API tools faq
paste
Guest User

a10s boot log

a guest
Oct 23rd, 2020
307
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 30.94 KB | None | 0 0
raw download clone embed print report
  1. U-Boot SPL 2013.10-rc2-08396-g27c7eed-dirty (Oct 04 2013 - 11:56:01)
  2. Board: A10s-OLinuXino-M
  3. DRAM: 512 MiB
  4. CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
  5. SPL: Please implement spl_start_uboot() for your board
  6. SPL: Direct Linux boot not active!
  7.  
  8.  
  9. U-Boot 2013.10-rc2-08396-g27c7eed-dirty (Oct 04 2013 - 11:56:01) Allwinner Technology
  10.  
  11. CPU: Allwinner A13/A10s (SUN5I)
  12. Board: A10s-OLinuXino-M
  13. I2C: ready
  14. DRAM: 512 MiB
  15. MMC: SUNXI SD/MMC: 0
  16. *** Warning - bad CRC, using default environment
  17.  
  18. In: serial
  19. Out: serial
  20. Err: serial
  21. Net: emac
  22. Hit any key to stop autoboot: 0
  23. reading uEnv.txt
  24. ** Unable to read file uEnv.txt **
  25. reading boot.scr
  26. ** Unable to read file boot.scr **
  27. reading script.bin
  28. 35776 bytes read in 6 ms (5.7 MiB/s)
  29. reading uImage
  30. 4198768 bytes read in 212 ms (18.9 MiB/s)
  31. ## Booting kernel from Legacy Image at 48000000 ...
  32. Image Name: Linux-3.4.104
  33. Created: 2020-10-23 12:41:34 UTC
  34. Image Type: ARM Linux Kernel Image (uncompressed)
  35. Data Size: 4198704 Bytes = 4 MiB
  36. Load Address: 40008000
  37. Entry Point: 40008000
  38. Verifying Checksum ... OK
  39. Loading Kernel Image ... OK
  40.  
  41. Starting kernel ...
  42.  
  43. <6>Booting Linux on physical CPU 0
  44. <6>Initializing cgroup subsys cpuset
  45. <5>Linux version 3.4.104 (root@A10s) (gcc version 4.6.3 (Debian 4.6.3-14) ) #5 PREEMPT Fri Oct 23 14:37:45 CEST 2020
  46. CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  47. CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  48. Machine: sun5i
  49. <6>Memory Reserved:
  50. <6> SYS : 0x43000000 - 0x4300ffff ( 64 kB)
  51. <6> VE : 0x44000000 - 0x48ffffff ( 80 MB)
  52. <6> LCD : 0x49000000 - 0x4affffff ( 32 MB)
  53. Memory policy: ECC disabled, Data cache writeback
  54. <6>sunxi: Allwinner A10s revision A (AW1625/sun5i) detected.
  55. <7>On node 0 totalpages: 131072
  56. <7>free_area_init_node: node 0, pgdat c07e2fb0, node_mem_map d0000000
  57. <7> DMA zone: 512 pages used for memmap
  58. <7> DMA zone: 0 pages reserved
  59. <7> DMA zone: 65024 pages, LIFO batch:15
  60. <7> Normal zone: 512 pages used for memmap
  61. <7> Normal zone: 65024 pages, LIFO batch:15
  62. <7>pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768<c>
  63. <7>pcpu-alloc: <c>[0] <c>0 <c>
  64. Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
  65. <5>Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait loglevel=8 panic=10
  66. <6>PID hash table entries: 2048 (order: 1, 8192 bytes)
  67. <6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  68. <6>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  69. <6>Memory: 512MB = 512MB total
  70. <5>Memory: 396156k/396156k available, 128132k reserved, 0K highmem
  71. <5>Virtual kernel memory layout:
  72. vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  73. fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  74. vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
  75. lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  76. pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  77. modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  78. .text : 0xc0008000 - 0xc0759708 (7494 kB)
  79. .init : 0xc075a000 - 0xc0783000 ( 164 kB)
  80. .data : 0xc0784000 - 0xc07e9660 ( 406 kB)
  81. .bss : 0xc07e9684 - 0xc08a0670 ( 732 kB)
  82. <6>SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  83. <6>NR_IRQS:128
  84. <6>sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  85. <6>Console: colour dummy device 80x30
  86. <6>Calibrating delay loop... <c>1001.88 BogoMIPS (lpj=5009408)
  87. <6>pid_max: default: 32768 minimum: 301
  88. <6>Mount-cache hash table entries: 512
  89. <6>Initializing cgroup subsys cpuacct
  90. <6>Initializing cgroup subsys devices
  91. <6>Initializing cgroup subsys freezer
  92. <6>Initializing cgroup subsys blkio
  93. <6>CPU: Testing write buffer coherency: ok
  94. <6>hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  95. <6>Setting up static identity map for 0x40513cf0 - 0x40513d24
  96. <6>devtmpfs: initialized
  97. <6>dummy:
  98. <6>NET: Registered protocol family 16
  99. <6>DMA: preallocated 256 KiB pool for atomic coherent allocations
  100. <6>hw-breakpoint: debug architecture 0x4 unsupported.
  101. <6>Init eGon pin module V2.0
  102. SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
  103. <6>Initialize DMAC OK
  104. <6>bio: create slab <bio-0> at 0
  105. <6>sunxi_gpio driver init ver 1.3
  106. <6>gpiochip_add: registered GPIOs 1 to 25 on device: A1X_GPIO
  107. <5>SCSI subsystem initialized
  108. <6>usbcore: registered new interface driver usbfs
  109. <6>usbcore: registered new interface driver hub
  110. <6>usbcore: registered new device driver usb
  111. <6>Advanced Linux Sound Architecture Driver Version 1.0.25.
  112. <6>Switching to clocksource aw_64bits_counter
  113. <5>FS-Cache: Loaded
  114. <6>cfg80211: Calling CRDA to update world regulatory domain
  115. <6>CacheFiles: Loaded
  116. [usb_manager]: CONFIG_USB_SW_SUNXI_USB0_OTG
  117. [sw_hcd0]: usb host driver initialize........
  118. [sw_hcd0]: open_usb_clock
  119. [sw_hcd0]: host_init_state = 0
  120. [sw_hcd0]: platform is usb host
  121. [sw_hcd0]: sw_hcd_host0: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx (X), HB-ISO Tx (X), SoftConn)
  122. [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 38
  123. <6>sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
  124. <6>sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
  125. <6>hub 1-0:1.0: USB hub found
  126. <6>hub 1-0:1.0: 1 port detected
  127. wrn: hcd is not enable, need not start hcd
  128. [sw_hcd0]: sw_usb_host0_disable start
  129. -------sw_hcd0_soft_disconnect---------
  130. is_on = 0, hcd0_set_vbus_cnt = 0
  131. [sw_hcd_host0]: Set USB Power Off
  132. wrn: hcd is not enable, need not stop hcd
  133. [sw_hcd0]: close_usb_clock
  134. [sw_hcd0]: sw_usb_host0_disable end
  135. [sw_udc]: udc_init: version 20080411
  136. <6>NET: Registered protocol family 2
  137. <6>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  138. <6>TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  139. <6>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  140. <6>TCP: Hash tables configured (established 16384 bind 16384)
  141. <6>TCP: reno registered
  142. <6>UDP hash table entries: 256 (order: 0, 4096 bytes)
  143. <6>UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  144. <6>NET: Registered protocol family 1
  145. <6>RPC: Registered named UNIX socket transport module.
  146. <6>RPC: Registered udp transport module.
  147. <6>RPC: Registered tcp transport module.
  148. <6>RPC: Registered tcp NFSv4.1 backchannel transport module.
  149. <6>audit: initializing netlink socket (disabled)
  150. <5>type=2000 audit(0.339:1): initialized
  151. <5>VFS: Disk quotas dquot_6.5.2
  152. Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  153. <5>NFS: Registering the id_resolver key type
  154. <6>NTFS driver 2.1.30 [Flags: R/W].
  155. <6>fuse init (API version 7.18)
  156. <6>msgmni has been set to 773
  157. <6>alg: No test for stdrng (krng)
  158. <6>Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  159. <6>io scheduler noop registered
  160. <6>io scheduler deadline registered
  161. <6>io scheduler cfq registered (default)
  162. <6>sunxi disp driver loaded (/dev/disp api 1.0)
  163. <6>Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  164. <6>[uart]: used uart info.: 0x0d
  165. <6>[uart]: serial probe 0 irq 1 mapbase 0x01c28000
  166. <6>sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
  167. [ 0.000000] Booting Linux on physical CPU 0
  168. [ 0.000000] Initializing cgroup subsys cpuset
  169. [ 0.000000] Linux version 3.4.104 (root@A10s) (gcc version 4.6.3 (Debian 4.6.3-14) ) #5 PREEMPT Fri Oct 23 14:37:45 CEST 2020
  170. [ 0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c5387d
  171. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  172. [ 0.000000] Machine: sun5i
  173. [ 0.000000] Memory Reserved:
  174. [ 0.000000] SYS : 0x43000000 - 0x4300ffff ( 64 kB)
  175. [ 0.000000] VE : 0x44000000 - 0x48ffffff ( 80 MB)
  176. [ 0.000000] LCD : 0x49000000 - 0x4affffff ( 32 MB)
  177. [ 0.000000] Memory policy: ECC disabled, Data cache writeback
  178. [ 0.000000] sunxi: Allwinner A10s revision A (AW1625/sun5i) detected.
  179. [ 0.000000] On node 0 totalpages: 131072
  180. [ 0.000000] free_area_init_node: node 0, pgdat c07e2fb0, node_mem_map d0000000
  181. [ 0.000000] DMA zone: 512 pages used for memmap
  182. [ 0.000000] DMA zone: 0 pages reserved
  183. [ 0.000000] DMA zone: 65024 pages, LIFO batch:15
  184. [ 0.000000] Normal zone: 512 pages used for memmap
  185. [ 0.000000] Normal zone: 65024 pages, LIFO batch:15
  186. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  187. [ 0.000000] pcpu-alloc: [0] 0
  188. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048
  189. [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait loglevel=8 panic=10
  190. [ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
  191. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  192. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  193. [ 0.000000] Memory: 512MB = 512MB total
  194. [ 0.000000] Memory: 396156k/396156k available, 128132k reserved, 0K highmem
  195. [ 0.000000] Virtual kernel memory layout:
  196. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  197. [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  198. [ 0.000000] vmalloc : 0xe0800000 - 0xff000000 ( 488 MB)
  199. [ 0.000000] lowmem : 0xc0000000 - 0xe0000000 ( 512 MB)
  200. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  201. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  202. [ 0.000000] .text : 0xc0008000 - 0xc0759708 (7494 kB)
  203. [ 0.000000] .init : 0xc075a000 - 0xc0783000 ( 164 kB)
  204. [ 0.000000] .data : 0xc0784000 - 0xc07e9660 ( 406 kB)
  205. [ 0.000000] .bss : 0xc07e9684 - 0xc08a0670 ( 732 kB)
  206. [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  207. [ 0.000000] NR_IRQS:128
  208. [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  209. [ 0.000000] Console: colour dummy device 80x30
  210. [ 0.006007] Calibrating delay loop... 1001.88 BogoMIPS (lpj=5009408)
  211. [ 0.050262] pid_max: default: 32768 minimum: 301
  212. [ 0.053856] Mount-cache hash table entries: 512
  213. [ 0.057754] Initializing cgroup subsys cpuacct
  214. [ 0.061160] Initializing cgroup subsys devices
  215. [ 0.064559] Initializing cgroup subsys freezer
  216. [ 0.067807] Initializing cgroup subsys blkio
  217. [ 0.071358] CPU: Testing write buffer coherency: ok
  218. [ 0.078934] hw perfevents: enabled with ARMv7 Cortex-A8 PMU driver, 5 counters available
  219. [ 0.084499] Setting up static identity map for 0x40513cf0 - 0x40513d24
  220. [ 0.087413] devtmpfs: initialized
  221. [ 0.089579] dummy:
  222. [ 0.093097] NET: Registered protocol family 16
  223. [ 0.099401] DMA: preallocated 256 KiB pool for atomic coherent allocations
  224. [ 0.104648] hw-breakpoint: debug architecture 0x4 unsupported.
  225. [ 0.108081] Init eGon pin module V2.0
  226. [ 0.113493] SOFTWINNER DMA Driver, (c) 2003-2004,2006 Simtec Electronics
  227. [ 0.115570] Initialize DMAC OK
  228. [ 0.123193] bio: create slab <bio-0> at 0
  229. [ 0.126592] sunxi_gpio driver init ver 1.3
  230. [ 0.132370] gpiochip_add: registered GPIOs 1 to 25 on device: A1X_GPIO
  231. [ 0.135414] SCSI subsystem initialized
  232. [ 0.140036] usbcore: registered new interface driver usbfs
  233. [ 0.144345] usbcore: registered new interface driver hub
  234. [ 0.148475] usbcore: registered new device driver usb
  235. [ 0.153995] Advanced Linux Sound Architecture Driver Version 1.0.25.
  236. [ 0.159178] Switching to clocksource aw_64bits_counter
  237. [ 0.161172] FS-Cache: Loaded
  238. [ 0.166613] cfg80211: Calling CRDA to update world regulatory domain
  239. [ 0.168730] CacheFiles: Loaded
  240. [ 0.174303] [usb_manager]: CONFIG_USB_SW_SUNXI_USB0_OTG
  241. [ 0.178154] [sw_hcd0]: usb host driver initialize........
  242. [ 0.182308] [sw_hcd0]: open_usb_clock
  243. [ 0.206491] [sw_hcd0]: host_init_state = 0
  244. [ 0.207461] [sw_hcd0]: platform is usb host
  245. [ 0.210370] [sw_hcd0]: sw_hcd_host0: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx (X), HB-ISO Tx (X), SoftConn)
  246. [ 0.221550] [sw_hcd0]: sw_hcd_init_controller: sw_hcd_host0: USB Host mode controller at f1c13000 using PIO, IRQ 38
  247. [ 0.234080] sw_hcd_host0 sw_hcd_host0: sw_hcd host driver
  248. [ 0.240789] sw_hcd_host0 sw_hcd_host0: new USB bus registered, assigned bus number 1
  249. [ 0.243917] hub 1-0:1.0: USB hub found
  250. [ 0.246834] hub 1-0:1.0: 1 port detected
  251. [ 0.250683] wrn: hcd is not enable, need not start hcd
  252. [ 0.251828] [sw_hcd0]: sw_usb_host0_disable start
  253. [ 0.257854] -------sw_hcd0_soft_disconnect---------
  254. [ 0.260821] is_on = 0, hcd0_set_vbus_cnt = 0
  255. [ 0.263870] [sw_hcd_host0]: Set USB Power Off
  256. [ 0.267614] wrn: hcd is not enable, need not stop hcd
  257. [ 0.268618] [sw_hcd0]: close_usb_clock
  258. [ 0.271100] [sw_hcd0]: sw_usb_host0_disable end
  259. [ 0.274270] [sw_udc]: udc_init: version 20080411
  260. [ 0.280305] NET: Registered protocol family 2
  261. [ 0.291796] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
  262. [ 0.298313] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  263. [ 0.304024] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
  264. [ 0.309634] TCP: Hash tables configured (established 16384 bind 16384)
  265. [ 0.311819] TCP: reno registered
  266. [ 0.316608] UDP hash table entries: 256 (order: 0, 4096 bytes)
  267. [ 0.321845] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  268. [ 0.325319] NET: Registered protocol family 1
  269. [ 0.330484] RPC: Registered named UNIX socket transport module.
  270. [ 0.334146] RPC: Registered udp transport module.
  271. [ 0.337840] RPC: Registered tcp transport module.
  272. [ 0.343231] RPC: Registered tcp NFSv4.1 backchannel transport module.
  273. [ 0.348310] audit: initializing netlink socket (disabled)
  274. [ 0.352021] type=2000 audit(0.339:1): initialized
  275. [ 0.361715] VFS: Disk quotas dquot_6.5.2
  276. [ 0.367075] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  277. [ 0.372706] NFS: Registering the id_resolver key type
  278. [ 0.377042] NTFS driver 2.1.30 [Flags: R/W].
  279. [ 0.380132] fuse init (API version 7.18)
  280. [ 0.383326] msgmni has been set to 773
  281. [ 0.390236] alg: No test for stdrng (krng)
  282. [ 0.396834] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  283. [ 0.399862] io scheduler noop registered
  284. [ 0.403087] io scheduler deadline registered
  285. [ 0.406771] io scheduler cfq registered (default)
  286. [ 0.411403] sunxi disp driver loaded (/dev/disp api 1.0)
  287. [ 0.416862] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  288. [ 0.420347] [uart]: used uart info.: 0x0d
  289. [ 0.424934] [uart]: serial probe 0 irq 1 mapbase 0x01c28000
  290. [ 0.450912] sunxi-uart.0: ttyS0 at MMIO 0x1c28000 (irq = 1) is a U6_16550A
  291. <6>console [ttyS0] enabled
  292. [ 1.110923] console [ttyS0] enabled
  293. <6>[uart]: serial probe 2 irq 3 mapbase 0x01c28800
  294. [ 1.119092] [uart]: serial probe 2 irq 3 mapbase 0x01c28800
  295. <6>sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 3) is a U6_16550A
  296. [ 1.150565] sunxi-uart.2: ttyS1 at MMIO 0x1c28800 (irq = 3) is a U6_16550A
  297. <6>[uart]: serial probe 3 irq 4 mapbase 0x01c28c00
  298. [ 1.162077] [uart]: serial probe 3 irq 4 mapbase 0x01c28c00
  299. <6>sunxi-uart.3: ttyS2 at MMIO 0x1c28c00 (irq = 4) is a U6_16550A
  300. [ 1.193519] sunxi-uart.3: ttyS2 at MMIO 0x1c28c00 (irq = 4) is a U6_16550A
  301. <6>brd: module loaded
  302. [ 1.203053] brd: module loaded
  303. <6>loop: module loaded
  304. [ 1.210019] loop: module loaded
  305. [NAND] nand driver version: 0x2 0x9
  306. [ 1.216497] [NAND] nand driver version: 0x2 0x9
  307. [SCAN_ERR] search nand physical architecture parameter failed!
  308. [ 1.226745] [SCAN_ERR] search nand physical architecture parameter failed!
  309. [NAND]init_blklayer fail
  310. [ 1.235974] [NAND]init_blklayer fail
  311. [spi]: sw spi init !!
  312. [ 1.241776] [spi]: sw spi init !!
  313. [spi]: sw spi init fetch spi0 uning configuration failed
  314. [ 1.250144] [spi]: sw spi init fetch spi0 uning configuration failed
  315. [spi]: Get spi devices number failed
  316. [ 1.259808] [spi]: Get spi devices number failed
  317. [spi]: register spi devices board info failed
  318. [ 1.268595] [spi]: register spi devices board info failed
  319. <4>spi: cannot find any using configuration for all 4 spi controllers, return directly!
  320. [ 1.283537] spi: cannot find any using configuration for all 4 spi controllers, return directly!
  321. <6>sunxi_emac Using mii phy on PortA
  322. [ 1.297404] sunxi_emac Using mii phy on PortA
  323. <6>sunxi_emac Using MAC from SID: 02:19:09:82:51:ec[ 1.316331] sunxi_emac Using MAC from SID: 02:19:09:82:51:ec[mmc_pm]: no sdio card used in configuration
  324. [mmc_pm]: no sdio card used in configuration
  325. [mmc_pm]: No sdio card, please check your config !!
  326. [ 1.336282] [mmc_pm]: No sdio card, please check your config !!
  327. [rtl8723as] rtw_drv_entry: mod_sel = 0 is incorrect.
  328. [ 1.346894] [rtl8723as] rtw_drv_entry: mod_sel = 0 is incorrect.
  329. <6>ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  330. [ 1.358385] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  331. <6>ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  332. [ 1.370078] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  333. [sw-ehci1]: open clock
  334. [ 1.378487] [sw-ehci1]: open clock
  335. [sw-ehci1]: Set USB Power ON
  336. [ 1.404449] [sw-ehci1]: Set USB Power ON
  337. <6>sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  338. [ 1.414806] sw-ehci sw-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
  339. <6>sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
  340. [ 1.428300] sw-ehci sw-ehci.1: new USB bus registered, assigned bus number 2
  341. <6>sw-ehci sw-ehci.1: irq 39, io mem 0x01c14000
  342. [ 1.439703] sw-ehci sw-ehci.1: irq 39, io mem 0x01c14000
  343. <6>sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
  344. [ 1.468103] sw-ehci sw-ehci.1: USB 2.0 started, EHCI 1.00
  345. <6>hub 2-0:1.0: USB hub found
  346. [ 1.476695] hub 2-0:1.0: USB hub found
  347. <6>hub 2-0:1.0: 1 port detected
  348. [ 1.483328] hub 2-0:1.0: 1 port detected
  349. [sw-ohci1]: open clock
  350. [ 1.489607] [sw-ohci1]: open clock
  351. <6>sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  352. [ 1.519033] sw-ohci sw-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
  353. <6>sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
  354. [ 1.532171] sw-ohci sw-ohci.1: new USB bus registered, assigned bus number 3
  355. <6>sw-ohci sw-ohci.1: irq 40, io mem 0x01c14400
  356. [ 1.543502] sw-ohci sw-ohci.1: irq 40, io mem 0x01c14400
  357. <6>hub 3-0:1.0: USB hub found
  358. [ 1.610775] hub 3-0:1.0: USB hub found
  359. <6>hub 3-0:1.0: 1 port detected
  360. [ 1.617425] hub 3-0:1.0: 1 port detected
  361. <6>Initializing USB Mass Storage driver...
  362. [ 1.625343] Initializing USB Mass Storage driver...
  363. <6>usbcore: registered new interface driver usb-storage
  364. [ 1.635304] usbcore: registered new interface driver usb-storage
  365. <6>USB Mass Storage support registered.
  366. [ 1.644884] USB Mass Storage support registered.
  367. <6>usbcore: registered new interface driver ums-alauda
  368. [ 1.654402] usbcore: registered new interface driver ums-alauda
  369. <6>usbcore: registered new interface driver ums-cypress
  370. [ 1.665302] usbcore: registered new interface driver ums-cypress
  371. <6>usbcore: registered new interface driver ums-datafab
  372. [ 1.676287] usbcore: registered new interface driver ums-datafab
  373. <6>usbcore: registered new interface driver ums_eneub6250
  374. [ 1.687443] usbcore: registered new interface driver ums_eneub6250
  375. <6>usbcore: registered new interface driver ums-freecom
  376. [ 1.698605] usbcore: registered new interface driver ums-freecom
  377. <6>usbcore: registered new interface driver ums-isd200
  378. [ 1.709504] usbcore: registered new interface driver ums-isd200
  379. <6>usbcore: registered new interface driver ums-jumpshot
  380. [ 1.720487] usbcore: registered new interface driver ums-jumpshot
  381. <6>usbcore: registered new interface driver ums-karma
  382. [ 1.731438] usbcore: registered new interface driver ums-karma
  383. <6>usbcore: registered new interface driver ums-onetouch
  384. [ 1.742339] usbcore: registered new interface driver ums-onetouch
  385. <6>usbcore: registered new interface driver ums-realtek
  386. [ 1.753421] usbcore: registered new interface driver ums-realtek
  387. <6>usbcore: registered new interface driver ums-sddr09
  388. [ 1.764323] usbcore: registered new interface driver ums-sddr09
  389. <6>usbcore: registered new interface driver ums-sddr55
  390. [ 1.775134] usbcore: registered new interface driver ums-sddr55
  391. <6>usbcore: registered new interface driver ums-usbat
  392. [ 1.785858] usbcore: registered new interface driver ums-usbat
  393. <6>mousedev: PS/2 mouse device common for all mice
  394. [ 1.796333] mousedev: PS/2 mouse device common for all mice
  395. rtp_used == 1.
  396. [ 1.803462] rtp_used == 1.
  397. sun4i-ts: tp_press_threshold_enable is 0.
  398. [ 1.810002] sun4i-ts: tp_press_threshold_enable is 0.
  399. sun4i-ts: rtp_sensitive_level is 15.
  400. [ 1.818360] sun4i-ts: rtp_sensitive_level is 15.
  401. sun4i-ts: rtp_exchange_x_y_flag is 0.
  402. [ 1.826362] sun4i-ts: rtp_exchange_x_y_flag is 0.
  403. <6>input: sun4i-ts as /devices/platform/sun4i-ts/input/input0
  404. [ 1.836767] input: sun4i-ts as /devices/platform/sun4i-ts/input/input0
  405. ========RTC Inital ===================
  406. [ 1.846968] ========RTC Inital ===================
  407. <3>rtc_fetch_sysconfig_para: rtc_unused.
  408. [ 1.855512] rtc_fetch_sysconfig_para: rtc_unused.
  409. rtc_fetch_sysconfig_para:ok
  410. [ 1.862828] rtc_fetch_sysconfig_para:ok
  411. pcf8563_init: after fetch_sysconfig_para: normal_i2c: 0x0. normal_i2c[1]: 0x0
  412. [ 1.873698] pcf8563_init: after fetch_sysconfig_para: normal_i2c: 0x0. normal_i2c[1]: 0x0
  413. <6>i2c /dev entries driver
  414. [ 1.884509] i2c /dev entries driver
  415. config i2c gpio with gpio_config api
  416. [ 1.891516] config i2c gpio with gpio_config api
  417. <4>i2c i2c-0: Invalid probe address 0x00
  418. [ 1.900022] i2c i2c-0: Invalid probe address 0x00
  419. <6>I2C: i2c-0: AW16XX I2C adapter
  420. [ 1.907784] I2C: i2c-0: AW16XX I2C adapter
  421. config i2c gpio with gpio_config api
  422. [ 1.915205] config i2c gpio with gpio_config api
  423. <4>i2c i2c-1: Invalid probe address 0x00
  424. [ 1.923625] i2c i2c-1: Invalid probe address 0x00
  425. <6>I2C: i2c-1: AW16XX I2C adapter
  426. [ 1.931378] I2C: i2c-1: AW16XX I2C adapter
  427. config i2c gpio with gpio_config api
  428. [ 1.938811] config i2c gpio with gpio_config api
  429. <4>i2c i2c-2: Invalid probe address 0x00
  430. [ 1.947212] i2c i2c-2: Invalid probe address 0x00
  431. <6>I2C: i2c-2: AW16XX I2C adapter
  432. [ 1.954969] I2C: i2c-2: AW16XX I2C adapter
  433. <6>lirc_dev: IR Remote Control driver registered, major 251
  434. [ 1.964551] lirc_dev: IR Remote Control driver registered, major 251
  435. <6>IR NEC protocol handler initialized
  436. [ 1.974472] IR NEC protocol handler initialized
  437. <6>IR RC5(x) protocol handler initialized
  438. [ 1.982741] IR RC5(x) protocol handler initialized
  439. <6>IR RC6 protocol handler initialized
  440. [ 1.991008] IR RC6 protocol handler initialized
  441. <6>IR JVC protocol handler initialized
  442. [ 1.999016] IR JVC protocol handler initialized
  443. <6>IR Sony protocol handler initialized
  444. [ 2.007104] IR Sony protocol handler initialized
  445. <6>IR RC5 (streamzap) protocol handler initialized
  446. [ 2.016242] IR RC5 (streamzap) protocol handler initialized
  447. <6>IR SANYO protocol handler initialized
  448. [ 2.025464] IR SANYO protocol handler initialized
  449. <6>IR MCE Keyboard/mouse protocol handler initialized
  450. [ 2.034944] IR MCE Keyboard/mouse protocol handler initialized
  451. <6>IR LIRC bridge handler initialized
  452. [ 2.044165] IR LIRC bridge handler initialized
  453. [pa_drv] start!!!
  454. [ 2.050264] [pa_drv] start!!!
  455. [pa_drv] init end!!!
  456. [ 2.055325] [pa_drv] init end!!!
  457. <6>input: axp152 as /devices/platform/sunxi-i2c.0/i2c-0/0-0030/input/input1
  458. [ 2.067763] input: axp152 as /devices/platform/sunxi-i2c.0/i2c-0/0-0030/input/input1
  459. <6>axp152_dcdc1: 3300 mV
  460. [ 2.078042] axp152_dcdc1: 3300 mV
  461. <6>axp152_dcdc2: 1000 <--> 1600 mV at 1400 mV
  462. [ 2.085698] axp152_dcdc2: 1000 <--> 1600 mV at 1400 mV
  463. <6>axp152_dcdc3: 1000 <--> 1600 mV at 1500 mV
  464. [ 2.095177] axp152_dcdc3: 1000 <--> 1600 mV at 1500 mV
  465. <4>axp152_dcdc3: Voltage range but no REGULATOR_CHANGE_VOLTAGE
  466. [ 2.105964] axp152_dcdc3: Voltage range but no REGULATOR_CHANGE_VOLTAGE
  467. <6>axp152_dcdc4: 1000 <--> 1600 mV at 1250 mV
  468. [ 2.116842] axp152_dcdc4: 1000 <--> 1600 mV at 1250 mV
  469. <4>axp152_dcdc4: Voltage range but no REGULATOR_CHANGE_VOLTAGE
  470. [ 2.127629] axp152_dcdc4: Voltage range but no REGULATOR_CHANGE_VOLTAGE
  471. <6>axp152_dldo2: 3000 mV
  472. [ 2.136662] axp152_dldo2: 3000 mV
  473. <6>[mmc-msg] sw_mci_init
  474. [ 2.142396] [mmc-msg] sw_mci_init
  475. <6>[mmc-msg] MMC host used card: 0x3, boot card: 0x1, io_card 2
  476. [ 2.151456] [mmc-msg] MMC host used card: 0x3, boot card: 0x1, io_card 2
  477. <6>[mmc-msg] sdc0 set round clock 400000, src 24000000
  478. [ 2.163250] [mmc-msg] sdc0 set round clock 400000, src 24000000
  479. <6>[mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  480. [ 2.177357] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  481. <6>[mmc-msg] sdc0 Probe: base:0xf1c0f000 irq:32 sg_cpu:e08e5000(4fc00000) ret 0.
  482. [ 2.194674] [mmc-msg] sdc0 Probe: base:0xf1c0f000 irq:32 sg_cpu:e08e5000(4fc00000) ret 0.
  483. <6>[mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  484. [ 2.210797] [mmc-msg] sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  485. <6>[mmc-msg] sdc1 set round clock 400000, src 24000000
  486. [ 2.224715] [mmc-msg] sdc1 set round clock 400000, src 24000000
  487. <6>[mmc-msg] sdc0 power on
  488. [ 2.233085] [mmc-msg] sdc0 power on
  489. [ccmu] set sdc0 reset status to 0 failed!
  490. [ 2.240332] [ccmu] set sdc0 reset status to 0 failed!
  491. <6>[mmc-msg] sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  492. [ 2.253529] [mmc-msg] sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  493. <3>[mmc-err] Failed to release sdc0 reset
  494. [ 2.266323] [mmc-err] Failed to release sdc0 reset
  495. <6>[mmc-msg] sdc1 Probe: base:0xf1c10000 irq:33 sg_cpu:e08e7000(4fc01000) ret 0.
  496. [ 2.280283] [mmc-msg] sdc1 Probe: base:0xf1c10000 irq:33 sg_cpu:e08e7000(4fc01000) ret 0.
  497. <6>sunxi_leds driver init
  498. [ 2.290836] sunxi_leds driver init
  499. <6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  500. [ 2.302583] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  501. <6>sunxi leds can't find script data '[leds_para]' 'leds_used'
  502. [ 2.317537] sunxi leds can't find script data '[leds_para]' 'leds_used'
  503. <6>usbcore: registered new interface driver usbhid
  504. [ 2.329135] usbcore: registered new interface driver usbhid
  505. <6>[mmc-msg] sdc0 set round clock 400000, src 24000000
  506. [ 2.339613] [mmc-msg] sdc0 set round clock 400000, src 24000000
  507. <6>usbhid: USB HID core driver
  508. [ 2.348321] usbhid: USB HID core driver
  509. <6>IPv4 over IPv4 tunneling driver
  510. [ 2.357003] IPv4 over IPv4 tunneling driver
  511. <6>TCP: cubic registered
  512. [ 2.363918] TCP: cubic registered
  513. <6>Initializing XFRM netlink socket
  514. [ 2.370502] Initializing XFRM netlink socket
  515. <6>NET: Registered protocol family 17
  516. [ 2.378201] NET: Registered protocol family 17
  517. <6>NET: Registered protocol family 15
  518. [ 2.386062] NET: Registered protocol family 15
  519. <6>8021q: 802.1Q VLAN Support v1.8
  520. [ 2.393755] 8021q: 802.1Q VLAN Support v1.8
  521. <5>Registering the dns_resolver key type
  522. [ 2.401620] Registering the dns_resolver key type
  523. <6>VFP support v0.3: [ 2.408275] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
  524. implementor 41 architecture 3 part 30 variant c rev 3
  525. <5>Registering SWP/SWPB emulation handler
  526. [ 2.424515] Registering SWP/SWPB emulation handler
  527. <6>registered taskstats version 1
  528. [ 2.432658] registered taskstats version 1
  529. <6>I2C: i2c-3: HDMI I2C adapter
  530. [ 2.441119] I2C: i2c-3: HDMI I2C adapter
  531. <3>[mmc-err] smc 0 err, cmd 52, RTO
  532. [ 2.449217] [mmc-err] smc 0 err, cmd 52, RTO
  533. <3>[mmc-err] smc 0 err, cmd 52, RTO
  534. [ 2.457693] [mmc-err] smc 0 err, cmd 52, RTO
  535. <6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  536. [ 2.470388] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  537. <6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  538. [ 2.490486] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  539. <6>disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0
  540. [ 2.507372] disp clks: lcd 74250000 pre_scale 1 hdmi 74250000 pll 297000000 2x 0
  541. <3>[mmc-err] smc 0 err, cmd 5, RTO
  542. [ 2.518836] [mmc-err] smc 0 err, cmd 5, RTO
  543. <3>[mmc-err] smc 0 err, cmd 5, RTO
  544. [ 2.527139] [mmc-err] smc 0 err, cmd 5, RTO
  545. <3>[mmc-err] smc 0 err, cmd 5, RTO
  546. [ 2.535435] [mmc-err] smc 0 err, cmd 5, RTO
  547. <3>[mmc-err] smc 0 err, cmd 5, RTO
  548. [ 2.543748] [mmc-err] smc 0 err, cmd 5, RTO
  549. <6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  550. [ 2.562466] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  551. <6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  552. [ 2.622156] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  553. <6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  554. [ 2.663155] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  555. <6>[mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  556. [ 2.735172] [mmc-msg] sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  557. <6>[mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  558. [ 2.772252] [mmc-msg] sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  559. <6>[mmc-msg] sdc0 set round clock 46153846, src 1200000000
  560. [ 2.809082] [mmc-msg] sdc0 set round clock 46153846, src 1200000000
  561. <3>[mmc-err] update clock timeout, fatal error
  562. [ 3.838072] [mmc-err] update clock timeout, fatal error
  563. <6>Console: switching to colour frame buffer device 160x45
  564. [ 4.007936] Console: switching to colour frame buffer device 160x45
  565. <3>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  566. [ 4.059719] drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
  567. <6>ALSA device list:
  568. [ 4.075894] ALSA device list:
  569. <6> #0: sunxi-CODEC Audio Codec
  570. [ 4.081909] #0: sunxi-CODEC Audio Codec
  571. <6>Waiting for root device /dev/mmcblk0p2...
  572. [ 4.108331] Waiting for root device /dev/mmcblk0p2...
  573. <3>[mmc-err] update clock timeout, fatal error
  574. [ 4.838136] [mmc-err] update clock timeout, fatal error
  575. <3>[mmc-err] update clock timeout, fatal error
  576. [ 5.838201] [mmc-err] update clock timeout, fatal error
  577. <3>mmc0: error -123 whilst initialising SD card
  578. [ 5.908325] mmc0: error -123 whilst initialising SD card
  579. <6>[mmc-msg] sdc0 set ios: clk 50000000Hz bm OD pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  580. [ 5.922055] [mmc-msg] sdc0 set ios: clk 50000000Hz bm OD pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
  581. <6>[mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  582. [ 5.939530] [mmc-msg] sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
  583. <6>[mmc-msg] sdc0 power off
  584. [ 5.951100] [mmc-msg] sdc0 power off
  585. <3>[mmc-err] update clock timeout, fatal error
  586. [ 6.958277] [mmc-err] update clock timeout, fatal error
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!