API tools faq
paste
CalcProgrammer1

note 1 dmesg freedreno debian

CalcProgrammer1
Aug 22nd, 2014
343
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 75.59 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] [0: swapper: 0] Booting Linux on physical CPU 0
  2. [ 0.000000] [0: swapper: 0] Initializing cgroup subsys cpu
  3. [ 0.000000] [0: swapper: 0] Linux version 3.0.89-cyanogenmod-g00d3f9b (adam@Adam-Server) (gcc version 4.7.3 (Ubuntu/Linaro 4.7.3-12ubuntu1) ) #17 SMP PREEMPT Fri Aug 22 20:10:56 CDT 2014
  4. [ 0.000000] [0: swapper: 0] CPU: ARMv7 Processor [510f02d2] revision 2 (ARMv7), cr=10c5387d
  5. [ 0.000000] [0: swapper: 0] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache
  6. [ 0.000000] [0: swapper: 0] Machine: QCT MSM8X60 FUSION FFA
  7. [ 0.000000] [0: swapper: 0] Hardboot page reserved at 0x77700000
  8. [ 0.000000] [0: swapper: 0] memory pool 0 (start 38000000 size 600000) initialized
  9. [ 0.000000] [0: swapper: 0] memory pool 1 (start 38600000 size 3802000) initialized
  10. [ 0.000000] [0: swapper: 0] memory pool 2 (start 40400000 size 2a00000) initialized
  11. [ 0.000000] [0: swapper: 0] memory pool 4 (start 79000000 size 1000000) initialized
  12. [ 0.000000] [0: swapper: 0] Memory policy: ECC disabled, Data cache writealloc
  13. [ 0.000000] [0: swapper: 0] socinfo_init: v6, id=86, ver=2.0, raw_id=1697, raw_ver=1697, hw_plat=0, hw_plat_ver=65536
  14. [ 0.000000] [0: swapper: 0] accessory_chip=0 hw_plat_subtype=0
  15. [ 0.000000] [0: swapper: 0] sec_getlog_supply_meminfo: 40000000 40000000 0 0
  16. [ 0.000000] [0: swapper: 0] On node 0 totalpages: 200192
  17. [ 0.000000] [0: swapper: 0] free_area_init_node: node 0, pgdat c0dfd920, node_mem_map c145f000
  18. [ 0.000000] [0: swapper: 0] Normal zone: 832 pages used for memmap
  19. [ 0.000000] [0: swapper: 0] Normal zone: 0 pages reserved
  20. [ 0.000000] [0: swapper: 0] Normal zone: 105664 pages, LIFO batch:31
  21. [ 0.000000] [0: swapper: 0] HighMem zone: 768 pages used for memmap
  22. [ 0.000000] [0: swapper: 0] HighMem zone: 92928 pages, LIFO batch:31
  23. [ 0.000000] [0: swapper: 0] allocating 20586496 bytes at c1aa3000 (49aa3000 physical) for fb
  24. [ 0.000000] [0: swapper: 0] PERCPU: Embedded 8 pages/cpu @c2e48000 s9760 r8192 d14816 u32768
  25. [ 0.000000] [0: swapper: 0] pcpu-alloc: s9760 r8192 d14816 u32768 alloc=8*4096
  26. [ 0.000000] [0: swapper: 0] pcpu-alloc: [0] 0 [0] 1
  27. [ 0.000000] [0: swapper: 0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 198592
  28. [ 0.000000] [0: swapper: 0] Kernel command line: androidboot.hardware=qcom usb_id_pin_rework=true no_console_suspend=true zcache sec_log=0x80000@0x40270008 sec_dbg=0x100000@0x402f000c sec_debug.reset_reason=0x1a2b3c00 pmem_sf_addr=0x7a000000 pmem_sf_size=0x6000000 console=tty0 sec_debug.enable=0 sec_debug.enable_user=0 appsbark=0 msm_watchdog.enable=0 vmalloc=512m hw_rev=12 lpj=67702 androidboot.emmc=true androidboot.serialno=32c245ca androidboot.baseband=csfb root=/dev/mmcblk1p3 rw rootwait
  29. [ 0.000000] [0: swapper: 0] (sec_dbg_setup)
  30. [ 0.000000] [0: swapper: 0] (sec_dbg_setup) sec_dbg_buf_base = 0x402f000c
  31. [ 0.000000] [0: swapper: 0] (sec_dbg_setup) sec_dbg_buf_size = 0x100000
  32. [ 0.000000] hw_rev_setup : HW rev value is intialized first
  33. [ 0.000000] HW rev value : 0xC
  34. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  35. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  36. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  37. [ 0.000000] Memory: 759MB 23MB = 782MB total
  38. [ 0.000000] Memory: 752900k/752900k available, 66300k reserved, 374784K highmem
  39. [ 0.000000] Virtual kernel memory layout:
  40. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  41. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  42. [ 0.000000] DMA : 0xff000000 - 0xffe00000 ( 14 MB)
  43. [ 0.000000] vmalloc : 0xda800000 - 0xfa000000 ( 504 MB)
  44. [ 0.000000] lowmem : 0xc0000000 - 0xda000000 ( 416 MB)
  45. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  46. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  47. [ 0.000000] .init : 0xc0008000 - 0xc005e000 ( 344 kB)
  48. [ 0.000000] .text : 0xc0100000 - 0xc0c7b400 (11757 kB)
  49. [ 0.000000] .data : 0xc0d00000 - 0xc0dfff80 (1024 kB)
  50. [ 0.000000] .bss : 0xc0dfffa4 - 0xc145e1a4 (6521 kB)
  51. [ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  52. [ 0.000000] Preemptible hierarchical RCU implementation.
  53. [ 0.000000] NR_IRQS:855
  54. [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms
  55. [ 0.000000] Console: colour dummy device 80x30
  56. [ 0.000000] console [tty0] enabled
  57. [ 0.001220] Calibrating delay loop (skipped) preset value.. 13.54 BogoMIPS (lpj=67702)
  58. [ 0.001281] pid_max: default: 32768 minimum: 301
  59. [ 0.001617] Security Framework initialized
  60. [ 0.001647] SELinux: Initializing.
  61. [ 0.001708] SELinux: Starting in permissive mode
  62. [ 0.001861] Mount-cache hash table entries: 512
  63. [ 0.003051] Initializing cgroup subsys cpuacct
  64. [ 0.003173] Initializing cgroup subsys freezer
  65. [ 0.003234] CPU: Testing write buffer coherency: ok
  66. [ 0.003570] hw perfevents: enabled with ARMv7 Scorpion-MP PMU driver, 5 counters available
  67. [ 0.036010] CPU1: Booted secondary processor
  68. [ 0.045898] Brought up 2 CPUs
  69. [ 0.045959] SMP: Total of 2 processors activated (27.08 BogoMIPS).
  70. [ 0.046722] devtmpfs: initialized
  71. [ 0.058288] print_constraints: dummy:
  72. [ 0.058380] rdev_init_debugfs: Error-Bad Function Input
  73. [ 0.058685] NET: Registered protocol family 16
  74. [ 0.058898] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
  75. [ 0.060485] (sec_get_lpm_mode) 1a2b3c00
  76. [ 0.060516] (sec_get_lpm_mode) 0
  77. [ 0.060516] (sec_debug_init)
  78. [ 0.060546] (sec_debug_init) reset_reason : 0x1a2b3c00
  79. [ 0.060577] msm_rpm_init: RPM firmware 2.0.67419
  80. [ 0.061248] saw_probe: id=0, name=8901_s0
  81. [ 0.061584] saw_probe: id=1, name=8901_s1
  82. [ 0.062896] rcg_clk_handoff: gsbi12_uart_clk rate=3686400
  83. [ 0.062957] rcg_clk_handoff: gsbi12_qup_clk rate=24000000
  84. [ 0.063018] rcg_clk_handoff: sdc1_clk rate=48000000
  85. [ 0.063079] rcg_clk_handoff: dsi_byte_clk rate=1
  86. [ 0.063140] rcg_clk_handoff: mdp_clk rate=200000000
  87. [ 0.063262] rcg_clk_handoff: pixel_mdp_clk rate=53990000
  88. [ 0.064819] ACPU PVS: Slow
  89. [ 0.064880] Max ACPU freq: 1512000 KHz
  90. [ 0.070556] CPU0: 23 scaling frequencies supported.
  91. [ 0.070556] CPU1: 23 scaling frequencies supported.
  92. [ 0.071014] LTE_switch_init!
  93. [ 0.071075] LTE_switch_init end!
  94. [ 0.072235] pm8058_probe: PMIC revision: E3
  95. [ 0.073272] pm_gpio_probe: OK: base=173, ngpio=40
  96. [ 0.073455] pm8xxx_mpp_probe: OK: base=213, ngpio=12
  97. [ 0.074554] pm8901_probe: PMIC REVISION = F4
  98. [ 0.074890] pm8xxx_mpp_probe: OK: base=225, ngpio=4
  99. [ 0.087005] ram_console: got buffer at 77800000, size 100000
  100. [ 0.087097] ram_console: found existing buffer, size 45220, start 45220
  101. [ 0.230133] console [ram-1] enabled
  102. [ 0.231414] pm8058_gpios_init PMIC_GPIO_EAR_DET : OK
  103. [ 0.232086] msm_snddev_init
  104. [ 0.242919] [TSP] tsp_mxt540e_power_init: success
  105. [ 0.243072] [E-PEN] wacom_settle_down_befor_poweron
  106. [ 0.243133] [E-PEN] wacom_gpio_init
  107. [ 0.243713] [E-PEN] : initialized.
  108. [ 0.244171] [TKEY] tkey_device_init: 8901_lvs2 On
  109. [ 0.244750] [TKEY] tkey_device_init: TKEY_L12 3.3 V Set
  110. [ 0.244903] brcm_wlan_init: start
  111. [ 0.245025] brcm_init_wlan_mem: WIFI MEM Allocated
  112. [ 0.260894] bio: create slab <bio-0> at 0
  113. [ 0.262390] ION heap vmalloc created
  114. [ 0.262512] ION heap mm created at 38800000 with size 3600000
  115. [ 0.262603] ION heap mm_fw created at 38600000 with size 200000
  116. [ 0.262786] ION heap mfc created at 3be00000 with size 2000
  117. [ 0.262939] ION heap sf created at 7a000000 with size 5000000
  118. [ 0.263031] ION heap wb created at 40400000 with size 1800000
  119. [ 0.263214] ION heap camera_preview created at 41c00000 with size 1200000
  120. [ 0.263305] ION heap qsecom created at 79000000 with size 600000
  121. [ 0.263458] ION heap audio created at 79600000 with size 4cf000
  122. [ 0.263702] pmic8058_pwm_probe: OK
  123. [ 0.264373] SCSI subsystem initialized
  124. [ 0.264678] usbcore: registered new interface driver usbfs
  125. [ 0.264831] usbcore: registered new interface driver hub
  126. [ 0.265075] usbcore: registered new device driver usb
  127. [ 0.265502] i2c-gpio i2c-gpio.15: using pins 107 (SDA) and 101 (SCL)
  128. [ 0.265777] i2c-gpio i2c-gpio.10: using pins 138 (SDA) and 139 (SCL)
  129. [ 0.266021] i2c i2c-13: Failed to register i2c client sec_touchkey at 0x20 (-16)
  130. [ 0.266143] i2c i2c-13: Can't create device at 0x20
  131. [ 0.266235] i2c-gpio i2c-gpio.13: using pins 156 (SDA) and 157 (SCL)
  132. [ 0.266540] i2c-gpio i2c-gpio.11: using pins 38 (SDA) and 39 (SCL)
  133. [ 0.266906] i2c-gpio i2c-gpio.12: using pins 51 (SDA) and 52 (SCL)
  134. [ 0.267120] i2c-gpio i2c-gpio.17: using pins 70 (SDA) and 94 (SCL)
  135. [ 0.267395] i2c-gpio i2c-gpio.9: using pins 155 (SDA) and 154 (SCL)
  136. [ 0.267761] Advanced Linux Sound Architecture Driver Version 1.0.24.
  137. [ 0.268310] Bluetooth: Core ver 2.16
  138. [ 0.268432] NET: Registered protocol family 31
  139. [ 0.268524] Bluetooth: HCI device and connection manager initialized
  140. [ 0.268676] Bluetooth: HCI socket layer initialized
  141. [ 0.268737] Bluetooth: L2CAP socket layer initialized
  142. [ 0.269073] Bluetooth: SCO socket layer initialized
  143. [ 0.269622] cfg80211: Calling CRDA to update world regulatory domain
  144. [ 0.269958] Switching to clocksource gp_timer
  145. [ 0.287475] NET: Registered protocol family 2
  146. [ 0.287750] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
  147. [ 0.288085] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
  148. [ 0.288818] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  149. [ 0.289520] TCP: Hash tables configured (established 65536 bind 65536)
  150. [ 0.289642] TCP reno registered
  151. [ 0.289733] UDP hash table entries: 256 (order: 1, 8192 bytes)
  152. [ 0.289886] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  153. [ 0.290374] NET: Registered protocol family 1
  154. [ 0.290802] RPC: Registered named UNIX socket transport module.
  155. [ 0.290863] RPC: Registered udp transport module.
  156. [ 0.291015] RPC: Registered tcp transport module.
  157. [ 0.291107] RPC: Registered tcp NFSv4.1 backchannel transport module.
