 failed
  277. [    1.743846] phy phy-ff800000.phy.3: Looking up phy-supply from device tree
  278. [    1.743857] phy phy-ff800000.phy.3: Looking up phy-supply property in node /phy@ff800000/dp-port failed
  279. [    1.744003] phy phy-ff800000.phy.4: Looking up phy-supply from device tree
  280. [    1.744013] phy phy-ff800000.phy.4: Looking up phy-supply property in node /phy@ff800000/usb3-port failed
  281. [    1.744363] phy phy-pcie-phy.5: Looking up phy-supply from device tree
  282. [    1.744373] phy phy-pcie-phy.5: Looking up phy-supply property in node /pcie-phy failed
  283. [    1.746241] rockchip-pcie f8000000.pcie: GPIO lookup for consumer ep
  284. [    1.746250] rockchip-pcie f8000000.pcie: using device tree for GPIO lookup
  285. [    1.746277] of_get_named_gpiod_flags: parsed 'ep-gpios' property of node '/pcie@f8000000[0]' - status (0)
  286. [    1.746515] rockchip-pcie f8000000.pcie: Looking up vpcie3v3-supply from device tree
  287. [    1.746595] rockchip-pcie f8000000.pcie: Looking up vpcie1v8-supply from device tree
  288. [    1.746606] rockchip-pcie f8000000.pcie: Looking up vpcie1v8-supply property in node /pcie@f8000000 failed
  289. [    1.746620] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
  290. [    1.746628] rockchip-pcie f8000000.pcie: Looking up vpcie0v9-supply from device tree
  291. [    1.746637] rockchip-pcie f8000000.pcie: Looking up vpcie0v9-supply property in node /pcie@f8000000 failed
  292. [    1.746649] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
  293. [    1.767926] rockchip-pcie f8000000.pcie: invalid power supply
  294. [    2.267986] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
  295. [    2.268176] rockchip-pcie: probe of f8000000.pcie failed with error -110
  296. [    2.270501] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
  297. [    2.270516] dma-pl330 ff6d0000.dma-controller:   DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
  298. [    2.272660] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
  299. [    2.272674] dma-pl330 ff6e0000.dma-controller:   DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  300. [    2.273217] pwm-regulator vdd-log: GPIO lookup for consumer enable
  301. [    2.273228] pwm-regulator vdd-log: using device tree for GPIO lookup
  302. [    2.273240] of_get_named_gpiod_flags: can't parse 'enable-gpios' property of node '/vdd-log[0]'
  303. [    2.273250] of_get_named_gpiod_flags: can't parse 'enable-gpio' property of node '/vdd-log[0]'
  304. [    2.273261] pwm-regulator vdd-log: using lookup tables for GPIO lookup
  305. [    2.273271] pwm-regulator vdd-log: lookup for GPIO enable failed
  306. [    2.273312] pwm-regulator vdd-log: Looking up pwm-supply from device tree
  307. [    2.273414] pwm-regulator: supplied by vcc_sys
  308. [    2.273427] vcc_sys: could not add device link regulator.8 err -2
  309. [    2.273516] vdd_log: 800 <--> 1400 mV at 896 mV
  310. [    2.274249] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
  311. [    2.275821] console [ttyS2] disabled
  312. [    2.275862] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 35, base_baud = 1500000) is a 16550A
  313. [    2.276510] console [ttyS2] enabled
  314. [    2.277486] [drm] Initialized drm 1.1.0 20060810
  315. [    2.280789] [drm] Rockchip DRM driver version: v1.0.1
  316. [    2.281290] usbcore: registered new interface driver udl
  317. [    2.282681] Unable to detect cache hierarchy for CPU 0
  318. [    2.283439] brd: module loaded
  319. [    2.288621] loop: module loaded
  320. [    2.288882] lkdtm: No crash points registered, enable through debugfs
  321. [    2.290205] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel
  322. [    2.290217] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel
  323. [    2.290224] rockchip-spi ff1d0000.spi: no high_speed pinctrl state
  324. [    2.290788] m25p80 spi32766.0: gd25q128 (16384 Kbytes)
  325. [    2.290816] 3 ofpart partitions found on MTD device spi32766.0
  326. [    2.290823] Creating 3 MTD partitions on "spi32766.0":
  327. [    2.290832] 0x000000000000-0x0000003f8000 : "loader"
  328. [    2.291652] 0x0000003f8000-0x000000400000 : "env"
  329. [    2.292457] 0x0000007c0000-0x000000800000 : "vendor"
  330. [    2.294727] force_sf_dma_mode is ignored if force_thresh_dma_mode is set.
  331. [    2.294743] rk_gmac-dwmac fe300000.ethernet: Looking up phy-supply from device tree
  332. [    2.294821] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
  333. [    2.294832] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
  334. [    2.294841] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
  335. [    2.294864] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
  336. [    2.295039] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
  337. [    2.295047] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
  338. [    2.300060] rk_gmac-dwmac fe300000.ethernet: init for RGMII
  339. [    2.300187] stmmac - user ID: 0x10, Synopsys ID: 0x35
  340. [    2.300192]  Ring mode enabled
  341. [    2.300198]  DMA HW capability register supported
  342. [    2.300203]  Normal descriptors
  343. [    2.300208]  RX Checksum Offload Engine supported (type 2)
  344. [    2.300213]  Wake-Up On Lan supported
  345. [    2.300250]  Enable RX Mitigation via HW Watchdog Timer
  346. [    2.300347] of_get_named_gpiod_flags: parsed 'snps,reset-gpio' property of node '/ethernet@fe300000[0]' - status (0)
  347. [    2.378004] libphy: stmmac: probed
  348. [    2.378017] eth%d: PHY ID 001cc916 at 0 IRQ POLL (stmmac-0:00) active
  349. [    2.378025] eth%d: PHY ID 001cc916 at 1 IRQ POLL (stmmac-0:01)
  350. [    2.379301] Rockchip WiFi SYS interface (V1.00) ...
  351. [    2.379380] usbcore: registered new interface driver cdc_ether
  352. [    2.379422] usbcore: registered new interface driver rndis_host
  353. [    2.380763] rockchip-dwc3 usb0: failed to get drvdata dwc3
  354. [    2.385578] rockchip-dwc3 usb1: fail to get drvdata hcd
  355. [    2.387127] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  356. [    2.387144] ehci-pci: EHCI PCI platform driver
  357. [    2.387225] ehci-platform: EHCI generic platform driver
  358. [    2.391282] ehci-platform fe3c0000.usb: EHCI Host Controller
  359. [    2.391564] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1
  360. [    2.391683] ehci-platform fe3c0000.usb: irq 29, io mem 0xfe3c0000
  361. [    2.399949] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
  362. [    2.400138] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  363. [    2.400151] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  364. [    2.400162] usb usb1: Product: EHCI Host Controller
  365. [    2.400172] usb usb1: Manufacturer: Linux 4.4.166-rockchip64 ehci_hcd
  366. [    2.400182] usb usb1: SerialNumber: fe3c0000.usb
  367. [    2.400812] hub 1-0:1.0: USB hub found
  368. [    2.400852] hub 1-0:1.0: 1 port detected
  369. [    2.401583] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  370. [    2.401611] ohci-platform: OHCI generic platform driver
  371. [    2.402259] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
  372. [    2.402488] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2
  373. [    2.402602] ohci-platform fe3e0000.usb: irq 30, io mem 0xfe3e0000
  374. [    2.460091] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
  375. [    2.460105] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  376. [    2.460115] usb usb2: Product: Generic Platform OHCI controller
  377. [    2.460126] usb usb2: Manufacturer: Linux 4.4.166-rockchip64 ohci_hcd
  378. [    2.460135] usb usb2: SerialNumber: fe3e0000.usb
  379. [    2.460724] hub 2-0:1.0: USB hub found
  380. [    2.460762] hub 2-0:1.0: 1 port detected
  381. [    2.461971] usbcore: registered new interface driver cdc_acm
  382. [    2.461979] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  383. [    2.462038] usbcore: registered new interface driver cdc_wdm
  384. [    2.462148] usbcore: registered new interface driver usbserial
  385. [    2.462191] usbcore: registered new interface driver usbserial_generic
  386. [    2.462229] usbserial: USB Serial support registered for generic
  387. [    2.463551] usbcore: registered new interface driver iforce
  388. [    2.463633] usbcore: registered new interface driver xpad
  389. [    2.464165] usbcore: registered new interface driver usbtouchscreen
  390. [    2.464474] .. rk pwm remotectl v1.1 init
  391. [    2.464801] input: ff420030.pwm as /devices/platform/ff420030.pwm/input/input0
  392. [    2.466100] i2c /dev entries driver
  393. [    2.467171] fan53555-regulator 0-0040: GPIO lookup for consumer vsel
  394. [    2.467182] fan53555-regulator 0-0040: using device tree for GPIO lookup
  395. [    2.467223] of_get_named_gpiod_flags: parsed 'vsel-gpios' property of node '/i2c@ff3c0000/syr827@40[0]' - status (0)
  396. [    2.467626] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
  397. [    2.467650] fan53555-regulator 0-0040: Looking up vin-supply from device tree
  398. [    2.467725] fan53555-reg: supplied by vcc_sys
  399. [    2.467742] vcc_sys: could not add device link regulator.9 err -2
  400. [    2.468944] vdd_cpu_b: 712 <--> 1500 mV at 825 mV
  401. [    2.469686] fan53555-regulator 0-0041: GPIO lookup for consumer vsel
  402. [    2.469697] fan53555-regulator 0-0041: using device tree for GPIO lookup
  403. [    2.469734] of_get_named_gpiod_flags: parsed 'vsel-gpios' property of node '/i2c@ff3c0000/syr828@41[0]' - status (0)
  404. [    2.470098] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
  405. [    2.470117] fan53555-regulator 0-0041: Looking up vin-supply from device tree
  406. [    2.470174] fan53555-reg: supplied by vcc_sys
  407. [    2.470185] vcc_sys: could not add device link regulator.10 err -2
  408. [    2.471481] vdd_gpu: 712 <--> 1500 mV at 1000 mV
  409. [    2.472634] rk808 0-001b: Pmic Chip id: 0x0
  410. [    2.475386] rk808 0-001b: GPIO lookup for consumer dvs
  411. [    2.475398] rk808 0-001b: using device tree for GPIO lookup
  412. [    2.475410] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3c0000/pmic@1b[0]'
  413. [    2.475421] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3c0000/pmic@1b[0]'
  414. [    2.475431] rk808 0-001b: using lookup tables for GPIO lookup
  415. [    2.475442] rk808 0-001b: lookup for GPIO dvs failed
  416. [    2.475453] rk808-regulator rk808-regulator: there is no dvs0 gpio
  417. [    2.475463] rk808 0-001b: GPIO lookup for consumer dvs
  418. [    2.475472] rk808 0-001b: using device tree for GPIO lookup
  419. [    2.475483] of_get_named_gpiod_flags: can't parse 'dvs-gpios' property of node '/i2c@ff3c0000/pmic@1b[1]'
  420. [    2.475493] of_get_named_gpiod_flags: can't parse 'dvs-gpio' property of node '/i2c@ff3c0000/pmic@1b[1]'
  421. [    2.475503] rk808 0-001b: using lookup tables for GPIO lookup
  422. [    2.475512] rk808 0-001b: lookup for GPIO dvs failed
  423. [    2.475522] rk808-regulator rk808-regulator: there is no dvs1 gpio
  424. [    2.475580] rk808 0-001b: Looking up vcc1-supply from device tree
  425. [    2.475651] DCDC_REG1: supplied by vcc_sys
  426. [    2.475662] vcc_sys: could not add device link regulator.11 err -2
  427. [    2.476166] vdd_center: 900 mV
  428. [    2.476498] rk808 0-001b: Looking up vcc2-supply from device tree
  429. [    2.476558] DCDC_REG2: supplied by vcc_sys
  430. [    2.476570] vcc_sys: could not add device link regulator.12 err -2
  431. [    2.476887] vdd_cpu_l: 750 <--> 1350 mV at 850 mV
  432. [    2.477225] rk808 0-001b: Looking up vcc3-supply from device tree
  433. [    2.477281] DCDC_REG3: supplied by vcc_sys
  434. [    2.477292] vcc_sys: could not add device link regulator.13 err -2
  435. [    2.477334] vcc_ddr: at 5000 mV
  436. [    2.477634] rk808 0-001b: Looking up vcc4-supply from device tree
  437. [    2.477685] DCDC_REG4: supplied by vcc_sys
  438. [    2.477696] vcc_sys: could not add device link regulator.14 err -2
  439. [    2.477883] vcc_1v8: 1800 mV
  440. [    2.478217] rk808 0-001b: Looking up vcc6-supply from device tree
  441. [    2.478268] LDO_REG1: supplied by vcc_sys
  442. [    2.478279] vcc_sys: could not add device link regulator.15 err -2
  443. [    2.479138] vcc1v8_dvp: 1800 mV
  444. [    2.479475] rk808 0-001b: Looking up vcc6-supply from device tree
  445. [    2.479525] LDO_REG2: supplied by vcc_sys
  446. [    2.479537] vcc_sys: could not add device link regulator.16 err -2
  447. [    2.480255] vcc3v0_touch: 3000 mV
  448. [    2.480593] rk808 0-001b: Looking up vcc7-supply from device tree
  449. [    2.480644] LDO_REG3: supplied by vcc_sys
  450. [    2.480655] vcc_sys: could not add device link regulator.17 err -2
  451. [    2.481366] vcc1v8_pmu: 1800 mV
  452. [    2.481685] rk808 0-001b: Looking up vcc9-supply from device tree
  453. [    2.481736] LDO_REG4: supplied by vcc_sys
  454. [    2.481747] vcc_sys: could not add device link regulator.18 err -2
  455. [    2.482485] vcc_sd: 1800 <--> 3300 mV at 3300 mV
  456. [    2.482812] rk808 0-001b: Looking up vcc9-supply from device tree
  457. [    2.482862] LDO_REG5: supplied by vcc_sys
  458. [    2.482873] vcc_sys: could not add device link regulator.19 err -2
  459. [    2.483601] vcca3v0_codec: 3000 mV
  460. [    2.483957] rk808 0-001b: Looking up vcc10-supply from device tree
  461. [    2.484009] LDO_REG6: supplied by vcc_sys
  462. [    2.484021] vcc_sys: could not add device link regulator.20 err -2
  463. [    2.484726] vcc_1v5: 1500 mV
  464. [    2.485080] rk808 0-001b: Looking up vcc7-supply from device tree
  465. [    2.485132] LDO_REG7: supplied by vcc_sys
  466. [    2.485143] vcc_sys: could not add device link regulator.21 err -2
  467. [    2.485849] vcca1v8_codec: 1800 mV
  468. [    2.486203] rk808 0-001b: Looking up vcc11-supply from device tree
  469. [    2.486255] LDO_REG8: supplied by vcc_sys
  470. [    2.486266] vcc_sys: could not add device link regulator.22 err -2
  471. [    2.486976] vcc_3v0: 3000 mV
  472. [    2.487327] rk808 0-001b: Looking up vcc8-supply from device tree
  473. [    2.487380] SWITCH_REG1: supplied by vcc3v3_sys
  474. [    2.487392] vcc3v3_sys: could not add device link regulator.23 err -2
  475. [    2.487435] vcc3v3_s3: at 3300 mV
  476. [    2.487757] rk808 0-001b: Looking up vcc12-supply from device tree
  477. [    2.487809] SWITCH_REG2: supplied by vcc3v3_sys
  478. [    2.487825] vcc3v3_sys: could not add device link regulator.24 err -2
  479. [    2.487866] vcc3v3_s0: at 3300 mV
  480. [    2.491580] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
  481. [    2.492057] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff80093dc000
  482. [    2.492909] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff80093de000
  483. [    2.493952] fusb302 4-0022: GPIO lookup for consumer int-n
  484. [    2.493964] fusb302 4-0022: using device tree for GPIO lookup
  485. [    2.494005] of_get_named_gpiod_flags: parsed 'int-n-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' - status (0)
  486. [    2.494038] fusb302 4-0022: GPIO lookup for consumer vbus-5v
  487. [    2.494048] fusb302 4-0022: using device tree for GPIO lookup
  488. [    2.494081] of_get_named_gpiod_flags: parsed 'vbus-5v-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]' - status (0)
  489. [    2.494111] fusb302 4-0022: GPIO lookup for consumer vbus-other
  490. [    2.494121] fusb302 4-0022: using device tree for GPIO lookup
  491. [    2.494132] of_get_named_gpiod_flags: can't parse 'vbus-other-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]'
  492. [    2.494143] of_get_named_gpiod_flags: can't parse 'vbus-other-gpio' property of node '/i2c@ff3d0000/fusb30x@22[0]'
  493. [    2.494153] fusb302 4-0022: using lookup tables for GPIO lookup
  494. [    2.494163] fusb302 4-0022: lookup for GPIO vbus-other failed
  495. [    2.494174] fusb302 4-0022: GPIO lookup for consumer discharge
  496. [    2.494183] fusb302 4-0022: using device tree for GPIO lookup
  497. [    2.494193] of_get_named_gpiod_flags: can't parse 'discharge-gpios' property of node '/i2c@ff3d0000/fusb30x@22[0]'
  498. [    2.494204] of_get_named_gpiod_flags: can't parse 'discharge-gpio' property of node '/i2c@ff3d0000/fusb30x@22[0]'
  499. [    2.494213] fusb302 4-0022: using lookup tables for GPIO lookup
  500. [    2.494223] fusb302 4-0022: lookup for GPIO discharge failed
  501. [    2.494440] fusb302 4-0022: Can't get property of role, set role to default DRP
  502. [    2.502859] fusb302 4-0022: port 0 probe success with role ROLE_MODE_DRP, try_role ROLE_MODE_NONE
  503. [    2.502897] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff80093f2000
  504. [    2.504413] IR NEC protocol handler initialized
  505. [    2.504427] IR RC5(x/sz) protocol handler initialized
  506. [    2.504441] IR RC6 protocol handler initialized
  507. [    2.504454] IR JVC protocol handler initialized
  508. [    2.504467] IR Sony protocol handler initialized
  509. [    2.504480] IR SANYO protocol handler initialized
  510. [    2.504493] IR Sharp protocol handler initialized
  511. [    2.504507] IR MCE Keyboard/mouse protocol handler initialized
  512. [    2.504520] IR XMP protocol handler initialized
  513. [    2.504602] usbcore: registered new interface driver redrat3
  514. [    2.504660] usbcore: registered new interface driver iguanair
  515. [    2.505168] usbcore: registered new interface driver uvcvideo
  516. [    2.505175] USB Video Class driver (1.1.1)
  517. [    2.505895] rockchip-iodomain ff320000.syscon:io-domains: Looking up pmu1830-supply from device tree
  518. [    2.506188] rockchip-iodomain ff770000.syscon:io-domains: Looking up bt656-supply from device tree
  519. [    2.506381] rockchip-iodomain ff770000.syscon:io-domains: Looking up audio-supply from device tree
  520. [    2.506483] rockchip-iodomain ff770000.syscon:io-domains: Looking up sdmmc-supply from device tree
  521. [    2.506559] rockchip-iodomain ff770000.syscon:io-domains: Looking up gpio1830-supply from device tree
  522. [    2.509447] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
  523. [    2.509656] rockchip-thermal ff260000.tsadc: tsadc is probed successfully!
  524. [    2.511113] device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: dm-devel@redhat.com
  525. [    2.511796] cpu cpu0: Failed to get leakage
  526. [    2.511831] cpu cpu0: Looking up cpu-supply from device tree
  527. [    2.511984] cpu cpu0: Failed to get pvtm
  528. [    2.512358] cpu cpu4: Failed to get leakage
  529. [    2.512388] cpu cpu4: Looking up cpu-supply from device tree
  530. [    2.512457] cpu cpu4: Failed to get pvtm
  531. [    2.512759] cpu cpu0: Looking up cpu-supply from device tree
  532. [    2.513152] cpu cpu0: Looking up cpu-supply from device tree
  533. [    2.515846] cpu cpu4: Looking up cpu-supply from device tree
  534. [    2.518483] sdhci: Secure Digital Host Controller Interface driver
  535. [    2.518490] sdhci: Copyright(c) Pierre Ossman
  536. [    2.518498] Synopsys Designware Multimedia Card Interface Driver
  537. [    2.519426] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
  538. [    2.519449] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
  539. [    2.519459] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
  540. [    2.519499] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
  541. [    2.519516] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
  542. [    2.519526] dwmmc_rockchip fe320000.dwmmc: Looking up vmmc-supply from device tree
  543. [    2.519534] dwmmc_rockchip fe320000.dwmmc: Looking up vmmc-supply property in node /dwmmc@fe320000 failed
  544. [    2.519561] dwmmc_rockchip fe320000.dwmmc: Looking up vqmmc-supply from device tree
  545. [    2.519621] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
  546. [    2.519639] dwmmc_rockchip fe320000.dwmmc: GPIO lookup for consumer cd
  547. [    2.519645] dwmmc_rockchip fe320000.dwmmc: using device tree for GPIO lookup
  548. [    2.519652] of_get_named_gpiod_flags: can't parse 'cd-gpios' property of node '/dwmmc@fe320000[0]'
  549. [    2.519659] of_get_named_gpiod_flags: can't parse 'cd-gpio' property of node '/dwmmc@fe320000[0]'
  550. [    2.519665] dwmmc_rockchip fe320000.dwmmc: using lookup tables for GPIO lookup
  551. [    2.519671] dwmmc_rockchip fe320000.dwmmc: lookup for GPIO cd failed
  552. [    2.519679] dwmmc_rockchip fe320000.dwmmc: GPIO lookup for consumer wp
  553. [    2.519684] dwmmc_rockchip fe320000.dwmmc: using device tree for GPIO lookup
  554. [    2.519691] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/dwmmc@fe320000[0]'
  555. [    2.519697] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/dwmmc@fe320000[0]'
  556. [    2.519702] dwmmc_rockchip fe320000.dwmmc: using lookup tables for GPIO lookup
  557. [    2.519708] dwmmc_rockchip fe320000.dwmmc: lookup for GPIO wp failed
  558. [    2.519835] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
  559. [    2.519844] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3300000 done
  560. [    2.531928] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  561. [    2.548952] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
  562. [    2.551340] sdhci-pltfm: SDHCI platform and OF driver helper
  563. [    2.551813] sdhci-arasan fe330000.sdhci: GPIO lookup for consumer wp
  564. [    2.551820] sdhci-arasan fe330000.sdhci: using device tree for GPIO lookup
  565. [    2.551827] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/sdhci@fe330000[0]'
  566. [    2.551833] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/sdhci@fe330000[0]'
  567. [    2.551839] sdhci-arasan fe330000.sdhci: using lookup tables for GPIO lookup
  568. [    2.551846] sdhci-arasan fe330000.sdhci: lookup for GPIO wp failed
  569. [    2.552970] sdhci-arasan fe330000.sdhci: Looking up vmmc-supply from device tree
  570. [    2.552978] sdhci-arasan fe330000.sdhci: Looking up vmmc-supply property in node /sdhci@fe330000 failed
  571. [    2.553002] sdhci-arasan fe330000.sdhci: Looking up vqmmc-supply from device tree
  572. [    2.553010] sdhci-arasan fe330000.sdhci: Looking up vqmmc-supply property in node /sdhci@fe330000 failed
  573. [    2.553023] sdhci-arasan fe330000.sdhci: No vmmc regulator found
  574. [    2.553028] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
  575. [    2.587943] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
  576. [    2.589106] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/work-led[0]' - status (0)
  577. [    2.589371] of_get_named_gpiod_flags: parsed 'gpios' property of node '/leds/diy-led[0]' - status (0)
  578. [    2.589830] hidraw: raw HID events driver (C) Jiri Kosina
  579. [    2.590493] usbcore: registered new interface driver usbhid
  580. [    2.590503] usbhid: USB HID core driver
  581. [    2.591095] ashmem: initialized
  582. [    2.593608] rockchip-saradc ff100000.saradc: Looking up vref-supply from device tree
  583. [    2.593630] rockchip-saradc ff100000.saradc: Looking up vref-supply property in node /saradc@ff100000 failed
  584. [    2.593674] ff100000.saradc supply vref not found, using dummy regulator
  585. [    2.595971] usbcore: registered new interface driver snd-usb-audio
  586. [    2.596986] of_get_named_gpiod_flags: can't parse 'spk-con-gpio' property of node '/i2c@ff110000/es8316@10[0]'
  587. [    2.597001] es8316 1-0010: Can not read property spk_ctl_gpio
  588. [    2.597041] of_get_named_gpiod_flags: parsed 'hp-det-gpio' property of node '/i2c@ff110000/es8316@10[0]' - status (0)
  589. [    2.602672] u32 classifier
  590. [    2.602912] Initializing XFRM netlink socket
  591. [    2.603677] NET: Registered protocol family 10
  592. [    2.605511] [WLAN_RFKILL]: Enter rfkill_wlan_init
  593. [    2.605862] [WLAN_RFKILL]: Enter rfkill_wlan_probe
  594. [    2.605918] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6354
  595. [    2.605928] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
  596. [    2.605938] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
  597. [    2.605949] of_get_named_gpiod_flags: can't parse 'WIFI,poweren_gpio' property of node '/wireless-wlan[0]'
  598. [    2.605960] of_get_named_gpiod_flags: can't parse 'WIFI,vbat_gpio' property of node '/wireless-wlan[0]'
  599. [    2.605970] of_get_named_gpiod_flags: can't parse 'WIFI,reset_gpio' property of node '/wireless-wlan[0]'
  600. [    2.606014] of_get_named_gpiod_flags: parsed 'WIFI,host_wake_irq' property of node '/wireless-wlan[0]' - status (0)
  601. [    2.606024] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 3, flags = 0.
  602. [    2.606037] [WLAN_RFKILL]: wlan_platdata_parse_dt: The ref_wifi_clk not found !
  603. [    2.606045] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
  604. [    2.606056] [WLAN_RFKILL]: Exit rfkill_wlan_probe
  605. [    2.606130] [BT_RFKILL]: Enter rfkill_rk_init
  606. [    2.606578] of_get_named_gpiod_flags: parsed 'uart_rts_gpios' property of node '/wireless-bluetooth[0]' - status (0)
  607. [    2.606588] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 83.
  608. [    2.606606] of_get_named_gpiod_flags: can't parse 'BT,power_gpio' property of node '/wireless-bluetooth[0]'
  609. [    2.606637] of_get_named_gpiod_flags: parsed 'BT,reset_gpio' property of node '/wireless-bluetooth[0]' - status (0)
  610. [    2.606646] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 9.
  611. [    2.606676] of_get_named_gpiod_flags: parsed 'BT,wake_gpio' property of node '/wireless-bluetooth[0]' - status (0)
  612. [    2.606684] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 91.
  613. [    2.606714] of_get_named_gpiod_flags: parsed 'BT,wake_host_irq' property of node '/wireless-bluetooth[0]' - status (0)
  614. [    2.606723] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 4.
  615. [    2.607378] [BT_RFKILL]: Request irq for bt wakeup host
  616. [    2.607453] [BT_RFKILL]: ** disable irq
  617. [    2.607651] [BT_RFKILL]: bt_default device registered.
  618. [    2.607771] Key type dns_resolver registered
  619. [    2.607800] Error: Driver 'ov4689' is already registered, aborting...
  620. [    2.607820] Error: Driver 'ov13850' is already registered, aborting...
  621. [    2.608771] Registered cp15_barrier emulation handler
  622. [    2.608959] Registered setend emulation handler
  623. [    2.611554] registered taskstats version 1
  624. [    2.611584] Loading compiled-in X.509 certificates
  625. [    2.614595] Btrfs loaded, integrity-checker=on
  626. [    2.614697] BTRFS: selftest: Running btrfs free space cache tests
  627. [    2.614729] BTRFS: selftest: Running extent only tests
  628. [    2.614751] BTRFS: selftest: Running bitmap only tests
  629. [    2.614775] BTRFS: selftest: Running bitmap and extent tests
  630. [    2.614809] BTRFS: selftest: Running space stealing from bitmap to extent
  631. [    2.615780] BTRFS: selftest: Free space cache tests finished
  632. [    2.615787] BTRFS: selftest: Running extent buffer operation tests
  633. [    2.615793] BTRFS: selftest: Running btrfs_split_item tests
  634. [    2.615838] BTRFS: selftest: Running find delalloc tests
  635. [    2.618827] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
  636. [    2.618922] mmc0: new high speed SDHC card at address aaaa
  637. [    2.620155] mmcblk0: mmc0:aaaa SC16G 14.8 GiB
  638. [    2.623189]  mmcblk0: p1
  639. [    2.959707] BTRFS: selftest: Running btrfs_get_extent tests
  640. [    2.959832] BTRFS: selftest: Running hole first btrfs_get_extent test
  641. [    2.959850] BTRFS: selftest: Running outstanding_extents tests
  642. [    2.959923] BTRFS: selftest: Running qgroup tests
  643. [    2.959926] BTRFS: selftest: Qgroup basic add
  644. [    2.959971] BTRFS: selftest: Qgroup multiple refs test
  645. [    2.993243] Key type encrypted registered
  646. [    2.993765] phy phy-ff770000.syscon:usb2-phy@e450.6: Looking up phy-supply from device tree
  647. [    2.993819] vcc5v0_host: could not add device link phy-ff770000.syscon:usb2-phy@e450.6 err -2
  648. [    2.994170] phy phy-ff770000.syscon:usb2-phy@e450.7: Looking up phy-supply from device tree
  649. [    2.994176] phy phy-ff770000.syscon:usb2-phy@e450.7: Looking up phy-supply property in node /syscon@ff770000/usb2-phy@e450/otg-port failed
  650. [    2.994457] phy phy-ff770000.syscon:usb2-phy@e450.7: Looking up vbus-supply from device tree
  651. [    2.994463] phy phy-ff770000.syscon:usb2-phy@e450.7: Looking up vbus-supply property in node /syscon@ff770000/usb2-phy@e450/otg-port failed
  652. [    2.994474] phy phy-ff770000.syscon:usb2-phy@e450.7: Failed to get VBUS supply regulator
  653. [    2.994918] phy phy-ff7c0000.phy.8: Looking up phy-supply from device tree
  654. [    2.994925] phy phy-ff7c0000.phy.8: Looking up phy-supply property in node /phy@ff7c0000/dp-port failed
  655. [    2.994986] phy phy-ff7c0000.phy.9: Looking up phy-supply from device tree
  656. [    2.994991] phy phy-ff7c0000.phy.9: Looking up phy-supply property in node /phy@ff7c0000/usb3-port failed
  657. [    2.995295] rockchip-drm display-subsystem: devfreq is not set
  658. [    2.995471] rockchip-vop ff900000.vop: missing rockchip,grf property
  659. [    2.995618] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008c70018)
  660. [    2.995643] rockchip-vop ff8f0000.vop: missing rockchip,grf property
  661. [    2.995745] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008c70018)
  662. [    2.996100] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
  663. [    2.996121] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
  664. [    2.996186] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
  665. [    2.997402] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffff8008c66b40)
  666. [    2.997705] i2c i2c-10: of_i2c: modalias failure on /dp@fec00000/ports
  667. [    2.997872] rockchip-drm display-subsystem: bound fec00000.dp (ops 0xffffff8008c67ae0)
  668. [    2.997877] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  669. [    2.997880] [drm] No driver support for vblank timestamp query.
  670. [    2.997993] rockchip-drm display-subsystem: failed to parse loader memory
  671. [    2.998055] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
  672. [    3.145840] rockchip-vop ff900000.vop: [drm:vop_crtc_enable] Update mode to 1920x1080p60, type: 11
  673. [    3.280836] Console: switching to colour frame buffer device 240x67
  674. [    3.380065] rockchip-drm display-subsystem: fb0:  frame buffer device
  675. [    3.398189] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
  676. [    3.398440] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 3
  677. [    3.398564] xhci-hcd xhci-hcd.6.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
  678. [    3.398614] xhci-hcd xhci-hcd.6.auto: irq 223, io mem 0xfe800000
  679. [    3.398761] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  680. [    3.398770] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  681. [    3.398778] usb usb3: Product: xHCI Host Controller
  682. [    3.398785] usb usb3: Manufacturer: Linux 4.4.166-rockchip64 xhci-hcd
  683. [    3.398792] usb usb3: SerialNumber: xhci-hcd.6.auto
  684. [    3.399322] hub 3-0:1.0: USB hub found
  685. [    3.399350] hub 3-0:1.0: 1 port detected
  686. [    3.399615] xhci-hcd xhci-hcd.6.auto: xHCI Host Controller
  687. [    3.399818] xhci-hcd xhci-hcd.6.auto: new USB bus registered, assigned bus number 4
  688. [    3.399922] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  689. [    3.400247] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  690. [    3.400258] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  691. [    3.400266] usb usb4: Product: xHCI Host Controller
  692. [    3.400275] usb usb4: Manufacturer: Linux 4.4.166-rockchip64 xhci-hcd
  693. [    3.400283] usb usb4: SerialNumber: xhci-hcd.6.auto
  694. [    3.400968] hub 4-0:1.0: USB hub found
  695. [    3.400999] hub 4-0:1.0: 1 port detected
  696. [    3.402471] xhci-hcd xhci-hcd.6.auto: remove, state 1
  697. [    3.402496] usb usb4: USB disconnect, device number 1
  698. [    3.426359] xhci-hcd xhci-hcd.6.auto: Host not halted after 16000 microseconds.
  699. [    3.426369] xhci-hcd xhci-hcd.6.auto: Host controller not halted, aborting reset.
  700. [    3.426444] xhci-hcd xhci-hcd.6.auto: USB bus 4 deregistered
  701. [    3.426872] xhci-hcd xhci-hcd.6.auto: remove, state 1
  702. [    3.426890] usb usb3: USB disconnect, device number 1
  703. [    3.427479] xhci-hcd xhci-hcd.6.auto: USB bus 3 deregistered
  704. [    3.432552] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
  705. [    3.432991] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 3
  706. [    3.433131] xhci-hcd xhci-hcd.7.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
  707. [    3.433184] xhci-hcd xhci-hcd.7.auto: irq 224, io mem 0xfe900000
  708. [    3.433351] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
  709. [    3.433362] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  710. [    3.433370] usb usb3: Product: xHCI Host Controller
  711. [    3.433379] usb usb3: Manufacturer: Linux 4.4.166-rockchip64 xhci-hcd
  712. [    3.433387] usb usb3: SerialNumber: xhci-hcd.7.auto
  713. [    3.434068] hub 3-0:1.0: USB hub found
  714. [    3.434105] hub 3-0:1.0: 1 port detected
  715. [    3.434412] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
  716. [    3.434765] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 4
  717. [    3.434834] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
  718. [    3.434944] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
  719. [    3.434954] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  720. [    3.434963] usb usb4: Product: xHCI Host Controller
  721. [    3.434971] usb usb4: Manufacturer: Linux 4.4.166-rockchip64 xhci-hcd
  722. [    3.434979] usb usb4: SerialNumber: xhci-hcd.7.auto
  723. [    3.435541] hub 4-0:1.0: USB hub found
  724. [    3.435571] hub 4-0:1.0: 1 port detected
  725. [    3.439934] ehci-platform fe380000.usb: EHCI Host Controller
  726. [    3.440350] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 5
  727. [    3.440462] ehci-platform fe380000.usb: irq 27, io mem 0xfe380000
  728. [    3.452135] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
  729. [    3.452325] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
  730. [    3.452334] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  731. [    3.452342] usb usb5: Product: EHCI Host Controller
  732. [    3.452350] usb usb5: Manufacturer: Linux 4.4.166-rockchip64 ehci_hcd
  733. [    3.452356] usb usb5: SerialNumber: fe380000.usb
  734. [    3.453035] hub 5-0:1.0: USB hub found
  735. [    3.453062] hub 5-0:1.0: 1 port detected
  736. [    3.453912] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
  737. [    3.454185] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 6
  738. [    3.454289] ohci-platform fe3a0000.usb: irq 28, io mem 0xfe3a0000
  739. [    3.512557] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
  740. [    3.512589] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  741. [    3.512611] usb usb6: Product: Generic Platform OHCI controller
  742. [    3.512632] usb usb6: Manufacturer: Linux 4.4.166-rockchip64 ohci_hcd
  743. [    3.512652] usb usb6: SerialNumber: fe3a0000.usb
  744. [    3.514153] hub 6-0:1.0: USB hub found
  745. [    3.514232] hub 6-0:1.0: 1 port detected
  746. [    3.516541] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/es8316-sound[0]'
  747. [    3.516554] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/es8316-sound[0]'
  748. [    3.623568] asoc-simple-card es8316-sound: ES8316 HiFi <-> ff890000.i2s mapping ok
  749. [    3.623627] asoc-simple-card es8316-sound: ASoC: no source widget found for MICBIAS1
  750. [    3.623651] asoc-simple-card es8316-sound: ASoC: Failed to add route MICBIAS1 -> direct -> Mic Jack
  751. [    3.623676] asoc-simple-card es8316-sound: ASoC: no sink widget found for IN1P
  752. [    3.623697] asoc-simple-card es8316-sound: ASoC: Failed to add route Mic Jack -> direct -> IN1P
  753. [    3.624474] es8316 1-0010: ASoC: Failed to create Left Hp mixer debugfs file
  754. [    3.624505] es8316 1-0010: ASoC: Failed to create Right Hp mixer debugfs file
  755. [    3.624592] es8316 1-0010: ASoC: Failed to create HPCP L debugfs file
  756. [    3.624656] es8316 1-0010: ASoC: Failed to create HPCP R debugfs file
  757. [    3.624742] es8316 1-0010: ASoC: Failed to create HPVOL L debugfs file
  758. [    3.624804] es8316 1-0010: ASoC: Failed to create HPVOL R debugfs file
  759. [    3.629442] of_get_named_gpiod_flags: can't parse 'simple-audio-card,hp-det-gpio' property of node '/spdif-sound[0]'
  760. [    3.629471] of_get_named_gpiod_flags: can't parse 'simple-audio-card,mic-det-gpio' property of node '/spdif-sound[0]'
  761. [    3.630074] rockchip-spdif ff870000.spdif: Missing dma channel for stream: 0
  762. [    3.630098] rockchip-spdif ff870000.spdif: ASoC: pcm constructor failed: -22
  763. [    3.630121] asoc-simple-card spdif-sound: ASoC: can't create pcm ff870000.spdif-dit-hifi :-22
  764. [    3.630142] asoc-simple-card spdif-sound: ASoC: failed to instantiate card -22
  765. [    3.630538] asoc-simple-card: probe of spdif-sound failed with error -22
  766. [    3.633471] rk808-rtc rk808-rtc: setting system clock to 2018-12-03 15:42:35 UTC (1543851755)
  767. [    3.633530] of_cfs_init
  768. [    3.633597] of_cfs_init: OK
  769. [    3.659103] vcc3v3_pcie: disabling
  770. [    3.659270] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 417; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '', rk_ko_ver is '5', built at '16:25:22', on 'Dec  3 2018'.
  771. [    3.659805] Mali: Mali device driver loaded
  772. [    3.660247] of_get_named_gpiod_flags: parsed 'gpios' property of node '/rockchip-key/power-key[0]' - status (0)
  773. [    3.660275] of_get_named_gpiod_flags: parsed 'gpios' property of node '/rockchip-key/power-key[0]' - status (0)
  774. [    3.660467] input: rk29-keypad as /devices/platform/rockchip-key/input/input1
  775. [    3.661540] ALSA device list:
  776. [    3.661548]   #0: rockchip,es8316-codec
  777. [    3.662177] Freeing unused kernel memory: 1216K
  778. [    3.711079] random: systemd-udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
  779. [    3.711630] random: systemd-udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
  780. [    3.711722] random: systemd-udevd: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
  781. [    3.716989] random: udevadm: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
  782. [    3.717238] random: udevadm: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
  783. [    3.717320] random: udevadm: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
  784. [    3.717459] random: udevadm: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
  785. [    3.717906] random: udevadm: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
  786. [    3.718044] random: udevadm: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
  787. [    3.718478] random: udevadm: uninitialized urandom read (16 bytes read, 26 bits of entropy available)
  788. [    4.000056] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
  789. [    4.491243] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
  790. [    5.083461] ip_tables: (C) 2000-2006 Netfilter Core Team
  791. [    5.115173] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
  792. [    5.116158] systemd[1]: Detected architecture arm64.
  793. [    5.118606] systemd[1]: Set hostname to <rockpro64>.
  794. [    5.172379] ttyS2 - failed to request DMA, use interrupt mode
  795. [    5.441330] systemd[1]: Reached target Remote File Systems.
  796. [    5.442265] systemd[1]: Listening on Journal Socket.
  797. [    5.442713] systemd[1]: Listening on fsck to fsckd communication Socket.
  798. [    5.443231] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  799. [    5.443960] systemd[1]: Listening on Journal Audit Socket.
  800. [    5.444401] systemd[1]: Listening on udev Kernel Socket.
  801. [    5.445356] systemd[1]: Created slice User and Session Slice.
  802. [    5.445899] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  803. [    5.446304] systemd[1]: Reached target Encrypted Volumes.
  804. [    5.446745] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  805. [    5.447136] systemd[1]: Reached target Swap.
  806. [    5.447451] systemd[1]: Reached target Paths.
  807. [    5.447942] systemd[1]: Listening on Journal Socket (/dev/log).
  808. [    5.448867] systemd[1]: Created slice System Slice.
  809. [    5.451531] systemd[1]: Mounting Huge Pages File System...
  810. [    5.454666] systemd[1]: Mounting Debug File System...
  811. [    5.461203] systemd[1]: Starting Restore / save the current clock...
  812. [    5.464801] systemd[1]: Mounting POSIX Message Queue File System...
  813. [    5.466232] systemd[1]: Created slice system-serial\x2dgetty.slice.
  814. [    5.466971] systemd[1]: Reached target Slices.
  815. [    5.470584] systemd[1]: Starting Set the console keyboard layout...
  816. [    5.472278] systemd[1]: Created slice system-getty.slice.
  817. [    5.475783] systemd[1]: Starting Nameserver information manager...
  818. [    5.479649] systemd[1]: Starting Remount Root and Kernel File Systems...
  819. [    5.480796] systemd[1]: Listening on udev Control Socket.
  820. [    5.482277] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  821. [    5.524875] systemd[1]: Starting Load Kernel Modules...
  822. [    5.525434] systemd[1]: Listening on Syslog Socket.
  823. [    5.528423] systemd[1]: Starting Journal Service...
  824. [    5.532171] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  825. [    5.533063] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
  826. [    5.541041] systemd[1]: Mounted POSIX Message Queue File System.
  827. [    5.541630] systemd[1]: Mounted Huge Pages File System.
  828. [    5.542141] systemd[1]: Mounted Debug File System.
  829. [    5.554767] systemd[1]: Started Remount Root and Kernel File Systems.
  830. [    5.558853] systemd[1]: Started Create list of required static device nodes for the current kernel.
  831. [    5.563454] systemd[1]: Started Load Kernel Modules.
  832. [    5.568025] systemd[1]: Mounting FUSE Control File System...
  833. [    5.571373] systemd[1]: Mounting Configuration File System...
  834. [    5.574702] systemd[1]: Starting Apply Kernel Variables...
  835. [    5.583469] systemd[1]: Starting Create Static Device Nodes in /dev...
  836. [    5.594745] systemd[1]: Starting Load/Save Random Seed...
  837. [    5.601001] systemd[1]: Starting udev Coldplug all Devices...
  838. [    5.612907] systemd[1]: Mounted Configuration File System.
  839. [    5.613307] systemd[1]: Mounted FUSE Control File System.
  840. [    5.615374] systemd[1]: Started Nameserver information manager.
  841. [    5.617223] systemd[1]: Started Restore / save the current clock.
  842. [    5.620463] systemd[1]: Time has been changed
  843. [    5.637341] systemd[1]: Started Apply Kernel Variables.
  844. [    5.678996] systemd[1]: Started Load/Save Random Seed.
  845. [    5.720060] systemd[1]: Started Create Static Device Nodes in /dev.
  846. [    5.722881] systemd[1]: Starting udev Kernel Device Manager...
  847. [    5.766328] systemd[1]: Started Journal Service.
  848. [    5.803458] systemd-journald[288]: Received request to flush runtime journal from PID 1
  849. [    6.010679] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
  850. [    6.157205] rk-hdmi-dp-sound hdmi-dp-sound: control 3:0:0:ELD:0 is already present
  851. [    6.157215] hdmi-audio-codec hdmi-audio-codec.5.auto: ASoC: Failed to add ELD: -16
  852. [    6.157610] rk-hdmi-dp-sound hdmi-dp-sound: multicodec <-> ff8a0000.i2s mapping ok
  853. [    6.158085] hdmi-audio-codec hdmi-audio-codec.5.auto: ASoC: Failed to create Playback debugfs file
  854. [    6.265653] zram: Added device: zram0
  855. [    6.266949] zram: Added device: zram1
  856. [    6.267783] zram: Added device: zram2
  857. [    6.268778] zram: Added device: zram3
  858. [    6.270477] zram: Added device: zram4
  859. [    6.271284] zram: Added device: zram5
  860. [    6.286018] [BT_RFKILL]: bt shut off power
  861. [    6.326692] zram1: detected capacity change from 0 to 261050368
  862. [    6.357138] Adding 254928k swap on /dev/zram1.  Priority:5 extents:1 across:254928k SS
  863. [    6.358304] zram2: detected capacity change from 0 to 261050368
  864. [    6.378352] Adding 254928k swap on /dev/zram2.  Priority:5 extents:1 across:254928k SS
  865. [    6.380888] zram3: detected capacity change from 0 to 261050368
  866. [    6.397952] Adding 254928k swap on /dev/zram3.  Priority:5 extents:1 across:254928k SS
  867. [    6.399210] zram4: detected capacity change from 0 to 261050368
  868. [    6.414647] Adding 254928k swap on /dev/zram4.  Priority:5 extents:1 across:254928k SS
  869. [    6.453045] zram0: detected capacity change from 0 to 52428800
  870. [    6.573402] EXT4-fs (zram0): mounted filesystem without journal. Opts: discard
  871. [    7.231448] random: nonblocking pool is initialized
  872. [    7.877155] nr_pdflush_threads exported in /proc is scheduled for removal
  873. [    8.184520] cfg80211: World regulatory domain updated:
  874. [    8.184530] cfg80211:  DFS Master region: unset
  875. [    8.184533] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
  876. [    8.184538] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
  877. [    8.184543] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  878. [    8.184547] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
  879. [    8.184551] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
  880. [    8.184555] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
  881. [    8.184559] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
  882. [    8.184562] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
  883. [    8.184566] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
  884. [    8.862828] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  885. [    9.351080] NET: Registered protocol family 17
  886. [   10.011983] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
  887. [   10.860179] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
  888. [   18.016052] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
  889. [   34.020145] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
  890. [   66.024280] cdn-dp fec00000.dp: Direct firmware load for rockchip/dptx.bin failed with error -2
  891. [  130.028222] cdn-dp fec00000.dp: [drm:cdn_dp_request_firmware] *ERROR* Timed out trying to load firmware
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top