API tools faq
paste
Advertisement
Dylan_Jeter1998

TSS - Installing Coilovers and Brakes

Dylan_Jeter1998
Jan 20th, 2021
61
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 26.00 KB | None | 0 0
raw download clone embed print report
  1. 2021-01-20 21:40:27 ★ Cletus Taylor walks into the garage proceeding to press on the Dodge's keyfob, popping the trunk.
  2. 2021-01-20 21:40:48 ★ Cletus Taylor walks over to the trunk, gripping its handle; then pulls it up into the open position.
  3. 2021-01-20 21:41:17 ★ Cletus Taylor grips set of coilovers, proceeding to slide them out of the trunk, then places them on the -
  4. 2021-01-20 21:41:20 ★ ground nearby. ((Cletus Taylor))
  5. 2021-01-20 21:46:57 ★ Cletus Taylor walks over to the corner, proceeding to grip the hydraulic jack; then rolls it over to the -
  6. 2021-01-20 21:47:01 ★ front of the Dodge. ((Cletus Taylor))
  7. 2021-01-20 21:47:36 ★ Cletus Taylor positions the jack underneath the Dodge's subframe, proceeding to carefully jack ---
  8. 2021-01-20 21:47:43 ★ it up, lifting the front wheels off the ground. ((Cletus Taylor))
  9. 2021-01-20 21:48:10 ★ Cletus Taylor steps aside, proceeding to take hold of two jack stands; then slides both underneath ---
  10. 2021-01-20 21:48:20 ★ the frame of the Dodge magnum. ((Cletus Taylor))
  11. 2021-01-20 21:48:36 ★ Cletus Taylor steps over to the jack, twisting the handle left; lowering the jack allowing the Magnum ---
  12. 2021-01-20 21:48:41 ★ to rest on the jack stands. ((Cletus Taylor))
  13. 2021-01-20 21:49:01 ★ Cletus Taylor rolls the jack out from underneath the Dodge, then repositions it underneath the rear ---
  14. 2021-01-20 21:49:29 ★ end of the vehicle proceeding to position it underneath the designated jacking point --- ((Cletus Taylor))
  15. 2021-01-20 21:49:45 ★ then continues to slowly pump the jack up lifting the rear wheels off the ground. ((Cletus Taylor))
  16. 2021-01-20 21:49:57 ★ Cletus Taylor steps aside, proceeding to take hold of the two final jack stands; then positions them ---
  17. 2021-01-20 21:50:39 ★ underneath the Dodge's frame. ((Cletus Taylor))
  18. 2021-01-20 21:50:51 ★ Cletus Taylor grips the jack, proceeding to twist the handle to the left; slowly lowering the jack ---
  19. 2021-01-20 21:50:58 ★ down allowing the Dodge to rest on the four jack stands. ((Cletus Taylor))
  20. 2021-01-20 21:52:12 ★ Cletus Taylor walks over to the toolbox, proceeding to grip its handle; then guides the cart towards ---
  21. 2021-01-20 21:52:16 ★ the front end of the Dodge. ((Cletus Taylor))
  22. 2021-01-20 21:52:51 ★ Cletus Taylor grips a drawer, continuing to open it; then takes hold of a breaker bar along with ---
  23. 2021-01-20 21:53:00 ★ the appropriate sized socket. ((Cletus Taylor))
  24. 2021-01-20 21:53:14 ★ Cletus Taylor connects the socket to the bar, proceeding to lean it agains the Dodge.
  25. 2021-01-20 21:53:37 ★ Cletus Taylor walks over to the cabinet, taking hold of the impact wrench, then strolls back to the Dodge.
  26. 2021-01-20 21:53:57 ★ Cletus Taylor steps towards the front-left tire, proceeding to quickly unbolt each of the five lug nuts; -
  27. 2021-01-20 21:54:05 ★ then places them on the floor. ((Cletus Taylor))
  28. 2021-01-20 21:54:18 ★ Cletus Taylor places the impact wrench on the ground, proceeding to grip the wheel with both hands ---
  29. 2021-01-20 21:54:28 ★ carefully tugging it off of the hub assembly. ((Cletus Taylor))
  30. 2021-01-20 21:54:37 ★ Cletus Taylor rolls the wheel aside, laying it over neatly.
  31. 2021-01-20 21:54:55 ★ Cletus Taylor walks back to the Dodge, proceeding to grip the breaker bar.
  32. 2021-01-20 21:55:31 ★ Cletus Taylor positions himself next to the wheel well, proceeding to lean into the wheel well visually --
  33. 2021-01-20 21:55:54 ★ searching for the brake caliper's bolts. ((Cletus Taylor))
  34. 2021-01-20 21:56:16 ★ Cletus Taylor would locate the bolts, proceeding to connect the wrench to the lower bolt, carefully ---
  35. 2021-01-20 21:56:30 ★ twisting it to the left numerous times; removing it from the bracket. ((Cletus Taylor))
  36. 2021-01-20 21:56:49 ★ Cletus Taylor moves onto the upper bolt, proceeding to quickly twist it to the left; removing it from ---
  37. 2021-01-20 21:56:51 ★ the bracket. ((Cletus Taylor))
  38. 2021-01-20 21:57:50 ★ Cletus Taylor places the two bolts on the floor, proceeding to grip the now-freed brake caliper, ---
  39. 2021-01-20 21:58:46 ★ continuing to slide it off of the rotor, then places it loosely on top of the lower --- ((Cletus Taylor))
  40. 2021-01-20 21:58:49 ★ control arm. ((Cletus Taylor))
  41. 2021-01-20 21:59:10 ★ Cletus Taylor reaches towards the toolbox, proceeding to take hold of the adjustable wrench; then ---
  42. 2021-01-20 21:59:22 ★ grips the brake caliper once again. ((Cletus Taylor))
  43. 2021-01-20 21:59:41 ★ Cletus Taylor connects the mouth of the adjustable wrench over the brake line connected to the ---
  44. 2021-01-20 21:59:59 ★ caliper, proceeding to adjust it to size, then quickly spins the bolt to the left a few --- ((Cletus Taylor))
  45. 2021-01-20 22:00:13 ★ times, thus disconnecting the brake line from the factory caliper. ((Cletus Taylor))
  46. 2021-01-20 22:00:30 ★ Cletus Taylor grips the factory caliper, placing it behind himself on the floor; then reaches back ---
  47. 2021-01-20 22:00:50 ★ towards the old factory brake rotor, carefully slidding it off of the hub assembly. ((Cletus Taylor))
  48. 2021-01-20 22:01:03 ★ Cletus Taylor places the old rotor on the floor, proceeding to dust his hands off on his coveralls.
  49. 2021-01-20 22:01:49 ★ Cletus Taylor leans to the side, proceeding to look at the suspension assembly of the Dodge, locating ---
  50. 2021-01-20 22:01:55 ★ the sway bar end link. ((Cletus Taylor))
  51. 2021-01-20 22:02:15 ★ Cletus Taylor connects the mouth of the wrench to the upper bolt, proceeding to twist it to the left ---
  52. 2021-01-20 22:02:30 ★ a few times, freeing it from the swaybar. ((Cletus Taylor))
  53. 2021-01-20 22:02:44 ★ Cletus Taylor grips the sway bar, proceeding to pop it up; disconnecting it from the end link.
  54. 2021-01-20 22:05:44 ★ Cletus Taylor stands up, proceeding to reach into the Dodge's open door; pulling the hood release ---
  55. 2021-01-20 22:05:54 ★ lever, then walks to the hood. ((Cletus Taylor))
  56. 2021-01-20 22:06:12 ★ Cletus Taylor slips his hand underneath the hood, proceeding to slide the latch aside, openign the hood
  57. 2021-01-20 22:06:27 ★ Cletus Taylor grabs ahold of the adjustable wrench, proceeding to lean over the engine bay ---
  58. 2021-01-20 22:06:53 ★ towards the upper strut mount bolts. ((Cletus Taylor))
  59. 2021-01-20 22:07:09 ★ Cletus Taylor connects the mouth of the wrench to one of the three bolts, quickly twisting it to the ---
  60. 2021-01-20 22:07:28 ★ left a few times, then moves onto the next bolt; eventually removing the three bolts --- ((Cletus Taylor))
  61. 2021-01-20 22:07:37 ★ thus freeing the upper-section of the factory struts. ((Cletus Taylor))
  62. 2021-01-20 22:07:51 ★ Cletus Taylor places the bolts on top of the engine, proceeding to walk back to the side of the Dodge.
  63. 2021-01-20 22:09:44 ★ Cletus Taylor reaches towards the lower section of the factory strut, proceeding to connect the ---
  64. 2021-01-20 22:10:05 ★ mouth of the wrench to one of the two lower mounting bolts of the strut, then quickly --- ((Cletus Taylor))
  65. 2021-01-20 22:10:17 ★ twists it to the left a few times; then moves onto the next bolt. ((Cletus Taylor))
  66. 2021-01-20 22:10:40 ★ Cletus Taylor places the two bolts on the ground, proceeding to place the wrench with them.
  67. 2021-01-20 22:14:24 ★ Cletus Taylor leans into the wheel well, proceeding to look towards the lower control arm, then ---
  68. 2021-01-20 22:19:43 ★ looks up towards the upper control arm; locating the nut securing it to the lower balljoint. ((Cletus Taylor))
  69. 2021-01-20 22:19:59 ★ Cletus Taylor connects the wrench to the bolt, proceeding to quickly twist it to the left; removing it ---
  70. 2021-01-20 22:20:11 ★ entirely, thus allowing the lower control arm to hang freely. ((Cletus Taylor))
  71. 2021-01-20 22:20:34 ★ Cletus Taylor grips the now completely freed strut, proceeding to pull it down; sliding it out.
  72. 2021-01-20 22:21:04 ★ Cletus Taylor leans over, proceeding to place the old strut down; then grips the new coilover.
  73. 2021-01-20 22:21:44 ★ Cletus Taylor stands up, proceeding to grip the three bolts from the engine; then continues to slide ---
  74. 2021-01-20 22:22:03 ★ the coilover into position; loosely securing it with the three bolts, twisting them in by hand. ((Cletus Taylor))
  75. 2021-01-20 22:22:25 ★ Cletus Taylor crouches back down, proceeding to lift the lower control arm up connecting it to ---
  76. 2021-01-20 22:22:31 ★ the bottom of the coilover. ((Cletus Taylor))
  77. 2021-01-20 22:23:41 ★ Cletus Taylor grips the two bolts, twisting them into the lower section of the coilover by hand; thus ---
  78. 2021-01-20 22:23:49 ★ loosely securing the coilover to the lower control arm. ((Cletus Taylor))
  79. 2021-01-20 22:24:49 ★ Cletus Taylor grips the bolt, proceeding to twist it back into position; thus loosely connecting the ---
  80. 2021-01-20 22:24:56 ★ upper control arm to the lower balljoint. ((Cletus Taylor))
  81. 2021-01-20 22:25:29 ★ Cletus Taylor grips the wrench, proceeding to tighten down each of the bolts; firmly securing the ---
  82. 2021-01-20 22:25:44 ★ coilover into position with the remainder of the suspension components. ((Cletus Taylor))
  83. 2021-01-20 22:25:54 ★ Cletus Taylor leans back, taking hold of the Brembo box; proceeding to open it.
  84. 2021-01-20 22:26:41 ★ Cletus Taylor opens the box, proceeding to slip out the new cross drilled rotor; proceeding to slide ---
  85. 2021-01-20 22:26:47 ★ it into position on the hub assembly. ((Cletus Taylor))
  86. 2021-01-20 22:27:10 ★ Cletus Taylor reaches into the box once more, slipping out the Brembo brake caliper; then inspecting it.
  87. 2021-01-20 22:27:30 ★ Cletus Taylor locates the brake line connection point, proceeding to grip the Dodge's brake line ---
  88. 2021-01-20 22:27:35 ★ pressing it into position. ((Cletus Taylor))
  89. 2021-01-20 22:28:08 ★ Cletus Taylor takes hold of the wrench, proceeding to then twist the bolt into position; securing the ---
  90. 2021-01-20 22:28:18 ★ brake line to the caliper. ((Cletus Taylor))
  91. 2021-01-20 22:28:32 ★ Cletus Taylor carefully slides the caliper into position over the rotor, proceeding to grip the two ---
  92. 2021-01-20 22:29:01 ★ bolts; then continues to thread them into the back of the caliper; loosely securing it --- ((Cletus Taylor))
  93. 2021-01-20 22:29:04 ★ into position. ((Cletus Taylor))
  94. 2021-01-20 22:29:38 ★ Cletus Taylor grips his wrench, proceeding to tighten down the two bolts, securing the caliper into ---
  95. 2021-01-20 22:29:43 ★ position on the vehicle. ((Cletus Taylor))
  96. 2021-01-20 22:30:00 ★ Cletus Taylor grabs ahold of the wheel, proceeding to roll it back into position, then lifts it up ---
  97. 2021-01-20 22:30:12 ★ carefully sliding it onto the studs on the hub. ((Cletus Taylor))
  98. 2021-01-20 22:30:28 ★ Cletus Taylor grips the impact wrench, proceeding to quickly tighten the five lug nuts down; thus ---
  99. 2021-01-20 22:30:33 ★ securing the wheel. ((Cletus Taylor))
  100. 2021-01-20 22:37:44 ★ Cletus Taylor steps towards the front-right tire, proceeding to quickly unbolt each of the five lug nuts; -
  101. 2021-01-20 22:37:57 ★ proceeding to place them onto the floor nearby. ((Cletus Taylor))
  102. 2021-01-20 22:38:14 ★ Cletus Taylor grips the wheel, proceeding to slide it off of the hub; then rolls it aside.
  103. 2021-01-20 22:39:12 ★ Cletus Taylor takes hold of the wrench, proceeding to walk back to the front-right of the Dodge; ---
  104. 2021-01-20 22:39:15 ★ then crouches down. ((Cletus Taylor))
  105. 2021-01-20 22:39:31 ★ Cletus Taylor reaches behind the factory brake caliper, proceeding to connect the wrench to the ---
  106. 2021-01-20 22:40:00 ★ one of the two bolts securing the caliper to the vehicle, proceeding to loosen it. ((Cletus Taylor))
  107. 2021-01-20 22:40:22 ★ Cletus Taylor then moves onto the second bolt, quickly twisting it to the left; freeing the caliper.
  108. 2021-01-20 22:40:44 ★ Cletus Taylor grips the factory caliper, proceeding to slide it off; then takes hold of the wrench, ---
  109. 2021-01-20 22:41:06 ★ adjusting it to size over the brake line's bolt, twisting it to the left; disconnecting --- ((Cletus Taylor))
  110. 2021-01-20 22:41:18 ★ the brake line from the caliper. ((Cletus Taylor))
  111. 2021-01-20 22:41:31 ★ Cletus Taylor places the caliper aside, proceeding to grip the factory brake rotor; slipping it off.
  112. 2021-01-20 22:41:47 ★ Cletus Taylor places both items down, proceeding to stand back up.
  113. 2021-01-20 22:42:05 ★ Cletus Taylor reaches towards the upper-section of the factory strut, proceeding to quickly ---
  114. 2021-01-20 22:42:14 ★ loosen the three bolts securing the strut to the apron. ((Cletus Taylor))
  115. 2021-01-20 22:42:27 ★ Cletus Taylor places the bolts ontop of the engine, proceeding to crouch down; then continues to ---
  116. 2021-01-20 22:42:56 ★ connect the wrench to one of the two lower-bolts on the strut, quickly twisting it --- ((Cletus Taylor))
  117. 2021-01-20 22:42:59 ★ to the left, removing it. ((Cletus Taylor))
  118. 2021-01-20 22:43:18 ★ Cletus Taylor then moves on to the final bolt, quickly loosening it from its position; placing both ---
  119. 2021-01-20 22:43:21 ★ onto the floor. ((Cletus Taylor))
  120. 2021-01-20 22:44:25 ★ Cletus Taylor looks over towards the swaybar end link, proceeding to connect the wrench to it ---
  121. 2021-01-20 22:44:41 ★ s mounting bolt, quickly twisting it to the left in order to disconnect the sway bar end --- ((Cletus Taylor))
  122. 2021-01-20 22:44:45 ★ link from the factory strut. ((Cletus Taylor))
  123. 2021-01-20 22:44:59 ★ Cletus Taylor places the bolt on the floor, proceeding to then reach up towards the upper control ---
  124. 2021-01-20 22:45:12 ★ arm, continuing to quickly loosen the bolt securing it to the lower control arm. ((Cletus Taylor))
  125. 2021-01-20 22:45:28 ★ Cletus Taylor grips the lower control arm, proceeding to press it down; allowing it to hang.
  126. 2021-01-20 22:45:44 ★ Cletus Taylor takes hold of the factory strut, proceeding to slip it out of position; then tosses it aside
  127. 2021-01-20 22:46:36 ★ Cletus Taylor walks over to the box, taking hold of the final front coilover, proceeding to walk back ---
  128. 2021-01-20 22:46:50 ★ towards the Dodge, taking hold of the three upper-mounting bolts from the engine cover. ((Cletus Taylor))
  129. 2021-01-20 22:47:11 ★ Cletus Taylor carefully slides the coilover into position, loosely hand threading the bolts into ---
  130. 2021-01-20 22:47:21 ★ position, allowing the coilover to hang from the apron. ((Cletus Taylor))
  131. 2021-01-20 22:47:36 ★ Cletus Taylor crouches down, proceeding to take hold of the lower control arm; lifting it up until it'd --
  132. 2021-01-20 22:47:42 ★ touch the bottom of the coilver. ((Cletus Taylor))
  133. 2021-01-20 22:47:56 ★ Cletus Taylor grips the two bolts, proceeding to hand thread them into their holes; loosely securing ---
  134. 2021-01-20 22:48:02 ★ the lower control arm to the coilover. ((Cletus Taylor))
  135. 2021-01-20 22:49:29 ★ Cletus Taylor grips the bolt, proceeding to twist it back into position; thus loosely connecting the ---
  136. 2021-01-20 22:49:36 ★ upper control arm to the lower balljoint. ((Cletus Taylor))
  137. 2021-01-20 22:50:05 ★ Cletus Taylor takes hold of his wrench, proceeding to quickly tighten down each of the previous bolts ---
  138. 2021-01-20 22:50:36 ★ thus firmly securing the coilover into position along with the remainder of the previous -- ((Cletus Taylor))
  139. 2021-01-20 22:50:39 ★ removed bolts. ((Cletus Taylor))
  140. 2021-01-20 22:50:59 ★ Cletus Taylor grips the sway bar end link, connecting it to the new coilover; proceeding to quickly ---
  141. 2021-01-20 22:51:09 ★ tighten down the bolt, then walks to the driver side. ((Cletus Taylor))
  142. 2021-01-20 22:51:26 ★ Cletus Taylor reaches into the wheel well, proceeding to connect the driver-side sway bar end link ---
  143. 2021-01-20 22:51:39 ★ to the coilover, then quickly tightens its bolt with the wrench. ((Cletus Taylor))
  144. 2021-01-20 22:52:00 ★ Cletus Taylor walks over to the box, then slips out the new Brembo brake rotor along with the caliper.
  145. 2021-01-20 22:56:31 ★ Cletus Taylor takes both items over to the front-right side of the Dodge, proceeding to place them down.
  146. 2021-01-20 22:56:45 ★ Cletus Taylor takes hold of the new rotor, proceeding to slide it into position on the hub; then grips ---
  147. 2021-01-20 22:56:54 ★ the Brembo caliper, carefully lifting it up. ((Cletus Taylor))
  148. 2021-01-20 22:57:09 ★ Cletus Taylor twists it around, proceeding to grip the Dodge's brake line, then plugs it into the ---
  149. 2021-01-20 22:57:21 ★ caliper, loosely securing it with the bolt. ((Cletus Taylor))
  150. 2021-01-20 22:57:40 ★ Cletus Taylor takes hold of the wrench, proceeding to tighten the bolt; thus securing the line to the ---
  151. 2021-01-20 22:57:43 ★ caliper firmly. ((Cletus Taylor))
  152. 2021-01-20 22:58:01 ★ Cletus Taylor carefully slides the caliper on over the rotor, proceeding to grip the two bolts; threading
  153. 2021-01-20 22:58:07 ★ them into position by hand. ((Cletus Taylor))
  154. 2021-01-20 22:58:19 ★ Cletus Taylor grips the wrench, proceeding to tighten both bolts down firmly.
  155. 2021-01-20 22:58:34 ★ Cletus Taylor pockets the wrench, proceeding to then lean over; taking hold of the wheel.
  156. 2021-01-20 22:58:49 ★ Cletus Taylor rolls the wheel over towards the Dodge, proceeding to lift it up; carefulyl sliding it ---
  157. 2021-01-20 22:58:53 ★ onto the hub. ((Cletus Taylor))
  158. 2021-01-20 22:59:09 ★ Cletus Taylor grips each of the five lug nuts, quickly threading them in by hand; then takes hold ---
  159. 2021-01-20 22:59:12 ★ of the impact wrench. ((Cletus Taylor))
  160. 2021-01-20 22:59:25 ★ Cletus Taylor connects the socket on the impact to one of the five lug nuts, quickly tightening it ---
  161. 2021-01-20 22:59:37 ★ down, then moves onto the next nut; eventually tightening all five. ((Cletus Taylor))
  162. 2021-01-20 22:59:48 ★ Cletus Taylor places the impact down, proceeding to slide himself back.
  163. 2021-01-20 23:01:23 ★ Cletus Taylor stands up, proceeding to push the hood down; shutting it.
  164. 2021-01-20 23:01:50 ★ Cletus Taylor grips the impact wrench, proceeding to crouch down; carefully connecting the socket ---
  165. 2021-01-20 23:02:11 ★ to one of the lug nuts on the rear-right wheel, quickly loosening it with the impact, then - ((Cletus Taylor))
  166. 2021-01-20 23:02:18 ★ moves onto the next, eventually removing all five lug nuts. ((Cletus Taylor))
  167. 2021-01-20 23:02:40 ★ Cletus Taylor places the impact wrench down, proceeding to grip the wheel; slidding it off of the hub
  168. 2021-01-20 23:02:53 ★ Cletus Taylor rolls the wheel aside, proceeding to lay it over; then takes hold of the impact wrench.
  169. 2021-01-20 23:03:15 ★ Cletus Taylor steps towards the rear-left wheel, proceeding to connect the socket to one of the ---
  170. 2021-01-20 23:03:27 ★ lug nuts, quickly loosening it with the impact, then moves onto the next bolt. ((Cletus Taylor))
  171. 2021-01-20 23:03:38 ★ Cletus Taylor removes all five lug nuts, proceeding to then place the impact down.
  172. 2021-01-20 23:03:52 ★ Cletus Taylor takes hold of the wheel, proceeding to slide it off of the hub, then rolls it aside.
  173. 2021-01-20 23:07:45 ★ Cletus Taylor reaches into his pocket, proceeding to remove the wrench; then crouches down at ---
  174. 2021-01-20 23:07:49 ★ the rear-left of the Dodge. ((Cletus Taylor))
  175. 2021-01-20 23:08:06 ★ Cletus Taylor reaches behind the brake caliper, proceeding to quickly loosen the two bolts ---
  176. 2021-01-20 23:08:17 ★ securing the caliper to the bracket, then places them on the floor. ((Cletus Taylor))
  177. 2021-01-20 23:08:45 ★ Cletus Taylor takes hold of the caliper, carefully sliding it out of position; then continues to loosen --
  178. 2021-01-20 23:08:50 ★ the nut on the brake line. ((Cletus Taylor))
  179. 2021-01-20 23:09:12 ★ Cletus Taylor disconnects the brake line, proceeding to place it aside.
  180. 2021-01-20 23:09:48 ★ Cletus Taylor places the factory caliper down, proceeding to take hold of the factory rotor, sliding ---
  181. 2021-01-20 23:09:55 ★ it out of position. ((Cletus Taylor))
  182. 2021-01-20 23:10:09 ★ Cletus Taylor takes hold of both factory items, proceeding to walk to the passenger side.
  183. 2021-01-20 23:10:43 ★ Cletus Taylor places the two items onto the floor, proceeding to take hold of his wrench once more.
  184. 2021-01-20 23:11:01 ★ Cletus Taylor reaches behind the brake caliper, proceeding to quickly loosen the two bolts; ---
  185. 2021-01-20 23:11:20 ★ on the back of the caliper, then proceeds to grip the caliper, carefully sliding it off. ((Cletus Taylor))
  186. 2021-01-20 23:11:38 ★ Cletus Taylor loosens the brake line's nut, proceeding to disconenct the brake line from the caliper.
  187. 2021-01-20 23:11:57 ★ Cletus Taylor hangs the brake line aside, proceeding to place the caliper on the floor with the old ---
  188. 2021-01-20 23:12:01 ★ factory unit. ((Cletus Taylor))
  189. 2021-01-20 23:12:19 ★ Cletus Taylor grabs ahold of the old brake rotor, carefully sliding it out of position; placing it ontop -
  190. 2021-01-20 23:12:26 ★ of the other rotor. ((Cletus Taylor))
  191. 2021-01-20 23:13:15 ★ Cletus Taylor stands up, proceeding to walk to the trunk of the Dodge.
  192. 2021-01-20 23:17:19 ★ Cletus Taylor leans into the previously opened trunk, proceeding to grip the carpets on each side ---
  193. 2021-01-20 23:17:33 ★ curling them over, exposing the upper hardware for the factory stuts. ((Cletus Taylor))
  194. 2021-01-20 23:17:52 ★ Cletus Taylor reaches over, taking hold of the wrench, proceeding to quickly unbolt each of the ---
  195. 2021-01-20 23:18:08 ★ three bolts on the upper-section of the stut on the passenger side, then moves onto the --- ((Cletus
  196. aylor))
  197. 2021-01-20 23:18:18 ★ driver side, completely removing each of the three bolts from the strut. ((Cletus Taylor))
  198. 2021-01-20 23:18:32 ★ Cletus Taylor places the bolts on the floor of the Dodge, proceeding to lean back out of the trunk.
  199. 2021-01-20 23:18:46 ★ Cletus Taylor walks to the rear-right side of the Dodge, proceeding to connect the wrench to the ---
  200. 2021-01-20 23:19:24 ★ lowest bolt on the factory strut, quickly twisting it to the left, then moves onto the --- ((Cletus Taylor))
  201. 2021-01-20 23:19:33 ★ second bolt, quickly twisting it to the left. ((Cletus Taylor))
  202. 2021-01-20 23:19:51 ★ Cletus Taylor places both bolts on the floor, proceeding to then grip the factory stut, pulling it out.
  203. 2021-01-20 23:20:11 ★ Cletus Taylor walks over to the driver-side of the Dodge ,proceeding to complete the same steps ---
  204. 2021-01-20 23:20:19 ★ to the factory strut, removing it from its position. ((Cletus Taylor))
  205. 2021-01-20 23:20:42 ★ Cletus Taylor places both factory struts aside, proceeding to take hold of the replacement coilovers ---
  206. 2021-01-20 23:20:50 ★ unboxxing them. ((Cletus Taylor))
  207. 2021-01-20 23:21:17 ★ Cletus Taylor places one coilover on the floor on the driver-side, proceeding to walk over to the oppsite
  208. 2021-01-20 23:22:53 ★ Cletus Taylor carefully guides the coilover into position, pressing the bottom of the coilover against ---
  209. 2021-01-20 23:23:00 ★ the lower control arm. ((Cletus Taylor))
  210. 2021-01-20 23:23:31 ★ Cletus Taylor grips the two bolts, proceeding to twist them into position by hand; loosely securing it.
  211. 2021-01-20 23:23:52 ★ Cletus Taylor steps towards the trunk, proceeding to grip the three bolts; continuing to twist them ---
  212. 2021-01-20 23:23:57 ★ into position by hand. ((Cletus Taylor))
  213. 2021-01-20 23:24:12 ★ Cletus Taylor grips the wrench, quickly tightening all three bolts down, then steps towards the ---
  214. 2021-01-20 23:24:27 ★ side of the vehicle. ((Cletus Taylor))
  215. 2021-01-20 23:24:39 ★ Cletus Taylor grips the wrench firmly, proceeding to tighten down each of the bolts.
  216. 2021-01-20 23:25:01 ★ Cletus Taylor steps over to the driver side of the Dodge, proceeding to grip the coilover; then ---
  217. 2021-01-20 23:25:14 ★ proceeds to complete the same set of actions, finishing up the coilover installation. ((Cletus Taylor))
  218. 2021-01-20 23:25:30 ★ Cletus Taylor leans over, taking hold of the final Brembo box, proceeding to open it up.
  219. 2021-01-20 23:25:43 ★ Cletus Taylor slips out the new rotor, proceeding to lift it into position; sliding it on.
  220. 2021-01-20 23:26:09 ★ Cletus Taylor grabs ahold of the new caliper, proceeding to take hold of the brake line; connecting ---
  221. 2021-01-20 23:26:14 ★ it to the rear of the caliper. ((Cletus Taylor))
  222. 2021-01-20 23:26:28 ★ Cletus Taylor grips the wrench, proceeding to tighten the nut on the line; securing it to the caliper.
  223. 2021-01-20 23:27:03 ★ Cletus Taylor carefully slides the caliper into position over the rotor, then takes hold of the two ---
  224. 2021-01-20 23:27:19 ★ bolts, carefully threading them into their holes; loosely securing the caliper. ((Cletus Taylor))
  225. 2021-01-20 23:27:31 ★ Cletus Taylor takes hold of his wrench, proceeding to tighten down each of the two bolts, then ---
  226. 2021-01-20 23:27:41 ★ takes hold of the final caliper and rotor. ((Cletus Taylor))
  227. 2021-01-20 23:27:59 ★ Cletus Taylor walks over to the passenger-side, proceeding to complete the same sets of actions; ---
  228. 2021-01-20 23:28:06 ★ finishing up the brakes. ((Cletus Taylor))
  229. 2021-01-20 23:28:22 ★ Cletus Taylor takes hold of both rear wheels, proceeding to roll them into position.
  230. 2021-01-20 23:28:41 ★ Cletus Taylor takes hold of the rear-left wheel, proceeding to lift it up ont othe hub; then takes hold --
  231. 2021-01-20 23:28:52 ★ of the five lug nuts, quickly twisting them into position by hand. ((Cletus Taylor))
  232. 2021-01-20 23:29:14 ★ Cletus Taylor grips the impact wrench, proceeding to connect its socket to one lug nut; quickly ---
  233. 2021-01-20 23:29:26 ★ tightening it down, then moves onto the next until he'd finish up the nuts. ((Cletus Taylor))
  234. 2021-01-20 23:29:41 ★ Cletus Taylor walks over to the driver-side, proceeding to complete the same sets of actions, ---
  235. 2021-01-20 23:29:46 ★ reinstalling the final wheel. ((Cletus Taylor))
  236.  
  237.  
  238. (( By far not my best roleplay, but this was done late at night after work trying to get things done so I could go to sleep and be ready for work the next day. -El Chapo ))
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!