API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jun 8th, 2020
575
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 13.06 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Booting Linux on physical CPU 0x0
  2. [ 0.000000] Linux version 4.19.123 (lauro@Server) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r13292-5f82691923)) #0 SMP Tue May 19 11:33:39 2020
  3. [ 0.000000] CPU: ARMv7 Processor [512f04d0] revision 0 (ARMv7), cr=10c5787d
  4. [ 0.000000] CPU: div instructions available: patching division code
  5. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
  6. [ 0.000000] OF: fdt: Machine model: NEC Aterm WG2600HP
  7. [ 0.000000] Memory policy: Data cache writealloc
  8. [ 0.000000] random: get_random_bytes called from start_kernel+0x80/0x47c with crng_init=0
  9. [ 0.000000] percpu: Embedded 15 pages/cpu s29964 r8192 d23284 u61440
  10. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 121800
  11. [ 0.000000] Kernel command line:
  12. [ 0.000000] Bootloader command line (ignored):
  13. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
  14. [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
  15. [ 0.000000] Memory: 471784K/491520K available (5258K kernel code, 180K rwdata, 1364K rodata, 7168K init, 228K bss, 19736K reserved, 0K cma-reserved, 0K highmem)
  16. [ 0.000000] Virtual kernel memory layout:
  17. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  18. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  19. [ 0.000000] vmalloc : 0xde800000 - 0xff800000 ( 528 MB)
  20. [ 0.000000] lowmem : 0xc0000000 - 0xde000000 ( 480 MB)
  21. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  22. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  23. [ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (6251 kB)
  24. [ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (7168 kB)
  25. [ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 181 kB)
  26. [ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 229 kB)
  27. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  28. [ 0.000000] rcu: Hierarchical RCU implementation.
  29. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
  30. [ 0.000000] clocksource: dg_timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 305801671480 ns
  31. [ 0.000007] sched_clock: 32 bits at 6MHz, resolution 160ns, wraps every 343597383600ns
  32. [ 0.000020] Switching to timer-based delay loop, resolution 160ns
  33. [ 0.000240] Calibrating delay loop (skipped), value calculated using timer frequency.. 12.50 BogoMIPS (lpj=62500)
  34. [ 0.000260] pid_max: default: 32768 minimum: 301
  35. [ 0.000429] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  36. [ 0.000446] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  37. [ 0.001334] CPU: Testing write buffer coherency: ok
  38. [ 0.002465] Setting up static identity map for 0x42300000 - 0x42300060
  39. [ 0.002642] rcu: Hierarchical SRCU implementation.
  40. [ 0.003468] smp: Bringing up secondary CPUs ...
  41. [ 0.005378] smp: Brought up 1 node, 2 CPUs
  42. [ 0.005396] SMP: Total of 2 processors activated (25.00 BogoMIPS).
  43. [ 0.005406] CPU: All CPU(s) started in SVC mode.
  44. [ 0.015256] VFP support v0.3: implementor 51 architecture 64 part 4d variant 2 rev 0
  45. [ 0.015408] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  46. [ 0.015438] futex hash table entries: 512 (order: 3, 32768 bytes)
  47. [ 0.015598] pinctrl core: initialized pinctrl subsystem
  48. [ 0.016747] NET: Registered protocol family 16
  49. [ 0.017032] DMA: preallocated 256 KiB pool for atomic coherent allocations
  50. [ 0.018394] cpuidle: using governor ladder
  51. [ 0.018468] cpuidle: using governor menu
  52. [ 0.041942] usbcore: registered new interface driver usbfs
  53. [ 0.042026] usbcore: registered new interface driver hub
  54. [ 0.042108] usbcore: registered new device driver usb
  55. [ 0.042172] pps_core: LinuxPPS API ver. 1 registered
  56. [ 0.042187] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  57. [ 0.042220] PTP clock support registered
  58. [ 0.043863] clocksource: Switched to clocksource dg_timer
  59. [ 0.047065] NET: Registered protocol family 2
  60. [ 0.047628] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
  61. [ 0.047667] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
  62. [ 0.047707] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
  63. [ 0.047762] TCP: Hash tables configured (established 4096 bind 4096)
  64. [ 0.047864] UDP hash table entries: 256 (order: 1, 8192 bytes)
  65. [ 0.047892] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
  66. [ 0.048126] NET: Registered protocol family 1
  67. [ 0.193008] No memory allocated for crashlog
  68. [ 0.193351] workingset: timestamp_bits=14 max_order=17 bucket_order=3
  69. [ 0.199488] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  70. [ 0.199504] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  71. [ 0.207254] io scheduler noop registered
  72. [ 0.207275] io scheduler deadline registered (default)
  73. [ 0.209016] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda not found, using dummy regulator
  74. [ 0.209144] qcom-pcie 1b500000.pci: Linked as a consumer to regulator.0
  75. [ 0.209172] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_phy not found, using dummy regulator
  76. [ 0.209302] qcom-pcie 1b500000.pci: 1b500000.pci supply vdda_refclk not found, using dummy regulator
  77. [ 0.209582] qcom-pcie 1b500000.pci: host bridge /soc/pci@1b500000 ranges:
  78. [ 0.209642] qcom-pcie 1b500000.pci: IO 0x0fe00000..0x0fefffff -> 0x0fe00000
  79. [ 0.209674] qcom-pcie 1b500000.pci: MEM 0x08000000..0x0fdfffff -> 0x08000000
  80. [ 0.326570] qcom-pcie 1b500000.pci: PCI host bridge to bus 0000:00
  81. [ 0.326596] pci_bus 0000:00: root bus resource [bus 00-ff]
  82. [ 0.326619] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfe00000-0xfefffff])
  83. [ 0.326634] pci_bus 0000:00: root bus resource [mem 0x08000000-0x0fdfffff]
  84. [ 0.330760] PCI: bus0: Fast back to back transfers disabled
  85. [ 0.336771] PCI: bus1: Fast back to back transfers disabled
  86. [ 0.336871] pci 0000:00:00.0: BAR 8: assigned [mem 0x08000000-0x081fffff]
  87. [ 0.336898] pci 0000:01:00.0: BAR 0: assigned [mem 0x08000000-0x081fffff 64bit]
  88. [ 0.337027] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
  89. [ 0.337051] pci 0000:00:00.0: bridge window [mem 0x08000000-0x081fffff]
  90. [ 0.337646] pcieport 0000:00:00.0: AER enabled with IRQ 35
  91. [ 0.338109] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda not found, using dummy regulator
  92. [ 0.338218] qcom-pcie 1b700000.pci: Linked as a consumer to regulator.0
  93. [ 0.338246] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_phy not found, using dummy regulator
  94. [ 0.338357] qcom-pcie 1b700000.pci: 1b700000.pci supply vdda_refclk not found, using dummy regulator
  95. [ 0.338637] qcom-pcie 1b700000.pci: host bridge /soc/pci@1b700000 ranges:
  96. [ 0.338693] qcom-pcie 1b700000.pci: IO 0x31e00000..0x31efffff -> 0x31e00000
  97. [ 0.338720] qcom-pcie 1b700000.pci: MEM 0x2e000000..0x31dfffff -> 0x2e000000
  98. [ 0.458731] qcom-pcie 1b700000.pci: PCI host bridge to bus 0001:00
  99. [ 0.458751] pci_bus 0001:00: root bus resource [bus 00-ff]
  100. [ 0.458767] pci_bus 0001:00: root bus resource [mem 0x2e000000-0x31dfffff]
  101. [ 0.462772] PCI: bus0: Fast back to back transfers disabled
  102. [ 0.465051] pci 0001:01:00.0: 2.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x1 link at 0001:00:00.0 (capable of 4.000 Gb/s with 5 GT/s x1 link)
  103. [ 0.468915] PCI: bus1: Fast back to back transfers disabled
  104. [ 0.469002] pci 0001:00:00.0: BAR 8: assigned [mem 0x2e000000-0x2e1fffff]
  105. [ 0.469027] pci 0001:01:00.0: BAR 0: assigned [mem 0x2e000000-0x2e1fffff 64bit]
  106. [ 0.469161] pci 0001:00:00.0: PCI bridge to [bus 01-ff]
  107. [ 0.469182] pci 0001:00:00.0: bridge window [mem 0x2e000000-0x2e1fffff]
  108. [ 0.469712] pcieport 0001:00:00.0: AER enabled with IRQ 37
  109. [ 0.472124] L2 @ QSB rate. Forcing new rate.
  110. [ 0.472356] L2 @ 384000 KHz
  111. [ 0.472540] CPU0 @ 800000 KHz
  112. [ 0.472554] CPU1 @ QSB rate. Forcing new rate.
  113. [ 0.472685] CPU1 @ 384000 KHz
  114. [ 0.476411] gsbi 16300000.gsbi: GSBI port protocol: 6 crci: 0
  115. [ 0.477752] gsbi 1a200000.gsbi: GSBI port protocol: 3 crci: 0
  116. [ 0.479375] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
  117. [ 0.480180] msm_serial 16340000.serial: msm_serial: detected port #0
  118. [ 0.480231] msm_serial 16340000.serial: uartclk = 7372800
  119. [ 0.480304] 16340000.serial: ttyMSM0 at MMIO 0x16340000 (irq = 38, base_baud = 460800) is a MSM
  120. [ 0.480345] msm_serial: console setup on port #0
  121. [ 1.228825] console [ttyMSM0] enabled
  122. [ 1.233798] msm_serial: driver initialized
  123. [ 1.242267] loop: module loaded
  124. [ 1.243716] spi_qup 1a280000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
  125. [ 1.245612] m25p80 spi0.0: unrecognized JEDEC id bytes: 00, 00, 00
  126. [ 1.251535] m25p80: probe of spi0.0 failed with error -2
  127. [ 1.258608] libphy: GPIO Bitbanged MDIO: probed
  128. [ 1.304846] switch0: Atheros AR8337 rev. 2 switch registered on gpio-0
  129. [ 2.165348] ar8327: qca,phy-rgmii-en is not specified
  130. [ 2.165772] libphy: Fixed MDIO Bus: probed
  131. [ 2.189331] ipq806x-gmac-dwmac 37200000.ethernet: PTP uses main clock
  132. [ 2.189988] ipq806x-gmac-dwmac 37200000.ethernet: User ID: 0x10, Synopsys ID: 0x37
  133. [ 2.194870] ipq806x-gmac-dwmac 37200000.ethernet: DWMAC1000
  134. [ 2.202227] ipq806x-gmac-dwmac 37200000.ethernet: DMA HW capability register supported
  135. [ 2.208118] ipq806x-gmac-dwmac 37200000.ethernet: RX Checksum Offload Engine supported
  136. [ 2.215836] ipq806x-gmac-dwmac 37200000.ethernet: COE Type 2
  137. [ 2.223664] ipq806x-gmac-dwmac 37200000.ethernet: TX Checksum insertion supported
  138. [ 2.229549] ipq806x-gmac-dwmac 37200000.ethernet: Wake-Up On Lan supported
  139. [ 2.236955] ipq806x-gmac-dwmac 37200000.ethernet: Enhanced/Alternate descriptors
  140. [ 2.243632] ipq806x-gmac-dwmac 37200000.ethernet: Enabled extended descriptors
  141. [ 2.251260] ipq806x-gmac-dwmac 37200000.ethernet: Ring mode enabled
  142. [ 2.258290] ipq806x-gmac-dwmac 37200000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  143. [ 2.264457] ipq806x-gmac-dwmac 37200000.ethernet (unnamed net_device) (uninitialized): device MAC address 82:72:f7:bf:40:f0
  144. [ 2.293416] ipq806x-gmac-dwmac 37400000.ethernet: PTP uses main clock
  145. [ 2.293814] ipq806x-gmac-dwmac 37400000.ethernet: User ID: 0x10, Synopsys ID: 0x37
  146. [ 2.298957] ipq806x-gmac-dwmac 37400000.ethernet: DWMAC1000
  147. [ 2.306420] ipq806x-gmac-dwmac 37400000.ethernet: DMA HW capability register supported
  148. [ 2.312130] ipq806x-gmac-dwmac 37400000.ethernet: RX Checksum Offload Engine supported
  149. [ 2.319929] ipq806x-gmac-dwmac 37400000.ethernet: COE Type 2
  150. [ 2.327828] ipq806x-gmac-dwmac 37400000.ethernet: TX Checksum insertion supported
  151. [ 2.333568] ipq806x-gmac-dwmac 37400000.ethernet: Wake-Up On Lan supported
  152. [ 2.341016] ipq806x-gmac-dwmac 37400000.ethernet: Enhanced/Alternate descriptors
  153. [ 2.347791] ipq806x-gmac-dwmac 37400000.ethernet: Enabled extended descriptors
  154. [ 2.355352] ipq806x-gmac-dwmac 37400000.ethernet: Ring mode enabled
  155. [ 2.362300] ipq806x-gmac-dwmac 37400000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  156. [ 2.368548] ipq806x-gmac-dwmac 37400000.ethernet (unnamed net_device) (uninitialized): device MAC address 0a:7a:05:4a:59:76
  157. [ 2.378047] i2c /dev entries driver
  158. [ 2.390309] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
  159. [ 2.391655] cpuidle: enable-method property 'qcom,kpss-acc-v1' found operations
  160. [ 2.399482] sdhci: Secure Digital Host Controller Interface driver
  161. [ 2.406114] sdhci: Copyright(c) Pierre Ossman
  162. [ 2.412294] sdhci-pltfm: SDHCI platform and OF driver helper
  163. [ 2.418987] NET: Registered protocol family 10
  164. [ 2.423907] Segment Routing with IPv6
  165. [ 2.426891] NET: Registered protocol family 17
  166. [ 2.430691] 8021q: 802.1Q VLAN Support v1.8
  167. [ 2.434907] Registering SWP/SWPB emulation handler
  168. [ 2.457286] qcom_rpm 108000.rpm: RPM firmware 3.0.16777377
  169. [ 2.471469] s1a: supplied by regulator-dummy
  170. [ 2.471584] s1a: Bringing 0uV into 1050000-1050000uV
  171. [ 2.475201] s1b: supplied by regulator-dummy
  172. [ 2.479817] s1b: Bringing 0uV into 1050000-1050000uV
  173. [ 2.484313] s2a: supplied by regulator-dummy
  174. [ 2.489017] s2a: Bringing 0uV into 800000-800000uV
  175. [ 2.493450] s2b: supplied by regulator-dummy
  176. [ 2.497949] s2b: Bringing 0uV into 800000-800000uV
  177. [ 2.503805] Speed bin: 0
  178. [ 2.506895] PVS bin: 4
  179. [ 2.509867] cpu cpu0: Linked as a consumer to regulator.4
  180. [ 2.511780] cpu cpu0: Dropping the link to regulator.4
  181. [ 2.517454] cpu cpu0: Linked as a consumer to regulator.4
  182. [ 2.522225] cpu cpu0: opp_parse_supplies: opp-microvolt missing although OPP managing regulators
  183. [ 2.527768] cpu cpu0: _of_add_opp_table_v2: Failed to add OPP, -22
  184. [ 2.536682] cpu cpu0: Dropping the link to regulator.4
  185. [ 2.542736] cpu cpu1: Linked as a consumer to regulator.5
  186. [ 2.547713] cpu cpu1: opp_parse_supplies: opp-microvolt missing although OPP managing regulators
  187. [ 2.553110] cpu cpu1: _of_add_opp_table_v2: Failed to add OPP, -22
  188. [ 2.562099] cpu cpu1: Dropping the link to regulato #It just abruptly stops here.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!