Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 4.896105] Rebooting in 1 seconds..
- ===================================================================
- MT7621 stage1 code May 28 2018 14:51:28 (ASIC)
- CPU=50000000 HZ BUS=16666666 HZ
- ==================================================================
- Change MPLL source from XTAL to CR...
- do MEMPLL setting..
- MEMPLL Config : 0x11100000
- 3PLL mode + External loopback
- === XTAL-40Mhz === DDR-1200Mhz ===
- PLL4 FB_DL: 0x8, 1/0 = 531/493 21000000
- PLL2 FB_DL: 0xe, 1/0 = 697/327 39000000
- PLL3 FB_DL: 0x10, 1/0 = 580/444 41000000
- do DDR setting..[00320381]
- Apply DDR3 Setting...(use customer AC)
- 0 8 16 24 32 40 48 56 64 72 80 88 96 104 112 120
- --------------------------------------------------------------------------------
- 0000:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0001:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0002:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0003:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0004:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0005:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0006:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0007:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0008:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0009:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 000E:| 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
- 000F:| 0 0 0 0 1 1 1 1 1 1 1 1 1 1 0 0
- 0010:| 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0
- 0011:| 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0012:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0013:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0014:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0015:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0016:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0017:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0018:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 0019:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001A:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001B:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001C:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001D:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001E:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- 001F:| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
- DRAMC_DQSCTL1[0e0]=13000000
- DRAMC_DQSGCTL[124]=80000033
- rank 0 coarse = 15
- rank 0 fine = 72
- B:| 0 0 0 0 0 0 0 0 0 0 1 1 1 0 0 0
- opt_dle value:11
- DRAMC_DDR2CTL[07c]=C287223D
- DRAMC_PADCTL4[0e4]=000044B3
- DRAMC_DQIDLY1[210]=08080708
- DRAMC_DQIDLY2[214]=06040605
- DRAMC_DQIDLY3[218]=07070606
- DRAMC_DQIDLY4[21c]=07060707
- DRAMC_R0DELDLY[018]=00002021
- ==================================================================
- RX DQS perbit delay software calibration
- ==================================================================
- 1.0-15 bit dq delay value
- ==================================================================
- bit| 0 1 2 3 4 5 6 7 8 9
- --------------------------------------
- 0 | 5 3 6 6 3 5 4 5 3 4
- 10 | 6 6 6 7 5 6
- --------------------------------------
- ==================================================================
- 2.dqs window
- x=pass dqs delay value (min~max)center
- y=0-7bit DQ of every group
- input delay:DQS0 =33 DQS1 = 32
- ==================================================================
- bit DQS0 bit DQS1
- 0 (1~60)30 8 (1~58)29
- 1 (1~58)29 9 (1~60)30
- 2 (1~61)31 10 (1~62)31
- 3 (1~62)31 11 (2~60)31
- 4 (1~62)31 12 (1~62)31
- 5 (1~64)32 13 (1~64)32
- 6 (1~65)33 14 (1~62)31
- 7 (1~64)32 15 (1~62)31
- ==================================================================
- 3.dq delay value last
- ==================================================================
- bit| 0 1 2 3 4 5 6 7 8 9
- --------------------------------------
- 0 | 8 7 8 8 5 6 4 6 6 6
- 10 | 7 7 7 7 6 7
- ==================================================================
- ==================================================================
- TX perbyte calibration
- ==================================================================
- DQS loop = 15, cmp_err_1 = ffff2000
- dqs_perbyte_dly.last_dqsdly_pass[0]=15, finish count=1
- DQS loop = 14, cmp_err_1 = ffff0000
- dqs_perbyte_dly.last_dqsdly_pass[1]=14, finish count=2
- DQ loop=15, cmp_err_1 = ffff0000
- dqs_perbyte_dly.last_dqdly_pass[0]=15, finish count=1
- dqs_perbyte_dly.last_dqdly_pass[1]=15, finish count=2
- byte:0, (DQS,DQ)=(8,8)
- byte:1, (DQS,DQ)=(8,8)
- DRAMC_DQODLY1[200]=88888888
- DRAMC_DQODLY2[204]=88888888
- 20,data:88
- [EMI] DRAMC calibration passed
- ===================================================================
- MT7621 stage1 code done
- CPU=50000000 HZ BUS=16666666 HZ
- ===================================================================
- U-Boot 1.1.3 (Sep 21 2020 - 11:46:27)
- Board: Ralink APSoC DRAM: 128 MB
- Power on memory test. Memory size= 128 MB...OK!
- relocate_code Pointer at: 87fa4000
- Config XHCI 40M PLL
- ******************************
- Software System Reset Occurred
- ******************************
- Allocate 16 byte aligned buffer: 87fe0190
- Enable NFI Clock
- # MTK NAND # : Use HW ECC
- NAND ID [C8 D1 80 95 40]
- Device found in MTK table, ID: c8d1, EXT_ID: 809540
- Support this Device in MTK table! c8d1
- select_chip
- [NAND]select ecc bit:4, sparesize :64 spare_per_sector=16
- Signature matched and data read!
- load_fact_bbt success 1023
- load fact bbt success
- [mtk_nand] probe successfully!
- mtd->writesize=2048 mtd->oobsize=64, mtd->erasesize=131072 devinfo.iowidth=8
- ..============================================
- Ralink UBoot Version: 5.0.0.0
- --------------------------------------------
- ASIC MT7621A DualCore (MAC to MT7530 Mode)
- DRAM_CONF_FROM: Auto-Detection
- DRAM_TYPE: DDR3
- DRAM bus: 16 bit
- Xtal Mode=3 OCP Ratio=1/3
- Flash component: NAND Flash
- Date:Sep 21 2020 Time:11:46:27
- ============================================
- icache: sets:256, ways:4, linesz:32 ,total:32768
- dcache: sets:256, ways:4, linesz:32 ,total:32768
- ##### The CPU freq = 880 MHZ ####
- estimate memory size =128 Mbytes
- #Reset_MT7530
- set LAN/WAN WLLLL
- Please choose the operation:
- 1: Load system code to SDRAM via TFTP.
- 2: Load system code then write to Flash via TFTP.
- 3: Boot system code via Flash (default).
- 4: Entr boot command line interface.
- 7: Load Boot Loader code then write to Flash via Serial.
- 9: Load Boot Loader code then write to Flash via TFTP.
- 4 3 2 1 0
- Booting System 2
- ..ranand_erase: start:80000, len:20000
- ..Done!
- done
- 3: System Boot system code via Flash.
- ## Booting image at bc600000 ...
- Image Name: MIPS OpenWrt Linux-5.4.97
- Image Type: MIPS Linux Kernel Image (uncompressed)
- Data Size: 2506130 Bytes = 2.4 MB
- Load Address: 80001000
- Entry Point: 80001000
- ....................................... Verifying Checksum ... OK
- OK
- commandline uart_en=1 factory_mode=0
- No initrd
- ## Transferring control to Linux (at address 80001000) ...
- ## Giving linux memsize in MB, 128
- Starting kernel ...
- OpenWrt kernel loader for MIPS based SoC
- Copyright (C) 2011 Gabor Juhos <juhosg@openwrt.org>
- Decompressing kernel... done!
- Starting kernel at 80001000...
