Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot 2016.03-20600-g0dbffd3-dirty (Sep 15 2017 - 12:36:40 +0100)
- CPU: Freescale i.MX6Q rev1.2 at 792 MHz
- Reset cause: POR
- Board: Nitrogen6_max
- I2C: ready
- DRAM: 2 GiB
- MMC: FSL_SDHC: 0, FSL_SDHC: 1
- SF: Detected SST26VF032B with page size 256 Bytes, erase size 4 KiB, total 4 MiB
- *** Warning - bad CRC, using default environment
- Display: hdmi:1280x720M@60 (1280x720)
- In: serial
- Out: serial
- Err: serial
- Current Boot Partition : <NULL>
- Net: FEC [PRIME]
- Hit any key to stop autoboot: 0
- AHCI 0000.0000 1 slots 1 ports ? Gbps 0x0 impl SATA mode
- flags:
- No port device detected!
- ** Bad device size - sata 0 **
- switch to partitions #0, OK
- mmc0 is current device
- reading /6x_bootscript
- 3194 bytes read in 15 ms (207 KiB/s)
- ## Executing script at 10008000
- reading uEnv.txt
- ** Unable to read file uEnv.txt **
- reading /imx6q-nitrogen6_max.dtb
- 49285 bytes read in 28 ms (1.7 MiB/s)
- Setting bus to 1
- Error writing the chip: -19
- only CEA modes allowed on HDMI port
- reading /zImage
- 5835736 bytes read in 282 ms (19.7 MiB/s)
- Kernel image @ 0x10800000 [ 0x000000 - 0x590bd8 ]
- ## Flattened Device Tree blob at 13000000
- Booting using the fdt blob at 0x13000000
- reserving fdt memory region: addr=13000000 size=d000
- Using Device Tree in place at 13000000, end 1300ffff
- Starting kernel ...
- Booting Linux on physical CPU 0x0
- Initializing cgroup subsys cpu
- Linux version 4.1.15-1.0.0_ga+yocto+g76c24a0 (tengri@tengri-OptiPlex-3040) (gcc version 5.3.0 (GCC) ) #1 SMP PREEMPT Mon Jul 17 16:28:46 +0530 2017
- CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
- CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- Machine model: Freescale i.MX6 Quad Nitrogen6 Max Board
- Reserved memory: created CMA memory pool at 0x62000000, size 320 MiB
- Reserved memory: initialized node linux,cma, compatible id shared-dma-pool
- Memory policy: Data cache writealloc
- PERCPU: Embedded 12 pages/cpu @d0efe000 s17164 r8192 d23796 u49152
- Built 1 zonelists in Zone order, mobility grouping on. Total pages: 521024
- Kernel command line: mxc_hdmi.only_cea=1 console=ttymxc0,115200 vmalloc=400M consoleblank=0 rootwait fixrtc root=/dev/mmcblk0p2
- PID hash table entries: 4096 (order: 2, 16384 bytes)
- Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
- Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
- Memory: 1737384K/2097152K available (8196K kernel code, 314K rwdata, 2472K rodata, 1024K init, 446K bss, 32088K reserved, 327680K cma-reserved, 425984K highmem)
- Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- vmalloc : 0xe6800000 - 0xff000000 ( 392 MB)
- lowmem : 0x80000000 - 0xe6000000 (1632 MB)
- pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
- modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
- .text : 0x80008000 - 0x80b6b0c4 (11661 kB)
- .init : 0x80c00000 - 0x80d00000 (1024 kB)
- .data : 0x80d00000 - 0x80d4ea80 ( 315 kB)
- .bss : 0x80d51000 - 0x80dc0ba0 ( 447 kB)
- SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- Preemptible hierarchical RCU implementation.
- Additional per-CPU info printed with stalls.
- NR_IRQS:16 nr_irqs:16 16
- L2C-310 erratum 769419 enabled
- L2C-310 enabling early BRESP for Cortex-A9
- L2C-310 full line of zeros enabled for Cortex-A9
- L2C-310 ID prefetch enabled, offset 16 lines
- L2C-310 dynamic clock gating enabled, standby mode enabled
- L2C-310 cache controller enabled, 16 ways, 1024 kB
- L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001
- mxc_clocksource_init 3000000
- Switching to timer-based delay loop, resolution 333ns
- sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns
- clocksource mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
- Console: colour dummy device 80x30
- Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000)
- pid_max: default: 32768 minimum: 301
- Security Framework initialized
- AppArmor: AppArmor initialized
- Mount-cache hash table entries: 4096 (order: 2, 16384 bytes)
- Mountpoint-cache hash table entries: 4096 (order: 2, 16384 bytes)
- CPU: Testing write buffer coherency: ok
- CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- Setting up static identity map for 0x10100000 - 0x10100058
- CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- Brought up 4 CPUs
- SMP: Total of 4 processors activated (24.00 BogoMIPS).
- CPU: All CPU(s) started in SVC mode.
- devtmpfs: initialized
- VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
- clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- pinctrl core: initialized pinctrl subsystem
- NET: Registered protocol family 16
- DMA: preallocated 256 KiB pool for atomic coherent allocations
- cpuidle: using governor ladder
- cpuidle: using governor menu
- CPU identified as i.MX6Q, silicon rev 1.2
- hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
- hw-breakpoint: maximum watchpoint size is 4 bytes.
- imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
- imx-gpc 20dc000.gpc: no fsl,ldo-bypass found!
- mxs-dma 110000.dma-apbh: initialized
- 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 25, base_baud = 5000000) is a IMX
- console [ttymxc0] enabled
- 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 300, base_baud = 5000000) is a IMX
- 21ec000.serial: ttymxc2 at MMIO 0x21ec000 (irq = 301, base_baud = 5000000) is a IMX
- serial_imx_probe_dt:170
- serial_imx_probe_dt:167
- serial_imx_probe_dt:56
- serial_imx_probe_dt:168
- 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 302, base_baud = 5000000) is a IMX
- SCSI subsystem initialized
- usbcore: registered new interface driver usbfs
- usbcore: registered new interface driver hub
- usbcore: registered new device driver usb
- 2000000.aips-bus:usbphy_nop1 supply vcc not found, using dummy regulator
- 2000000.aips-bus:usbphy_nop2 supply vcc not found, using dummy regulator
- i2c i2c-0: IMX I2C adapter registered
- i2c i2c-0: can't use DMA
- i2c i2c-1: IMX I2C adapter registered
- i2c i2c-1: can't use DMA
- i2c i2c-2: IMX I2C adapter registered
- i2c i2c-2: can't use DMA
- i2c i2c-1: Added multiplexed i2c bus 3
- i2c i2c-1: Added multiplexed i2c bus 4
- i2c-mux-gpio i2cmux@2: 2 port mux on 21a4000.i2c adapter
- i2c i2c-2: Added multiplexed i2c bus 5
- i2c-mux-gpio i2cmux@3: 1 port mux on 21a8000.i2c adapter
- media: Linux media interface: v0.10
- Linux video capture interface: v2.00
- pps_core: LinuxPPS API ver. 1 registered
- pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- PTP clock support registered
- imx-ipuv3 2400000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
- imx-ipuv3 2800000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
- mxc_mipi_csi2 21dc000.mipi_csi: i.MX MIPI CSI2 driver probed
- mxc_mipi_csi2 21dc000.mipi_csi: i.MX MIPI CSI2 dphy version is 0x3130302a
- MIPI CSI2 driver module loaded
- Advanced Linux Sound Architecture Driver Initialized.
- Bluetooth: Core ver 2.20
- NET: Registered protocol family 31
- Bluetooth: HCI device and connection manager initialized
- Bluetooth: HCI socket layer initialized
- Bluetooth: L2CAP socket layer initialized
- Bluetooth: SCO socket layer initialized
- NetLabel: Initializing
- NetLabel: domain hash size = 128
- NetLabel: protocols = UNLABELED CIPSOv4
- NetLabel: unlabeled traffic allowed by default
- Switched to clocksource mxc_timer1
- AppArmor: AppArmor Filesystem Enabled
- NET: Registered protocol family 2
- TCP established hash table entries: 16384 (order: 4, 65536 bytes)
- TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
- TCP: Hash tables configured (established 16384 bind 16384)
- UDP hash table entries: 1024 (order: 3, 32768 bytes)
- UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
- NET: Registered protocol family 1
- RPC: Registered named UNIX socket transport module.
- RPC: Registered udp transport module.
- RPC: Registered tcp transport module.
- RPC: Registered tcp NFSv4.1 backchannel transport module.
- CPU PMU: Failed to parse /soc/pmu/interrupt-affinity[0]
- hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
- imx rpmsg driver is registered.
- Bus freq driver module loaded
- futex hash table entries: 1024 (order: 4, 65536 bytes)
- audit: initializing netlink subsys (disabled)
- audit: type=2000 audit(0.930:1): initialized
- VFS: Disk quotas dquot_6.6.0
- VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- squashfs: version 4.0 (2009/01/31) Phillip Lougher
- NFS: Registering the id_resolver key type
- Key type id_resolver registered
- Key type id_legacy registered
- fuse init (API version 7.23)
- bounce: pool size: 64 pages
- io scheduler noop registered
- io scheduler deadline registered
- io scheduler cfq registered (default)
- backlight_lcd supply power not found, using dummy regulator
- backlight_lvds0 supply power not found, using dummy regulator
- backlight_lvds1 supply power not found, using dummy regulator
- ldb 2000000.aips-bus:ldb@020e0008: failed to find valid LVDS channel
- ldb: probe of 2000000.aips-bus:ldb@020e0008 failed with error -22
- mxc_hdmi 20e0000.hdmi_video: Detected HDMI controller 0x13:0xa:0xa0:0xc1
- fbcvt: 1280x720@60: CVT Name - .921M9
- mxc_sdc_fb fb@3: registered mxc display driver hdmi
- mxc_sdc_fb fb@3: 1280x720 h_sync,r,l: 40,110,220 v_sync,l,u: 5,5,20 pixclock=74250000 Hz
- imx-ipuv3 2800000.ipu: try ipu internal clk
- imx-ipuv3 2800000.ipu: disp=0, pixel_clk=74250000 74250000 parent=74250000 div=1
- find_field: [0] = 0x7ff, max=23
- find_field: [1] = 0xfff, max=23
- find_field: [2] = 0x17ff, max=23
- find_field: [0] = 0x820, max=29
- imx-ipuv3 2800000.ipu: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
- mxc_sdc_fb fb@3: 1280x720 h_sync,r,l: 40,110,220 v_sync,l,u: 5,5,20 pixclock=74250000 Hz
- imx-ipuv3 2800000.ipu: try ipu internal clk
- imx-ipuv3 2800000.ipu: disp=0, pixel_clk=74250000 74250000 parent=74250000 div=1
- Console: switching to colour frame buffer device 160x45
- add tfp410 i2c driver
- imx-sdma 20ec000.sdma: no iram assigned, using external mem
- imx-sdma 20ec000.sdma: no event needs to be remapped
- imx-sdma 20ec000.sdma: loaded firmware 3.3
- imx-sdma 20ec000.sdma: initialized
- imx sema4 driver is registered.
- [drm] Initialized drm 1.1.0 20060810
- [drm] Initialized vivante 1.0.0 20120216 on minor 0
- brd: module loaded
- loop: module loaded
- [max77823_init] start
- ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024
- ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480
- ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000
- ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000
- ahci-imx 2200000.sata: failed to reset phy: -110
- ahci-imx: probe of 2200000.sata failed with error -110
- m25p80 spi0.0: unrecognized JEDEC id bytes: bf, 26, 42
- spi_imx 2008000.ecspi: probed
- CAN device driver interface
- 2090000.flexcan supply xceiver not found, using dummy regulator
- flexcan 2090000.flexcan: device registered (reg_base=e6a88000, irq=34)
- 2188000.ethernet supply phy not found, using dummy regulator
- pps pps0: new PPS source ptp0
- libphy: fec_enet_mii_bus: probed
- fec 2188000.ethernet eth0: registered PHC device 0
- ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- ehci-pci: EHCI PCI platform driver
- usbcore: registered new interface driver cdc_acm
- cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- usbcore: registered new interface driver usb-storage
- usbcore: registered new interface driver usbserial
- usbcore: registered new interface driver usbserial_generic
- usbserial: USB Serial support registered for generic
- usbcore: registered new interface driver cp210x
- usbserial: USB Serial support registered for cp210x
- usbcore: registered new interface driver ftdi_sio
- usbserial: USB Serial support registered for FTDI USB Serial Device
- usbcore: registered new interface driver keyspan
- usbserial: USB Serial support registered for Keyspan - (without firmware)
- usbserial: USB Serial support registered for Keyspan 1 port adapter
- usbserial: USB Serial support registered for Keyspan 2 port adapter
- usbserial: USB Serial support registered for Keyspan 4 port adapter
- usbcore: registered new interface driver pl2303
- usbserial: USB Serial support registered for pl2303
- usbcore: registered new interface driver qcserial
- usbserial: USB Serial support registered for Qualcomm USB modem
- 2184800.usbmisc supply vbus-wakeup not found, using dummy regulator
- setup_reset_gpios:-2, flags 0
- setup_reset_gpios:204, flags 1
- setup_reset_gpios:-2, flags 0
- 2184200.usb supply vbus not found, using dummy regulator
- ci_hdrc ci_hdrc.1: EHCI Host Controller
- ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
- ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
- hub 1-0:1.0: USB hub found
- hub 1-0:1.0: 1 port detected
- mousedev: PS/2 mouse device common for all mice
- rtc-rv4162 0-0068: rv4162_probe: read error
- rtc-rv4162: probe of 0-0068 failed with error -5
- check_alarm_past: alarm in the past
- snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc0
- i2c /dev entries driver
- mxc_v4l2_output v4l2_out: V4L2 device registered as video16
- mxc_v4l2_output v4l2_out: V4L2 device registered as video17
- imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
- device-mapper: ioctl: 4.31.0-ioctl (2015-3-12) initialised: dm-devel@redhat.com
- sdhci: Secure Digital Host Controller Interface driver
- sdhci: Copyright(c) Pierre Ossman
- sdhci-pltfm: SDHCI platform and OF driver helper
- /soc/aips-bus@02100000/usdhc@02194000: voltage-ranges unspecified
- sdhci-esdhc-imx 2194000.usdhc: No vqmmc regulator found
- mmc2: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
- /soc/aips-bus@02100000/usdhc@02198000: voltage-ranges unspecified
- sdhci-esdhc-imx 2198000.usdhc: could not get ultra high speed state, work on normal mode
- sdhci-esdhc-imx 2198000.usdhc: Got CD GPIO
- sdhci-esdhc-imx 2198000.usdhc: No vqmmc regulator found
- mmc0: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA
- /soc/aips-bus@02100000/usdhc@0219c000: voltage-ranges unspecified
- sdhci-esdhc-imx 219c000.usdhc: could not get ultra high speed state, work on normal mode
- sdhci-esdhc-imx 219c000.usdhc: No vqmmc regulator found
- mmc0: host does not support reading read-only switch, assuming write-enable
- mmc1: SDHCI controller on 219c000.usdhc [219c000.usdhc] using ADMA
- mxc_vpu 2040000.vpu_fsl: VPU initialized
- mmc0: new high speed SDHC card at address 0001
- mxc_vdoa 21e4000.vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
- mxc_hdmi_cec soc:hdmi_cec@00120000: HDMI CEC initialized
- caam 2100000.caam: Entropy delay = 3200
- mmcblk0: mmc0:0001 SD16G 14.5 GiB
- mmcblk0: p1 p2
- caam 2100000.caam: Instantiated RNG4 SH0
- caam 2100000.caam: Instantiated RNG4 SH1
- caam 2100000.caam: device ID = 0x0a16010000000000 (Era -524)
- caam 2100000.caam: job rings = 2, qi = 0
- caam algorithms registered in /proc/crypto
- caam_jr 2101000.jr0: registering rng-caam
- usbcore: registered new interface driver usbhid
- usbhid: USB HID core driver
- sgtl5000: probe of 0-000a failed with error -5
- imx-sgtl5000 sound: audmux internal port setup failed
- imx-sgtl5000: probe of sound failed with error -22
- imx-audio-hdmi sound-hdmi: hdmi-hifi <-> soc:hdmi_audio@00120000 mapping ok
- NET: Registered protocol family 26
- NET: Registered protocol family 10
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement