<6>[    0.000000] Initializing cgroup subsys cpu

<5>[    0.000000] Linux version 2.6.32.15-g31bc15c (root@vm1) (gcc version 4.4.1 (Sourcery G++ Lite 2010q1-202) ) #1 PREEMPT Mon Nov 15 18:31:59 CET 2010

<4>[    0.000000] CPU: ARMv7 Processor [510f00f2] revision 2 (ARMv7), cr=10c53c7f

<4>[    0.000000] CPU: VIPT nonaliasing data cache, VIVT ASID tagged instruction cache

<4>[    0.000000] Machine: htcleo

<4>[    0.000000] Ignoring unrecognised tag 0x00000000

<4>[    0.000000] Memory policy: ECC disabled, Data cache writeback

<7>[    0.000000] On node 0 totalpages: 124864

<7>[    0.000000] free_area_init_node: node 0, pgdat c0599f84, node_mem_map c0bd1000

<7>[    0.000000]   Normal zone: 512 pages used for memmap

<7>[    0.000000]   Normal zone: 0 pages reserved

<7>[    0.000000]   Normal zone: 65024 pages, LIFO batch:15

<7>[    0.000000]   HighMem zone: 464 pages used for memmap

<7>[    0.000000]   HighMem zone: 58864 pages, LIFO batch:15

<6>[    0.000000] allocating 33554432 bytes at c0fa7000 (127a7000 physical) for sf pmem arena

<6>[    0.000000] allocating 35217408 bytes at c2fa7000 (147a7000 physical) for adsp pmem arena

<6>[    0.000000] ram_console: found existing buffer, size 47929, start 47929

<6>[    0.000000] console [ram0] enabled

<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 123888

<5>[    0.000000] Kernel command line: rel_path=CM6HTCLeo

<6>[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)

<6>[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)

<6>[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)

<6>[    0.000000] Memory: 256MB 231MB = 487MB total

<5>[    0.000000] Memory: 417992KB available (5060K code, 2215K data, 404K init, 237312K highmem)

<6>[    0.000000] Hierarchical RCU implementation.

<6>[    0.000000] NR_IRQS:332

<4>[    0.000000] $$$ msm_timer_init $$$

<4>[    0.000000]  1DIV = 00000003

<4>[    0.000000]  2DIV = 00000003

<4>[    0.000000] Console: colour dummy device 80x30

<6>[    0.000000] console [tty0] enabled

<6>[    0.000000] ram_console_early_init: already initialized, bailing out

<6>[    0.000000] Calibrating delay loop... 663.55 BogoMIPS (lpj=3317760)

<4>[    0.239105] Mount-cache hash table entries: 512

<6>[    0.239837] Initializing cgroup subsys debug

<6>[    0.239868] Initializing cgroup subsys cpuacct

<6>[    0.239868] Initializing cgroup subsys freezer

<6>[    0.239959] CPU: Testing write buffer coherency: ok

<6>[    0.242645] regulator: core version 0.5

<6>[    0.242950] NET: Registered protocol family 16

<4>[    0.243988] htcleo_init()

<6>[    0.245025] Max ACPU freq from efuse data is 998400 KHz

<6>[    0.245391] Acquire 'boot-time' perf_lock

<6>[    0.245452] init_dex_comm: WinCE DEX initialized.

<6>[    0.245483] PLL0 @ f8005300: MODE=00000007 L=0000000c M=00000004 N=00000005 freq=245760000 Hz (245 MHz)

<6>[    0.245513] PLL1 @ f8005320: MODE=00000007 L=00000028 M=00000000 N=00000001 freq=768000000 Hz (768 MHz)

<6>[    0.245544] PLL4 @ f8005380: MODE=00000000 L=0000000f M=00000000 N=00000001 freq=288000000 Hz (288 MHz)

<6>[    0.245605] PLL5 @ f80053a0: MODE=00000000 L=00000032 M=00000000 N=00000001 freq=960000000 Hz (960 MHz)

<6>[    0.245635] PCB XC: 00000004

<6>[    0.245635] AMSS version: 15.42.50.09H

<6>[    0.245666] BD_ADDRESS=50:c3:00:00:00:00

<6>[    0.245697] register analog ops = c056c710

<6>[    0.245697] [HS_MGR] (headset_notifier_register) Register MIC_BIAS notifier

<6>[    0.348083] Init Panel

<4>[    0.348114] panel type is 1 :board id is 4 : AUO

<4>[    0.348846] htcleo_init_mmc()+

<4>[    0.349182] htcleo_init_mmc()-

<4>[    0.362335] bio: create slab <bio-0> at 0

<6>[    0.363616] mdp_probe: initialized

<6>[    0.364318] msm_i2c_probe

<6>[    0.364440] msm_i2c_probe: clk_ctl 315, 400000 Hz

<6>[    0.365142] regulator: VDCDC1: 1000 <--> 1300 mV

<6>[    0.365386] regulator: VDCDC2: 1260 mV

<6>[    0.365570] regulator: VDCDC3: 800 <--> 3300 mV

<6>[    0.365783] regulator: LDO1: 1000 <--> 3150 mV

<6>[    0.365997] regulator: LDO2: 3300 mV

<3>[    0.366485] msm_i2c msm_i2c.0: IRQ but nothing to do!, status 0

<6>[    0.368133] Bluetooth: Core ver 2.15

<6>[    0.368377] NET: Registered protocol family 31

<6>[    0.368377] Bluetooth: HCI device and connection manager initialized

<6>[    0.368408] Bluetooth: HCI socket layer initialized

<6>[    0.368835] Switching to clocksource gp_timer

<7>[    0.370513] spi clk = 0x0

<4>[    0.370544] spi: SPI_CONFIG=8f

<4>[    0.370544] spi: SPI_IO_CONTROL=401

<4>[    0.370574] spi: SPI_OPERATIONAL=85

<4>[    0.370574] spi: SPI_ERROR_FLAGS_EN=7f

<4>[    0.370605] spi: SPI_ERROR_FLAGS=0

<4>[    0.370605] -msm_spi_probe()

<6>[    0.371093] NET: Registered protocol family 2

<6>[    0.371307] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)

<6>[    0.371948] TCP established hash table entries: 8192 (order: 4, 65536 bytes)

<6>[    0.372131] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)

<6>[    0.372222] TCP: Hash tables configured (established 8192 bind 8192)

<6>[    0.372253] TCP reno registered

<6>[    0.372589] NET: Registered protocol family 1

<6>[    0.373962] Unpacking initramfs...

<6>[    0.618164] Freeing initrd memory: 1856K

<6>[    0.618988] smd_init()

<6>[    0.619018] smd_core_init()

<6>[    0.619110] smd_core_init() done

<3>[    0.619140] msm_init_last_radio_log: could not retrieve SMEM_CLKREGIM_BSP

<6>[    0.619323] smd_alloc_channel() cid=00 size=08192 'SMD_DS'

<6>[    0.619598] smd_alloc_channel() cid=01 size=32768 'SMD_DIAG'

<6>[    0.619750] smd_alloc_channel() cid=02 size=08192 'SMD_RPCCALL'

<6>[    0.619934] smd_alloc_channel() cid=05 size=08192 'SMD_CONTROL'

<6>[    0.620147] smd_alloc_channel() cid=07 size=32768 'SMD_DATA1'

<6>[    0.620300] smd_alloc_channel() cid=08 size=32768 'SMD_DATA2'

<6>[    0.620483] smd_alloc_channel() cid=09 size=32768 'SMD_DATA3'

<6>[    0.620666] smd_alloc_channel() cid=11 size=32768 'SMD_DATA5'

<6>[    0.620819] smd_alloc_channel() cid=12 size=32768 'SMD_DATA6'

<6>[    0.621002] smd_alloc_channel() cid=13 size=32768 'SMD_DATA7'

<6>[    0.621154] smd_alloc_channel() cid=15 size=08192 'SMD_DATA9'

<6>[    0.621368] smd_alloc_channel() cid=27 size=08192 'SMD_GPSNMEA'

<6>[    0.621551] smd_alloc_channel() cid=40 size=08192 'DSP_DIAG'

<3>[    0.621704] smd_alloc_v2: cid 41 does not exist

<3>[    0.621734] smd_alloc_v1: cid 41 does not exist

<6>[    0.621765] smd_alloc_channel() cid=42 size=08192 'DSP_DAL_AQ_VID'

