solevi

Untitled

Mar 31st, 2012
76
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 7.09 KB | None | 0 0
  1. iw list
  2. Wiphy phy0
  3. Band 1:
  4. Capabilities: 0x820
  5. HT20
  6. Static SM Power Save
  7. RX HT20 SGI
  8. No RX STBC
  9. Max AMSDU length: 7935 bytes
  10. No DSSS/CCK HT40
  11. Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
  12. Minimum RX AMPDU time spacing: 4 usec (0x05)
  13. HT RX MCS rate indexes supported: 0-23
  14. TX unequal modulation not supported
  15. HT TX Max spatial streams: 2
  16. HT TX MCS rate indexes supported may differ
  17. Frequencies:
  18. * 2412 MHz [1] (14.0 dBm)
  19. * 2417 MHz [2] (14.0 dBm)
  20. * 2422 MHz [3] (14.0 dBm)
  21. * 2427 MHz [4] (14.0 dBm)
  22. * 2432 MHz [5] (14.0 dBm)
  23. * 2437 MHz [6] (14.0 dBm)
  24. * 2442 MHz [7] (14.0 dBm)
  25. * 2447 MHz [8] (14.0 dBm)
  26. * 2452 MHz [9] (14.0 dBm)
  27. * 2457 MHz [10] (14.0 dBm)
  28. * 2462 MHz [11] (14.0 dBm)
  29. Bitrates (non-HT):
  30. * 1.0 Mbps
  31. * 2.0 Mbps (short preamble supported)
  32. * 5.5 Mbps (short preamble supported)
  33. * 11.0 Mbps (short preamble supported)
  34. * 6.0 Mbps
  35. * 9.0 Mbps
  36. * 12.0 Mbps
  37. * 18.0 Mbps
  38. * 24.0 Mbps
  39. * 36.0 Mbps
  40. * 48.0 Mbps
  41. * 54.0 Mbps
  42. Band 2:
  43. Capabilities: 0x862
  44. HT20/HT40
  45. Static SM Power Save
  46. RX HT20 SGI
  47. RX HT40 SGI
  48. No RX STBC
  49. Max AMSDU length: 7935 bytes
  50. No DSSS/CCK HT40
  51. Maximum RX AMPDU length 65535 bytes (exponent: 0x003)
  52. Minimum RX AMPDU time spacing: 4 usec (0x05)
  53. HT RX MCS rate indexes supported: 0-23, 32
  54. TX unequal modulation not supported
  55. HT TX Max spatial streams: 2
  56. HT TX MCS rate indexes supported may differ
  57. Frequencies:
  58. * 5180 MHz [36] (15.0 dBm) (passive scanning, no IBSS)
  59. * 5200 MHz [40] (15.0 dBm) (passive scanning, no IBSS)
  60. * 5220 MHz [44] (15.0 dBm) (passive scanning, no IBSS)
  61. * 5240 MHz [48] (15.0 dBm) (passive scanning, no IBSS)
  62. * 5260 MHz [52] (15.0 dBm) (passive scanning, no IBSS, radar detection)
  63. * 5280 MHz [56] (15.0 dBm) (passive scanning, no IBSS, radar detection)
  64. * 5300 MHz [60] (15.0 dBm) (passive scanning, no IBSS, radar detection)
  65. * 5320 MHz [64] (15.0 dBm) (passive scanning, no IBSS, radar detection)
  66. * 5745 MHz [149] (16.0 dBm) (passive scanning, no IBSS)
  67. * 5765 MHz [153] (16.0 dBm) (passive scanning, no IBSS)
  68. * 5785 MHz [157] (16.0 dBm) (passive scanning, no IBSS)
  69. * 5805 MHz [161] (16.0 dBm) (passive scanning, no IBSS)
  70. * 5825 MHz [165] (16.0 dBm) (passive scanning, no IBSS)
  71. Bitrates (non-HT):
  72. * 6.0 Mbps
  73. * 9.0 Mbps
  74. * 12.0 Mbps
  75. * 18.0 Mbps
  76. * 24.0 Mbps
  77. * 36.0 Mbps
  78. * 48.0 Mbps
  79. * 54.0 Mbps
  80. max # scan SSIDs: 20
  81. max scan IEs length: 127 bytes
  82. Coverage class: 0 (up to 0m)
  83. Supported Ciphers:
  84. * WEP40 (00-0f-ac:1)
  85. * WEP104 (00-0f-ac:5)
  86. * TKIP (00-0f-ac:2)
  87. * CCMP (00-0f-ac:4)
  88. Available Antennas: TX 0 RX 0
  89. Supported interface modes:
  90. * IBSS
  91. * managed
  92. * monitor
  93. software interface modes (can always be added):
  94. * monitor
  95. interface combinations are not supported
  96. Supported commands:
  97. * new_interface
  98. * set_interface
  99. * new_key
  100. * new_beacon
  101. * new_station
  102. * new_mpath
  103. * set_mesh_params
  104. * set_bss
  105. * authenticate
  106. * associate
  107. * deauthenticate
  108. * disassociate
  109. * join_ibss
  110. * join_mesh
  111. * remain_on_channel
  112. * set_tx_bitrate_mask
  113. * action
  114. * frame_wait_cancel
  115. * set_wiphy_netns
  116. * set_channel
  117. * set_wds_peer
  118. * Unknown command (84)
  119. * Unknown command (87)
  120. * Unknown command (85)
  121. * connect
  122. * disconnect
  123. Supported TX frame types:
  124. * IBSS: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
  125. * managed: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
  126. * AP: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
  127. * AP/VLAN: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
  128. * mesh point: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
  129. * P2P-client: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
  130. * P2P-GO: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0
  131. Supported RX frame types:
  132. * IBSS: 0x00d0
  133. * managed: 0x0040 0x00d0
  134. * AP: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
  135. * AP/VLAN: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
  136. * mesh point: 0x00b0 0x00c0 0x00d0
  137. * P2P-client: 0x0040 0x00d0
  138. * P2P-GO: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0
  139. HT Capability overrides:
  140. * MCS: ff ff ff ff ff ff ff ff ff ff
  141. * maximum A-MSDU length
  142. * supported channel width
  143. * short GI for 40 MHz
  144. * max A-MPDU length exponent
  145. * min MPDU start spacing
  146. Device supports HT-IBSS.
Advertisement
Add Comment
Please, Sign In to add comment