- [ 0.000000] Linux version 5.4.97 (builder@buildhost) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r15756-da283a8f2c)) #0 SMP Sun Feb 14 14:15:32 2021
- [ 0.000000] SoC Type: MediaTek MT7621 ver:1 eco:3
- [ 0.000000] printk: bootconsole [early0] enabled
- [ 0.000000] CPU0 revision is: 0001992f (MIPS 1004Kc)
- [ 0.000000] MIPS: machine is Xiaomi Mi Router AC2100
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] VPE topology {2,2} total 4
- [ 0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 0.000000] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
- [ 0.000000] HighMem empty
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
- [ 0.000000] percpu: Embedded 14 pages/cpu s26768 r8192 d22384 u57344
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32480
- [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
- [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
- [ 0.000000] Writing ErrCtl register=000020d0
- [ 0.000000] Readback ErrCtl register=000020d0
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 120456K/131072K available (6060K kernel code, 204K rwdata, 1288K rodata, 1268K init, 238K bss, 10616K reserved, 0K cma-reserved, 0K highmem)
- [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] rcu: Hierarchical RCU implementation.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
- [ 0.000000] NR_IRQS: 256
- [ 0.000000] random: get_random_bytes called from start_kernel+0x340/0x558 with crng_init=0
- [ 0.000000] CPU Clock: 880MHz
- [ 0.000000] clocksource: GIC: mask: 0xffffffffffffffff max_cycles: 0xcaf478abb4, max_idle_ns: 440795247997 ns
- [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 4343773742 ns
- [ 0.000009] sched_clock: 32 bits at 440MHz, resolution 2ns, wraps every 4880645118ns
- [ 0.007802] Calibrating delay loop... 583.68 BogoMIPS (lpj=1167360)
- [ 0.042002] pid_max: default: 32768 minimum: 301
- [ 0.046773] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.053998] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.064414] rcu: Hierarchical SRCU implementation.
- [ 0.069852] smp: Bringing up secondary CPUs ...
- [ 7.333217] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
- [ 7.333228] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 7.333240] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 7.333342] CPU1 revision is: 0001992f (MIPS 1004Kc)
- [ 0.102619] Synchronize counters for CPU 1: done.
- [ 7.394528] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
- [ 7.394538] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 7.394545] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 7.394603] CPU2 revision is: 0001992f (MIPS 1004Kc)
- [ 0.167316] Synchronize counters for CPU 2: done.
- [ 7.455905] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
- [ 7.455913] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 7.455921] MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
- [ 7.455980] CPU3 revision is: 0001992f (MIPS 1004Kc)
- [ 0.225179] Synchronize counters for CPU 3: done.
- [ 0.255052] smp: Brought up 1 node, 4 CPUs
- [ 0.263493] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.273174] futex hash table entries: 1024 (order: 3, 32768 bytes, linear)
- [ 0.280198] pinctrl core: initialized pinctrl subsystem
- [ 0.287050] NET: Registered protocol family 16
- [ 0.319923] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
- [ 0.331205] clocksource: Switched to clocksource GIC
