API tools faq
paste
Guest User

Untitled

a guest
Nov 3rd, 2022
64
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 51.82 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 4.9.224-5.9.vniins2.sparc64-e90s ([email protected]) (gcc version 4.1.3 20080704 (prerelease)) #1 SMP Sun Jun 6 22:42:13 MSK 2021
  2. [ 0.000000] prom_getbootargs() command line 0x0000000000edd7c8 : text lang=ru_RU.KOI8-R video=mgam83fb:1024x768@60 root=/dev/sda2 dospartlabel
  3. [ 0.000000] ARCH: SUN4U
  4. [ 0.000000] max_iolinks corrected = 8
  5. [ 0.000000] Base MAC address 98:a7:b0:00:00:00
  6. [ 0.000000] bootconsole [early_dump0] enabled
  7. [ 0.000000] found SMP MP-table at 0x00000000f04d8000
  8. [ 0.000000] MultiProcessor Specification v1.4
  9. [ 0.000000] Virtual Wire compatibility mode.
  10. [ 0.000000] OEM ID: LNXI
  11. [ 0.000000] Product ID: 440GX
  12. [ 0.000000] APIC at: 0xFEE00000
  13. [ 0.000000] Processor APIC ID #0 version 20
  14. [ 0.000000] Processor APIC ID #1 version 20
  15. [ 0.000000] Processor APIC ID #2 version 20
  16. [ 0.000000] Processor APIC ID #3 version 20
  17. [ 0.000000] Processor APIC ID #4 version 20
  18. [ 0.000000] Processor APIC ID #5 version 20
  19. [ 0.000000] Processor APIC ID #6 version 20
  20. [ 0.000000] Processor APIC ID #7 version 20
  21. [ 0.000000] IO link #0 on node 0, version 0xffff,
  22. [ 0.000000] connected to IOHUB: min bus #1 max bus #8 IO APIC ID 64
  23. [ 0.000000] Kernel unaligned access at TPC[e44f0c] MP_iolink_info+0xcc/0x180
  24. [ 0.000000] Kernel unaligned access at TPC[e44f1c] MP_iolink_info+0xdc/0x180
  25. [ 0.000000] Kernel unaligned access at TPC[e44f24] MP_iolink_info+0xe4/0x180
  26. [ 0.000000] Kernel unaligned access at TPC[e44f2c] MP_iolink_info+0xec/0x180
  27. [ 0.000000] Kernel unaligned access at TPC[e44f34] MP_iolink_info+0xf4/0x180
  28. [ 0.000000] System timer type 1 Version 1 at 0x401000.
  29. [ 0.000000] i2c_spi_info: control base addr = 0000000010000000, data base addr = 0000000010000040, IRQ 15 IOHUB revision 07
  30. [ 0.000000] IOAPIC[0]: apic_id 64, version 17, address 0x200100, GSI 0-23
  31. [ 0.000000] Processors: 8
  32. [ 0.000000] nr_irqs_gsi: 24
  33. [ 0.000000] Kernel: Using 3 locked TLB entries for main kernel image.
  34. [ 0.000000] Remapping the kernel...
  35. [ 0.000000] done.
  36. [ 0.000000] Allocated 24576 bytes for kernel page tables.
  37. [ 0.000000] Zone ranges:
  38. [ 0.000000] Normal [mem 0x0000000080000000-0x000000047fffffff]
  39. [ 0.000000] Movable zone start for each node
  40. [ 0.000000] Early memory node ranges
  41. [ 0.000000] node 0: [mem 0x0000000080000000-0x000000047fffffff]
  42. [ 0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000047fffffff]
  43. [ 0.000000] On node 0 totalpages: 2097152
  44. [ 0.000000] Normal zone: 18432 pages used for memmap
  45. [ 0.000000] Normal zone: 0 pages reserved
  46. [ 0.000000] Normal zone: 2097152 pages, LIFO batch:15
  47. [ 0.000000] Booting Linux...
  48. [ 0.000000] CPU CAPS: [flush,stbar,swap,muldiv,v9,ultra3,mul32,div32]
  49. [ 0.000000] CPU CAPS: [v8plus,vis,vis2]
  50. [ 0.000000] DevTree: disabled (incorrect magic): 9de3bf40
  51. [ 0.000000] DevTree: device tree size is 0
  52. [ 0.000000] percpu: Embedded 9 pages/cpu s34816 r8192 d30720 u524288
  53. [ 0.000000] pcpu-alloc: s34816 r8192 d30720 u524288 alloc=1*4194304
  54. [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
  55. [ 0.000000] CPU[0]: Caches D[sz(32768):line_sz(64)] I[sz(16384):line_sz(64)] E[sz(2097152):line_sz(64)]
  56. [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 2078720
  57. [ 0.000000] Policy zone: Normal
  58. [ 0.000000] Kernel command line: text lang=ru_RU.KOI8-R video=mgam83fb:1024x768@60 root=/dev/sda2 dospartlabel
  59. [ 0.000000] PID hash table entries: 4096 (order: 2, 32768 bytes)
  60. [ 0.000000] Sorting __ex_table...
  61. [ 0.000000] Memory: 16588176K/16777216K available (7373K kernel code, 837K rwdata, 2208K rodata, 624K init, 608K bss, 189040K reserved, 0K cma-reserved)
  62. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=4
  63. [ 0.000000] Hierarchical RCU implementation.
  64. [ 0.000000] Build-time adjustment of leaf fanout to 64.
  65. [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
  66. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=8
  67. [ 0.000000] NR_IRQS:768 nr_irqs:410 0
  68. [ 0.000000] Switched APIC routing to physical flat.
  69. [ 0.000000] Console: colour dummy device 80x25
  70. [ 0.000000] console [tty0] enabled
  71. [ 0.000000] bootconsole [early_dump0] disabled
  72. [ 0.000000] Zilog: console probe ...
  73. [ 0.000000] Zilog: console init port 0, control_reg = 0x401040
  74. [ 0.000000] Zilog: console init port 1, control_reg = 0x401042
  75. [ 0.000000] found
  76. [ 0.000000] Node #0 IO LINK #0 is IO HUB controller ON connected to unknown controller
  77. [ 0.160000] Calibrating delay using timer specific routine.. 200.20 BogoMIPS (lpj=1001001)
  78. [ 0.160000] pid_max: default: 32768 minimum: 301
  79. [ 0.160000] Security Framework initialized
  80. [ 0.160000] MCBC: Initializing.
  81. [ 0.160000] Dentry cache hash table entries: 2097152 (order: 11, 16777216 bytes)
  82. [ 0.170000] Inode-cache hash table entries: 1048576 (order: 10, 8388608 bytes)
  83. [ 0.180000] Mount-cache hash table entries: 32768 (order: 5, 262144 bytes)
  84. [ 0.180000] Mountpoint-cache hash table entries: 32768 (order: 5, 262144 bytes)
  85. [ 0.180000] ftrace: allocating 24720 entries in 49 pages
  86. [ 0.220000] CPU: Unknown chip, impl[0x17] vers[0x14]
  87. [ 0.220000] FPU: Unknown chip, impl[0x17] vers[0x14]
  88. [ 0.010000] CPU[1]: Caches D[sz(32768):line_sz(64)] I[sz(16384):line_sz(64)] E[sz(2097152):line_sz(64)]
  89. [ 0.010000] CPU[2]: Caches D[sz(32768):line_sz(64)] I[sz(16384):line_sz(64)] E[sz(2097152):line_sz(64)]
  90. [ 0.010000] CPU[3]: Caches D[sz(32768):line_sz(64)] I[sz(16384):line_sz(64)] E[sz(2097152):line_sz(64)]
  91. [ 0.010000] CPU[4]: Caches D[sz(32768):line_sz(64)] I[sz(16384):line_sz(64)] E[sz(2097152):line_sz(64)]
  92. [ 0.010000] CPU[5]: Caches D[sz(32768):line_sz(64)] I[sz(16384):line_sz(64)] E[sz(2097152):line_sz(64)]
  93. [ 0.010000] CPU[6]: Caches D[sz(32768):line_sz(64)] I[sz(16384):line_sz(64)] E[sz(2097152):line_sz(64)]
  94. [ 0.010000] CPU[7]: Caches D[sz(32768):line_sz(64)] I[sz(16384):line_sz(64)] E[sz(2097152):line_sz(64)]
  95. [ 1.270000] Brought up 8 CPUs
  96. [ 1.270000] CPU 1: synchronized TICK with master CPU (last diff 0 cycles, maxerr 24 cycles)
  97. [ 1.270000] CYCLES_SYNC ERR cpu1: slv=0xc27bd5800 mst=0x1635ed83f
  98. [ 1.270000] CPU 2: synchronized TICK with master CPU (last diff 0 cycles, maxerr 25 cycles)
  99. [ 1.270000] CYCLES_SYNC ERR cpu2: slv=0xc2653c000 mst=0x1635f1042
  100. [ 1.270000] CPU 3: synchronized TICK with master CPU (last diff 0 cycles, maxerr 25 cycles)
  101. [ 1.270000] CYCLES_SYNC ERR cpu3: slv=0xc2568c000 mst=0x1635f4842
  102. [ 1.270000] CPU 4: synchronized TICK with master CPU (last diff -1 cycles, maxerr 70 cycles)
  103. [ 1.270000] CYCLES_SYNC ERR cpu4: slv=0xc24800800 mst=0x1635fb85e
  104. [ 1.270000] CPU 5: synchronized TICK with master CPU (last diff 0 cycles, maxerr 70 cycles)
  105. [ 1.270000] CYCLES_SYNC ERR cpu5: slv=0xc228c1000 mst=0x16360284f
  106. [ 1.270000] CPU 6: synchronized TICK with master CPU (last diff 1 cycles, maxerr 70 cycles)
  107. [ 1.270000] CYCLES_SYNC ERR cpu6: slv=0xc21391800 mst=0x163609855
  108. [ 1.270000] CPU 7: synchronized TICK with master CPU (last diff 1 cycles, maxerr 70 cycles)
  109. [ 1.270000] CYCLES_SYNC ERR cpu7: slv=0xc20505000 mst=0x163610856
  110. [ 1.270000] devtmpfs: initialized
  111. [ 1.280000] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  112. [ 1.280000] futex hash table entries: 2048 (order: 4, 131072 bytes)
  113. [ 1.280000] NET: Registered protocol family 16
  114. [ 1.330047] cpuidle: using governor ladder
  115. [ 1.400027] cpuidle: using governor menu
  116. [ 1.400175] PCI: Using Elbrus configuration type
  117. [ 1.400200] clocksource: lt: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 191126044627 ns
  118. [ 59.751121] clocksource: clkr: mask: 0xffffffffffffffff max_cycles: 0x1710228f68, max_idle_ns: 440795203188 ns
  119. [ 59.821427] HugeTLB registered 8 MB page size, pre-allocated 0 pages
  120. [ 59.822550] vgaarb: loaded
  121. [ 59.822906] SCSI subsystem initialized
  122. [ 59.823141] libata version 3.00 loaded.
  123. [ 59.823423] usbcore: registered new interface driver usbfs
  124. [ 59.823507] usbcore: registered new interface driver hub
  125. [ 59.823645] usbcore: registered new device driver usb
  126. [ 59.823804] pps_core: LinuxPPS API ver. 1 registered
  127. [ 59.823825] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
  128. [ 59.823882] PTP clock support registered
  129. [ 59.824394] PCI host bridge to bus 0000:00
  130. [ 59.824411] pci_bus 0000:00: root bus resource [io 0xff20000000-0xffffffffffffffff] (bus address [0x0000-0xffffff00dfffffff])
  131. [ 59.824419] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffffffffffff]
  132. [ 59.824451] pci 0000:00:00.0: [1fff:8017] type 01 class 0x060400
  133. [ 59.824485] pci 0000:00:00.0: reg 0x10: [mem 0x00100000-0x0010003f 64bit]
  134. [ 59.824527] pci_msi_setup_pci_dev 0000:00:00.0: msix_cap = 0
  135. [ 59.824777] pci_bus 0000:01: busn_res: can not insert [bus 01-08] under [??? 0x00000000 flags 0x0] (conflicts with (null) [??? 0x00000000 flags 0x0])
  136. [ 59.824796] pci 0000:01:00.0: [1fff:8000] type 01 class 0x060400
  137. [ 59.824840] pci_msi_setup_pci_dev 0000:01:00.0: msix_cap = 0
  138. [ 59.824986] pci 0000:01:01.0: [1fff:8016] type 00 class 0x020000
  139. [ 59.825006] pci 0000:01:01.0: reg 0x10: [mem 0x00200000-0x0020001f]
  140. [ 59.825059] pci_msi_setup_pci_dev 0000:01:01.0: msix_cap = 0
  141. [ 59.825193] pci 0000:01:01.1: [1fff:8016] type 00 class 0x020000
  142. [ 59.825212] pci 0000:01:01.1: reg 0x10: [mem 0x00200020-0x0020003f]
  143. [ 59.825265] pci_msi_setup_pci_dev 0000:01:01.1: msix_cap = 0
  144. [ 59.825398] pci 0000:01:01.2: [1fff:8016] type 00 class 0x020000
  145. [ 59.825418] pci 0000:01:01.2: reg 0x10: [mem 0x00200040-0x0020005f]
  146. [ 59.825472] pci_msi_setup_pci_dev 0000:01:01.2: msix_cap = 0
  147. [ 59.825622] pci 0000:01:02.0: [1fff:800b] type 00 class 0x01018f
  148. [ 59.825641] pci 0000:01:02.0: reg 0x10: [io 0xff20001000-0xff20001007]
  149. [ 59.825655] pci 0000:01:02.0: reg 0x14: [io 0xff20001008-0xff2000100b]
  150. [ 59.825668] pci 0000:01:02.0: reg 0x18: [io 0xff20001010-0xff20001017]
  151. [ 59.825682] pci 0000:01:02.0: reg 0x1c: [io 0xff20001018-0xff2000101b]
  152. [ 59.825696] pci 0000:01:02.0: reg 0x20: [io 0xff20001020-0xff2000102f]
  153. [ 59.825722] pci_msi_setup_pci_dev 0000:01:02.0: msix_cap = 0
  154. [ 59.825861] pci 0000:01:02.1: [1fff:8018] type 00 class 0x070200
  155. [ 59.825880] pci 0000:01:02.1: reg 0x10: [mem 0x10000000-0x1000003f pref]
  156. [ 59.825894] pci 0000:01:02.1: reg 0x14: [mem 0x10000040-0x1000007f pref]
  157. [ 59.825938] pci 0000:01:02.1: MSI address at: 0x300000; IOHUB generation:1,revision 7
  158. [ 59.825947] pci_msi_setup_pci_dev 0000:01:02.1: msix_cap = 0
  159. [ 59.826085] pci 0000:01:02.2: [1fff:8019] type 00 class 0x078000
  160. [ 59.826103] pci 0000:01:02.2: reg 0x10: [io 0xff20001040-0xff2000105f]
  161. [ 59.826117] pci 0000:01:02.2: reg 0x14: [mem 0x00401040-0x0040104f]
  162. [ 59.826159] pci_msi_setup_pci_dev 0000:01:02.2: msix_cap = 0
  163. [ 59.826306] pci 0000:01:02.3: [1fff:800a] type 00 class 0x040100
  164. [ 59.826324] pci 0000:01:02.3: reg 0x10: [mem 0x00404000-0x00407fff]
  165. [ 59.826373] pci_msi_setup_pci_dev 0000:01:02.3: msix_cap = 0
  166. [ 59.826509] pci 0000:01:02.4: [1fff:8014] type 00 class 0x078000
  167. [ 59.826528] pci 0000:01:02.4: reg 0x10: [mem 0x00408000-0x0040801f]
  168. [ 59.826542] pci 0000:01:02.4: reg 0x14: [mem 0x00408080-0x004080ff]
  169. [ 59.826586] pci_msi_setup_pci_dev 0000:01:02.4: msix_cap = 0
  170. [ 59.826726] pci 0000:01:03.0: [1fff:801a] type 00 class 0x010601
  171. [ 59.826744] pci 0000:01:03.0: reg 0x10: [io 0xff20001060-0xff20001067]
  172. [ 59.826758] pci 0000:01:03.0: reg 0x14: [io 0xff20001070-0xff2000107f]
  173. [ 59.826771] pci 0000:01:03.0: reg 0x18: [io 0xff20001080-0xff20001087]
  174. [ 59.826784] pci 0000:01:03.0: reg 0x1c: [io 0xff20001090-0xff2000109f]
  175. [ 59.826797] pci 0000:01:03.0: reg 0x20: [io 0xff200010a0-0xff200010af]
  176. [ 59.826811] pci 0000:01:03.0: reg 0x24: [mem 0x0040a000-0x0040bfff]
  177. [ 59.826829] pci_msi_setup_pci_dev 0000:01:03.0: msix_cap = 0
  178. [ 59.826976] pci 0000:01:03.1: [1fff:801a] type 00 class 0x010601
  179. [ 59.826994] pci 0000:01:03.1: reg 0x10: [io 0xff200010b0-0xff200010b7]
  180. [ 59.827008] pci 0000:01:03.1: reg 0x14: [io 0xff200010c0-0xff200010cf]
  181. [ 59.827021] pci 0000:01:03.1: reg 0x18: [io 0xff200010d0-0xff200010d7]
  182. [ 59.827034] pci 0000:01:03.1: reg 0x1c: [io 0xff200010e0-0xff200010ef]
  183. [ 59.827047] pci 0000:01:03.1: reg 0x20: [io 0xff200010f0-0xff200010ff]
  184. [ 59.827060] pci 0000:01:03.1: reg 0x24: [mem 0x0040c000-0x0040dfff]
  185. [ 59.827079] pci_msi_setup_pci_dev 0000:01:03.1: msix_cap = 0
  186. [ 59.827238] pci 0000:01:04.0: [1fff:8010] type 01 class 0x060400
  187. [ 59.827262] pci 0000:01:04.0: reg 0x10: [mem 0x0040e000-0x0040e03f 64bit]
  188. [ 59.827295] pci_msi_setup_pci_dev 0000:01:04.0: msix_cap = 0
  189. [ 59.827319] pci 0000:01:04.0: supports D1
  190. [ 59.827325] pci 0000:01:04.0: PME# supported from D0 D1 D3hot D3cold
  191. [ 59.827473] pci 0000:01:05.0: [1fff:8010] type 01 class 0x060400
  192. [ 59.827497] pci 0000:01:05.0: reg 0x10: [mem 0x00800000-0x0080003f 64bit]
  193. [ 59.827530] pci_msi_setup_pci_dev 0000:01:05.0: msix_cap = 0
  194. [ 59.827553] pci 0000:01:05.0: supports D1
  195. [ 59.827559] pci 0000:01:05.0: PME# supported from D0 D1 D3hot D3cold
  196. [ 59.827715] pci 0000:01:06.0: [1fff:8010] type 01 class 0x060400
  197. [ 59.827739] pci 0000:01:06.0: reg 0x10: [mem 0x00900000-0x0090003f 64bit]
  198. [ 59.827773] pci_msi_setup_pci_dev 0000:01:06.0: msix_cap = 0
  199. [ 59.827796] pci 0000:01:06.0: supports D1
  200. [ 59.827802] pci 0000:01:06.0: PME# supported from D0 D1 D3hot D3cold
  201. [ 59.827956] pci 0000:01:07.0: [1fff:8010] type 01 class 0x060400
  202. [ 59.827979] pci 0000:01:07.0: reg 0x10: [mem 0x00a00000-0x00a0003f 64bit]
  203. [ 59.828013] pci_msi_setup_pci_dev 0000:01:07.0: msix_cap = 0
  204. [ 59.828036] pci 0000:01:07.0: supports D1
  205. [ 59.828042] pci 0000:01:07.0: PME# supported from D0 D1 D3hot D3cold
  206. [ 59.828198] pci 0000:01:08.0: [1fff:8011] type 01 class 0x060400
  207. [ 59.828221] pci 0000:01:08.0: reg 0x10: [mem 0x00b00000-0x00b0003f 64bit]
  208. [ 59.828254] pci_msi_setup_pci_dev 0000:01:08.0: msix_cap = 0
  209. [ 59.828277] pci 0000:01:08.0: supports D1
  210. [ 59.828282] pci 0000:01:08.0: PME# supported from D0 D1 D3hot D3cold
  211. [ 59.828427] pci 0000:01:09.0: [1fff:8011] type 01 class 0x060400
  212. [ 59.828450] pci 0000:01:09.0: reg 0x10: [mem 0x00c00000-0x00c0003f 64bit]
  213. [ 59.828483] pci_msi_setup_pci_dev 0000:01:09.0: msix_cap = 0
  214. [ 59.828506] pci 0000:01:09.0: supports D1
  215. [ 59.828511] pci 0000:01:09.0: PME# supported from D0 D1 D3hot D3cold
  216. [ 59.828652] pci 0000:01:0a.0: [1fff:8008] type 00 class 0x0c0310
  217. [ 59.828670] pci 0000:01:0a.0: reg 0x10: [mem 0x00d00000-0x00d00fff]
  218. [ 59.828720] pci_msi_setup_pci_dev 0000:01:0a.0: msix_cap = 0
  219. [ 59.828868] pci 0000:01:0a.1: [1fff:801e] type 00 class 0x0c0320
  220. [ 59.828886] pci 0000:01:0a.1: reg 0x10: [mem 0x00d01000-0x00d010ff]
  221. [ 59.828937] pci_msi_setup_pci_dev 0000:01:0a.1: msix_cap = 0
  222. [ 59.829087] pci 0000:01:0b.0: [1fff:8008] type 00 class 0x0c0310
  223. [ 59.829106] pci 0000:01:0b.0: reg 0x10: [mem 0x00d02000-0x00d02fff]
  224. [ 59.829156] pci_msi_setup_pci_dev 0000:01:0b.0: msix_cap = 0
  225. [ 59.829296] pci 0000:01:0b.1: [1fff:801e] type 00 class 0x0c0320
  226. [ 59.829315] pci 0000:01:0b.1: reg 0x10: [mem 0x00d03000-0x00d030ff]
  227. [ 59.829365] pci_msi_setup_pci_dev 0000:01:0b.1: msix_cap = 0
  228. [ 59.829528] pci 0000:01:0c.0: [1fff:800e] type 00 class 0x000000
  229. [ 59.829598] pci_msi_setup_pci_dev 0000:01:0c.0: msix_cap = 0
  230. [ 59.829767] pci 0000:00:00.0: PCI bridge to [bus 01-08]
  231. [ 59.829778] pci 0000:00:00.0: bridge window [io 0xff20001000-0xff20001fff]
  232. [ 59.829787] pci 0000:00:00.0: bridge window [mem 0x00200000-0x00dfffff]
  233. [ 59.829797] pci 0000:00:00.0: bridge window [mem 0x10000000-0x300fffff 64bit pref]
  234. [ 59.829947] pci 0000:01:00.0: PCI bridge to [bus 02]
  235. [ 59.830089] pci 0000:03:00.0: [126f:0768] type 00 class 0x030000
  236. [ 59.830118] pci 0000:03:00.0: reg 0x10: [mem 0x20000000-0x2fffffff pref]
  237. [ 59.830137] pci 0000:03:00.0: reg 0x14: [mem 0x00600000-0x007fffff]
  238. [ 59.830198] pci 0000:03:00.0: reg 0x30: [mem 0x30000000-0x3000ffff pref]
  239. [ 59.830237] pci_msi_setup_pci_dev 0000:03:00.0: msix_cap = 0
  240. [ 59.830276] pci 0000:03:00.0: supports D1
  241. [ 59.830282] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
  242. [ 59.830412] vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=none,locks=none
  243. [ 59.830448] pci 0000:01:04.0: PCI bridge to [bus 03]
  244. [ 59.830458] pci 0000:01:04.0: bridge window [mem 0x00500000-0x007fffff]
  245. [ 59.830469] pci 0000:01:04.0: bridge window [mem 0x10100000-0x300fffff 64bit pref]
  246. [ 59.830577] pci 0000:01:05.0: PCI bridge to [bus 04]
  247. [ 59.830693] pci 0000:01:06.0: PCI bridge to [bus 05]
  248. [ 59.830807] pci 0000:01:07.0: PCI bridge to [bus 06]
  249. [ 59.830961] pci 0000:01:08.0: PCI bridge to [bus 07]
  250. [ 59.831086] pci 0000:01:09.0: PCI bridge to [bus 08]
  251. [ 59.831862] PCI->APIC IRQ transform: (D0, B1,S0,F0, P0) -> 16
  252. [ 59.831918] PCI->APIC IRQ transform: (D0, B1,S4,F0, P0) -> 16
  253. [ 59.831927] PCI->APIC IRQ transform: (D0, B1,S5,F0, P0) -> 17
  254. [ 59.831936] PCI->APIC IRQ transform: (D0, B1,S6,F0, P0) -> 18
  255. [ 59.831945] PCI->APIC IRQ transform: (D0, B1,S7,F0, P0) -> 19
  256. [ 59.831953] PCI->APIC IRQ transform: (D0, B1,S8,F0, P0) -> 16
  257. [ 59.831963] PCI->APIC IRQ transform: (D0, B1,S9,F0, P0) -> 17
  258. [ 59.831998] PCI->APIC IRQ transform: (D0, B3,S0,F0, P0) -> 16
  259. [ 59.832029] MSI window 0x300000 + 0x100000. Reserved
  260. [ 59.832202] pci 0000:01:00.0: PCI bridge to [bus 02]
  261. [ 59.832232] pci 0000:03:00.0: BAR 6: assigned [mem 0x00500000-0x0050ffff pref]
  262. [ 59.832241] pci 0000:01:04.0: PCI bridge to [bus 03]
  263. [ 59.832250] pci 0000:01:04.0: bridge window [mem 0x00500000-0x007fffff]
  264. [ 59.832259] pci 0000:01:04.0: bridge window [mem 0x10100000-0x300fffff 64bit pref]
  265. [ 59.832270] pci 0000:01:05.0: PCI bridge to [bus 04]
  266. [ 59.832285] pci 0000:01:06.0: PCI bridge to [bus 05]
  267. [ 59.832301] pci 0000:01:07.0: PCI bridge to [bus 06]
  268. [ 59.832316] pci 0000:01:08.0: PCI bridge to [bus 07]
  269. [ 59.832331] pci 0000:01:09.0: PCI bridge to [bus 08]
  270. [ 59.832346] pci 0000:00:00.0: PCI bridge to [bus 01-08]
  271. [ 59.832354] pci 0000:00:00.0: bridge window [io 0xff20001000-0xff20001fff]
  272. [ 59.832363] pci 0000:00:00.0: bridge window [mem 0x00200000-0x00dfffff]
  273. [ 59.832372] pci 0000:00:00.0: bridge window [mem 0x10000000-0x300fffff 64bit pref]
  274. [ 59.832383] pci_bus 0000:00: resource 4 [io 0xff20000000-0xffffffffffffffff]
  275. [ 59.832390] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffffffffffff]
  276. [ 59.832397] pci_bus 0000:01: resource 0 [io 0xff20001000-0xff20001fff]
  277. [ 59.832403] pci_bus 0000:01: resource 1 [mem 0x00200000-0x00dfffff]
  278. [ 59.832410] pci_bus 0000:01: resource 2 [mem 0x10000000-0x300fffff 64bit pref]
  279. [ 59.832418] pci_bus 0000:03: resource 1 [mem 0x00500000-0x007fffff]
  280. [ 59.832425] pci_bus 0000:03: resource 2 [mem 0x10100000-0x300fffff 64bit pref]
  281. [ 59.833370] NetLabel: Initializing
  282. [ 59.833390] NetLabel: domain hash size = 128
  283. [ 59.833408] NetLabel: protocols = UNLABELED CIPSOv4
  284. [ 59.833492] NetLabel: unlabeled traffic allowed by default
  285. [ 59.833558] iommu:0:0: enabled; window size 2048 MiB
  286. [ 59.833984] clocksource: Switched to clocksource lt
  287. [ 59.865891] VFS: Disk quotas dquot_6.6.0
  288. [ 59.865995] VFS: Dquot-cache hash table entries: 1024 (order 0, 8192 bytes)
  289. [ 59.866205] FS-Cache: Loaded
  290. [ 59.874549] NET: Registered protocol family 2
  291. [ 59.875405] TCP established hash table entries: 131072 (order: 7, 1048576 bytes)
  292. [ 59.876568] TCP bind hash table entries: 65536 (order: 7, 1048576 bytes)
  293. [ 59.877339] TCP: Hash tables configured (established 131072 bind 65536)
  294. [ 59.877559] UDP hash table entries: 8192 (order: 5, 262144 bytes)
  295. [ 59.877846] UDP-Lite hash table entries: 8192 (order: 5, 262144 bytes)
  296. [ 59.878370] NET: Registered protocol family 1
  297. [ 59.878876] RPC: Registered named UNIX socket transport module.
  298. [ 59.878900] RPC: Registered udp transport module.
  299. [ 59.878919] RPC: Registered tcp transport module.
  300. [ 59.878939] RPC: Registered tcp NFSv4.1 backchannel transport module.
  301. [ 59.878961] PCI: CLS 4 bytes
  302. [ 59.879063] PCI: Setting latency timer of device 0000:00:00.0 to 64
  303. [ 60.014403] Trying to unpack rootfs image as initramfs...
  304. [ 60.037684] Freeing initrd memory: 456K
  305. [ 60.038683] hwmon pmcmon: node 0 hwmon device enabled - pmcmon
  306. [ 60.038760] pci 0000:01:02.4: allocated PCI BAR #0: base 0x408000
  307. [ 60.040172] pci 0000:01:02.4: l-gpio: L-GPIO support successfully loaded.
  308. [ 60.040524] i2c_spi 0000:01:02.1: probed
  309. [ 60.040677] l_i2c l_i2c.0: I2C adapter 0 registered
  310. [ 60.040771] l_i2c l_i2c.0: I2C adapter 1 registered
  311. [ 60.040862] l_i2c l_i2c.0: I2C adapter 2 registered
  312. [ 60.040957] l_i2c l_i2c.0: I2C adapter 3 registered
  313. [ 60.041222] l_spi l_spi.0: master is unqueued, this is deprecated
  314. [ 60.041249] l_spi l_spi.0: probed
  315. [ 60.041730] pci 0000:01:0c.0: acpi-spmc: ACPI-SPMC support successfully loaded.
  316. [ 60.042596] audit: initializing netlink subsys (disabled)
  317. [ 60.042684] audit: type=2000 audit(1.680:1): initialized
  318. [ 60.043849] workingset: timestamp_bits=44 max_order=21 bucket_order=0
  319. [ 60.060838] MCBC: Memory shredding disabled.
  320. [ 60.064444] Key type asymmetric registered
  321. [ 60.064469] Asymmetric key parser 'x509' registered
  322. [ 60.064708] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
  323. [ 60.064895] io scheduler noop registered
  324. [ 60.064917] io scheduler deadline registered
  325. [ 60.065116] io scheduler cfq registered (default)
  326. [ 60.065893] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
  327. [ 60.071196] Serial: 85c30 driver $ 2 ports, IRQ sharing enabled
  328. [ 60.071293] 0000:01:02.2: ttyS0 at MMIO 0x401040 (irq = 3, base_baud = 153600) is a Z85c30 ESCC - Serial port
  329. [ 60.071517] 0000:01:02.2: ttyS1 at MMIO 0x401042 (irq = 3, base_baud = 153600) is a Z85c30 ESCC - Serial port
  330. [ 60.071732] serial_zilog_probe: register IRQ #3 and set interrupt handler.
  331. [ 60.083238] brd: module loaded
  332. [ 60.083275] Uniform Multi-Platform E-IDE driver
  333. [ 60.083442] ELBRUS 0000:01:02.0: IDE controller (0x1fff:0x800b rev 0x00)
  334. [ 60.083509] 0000:01:02.0: Unmask interrupts
  335. [ 60.083533] ELBRUS 0000:01:02.0: 100% native mode on irq 11
  336. [ 60.083562] ide0: BM-DMA at 0xff20001020-0xff20001027
  337. [ 60.083604] ide1: BM-DMA at 0xff20001028-0xff2000102f
  338. [ 60.083642] Probing IDE interface ide0...
  339. [ 60.444210] hda: 64GB ATA Flash Drive, ATA DISK drive
  340. [ 60.864002] hdb: 64GB ATA Flash Drive, ATA DISK drive
  341. [ 60.864137] hda: host max PIO4 wanted PIO255(auto-tune) selected PIO4
  342. [ 60.864384] hda: UDMA/100 mode selected
  343. [ 60.864528] hdb: host max PIO4 wanted PIO255(auto-tune) selected PIO4
  344. [ 60.864643] hdb: UDMA/100 mode selected
  345. [ 60.864778] Probing IDE interface ide1...
  346. [ 61.564108] ide0 at 0xff20001000-0xff20001007,0xff2000100a on irq 11
  347. [ 61.564858] ide1 at 0xff20001010-0xff20001017,0xff2000101a on irq 11
  348. [ 61.565368] ide-gd driver 1.18
  349. [ 61.565462] hda: max request size: 1024KiB
  350. [ 61.604286] hda: 125045424 sectors (64023 MB) w/1KiB Cache, CHS=16383/255/63
  351. [ 61.605321] hda: hda1 hda2 hda3 hda4
  352. [ 61.606371] hdb: max request size: 1024KiB
  353. [ 61.606396] hdb: 125045424 sectors (64023 MB) w/1KiB Cache, CHS=16383/255/63
  354. [ 61.644501] hdb: hdb1 hdb2 hdb3 hdb4
  355. [ 61.645428] ide-cd driver 5.00
  356. [ 61.646119] ahci 0000:01:03.0: version 3.0
  357. [ 61.646137] PCI: Enabling device 0000:01:03.0 (0006 -> 0007)
  358. [ 61.646271] ahci 0000:01:03.0: SSS flag set, parallel bus scan disabled
  359. [ 61.646335] ahci 0000:01:03.0: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
  360. [ 61.646374] ahci 0000:01:03.0: flags: sntf stag pm led pio slum part ccc apst
  361. [ 61.648484] scsi host0: ahci
  362. [ 61.649008] scsi host1: ahci
  363. [ 61.649449] scsi host2: ahci
  364. [ 61.649929] scsi host3: ahci
  365. [ 61.650163] ata1: SATA max UDMA/133 abar m8192@0x40a000 port 0x40a100 irq 20
  366. [ 61.650189] ata2: SATA max UDMA/133 abar m8192@0x40a000 port 0x40a180 irq 20
  367. [ 61.650214] ata3: SATA max UDMA/133 abar m8192@0x40a000 port 0x40a200 irq 20
  368. [ 61.650238] ata4: SATA max UDMA/133 abar m8192@0x40a000 port 0x40a280 irq 20
  369. [ 61.650328] PCI: Enabling device 0000:01:03.1 (0006 -> 0007)
  370. [ 61.650444] ahci 0000:01:03.1: SSS flag set, parallel bus scan disabled
  371. [ 61.650505] ahci 0000:01:03.1: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode
  372. [ 61.650544] ahci 0000:01:03.1: flags: sntf stag pm led pio slum part ccc apst
  373. [ 61.652696] scsi host4: ahci
  374. [ 61.653687] scsi host5: ahci
  375. [ 61.654160] scsi host6: ahci
  376. [ 61.654610] scsi host7: ahci
  377. [ 61.654877] ata5: SATA max UDMA/133 abar m8192@0x40c000 port 0x40c100 irq 21
  378. [ 61.654903] ata6: SATA max UDMA/133 abar m8192@0x40c000 port 0x40c180 irq 21
  379. [ 61.654928] ata7: SATA max UDMA/133 abar m8192@0x40c000 port 0x40c200 irq 21
  380. [ 61.654953] ata8: SATA max UDMA/133 abar m8192@0x40c000 port 0x40c280 irq 21
  381. [ 61.655573] libphy: Fixed MDIO Bus: probed
  382. [ 61.656683] l_e1000: l_e1000_nort.c: v2.00 20.02.2020 [email protected], [email protected]
  383. [ 61.656756] l_e1000 0000:01:01.0: initializing PCI device 1fff:8016
  384. [ 61.656797] PCI: Setting latency timer of device 0000:01:01.0 to 64
  385. [ 61.657518] pps pps0: new PPS source ptp0
  386. [ 61.665217] libphy: l_e1000 mdio: probed
  387. [ 61.665322] l_e1000 0000:01:01.0: phy in COPPER mode
  388. [ 61.765149] l_e1000 0000:01:01.0: found phy id 0x01410CC2 - Marvell 88E1111
  389. [ 61.765178] l_e1000 0000:01:01.0: register mdiobus l_e1000-108 with phy l_e1000-108:01
  390. [ 61.765222] l_e1000 0000:01:01.0: registered as l_e1000 (rev. 0)
  391. [ 61.765273] l_e1000 0000:01:01.1: initializing PCI device 1fff:8016
  392. [ 61.765313] PCI: Setting latency timer of device 0000:01:01.1 to 64
  393. [ 61.765951] pps pps1: new PPS source ptp1
  394. [ 61.766111] Save MAC[5]:01 for device 0000:01:01.1
  395. [ 61.773206] libphy: l_e1000 mdio: probed
  396. [ 61.773307] l_e1000 0000:01:01.1: phy in COPPER mode
  397. [ 61.865150] l_e1000 0000:01:01.1: found phy id 0x01410CC2 - Marvell 88E1111
  398. [ 61.865177] l_e1000 0000:01:01.1: register mdiobus l_e1000-109 with phy l_e1000-109:01
  399. [ 61.865216] l_e1000 0000:01:01.1: registered as l_e1000 (rev. 0)
  400. [ 61.865263] l_e1000 0000:01:01.2: initializing PCI device 1fff:8016
  401. [ 61.865298] PCI: Setting latency timer of device 0000:01:01.2 to 64
  402. [ 61.865898] pps pps2: new PPS source ptp2
  403. [ 61.866060] Save MAC[5]:02 for device 0000:01:01.2
  404. [ 61.873109] libphy: l_e1000 mdio: probed
  405. [ 61.873208] l_e1000 0000:01:01.2: phy in FIBER mode
  406. [ 61.965159] l_e1000 0000:01:01.2: found phy id 0x01410CC2 - Marvell 88E1111
  407. [ 61.965186] l_e1000 0000:01:01.2: register mdiobus l_e1000-10a with phy l_e1000-10a:01
  408. [ 61.965224] l_e1000 0000:01:01.2: registered as l_e1000 (rev. 0)
  409. [ 61.965361] sky2: driver version 1.30
  410. [ 61.965675] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  411. [ 61.965701] ehci_hcd: block sizes: qh 144 qtd 96 itd 192 sitd 96
  412. [ 61.965705] ehci-pci: EHCI PCI platform driver
  413. [ 61.965854] ehci-pci 0000:01:0a.1: EHCI Host Controller
  414. [ 61.966095] ehci-pci 0000:01:0a.1: new USB bus registered, assigned bus number 1
  415. [ 61.966198] ehci-pci 0000:01:0a.1: park 0
  416. [ 61.966214] ehci-pci 0000:01:0a.1: Enabling legacy PCI PM
  417. [ 61.966243] ehci-pci 0000:01:0a.1: cache line size of 4 is not supported
  418. [ 61.966278] ehci-pci 0000:01:0a.1: irq 12, io mem 0x00d01000
  419. [ 61.975543] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 330)
  420. [ 61.976541] ata1.00: ATA-9: TS128GMTS400I, P1225CH1, max UDMA/133
  421. [ 61.976575] ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 0/32)
  422. [ 61.977271] ata1.00: configured for UDMA/133
  423. [ 61.978004] scsi 0:0:0:0: Direct-Access ATA TS128GMTS400I 5CH1 PQ: 0 ANSI: 5
  424. [ 61.985499] ata5: SATA link down (SStatus 0 SControl 330)
  425. [ 61.994015] ehci-pci 0000:01:0a.1: USB 2.0 started, EHCI 1.00
  426. [ 61.994379] usb usb1: udev 1, busnum 1, minor = 0
  427. [ 61.994388] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  428. [ 61.994415] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  429. [ 61.994447] usb usb1: Product: EHCI Host Controller
  430. [ 61.994470] usb usb1: Manufacturer: Linux 4.9.224-5.9.vniins2.sparc64-e90s ehci_hcd
  431. [ 61.994502] usb usb1: SerialNumber: 0000:01:0a.1
  432. [ 61.995026] hub 1-0:1.0: USB hub found
  433. [ 61.995092] hub 1-0:1.0: 4 ports detected
  434. [ 61.995117] hub 1-0:1.0: standalone hub
  435. [ 61.995122] hub 1-0:1.0: no power switching (usb 1.0)
  436. [ 61.995128] hub 1-0:1.0: individual port over-current protection
  437. [ 61.995134] hub 1-0:1.0: power on to power good time: 20ms
  438. [ 61.995217] hub 1-0:1.0: local power source is good
  439. [ 61.995364] hub 1-0:1.0: trying to enable port power on non-switchable hub
  440. [ 61.995755] ehci-pci 0000:01:0b.1: EHCI Host Controller
  441. [ 61.995953] ehci-pci 0000:01:0b.1: new USB bus registered, assigned bus number 2
  442. [ 61.996048] ehci-pci 0000:01:0b.1: park 0
  443. [ 61.996061] ehci-pci 0000:01:0b.1: Enabling legacy PCI PM
  444. [ 61.996090] ehci-pci 0000:01:0b.1: cache line size of 4 is not supported
  445. [ 61.996118] ehci-pci 0000:01:0b.1: irq 13, io mem 0x00d03000
  446. [ 62.024007] ehci-pci 0000:01:0b.1: USB 2.0 started, EHCI 1.00
  447. [ 62.024321] usb usb2: udev 1, busnum 2, minor = 128
  448. [ 62.024328] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  449. [ 62.024356] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  450. [ 62.024387] usb usb2: Product: EHCI Host Controller
  451. [ 62.024410] usb usb2: Manufacturer: Linux 4.9.224-5.9.vniins2.sparc64-e90s ehci_hcd
  452. [ 62.024441] usb usb2: SerialNumber: 0000:01:0b.1
  453. [ 62.024934] hub 2-0:1.0: USB hub found
  454. [ 62.025009] hub 2-0:1.0: 4 ports detected
  455. [ 62.025034] hub 2-0:1.0: standalone hub
  456. [ 62.025040] hub 2-0:1.0: no power switching (usb 1.0)
  457. [ 62.025045] hub 2-0:1.0: individual port over-current protection
  458. [ 62.025052] hub 2-0:1.0: power on to power good time: 20ms
  459. [ 62.025135] hub 2-0:1.0: local power source is good
  460. [ 62.025239] hub 2-0:1.0: trying to enable port power on non-switchable hub
  461. [ 62.025618] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  462. [ 62.025643] ohci_hcd: block sizes: ed 112 td 96
  463. [ 62.025683] ohci-pci: OHCI PCI platform driver
  464. [ 62.025778] ohci-pci 0000:01:0a.0: OHCI PCI host controller
  465. [ 62.025992] ohci-pci 0000:01:0a.0: new USB bus registered, assigned bus number 3
  466. [ 62.026084] ohci-pci 0000:01:0a.0: created debug files
  467. [ 62.026111] ohci-pci 0000:01:0a.0: irq 12, io mem 0x00d00000
  468. [ 62.094034] ohci-pci 0000:01:0a.0: OHCI controller state
  469. [ 62.094043] ohci-pci 0000:01:0a.0: OHCI 1.0, NO legacy support registers, rh state running
  470. [ 62.094048] ohci-pci 0000:01:0a.0: rhsc
  471. [ 62.094057] ohci-pci 0000:01:0a.0: control 0x083 HCFS=operational CBSR=3
  472. [ 62.094065] ohci-pci 0000:01:0a.0: cmdstatus 0x00000 SOC=0
  473. [ 62.094074] ohci-pci 0000:01:0a.0: intrstatus 0x00000004 SF
  474. [ 62.094083] ohci-pci 0000:01:0a.0: intrenable 0x8000005a MIE RHSC UE RD WDH
  475. [ 62.094092] ohci-pci 0000:01:0a.0: hcca frame #0000
  476. [ 62.094102] ohci-pci 0000:01:0a.0: roothub.a 00000204 POTPGT=0 NPS NDP=4(4)
  477. [ 62.094109] ohci-pci 0000:01:0a.0: roothub.b 00000000 PPCM=0000 DR=0000
  478. [ 62.094117] ohci-pci 0000:01:0a.0: roothub.status 00008000 DRWE
  479. [ 62.094127] ohci-pci 0000:01:0a.0: roothub.portstatus [0] 0x00000100 PPS
  480. [ 62.094136] ohci-pci 0000:01:0a.0: roothub.portstatus [1] 0x00000100 PPS
  481. [ 62.094145] ohci-pci 0000:01:0a.0: roothub.portstatus [2] 0x00000100 PPS
  482. [ 62.094153] ohci-pci 0000:01:0a.0: roothub.portstatus [3] 0x00000100 PPS
  483. [ 62.094430] usb usb3: udev 1, busnum 3, minor = 256
  484. [ 62.094439] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
  485. [ 62.094467] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  486. [ 62.094499] usb usb3: Product: OHCI PCI host controller
  487. [ 62.094522] usb usb3: Manufacturer: Linux 4.9.224-5.9.vniins2.sparc64-e90s ohci_hcd
  488. [ 62.094553] usb usb3: SerialNumber: 0000:01:0a.0
  489. [ 62.095054] hub 3-0:1.0: USB hub found
  490. [ 62.095124] hub 3-0:1.0: 4 ports detected
  491. [ 62.095156] hub 3-0:1.0: standalone hub
  492. [ 62.095162] hub 3-0:1.0: no power switching (usb 1.0)
  493. [ 62.095167] hub 3-0:1.0: global over-current protection
  494. [ 62.095173] hub 3-0:1.0: power on to power good time: 0ms
  495. [ 62.095246] hub 3-0:1.0: local power source is good
  496. [ 62.095252] hub 3-0:1.0: no over-current condition exists
  497. [ 62.095355] hub 3-0:1.0: trying to enable port power on non-switchable hub
  498. [ 62.095708] ohci-pci 0000:01:0b.0: OHCI PCI host controller
  499. [ 62.095908] ohci-pci 0000:01:0b.0: new USB bus registered, assigned bus number 4
  500. [ 62.095997] ohci-pci 0000:01:0b.0: created debug files
  501. [ 62.096017] ohci-pci 0000:01:0b.0: irq 13, io mem 0x00d02000
  502. [ 62.104068] usb usb1-port2: status 0501 change 0001
  503. [ 62.134142] hub 2-0:1.0: state 7 ports 4 chg 0000 evt 0000
  504. [ 62.164026] ohci-pci 0000:01:0b.0: rhsc
  505. [ 62.164041] ohci-pci 0000:01:0b.0: OHCI controller state
  506. [ 62.164050] ohci-pci 0000:01:0b.0: OHCI 1.0, NO legacy support registers, rh state running
  507. [ 62.164059] ohci-pci 0000:01:0b.0: control 0x083 HCFS=operational CBSR=3
  508. [ 62.164067] ohci-pci 0000:01:0b.0: cmdstatus 0x00000 SOC=0
  509. [ 62.164075] ohci-pci 0000:01:0b.0: intrstatus 0x00000000
  510. [ 62.164084] ohci-pci 0000:01:0b.0: intrenable 0x8000005a MIE RHSC UE RD WDH
  511. [ 62.164094] ohci-pci 0000:01:0b.0: hcca frame #0000
  512. [ 62.164103] ohci-pci 0000:01:0b.0: roothub.a 00000204 POTPGT=0 NPS NDP=4(4)
  513. [ 62.164111] ohci-pci 0000:01:0b.0: roothub.b 00000000 PPCM=0000 DR=0000
  514. [ 62.164119] ohci-pci 0000:01:0b.0: roothub.status 00008000 DRWE
  515. [ 62.164129] ohci-pci 0000:01:0b.0: roothub.portstatus [0] 0x00000100 PPS
  516. [ 62.164138] ohci-pci 0000:01:0b.0: roothub.portstatus [1] 0x00000100 PPS
  517. [ 62.164146] ohci-pci 0000:01:0b.0: roothub.portstatus [2] 0x00000100 PPS
  518. [ 62.164155] ohci-pci 0000:01:0b.0: roothub.portstatus [3] 0x00000100 PPS
  519. [ 62.164427] usb usb4: udev 1, busnum 4, minor = 384
  520. [ 62.164435] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
  521. [ 62.164468] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  522. [ 62.164500] usb usb4: Product: OHCI PCI host controller
  523. [ 62.164523] usb usb4: Manufacturer: Linux 4.9.224-5.9.vniins2.sparc64-e90s ohci_hcd
  524. [ 62.164554] usb usb4: SerialNumber: 0000:01:0b.0
  525. [ 62.165057] hub 4-0:1.0: USB hub found
  526. [ 62.165124] hub 4-0:1.0: 4 ports detected
  527. [ 62.165148] hub 4-0:1.0: standalone hub
  528. [ 62.165153] hub 4-0:1.0: no power switching (usb 1.0)
  529. [ 62.165158] hub 4-0:1.0: global over-current protection
  530. [ 62.165164] hub 4-0:1.0: power on to power good time: 0ms
  531. [ 62.165237] hub 4-0:1.0: local power source is good
  532. [ 62.165243] hub 4-0:1.0: no over-current condition exists
  533. [ 62.165348] hub 4-0:1.0: trying to enable port power on non-switchable hub
  534. [ 62.165843] usbcore: registered new interface driver usb-storage
  535. [ 62.166142] mousedev: PS/2 mouse device common for all mice
  536. [ 62.166791] rtc-cy14b101p spi0.1: rtc core: registered cy14b101p as rtc0
  537. [ 62.166986] RTC is used for clocksource. Alarm functionality is disabled
  538. [ 62.167139] wd:
  539. [ 62.167149] set I2C-SPI watchdog timer
  540. [ 62.167530] hidraw: raw HID events driver (C) Jiri Kosina
  541. [ 62.167793] usbcore: registered new interface driver usbhid
  542. [ 62.167815] usbhid: USB HID core driver
  543. [ 62.168095] NET: Registered protocol family 17
  544. [ 62.168158] Key type dns_resolver registered
  545. [ 62.169104] registered taskstats version 1
  546. [ 62.172395] Key type big_key registered
  547. [ 62.175616] Key type encrypted registered
  548. [ 62.176378] swapper/0/-1: settimeofday old=3 s 822405000 ns new=1655597974 s 500000000 ns delta=1655597971 s -322405000 ns
  549. [ 62.176457] rtc-cy14b101p spi0.1: setting system clock to 2022-06-19 00:19:34 UTC (1655597974)
  550. [ 62.204147] hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0000
  551. [ 62.214011] hub 1-0:1.0: state 7 ports 4 chg 0004 evt 0000
  552. [ 62.214068] usb usb1-port2: status 0501, change 0000, 480 Mb/s
  553. [ 62.214095] ehci-pci 0000:01:0a.1: port 2 low speed --> companion
  554. [ 62.214118] ohci-pci 0000:01:0a.0: rhsc
  555. [ 62.214197] hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0004
  556. [ 62.214214] ohci-pci 0000:01:0a.0: GetStatus roothub.portstatus [1] = 0x00010301 CSC LSDA PPS CCS
  557. [ 62.214277] usb usb3-port2: status 0301, change 0001, 1.5 Mb/s
  558. [ 62.214589] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
  559. [ 62.215144] sd 0:0:0:0: [sda] Write Protect is off
  560. [ 62.215180] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  561. [ 62.215324] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  562. [ 62.217759] sda: sda1 sda2 sda3
  563. [ 62.219503] sd 0:0:0:0: [sda] Attached SCSI disk
  564. [ 62.284038] usb usb1-port2: not reset yet, waiting 50ms
  565. [ 62.284157] hub 4-0:1.0: state 7 ports 4 chg 0000 evt 0000
  566. [ 62.354025] usb usb1-port2: not reset yet, waiting 200ms
  567. [ 62.414028] usb usb3-port2: debounce total 100ms stable 100ms status 0x301
  568. [ 62.414060] ohci-pci 0000:01:0a.0: rhsc
  569. [ 62.424057] ohci-pci 0000:01:0a.0: rhsc
  570. [ 62.544016] ohci-pci 0000:01:0a.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
  571. [ 62.545588] ata2: SATA link down (SStatus 0 SControl 330)
  572. [ 62.574040] usb usb1-port2: not reset yet, waiting 200ms
  573. [ 62.614011] usb 3-2: new low-speed USB device number 2 using ohci-pci
  574. [ 62.654012] ohci-pci 0000:01:0a.0: rhsc
  575. [ 62.744015] ohci-pci 0000:01:0a.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS
  576. [ 62.794039] usb usb1-port2: not reset yet, waiting 200ms
  577. [ 62.875595] ata3: SATA link down (SStatus 0 SControl 330)
  578. [ 62.881095] usb 3-2: udev 2, busnum 3, minor = 257
  579. [ 62.881103] usb 3-2: New USB device found, idVendor=046d, idProduct=c31c
  580. [ 62.881138] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  581. [ 62.881163] usb 3-2: Product: USB Keyboard
  582. [ 62.881184] usb 3-2: Manufacturer: Logitech
  583. [ 62.898202] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:00.0/0000:01:0a.0/usb3/3-2/3-2:1.0/0003:046D:C31C.0001/input/input0
  584. [ 62.898266] ohci-pci 0000:01:0a.0: link ed fffff8046b286070 branch 0 [117us.], interval 8
  585. [ 62.964162] hid-generic 0003:046D:C31C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:01:0a.0-2/input0
  586. [ 62.980278] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:00.0/0000:01:0a.0/usb3/3-2/3-2:1.1/0003:046D:C31C.0002/input/input1
  587. [ 62.980332] ohci-pci 0000:01:0a.0: link ed fffff8046b2860e0 branch 1 [92us.], interval 32
  588. [ 63.014042] usb usb1-port2: not reset yet, waiting 200ms
  589. [ 63.014155] hub 1-0:1.0: state 7 ports 4 chg 0000 evt 0004
  590. [ 63.014220] usb usb1-port2: status 0100, change 0001, 12 Mb/s
  591. [ 63.044150] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:01:0a.0-2/input1
  592. [ 63.044313] hub 3-0:1.0: state 7 ports 4 chg 0000 evt 0004
  593. [ 63.205524] ata4: SATA link down (SStatus 0 SControl 330)
  594. [ 63.214035] usb usb1-port2: debounce total 100ms stable 100ms status 0x100
  595. [ 63.535634] ata6: SATA link down (SStatus 0 SControl 330)
  596. [ 63.865601] ata7: SATA link down (SStatus 0 SControl 330)
  597. [ 64.195610] ata8: SATA link down (SStatus 0 SControl 330)
  598. [ 64.196029] This architecture does not have kernel memory protection.
  599. [ 64.197069] audit: type=2080 audit(1655597976.510:2): <flags=1,exe="/bin/nash",ppid=0,pid=1,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> mount(path="/proc",path="/proc","proc",c0ed0000) = 0 (Success)
  600. [ 64.197904] audit: type=2080 audit(1655597976.510:3): <flags=1,exe="/bin/nash",ppid=0,pid=1,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> mount(path="/sys",path="/sys","sysfs",c0ed0000) = 0 (Success)
  601. [ 64.198338] audit: type=2080 audit(1655597976.510:4): <flags=1,exe="/bin/nash",ppid=0,pid=1,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> mount(path="/dev",path="/dev","tmpfs",c0ed0000) = 0 (Success)
  602. [ 64.285561] EXT4-fs (sda2): mounting ext3 file system using the ext4 subsystem
  603. [ 64.296724] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts:
  604. [ 64.296865] audit: type=2080 audit(1655597976.610:5): <flags=1,exe="/bin/nash",ppid=0,pid=1,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> mount(path="/dev/root",path="/sysroot","ext3",c0ed0001) = 0 (Success)
  605. [ 64.299536] audit: type=2080 audit(1655597976.610:6): <flags=1,exe="/bin/nash",ppid=0,pid=1,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> mount(path="/dev",path="/sysroot/dev",[null],1000) = 0 (Success)
  606. [ 64.303552] audit: type=2080 audit(1655597976.610:7): <flags=1,exe="/bin/nash",ppid=0,pid=1,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> mount(path="/proc",path="/sysroot/proc","proc",0) = 0 (Success)
  607. [ 64.305806] audit: type=2080 audit(1655597976.620:8): <flags=1,exe="/bin/nash",ppid=0,pid=1,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> mount(path="/sys",path="/sysroot/sys","sysfs",0) = 0 (Success)
  608. [ 64.414042] audit: type=2080 audit(1655597976.730:9): <flags=1,exe="/bin/nash",ppid=0,pid=1,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> umount(path="/dev",2) = 0 (Success)
  609. [ 64.494044] audit: type=2080 audit(1655597976.810:10): <flags=1,exe="/bin/nash",ppid=0,pid=1,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> umount(path="/proc",2) = 0 (Success)
  610. [ 64.587061] random: fast init done
  611. [ 65.234043] clk_rt clocksource registation at cpu 4 clk_rt=62.724412698 sec, getnstod =1655597977.557642500 div=99997347 Hz
  612. [ 67.884606] audit_printk_skb: 9 callbacks suppressed
  613. [ 67.884613] audit: type=2080 audit(1655597980.200:14): <flags=2,exe="/bin/mount",ppid=920,pid=942,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=tty1,ses=0> mount(path="/proc/bus/usb",path="/proc/bus/usb","usbfs",c0ed0000) = -2 (Failure)
  614. [ 67.972547] warning: process `kmodule' used the deprecated sysctl system call with
  615. [ 67.972558] 1.
  616. [ 67.972561] 23.
  617. [ 67.972564]
  618. [ 68.274041] clocksource: clk_rt: mask: 0xfffffffffff max_cycles: 0xe6a175af17b, max_idle_ns: 7052728136059 ns
  619. [ 68.274122] clocksource: Switched to clocksource clk_rt
  620. [ 68.748409] audit: type=2080 audit(1655597981.057:15): <flags=1,exe="/sbin/modprobe",ppid=920,pid=950,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=tty1,ses=0> init_module("led_class","") = 0 (Success)
  621. [ 68.751028] sdhci: Secure Digital Host Controller Interface driver
  622. [ 68.751031] sdhci: Copyright(c) Pierre Ossman
  623. [ 68.751066] audit: type=2080 audit(1655597981.057:16): <flags=1,exe="/sbin/modprobe",ppid=920,pid=950,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=tty1,ses=0> init_module("sdhci","") = 0 (Success)
  624. [ 68.753008] audit: type=2080 audit(1655597981.057:17): <flags=1,exe="/sbin/modprobe",ppid=920,pid=950,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=tty1,ses=0> init_module("sdhci_pci","") = 0 (Success)
  625. [ 69.351590] audit: type=2080 audit(1655597981.657:18): <flags=1,exe="/sbin/modprobe",ppid=920,pid=981,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=tty1,ses=0> init_module("soundcore","") = 0 (Success)
  626. [ 69.356033] audit: type=2080 audit(1655597981.667:19): <flags=1,exe="/sbin/modprobe",ppid=920,pid=981,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=tty1,ses=0> init_module("snd","") = 0 (Success)
  627. [ 69.358357] audit: type=2080 audit(1655597981.667:20): <flags=1,exe="/sbin/modprobe",ppid=920,pid=981,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=tty1,ses=0> init_module("snd_timer","") = 0 (Success)
  628. [ 69.402731] audit: type=2080 audit(1655597981.707:21): <flags=1,exe="/sbin/modprobe",ppid=987,pid=988,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=tty1,ses=0> init_module("snd_pcm","") = 0 (Success)
  629. [ 69.430092] audit: type=2080 audit(1655597981.737:22): <flags=1,exe="/sbin/modprobe",ppid=987,pid=990,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=tty1,ses=0> init_module("snd_mixer_oss","") = 0 (Success)
  630. [ 69.516199] snd_hda_intel 0000:01:02.3: Force to snoop mode by module option
  631. [ 69.582942] 0-MPV KPI-2 IDs: DEV=0x8014 VEND=0x1fff REV=0x0 drv.ver.20404 IRQ 0=6 IRQ 1,2=9, BUS =0000:01:02.4, picoseconds per counter clock = 7999
  632. [ 69.630870] [drm] Initialized
  633. [ 69.648330] snd_hda_codec_cirrus hdaudioC0D0: autoconfig for CS4207: line_outs=3 (0x9/0xb/0xa/0x0/0x0) type:line
  634. [ 69.648342] snd_hda_codec_cirrus hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
  635. [ 69.648349] snd_hda_codec_cirrus hdaudioC0D0: hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
  636. [ 69.648355] snd_hda_codec_cirrus hdaudioC0D0: mono: mono_out=0x0
  637. [ 69.648362] snd_hda_codec_cirrus hdaudioC0D0: dig-out=0x10/0x15
  638. [ 69.648367] snd_hda_codec_cirrus hdaudioC0D0: inputs:
  639. [ 69.648374] snd_hda_codec_cirrus hdaudioC0D0: Mic=0xd
  640. [ 69.648381] snd_hda_codec_cirrus hdaudioC0D0: Line=0xc
  641. [ 69.648386] snd_hda_codec_cirrus hdaudioC0D0: dig-in=0x12
  642. [ 69.653237] +-------------SMI Driver Information------------+
  643. [ 69.653242] Release type: Linux DRM Display Driver Release
  644. [ 69.653245] Driver version: v1.2.3.1
  645. [ 69.653247] Support products: SM750, SM768
  646. [ 69.653250] Support OS: All Linux distribution
  647. [ 69.653252] Support ARCH: x64, x86, mips
  648. [ 69.653254] +-----------------------------------------------+
  649. [ 69.653438] PCI: Setting latency timer of device 0000:01:04.0 to 64
  650. [ 69.653860] Found SM768 SOC Chip
  651. [ 69.662291] input: HDA MCST Mic as /devices/pci0000:00/0000:00:00.0/0000:01:02.3/sound/card0/input2
  652. [ 69.662434] input: HDA MCST Line as /devices/pci0000:00/0000:00:00.0/0000:01:02.3/sound/card0/input3
  653. [ 69.662582] input: HDA MCST Line Out Front as /devices/pci0000:00/0000:00:00.0/0000:01:02.3/sound/card0/input4
  654. [ 69.662721] input: HDA MCST Line Out CLFE as /devices/pci0000:00/0000:00:00.0/0000:01:02.3/sound/card0/input5
  655. [ 69.736914] [TTM] Zone kernel: Available graphics memory: 8294628 kiB
  656. [ 69.736919] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
  657. [ 69.736923] [TTM] Initializing pool allocator
  658. [ 69.736977] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  659. [ 69.736981] [drm] No driver support for vblank timestamp query.
  660. [ 69.737597] [drm] No panel or bridge found ...
  661. [ 79.537376] [drm] fb mappable at 0x20000000
  662. [ 79.537380] [drm] vram aper at 0x20000000
  663. [ 79.537383] [drm] size 4153344
  664. [ 79.537386] [drm] fb depth is 16
  665. [ 79.537389] [drm] pitch is 3840
  666. [ 79.537608] fbcon: smidrmfb (fb0) is primary device
  667. [ 81.390621] Console: switching to colour frame buffer device 240x67
  668. [ 81.509024] smifb 0000:03:00.0: fb0: smidrmfb frame buffer device
  669. [ 81.573702] [drm] Initialized smifb 1.2.3 20171031 for 0000:03:00.0 on minor 0
  670. [ 81.573832] audit_printk_skb: 60 callbacks suppressed
  671. [ 81.573838] audit: type=2080 audit(1655597993.887:43): <flags=1,exe="/sbin/modprobe",ppid=920,pid=1028,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=tty1,ses=0> init_module("smifb","") = 0 (Success)
  672. [ 81.746455] audit: type=2080 audit(1655597994.057:44): <flags=1,exe="/bin/mount",ppid=920,pid=1083,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=tty1,ses=0> mount(path="/dev/devpts",path="/dev/pts","devpts",c0ed0000) = 0 (Success)
  673. [ 82.210064] udevd (1109): /proc/1109/oom_adj is deprecated, please use /proc/1109/oom_score_adj instead.
  674. [ 82.477162] l_e1000 0000:01:01.0 eth7: renamed from eth0
  675. [ 82.583928] l_e1000 0000:01:01.1 eth8: renamed from eth1
  676. [ 82.676797] audit: type=2080 audit(1655597994.987:45): <flags=1,exe="/lib/udev/vol_id",ppid=1538,pid=1542,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> setgroups([null]) = 0 (Success)
  677. [ 82.676841] audit: type=2080 audit(1655597994.987:46): <flags=1,exe="/lib/udev/vol_id",ppid=1538,pid=1542,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> setgid(r:99[99]) = 0 (Success)
  678. [ 82.676884] audit: type=2080 audit(1655597994.987:47): <flags=1,exe="/lib/udev/vol_id",ppid=1538,pid=1542,auid=0,uid={0,0,0,0},gid={99,99,99,99},tty=(none),ses=0> setuid(r:99[99]) = 0 (Success)
  679. [ 82.685392] audit: type=2080 audit(1655597994.997:48): <flags=1,exe="/sbin/modprobe",ppid=1415,pid=1420,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> init_module("evdev","") = 0 (Success)
  680. [ 82.696715] audit: type=2080 audit(1655597995.007:49): <flags=1,exe="/lib/udev/vol_id",ppid=1536,pid=1548,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> setgroups([null]) = 0 (Success)
  681. [ 82.696757] audit: type=2080 audit(1655597995.007:50): <flags=1,exe="/lib/udev/vol_id",ppid=1536,pid=1548,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> setgid(r:99[99]) = 0 (Success)
  682. [ 82.696798] audit: type=2080 audit(1655597995.007:51): <flags=1,exe="/lib/udev/vol_id",ppid=1536,pid=1548,auid=0,uid={0,0,0,0},gid={99,99,99,99},tty=(none),ses=0> setuid(r:99[99]) = 0 (Success)
  683. [ 82.716813] audit: type=2080 audit(1655597995.027:52): <flags=1,exe="/lib/udev/vol_id",ppid=1535,pid=1564,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> setgroups([null]) = 0 (Success)
  684. [ 82.863886] l_e1000 0000:01:01.2 eth6: renamed from eth2
  685. [ 82.999259] sd 0:0:0:0: Attached scsi generic sg0 type 0
  686. [ 83.537367] Adding 20000912k swap on /dev/sda3. Priority:-1 extents:1 across:20000912k SS
  687. [ 83.759574] EXT4-fs (sda2): re-mounted. Opts:
  688. [ 83.874200] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
  689. [ 83.876656] EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
  690. [ 83.879437] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
  691. [ 84.637495] EXT4-fs (sda1): mounting ext3 file system using the ext4 subsystem
  692. [ 84.639903] EXT4-fs (sda1): warning: maximal mount count reached, running e2fsck is recommended
  693. [ 84.642418] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
  694. [ 87.133136] audit_printk_skb: 201 callbacks suppressed
  695. [ 87.133142] audit: type=2080 audit(1655597999.437:120): <flags=1,exe="/sbin/modprobe",ppid=2199,pid=2201,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> init_module("x_tables","") = 0 (Success)
  696. [ 87.135726] ip_tables: (C) 2000-2006 Netfilter Core Team
  697. [ 87.135767] audit: type=2080 audit(1655597999.447:121): <flags=1,exe="/sbin/modprobe",ppid=2199,pid=2201,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> init_module("ip_tables","") = 0 (Success)
  698. [ 87.150973] audit: type=2080 audit(1655597999.457:122): <flags=1,exe="/sbin/modprobe",ppid=751,pid=2203,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> init_module("iptable_filter","") = 0 (Success)
  699. [ 87.733568] audit: type=2080 audit(1655598000.047:123): <flags=1,exe="/sbin/modprobe",ppid=2182,pid=2206,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> delete_module("iptable_filter",4800) = 0 (Success)
  700. [ 87.883548] audit: type=2080 audit(1655598000.197:124): <flags=1,exe="/sbin/modprobe",ppid=2182,pid=2206,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> delete_module("ip_tables",4800) = 0 (Success)
  701. [ 88.063544] audit: type=2080 audit(1655598000.377:125): <flags=1,exe="/sbin/modprobe",ppid=2182,pid=2206,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> delete_module("x_tables",4800) = 0 (Success)
  702. [ 88.083131] audit: type=2080 audit(1655598000.387:126): <flags=1,exe="/sbin/arping",ppid=2182,pid=2212,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> setuid(r:0[0]) = 0 (Success)
  703. [ 88.172269] audit: type=2080 audit(1655598000.477:127): <flags=1,exe="/sbin/arping",ppid=2182,pid=2215,auid=0,uid={0,0,0,0},gid={0,0,0,0},tty=(none),ses=0> setuid(r:0[0]) = 0 (Success)
  704. [ 89.456725] audit: type=1305 audit(1655598001.767:128): audit_pid=2312 old=0 auid=0 ses=0 subj= res=1
  705. [ 89.937346] capability: warning: `rpc.statd' uses 32-bit capabilities (legacy support in use)
  706. [ 90.246186] random: dd: uninitialized urandom read (512 bytes read)
  707. [ 90.570421] random: dbus-daemon: uninitialized urandom read (12 bytes read)
  708. [ 90.575401] random: dbus-daemon: uninitialized urandom read (12 bytes read)
  709. [ 91.137983] NET: Registered protocol family 10
  710. [ 91.633155] urandom_read: 2 callbacks suppressed
  711. [ 91.633160] random: hald: uninitialized urandom read (10 bytes read)
  712. [ 91.633347] random: hald: uninitialized urandom read (12 bytes read)
  713. [ 91.633711] random: hald: uninitialized urandom read (10 bytes read)
  714. [ 94.805171] tulip: loading out-of-tree module taints kernel.
  715. [ 94.806021] Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
  716. [ 98.384260] random: crng init done
  717. [ 98.384271] random: 1 urandom warning(s) missed due to ratelimiting
  718.  
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!