  158. [ 0.291687] PMU: registered new PMU device of type 0
  159. [ 0.291961] PMU: registered new PMU device of type 1
  160. [ 0.292449] ETM/ETB intialized.
  161. [ 0.292633] pil_qdsp6v3 pil_qdsp6v3: using secure boot
  162. [ 0.293151] pil_modem pil_modem: using secure boot
  163. [ 0.293457] sdio_al:SDIO-AL SW version 1.30
  164. [ 0.296264] smd_channel_probe_worker: allocation table not initialized
  165. [ 0.302947] msm_dsps driver version 3.03.
  166. [ 0.308776] lpa_if_init: lpa_if_ptr 0xd9aa9300 buf_vir 0xffdf0000 buf_phy 0x61030000 buf_zise 65536
  167. [ 0.311401] sec_switch_probe enter sec_switch_probe
  168. [ 0.312225] charm_modem_probe: Registering charm modem
  169. [ 0.314575] msm_rpm_log_probe: OK
  170. [ 0.314788] [BT] bcm4330_bluetooth_init
  171. [ 0.315277] [BT] bcm4330_bluetooth_probe
  172. [ 0.315795] printk_remap_nocache: sec_log_save_size 524288 at sec_log_save_base 0x40270008
  173. [ 0.315887] printk_remap_nocache: sec_log_reserve_size 524296 at sec_log_reserve_base 0x40270000
  174. [ 0.320434] sec_getlog_supply_kloginfo: 0xc1236684
  175. [ 0.320770] audit: initializing netlink socket (disabled)
  176. [ 0.320892] type=2000 audit(0.280:1): initialized
  177. [ 0.404235] highmem bounce pool size: 64 pages
  178. [ 0.404541] ashmem: initialized
  179. [ 0.410675] fuse init (API version 7.16)
  180. [ 0.411102] msgmni has been set to 738
  181. [ 0.411224] SELinux: Registering netfilter hooks
  182. [ 0.412963] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  183. [ 0.413146] io scheduler noop registered
  184. [ 0.413269] io scheduler deadline registered (default)
  185. [ 0.413421] io scheduler row registered
  186. [ 0.413543] io scheduler cfq registered
  187. [ 0.416015] mdp4_csc_config: Block type 10 isn't supported by CSC.
  188. [ 0.416198] mdp4_csc_config: Block type 8 isn't supported by CSC.
  189. [ 0.420074] mipi_dsi base phy_addr = 0x4700000 virt = 0xdb100000
  190. [ 0.420227] mmss_sfpb base phy_addr = 0x5700000,virt = 0xda83a000
  191. [ 0.420562] [Mipi_LCD] lcd_init
  192. [ 0.420959] [Mipi_LCD_ESD] sec_esd_probe : Registering esd driver
  193. [ 0.421417] Mipi_Lcd : mipi_video_s6e8aa0_wxga_q1_pt_init
  194. [ 0.421905] [Mipi_LCD] lcd_probe+
  195. [ 0.421997] [Mipi_LCD] msm_fb_add_device +
  196. [ 0.422149] setting pdata->panel_info.fb_num to 3. type: 8
  197. [ 0.430694] FrameBuffer[0] 800x1280 size=12288000 bytes is registered successfully!
  198. [ 0.430877] is_lpcharging_state: is_lpm_boot:0
  199. [ 0.430969] pm_runtime: fail to wake up
  200. [ 0.431060] [Mipi_LCD] mipi_S6E8AA0_panel_power: Enable=1, Q1_ATT seq
  201. [ 0.431243] [Mipi_LCD] Use LDO19, volt=3100000
  202. [ 0.450775] [Mipi_LCD] mipi_S6E8AA0_panel_gpio_init
  203. [ 0.511749] [Mipi_LCD] lcd_on
  204. [ 0.511840] [Mipi_LCD] lcd_on_seq +
  205. [ 0.570922] [Mipi_LCD] read_reg : D3[24] : 00 ce ef f6 .f8 ff 01 fe .00 d1 fd f4 .f8 fb 01 fa .00 ca f3 f2 .f9 01 01 fd .00 00 00 00 .
  206. [ 0.571197] [Mipi_LCD] mtp : 00 ce ef f6 f8 ff 01 fe 00 d1 fd f4 f8 fb 01 fa 00 ca f3 f2 f9 01 01 fd
  207. [ 0.571624] [Mipi_LCD] read_reg : D1[8] : a2 83 1f 01 .0b 00 00 40 .00 00 00 00 .
  208. [ 0.571807] [Mipi_LCD] Update LCD ID: A2-Line(0xA2) SM2C15PR(0x83) Ielvss(1f)
  209. [ 0.571990] It goes to ID unknown++++++++++++++++++++++++++++++ MTP VALUE ++++++++++++++++++++++++++++++
  210. [ 0.572204] V Level : 0 - R : 0x00000000(0000) G : 0x00000000(0000) B : 0x00000000(0000)
  211. [ 0.572662] V Level : 1 - R : 0xffffffce(-050) G : 0xffffffd1(-047) B : 0xffffffca(-054)
  212. [ 0.573120] V Level : 2 - R : 0xffffffef(-017) G : 0xfffffffd(-003) B : 0xfffffff3(-013)
  213. [ 0.573547] V Level : 3 - R : 0xfffffff6(-010) G : 0xfffffff4(-012) B : 0xfffffff2(-014)
  214. [ 0.573944] V Level : 4 - R : 0xfffffff8(-008) G : 0xfffffff8(-008) B : 0xfffffff9(-007)
  215. [ 0.574401] V Level : 5 - R : 0xffffffff(-001) G : 0xfffffffb(-005) B : 0x00000001(0001)
  216. [ 0.574859] V Level : 6 - R : 0xfffffffe(-002) G : 0xfffffffa(-006) B : 0xfffffffd(-003)
  217. [ 0.575317]
  218. [ 0.575317]
  219. [ 0.575317] ++++++++++++++++++++++++++++++ ADJUST VALUE ++++++++++++++++++++++++++++++
  220. [ 0.575653] V Level : 0 - R : 0x00000069(0105) G : 0x0000005a(0090) B : 0x0000006c(0108)
  221. [ 0.576019] V Level : 1 - R : 0x0000006f(0111) G : 0x00000088(0136) B : 0x00000067(0103)
  222. [ 0.576477] V Level : 2 - R : 0x0000009a(0154) G : 0x000000b3(0179) B : 0x000000a2(0162)
  223. [ 0.576934] V Level : 3 - R : 0x000000ae(0174) G : 0x000000b5(0181) B : 0x000000ab(0171)
  224. [ 0.577392] V Level : 4 - R : 0x00000086(0134) G : 0x0000008e(0142) B : 0x00000084(0132)
  225. [ 0.577789] V Level : 5 - R : 0x000000a5(0165) G : 0x000000a7(0167) B : 0x000000a5(0165)
  226. [ 0.578247] V Level : 6 - R : 0x000000d0(0208) G : 0x000000cd(0205) B : 0x000000ee(0238)
  227. [ 0.578704]
  228. [ 0.578704]
  229. [ 0.578704] ++++++++++++++++++++++++++++++ ADJUST VOLTAGE ++++++++++++++++++++++++++++++
  230. [ 0.579010] V Level : 0 - R : 4600V G : 4600V B : 4600V
  231. [ 0.579406] V Level : 1 - R : 3757V G : 3872V B : 3734V
  232. [ 0.579833] V Level : 2 - R : 3614V G : 3655V B : 3580V
  233. [ 0.580200] V Level : 3 - R : 3408V G : 3428V B : 3334V
  234. [ 0.580657] V Level : 4 - R : 3248V G : 3291V B : 3171V
  235. [ 0.581054] V Level : 5 - R : 3077V G : 3117V B : 2971V
  236. [ 0.581481] V Level : 6 - R : 2665V G : 2705V B : 2494V
  237. [ 0.581848] V Level : 7 - R : 2239V G : 2262V B : 2009V
  238. [ 0.582305] [Mipi_LCD] update_LCD_SEQ_by_id : G22SM2M15 c2 b0 i
  239. [ 0.582305]
  240. [ 0.582672] [Mipi_LCD] SDIMMING(12=150cd) ELVSS(12->12,1f+d:9f) ACL(ON:150,45)
  241. [ 0.710662] [Mipi_LCD] lcd_on_seq - : gamma=12, ACl=12, Elvss=12
  242. [ 0.712249] mdp4_csc_config: Block type 10 isn't supported by CSC.
  243. [ 0.712341] mdp4_csc_config: Block type 8 isn't supported by CSC.
  244. [ 0.715576] load_565rle_image: Can not open /initlogo.rle
  245. [ 0.715942] Registered led device: lcd-backlight
  246. [ 0.716156] mipi_dsi_probe: H.Period=1070, width=2, BPorch=134, xrex=800,FPorch=134
  247. [ 0.716278] mipi_dsi_probe: V.Period=1308, width=2, BPorch=1, xrex=1280,FPorch=25
  248. [ 0.716461] mipi_dsi_probe: mipi->frame_rate = 58
  249. [ 0.716552] mipi_dsi_probe: Lanes = 4
  250. [ 0.716705] mipi_dsi_probe: pll_divider_config.clk_rate = 487046880
  251. [ 0.716796] mipi_dsi_probe: dsi_pclk_rate = 81166666
  252. [ 0.716979] mipi_dsi_probe: mipi->dsi_pclk_rate = 81166666
  253. [ 0.717071] sec_getlog_supply_fbinfo: 0x49aa3000 800 1280 32 2
  254. [ 0.717254] [Mipi_LCD] msm_fb_add_device -
  255. [ 0.717498] mdnie cmap->len 256
  256. [ 0.717712] [Mipi_LCD] lcd_probe-
  257. [ 0.718200] hdmi_msm hdmi_msm.0: probe
  258. [ 0.718811] hdmi_msm hdmi_msm.1: probe
  259. [ 0.718963] hdmi_msm hdmi_msm.1: Features <val:0x80004481, HDMI:ON, HDCP:ON>
  260. [ 0.719299] setting pdata->panel_info.fb_num to 1. type: 7
  261. [ 0.720062] mdp4_dtv_vsync_init: ndx=0
  262. [ 0.722686] FrameBuffer[1] 1920x1080 size=4149248 bytes is registered successfully!
  263. [ 0.723022] mdp4_dtv_vsync_init: ndx=0
  264. [ 0.723266] hdmi_msm hdmi_msm.1: external_common_state_create: sysfs group d90ec808
  265. [ 0.723388] hdmi_msm hdmi_msm.1: external_common_state_create: kobject_uevent(KOBJ_ADD)
  266. [ 0.723602] hdmi_msm hdmi_msm.1: hdmi_msm_config_hdcp_feature: HDCP Feature: Enabled
  267. [ 0.723907] hdmi_msm_init: success: DEBUG AUDIO EDID HPD HDCP DVI:0
  268. [ 0.725036]
  269. [ 0.725067] msm_vidc_enc: Inside vid_enc_init()
  270. [ 0.725433]
  271. [ 0.725433] msm_vidc_enc: Inside vid_enc_vcd_init()
  272. [ 0.725677] is_lpcharging_state: is_lpm_boot:0
  273. [ 0.726013] mhl_v2, Board : get_mhl_int_irq, rev:12
  274. [ 0.726348] create mhl sysfile
  275. [ 0.726867] input: sii9234_rcp as /devices/virtual/input/input0
  276. [ 0.825134] msm_serial_hs.0: ttyHS0 at MMIO 0x16540000 (irq = 188) is a MSM HS UART
  277. [ 0.826080] msm_serial_hs module loaded
  278. [ 0.826293] msm_serial_hsl: detected port #1
  279. [ 0.826446] msm_serial_hsl.1: ttyHSL1 at MMIO 0x19940000 (irq = 221) is a MSM
  280. [ 0.827178] msm_serial_hsl: detected port #0
  281. [ 0.827392] msm_serial_hsl.0: ttyHSL0 at MMIO 0x19c40000 (irq = 227) is a MSM
  282. [ 0.828186] msm_serial_hsl: driver initialized
  283. [ 0.829467] msm_rotator_probe: rotator_hw_revision=1
  284. [ 0.830230] [drm] Initialized drm 1.1.0 20060810
  285. [ 0.831970] [drm] Initialized kgsl 2.1.1 20100127 on minor 0
  286. [ 0.832305] kgsl kgsl-3d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  287. [ 0.833984] kgsl kgsl-2d0: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  288. [ 0.835327] kgsl kgsl-2d1: |kgsl_gpummu_init| MMU type set for device is GPUMMU
  289. [ 0.840911] brd: module loaded
  290. [ 0.843231] loop: module loaded
  291. [ 0.843505] pmem: Initializing pmem_audio (user-space) as non-cached
  292. [ 0.844055] allocating 5042176 bytes at (null) (79acf000 physical) for pmem_audio
  293. [ 0.844482] is_lpcharging_state: is_lpm_boot:0
  294. [ 0.844665] ak8975 probe start!
  295. [ 0.845794] sensor_power_on_vdd: vdd_2p85=1, vdd_1p8=0, vdd_2p_4=0, vdd_2p85_mag=1
  296. [ 0.846984] ak8975 probe success!
  297. [ 0.847137] is_lpcharging_state: is_lpm_boot:0
  298. [ 0.847320] k3dh probe start!!
  299. [ 0.847442] sensor_power_on_vdd: vdd_2p85=2, vdd_1p8=0, vdd_2p_4=0, vdd_2p85_mag=2
  300. [ 0.848052] k3dh probe success!!
  301. [ 0.848358] sec_jack:sec_jack_probe : Registering jack driver
  302. [ 0.848571] input: sec_jack as /devices/virtual/input/input1
  303. [ 0.849639] pm8xxx_upl_probe: OK
  304. [ 0.850891] QSEECOM: qseecom_init: Failed to retrieve QSEE version information -22
  305. [ 0.851470] is_lpcharging_state: is_lpm_boot:0
  306. [ 0.851593] a2220_init
  307. [ 0.851959] i2c-core: driver [audience_a2220] using legacy suspend method
  308. [ 0.852142] i2c-core: driver [audience_a2220] using legacy resume method
  309. [ 0.852539] level device init
  310. [ 0.857330] audience_a2220B:a2220_ctrl : lsj:: a2220_firmware_buf = 68268
  311. [ 0.857452] audience_a2220B:a2220_ctrl: creating thread..
  312. [ 0.857727] init_a2220 -
  313. [ 0.857757] audience_a2220B:a2220_init_thread
  314. [ 0.857971] adie_codec_register_codec_operations: codec type 1
  315. [ 0.858673] Loading pn544 driver
  316. [ 0.858795] pn544_probe : IRQ num 628
  317. [ 0.859313] pn544_probe : requesting IRQ 628
  318. [ 0.860351] SCSI Media Changer driver v0.25
  319. [ 0.860870] PPP generic driver version 2.4.2
  320. [ 0.861419] PPP Deflate Compression module registered
  321. [ 0.861511] PPP BSD Compression module registered
  322. [ 0.862335] PPP MPPE Compression module registered
  323. [ 0.862457] NET: Registered protocol family 24
  324. [ 0.862548] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
  325. [ 0.862731] CSLIP: code copyright 1989 Regents of the University of California.
  326. [ 0.863250] tun: Universal TUN/TAP device driver, 1.6
  327. [ 0.863372] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
  328. [ 0.864532] smsc911x: Driver version 2008-10-21
  329. [ 0.864898] usbcore: registered new interface driver asix
  330. [ 0.865081] usbcore: registered new interface driver cdc_ether
  331. [ 0.865234] usbcore: registered new interface driver net1080
  332. [ 0.865417] usbcore: registered new interface driver cdc_subset
  333. [ 0.865570] usbcore: registered new interface driver zaurus
  334. [ 0.865753] cdc_ncm: 04-Aug-2011
  335. [ 0.865875] usbcore: registered new interface driver cdc_ncm
  336. [ 0.866027] rmnet_init: SMD devices[8]
  337. [ 0.869842] rmnet_init: SDIO devices[8]
  338. [ 0.872222] msm_hsusb_smb328a_vbus_power attached 0
  339. [ 0.874328] msm_otg msm_otg: success to host_notify_dev_register
  340. [ 0.874633] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  341. [ 0.875061] host driver registered w/ tranceiver
  342. [ 0.875366] usbcore: registered new interface driver cdc_acm
  343. [ 0.875518] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  344. [ 0.875671] usbcore: registered new interface driver usblp
  345. [ 0.875854] Initializing USB Mass Storage driver...
  346. [ 0.876007] usbcore: registered new interface driver usb-storage
  347. [ 0.876159] USB Mass Storage support registered.
  348. [ 0.876281] usbcore: registered new interface driver ums-alauda
  349. [ 0.876495] usbcore: registered new interface driver ums-cypress
  350. [ 0.876647] usbcore: registered new interface driver ums-datafab
  351. [ 0.876831] usbcore: registered new interface driver ums-freecom
  352. [ 0.876983] usbcore: registered new interface driver ums-isd200
  353. [ 0.877197] usbcore: registered new interface driver ums-jumpshot
  354. [ 0.877319] usbcore: registered new interface driver ums-karma
  355. [ 0.877532] usbcore: registered new interface driver ums-onetouch
  356. [ 0.877685] usbcore: registered new interface driver ums-sddr09
  357. [ 0.877868] usbcore: registered new interface driver ums-sddr55
  358. [ 0.878082] usbcore: registered new interface driver ums-usbat
  359. [ 0.878204] usbcore: registered new interface driver usb_ehset_test
  360. [ 0.878631] peripheral driver registered w/ tranceiver
  361. [ 0.878784] msm_otg_sm_work 1798 id=0 OTG_STATE_UNDEFINED
  362. [ 0.881500] android_usb gadget: Mass Storage Function, version: 2009/09/11
  363. [ 0.881622] android_usb gadget: Number of LUNs=2
  364. [ 0.881805] lun0: LUN: removable file: (no medium)
  365. [ 0.881896] lun1: LUN: removable file: (no medium)
  366. [ 0.882354] android_usb gadget: android_usb ready
  367. [ 0.884155] DIAG registered SDIO device
  368. [ 0.884735] diagchar initialized now
  369. [ 0.885284] mousedev: PS/2 mouse device common for all mice
  370. [ 0.887054] input: ffa-keypad as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-keypad/input/input2
  371. [ 0.888000] is_lpcharging_state: is_lpm_boot:0
  372. [ 0.888122] [TSP] mxt540e_probe START
  373. [ 0.888336] input: sec_touchscreen as /devices/virtual/input/input3
  374. [ 0.888793] [TSP] mxt540e_power_on: enter
  375. [ 0.889282] [TSP POWER ON L4 2.8 enable
  376. [ 0.889770] [TSP POWER ON L1 3.3 enable
  377. [ 0.889862] mxt540e_power_on: exit
  378. [ 0.957946] audience_a2220B:a2220_bootup_init : lsj::a2220_bootup_init AAAAAAAAAAAAAAAAAAAAAA +
  379. [ 1.010467] audience_a2220B:a2220_bootup_init : lsj::a2220_bootup_init 1
  380. [ 1.010772] audience_a2220B:a2220_bootup_init : lsj::a2220_bootup_init 2
  381. [ 1.011962] audience_a2220B:a2220_bootup_init : lsj::a2220_bootup_init 3
  382. [ 1.012145] audience_a2220B:a2220_bootup_init : lsj::a2220_bootup_init 4
  383. [ 1.012298] a2220_bootup_init: starting to load image (2134 passes)...
  384. [ 1.020385] mxt540E_power_on is finished
  385. [ 1.100463] msm_otg_sm_work 1801 id=1 OTG_STATE_UNDEFINED
  386. [ 1.100646] msm_hsusb_pmic_id_notif_init: USB_ID is not routed to PMIC
  387. [ 1.101165] msm_otg_suspend: usb in low power mode
  388. [ 1.160614] qup_i2c qup_i2c.0: QUP: I2C status flags :0x11143c8, irq:183
  389. [ 1.160827] qup_i2c qup_i2c.0: I2C slave addr:0x26 not connected
  390. [ 1.160949] Atmel MXT540E 0-004c: mxt540e_check_bootloader: i2c recv failed
  391. [ 1.161621] Atmel MXT540E 0-004c: family = 0xa1, variant = 0x3, version = 0x13, build = 170
  392. [ 1.161743] family = 0xa1, variant = 0x3, version = 0x13, build = 170
  393. [ 1.170715] [TSP] TSP chip is MXT540E
  394. [ 1.172607] [TSP] exist instance1 object (9)
  395. [ 1.174438] [TSP] exist instance1 object (15)
  396. [ 1.178527] [TSP] exist instance1 object (40)
  397. [ 1.179504] [TSP] exist instance1 object (42)
  398. [ 1.181152] [TSP] exist instance1 object (47)
  399. [ 1.184082] [TSP] exist instance1 object (52)
  400. [ 1.185211] [TSP] exist instance1 object (55)
  401. [ 1.186004] [TSP] exist instance1 object (57)
  402. [ 1.490539] [TSP] ta_status is 0
  403. [ 1.490722] [TSP] mxt540e_ta_probe ta_status = 0
  404. [ 1.493682] [TSP] calibration success!!!
  405. [ 1.494567] input: pmic8xxx_pwrkey as /devices/platform/msm_ssbi.0/pm8058-core/pm8xxx-pwrkey/input/input4
  406. [ 1.494628] [TSP] calibration is on going
  407. [ 1.495300] [TSP] reset is ongoing
  408. [ 1.496307] bmp180_probe : enter
  409. [ 1.497009] [TSP] normal mode
  410. [ 1.500061] input: barometer_sensor as /devices/virtual/input/input5
  411. [ 1.500640] Registered sensors device: barometer_sensor
  412. [ 1.502319] [TSP] calibration is on going
  413. [ 1.502746] using rtc device, pm8xxx_rtc, for alarms
  414. [ 1.502868] rtc-pm8xxx rtc-pm8xxx: rtc core: registered pm8xxx_rtc as rtc0
  415. [ 1.503479] i2c /dev entries driver
  416. [ 1.506622] is_lpcharging_state: is_lpm_boot:0
  417. [ 1.506805] yda165:yda165_init
  418. [ 1.506958] yda165:yda165_probe
  419. [ 1.507049] yda165:yda165_probe
  420. [ 1.507141] yda165_probe: OK
  421. [ 1.507537] yda165:load_ampgain completed
  422. [ 1.507720] is_lpcharging_state: is_lpm_boot:0
  423. [ 1.508026] sensor_power_on_vdd: vdd_2p85=3, vdd_1p8=0, vdd_2p_4=0, vdd_2p85_mag=3
  424. [ 1.508331] input: proximity_sensor as /devices/virtual/input/input6
  425. [ 1.508850] opt_i2c_probe(839):
  426. [ 1.508972] opt_i2c_probe, 840 : start!!!
  427. [ 1.509063] GP2A opt i2c attach success!!!
  428. [ 1.509216] GP2A opt i2c attach success!!!
  429. [ 1.509307] opt_i2c_probe, 859 : end!!!
  430. [ 1.509460] opt_i2c_client : (0xd9a3d400)
  431. [ 1.510437] opt_i2c_write(497): : 0x4, 0x2
  432. [ 1.510589] gp2a_opt_probe is OK!!
  433. [ 1.511230] is_lpcharging_state: is_lpm_boot:0
  434. [ 1.512237] input: light_sensor as /devices/virtual/input/input7
  435. [ 1.513031] input: fsa9480 as /devices/i2c-5/5-0025/input/input8
  436. [ 1.516021] fsa9480 5-0025: fsa9480_reg_init dev ID: 0x0
  437. [ 1.516235] i2c-core: driver [fsa9480] using legacy resume method
  438. [ 1.516448] is_lpcharging_state: is_lpm_boot:0
  439. [ 1.516571] [GYRO] k3g_probe start!
  440. [ 1.516693] sensor_power_on_vdd: vdd_2p85=4, vdd_1p8=0, vdd_2p_4=0, vdd_2p85_mag=4
  441. [ 1.517242] input: gyro_sensor as /devices/virtual/input/input9
  442. [ 1.519134] input: orientation_sensor as /devices/virtual/input/input10
  443. [ 1.519836] lirc_dev: IR Remote Control driver registered, major 239
  444. [ 1.520019] IR NEC protocol handler initialized
  445. [ 1.520111] IR RC5(x) protocol handler initialized
  446. [ 1.520294] IR RC6 protocol handler initialized
  447. [ 1.520385] IR JVC protocol handler initialized
  448. [ 1.520599] IR Sony protocol handler initialized
  449. [ 1.520751] IR RC5 (streamzap) protocol handler initialized
  450. [ 1.520874] IR LIRC bridge handler initialized
  451. [ 1.521026] Linux video capture interface: v2.00
  452. [ 1.521209] usbcore: registered new interface driver uvcvideo
  453. [ 1.521392] USB Video Class driver (v1.1.0)
  454. [ 1.522766] is_lpcharging_state: is_lpm_boot:0
  455. [ 1.522979] ############# M5MO probe ##############
  456. [ 1.523254] [M5MO] m5mo_sensor_probe : E
  457. [ 1.523406] [M5MO] m5mo_i2c_init : E
  458. [ 1.523559] [M5MO] m5mo_i2c_probe : E
  459. [ 1.523712] [M5MO] m5mo_i2c_probe : m5mo_i2c_probe X
  460. [ 1.523742]
  461. [ 1.525451] is_lpcharging_state: is_lpm_boot:0
  462. [ 1.525787] ############# S5K5BAFX probe ##############
  463. [ 1.526245] [5BAFX] s5k5bafx_sensor_probe : E
  464. [ 1.526428] [5BAFX] s5k5bafx_i2c_init : E
  465. [ 1.526550] [5BAFX] s5k5bafx_i2c_probe : E
  466. [ 1.526641] [5BAFX] s5k5bafx_i2c_probe : X
  467. [ 1.526885] [5BAFX] s5k5bafx_sensor_probe:1370:rc = 0
  468. [ 1.528472] [Torch] ledflash_init
  469. [ 1.529113] I2C radio driver for Qualcomm FM Radio Transceiver , Version 1.0.0
  470. [ 1.529754] max17040_probe: MAX17043 driver Loading!
  471. [ 1.529876] max17040_get_version :
  472. [ 1.530456] max17040 15-0036: MAX17040 Fuel-Gauge Ver 017
  473. [ 1.531097] max17040_get_rcomp : current rcomp = 0xd01f(208)
  474. [ 1.532135] max17040_get_rcomp : current rcomp = 0xd01f(208)
  475. [ 1.534576] i2c-core: driver [max17040] using legacy suspend method
  476. [ 1.534759] i2c-core: driver [max17040] using legacy resume method
  477. [ 1.534942] smb328a_probe: SMB328A driver Loading!
  478. [ 1.535125] [TSP] normal mode
  479. [ 1.535217] is_lpcharging_state: is_lpm_boot:0
  480. [ 1.536437] smb328a_check_bmd_disabled : return ture : reg(0x5)=0x8b (0x80)
  481. [ 1.538085] smb328a_check_bmd_disabled : return ture : reg(0x5)=0x8b (0x80)
  482. [ 1.538757] i2c-core: driver [smb328a] using legacy suspend method
  483. [ 1.538848] i2c-core: driver [smb328a] using legacy resume method
  484. [ 1.539794] msm_adc successfully registered
  485. [ 1.550689] tsens_tm_probe: OK
  486. [ 1.551025] pm8xxx_init_adc: adc_channel_open() failed.
  487. [ 1.551208] pm8xxx_tm_probe: Unable to initialize adc
  488. [ 1.551300] pm8xxx-tm: probe of pm8xxx-tm failed with error -9
  489. [ 1.551849] pm8xxx_tm_probe: OK
  490. [ 1.552398] device-mapper: uevent: version 1.0.3
  491. [ 1.553070] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
  492. [ 1.553405] Bluetooth: HCI UART driver ver 2.2
  493. [ 1.553558] Bluetooth: HCI H4 protocol initialized
  494. [ 1.553680] Bluetooth: HCI_IBS protocol initialized
  495. [ 1.553771] Bluetooth: BlueSleep Mode Driver Ver 1.1
  496. [ 1.554687] cpuidle: using governor ladder
  497. [ 1.554779] cpuidle: using governor menu
  498. [ 1.555572] mmc0: mci-version: 0
  499. [ 1.555755] mmc0: No card detect facilities available
  500. [ 1.556243] mmc0: Qualcomm MSM SDCC-core at 0x0000000012400000 irq 136,0 dma 18 dmacrcri 1
  501. [ 1.556427] mmc0: 8 bit data mode enabled
  502. [ 1.556549] mmc0: 4 bit data mode disabled
  503. [ 1.556701] mmc0: polling status mode disabled
  504. [ 1.556793] mmc0: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  505. [ 1.556945] mmc0: Slot eject status = 0
  506. [ 1.557037] mmc0: Power save feature enable = 1
  507. [ 1.557159] mmc0: DM non-cached buffer at ffd60000, dma_addr 0x60e80000
  508. [ 1.557312] mmc0: DM cmd busaddr 0x60e80000, cmdptr busaddr 0x60e97f40
  509. [ 1.558013] mmc1: mci-version: 0
  510. [ 1.558685] mmc1: Qualcomm MSM SDCC-core at 0x0000000012140000 irq 135,0 dma 19 dmacrcri 4
  511. [ 1.558868] mmc1: 8 bit data mode enabled
  512. [ 1.558990] mmc1: 4 bit data mode disabled
  513. [ 1.559082] mmc1: polling status mode disabled
  514. [ 1.559234] mmc1: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  515. [ 1.559326] mmc1: Slot eject status = 0
  516. [ 1.559509] mmc1: Power save feature enable = 1
  517. [ 1.559600] mmc1: DM non-cached buffer at ffd40000, dma_addr 0x60ea0000
  518. [ 1.559692] mmc1: DM cmd busaddr 0x60ea0000, cmdptr busaddr 0x60eb7f40
  519. [ 1.560394] mmc2: mci-version: 0
  520. [ 1.561279] mmc2: Qualcomm MSM SDCC-core at 0x0000000012180000 irq 134,642 dma 20 dmacrcri 2
  521. [ 1.561462] mmc2: 8 bit data mode disabled
  522. [ 1.561553] mmc2: 4 bit data mode enabled
  523. [ 1.561706] mmc2: polling status mode disabled
  524. [ 1.561798] mmc2: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  525. [ 1.561981] mmc2: Slot eject status = 0
  526. [ 1.562072] mmc2: Power save feature enable = 1
  527. [ 1.562164] mmc2: DM non-cached buffer at ffd20000, dma_addr 0x60ec0000
  528. [ 1.562347] mmc2: DM cmd busaddr 0x60ec0000, cmdptr busaddr 0x60ed7f40
  529. [ 1.562957] mmc3: mci-version: 0
  530. [ 1.563140] mmc3: No card detect facilities available
  531. [ 1.563659] mmc3: Qualcomm MSM SDCC-core at 0x00000000121c0000 irq 133,0 dma 21 dmacrcri 5
  532. [ 1.563842] mmc3: 8 bit data mode disabled
  533. [ 1.563934] mmc3: 4 bit data mode enabled
  534. [ 1.564086] mmc3: polling status mode disabled
  535. [ 1.564208] mmc3: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  536. [ 1.564361] mmc3: Slot eject status = 0
  537. [ 1.564453] mmc3: Power save feature enable = 1
  538. [ 1.564544] mmc3: DM non-cached buffer at ffd00000, dma_addr 0x60f00000
  539. [ 1.564727] mmc3: DM cmd busaddr 0x60f00000, cmdptr busaddr 0x60f17f40
  540. [ 1.565368] mmc4: mci-version: 0
  541. [ 1.566070] mmc4: Qualcomm MSM SDCC-core at 0x0000000012200000 irq 220,0 dma 21 dmacrcri 14
  542. [ 1.566253] mmc4: 8 bit data mode disabled
  543. [ 1.566345] mmc4: 4 bit data mode enabled
  544. [ 1.566436] mmc4: polling status mode disabled
  545. [ 1.566619] mmc4: MMC clock 400000 -> 48000000 Hz, PCLK 0 Hz
  546. [ 1.566711] mmc4: Slot eject status = 0
  547. [ 1.566864] mmc4: Power save feature enable = 1
  548. [ 1.566955] mmc4: DM non-cached buffer at ffce0000, dma_addr 0x60f20000
  549. [ 1.567138] mmc4: DM cmd busaddr 0x60f20000, cmdptr busaddr 0x60f37f40
  550. [ 1.567962] Registered led device: camera:flash0
  551. [ 1.568115] Registered led device: camera:flash1
  552. [ 1.569732] usbcore: registered new interface driver usbhid
  553. [ 1.569824] usbhid: USB HID core driver
  554. [ 1.570831] logger: created 512K log 'log_main'
  555. [ 1.571136] logger: created 256K log 'log_events'
  556. [ 1.571533] logger: created 512K log 'log_radio'
  557. [ 1.571807] logger: created 256K log 'log_system'
  558. [ 1.571929] sec_getlog_supply_loggerinfo: 0xc12d01f8 0xc13501f8 0xc13d01f8 0xc14101f8
  559. [ 1.572509] zram: num_devices not specified. Using default: 1
  560. [ 1.572662] zram: Creating 1 devices ...
  561. [ 1.573272] zcache: using lzo compressor
  562. [ 1.573638] zcache: cleancache enabled using kernel transcendent memory and compression buddies
  563. [ 1.574401] usbcore: registered new interface driver snd-usb-audio
  564. [ 1.575683] msm-cpu-dai msm-cpu-dai.0: asoc_msm_cpu_probe: dev name msm-cpu-dai.0
  565. [ 1.576019] msm-codec-dai msm-codec-dai.0: asoc_msm_codec_probe: dev name msm-codec-dai.0
  566. [ 1.576446] msm-dsp-audio msm-dsp-audio.0: msm_pcm_probe: dev name msm-dsp-audio.0
  567. [ 1.578186] asoc: msm-codec-dai <-> msm-cpu-dai.0 mapping ok
  568. [ 1.579956] ALSA device list:
  569. [ 1.580078] #0: msm-audio
  570. [ 1.580749] oprofile: using arm/armv7-scorpionmp
  571. [ 1.580993] GACT probability NOT on
  572. [ 1.581085] Mirror/redirect action on
  573. [ 1.581237] u32 classifier
  574. [ 1.581329] Actions configured
  575. [ 1.581420] Netfilter messages via NETLINK v0.30.
  576. [ 1.581665] nf_conntrack version 0.5.0 (11764 buckets, 47056 max)
  577. [ 1.582214] ctnetlink v0.93: registering with nfnetlink.
  578. [ 1.582397] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  579. [ 1.582519] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  580. [ 1.583312] xt_time: kernel timezone is -0000
  581. [ 1.583618] ip_tables: (C) 2000-2006 Netfilter Core Team
  582. [ 1.583984] arp_tables: (C) 2002 David S. Miller
  583. [ 1.584136] TCP cubic registered
  584. [ 1.584259] Initializing XFRM netlink socket
  585. [ 1.584960] NET: Registered protocol family 10
  586. [ 1.586822] Mobile IPv6
  587. [ 1.586975] ip6_tables: (C) 2000-2006 Netfilter Core Team
  588. [ 1.587280] IPv6 over IPv4 tunneling driver
  589. [ 1.588226] NET: Registered protocol family 17
  590. [ 1.588348] NET: Registered protocol family 15
  591. [ 1.591735] Bluetooth: RFCOMM TTY layer initialized
  592. [ 1.591857] Bluetooth: RFCOMM socket layer initialized
  593. [ 1.592010] Bluetooth: RFCOMM ver 1.11
  594. [ 1.592102] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  595. [ 1.592285] Bluetooth: BNEP filters: protocol multicast
  596. [ 1.592376] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  597. [ 1.592681] NET: Registered protocol family 35
  598. [ 1.592895] Registering the dns_resolver key type
  599. [ 1.593048] VFP support v0.3: implementor 51 architecture 64 part 2d variant 0 rev 0
  600. [ 1.593322] Registering SWP/SWPB emulation handler
  601. [ 1.602020] clock_late_init() disabled 183 unused clocks
  602. [ 1.643280] MSM Watchdog Not Initialized
  603. [ 1.647277] set_dload_mode <0> ( C0017244 )
  604. [ 1.648529] [TKEY] touchkey_init START
  605. [ 1.648651] is_lpcharging_state: is_lpm_boot:0
  606. [ 1.649658] [TKEY] touchkey_init F/W version: 0x4, Module version:0x2, HW_REV: 0xc
  607. [ 1.649902] [TKEY] sec i2c_touchkey_probe
  608. [ 1.650146] input: sec_touchkey as /devices/virtual/input/input11
  609. [ 1.651702] [TouchKey] touchkey_autocalibration :data[0]=8 data[1]=4 data[2]=2 data[3]=0
  610. [ 1.674682] mmc0: new high speed MMC card at address 0001
  611. [ 1.675048] mmcblk0: mmc0:0001 KYL00M 14.6 GiB
  612. [ 1.675384] mmcblk0boot0: mmc0:0001 KYL00M partition 1 512 KiB
  613. [ 1.675628] mmcblk0boot1: mmc0:0001 KYL00M partition 2 512 KiB
  614. [ 1.680450] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 >
  615. [ 1.685577] mmcblk0boot1: unknown partition table
  616. [ 1.687713] mmcblk0boot0: unknown partition table
  617. [ 1.761657] [Touchkey] autocal Enabled
  618. [ 1.792816] [TKEY] after touchkey_auto_calibration result = 1
  619. [ 1.792999] [TKEY] touchkey_init END
  620. [ 1.793151] is_lpcharging_state: is_lpm_boot:0
  621. [ 1.793273] [E-PEN]: wacom_i2c_init: Sleep type-PEN_SLP pin
  622. [ 1.793395] [E-PEN]:wacom_i2c_probe:
  623. [ 1.793579] [E-PEN] wacom_init_hw : Power On
  624. [ 1.793670] [E-PEN] wacom_gpio_init
  625. [ 1.866058] gpio_request: gpio-251 (SD_WP_Switch) status -22
  626. [ 1.866180] msm_sdc3_get_wpswitch:Failed to request GPIO 251
  627. [ 1.866333] mmc2: host does not support reading read-only switch. assuming write-enable.
  628. [ 1.869323] mmc2: new high speed SDHC card at address aaaa
  629. [ 1.869781] mmcblk1: mmc2:aaaa SL16G 14.8 GiB
  630. [ 1.873870] mmcblk1: p3
  631. [ 1.992492] mmc4: host doesn't support card's voltages
  632. [ 1.992675] mmc4: error -22 whilst initialising SDIO card
  633. [ 1.994293] mmc4: host doesn't support card's voltages
  634. [ 1.994476] mmc4: error -22 whilst initialising MMC card
  635. [ 2.000640] [E-PEN] (wacom_init_hw) GPIO_PEN_RESET= [1]
  636. [ 2.000823] [E-PEN] (wacom_init_hw) GPIO_PEN_SLP = [0]
  637. [ 2.000915] [E-PEN] (wacom_init_hw) GPIO_PEN_PDCT = [0]
  638. [ 2.001098] [E-PEN] (wacom_init_hw) GPIO_PEN_IRQ = [0]
  639. [ 2.001190] [E-PEN] (wacom_init_hw) Power Logig init end
  640. [ 2.001342] [E-PEN] wacom_register_callbacks
  641. [ 2.001464] [E-PEN] Wacom driver is working for 4.4mm pitch pad.
  642. [ 2.001556] [E-PEN] Use 4.4mm pitch Offset tables
  643. [ 2.161590] [E-PEN]: wacom_i2c_query: 0th ret of wacom query=2
  644. [ 2.161682] [E-PEN]: 0, 0, 0, 0, 0, 0, 0, FF, FF fw=0xffff
  645. [ 2.162353] [E-PEN]: wacom_i2c_query: 2th ret of wacom query=2
  646. [ 2.162445] [E-PEN]: x_max=0x2C80
  647. [ 2.162597] [E-PEN]: y_max=0x1BD0
  648. [ 2.162689] [E-PEN]: pressure_max=0xFF
  649. [ 2.162780] [E-PEN]: fw_version=0x404 (d7:0x4,d8:0x4)
  650. [ 2.162933] [E-PEN]: F, 31, D8, 20, A8, 0, FF, 4, 4
  651. [ 2.163208] input: sec_e-pen as /devices/i2c-18/18-0056/input/input12
  652. [ 2.164489] [E-PEN] wacom fw ver : 0x404, new fw ver : 0x404
  653. [ 2.164611] [E-PEN]: Verify CHECKSUM.
  654. [ 2.371276] [E-PEN] received checksum 1f, b5, 41, b7, 7f
  655. [ 2.371398] [E-PEN] epen_checksum_read_atBoot, result 1
  656. [ 2.401306] rtc-pm8xxx rtc-pm8xxx: setting system clock to 1970-01-01 00:37:27 UTC (2247)
  657. [ 2.401580] sec-battery sec-battery: sec_bat_probe: SEC Battery Driver Loading
  658. [ 2.402130] sec_bat_get_lpcharging_state: LP charging:0
  659. [ 2.403900] [fg] p:8677, s1:91, s2:100, v:3978750, t:0
  660. [ 2.404144] sec_bat_measure_work: adc work already on a queue
  661. [ 2.408264] EXT3-fs (mmcblk1p3): error: couldn't mount because of unsupported optional features (240)
  662. [ 2.410705] param_sec_operation: filp_open failed. (-2)
  663. [ 2.410888] sec_open_param PARAM OPEN FAIL
  664. [ 2.410980] sec_switch_init_work error value = 3
  665. [ 2.440673] pmic8058_xoadc:The offset for AMUX calibrationwas -561
  666. [ 2.441223] EXT2-fs (mmcblk1p3): error: couldn't mount because of unsupported optional features (240)
  667. [ 2.553131] zcache: created ephemeral tmem pool, id=0, client=65535
  668. [ 2.555633] EXT4-fs (mmcblk1p3): mounted filesystem with ordered data mode. Opts: (null)
  669. [ 2.555847] VFS: Mounted root (ext4 filesystem) on device 179:99.
  670. [ 2.556213] Freeing init memory: 344K
  671. [ 2.841033] sec_jack:sec_jack_det_irq_handler : ready = 1.
  672. [ 2.841156] sec_jack: ear micbias off
  673. [ 3.101623] audience_a2220B:a2220_bootup_init : lsj::a2220_bootup_init 5
  674. [ 3.102142] audience_a2220B:a2220_bootup_init : lsj::a2220_bootup_init 6
  675. [ 3.102355] audience_a2220B:a2220_bootup_init : lsj::a2220_bootup_init 7
  676. [ 3.131072] a2220_bootup_init: firmware loaded successfully
  677. [ 3.161254] systemd[1]: systemd 208 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
  678. [ 3.212646] systemd[1]: Failed to insert module 'autofs4'
  679. [ 3.214202] systemd[1]: Set hostname to <debian-armhf>.
  680. [ 3.341522] audience_a2220B:execute_cmdmsg : execute_cmdmsg CHK :: 80 0 0 0
  681. [ 3.341735] audience_a2220B:execute_cmdmsg : execute_cmdmsg :: 80 0 0 0
  682. [ 3.341857] audience_a2220B:a2220_bootup_init : lsj::a2220_bootup_init 8
  683. [ 3.342041] audience_a2220B:a2220_bootup_init : get_hw_rev of Target = 12
  684. [ 3.342163] [AUD] new mode =20
  685. [ 3.342651] audience_a2220B:execute_cmdmsg : execute_cmdmsg CHK :: 80 52 0 48
  686. [ 3.342803] audience_a2220B:execute_cmdmsg : execute_cmdmsg :: 80 52 0 48
  687. [ 3.343322] audience_a2220B:execute_cmdmsg : execute_cmdmsg CHK :: 80 52 0 5c
  688. [ 3.343444] audience_a2220B:execute_cmdmsg : execute_cmdmsg :: 80 52 0 5c
  689. [ 3.347015] audience_a2220B:execute_cmdmsg : ...go to suspend first
  690. [ 3.347229] audience_a2220B:a2220_bootup_init : a2220_bootup_init - finish
  691. [ 3.365112] systemd-fstab-generator[127]: Mount point ext4 is not a valid path, ignoring.
  692. [ 3.411193] sec_bat_polling_work: adc work already on a queue
  693. [ 3.411346] param_sec_operation: filp_open failed. (-2)
  694. [ 3.411529] sec_open_param PARAM OPEN FAIL
  695. [ 3.411621] sec_switch_init_work error value = 3
  696. [ 3.614227] systemd[1]: Cannot add dependency job for unit systemd-vconsole-setup.service, ignoring: Unit systemd-vconsole-setup.service failed to load: No such file or directory.
  697. [ 3.615936] systemd[1]: Starting Syslog Socket.
  698. [ 3.616546] systemd[1]: Listening on Syslog Socket.
  699. [ 3.616729] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
  700. [ 3.617218] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  701. [ 3.617370] systemd[1]: Starting Remote File Systems (Pre).
  702. [ 3.617736] systemd[1]: Reached target Remote File Systems (Pre).
  703. [ 3.617889] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
  704. [ 3.618316] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  705. [ 3.618560] systemd[1]: Starting Delayed Shutdown Socket.
  706. [ 3.618896] systemd[1]: Listening on Delayed Shutdown Socket.
  707. [ 3.619140] systemd[1]: Starting udev Kernel Socket.
  708. [ 3.619506] systemd[1]: Listening on udev Kernel Socket.
  709. [ 3.619689] systemd[1]: Starting udev Control Socket.
  710. [ 3.620117] systemd[1]: Listening on udev Control Socket.
  711. [ 3.620269] systemd[1]: Starting Encrypted Volumes.
  712. [ 3.620605] systemd[1]: Reached target Encrypted Volumes.
  713. [ 3.620941] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
  714. [ 3.621185] systemd[1]: Starting Journal Socket.
  715. [ 3.621765] systemd[1]: Listening on Journal Socket.
  716. [ 3.621948] systemd[1]: Starting Nameserver information manager...
  717. [ 3.732330] systemd[1]: Starting Syslog.
  718. [ 3.732788] systemd[1]: Reached target Syslog.
  719. [ 3.735870] systemd[1]: Starting Load Kernel Modules...
  720. [ 3.975585] systemd[1]: Starting Apply Kernel Variables...
  721. [ 4.312103] systemd[1]: Mounting Debug File System...
  722. [ 4.411499] param_sec_operation: filp_open failed. (-2)
  723. [ 4.411590] sec_open_param PARAM OPEN FAIL
  724. [ 4.411682] sec_switch_init_work error value = 3
  725. [ 4.633422] wifi_set_power = 1
  726. [ 4.633514] brcm_wlan_power: 1
  727. [ 4.661956] systemd[1]: Mounted POSIX Message Queue File System.
  728. [ 4.662567] systemd[1]: Starting Create list of required static device nodes for the current kernel...
  729. [ 4.721496] wifi_set_carddetect = 1
  730. [ 4.721618] msm_device_sdc4.name= 4
  731. [ 4.836486] mmc3: queuing unknown CIS tuple 0x80 (7 bytes)
  732. [ 4.839263] mmc3: queuing unknown CIS tuple 0x80 (6 bytes)
  733. [ 4.897308] mmc3: new high speed SDIO card at address 0001
  734. [ 4.899597] alloc static buf at d99c0000!
  735. [ 4.900115] dhdsdio_probe : no mutex held. set lock
  736. [ 4.900421] F1 signature read @0x18000000=0x16844330
  737. [ 4.904815] DHD: dongle ram size is set to 294912(orig 294912)
  738. [ 4.905853] CFG80211-INFO2) wl_event_handler : tsk Enter, tsk = 0xd89b8550
  739. [ 4.906066] wl_create_event_handler thr:89 created
  740. [ 4.907012] p2p0: P2P Interface Registered
  741. [ 4.907257] dhd_attach thr:8a created
  742. [ 4.907470] dhd_attach thr:8b created
  743. [ 4.907714] dhd_attach thr:8c created
  744. [ 4.952667] PR85623WAR in place
  745. [ 4.953460] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
  746. [ 4.972198] systemd[1]: Mounted Huge Pages File System.
  747. [ 4.974456] systemd[1]: Started Set Up Additional Binary Formats.
  748. [ 4.974761] systemd[1]: Starting udev Coldplug all Devices...
  749. [ 5.112121] systemd[1]: Starting Journal Service...
  750. [ 5.128662] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
  751. [ 5.132537] dhd_wl_ioctl: WLC_GET_VAR: cisdump, ret = -23
  752. [ 5.136932] Firmware up: op_mode=0x0005, Broadcom Dongle Host Driver mac=00:23:a7
  753. [ 5.142242] POWER_VAL = 1
  754. [ 5.150543] dhd_wl_ioctl: WLC_GET_VAR: arp_version, ret = -23
  755. [ 5.154693] Firmware version = wl0: Dec 5 2012 00:59:58 version 5.99.10 (JB) (WFD)
  756. [ 5.155670] [WIFI] /efs/wifi/.mac.info: File open error
  757. [ 5.156402] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:23:a7
  758. [ 5.156585] dhdsdio_probe : the lock is released.
  759. [ 5.156738]
  760. [ 5.156738] Dongle Host Driver, version 1.28.19.9 (RC1_0107)
  761. [ 5.156768] Compiled in drivers/net/wireless/bcmdhd on Aug 21 2014 at 17:41:06
  762. [ 5.411529] param_sec_operation: filp_open failed. (-2)
  763. [ 5.411651] sec_open_param PARAM OPEN FAIL
  764. [ 5.411743] sec_switch_init_work error value = 3
  765. [ 5.532623] systemd[1]: Started Journal Service.
  766. [ 6.411590] param_sec_operation: filp_open failed. (-2)
  767. [ 6.411773] sec_open_param PARAM OPEN FAIL
  768. [ 6.411895] sec_switch_init_work error value = 3
  769. [ 6.511993] [TSP] mxt_reconfigration_normal execute!!
  770. [ 6.592926] smb328a_check_bmd_disabled : return ture : reg(0x5)=0x8b (0x80)
  771. [ 7.148193] systemd-udevd[168]: starting version 208
  772. [ 7.411621] param_sec_operation: filp_open failed. (-2)
  773. [ 7.411743] sec_open_param PARAM OPEN FAIL
  774. [ 7.411895] sec_switch_init_work error value = 3
  775. [ 7.531616] fsa9480 5-0025: fsa9480_init_detect
  776. [ 7.532745] fsa9480 5-0025: dev1: 0x0, dev2: 0x0
  777. [ 7.624755] smb328a_check_bmd_disabled : return ture : reg(0x5)=0x8b (0x80)
  778. [ 7.626770] smb328a_check_bmd_disabled : return ture : reg(0x5)=0x8b (0x80)
  779. [ 7.629028] smb328a_check_bmd_disabled : return ture : reg(0x5)=0x8b (0x80)
  780. [ 7.642944] [VIBETONZ:WJYOO] MISC_REGISTER nRet = 0
  781. [ 7.643402] THNAK YOU!!
  782. [ 7.643646] vibrator I2C attach success!!!
  783. [ 7.643829] [VIBETONZ] ImmVibeSPI_ForceOut_Initialize
  784. [ 7.663787] [VIBETONZ] ImmVibeSPI_ForceOut_AmpDisable
  785. [ 7.664398] vib_power_onoff: start! (144)
  786. [ 8.411560] param_sec_operation: filp_open failed. (-2)
  787. [ 8.411743] sec_open_param PARAM OPEN FAIL
  788. [ 8.411834] sec_switch_init_work error value = 3
  789. [ 9.411590] param_sec_operation: filp_open failed. (-2)
  790. [ 9.411773] sec_open_param PARAM OPEN FAIL
  791. [ 9.411895] sec_switch_init_work error value = 3
  792. [ 9.894042] systemd-journald[142]: Received request to flush runtime journal from PID 1
  793. [ 10.411590] param_sec_operation: filp_open failed. (-2)
  794. [ 10.411804] sec_open_param PARAM OPEN FAIL
  795. [ 10.411895] sec_switch_init_work error value = 3
  796. [ 10.681060]
  797. [ 10.681060] Dongle Host Driver, version 1.28.19.9 (RC1_0107)
  798. [ 10.681091] Compiled in drivers/net/wireless/bcmdhd on Aug 21 2014 at 17:41:06
  799. [ 10.692871] CFG80211-INFO2) wl_cfg80211_attach_post : p2p0: p2p_dev_addr=02:23:a7
  800. [ 11.411560] param_sec_operation: filp_open failed. (-2)
  801. [ 11.411651] sec_open_param PARAM OPEN FAIL
  802. [ 11.411773] sec_switch_init_work failed 10 times... So switch_sel is set by [1]
  803. [ 11.411926] sec_switch_init_work value = 1
  804. [ 11.412048] sec_switch_set_vbus_status USB_VBUS_AP_ON 2
  805. [ 11.422210] fsa9480_manual_switching(0)
  806. [ 11.684356] dhd_wl_ioctl: WLC_IOCTL: cmd: 23, ret = -17
  807. [ 12.093231] wl_bss_connect_done succeeded with 20:68:9a
  808. [ 12.154968] wl_bss_connect_done succeeded with 20:68:9a
  809. [ 24.291137] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
  810. [ 24.311798] [Mipi_LCD] lcd_off : Draw Black screen.
  811. [ 24.318878] [Mipi_LCD] lcd_off +
  812. [ 24.318908] [Mipi_LCD] lcd_off_seq
  813. [ 24.318939] [Mipi_LCD_ESD] set_lcd_esd_ignore : 1
  814. [ 24.332183] [Mipi_LCD_ESD] sec_esd_work_func
  815. [ 24.332244] [Mipi_LCD_ESD] sec_esd_work_func : 1 ignore Cnt(1)
  816. [ 24.461791] [Mipi_LCD] lcd_off -
  817. [ 24.461914] [Mipi_LCD] mipi_S6E8AA0_panel_power: Enable=0, Q1_ATT seq
  818. [ 24.506256] [Mipi_LCD] mipi_S6E8AA0_panel_power: Enable=1, Q1_ATT seq
  819. [ 24.522064] [Mipi_LCD] mipi_S6E8AA0_panel_gpio_init
  820. [ 24.583221] [Mipi_LCD] lcd_on
  821. [ 24.583312] [Mipi_LCD] lcd_on_seq +
  822. [ 24.642669] [Mipi_LCD] SDIMMING(12=150cd) ELVSS(12->12,1f+d:9f) ACL(ON:150,45)
  823. [ 24.771820] [Mipi_LCD] lcd_on_seq - : gamma=12, ACl=12, Elvss=12
  824. [ 24.778137] mdp4_csc_config: Block type 10 isn't supported by CSC.
  825. [ 24.778228] mdp4_csc_config: Block type 8 isn't supported by CSC.
  826. [ 24.783172] mdp_enable_irq: MDP IRQ term-0x1 is already set, mask=1 irq=1
  827. [ 24.822784] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
  828. [ 24.852508] [Mipi_LCD] lcd_off : Draw Black screen.
  829. [ 24.865692] [Mipi_LCD] lcd_off +
  830. [ 24.865722] [Mipi_LCD] lcd_off_seq
  831. [ 24.865753] [Mipi_LCD_ESD] set_lcd_esd_ignore : 1
  832. [ 24.882720] [Mipi_LCD_ESD] sec_esd_work_func
  833. [ 24.882781] [Mipi_LCD_ESD] sec_esd_work_func : 2 ignore FLAG
  834. [ 25.011749] [Mipi_LCD] lcd_off -
  835. [ 25.011962] [Mipi_LCD] mipi_S6E8AA0_panel_power: Enable=0, Q1_ATT seq
  836. [ 26.221954] [Mipi_LCD] mipi_S6E8AA0_panel_power: Enable=1, Q1_ATT seq
  837. [ 26.242004] [Mipi_LCD] mipi_S6E8AA0_panel_gpio_init
  838. [ 26.303375] [Mipi_LCD] lcd_on
  839. [ 26.303436] [Mipi_LCD] lcd_on_seq +
  840. [ 26.362884] [Mipi_LCD] SDIMMING(12=150cd) ELVSS(12->12,1f+d:9f) ACL(ON:150,45)
  841. [ 26.491882] [Mipi_LCD] lcd_on_seq - : gamma=12, ACl=12, Elvss=12
  842. [ 26.498413] mdp4_csc_config: Block type 10 isn't supported by CSC.
  843. [ 26.498504] mdp4_csc_config: Block type 8 isn't supported by CSC.
  844. [ 32.265533] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
  845. [ 32.292388] [Mipi_LCD] lcd_off : Draw Black screen.
  846. [ 32.306030] [Mipi_LCD] lcd_off +
  847. [ 32.306060] [Mipi_LCD] lcd_off_seq
  848. [ 32.306091] [Mipi_LCD_ESD] set_lcd_esd_ignore : 1
  849. [ 32.322723] [Mipi_LCD_ESD] sec_esd_work_func
  850. [ 32.322814] [Mipi_LCD_ESD] sec_esd_work_func : 3 ignore FLAG
  851. [ 32.453002] [Mipi_LCD] lcd_off -
  852. [ 32.453155] [Mipi_LCD] mipi_S6E8AA0_panel_power: Enable=0, Q1_ATT seq
  853. [ 32.496734] [Mipi_LCD] mipi_S6E8AA0_panel_power: Enable=1, Q1_ATT seq
  854. [ 32.512725] [Mipi_LCD] mipi_S6E8AA0_panel_gpio_init
  855. [ 32.574737] [Mipi_LCD] lcd_on
  856. [ 32.574829] [Mipi_LCD] lcd_on_seq +
  857. [ 32.633239] [Mipi_LCD] SDIMMING(12=150cd) ELVSS(12->12,1f+d:9f) ACL(ON:150,45)
  858. [ 32.762542] [Mipi_LCD] lcd_on_seq - : gamma=12, ACl=12, Elvss=12
  859. [ 32.769012] mdp4_csc_config: Block type 10 isn't supported by CSC.
  860. [ 32.769104] mdp4_csc_config: Block type 8 isn't supported by CSC.
  861. [ 32.773956] mdp_enable_irq: MDP IRQ term-0x1 is already set, mask=1 irq=1
  862. [ 34.349914] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
  863. [ 34.372375] [Mipi_LCD] lcd_off : Draw Black screen.
  864. [ 34.387664] [Mipi_LCD] lcd_off +
  865. [ 34.387695] [Mipi_LCD] lcd_off_seq
  866. [ 34.387725] [Mipi_LCD_ESD] set_lcd_esd_ignore : 1
  867. [ 34.402557] [Mipi_LCD_ESD] sec_esd_work_func
  868. [ 34.402618] [Mipi_LCD_ESD] sec_esd_work_func : 4 ignore FLAG
  869. [ 34.532318] [Mipi_LCD] lcd_off -
  870. [ 34.532501] [Mipi_LCD] mipi_S6E8AA0_panel_power: Enable=0, Q1_ATT seq
  871. [ 34.576812] [Mipi_LCD] mipi_S6E8AA0_panel_power: Enable=1, Q1_ATT seq
  872. [ 34.592742] [Mipi_LCD] mipi_S6E8AA0_panel_gpio_init
  873. [ 34.653869] [Mipi_LCD] lcd_on
  874. [ 34.653930] [Mipi_LCD] lcd_on_seq +
  875. [ 34.713928] [Mipi_LCD] SDIMMING(12=150cd) ELVSS(12->12,1f+d:9f) ACL(ON:150,45)
  876. [ 34.842437] [Mipi_LCD] lcd_on_seq - : gamma=12, ACl=12, Elvss=12
  877. [ 34.848999] mdp4_csc_config: Block type 10 isn't supported by CSC.
  878. [ 34.849090] mdp4_csc_config: Block type 8 isn't supported by CSC.
  879. [ 34.854003] mdp_enable_irq: MDP IRQ term-0x1 is already set, mask=1 irq=1
  880. [ 34.890624] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
  881. [ 34.912597] [Mipi_LCD] lcd_off : Draw Black screen.
  882. [ 34.928070] [Mipi_LCD] lcd_off +
  883. [ 34.928100] [Mipi_LCD] lcd_off_seq
  884. [ 34.928131] [Mipi_LCD_ESD] set_lcd_esd_ignore : 1
  885. [ 34.942535] [Mipi_LCD_ESD] sec_esd_work_func
  886. [ 34.942565] [Mipi_LCD_ESD] sec_esd_work_func : 5 ignore FLAG
  887. [ 35.072448] [Mipi_LCD] lcd_off -
  888. [ 35.072601] [Mipi_LCD] mipi_S6E8AA0_panel_power: Enable=0, Q1_ATT seq
  889. [ 35.754577] [Mipi_LCD] mipi_S6E8AA0_panel_power: Enable=1, Q1_ATT seq
  890. [ 35.772796] [Mipi_LCD] mipi_S6E8AA0_panel_gpio_init
  891. [ 35.833496] [Mipi_LCD] lcd_on
  892. [ 35.833587] [Mipi_LCD] lcd_on_seq +
  893. [ 35.893554] [Mipi_LCD] SDIMMING(12=150cd) ELVSS(12->12,1f+d:9f) ACL(ON:150,45)
  894. [ 36.022460] [Mipi_LCD] lcd_on_seq - : gamma=12, ACl=12, Elvss=12
  895. [ 36.028961] mdp4_csc_config: Block type 10 isn't supported by CSC.
  896. [ 36.029052] mdp4_csc_config: Block type 8 isn't supported by CSC.
  897. [ 38.117034] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
  898. [ 38.142303] [Mipi_LCD] lcd_off : Draw Black screen.
  899. [ 38.156127] [Mipi_LCD] lcd_off +
  900. [ 38.156158] [Mipi_LCD] lcd_off_seq
  901. [ 38.156188] [Mipi_LCD_ESD] set_lcd_esd_ignore : 1
  902. [ 38.172576] [Mipi_LCD_ESD] sec_esd_work_func
  903. [ 38.172637] [Mipi_LCD_ESD] sec_esd_work_func : 6 ignore FLAG
  904. [ 38.302368] [Mipi_LCD] lcd_off -
  905. [ 38.302520] [Mipi_LCD] mipi_S6E8AA0_panel_power: Enable=0, Q1_ATT seq
  906. [ 38.345916] [Mipi_LCD] mipi_S6E8AA0_panel_power: Enable=1, Q1_ATT seq
  907. [ 38.362640] [Mipi_LCD] mipi_S6E8AA0_panel_gpio_init
  908. [ 38.423095] [Mipi_LCD] lcd_on
  909. [ 38.423156] [Mipi_LCD] lcd_on_seq +
  910. [ 38.483551] [Mipi_LCD] SDIMMING(12=150cd) ELVSS(12->12,1f+d:9f) ACL(ON:150,45)
  911. [ 38.612518] [Mipi_LCD] lcd_on_seq - : gamma=12, ACl=12, Elvss=12
  912. [ 38.618896] mdp4_csc_config: Block type 10 isn't supported by CSC.
  913. [ 38.618988] mdp4_csc_config: Block type 8 isn't supported by CSC.
  914. [ 38.634582] mdp_enable_irq: MDP IRQ term-0x1 is already set, mask=1 irq=1
  915. [ 59.316711] [TSP] ID-0, UD:1
  916. [ 59.383789] [TSP] ID-0, UD:0
  917. [ 59.740264] mdp_enable_irq: MDP IRQ term-0x1 is already set, mask=1 irq=1
  918. [ 59.760498] mdp_enable_irq: MDP IRQ term-0x1 is already set, mask=1 irq=1
  919. [ 64.765197] fsa9480 5-0025: fsa9480_Check_AVDock intr: 0x1
  920. [ 64.766906] fsa9480 5-0025: dev1: 0x80, dev2: 0x0
  921. [ 64.767730] fsa9480 5-0025: otg connect
  922. [ 64.774841] msm_otg_resume: usb exited from low power mode
  923. [ 64.776519] msm_otg_irq: IRQ state: b_idle otgsc = 9210020
  924. [ 64.777374] msm_otg_irq HOST irq
  925. [ 64.794647] msm_hsusb_smb328a_vbus_power attached 1
  926. [ 64.796569] smb328a 15-0034: smb328a_allow_volatile_writes : reg (0x31) = 0x0
  927. [ 64.798767] smb328a_allow_volatile_writes : => reg (0x31) = 0x80
  928. [ 64.800598] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x0) = 0x31
  929. [ 64.802795] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x0) = 0x17
  930. [ 64.806396] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x1) = 0x5
  931. [ 64.807495] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x1) = 0x10
  932. [ 64.808227] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x2) = 0xca
  933. [ 64.808959] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x3) = 0x1a
  934. [ 64.810028] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x3) = 0xda
  935. [ 64.810668] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x4) = 0x44
  936. [ 64.811767] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x4) = 0x4d
  937. [ 64.812591] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x5) = 0x8b
  938. [ 64.813568] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x5) = 0x0
  939. [ 64.814270] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x6) = 0x5c
  940. [ 64.816467] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x6) = 0xd5
  941. [ 64.817016] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x7) = 0x36
  942. [ 64.817962] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x7) = 0xf6
  943. [ 64.818572] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x8) = 0x0
  944. [ 64.819122] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x9) = 0x0
  945. [ 64.820068] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x9) = 0x1
  946. [ 64.820281] smb328a 15-0034: smb328a_enable_otg :
  947. [ 64.820800] smb328a 15-0034: smb328a_enable_otg : reg (0x31) = 0x80
  948. [ 64.821716] smb328a 15-0034: smb328a_enable_otg : => reg (0x31) = 0xbb
  949. [ 64.873504] msm_otg_irq: IRQ state: a_wait_vrise otgsc = 92c2c20
  950. [ 64.873748] msm_otg msm_otg: Acc power on detect
  951. [ 64.905639] [OTG] msm_otg_start_host, on = 1
  952. [ 64.906158] host_notify: ndev name=usb_otg: from state=0 -> to state=1
  953. [ 64.907226] msm_hsusb_host msm_hsusb_host.0: Qualcomm On-Chip EHCI Host Controller
  954. [ 64.908203] msm_hsusb_host msm_hsusb_host.0: new USB bus registered, assigned bus number 1
  955. [ 64.909057] msm_hsusb_host msm_hsusb_host.0: irq 132, io base 0x12500000
  956. [ 64.910247] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  957. [ 64.911102] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  958. [ 64.911682] usb usb1: Product: Qualcomm On-Chip EHCI Host Controller
  959. [ 64.912536] usb usb1: Manufacturer: Linux 3.0.89-cyanogenmod-g00d3f9b ehci_hcd
  960. [ 64.913421] usb usb1: SerialNumber: msm_hsusb_host.0
  961. [ 64.916961] hub 1-0:1.0: USB hub found
  962. [ 64.917541] hub 1-0:1.0: 1 port detected
  963. [ 67.065338] msm_otg_suspend: usb in low power mode
  964. [ 68.911071] msm_otg_resume: usb exited from low power mode
  965. [ 68.911956] [OTG] msm_otg_start_host, on = 2
  966. [ 68.912506] msm_otg_irq: IRQ state: a_wait_bcon otgsc = 9222e20
  967. [ 68.999877] msm_otg_irq: IRQ state: a_wait_bcon otgsc = 9222e20
  968. [ 69.064666] usb 1-1: new full speed USB device number 2 using msm_hsusb_host
  969. [ 69.122344] msm_otg_irq: IRQ state: a_wait_bcon otgsc = 9222e20
  970. [ 69.220275] usb 1-1: New USB device found, idVendor=413c, idProduct=1002
  971. [ 69.221160] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  972. [ 69.221710] usb 1-1: Product: Dell USB Keyboard Hub
  973. [ 69.222534] usb 1-1: Manufacturer: Dell
  974. [ 69.229583] hub 1-1:1.0: USB hub found
  975. [ 69.231262] hub 1-1:1.0: 3 ports detected
  976. [ 69.515350] usb 1-1.1: new full speed USB device number 3 using msm_hsusb_host
  977. [ 69.630279] usb 1-1.1: New USB device found, idVendor=413c, idProduct=2002
  978. [ 69.631164] usb 1-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  979. [ 69.632049] usb 1-1.1: Product: Dell USB Keyboard Hub
  980. [ 69.632568] usb 1-1.1: Manufacturer: Dell
  981. [ 69.648468] input: Dell Dell USB Keyboard Hub as /devices/platform/msm_hsusb_host.0/usb1/1-1/1-1.1/1-1.1:1.0/input/input13
  982. [ 69.666351] input: Dell Dell USB Keyboard Hub as /devices/platform/msm_hsusb_host.0/usb1/1-1/1-1.1/1-1.1:1.1/input/input14
  983. [ 69.755279] usb 1-1.3: new low speed USB device number 4 using msm_hsusb_host
  984. [ 69.870269] usb 1-1.3: New USB device found, idVendor=0461, idProduct=4d22
  985. [ 69.871154] usb 1-1.3: New USB device strings: Mfr=0, Product=2, SerialNumber=0
  986. [ 69.871704] usb 1-1.3: Product: USB Optical Mouse
  987. [ 69.888153] input: USB Optical Mouse as /devices/platform/msm_hsusb_host.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input15
  988. [ 128.316864] [fg] p:8591, s1:90, s2:91, v:3957500, t:854
  989. [ 160.013488] mdp_enable_irq: MDP IRQ term-0x1 is already set, mask=1 irq=1
  990. [ 160.046874] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
  991. [ 160.074523] [Mipi_LCD] lcd_off : Draw Black screen.
  992. [ 160.088287] [Mipi_LCD] lcd_off +
  993. [ 160.088317] [Mipi_LCD] lcd_off_seq
  994. [ 160.088348] [Mipi_LCD_ESD] set_lcd_esd_ignore : 1
  995. [ 160.105529] [Mipi_LCD_ESD] sec_esd_work_func
  996. [ 160.105621] [Mipi_LCD_ESD] sec_esd_work_func : 7 ignore FLAG
  997. [ 160.234558] [Mipi_LCD] lcd_off -
  998. [ 160.234710] [Mipi_LCD] mipi_S6E8AA0_panel_power: Enable=0, Q1_ATT seq
  999. [ 160.278991] [Mipi_LCD] mipi_S6E8AA0_panel_power: Enable=1, Q1_ATT seq
  1000. [ 160.294921] [Mipi_LCD] mipi_S6E8AA0_panel_gpio_init
  1001. [ 160.355682] [Mipi_LCD] lcd_on
  1002. [ 160.355743] [Mipi_LCD] lcd_on_seq +
  1003. [ 160.415802] [Mipi_LCD] SDIMMING(12=150cd) ELVSS(12->12,1f+d:9f) ACL(ON:150,45)
  1004. [ 160.544647] [Mipi_LCD] lcd_on_seq - : gamma=12, ACl=12, Elvss=12
  1005. [ 160.551086] mdp4_csc_config: Block type 10 isn't supported by CSC.
  1006. [ 160.551177] mdp4_csc_config: Block type 8 isn't supported by CSC.
  1007. [ 160.556030] mdp_enable_irq: MDP IRQ term-0x1 is already set, mask=1 irq=1
  1008. [ 160.592773] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
  1009. [ 160.615264] [Mipi_LCD] lcd_off : Draw Black screen.
  1010. [ 160.625823] [Mipi_LCD] lcd_off +
  1011. [ 160.625854] [Mipi_LCD] lcd_off_seq
  1012. [ 160.625854] [Mipi_LCD_ESD] set_lcd_esd_ignore : 1
  1013. [ 160.645507] [Mipi_LCD_ESD] sec_esd_work_func
  1014. [ 160.645568] [Mipi_LCD_ESD] sec_esd_work_func : 8 ignore FLAG
  1015. [ 160.774597] [Mipi_LCD] lcd_off -
  1016. [ 160.774749] [Mipi_LCD] mipi_S6E8AA0_panel_power: Enable=0, Q1_ATT seq
  1017. [ 161.449127] [Mipi_LCD] mipi_S6E8AA0_panel_power: Enable=1, Q1_ATT seq
  1018. [ 161.465484] [Mipi_LCD] mipi_S6E8AA0_panel_gpio_init
  1019. [ 161.525665] [Mipi_LCD] lcd_on
  1020. [ 161.525726] [Mipi_LCD] lcd_on_seq +
  1021. [ 161.585449] [Mipi_LCD] SDIMMING(12=150cd) ELVSS(12->12,1f+d:9f) ACL(ON:150,45)
  1022. [ 161.715118] [Mipi_LCD] lcd_on_seq - : gamma=12, ACl=12, Elvss=12
  1023. [ 161.721466] mdp4_csc_config: Block type 10 isn't supported by CSC.
  1024. [ 161.721557] mdp4_csc_config: Block type 8 isn't supported by CSC.
  1025. [ 164.570617] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
  1026. [ 164.594543] [Mipi_LCD] lcd_off : Draw Black screen.
  1027. [ 164.608215] [Mipi_LCD] lcd_off +
  1028. [ 164.608245] [Mipi_LCD] lcd_off_seq
  1029. [ 164.608276] [Mipi_LCD_ESD] set_lcd_esd_ignore : 1
  1030. [ 164.624938] [Mipi_LCD_ESD] sec_esd_work_func
  1031. [ 164.625030] [Mipi_LCD_ESD] sec_esd_work_func : 9 ignore FLAG
  1032. [ 164.754577] [Mipi_LCD] lcd_off -
  1033. [ 164.754730] [Mipi_LCD] mipi_S6E8AA0_panel_power: Enable=0, Q1_ATT seq
  1034. [ 164.798919] [Mipi_LCD] mipi_S6E8AA0_panel_power: Enable=1, Q1_ATT seq
  1035. [ 164.815277] [Mipi_LCD] mipi_S6E8AA0_panel_gpio_init
  1036. [ 164.875701] [Mipi_LCD] lcd_on
  1037. [ 164.875793] [Mipi_LCD] lcd_on_seq +
  1038. [ 164.935546] [Mipi_LCD] SDIMMING(12=150cd) ELVSS(12->12,1f+d:9f) ACL(ON:150,45)
  1039. [ 165.064758] [Mipi_LCD] lcd_on_seq - : gamma=12, ACl=12, Elvss=12
  1040. [ 165.071228] mdp4_csc_config: Block type 10 isn't supported by CSC.
  1041. [ 165.071289] mdp4_csc_config: Block type 8 isn't supported by CSC.
  1042. [ 165.076141] mdp_enable_irq: MDP IRQ term-0x1 is already set, mask=1 irq=1
  1043. [ 165.497955] mdp_enable_irq: MDP IRQ term-0x1 is already set, mask=1 irq=1
  1044. [ 181.572845] msm_otg_irq: IRQ state: a_host otgsc = 9230f20
  1045. [ 181.573699] msm_otg_irq HOST irq
  1046. [ 181.574279] [OTG] msm_otg_start_host, on = 0
  1047. [ 181.574920] host_notify: ndev name=usb_otg: from state=1 -> to state=2
  1048. [ 181.575836] msm_otg_irq: IRQ state: a_wait_vfall otgsc = 9202f20
  1049. [ 181.577545] usb 1-1: USB disconnect, device number 2
  1050. [ 181.578399] usb 1-1.1: USB disconnect, device number 3
  1051. [ 181.579986] msm_hsusb_host msm_hsusb_host.0: remove, state 1
  1052. [ 181.580932] usb usb1: USB disconnect, device number 1
  1053. [ 181.856475] usb 1-1.3: USB disconnect, device number 4
  1054. [ 181.928558] hub 1-0:1.0: hub_port_status failed (err = -19)
  1055. [ 181.932678] hub 1-0:1.0: connect-debounce failed, port 1 disabled
  1056. [ 181.967346] msm_hsusb_host msm_hsusb_host.0: USB bus 1 deregistered
  1057. [ 182.194610] msm_hsusb_smb328a_vbus_power attached 0
  1058. [ 182.195526] smb328a 15-0034: smb328a_disable_otg :
  1059. [ 182.196990] smb328a 15-0034: smb328a_disable_otg : reg (0x5) = 0x0
  1060. [ 182.201324] smb328a_int_work_func
  1061. [ 182.202758] smb328a_int_work_func : reg (0x37) = 0x2
  1062. [ 182.204223] smb328a_int_work_func : reg (0x36) = 0x3
  1063. [ 182.206176] sec_bat_set_property: 1
  1064. [ 182.206665] sec_bat_set_property: charger inserted!!
  1065. [ 182.251098] smb328a 15-0034: smb328a_disable_otg : => reg (0x5) = 0x8b
  1066. [ 182.251556] smb328a 15-0034: smb328a_disable_otg : reg (0x31) = 0x0
  1067. [ 182.287567] msm_otg_irq: IRQ state: a_wait_vfall otgsc = 92c2120
  1068. [ 182.287658] msm_otg msm_otg: Acc power off detect
  1069. [ 182.302398] smb328a 15-0034: smb328a_disable_otg : => reg (0x31) = 0xb9
  1070. [ 182.302520] fsa9480 5-0025: fsa9480_otg_detach
  1071. [ 182.433380] fsa9480 5-0025: fsa9480_Check_AVDock intr: 0x2
  1072. [ 182.435089] fsa9480 5-0025: dev1: 0x0, dev2: 0x0
  1073. [ 182.726013] msm_hsusb_pmic_id_notif_init: USB_ID is not routed to PMIC
  1074. [ 182.727325] msm_otg_suspend: usb in low power mode
  1075. [ 186.588226] smb328a_int_work_func
  1076. [ 186.590026] smb328a_int_work_func : reg (0x37) = 0x0
  1077. [ 186.591430] smb328a_int_work_func : reg (0x36) = 0x3
  1078. [ 186.593231] sec_bat_set_property: 1
  1079. [ 186.593688] sec_bat_set_property: charger inserted!!
  1080. [ 186.637664] msm_otg_resume: usb exited from low power mode
  1081. [ 186.639343] msm_otg_irq: IRQ state: b_idle otgsc = 92c0f20
  1082. [ 186.639923] [OTG] msm_otg_start_peripheral, on = 1
  1083. [ 186.802551] fsa9480 5-0025: fsa9480_Check_AVDock intr: 0x1
  1084. [ 186.804260] fsa9480 5-0025: dev1: 0x40, dev2: 0x0
  1085. [ 186.805297] fsa9480 5-0025: charger connect
  1086. [ 186.805816] fsa9480_charger_cb attached 1
  1087. [ 186.806304] [TSP] mxt540e_ta_probe ta_status = 2
  1088. [ 186.810455] sec-battery sec-battery: sec_bat_set_property: cable was changed(2)
  1089. [ 186.831024] [TSP] calibration is on going
  1090. [ 186.843414] [TSP] normal mode
  1091. [ 186.864685] usb_reset: usb: notify offline
  1092. [ 186.865203] usb: composite_disconnect
  1093. [ 186.866027] usb: android_disconnect schedule_work
  1094. [ 186.866882] usb: android_work config= (null),connected=0,sw_connected=0
  1095. [ 186.867797] android_work: did not send uevent (0 0 (null))
  1096. [ 187.316680] max17040_get_rcomp : current rcomp = 0xf01f(240)
  1097. [ 187.317565] smb328a 15-0034: smb328a_set_charging_current :
  1098. [ 187.319000] smb328a 15-0034: smb328a_set_command_reg : reg (0x31) = 0x0
  1099. [ 187.321502] smb328a_set_command_reg : => reg (0x31) = 0xad
  1100. [ 187.323883] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x0) = 0x31
  1101. [ 187.326660] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x0) = 0xb7
  1102. [ 187.328460] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x1) = 0x5
  1103. [ 187.330657] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x1) = 0xb0
  1104. [ 187.332489] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x2) = 0xca
  1105. [ 187.334289] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x3) = 0x1a
  1106. [ 187.336547] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x3) = 0xda
  1107. [ 187.337249] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x4) = 0x44
  1108. [ 187.338317] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x4) = 0x4d
  1109. [ 187.338928] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x5) = 0x8b
  1110. [ 187.339996] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x5) = 0x0
  1111. [ 187.340698] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x6) = 0x5c
  1112. [ 187.341674] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x6) = 0xd5
  1113. [ 187.342376] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x7) = 0x36
  1114. [ 187.343444] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x7) = 0xf6
  1115. [ 187.344055] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x8) = 0x0
  1116. [ 187.345367] smb328a 15-0034: smb328a_charger_function_conrol : reg (0x9) = 0x0
  1117. [ 187.346282] smb328a 15-0034: smb328a_charger_function_conrol : => reg (0x9) = 0x1
  1118. [ 187.346527] smb328a 15-0034: smb328a_get_input_current_limit :
  1119. [ 187.347198] smb328a 15-0034: smb328a_get_input_current_limit : reg (0x1) = 0xb0
  1120. [ 187.347351] smb328a 15-0034: smb328a_get_input_current_limit : get icl = 1000, data = 5
  1121. [ 187.347991] smb328a 15-0034: smb328a_get_float_voltage : reg (0x2) = 0xca, float vol = 4200
  1122. [ 187.348999] smb328a 15-0034: smb328a_set_top_off : reg (0x0) = 0xb7
  1123. [ 187.349853] smb328a 15-0034: smb328a_set_top_off : => reg (0x0) = 0xb7
  1124. [ 187.350463] smb328a 15-0034: smb328a_set_top_off : reg (0x7) = 0xf6
  1125. [ 187.351287] smb328a 15-0034: smb328a_set_top_off : => reg (0x7) = 0xf6
  1126. [ 187.351989] smb328a 15-0034: smb328a_ldo_disable :
  1127. [ 187.352935] smb328a 15-0034: smb328a_ldo_disable : reg (0x6) = 0xd5
  1128. [ 187.353851] smb328a 15-0034: smb328a_ldo_disable : => reg (0x6) = 0xf5
  1129. [ 187.354064] smb328a 15-0034: smb328a_enable_charging :
  1130. [ 187.356048] smb328a 15-0034: smb328a_enable_charging : reg (0x31) = 0xad
  1131. [ 187.356842] smb328a_enable_charging : => reg (0x31) = 0xad
  1132. [ 187.356933] smb328a 15-0034: smb328a_watchdog_control : (1)
  1133. [ 187.357788] smb328a 15-0034: smb328a_watchdog_control : reg (0x4) = 0x4d
  1134. [ 187.358520] smb328a 15-0034: smb328a_watchdog_control : => reg (0x4) = 0x4f
  1135. [ 187.395599] msm_otg_irq: IRQ state: b_peripheral otgsc = 92c2120
  1136. [ 187.396240] [OTG] msm_otg_start_peripheral, on = 0
  1137. [ 187.397064] off mute_switch
  1138. [ 187.397521] usb_do_work: usb: notify offline
  1139. [ 187.398010] usb: composite_disconnect
  1140. [ 187.398803] usb: android_disconnect force_disconnect
  1141. [ 187.399291] usb: android_disconnect schedule_work
  1142. [ 187.400512] usb: android_work config= (null),connected=0,sw_connected=1
  1143. [ 187.401123] android_work: sent uevent USB_STATE=DISCONNECTED
  1144. [ 187.492767] smb328a_int_work_func
  1145. [ 187.494232] smb328a_int_work_func : reg (0x37) = 0x0
  1146. [ 187.495819] smb328a_int_work_func : reg (0x36) = 0x5
  1147. [ 187.497619] sec_bat_set_property: 1
  1148. [ 187.498107] sec_bat_set_property: charger inserted!!
  1149. [ 187.634674] msm_hsusb_pmic_id_notif_init: USB_ID is not routed to PMIC
  1150. [ 187.635681] msm_otg_suspend: usb in low power mode
  1151. [ 191.835388] [TSP] mxt_reconfigration_normal execute!!
  1152. [ 333.328765] [fg] p:8620, s1:91, s2:90, v:4188750, t:847
  1153. [ 496.328948] [fg] p:8706, s1:92, s2:91, v:4190000, t:841
  1154. [ 699.768829] [fg] p:8806, s1:93, s2:92, v:4188750, t:839
  1155. [ 903.170379] [fg] p:8895, s1:94, s2:93, v:4188750, t:834
  1156. [ 1144.318786] [fg] p:8990, s1:95, s2:94, v:4190000, t:825
  1157. [ 1332.639343] mdp_enable_irq: MDP IRQ term-0x1 is already set, mask=1 irq=1
  1158. [ 1332.665710] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
  1159. [ 1332.694519] [Mipi_LCD] lcd_off : Draw Black screen.
  1160. [ 1332.708251] [Mipi_LCD] lcd_off +
  1161. [ 1332.708282] [Mipi_LCD] lcd_off_seq
  1162. [ 1332.708312] [Mipi_LCD_ESD] set_lcd_esd_ignore : 1
  1163. [ 1332.724884] [Mipi_LCD_ESD] sec_esd_work_func
  1164. [ 1332.724945] [Mipi_LCD_ESD] sec_esd_work_func : 10 ignore FLAG
  1165. [ 1332.854553] [Mipi_LCD] lcd_off -
  1166. [ 1332.854705] [Mipi_LCD] mipi_S6E8AA0_panel_power: Enable=0, Q1_ATT seq
  1167. [ 1332.898864] [Mipi_LCD] mipi_S6E8AA0_panel_power: Enable=1, Q1_ATT seq
  1168. [ 1332.914855] [Mipi_LCD] mipi_S6E8AA0_panel_gpio_init
  1169. [ 1332.976013] [Mipi_LCD] lcd_on
  1170. [ 1332.976074] [Mipi_LCD] lcd_on_seq +
  1171. [ 1333.035522] [Mipi_LCD] SDIMMING(12=150cd) ELVSS(12->12,1f+d:9f) ACL(ON:150,45)
  1172. [ 1333.164916] [Mipi_LCD] lcd_on_seq - : gamma=12, ACl=12, Elvss=12
  1173. [ 1333.172973] mdp4_csc_config: Block type 10 isn't supported by CSC.
  1174. [ 1333.173065] mdp4_csc_config: Block type 8 isn't supported by CSC.
  1175. [ 1333.178100] mdp_enable_irq: MDP IRQ term-0x1 is already set, mask=1 irq=1
  1176. [ 1333.220458] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
  1177. [ 1333.245178] [Mipi_LCD] lcd_off : Draw Black screen.
  1178. [ 1333.258392] [Mipi_LCD] lcd_off +
  1179. [ 1333.258422] [Mipi_LCD] lcd_off_seq
  1180. [ 1333.258453] [Mipi_LCD_ESD] set_lcd_esd_ignore : 1
  1181. [ 1333.275573] [Mipi_LCD_ESD] sec_esd_work_func
  1182. [ 1333.275634] [Mipi_LCD_ESD] sec_esd_work_func : 11 ignore FLAG
  1183. [ 1333.404571] [Mipi_LCD] lcd_off -
  1184. [ 1333.404724] [Mipi_LCD] mipi_S6E8AA0_panel_power: Enable=0, Q1_ATT seq
  1185. [ 1334.089843] [Mipi_LCD] mipi_S6E8AA0_panel_power: Enable=1, Q1_ATT seq
  1186. [ 1334.105590] [Mipi_LCD] mipi_S6E8AA0_panel_gpio_init
  1187. [ 1334.165679] [Mipi_LCD] lcd_on
  1188. [ 1334.165740] [Mipi_LCD] lcd_on_seq +
  1189. [ 1334.225524] [Mipi_LCD] SDIMMING(12=150cd) ELVSS(12->12,1f+d:9f) ACL(ON:150,45)
  1190. [ 1334.354675] [Mipi_LCD] lcd_on_seq - : gamma=12, ACl=12, Elvss=12
  1191. [ 1334.361053] mdp4_csc_config: Block type 10 isn't supported by CSC.
  1192. [ 1334.361145] mdp4_csc_config: Block type 8 isn't supported by CSC.
  1193. [ 1335.769683] mdp4_mixer_blend_setup: Error: no bg_pipe at mixer=0
  1194. [ 1335.794525] [Mipi_LCD] lcd_off : Draw Black screen.
  1195. [ 1335.808288] [Mipi_LCD] lcd_off +
  1196. [ 1335.808319] [Mipi_LCD] lcd_off_seq
  1197. [ 1335.808349] [Mipi_LCD_ESD] set_lcd_esd_ignore : 1
  1198. [ 1335.824920] [Mipi_LCD_ESD] sec_esd_work_func
  1199. [ 1335.825012] [Mipi_LCD_ESD] sec_esd_work_func : 12 ignore FLAG
  1200. [ 1335.954589] [Mipi_LCD] lcd_off -
  1201. [ 1335.954742] [Mipi_LCD] mipi_S6E8AA0_panel_power: Enable=0, Q1_ATT seq
  1202. [ 1335.998870] [Mipi_LCD] mipi_S6E8AA0_panel_power: Enable=1, Q1_ATT seq
  1203. [ 1336.014953] [Mipi_LCD] mipi_S6E8AA0_panel_gpio_init
  1204. [ 1336.075775] [Mipi_LCD] lcd_on
  1205. [ 1336.075836] [Mipi_LCD] lcd_on_seq +
  1206. [ 1336.135528] [Mipi_LCD] SDIMMING(12=150cd) ELVSS(12->12,1f+d:9f) ACL(ON:150,45)
  1207. [ 1336.264678] [Mipi_LCD] lcd_on_seq - : gamma=12, ACl=12, Elvss=12
  1208. [ 1336.270996] mdp4_csc_config: Block type 10 isn't supported by CSC.
  1209. [ 1336.271087] mdp4_csc_config: Block type 8 isn't supported by CSC.
  1210. [ 1336.275939] mdp_enable_irq: MDP IRQ term-0x1 is already set, mask=1 irq=1
  1211. [ 1336.317565] mdp_enable_irq: MDP IRQ term-0x1 is already set, mask=1 irq=1
  1212. [ 1382.428894] mdp_enable_irq: MDP IRQ term-0x1 is already set, mask=1 irq=1
  1213. [ 1387.228637] [fg] p:9085, s1:96, s2:95, v:4192500, t:821
  1214. [ 1673.418884] [fg] p:9180, s1:97, s2:96, v:4191250, t:832
  1215. [ 1739.291564] [TSP] ID-0, UD:1
  1216. [ 1740.378692] [TSP] ID-0, UD:0
  1217. [ 1783.016143] mdp_enable_irq: MDP IRQ term-0x1 is already set, mask=1 irq=1
  1218. [ 1783.031616] mdp_enable_irq: MDP IRQ term-0x1 is already set, mask=1 irq=1
  1219. [ 1784.726470] mdp_enable_irq: MDP IRQ term-0x1 is already set, mask=1 irq=1
  1220. [ 1784.738372] mdp_enable_irq: MDP IRQ term-0x1 is already set, mask=1 irq=1
  1221. [ 1787.238952] mdp_enable_irq: MDP IRQ term-0x1 is already set, mask=1 irq=1
  1222. [ 1787.255767] mdp_enable_irq: MDP IRQ term-0x1 is already set, mask=1 irq=1
  1223. [ 1788.801452] mdp_enable_irq: MDP IRQ term-0x1 is already set, mask=1 irq=1
  1224. [ 1788.807739] mdp_enable_irq: MDP IRQ term-0x1 is already set, mask=1 irq=1
  1225. [ 1790.583801] mdp_enable_irq: MDP IRQ term-0x1 is already set, mask=1 irq=1
  1226. [ 1790.601409] mdp_enable_irq: MDP IRQ term-0x1 is already set, mask=1 irq=1
  1227. [ 1840.377502] [TSP] ID-0, UD:1
  1228. [ 1840.461425] [TSP] ID-0, UD:0
  1229. [ 1840.577392] [TSP] ID-0, UD:1
  1230. [ 1840.661437] [TSP] ID-0, UD:0
  1231. [ 1847.130676] mdp_enable_irq: MDP IRQ term-0x1 is already set, mask=1 irq=1
  1232. [ 1847.142028] mdp_enable_irq: MDP IRQ term-0x1 is already set, mask=1 irq=1
  1233. [ 1945.410675] mdp_enable_irq: MDP IRQ term-0x1 is already set, mask=1 irq=1
  1234. [ 1945.428253] mdp_enable_irq: MDP IRQ term-0x1 is already set, mask=1 irq=1
  1235. [ 1957.418884] [fg] p:9275, s1:98, s2:97, v:4192500, t:858
  1236. [ 2325.418823] [fg] p:9370, s1:99, s2:98, v:4191250, t:866
  1237. [ 2380.151336] mdp_enable_irq: MDP IRQ term-0x1 is already set, mask=1 irq=1
  1238. [ 2380.165283] mdp_enable_irq: MDP IRQ term-0x1 is already set, mask=1 irq=1
  1239. [ 2691.198822] [fg] p:9465, s1:100, s2:99, v:4191250, t:867
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!