- [ 0.338018] NET: Registered protocol family 2
- [ 0.343423] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
- [ 0.351731] TCP established hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.359311] TCP bind hash table entries: 1024 (order: 1, 8192 bytes, linear)
- [ 0.366301] TCP: Hash tables configured (established 1024 bind 1024)
- [ 0.372741] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
- [ 0.379229] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
- [ 0.386418] NET: Registered protocol family 1
- [ 0.390732] PCI: CLS 0 bytes, default 32
- [ 0.483138] 4 CPUs re-calibrate udelay(lpj = 1167360)
- [ 0.489620] workingset: timestamp_bits=14 max_order=15 bucket_order=1
- [ 0.502501] random: fast init done
- [ 0.510434] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.516231] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 0.527789] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
- [ 0.537062] mt7621_gpio 1e000600.gpio: registering 32 gpios
- [ 0.542950] mt7621_gpio 1e000600.gpio: registering 32 gpios
- [ 0.548825] mt7621_gpio 1e000600.gpio: registering 32 gpios
- [ 0.555303] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
- [ 0.565214] printk: console [ttyS0] disabled
- [ 0.569513] 1e000c00.uartlite: ttyS0 at MMIO 0x1e000c00 (irq = 19, base_baud = 3125000) is a 16550A
- [ 0.578496] printk: console [ttyS0] enabled
- [ 0.578496] printk: console [ttyS0] enabled
- [ 0.586754] printk: bootconsole [early0] disabled
- [ 0.586754] printk: bootconsole [early0] disabled
- [ 0.598519] mt7621-nand 1e003000.nand: Using programmed access timing: 31c07388
- [ 0.606103] nand: device found, Manufacturer ID: 0xc8, Chip ID: 0xd1
- [ 0.612451] nand: ESMT PSU1GA30DT
- [ 0.615773] nand: 128 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
- [ 0.623331] mt7621-nand 1e003000.nand: ECC strength adjusted to 4 bits
- [ 0.629875] mt7621-nand 1e003000.nand: Using programmed access timing: 21005134
- [ 0.637174] mt7621-nand 1e003000.nand: Using programmed access timing: 21005134
- [ 0.644470] Scanning device for bad blocks
- [ 2.626587] 10 fixed-partitions partitions found on MTD device mt7621-nand
- [ 2.633451] Creating 10 MTD partitions on "mt7621-nand":
- [ 2.638763] 0x000000000000-0x000000080000 : "Bootloader"
- [ 2.645566] 0x000000080000-0x0000000c0000 : "Config"
- [ 2.652025] 0x0000000c0000-0x000000100000 : "Bdata"
- [ 2.658174] 0x000000100000-0x000000140000 : "factory"
- [ 2.664692] 0x000000140000-0x000000180000 : "crash"
- [ 2.670888] 0x000000180000-0x0000001c0000 : "crash_syslog"
- [ 2.677774] 0x0000001c0000-0x000000200000 : "reserved0"
- [ 2.684328] 0x000000200000-0x000000600000 : "kernel_stock"
- [ 2.691348] 0x000000600000-0x000000a00000 : "kernel"
- [ 2.697626] 0x000000a00000-0x000007f80000 : "ubi"
- [ 2.705819] libphy: Fixed MDIO Bus: probed
- [ 2.737594] libphy: mdio: probed
- [ 2.741088] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
- [ 2.751298] mtk_soc_eth 1e100000.ethernet eth0: mediatek frame engine at 0xbe100000, irq 21
- [ 2.761582] mt7621-pci 1e140000.pcie: Parsing DT failed
- [ 2.769322] NET: Registered protocol family 10
- [ 2.775312] Segment Routing with IPv6
- [ 2.779065] NET: Registered protocol family 17
- [ 2.783602] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
- [ 2.796786] 8021q: 802.1Q VLAN Support v1.8
- [ 2.802801] mt7530 mdio-bus:1f: MT7530 adapts as multi-chip module
- [ 2.818300] libphy: dsa slave smi: probed
- [ 2.822757] mt7530 mdio-bus:1f wan (uninitialized): PHY [dsa-0.0:00] driver [Generic PHY]
- [ 2.832608] mt7530 mdio-bus:1f lan1 (uninitialized): PHY [dsa-0.0:02] driver [Generic PHY]
- [ 2.842320] mt7530 mdio-bus:1f lan2 (uninitialized): PHY [dsa-0.0:03] driver [Generic PHY]
- [ 2.852104] mt7530 mdio-bus:1f lan3 (uninitialized): PHY [dsa-0.0:04] driver [Generic PHY]
- [ 2.861856] mt7530 mdio-bus:1f: configuring for fixed/rgmii link mode
- [ 2.873093] DSA: tree 0 setup
- [ 2.876411] rt2880-pinmux pinctrl: pcie is already enabled
- [ 2.881906] mt7621-pci 1e140000.pcie: Error applying setting, reverse things back
- [ 2.889534] mt7621-pci-phy 1e149000.pcie-phy: PHY for 0xbe149000 (dual port = 1)
- [ 2.897110] mt7621-pci-phy 1e14a000.pcie-phy: PHY for 0xbe14a000 (dual port = 0)
- [ 3.004691] mt7621-pci-phy 1e149000.pcie-phy: Xtal is 40MHz
- [ 3.010273] mt7621-pci-phy 1e14a000.pcie-phy: Xtal is 40MHz
- [ 3.115961] mt7621-pci 1e140000.pcie: pcie2 no card, disable it (RST & CLK)
- [ 3.122912] mt7621-pci 1e140000.pcie: PCIE0 enabled
- [ 3.127787] mt7621-pci 1e140000.pcie: PCIE1 enabled
- [ 3.132672] mt7621-pci 1e140000.pcie: PCI coherence region base: 0x60000000, mask/settings: 0xf0000002
- [ 3.142140] mt7621-pci 1e140000.pcie: PCI host bridge to bus 0000:00
- [ 3.148510] pci_bus 0000:00: root bus resource [io 0x1e160000-0x1e16ffff]
- [ 3.155380] pci_bus 0000:00: root bus resource [mem 0x60000000-0x6fffffff]
- [ 3.162250] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 3.167772] pci 0000:00:00.0: [0e8d:0801] type 01 class 0x060400
- [ 3.173807] pci 0000:00:00.0: reg 0x10: [mem 0x00000000-0x7fffffff]
- [ 3.180073] pci 0000:00:00.0: reg 0x14: [mem 0x60400000-0x6040ffff]
- [ 3.186404] pci 0000:00:00.0: supports D1
- [ 3.190415] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
- [ 3.196560] pci 0000:00:01.0: [0e8d:0801] type 01 class 0x060400
- [ 3.202601] pci 0000:00:01.0: reg 0x10: [mem 0x00000000-0x7fffffff]
- [ 3.208868] pci 0000:00:01.0: reg 0x14: [mem 0x60410000-0x6041ffff]
- [ 3.215216] pci 0000:00:01.0: supports D1
- [ 3.219227] pci 0000:00:01.0: PME# supported from D0 D1 D3hot
- [ 3.226446] pci 0000:01:00.0: [14c3:7615] type 00 class 0x000280
- [ 3.232519] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x000fffff 64bit]
- [ 3.239468] pci 0000:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0000:00:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
- [ 3.254526] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
- [ 3.259771] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff]
- [ 3.265863] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
- [ 3.272645] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref]
- [ 3.279864] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
- [ 3.286711] pci 0000:02:00.0: [14c3:7603] type 00 class 0x028000
- [ 3.292766] pci 0000:02:00.0: reg 0x10: [mem 0x00000000-0x000fffff]
- [ 3.299195] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
- [ 3.306575] pci 0000:00:01.0: PCI bridge to [bus 02-ff]
- [ 3.311817] pci 0000:00:01.0: bridge window [io 0x0000-0x0fff]
- [ 3.317907] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff]
- [ 3.324690] pci 0000:00:01.0: bridge window [mem 0x60300000-0x603fffff pref]
- [ 3.331908] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 02
- [ 3.338564] pci 0000:00:00.0: BAR 0: no space for [mem size 0x80000000]
- [ 3.345171] pci 0000:00:00.0: BAR 0: failed to assign [mem size 0x80000000]
- [ 3.352136] pci 0000:00:01.0: BAR 0: no space for [mem size 0x80000000]
- [ 3.358744] pci 0000:00:01.0: BAR 0: failed to assign [mem size 0x80000000]
- [ 3.365701] pci 0000:00:00.0: BAR 8: assigned [mem 0x60000000-0x600fffff]
- [ 3.372487] pci 0000:00:00.0: BAR 9: assigned [mem 0x60100000-0x601fffff pref]
- [ 3.379706] pci 0000:00:01.0: BAR 8: assigned [mem 0x60200000-0x602fffff]
- [ 3.386491] pci 0000:00:01.0: BAR 9: assigned [mem 0x60300000-0x603fffff pref]
- [ 3.393707] pci 0000:00:00.0: BAR 1: assigned [mem 0x60400000-0x6040ffff]
- [ 3.400497] pci 0000:00:01.0: BAR 1: assigned [mem 0x60410000-0x6041ffff]
- [ 3.407285] pci 0000:00:00.0: BAR 7: assigned [io 0x1e160000-0x1e160fff]
- [ 3.414070] pci 0000:00:01.0: BAR 7: assigned [io 0x1e161000-0x1e161fff]
- [ 3.420861] pci 0000:01:00.0: BAR 0: assigned [mem 0x60000000-0x600fffff 64bit]
- [ 3.428174] pci 0000:00:00.0: PCI bridge to [bus 01]
- [ 3.433142] pci 0000:00:00.0: bridge window [io 0x1e160000-0x1e160fff]
- [ 3.439924] pci 0000:00:00.0: bridge window [mem 0x60000000-0x600fffff]
- [ 3.446707] pci 0000:00:00.0: bridge window [mem 0x60100000-0x601fffff pref]
- [ 3.453928] pci 0000:02:00.0: BAR 0: assigned [mem 0x60200000-0x602fffff]
- [ 3.460713] pci 0000:00:01.0: PCI bridge to [bus 02]
- [ 3.465680] pci 0000:00:01.0: bridge window [io 0x1e161000-0x1e161fff]
- [ 3.472462] pci 0000:00:01.0: bridge window [mem 0x60200000-0x602fffff]
- [ 3.479250] pci 0000:00:01.0: bridge window [mem 0x60300000-0x603fffff pref]
- [ 3.486989] mt7530 mdio-bus:1f: Link is Up - 1Gbps/Full - flow control off
- [ 3.494953] UBI: auto-attach mtd9
- [ 3.498311] ubi0: attaching mtd9
- [ 4.715913] ubi0: scanning is finished
- [ 4.736817] ubi0: attached mtd9 (name "ubi", size 117 MiB)
- [ 4.742336] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
- [ 4.749200] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
- [ 4.755975] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
- [ 4.762923] ubi0: good PEBs: 940, bad PEBs: 0, corrupted PEBs: 0
- [ 4.768921] ubi0: user volume: 0, internal volumes: 1, max. volumes count: 128
- [ 4.776130] ubi0: max/mean erase counter: 3/2, WL threshold: 4096, image sequence number: 674944404
- [ 4.785152] ubi0: available PEBs: 916, total reserved PEBs: 24, PEBs reserved for bad PEB handling: 20
- [ 4.794463] ubi0: background thread "ubi_bgt0d" started, PID 489
- [ 4.794488] hctosys: unable to open rtc device (rtc0)
- [ 4.806295] /dev/root: Can't open blockdev
- [ 4.810411] VFS: Cannot open root device "(null)" or unknown-block(0,0): error -6
- [ 4.817875] Please append a correct "root=" boot option; here are the available partitions:
- [ 4.826214] 1f00 512 mtdblock0
- [ 4.826219] (driver?)
- [ 4.832756] 1f01 256 mtdblock1
- [ 4.832759] (driver?)
- [ 4.839296] 1f02 256 mtdblock2
- [ 4.839299] (driver?)
- [ 4.845821] 1f03 256 mtdblock3
- [ 4.845824] (driver?)
- [ 4.852360] 1f04 256 mtdblock4
- [ 4.852363] (driver?)
- [ 4.858885] 1f05 256 mtdblock5
- [ 4.858888] (driver?)
- [ 4.865423] 1f06 256 mtdblock6
- [ 4.865426] (driver?)
- [ 4.871964] 1f07 4096 mtdblock7
- [ 4.871967] (driver?)
- [ 4.878488] 1f08 4096 mtdblock8
- [ 4.878492] (driver?)
- [ 4.885027] 1f09 120320 mtdblock9
- [ 4.885030] (driver?)
- [ 4.891586] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
- [ 4.899850] Rebooting in 1 seconds..
- https://github.com/CristianHae/Xiaomi-Mi-Router-AC2100
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement