Advertisement
Guest User

Untitled

a guest
May 2nd, 2021
17
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 12.64 KB | None | 0 0
  1. [ 0.000000] Linux version 4.14.221 (builder@buildhost) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11306-c4a6851c72)) #0 Mon Feb 15 15:22:37 2021
  2. [ 0.000000] bootconsole [early0] enabled
  3. [ 0.000000] CPU0 revision is: 0001974c (MIPS 74Kc)
  4. [ 0.000000] MIPS: machine is TP-Link TL-WDR4300 v1
  5. [ 0.000000] SoC: Atheros AR9344 rev 2
  6. [ 0.000000] Determined physical RAM map:
  7. [ 0.000000] memory: 08000000 @ 00000000 (usable)
  8. [ 0.000000] Initrd not found or empty - disabling initrd
  9. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  10. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  11. [ 0.000000] Zone ranges:
  12. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
  13. [ 0.000000] Movable zone start for each node
  14. [ 0.000000] Early memory node ranges
  15. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
  16. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
  17. [ 0.000000] On node 0 totalpages: 32768
  18. [ 0.000000] free_area_init_node: node 0, pgdat 804fdf80, node_mem_map 81008b40
  19. [ 0.000000] Normal zone: 256 pages used for memmap
  20. [ 0.000000] Normal zone: 0 pages reserved
  21. [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
  22. [ 0.000000] random: get_random_bytes called from 0x80501740 with crng_init=0
  23. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  24. [ 0.000000] pcpu-alloc: [0] 0
  25. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
  26. [ 0.000000] Kernel command line: console=ttyS0,115200 rootfstype=squashfs,jffs2
  27. [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  28. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  29. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  30. [ 0.000000] Writing ErrCtl register=00000000
  31. [ 0.000000] Readback ErrCtl register=00000000
  32. [ 0.000000] Memory: 123300K/131072K available (4037K kernel code, 163K rwdata, 532K rodata, 1212K init, 212K bss, 7772K reserved, 0K cma-reserved)
  33. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  34. [ 0.000000] NR_IRQS: 51
  35. [ 0.000000] CPU clock: 560.000 MHz
  36. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6825930166 ns
  37. [ 0.000010] sched_clock: 32 bits at 280MHz, resolution 3ns, wraps every 7669584382ns
  38. [ 0.008323] Calibrating delay loop... 278.93 BogoMIPS (lpj=1394688)
  39. [ 0.084955] pid_max: default: 32768 minimum: 301
  40. [ 0.090064] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  41. [ 0.097127] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  42. [ 0.109128] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  43. [ 0.119634] futex hash table entries: 256 (order: -1, 3072 bytes)
  44. [ 0.126197] pinctrl core: initialized pinctrl subsystem
  45. [ 0.134041] NET: Registered protocol family 16
  46. [ 0.142306] PCI host bridge /ahb/pcie-controller@180c0000 ranges:
  47. [ 0.148809] MEM 0x0000000010000000..0x0000000013ffffff
  48. [ 0.154406] IO 0x0000000000000000..0x0000000000000000
  49. [ 0.176303] PCI host bridge to bus 0000:00
  50. [ 0.180676] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
  51. [ 0.188040] pci_bus 0000:00: root bus resource [io 0x0000]
  52. [ 0.193976] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
  53. [ 0.201216] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  54. [ 0.209681] pci 0000:00:00.0: [168c:0033] type 00 class 0x028000
  55. [ 0.209741] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x0001ffff 64bit]
  56. [ 0.209797] pci 0000:00:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
  57. [ 0.209878] pci 0000:00:00.0: supports D1
  58. [ 0.209890] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  59. [ 0.210113] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
  60. [ 0.210143] pci 0000:00:00.0: BAR 0: assigned [mem 0x10000000-0x1001ffff 64bit]
  61. [ 0.217979] pci 0000:00:00.0: BAR 6: assigned [mem 0x10020000-0x1002ffff pref]
  62. [ 0.228624] clocksource: Switched to clocksource MIPS
  63. [ 0.235026] NET: Registered protocol family 2
  64. [ 0.240593] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  65. [ 0.248024] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  66. [ 0.254841] TCP: Hash tables configured (established 1024 bind 1024)
  67. [ 0.261750] UDP hash table entries: 256 (order: 0, 4096 bytes)
  68. [ 0.267977] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  69. [ 0.274926] NET: Registered protocol family 1