<6>[    0.621948] smd_alloc_channel() cid=43 size=08192 'DSP_DAL_AQ_AUD'

<6>[    0.622131] smd_alloc_channel() cid=46 size=08192 'DSP_DAL00'

<3>[    0.622314] smd_alloc_v2: cid 47 does not exist

<3>[    0.622314] smd_alloc_v1: cid 47 does not exist

<6>[    0.622344] smd_alloc_channel() cid=48 size=08192 'SMD_DAL00'

<3>[    0.623291] _smem_log_init: no power log or log_idx allocated, smem_log disabled

<6>[    0.624511] RPC Probe

<6>[    0.624908] RPC Init done

<6>[    0.624938] SMD: ch 2 0 -> 1

<6>[    0.625762] SMD: ch 2 1 -> 2

<6>[    0.849609] Init amss parameters, found AMSS: 1550

<6>[    0.851287] Acquire 'boot-time' halt_lock

<6>[    0.851470] perflock_notifier_call: cpufreq lock speed 998400

<6>[    0.851501] active perf lock 'boot-time'

<6>[    0.851623] acpuclk_set_vdd_level got regulator

<6>[    0.852508] Registered led device: button-backlight

<3>[    1.679321] msm_i2c msm_i2c.0: error, status 43c8 (5C)

<3>[    1.679351] msm_i2c msm_i2c.0: Error during data xfer (-5) (5C)

<3>[    1.679412] msm_i2c msm_i2c.0: error, status 43c8 (34)

<3>[    1.679443] msm_i2c msm_i2c.0: Error during data xfer (-5) (34)

<6>[    1.680114] input: htcleo-touchscreen as /devices/virtual/input/input0

<6>[    1.680236] leo_touch_name 0-0000: Start touchscreen htcleo-touchscreen

<6>[    1.689758] -- RK OFF --

<4>[    1.699340] htcleo_wifi_init: start

<6>[    1.708526] htcleo-microp 0-0066: microp version [05][14]

<6>[    1.712493] htcleo-microp 0-0066: Init Done

<6>[    1.712768] capella_cm3602_probe: probe

<6>[    1.713073] input: proximity as /devices/virtual/input/input1

<6>[    1.713775] htcleo_leds_probe

<6>[    1.715179] Registered led device: green

<6>[    1.715301] Registered led device: amber

<6>[    1.715484] htcleo_backlight_probe: HTCLeo Backlight connect with microP: Probe

<6>[    1.715667] Registered led device: lcd-backlight

<6>[    1.717529] Registered led device: flashlight

<6>[    1.717559] flashlight_probe: The Flashlight Driver is ready

<6>[    1.717742] batt: init over voltage interrupt detection. at 1718876993 (1970-01-01 00:00:01.718876993 UTC)

<6>[    1.717834] htc_battery_core_probe

<6>[    1.718475] batt: htc_cable_status_update: 0 -> 0

<6>[    1.719024] [HS_MGR] (htc_35mm_probe) ++++++++++++++++++++

<6>[    1.720092] input: h2w headset as /devices/virtual/input/input2

<6>[    1.720428] [HS_MGR] (htc_35mm_probe) --------------------

<6>[    1.720611] [HS_GPIO] (audiojack_probe) ++++++++++++++++++++

<6>[    1.720703] DET IRQ Registered!

<6>[    1.720794] MIC IRQ Registered!

<6>[    1.720794] [HS_MGR] (headset_notifier_register) Register MIC_STATUS notifier

<6>[    1.720825] [HS_MGR] (headset_notifier_register) Register KEY_INT_ENABLE notifier

<6>[    1.720855] [HS_GPIO] (audiojack_probe) --------------------

<4>[    1.728668] highmem bounce pool size: 64 pages

<6>[    1.729095] ashmem: initialized

<6>[    1.730194] squashfs: version 4.0 (2009/01/31) Phillip Lougher

<6>[    1.734161] alg: No test for stdrng (krng)

<6>[    1.734283] io scheduler noop registered

<6>[    1.734375] io scheduler cfq registered (default)

<7>[    1.735137] clock-wince: pc_clk_set_rate: id=42 rate=24576000

<7>[    1.735168] clock-wince: set mdns: 42, 24576000; bitidx=0, offset=0, ns=0

<4>[    1.735198] set_mdns_host_clock: FIXME! Don't know how to set clock 42 - no known Md/Ns reg

<7>[    1.735198] clock-wince: pc_clk_set_rate: id=43 rate=24576000

<7>[    1.735229] clock-wince: set mdns: 43, 24576000; bitidx=0, offset=0, ns=0

<4>[    1.735260] set_mdns_host_clock: FIXME! Don't know how to set clock 43 - no known Md/Ns reg

<6>[    1.735931] msmfb_probe() installing 480 x 800 panel

<6>[    1.744476] msmfb: full update starting

<6>[    1.744537] mdp_lcdc_probe: initialized

<6>[    1.755096] BCM chip

<6>[    1.755371] msm_serial_hs_bcm.0: ttyHS0 at MMIO 0xa0200000 (irq = 44) is a MSM HS UART

<6>[    1.755859] msm_serial_hs module loaded

<6>[    1.759948] loop: module loaded

<6>[    1.760040] pmem: 1 init

<6>[    1.761169] pmem_adsp: 1 init

<6>[    1.791198] msmfb: full update completed

<6>[    1.792663] pmem_venc: 1 init

<6>[    1.793395] Android kernel panic handler initialized (bind=kpanic)

<6>[    1.793548] spi_bma150_probe: G-sensor connect with microP: start initial

<6>[    1.793823] msmfb: turning on panel

<6>[    1.793853] lcdc_unblank: ()

<6>[    1.793884] auo_panel_unblank

<6>[    1.829315] __spi_bma150_set_mode: BMA get into SLEEP mode!

<6>[    1.829833] msm_nand: allocated dma buffer at ffa01000, dma_addr 2124f000

<6>[    1.829956] status: e03020

<6>[    1.829986] nandid: 5510bcad maker ad device bc

<6>[    1.829986] Found a supported NAND device

<6>[    1.830017] NAND Id  : 0xBCAD

<6>[    1.830017] Buswidth : 16 Bits

<6>[    1.830047] Density  : 512 MByte

<6>[    1.830047] Pagesize : 2048 Bytes

<6>[    1.830078] Erasesize: 131072 Bytes

<6>[    1.830078] Oobsize  : 64 Bytes

<6>[    1.830139] msm_nand: read CFG0 = aa5400c0, CFG1 = 6744e

<6>[    1.830169] CFG0 Old: 0xaa5400c0

<6>[    1.830169] CFG1 Old: 0x0006744e

<6>[    1.830200] CFG0 Init  : 0xea5400c0

<6>[    1.830200] CFG1 Init  : 0x0006744e

<6>[    1.830230] CFG0: cw/page=3 ud_sz=512 ecc_sz=10 spare_sz=4 num_addr_cycles=5

<6>[    1.830291] DEV_CMD1: f00f3000

<6>[    1.830352] <6>NAND_EBI2_ECC_BUF_CFG: 1ff

<4>[    1.830383] #MTD# parts in atag = 0

<6>[    1.831481] PPP generic driver version 2.4.2

<6>[    1.831848] PPP Deflate Compression module registered

<6>[    1.831878] PPP BSD Compression module registered

<6>[    1.832916] PPP MPPE Compression module registered

<6>[    1.832946] NET: Registered protocol family 24

<6>[    1.834533] msm72k_udc: msm72k_probe

<6>[    1.834594] usb: accessory detect 0

<6>[    1.834625] usb: id_pin_gpio 0

<6>[    1.834655] msm72k_udc: msm72k_probe() io=d0860000, irq=58, dma=ffa02000(2126d000)

<6>[    1.835449] android init

<6>[    1.835540] android_probe pdata: c0568ec8

<6>[    1.835693] android_bind

<7>[    1.835693] android_bind_config

<6>[    1.835723] android_usb gadget: android_usb ready

<6>[    1.835754] msm72k_udc: msm72k_udc: registered gadget driver 'android_usb'

<6>[    1.835876] f_adb init

<6>[    1.835906] android_register_function adb

<6>[    1.835906] f_mass_storage init

<6>[    1.835937] android_register_function usb_mass_storage

<6>[    1.835968] f_rndis init

<6>[    1.835968] android_register_function ether

<6>[    1.835968] serial init

<6>[    1.835998] android_register_function serial

<6>[    1.835998] diag init

<6>[    1.836059] diag:msm_diag_probe(), pdev->id=0x1

<6>[    1.836090] SMD: ch 40 0 -> 1

<6>[    1.836181] SMD: ch 40 1 -> 2

<6>[    1.836242] android_register_function diag

<4>[    1.836303] android_usb gadget: using random self ethernet address

<4>[    1.836303] android_usb gadget: using random host ethernet address

<6>[    1.836853] usb0: MAC b2:5d:f1:6a:0e:06

<6>[    1.836883] usb0: HOST MAC 5e:46:5e:99:23:d6

<6>[    1.837066] mass_storage_bind_config

<6>[    1.837249] fsg_probe pdata: c0569f8c

<6>[    1.838409] hsusb: IDLE -> ONLINE

<6>[    1.838439] usb: lpm exit

<6>[    1.838470] hsusb: reset controller

<6>[    1.838531] android_usb gadget: Number of LUNs=1

<6>[    1.838592] adb_bind_config

<6>[    1.839721] diag_bind_config

<6>[    1.841461] serial_bind_config

<6>[    1.842559] usb: product_id=0xff9

<6>[    1.843444] GPIO Matrix Keypad Driver: Start keypad matrix for htcleo-keypad in interrupt mode

<6>[    1.843566] GPIO Input Driver: Start gpio inputs for htcleo-keypad in interrupt mode

<6>[    1.843872] input: htcleo-keypad as /devices/virtual/input/input3

<6>[    1.844635] using input dev h2w headset for key reset

<6>[    1.844665] using input dev htcleo-keypad for key reset

<6>[    1.845123] RTC: Init MSM RTC Clock

<6>[    1.845672] using rtc device, msm_rtc, for alarms

<6>[    1.845703] rs30000048:00010000 rs30000048:00010000: rtc core: registered msm_rtc as rtc0

<6>[    1.845825] AKM8973 compass driver: init

<6>[    1.846618] input: compass as /devices/virtual/input/input4

<6>[    1.847351] adp1650 Led Flash driver: init

<6>[    1.847442] Linux video capture interface: v2.00

<6>[    1.848083] sctrl.node 0

<6>[    1.848083] s5k3e2fx_sensor_probe

<6>[    1.869232] msm_hsusb_phy_reset

<6>[    2.079284] msm72k_udc: ulpi: write 0x0c to 0x31

<6>[    2.079315] msm72k_udc: ulpi: write 0x30 to 0x32

<6>[    2.079315] msm72k_udc: ulpi: write 0x1d to 0x0d

<6>[    2.079345] msm72k_udc: ulpi: write 0x1d to 0x10

<6>[    2.079406] usb: notify offline

<6>[    2.079406] msm_hsusb: enable pullup

<6>[    2.079437] hsusb: ONLINE -> OFFLINE

<6>[    2.079467] usb: notify offline

<6>[    2.079467] msm_hsusb_phy_reset

<6>[    2.139282] usb: lpm enter

<6>[    2.139282] usb_suspend_phy

<6>[    2.270599] s5k3e2fx:kobject creat and add

<6>[    2.270660] s5k3e2fx:sysfs_create_file

<6>[    2.270690] s5k3e2fx:sysfs_create_file

<6>[    2.271728] [ds2746_batt]ds2746_battery_init

<6>[    2.271820] [ds2746_batt] ds2746_battery_prob

<4>[    2.272125] [D:BATT]Use 600 Kohm thermal resistance

<6>[    2.272979] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com

<6>[    2.273071] Bluetooth: HCI UART driver ver 2.2

<6>[    2.273101] Bluetooth: HCI H4 protocol initialized

<6>[    2.273101] Bluetooth: HCILL protocol initialized

<6>[    2.273132] perflock_notifier_call: cpufreq lock speed 998400

<6>[    2.273162] active perf lock 'boot-time'

<6>[    2.274627] mmc0: Qualcomm MSM SDCC at 0x00000000a0300000 irq 24,0 dma 8

<6>[    2.274658] mmc0: Platform slot type: N/A

<6>[    2.274688] mmc0: 4 bit data mode enabled

<6>[    2.274688] mmc0: 8 bit data mode disabled

<6>[    2.274719] mmc0: MMC clock 144000 -> 50000000 Hz, PCLK 64000000 Hz

<6>[    2.274749] mmc0: Slot eject status = 1

<6>[    2.274749] mmc0: Power save feature enable = 1

<6>[    2.274780] mmc0: DM non-cached buffer at ffa04000, dma_addr 0x21260000

<6>[    2.274810] mmc0: DM cmd busaddr 0x21260000, cmdptr busaddr 0x21260300

<4>[    2.275573] @@@ SD power 0 @@@

<6>[    2.275787] mmc1: Qualcomm MSM SDCC at 0x00000000a0400000 irq 26,240 dma 8

<6>[    2.275817] mmc1: Platform slot type: SD

<6>[    2.275817] mmc1: 4 bit data mode enabled

<6>[    2.275848] mmc1: 8 bit data mode disabled

<6>[    2.275878] mmc1: MMC clock 144000 -> 50000000 Hz, PCLK 64000000 Hz

<6>[    2.275878] mmc1: Slot eject status = 0

<6>[    2.275909] mmc1: Power save feature enable = 1

<6>[    2.275939] mmc1: DM non-cached buffer at ffa05000, dma_addr 0x21261000

<6>[    2.275939] mmc1: DM cmd busaddr 0x21261000, cmdptr busaddr 0x21261300

<6>[    2.277343] logger: created 64K log 'log_main'

<6>[    2.277557] logger: created 256K log 'log_events'

<6>[    2.277709] logger: created 64K log 'log_radio'

<6>[    2.277862] logger: created 64K log 'log_system'

<4>[    2.278472] GACT probability NOT on

<4>[    2.278503] Mirror/redirect action on

<4>[    2.278533] u32 classifier

<4>[    2.278533]     Actions configured

<4>[    2.278564] Netfilter messages via NETLINK v0.30.

<4>[    2.278656] nf_conntrack version 0.5.0 (6569 buckets, 26276 max)

<4>[    2.278991] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use

<4>[    2.279022] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or

<4>[    2.279052] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.

<4>[    2.279235] ctnetlink v0.93: registering with nfnetlink.

<6>[    2.282531] xt_time: kernel timezone is -0000

<6>[    2.282897] ip_tables: (C) 2000-2006 Netfilter Core Team

<6>[    2.283050] arp_tables: (C) 2002 David S. Miller

<6>[    2.283172] TCP cubic registered

<6>[    2.283416] NET: Registered protocol family 10

<6>[    2.284362] lo: Disabled Privacy Extensions

<6>[    2.285369] Mobile IPv6

<6>[    2.285400] IPv6 over IPv4 tunneling driver

<6>[    2.286071] sit0: Disabled Privacy Extensions

<6>[    2.286804] ip6tnl0: Disabled Privacy Extensions

<6>[    2.286987] NET: Registered protocol family 17

<6>[    2.287017] NET: Registered protocol family 15

<6>[    2.287078] Bluetooth: L2CAP ver 2.14

<6>[    2.287078] Bluetooth: L2CAP socket layer initialized

<6>[    2.287109] Bluetooth: SCO (Voice Link) ver 0.6

<6>[    2.287139] Bluetooth: SCO socket layer initialized

<6>[    2.287445] Bluetooth: RFCOMM TTY layer initialized

<6>[    2.287506] Bluetooth: RFCOMM socket layer initialized

<6>[    2.287506] Bluetooth: RFCOMM ver 1.11

<6>[    2.287536] Bluetooth: BNEP (Ethernet Emulation) ver 1.3

<6>[    2.287567] Bluetooth: HIDP (Human Interface Emulation) ver 1.2

<6>[    2.287719] ThumbEE CPU extension supported.

<6>[    2.287750] wifi_nvs_init

<6>[    2.288238] No sleep statistics

<6>[    2.288269] [Port list] init()

<6>[    2.288269] [Port list] Virtual Address for port_list: [f81b6da0]

<6>[    2.288299] [Port list] Physical Address for port_list: [1B6DA0]

<6>[    2.289367] input: lightsensor-level as /devices/virtual/input/input5

<6>[    2.290100] clock_late_init() disabled 19 unused clocks

<6>[    2.290130] VFP support v0.3: implementor 51 architecture 0 part 0f variant 0 rev 1

<4>[    2.292114] [D:BATT] V=4072(685) I=-303(fffffd00) C=1170.0/1230(107e) id=4(a7) T=330(e5) KADC=1000

<4>[    2.292175] [D:BATT] state change(0->2), full count=0, over load count=0 [2293]

<6>[    2.292205] batt: ds2784_notify: 1 96 at 2293339894 (1970-01-01 00:00:02.293339894 UTC)

<6>[    2.292266] batt: batt:power_supply_changed: battery at 2293400929 (1970-01-01 00:00:02.293370412 UTC)

<4>[    2.292663] regulator_init_complete: incomplete constraints, leaving ldo2 on

<4>[    2.292877] regulator_init_complete: incomplete constraints, leaving ldo1 on

<4>[    2.293090] regulator_init_complete: incomplete constraints, leaving dcdc3 on

<4>[    2.293304] regulator_init_complete: incomplete constraints, leaving dcdc2 on

<4>[    2.293518] regulator_init_complete: incomplete constraints, leaving dcdc1 on

<6>[    2.294982] rs30000048:00010000 rs30000048:00010000: setting system clock to 2010-11-15 18:05:09 UTC (1289844309)

<6>[    2.296142] Freeing init memory: 404K

<4>[    2.312072] @@@ SD power 17 @@@

<4>[    2.378295] @@@ SD power 15 @@@

<4>[    2.877746] mmc1: host does not support reading read-only switch. assuming write-enable.

<6>[    2.877807] mmc1: new high speed SDHC card at address 57df

<6>[    2.878295] mmcblk0: mmc1:57df SD16G 14.9 GiB

<6>[    2.878631]  mmcblk0:

<6>[   12.487670] ADDRCONF(NETDEV_UP): usb0: link is not ready

<6>[   12.492248] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold

<6>[   12.492431] batt: charger ON (FAST) at 12493596267 (2010-11-15 18:05:19.697479273 UTC)

<6>[   15.794494] perflock_notifier_call: cpufreq lock speed 998400

<6>[   15.794525] active perf lock 'boot-time'

<6>[   15.794616] perflock_notifier_call: cpufreq lock speed 998400

<6>[   15.794647] active perf lock 'boot-time'

<6>[   15.794738] perflock_notifier_call: cpufreq lock speed 998400

<6>[   15.794738] active perf lock 'boot-time'

<6>[   15.970367] enabling adb

<6>[   15.970764] adb_open

<6>[   16.205352] warning: `rild' uses 32-bit capabilities (legacy support in use)

<6>[   16.329650] SMD: ch 0 0 -> 1

<6>[   16.329772] SMD: ch 5 0 -> 1

<4>[   16.329772] -qmi_open 0

<4>[   16.329833] -qmi_open 0

<4>[   16.329895] -qmi_open 0

<4>[   16.331665] +qmi_read 256

<6>[   16.332122] SMD: ch 5 1 -> 2

<6>[   16.332122] SMD: ch 0 1 -> 2

<6>[   17.302062] htc-acoustic: open

<6>[   17.303283] htc-acoustic: mmap

<6>[   17.303405] htc-acoustic: ioctl

<6>[   17.303436] htc-acoustic: ioctl: ACOUSTIC_UPDATE_ADIE called 168.

<6>[   17.303436] htc-acoustic: ioctl: done.

<6>[   17.303710] htc-acoustic: release

<6>[   17.306396] Audio: voice: stop

<6>[   17.308532] Audio: SWITCH DEVICE 17306899, acdb 607

<6>[   17.308563] q6audio_init

<6>[   17.308593] audio: init: first run, init dummy control

<6>[   17.308654] SMD: ch 43 0 -> 1

<6>[   17.409088] SMD: ch 43 1 -> 2

<6>[   17.410247] dal_attach: status = 0, name = 'DAL_AQ_AUD'

<6>[   17.410858] dal_attach: status = 0, name = 'DAL_AQ_AUD'

<6>[   17.997344] open done!

<6>[   17.997436] SMD: ch 48 0 -> 1

<6>[   18.099121] SMD: ch 48 1 -> 2

<6>[   18.099304] dal_attach: status = 0, name = 'DAL00'

<6>[   18.099609] dal_attach: status = 0, name = 'DAL00'

<6>[   18.099639] Audio: htcleo_analog_init

<6>[   18.110595] acdb: trying htcleo.acdb

<6>[   18.110626] misc msm_audio_ctl: firmware: requesting htcleo.acdb

<6>[   18.115997] acdb: 'htcleo.acdb' found, using translation

<4>[   18.116027] $$$ q6audio_init_rx_volumes

<6>[   18.116027] Audio: htcleo_get_rx_vol 0

<4>[   18.116363] $$ DEV=0107AC88: vol is 0

<6>[   18.116363] Audio: htcleo_get_rx_vol 0

<3>[   18.116638] init: untracked pid 191 exited

<4>[   18.117065] $$ DEV=01081511: vol is 0

<6>[   18.117065] Audio: htcleo_get_rx_vol 0

<4>[   18.117279] $$ DEV=0107AC8A: vol is 0

<6>[   18.117279] Audio: htcleo_get_rx_vol 500

<4>[   18.117858] audio_cb: s=1 e=0107605c status=20

<4>[   18.118133] $$ DEV=01081513: vol is 500

<6>[   18.118133] Audio: htcleo_get_rx_vol 500

<4>[   18.118408] $$ DEV=01081514: vol is 500

<6>[   18.118408] Audio: htcleo_get_rx_vol 500

<4>[   18.119171] audio_cb: s=1 e=0107605c status=20

<4>[   18.120147] $$ DEV=0108C508: vol is 500

<6>[   18.120178] Audio: htcleo_get_rx_vol 500

<4>[   18.120849] $$ DEV=0108C894: vol is 500

<6>[   18.120880] Audio: htcleo_get_rx_vol 500

<4>[   18.121337] audio_cb: s=1 e=0107605c status=20

<4>[   18.121582] $$ DEV=0108C895: vol is 500

<6>[   18.121582] Audio: htcleo_get_rx_vol 500

<4>[   18.121856] $$ DEV=0108C509: vol is 500

<6>[   18.121856] Audio: htcleo_get_rx_vol 0

<4>[   18.122406] audio_cb: s=1 e=0107605c status=20

<4>[   18.122680] $$ DEV=0108151C: vol is 0

<6>[   18.122680] Audio: htcleo_get_rx_vol 0

<4>[   18.122924] $$ DEV=0107AC8D: vol is 0

<6>[   18.122955] Audio: htcleo_get_rx_vol 0

<4>[   18.123474] audio_cb: s=1 e=0107605c status=20

<4>[   18.123718] $$ DEV=01081510: vol is 0

<6>[   18.123718] Audio: htcleo_get_rx_vol 500

<4>[   18.123992] $$ DEV=01081512: vol is 500

<6>[   18.123992] Audio: htcleo_get_rx_vol 0

<4>[   18.124542] audio_cb: s=1 e=0107605c status=20

<4>[   18.124786] $$ DEV=0108151B: vol is 0

<6>[   18.124786] Audio: htcleo_get_rx_vol 400

<4>[   18.125000] $$ DEV=01081519: vol is 400

<6>[   18.125000] Audio: htcleo_get_rx_vol 400

<4>[   18.125579] audio_cb: s=1 e=0107605c status=20

<4>[   18.125823] $$ DEV=0108151A: vol is 400

<6>[   18.125823] Audio: htcleo_get_rx_vol 400

<4>[   18.126037] $$ DEV=01081518: vol is 400

<6>[   18.126037] Audio: htcleo_get_rx_vol 500

<4>[   18.126953] audio_cb: s=1 e=0107605c status=20

<4>[   18.126983] $$ DEV=01089BF4: vol is 500

<6>[   18.127014] Audio: htcleo_get_rx_vol 500

<4>[   18.127624] audio_cb: s=1 e=0107605c status=20

<4>[   18.127838] $$ DEV=01089BF3: vol is 500

<4>[   18.127838] audio_update_acdb (17306899, 607)

<4>[   18.127868] table

<6>[   18.127868] acdb: 580 bytes for device 607, rate 48000.

<4>[   18.127899] res1 = 580

<4>[   18.127899] res2 = 580

<4>[   18.127899] call audio_set_table

<4>[   18.128540] audio_cb: s=1 e=0107605c status=20

<4>[   18.129425] audio_cb: s=1 e=0107605c status=20

<6>[   18.130187] Audio: SWITCH DEVICE 17306898, acdb 0

<4>[   18.130584] audio_cb: s=1 e=0107605c status=20

<6>[   18.130645] Audio: htcleo_get_rx_vol 500

<4>[   18.130645] $$ DEV=01081513: vol is 500

<4>[   18.132965] audio_cb: s=1 e=0107605c status=20

<4>[   18.133850] audio_cb: s=1 e=0107605c status=20

<4>[   18.134826] audio_cb: s=1 e=0107605c status=20

<4>[   18.141479] audio_cb: s=1 e=0107605c status=20

<4>[   18.142761] audio_cb: s=1 e=0107605c status=20

<4>[   18.143890] audio_cb: s=1 e=0107605c status=20

<4>[   18.145355] audio_cb: s=1 e=0107605c status=20

<4>[   18.149993] audio_cb: s=1 e=0107605c status=20

<6>[   23.139801] msm_kgsl: initilized dev=1 mmu=on

<6>[   23.139923] misc kgsl: firmware: requesting yamato_pm4.fw

<6>[   23.142242] misc kgsl: firmware: requesting yamato_pfp.fw

<3>[   23.143310] init: untracked pid 209 exited

<3>[   23.146667] init: untracked pid 210 exited

<6>[   44.472534] Audio: htcleo_get_rx_vol 200

<4>[   44.472534] $$ DEV=01081513: vol is 200

<4>[   44.474121] audio_cb: s=1 e=0107605c status=20

<6>[   44.735382] request_suspend_state: wakeup (3->0) at 44736485669 (2010-11-15 18:05:51.940399193 UTC)

<6>[   45.198974] __spi_bma150_set_mode: BMA get into NORMAL mode!

<4>[   52.803924] [D:BATT] V=4028(673) I=-427(fffffbc7) C=1165.0/1230(1072) id=4(a4) T=330(e5) KADC=1000

<4>[   52.803924] [D:BATT] voltage stable

<6>[   52.803955] batt: ds2784_notify: 1 95 at 52805089184 (2010-11-15 18:06:00.009002708 UTC)

<6>[   52.803985] batt: batt:power_supply_changed: battery at 52805119701 (2010-11-15 18:06:00.009033225 UTC)

<6>[   58.268188] htcwc_value = 0

<6>[   58.273162] msm_open_common: open control0

<6>[   58.273925] wait event : 1 timeout:3000

<6>[   58.399414] s5k3e2fx_ctrl->prev_res:0

<6>[   58.399444] s5k3e2fx_setting rupdate:0 g_usModuleVersion:1

<6>[   58.409332] >>>>>>>>(2010-11-15 18:06:05.614349383 UTC)<<<<<<<

<6>[   58.409332] msm_open_common: open config0

<6>[   58.410156] s5k3e2fx: otp_vendorid1[0]:0x   4

<6>[   58.410156] s5k3e2fx: otp_vendorid2[0]:0x  50

<6>[   58.410156] s5k3e2fx: otp_vendorid3[0]:0x   2

<6>[   58.410888] s5k3e2fx: otp_vendorid1[1]:0x   0

<6>[   58.410919] s5k3e2fx: otp_vendorid2[1]:0x   0

<6>[   58.410919] s5k3e2fx: otp_vendorid3[1]:0x   0

<6>[   58.411621] s5k3e2fx: otp_fuseid1[0]:0x   6

<6>[   58.411651] s5k3e2fx: otp_fuseid2[0]:0x  8f

<6>[   58.411651] s5k3e2fx: otp_fuseid3[0]:0x   7

<6>[   58.413238] s5k3e2fx: otp_fuseid1[1]:0x   0

<6>[   58.413238] s5k3e2fx: otp_fuseid2[1]:0x   0

<6>[   58.413238] s5k3e2fx: otp_fuseid3[1]:0x   0

<6>[   58.413269] s5k3e2fx: fuse->fuse_id_word1:0

<6>[   58.413269] s5k3e2fx: fuse->fuse_id_word2:0

<6>[   58.413269] s5k3e2fx: fuse->fuse_id_word3:0x00045002

<6>[   58.413299] s5k3e2fx: fuse->fuse_id_word4:0x00068f07

<6>[   58.417388] msm_enqueue: queue event new max is 1

<6>[   58.417724] msm_enqueue: queue control new max is 1

<6>[   58.635498] flashlight: mode is same: 0

<6>[   58.635528] flashlight hasn't been enable orhas already reset to 0 due to timeout

<6>[   58.638519] CFG_SET_MODE

<6>[   58.638519] s5k3e2fx_setting rupdate:1 g_usModuleVersion:1

<6>[   58.676696] >>>>>>>>(2010-11-15 18:06:05.881713889 UTC)<<<<<<<

<6>[   58.676696] msm_open_common: open frame0

<6>[   58.698699] CFG_SET_MODE

<6>[   58.698730] s5k3e2fx_setting rupdate:1 g_usModuleVersion:1

<6>[   58.798248] msm_enqueue: queue frame new max is 1

<6>[   58.798309] msm_enqueue: queue event new max is 2

<6>[   58.960296] msm_enqueue: queue event new max is 3

<6>[   60.238983] Release 'boot-time' perf_lock

<6>[   60.848968] Release 'boot-time' halt_lock

<6>[   61.239166] perflock_notifier_call: cpufreq recover policy 245000 998400

<6>[   62.009582] msm_enqueue: queue event new max is 4

<6>[   62.107666] msm_enqueue: queue event new max is 5

<6>[   62.205780] msm_enqueue: queue event new max is 6

<6>[   62.303833] msm_enqueue: queue event new max is 7

<6>[   62.401916] msm_enqueue: queue event new max is 8

<6>[   62.499969] msm_enqueue: queue event new max is 9

<6>[   62.584930] SMD: ch 7 0 -> 1

<6>[   62.598083] msm_enqueue: queue event new max is 10

<6>[   62.631439] SMD: ch 7 1 -> 2

<6>[   62.696166] msm_enqueue: queue event new max is 11

<6>[   62.794281] msm_enqueue: queue event new max is 12

<6>[   62.892364] msm_enqueue: queue event new max is 13

<6>[   62.990417] msm_enqueue: queue event new max is 14

<6>[   63.088500] msm_enqueue: queue event new max is 15

<6>[   63.186614] msm_enqueue: queue event new max is 16

<6>[   63.284667] msm_enqueue: queue event new max is 17

<6>[   63.382781] msm_enqueue: queue event new max is 18

<6>[   63.413818] msm_enqueue: queue event new max is 19

<6>[   63.413879] msm_enqueue: queue event new max is 20

<6>[   63.480834] msm_enqueue: queue event new max is 21

<3>[   63.519073] msm_i2c msm_i2c.0: Error waiting for notbusy

<3>[   63.519134] msm_i2c msm_i2c.0: Still busy after xfer completion (66)

<6>[   63.578918] msm_enqueue: queue event new max is 22

<6>[   63.677032] msm_enqueue: queue event new max is 23

<6>[   63.775115] msm_enqueue: queue event new max is 24

<6>[   63.873199] msm_enqueue: queue event new max is 25

<6>[   63.971282] msm_enqueue: queue event new max is 26

<6>[   64.069335] msm_enqueue: queue event new max is 27

<6>[   64.167480] msm_enqueue: queue event new max is 28

<6>[   64.265716] msm_enqueue: queue event new max is 29

<6>[   64.363586] msm_enqueue: queue event new max is 30

<6>[   64.461853] msm_enqueue: queue event new max is 31

<6>[   64.559753] msm_enqueue: queue event new max is 32

<6>[   64.658172] msm_enqueue: queue event new max is 33

<6>[   64.755920] msm_enqueue: queue event new max is 34

<6>[   64.854400] msm_enqueue: queue event new max is 35

<6>[   64.952117] msm_enqueue: queue event new max is 36

<6>[   65.050231] msm_enqueue: queue event new max is 37

<6>[   65.148284] msm_enqueue: queue event new max is 38

<6>[   65.246398] msm_enqueue: queue event new max is 39

<6>[   65.344451] msm_enqueue: queue event new max is 40

<6>[   65.442535] msm_enqueue: queue event new max is 41

<3>[   65.498992] msm_i2c msm_i2c.0: Error waiting for notbusy

<3>[   65.499053] msm_i2c msm_i2c.0: Still busy in starting xfer(10)

<4>[   65.499176] msm_i2c msm_i2c.0: i2c_scl: 1, i2c_sda: 0

<6>[   65.499328] msm_i2c msm_i2c.0: Bus busy cleared after 1 clock cycles, status 0, intf 300

<6>[   65.503509] msm_release_frame: frame0

<6>[   65.503570] __msm_release:sync->opencnt:3

<6>[   65.503601] release frame atomic_set pmsm->opened as 0

<6>[   65.528137] flashlight: mode is same: 0

<6>[   65.528167] flashlight hasn't been enable orhas already reset to 0 due to timeout

<6>[   65.528167] msm_release_config: config0

<6>[   65.528198] __msm_release:sync->opencnt:2

<6>[   65.528198] release config atomic_set pmsm->opened as 0

<6>[   65.528320] msm_release_control: control0

<6>[   65.528320] __msm_release:sync->opencnt:1

<6>[   65.528350] >>>>>>>>(2010-11-15 18:06:12.733367945 UTC)<<<<<<<

<6>[   65.840911] htcwc_value = 0

<6>[   65.843566] msm_open_common: open control0

<6>[   65.844238] wait event : 1 timeout:3000

<6>[   65.969360] s5k3e2fx_ctrl->prev_res:0

<6>[   65.969390] s5k3e2fx_setting rupdate:0 g_usModuleVersion:1

<6>[   65.976348] >>>>>>>>(2010-11-15 18:06:13.181365991 UTC)<<<<<<<

<6>[   65.976379] msm_open_common: open config0

<6>[   65.977325] s5k3e2fx: otp_vendorid1[0]:0x   4

<6>[   65.977355] s5k3e2fx: otp_vendorid2[0]:0x  50

<6>[   65.977355] s5k3e2fx: otp_vendorid3[0]:0x   2

<6>[   65.978393] s5k3e2fx: otp_vendorid1[1]:0x   0

<6>[   65.978424] s5k3e2fx: otp_vendorid2[1]:0x   0

<6>[   65.978424] s5k3e2fx: otp_vendorid3[1]:0x   0

<6>[   65.979675] s5k3e2fx: otp_fuseid1[0]:0x   6

<6>[   65.979675] s5k3e2fx: otp_fuseid2[0]:0x  8f

<6>[   65.979675] s5k3e2fx: otp_fuseid3[0]:0x   7

<6>[   65.980407] s5k3e2fx: otp_fuseid1[1]:0x   0

<6>[   65.980438] s5k3e2fx: otp_fuseid2[1]:0x   0

<6>[   65.980438] s5k3e2fx: otp_fuseid3[1]:0x   0

<6>[   65.980438] s5k3e2fx: fuse->fuse_id_word1:0

<6>[   65.980438] s5k3e2fx: fuse->fuse_id_word2:0

<6>[   65.980468] s5k3e2fx: fuse->fuse_id_word3:0x00045002

<6>[   65.980468] s5k3e2fx: fuse->fuse_id_word4:0x00068f07

<6>[   65.983856] msm_enqueue: queue control new max is 1

<6>[   66.009887] flashlight: mode is same: 0

<6>[   66.009918] flashlight hasn't been enable orhas already reset to 0 due to timeout

<6>[   66.062500] CFG_SET_MODE

<6>[   66.062530] s5k3e2fx_setting rupdate:1 g_usModuleVersion:1

<6>[   66.082214] >>>>>>>>(2010-11-15 18:06:13.287231471 UTC)<<<<<<<

<6>[   66.082214] msm_open_common: open frame0

<6>[   66.091949] CFG_SET_MODE

<6>[   66.091979] s5k3e2fx_setting rupdate:1 g_usModuleVersion:1

<6>[   71.325805] msm_release_frame: frame0

<6>[   71.325836] __msm_release:sync->opencnt:3

<6>[   71.325866] release frame atomic_set pmsm->opened as 0

<6>[   71.469879] flashlight: mode is same: 0

<6>[   71.469879] flashlight hasn't been enable orhas already reset to 0 due to timeout

<6>[   71.492431] CFG_SET_MODE

<6>[   71.492431] s5k3e2fx_setting rupdate:1 g_usModuleVersion:1

<6>[   71.511230] >>>>>>>>(2010-11-15 18:06:18.716247583 UTC)<<<<<<<

<6>[   71.511260] msm_open_common: open frame0

<6>[   71.520874] CFG_SET_MODE

<6>[   71.520904] s5k3e2fx_setting rupdate:1 g_usModuleVersion:1

<6>[   72.175018] SMD: ch 42 0 -> 1

<6>[   72.279052] SMD: ch 42 1 -> 2

<6>[   72.279235] dal_attach: status = 0, name = 'DAL_AQ_VID'

<6>[   72.279449] q6venc_open() handle=cdc59000 enc_cb=d0e4c0de

<6>[   72.305480] q6venc_close() handle=cdc59000

<3>[   77.299102] dal: call timed out. dsp is probably dead.

<4>[   77.299133] DAL cdc59000 -> a1020128 L=014 A=0 D=000f P=00 M=00 T=0

<4>[   77.299133] 000 00000001

<6>[   77.299163] dal call 15 0 ERROR

<3>[   77.299163] q6venc_release: dal_rpc STOP call failed

<6>[   81.860931] binder: release 476:476 transaction 6506 out, still active

<6>[   81.861785] binder: 200:200 transaction failed 29189, size 52-0

<6>[   81.861999] binder: 200:200 transaction failed 29189, size 52-0

<6>[   81.862060] binder: 200:200 transaction failed 29189, size 52-0

<3>[   82.298980] dal: call timed out. dsp is probably dead.

<4>[   82.299011] DAL cdc59000 -> a1020128 L=014 A=0 D=0000 P=00 M=02 T=0

<4>[   82.299041] 000 cdc59000

<6>[   82.300018] binder: 168:247 transaction failed 29189, size 4-0

<6>[   82.300048] binder: send failed reply for transaction 6506, target dead

<6>[   82.406860] msm_release_frame: frame0

<6>[   82.406890] __msm_release:sync->opencnt:3

<6>[   82.406890] release frame atomic_set pmsm->opened as 0

<6>[   82.408050] msm_release_config: config0

<6>[   82.408081] __msm_release:sync->opencnt:2

<6>[   82.408081] release config atomic_set pmsm->opened as 0

<6>[   82.408172] msm_release_control: control0

<6>[   82.408172] __msm_release:sync->opencnt:1

<6>[   82.408203] >>>>>>>>(2010-11-15 18:06:29.613250754 UTC)<<<<<<<

<6>[   83.967620] htcwc_value = 0

<6>[   83.972564] msm_open_common: open control0

<6>[   83.973388] wait event : 1 timeout:3000

<6>[   84.119506] s5k3e2fx_ctrl->prev_res:0

<6>[   84.119506] s5k3e2fx_setting rupdate:0 g_usModuleVersion:1

<6>[   84.129608] >>>>>>>>(2010-11-15 18:06:31.334625270 UTC)<<<<<<<

<6>[   84.129638] msm_open_common: open config0

<6>[   84.130432] s5k3e2fx: otp_vendorid1[0]:0x   4

<6>[   84.130462] s5k3e2fx: otp_vendorid2[0]:0x  50

<6>[   84.130462] s5k3e2fx: otp_vendorid3[0]:0x   2

<6>[   84.131195] s5k3e2fx: otp_vendorid1[1]:0x   0

<6>[   84.131195] s5k3e2fx: otp_vendorid2[1]:0x   0

<6>[   84.131225] s5k3e2fx: otp_vendorid3[1]:0x   0

<6>[   84.131958] s5k3e2fx: otp_fuseid1[0]:0x   6

<6>[   84.131958] s5k3e2fx: otp_fuseid2[0]:0x  8f

<6>[   84.131958] s5k3e2fx: otp_fuseid3[0]:0x   7

<6>[   84.132690] s5k3e2fx: otp_fuseid1[1]:0x   0

<6>[   84.132720] s5k3e2fx: otp_fuseid2[1]:0x   0

<6>[   84.132720] s5k3e2fx: otp_fuseid3[1]:0x   0

<6>[   84.132720] s5k3e2fx: fuse->fuse_id_word1:0

<6>[   84.132720] s5k3e2fx: fuse->fuse_id_word2:0

<6>[   84.132751] s5k3e2fx: fuse->fuse_id_word3:0x00045002

<6>[   84.132751] s5k3e2fx: fuse->fuse_id_word4:0x00068f07

<6>[   84.135681] msm_enqueue: queue control new max is 1

<6>[   84.182281] flashlight: mode is same: 0

<6>[   84.182281] flashlight hasn't been enable orhas already reset to 0 due to timeout

<6>[   84.185363] CFG_SET_MODE

<6>[   84.185394] s5k3e2fx_setting rupdate:1 g_usModuleVersion:1

<6>[   84.205017] >>>>>>>>(2010-11-15 18:06:31.410034205 UTC)<<<<<<<

<6>[   84.205047] msm_open_common: open frame0

<6>[   84.221008] CFG_SET_MODE

<6>[   84.221038] s5k3e2fx_setting rupdate:1 g_usModuleVersion:1

<6>[   85.819915] msm_release_frame: frame0

<6>[   85.819915] __msm_release:sync->opencnt:3

<6>[   85.819946] release frame atomic_set pmsm->opened as 0

<6>[   85.909240] flashlight: mode is same: 0

<6>[   85.909271] flashlight hasn't been enable orhas already reset to 0 due to timeout

<6>[   85.936828] CFG_SET_MODE

<6>[   85.936859] s5k3e2fx_setting rupdate:1 g_usModuleVersion:1

<6>[   85.965118] >>>>>>>>(2010-11-15 18:06:33.170135522 UTC)<<<<<<<

<6>[   85.965148] msm_open_common: open frame0

<6>[   85.979827] CFG_SET_MODE

<6>[   85.979827] s5k3e2fx_setting rupdate:1 g_usModuleVersion:1

<3>[   91.399017] dal: call timed out. dsp is probably dead.

<4>[   91.399078] DAL ce3b0400 -> 00000000 L=074 A=0 D=0000 P=00 M=01 T=0

<4>[   91.399108] 000 0200002d 00000000 00000000 00000000 00000000 00000000 00000000 00000000

<4>[   91.399169] 020 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000

<4>[   91.399200] 040 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000

<4>[   91.399261] 060 00000000

<3>[   91.399291] dal_attach: failure

<3>[   91.399322] q6venc_open: dal_attach failed

<6>[   94.211212] smd_close(cf873200)

<3>[   94.211761] init: untracked pid 550 exited

<4>[  102.810882] [D:BATT] V=4030(674) I=-378(fffffc42) C=1159.0/1230(1064) id=4(a4) T=320(e7) KADC=1000

<6>[  102.810913] batt: ds2784_notify: 1 95 at 102812047191 (2010-11-15 18:06:50.015930198 UTC)

<6>[  102.810913] batt: batt:power_supply_changed: battery at 102812077709 (2010-11-15 18:06:50.015960715 UTC)

<3>[  110.079040] msm_i2c msm_i2c.0: Error waiting for notbusy

<3>[  110.079071] msm_i2c msm_i2c.0: Still busy after xfer completion (66)

<3>[  112.059082] msm_i2c msm_i2c.0: Error waiting for notbusy

<3>[  112.059112] msm_i2c msm_i2c.0: Still busy in starting xfer(48)

<4>[  112.059204] msm_i2c msm_i2c.0: i2c_scl: 0, i2c_sda: 0

<6>[  112.059326] msm_i2c msm_i2c.0: Bus busy cleared after 1 clock cycles, status 0, intf 300

<6>[  115.730316] htcwc_value = 0

<6>[  118.336334] htcwc_value = 0

<6>[  122.016204] htcwc_value = 0

<6>[  124.561248] htcwc_value = 0

<6>[  127.147521] htcwc_value = 0

<3>[  131.169067] msm_i2c msm_i2c.0: Error waiting for notbusy

<3>[  131.169097] msm_i2c msm_i2c.0: Still busy after xfer completion (66)

<6>[  132.770568] msm_enqueue: queue event new max is 42

<6>[  132.857269] msm_enqueue: queue event new max is 43

<6>[  132.944091] msm_enqueue: queue event new max is 44

<6>[  133.030761] msm_enqueue: queue event new max is 45

<6>[  133.117370] msm_enqueue: queue event new max is 46

<3>[  133.149078] msm_i2c msm_i2c.0: Error waiting for notbusy

<3>[  133.149139] msm_i2c msm_i2c.0: Still busy in starting xfer(10)

<4>[  133.149230] msm_i2c msm_i2c.0: i2c_scl: 0, i2c_sda: 0

<6>[  133.149353] msm_i2c msm_i2c.0: Bus busy cleared after 1 clock cycles, status 0, intf 300

<6>[  133.473144] notify_cable_status(1)

<6>[  133.473205] msm_hsusb_set_vbus_state: 1

<6>[  133.473266] hsusb: OFFLINE -> ONLINE

<6>[  133.473266] usb: lpm exit

<6>[  133.482452] hsusb: reset controller

<6>[  133.519134] msm_hsusb_phy_reset

<6>[  133.729064] msm72k_udc: ulpi: write 0x0c to 0x31

<6>[  133.729064] msm72k_udc: ulpi: write 0x30 to 0x32

<6>[  133.729095] msm72k_udc: ulpi: write 0x1d to 0x0d

<6>[  133.729125] msm72k_udc: ulpi: write 0x1d to 0x10

<6>[  133.729187] usb: notify offline

<6>[  133.729187] msm_hsusb: enable pullup

<6>[  133.732299] msm72k_udc: usb: suspend

<6>[  133.749084] usb: not AC charger

<6>[  133.838592] msm72k_udc: usb: reset

<6>[  133.838623] usb: send connect type 1

<6>[  133.838653] fsg_set_ums_state: 1

<6>[  133.838653] ums: set state 1

<6>[  133.838928] batt:online=1

<6>[  133.838928] [ds2746_batt] cable change to 1

<6>[  133.838958] batt: ds2784_notify: 0 1 at 133840092844 (2010-11-15 18:07:21.044006368 UTC)

<6>[  133.838989] batt: charger ON (SLOW) at 133840123362 (2010-11-15 18:07:21.044036886 UTC)

<6>[  133.840667] msm72k_udc: usb: portchange USB_SPEED_HIGH

<6>[  134.000122] msm72k_udc: usb: reset

<6>[  134.002410] msm72k_udc: usb: portchange USB_SPEED_HIGH

<6>[  134.215576] android_usb gadget: high speed config #1: android

<6>[  134.216979] adb_function_set_alt: maxsize = 512

<6>[  134.217224] ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready

<6>[  134.217651] ums: set state 1

<7>[  145.099060] usb0: no IPv6 routers present

<4>[  152.821014] [D:BATT] V=4121(699) I=49(7e) C=1156.0/1230(105c) id=4(a9) T=320(ed) KADC=980

<4>[  152.821075] [D:BATT] acr update: P=943, C=4193.

<4>[  152.821350] [D:BATT]new RARC=943 C=1159mAh adc=4193.

<4>[  152.821380] [D:BATT] state change(2->3), full count=0, over load count=0 [1354271226]

<4>[  152.821411] [D:BATT] state change(3->5), full count=0, over load count=0 [1354271226]

<6>[  155.225524] htcwc_value = 0

<6>[  157.319793] htcwc_value = 0

<6>[  159.765594] htcwc_value = 0

<6>[  162.144317] htcwc_value = 0

<6>[  198.786010] htcwc_value = 0

<4>[  202.830902] [D:BATT] V=4130(69d) I=73(bb) C=1159.0/1230(1062) id=4(aa) T=320(ea) KADC=993

<4>[  202.830902] [D:BATT] acr update: P=943, C=4193.

<4>[  202.831146] [D:BATT]new RARC=943 C=1159mAh adc=4193.

<4>[  202.831146] [D:BATT] state change(5->3), full count=0, over load count=0 [1354321235]

<6>[  210.621765] htcwc_value = 0

<4>[  253.004882] [D:BATT] V=4135(69f) I=62(9f) C=1159.0/1230(1062) id=4(aa) T=320(e7) KADC=1000

<4>[  303.021026] [D:BATT] V=4138(6a0) I=65(a6) C=1159.0/1230(1064) id=4(aa) T=330(e5) KADC=1000

<6>[  303.021057] batt: ds2784_notify: 1 95 at 303022191238 (2010-11-15 18:10:10.226104762 UTC)

<6>[  303.021087] batt: batt:power_supply_changed: battery at 303022252273 (2010-11-15 18:10:10.226135280 UTC)

<6>[  343.256683] request_suspend_state: sleep (0->3) at 343257786939 (2010-11-15 18:10:50.461700463 UTC)

<6>[  343.256958] [R] early_suspend start

<6>[  343.278961] __spi_bma150_set_mode: BMA get into SLEEP mode!

<6>[  343.289001] lcdc_blank: ()

<4>[  343.289031] auo_panel_blank

<6>[  343.317749] msmfb: drawing while asleep

<6>[  343.419525] msmfb: drawing while asleep

<6>[  343.449768] __spi_bma150_set_mode: BMA get into SLEEP mode!

<6>[  343.530822] msmfb: drawing while asleep

<6>[  343.639862] msmfb: drawing while asleep

<6>[  343.740173] lcdc_suspend: suspending

<6>[  343.740264] [R] early_suspend: sync

<6>[  344.890472] active wake lock vbus_present

<6>[  344.890502] active wake lock msm_camera_wake

<6>[  344.890533] wake lock mmc_delayed_work, expired

<6>[  344.890563] wake lock SMD_DS, expired

<6>[  344.890625] [R] early_suspend end

<4>[  353.069183] [D:BATT] V=4169(6ad) I=207(20d) C=1160.0/1230(1067) id=4(ac) T=330(e4) KADC=1000

<4>[  403.082336] [D:BATT] V=4177(6b0) I=208(20f) C=1163.0/1230(106e) id=4(ac) T=330(e4) KADC=1000

<6>[  425.873687] request_suspend_state: wakeup (3->0) at 425874760789 (2010-11-15 18:12:13.078674313 UTC)

<6>[  425.877502] [R] late_resume start

<6>[  425.877593] lcdc_resume: resuming

<4>[  425.877624] auo_panel_init

<6>[  425.877716] msmfb: ready, waiting for full update

<6>[  425.890625] msmfb: full update starting

<6>[  425.911315] msmfb: full update completed

<6>[  425.911376] msmfb: turning on panel

<6>[  425.911376] lcdc_unblank: ()

<6>[  425.911376] auo_panel_unblank

<6>[  425.938934] __spi_bma150_set_mode: BMA get into NORMAL mode!

<6>[  426.479095] __spi_bma150_set_mode: BMA get into SLEEP mode!

<6>[  426.499145] __spi_bma150_set_mode: BMA get into NORMAL mode!

<3>[  426.769073] msm_i2c msm_i2c.0: error, status c8 (5C)

<3>[  426.769165] msm_i2c msm_i2c.0: Error during data xfer (-5) (5C)

<3>[  426.769287] msm_i2c msm_i2c.0: error, status c8 (34)

<3>[  426.769348] msm_i2c msm_i2c.0: Error during data xfer (-5) (34)

<6>[  426.769897] [R] late_resume end

<6>[  431.117523] request_suspend_state: sleep (0->3) at 431118626785 (2010-11-15 18:12:18.322540309 UTC)

<6>[  431.117767] [R] early_suspend start

<6>[  431.149047] __spi_bma150_set_mode: BMA get into SLEEP mode!

<6>[  431.156951] lcdc_blank: ()

<4>[  431.156982] auo_panel_blank

<6>[  431.169067] __spi_bma150_set_mode: BMA get into SLEEP mode!

<6>[  431.195983] msmfb: drawing while asleep

<6>[  431.299438] msmfb: drawing while asleep

<6>[  431.410156] msmfb: drawing while asleep

<6>[  431.410430] lcdc_suspend: suspending

<6>[  431.410491] [R] early_suspend: sync

<6>[  432.089965] active wake lock PowerManagerService

<6>[  432.089996] active wake lock kgsl

<6>[  432.090026] active wake lock vbus_present

<6>[  432.090026] active wake lock msm_camera_wake

<6>[  432.090057] wake lock mmc_delayed_work, expired

<6>[  432.090087] wake lock SMD_DS, expired

<6>[  432.090087] [R] early_suspend end

<6>[  432.640777] request_suspend_state: wakeup (3->0) at 432641850649 (2010-11-15 18:12:19.845764173 UTC)

<6>[  432.644531] [R] late_resume start

<6>[  432.644622] lcdc_resume: resuming

<4>[  432.644653] auo_panel_init

<6>[  432.644744] msmfb: ready, waiting for full update

<6>[  432.656585] msmfb: full update starting

<6>[  432.678344] msmfb: full update completed

<6>[  432.678466] msmfb: turning on panel

<6>[  432.678497] lcdc_unblank: ()

<6>[  432.678497] auo_panel_unblank

<6>[  432.709197] __spi_bma150_set_mode: BMA get into NORMAL mode!

<6>[  433.239105] __spi_bma150_set_mode: BMA get into SLEEP mode!

<6>[  433.259094] __spi_bma150_set_mode: BMA get into NORMAL mode!

<3>[  433.519042] msm_i2c msm_i2c.0: error, status c8 (5C)

<3>[  433.519134] msm_i2c msm_i2c.0: Error during data xfer (-5) (5C)

<3>[  433.519226] msm_i2c msm_i2c.0: error, status c8 (34)

<3>[  433.519317] msm_i2c msm_i2c.0: Error during data xfer (-5) (34)

<6>[  433.519836] [R] late_resume end

<4>[  453.085144] [D:BATT] V=4130(69d) I=10(1b) C=1165.0/1230(1072) id=4(aa) T=330(e4) KADC=993

<4>[  453.085144] [D:BATT] state change(3->5), full count=0, over load count=0 [1354571490]

<6>[  480.938201] msm72k_udc: usb: suspend

<6>[  480.974853] notify_cable_status(0)

<6>[  480.974884] msm_hsusb_set_vbus_state: 0

<6>[  480.974975] hsusb: ONLINE -> OFFLINE

<6>[  480.975128] usb: notify offline

<6>[  480.975982] msm_hsusb_phy_reset

<6>[  480.977142] adb_release

<6>[  480.979614] adb_open

<6>[  481.028930] usb: lpm enter

<6>[  481.028961] usb_suspend_phy

<6>[  481.029998] usb: send connect type 0

<6>[  481.029998] fsg_set_ums_state: 0

<6>[  481.029998] ums: set state 0

<6>[  481.030181] batt:online=0

<6>[  481.030181] [ds2746_batt] cable change to 0

<6>[  481.030212] batt: ds2784_notify: 0 0 at 481031346512 (2010-11-15 18:13:08.235229518 UTC)

<6>[  481.030212] batt: charger OFF at 481031346512 (2010-11-15 18:13:08.235260036 UTC)

<6>[  488.227294] notify_cable_status(1)

<6>[  488.227294] msm_hsusb_set_vbus_state: 1

<6>[  488.227325] hsusb: OFFLINE -> ONLINE

<6>[  488.227355] usb: lpm exit

<6>[  488.228363] hsusb: reset controller

<6>[  488.258972] msm_hsusb_phy_reset

<6>[  488.468963] msm72k_udc: ulpi: write 0x0c to 0x31

<6>[  488.468963] msm72k_udc: ulpi: write 0x30 to 0x32

<6>[  488.468963] msm72k_udc: ulpi: write 0x1d to 0x0d

<6>[  488.468994] msm72k_udc: ulpi: write 0x1d to 0x10

<6>[  488.469024] usb: notify offline

<6>[  488.469024] msm_hsusb: enable pullup

<6>[  488.472076] msm72k_udc: usb: suspend

<6>[  488.489013] usb: not AC charger

<6>[  488.578796] msm72k_udc: usb: reset

<6>[  488.579040] usb: send connect type 1

<6>[  488.579071] fsg_set_ums_state: 1

<6>[  488.579071] ums: set state 1

<6>[  488.579345] batt:online=1

<6>[  488.579376] [ds2746_batt] cable change to 1

<6>[  488.579376] batt: ds2784_notify: 0 1 at 488580510330 (2010-11-15 18:13:15.784423854 UTC)

<6>[  488.579406] batt: charger ON (SLOW) at 488580540848 (2010-11-15 18:13:15.784454372 UTC)

<6>[  488.581054] msm72k_udc: usb: portchange USB_SPEED_HIGH

<6>[  488.740692] msm72k_udc: usb: reset

<6>[  488.742980] msm72k_udc: usb: portchange USB_SPEED_HIGH

<6>[  488.955963] android_usb gadget: high speed config #1: android

<6>[  488.956756] adb_function_set_alt: maxsize = 512

<6>[  488.957031] ums: set state 1

<4>[  503.090850] [D:BATT] V=4138(6a0) I=48(7b) C=1164.0/1230(1070) id=4(aa) T=330(e2) KADC=1000