  70. [ 0.279642] PCI: CLS 0 bytes, default 32
  71. [ 0.282498] Crashlog allocated RAM at address 0x3f00000
  72. [ 0.289400] workingset: timestamp_bits=30 max_order=15 bucket_order=0
  73. [ 0.301389] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  74. [ 0.307595] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  75. [ 0.327253] io scheduler noop registered
  76. [ 0.331473] io scheduler deadline registered (default)
  77. [ 0.337306] ar7200-usb-phy usb-phy: phy reset is missing
  78. [ 0.344960] pinctrl-single 1804002c.pinmux: 544 pins at pa b804002c size 68
  79. [ 0.353196] gpio-export gpio-export: 4 gpio(s) exported
  80. [ 0.359578] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  81. [ 0.368795] console [ttyS0] disabled
  82. [ 0.372641] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 2500000) is a 16550A
  83. [ 0.381856] console [ttyS0] enabled
  84. [ 0.389288] bootconsole [early0] disabled
  85. [ 0.416665] m25p80 spi0.0: s25fl064k (8192 Kbytes)
  86. [ 0.421621] 3 fixed-partitions partitions found on MTD device spi0.0
  87. [ 0.428069] Creating 3 MTD partitions on "spi0.0":
  88. [ 0.432961] 0x000000000000-0x000000020000 : "u-boot"
  89. [ 0.438873] 0x000000020000-0x0000007f0000 : "firmware"
  90. [ 0.445031] 2 tplink-fw partitions found on MTD device firmware
  91. [ 0.451096] Creating 2 MTD partitions on "firmware":
  92. [ 0.456142] 0x000000000000-0x0000001869d2 : "kernel"
  93. [ 0.461935] 0x0000001869d4-0x0000007d0000 : "rootfs"
  94. [ 0.467678] mtd: device 3 (rootfs) set to be root filesystem
  95. [ 0.473515] 1 squashfs-split partitions found on MTD device rootfs
  96. [ 0.479821] 0x0000003f0000-0x0000007d0000 : "rootfs_data"
  97. [ 0.486052] 0x0000007f0000-0x000000800000 : "art"
  98. [ 0.492791] libphy: Fixed MDIO Bus: probed
  99. [ 0.840423] libphy: ag71xx_mdio: probed
  100. [ 0.844447] mdio_bus mdio-bus.0: MDIO device at address 0 is missing.
  101. [ 0.851108] ag71xx 19000000.eth: Could not connect to PHY device. Deferring probe.
  102. [ 0.861417] NET: Registered protocol family 10
  103. [ 0.870591] Segment Routing with IPv6
  104. [ 0.874410] NET: Registered protocol family 17
  105. [ 0.879033] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  106. [ 0.892204] 8021q: 802.1Q VLAN Support v1.8
  107. [ 1.229726] ag71xx 19000000.eth: Could not connect to PHY device. Deferring probe.
  108. [ 1.237750] hctosys: unable to open rtc device (rtc0)
  109. [ 1.248343] VFS: Mounted root (squashfs filesystem) readonly on device 31:3.
  110. [ 1.260969] Freeing unused kernel memory: 1212K
  111. [ 1.265564] This architecture does not have kernel memory protection.
  112. [ 2.023122] init: Console is alive
  113. [ 2.026799] init: - watchdog -
  114. [ 2.478644] random: fast init done
  115. [ 2.911024] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  116. [ 3.004099] usbcore: registered new interface driver usbfs
  117. [ 3.009802] usbcore: registered new interface driver hub
  118. [ 3.015267] usbcore: registered new device driver usb
  119. [ 3.026281] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  120. [ 3.034656] ehci-platform: EHCI generic platform driver
  121. [ 3.040278] ehci-platform 1b000000.usb: EHCI Host Controller
  122. [ 3.046099] ehci-platform 1b000000.usb: new USB bus registered, assigned bus number 1
  123. [ 3.054182] ehci-platform 1b000000.usb: irq 3, io mem 0x1b000000
  124. [ 3.088666] ehci-platform 1b000000.usb: USB 2.0 started, EHCI 1.00
  125. [ 3.095813] hub 1-0:1.0: USB hub found
  126. [ 3.100037] hub 1-0:1.0: 1 port detected
  127. [ 3.105361] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  128. [ 3.115508] init: - preinit -
  129. [ 3.432441] ag71xx 19000000.eth: Could not connect to PHY device. Deferring probe.
  130. [ 3.764176] usb 1-1: new high-speed USB device number 2 using ehci-platform
  131. [ 3.781246] ag71xx 19000000.eth: Could not connect to PHY device. Deferring probe.
  132. [ 4.021583] random: procd: uninitialized urandom read (4 bytes read)
  133. [ 4.028801] hub 1-1:1.0: USB hub found
  134. [ 4.037316] hub 1-1:1.0: 4 ports detected
  135. [ 4.166504] random: jshn: uninitialized urandom read (4 bytes read)
  136. [ 4.389797] ag71xx 19000000.eth: Could not connect to PHY device. Deferring probe.
  137. [ 4.421023] random: jshn: uninitialized urandom read (4 bytes read)
  138. [ 8.738003] jffs2: notice: (475) jffs2_build_xattr_subsystem: complete building xattr subsystem, 19 of xdatum (2 unchecked, 17 orphan) and 118 of xref (32 dead, 69 orphan) found.
  139. [ 8.755700] mount_root: switching to jffs2 overlay
  140. [ 8.786485] overlayfs: upper fs does not support tmpfile.
  141. [ 8.798350] urandom-seed: Seeding with /etc/urandom.seed
  142. [ 8.925349] procd: - early -
  143. [ 8.928389] procd: - watchdog -
  144. [ 9.636794] procd: - watchdog -
  145. [ 9.640405] procd: - ubus -
  146. [ 9.721603] urandom_read: 5 callbacks suppressed
  147. [ 9.721612] random: ubusd: uninitialized urandom read (4 bytes read)
  148. [ 9.734539] random: ubusd: uninitialized urandom read (4 bytes read)
  149. [ 9.742521] procd: - init -
  150. [ 10.510576] kmodloader: loading kernel modules from /etc/modules.d/*
  151. [ 10.684530] ip6_tables: (C) 2000-2006 Netfilter Core Team
  152. [ 10.709133] Loading modules backported from Linux version v4.19.161-0-gdaefdc9eb24b
  153. [ 10.716906] Backport generated by backports.git v4.19.161-1-0-g4bb568fe
  154. [ 10.751005] ip_tables: (C) 2000-2006 Netfilter Core Team
  155. [ 10.775776] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
  156. [ 10.892052] xt_time: kernel timezone is -0000
  157. [ 11.013968] PPP generic driver version 2.4.2
  158. [ 11.029585] NET: Registered protocol family 24
  159. [ 11.060827] urngd: v1.0.2 started.
  160. [ 11.102509] ath: EEPROM regdomain: 0x0
  161. [ 11.102518] ath: EEPROM indicates default country code should be used
  162. [ 11.102522] ath: doing EEPROM country->regdmn map search
  163. [ 11.102538] ath: country maps to regdmn code: 0x3a
  164. [ 11.102544] ath: Country alpha2 being used: US
  165. [ 11.102548] ath: Regpair used: 0x3a
  166. [ 11.116384] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  167. [ 11.118193] ieee80211 phy0: Atheros AR9340 Rev:2 mem=0xb8100000, irq=12
  168. [ 11.125329] PCI: Enabling device 0000:00:00.0 (0000 -> 0002)
  169. [ 11.253933] ath: EEPROM regdomain: 0x0
  170. [ 11.253942] ath: EEPROM indicates default country code should be used
  171. [ 11.253946] ath: doing EEPROM country->regdmn map search
  172. [ 11.253962] ath: country maps to regdmn code: 0x3a
  173. [ 11.253969] ath: Country alpha2 being used: US
  174. [ 11.253973] ath: Regpair used: 0x3a
  175. [ 11.265808] ieee80211 phy1: Selected rate control algorithm 'minstrel_ht'
  176. [ 11.267686] ieee80211 phy1: Atheros AR9300 Rev:4 mem=0xb0000000, irq=14
  177. [ 11.309065] kmodloader: done loading kernel modules from /etc/modules.d/*
  178. [ 11.469773] ag71xx 19000000.eth: Could not connect to PHY device. Deferring probe.
  179. [ 11.542852] random: crng init done
  180. [ 11.849782] ag71xx 19000000.eth: Could not connect to PHY device. Deferring probe.
  181. [ 25.869961] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
  182. [ 28.236905] IPv6: ADDRCONF(NETDEV_UP): wlan-bridge: link is not ready
  183. [ 29.387579] IPv6: ADDRCONF(NETDEV_UP): wlan-zebes: link is not ready
  184. [ 29.482477] br-lan: port 1(wlan-zebes) entered blocking state
  185. [ 29.488322] br-lan: port 1(wlan-zebes) entered disabled state
  186. [ 29.494622] device wlan-zebes entered promiscuous mode
  187. [ 30.923788] IPv6: ADDRCONF(NETDEV_CHANGE): wlan-zebes: link becomes ready
  188. [ 30.930920] br-lan: port 1(wlan-zebes) entered blocking state
  189. [ 30.936780] br-lan: port 1(wlan-zebes) entered forwarding state
  190. [ 31.013175] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
  191. [ 33.627583] wlan-bridge: authenticate with xx:xx:xx:xx:xx:xx
  192. [ 33.644631] wlan-bridge: send auth to xx:xx:xx:xx:xx:xx (try 1/3)
  193. [ 33.652094] wlan-bridge: authenticated
  194. [ 33.658825] wlan-bridge: associate with xx:xx:xx:xx:xx:xx (try 1/3)
  195. [ 33.669248] wlan-bridge: RX AssocResp from xx:xx:xx:xx:xx:xx (capab=0x511 status=0 aid=11)
  196. [ 33.678022] wlan-bridge: associated
  197. [ 33.719879] wlan-bridge: Limiting TX power to 127 (127 - 0) dBm as advertised by xx:xx:xx:xx:xx:xx
  198. [ 33.798082] IPv6: ADDRCONF(NETDEV_CHANGE): wlan-bridge: link becomes ready
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement