Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- =~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2018.11.20 18:17:41 =~=~=~=~=~=~=~=~=~=~=~=
- Format: Log Type - Time(microsec) - Message - Optional Info
- Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
- S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-57424
- S - IMAGE_VARIANT_STRING=DAABANAZA
- S - OEM_IMAGE_VERSION_STRING=CRM
- S - Boot Config, 0x00000021
- S - Core 0 Frequency, 0 MHz
- B - 261 - PBL, Start
- B - 1339 - bootable_media_detect_entry, Start
- B - 1679 - bootable_media_detect_success, Start
- B - 1692 - elf_loader_entry, Start
- B - 5069 - auth_hash_seg_entry, Start
- B - 7212 - auth_hash_seg_exit, Start
- B - 571046 - elf_segs_hash_verify_entry, Start
- B - 686135 - PBL, End
- B - 686159 - SBL1, Start
- B - 774661 - pm_device_init, Start
- D - 6 - pm_device_init, Delta
- B - 776106 - boot_flash_init, Start
- D - 54269 - boot_flash_init, Delta
- B - 834550 - boot_config_data_table_init, Start
- D - 3808 - boot_config_data_table_init, Delta - (419 Bytes)
- B - 841750 - clock_init, Start
- D - 7560 - clock_init, Delta
- B - 853829 - CDT version:2,Platform ID:8,Major ID:2,Minor ID:0,Subtype:0
- B - 857315 - sbl1_ddr_set_params, Start
- B - 862300 - cpr_init, Start
- D - 2 - cpr_init, Delta
- B - 866791 - Pre_DDR_clock_init, Start
- D - 4 - Pre_DDR_clock_init, Delta
- D - 13142 - sbl1_ddr_set_params, Delta
- B - 880490 - pm_driver_init, Start
- D - 2 - pm_driver_init, Delta
- B - 950880 - sbl1_wait_for_ddr_training, Start
- D - 29 - sbl1_wait_for_ddr_training, Delta
- B - 966524 - Image Load, Start
- D - 134940 - QSEE Image Loaded, Delta - (261824 Bytes)
- B - 1101961 - Image Load, Start
- D - 1443 - SEC Image Loaded, Delta - (2048 Bytes)
- B - 1112184 - Image Load, Start
- D - 174315 - APPSBL Image Loaded, Delta - (356059 Bytes)
- B - 1286921 - QSEE Execution, Start
- D - 60 - QSEE Execution, Delta
- B - 1293084 - SBL1, End
- D - 609034 - SBL1, Delta
- S - Flash Throughput, 1997 KB/s (620350 Bytes, 310526 us)
- S - DDR Frequency, 537 MHz
- U-Boot 2012.07 [Attitude Adjustment 12.09-rc1,unknown] (May 30 2016 - 10:09:23)
- smem ram ptable found: ver: 1 len: 3
- DRAM: 256 MiB
- machid : 0x8020000
- NAND: SF: Detected MX25L25635E with page size 4 KiB, total 32 MiB
- ipq_spi: page_size: 0x100, sector_size: 0x1000, size: 0x2000000
- 32 MiB
- In: serial
- Out: serial
- Err: serial
- machid: 8020000
- Net: MAC0 addr:0:3:7f:ba:db:ad
- PHY ID1: 0x4d
- PHY ID2: 0xd0b1
- ipq40xx_ess_sw_init done
- eth0
- Warning: eth0 MAC addresses don't match:
- Address in SROM is 00:03:7f:ba:db:ad
- Address in environment is 60:31:97:01:79:68
- ZyXEL zloader v2.02 (May 30 2016 - 10:09:39)
- Multiboot clinent version: 2.0
- eth0 PHY0 Down Speed :10 Half duplex
- eth0 PHY1 Down Speed :10 Half duplex
- eth0 PHY2 Down Speed :10 Half duplex
- eth0 PHY3 Down Speed :10 Half duplex
- eth0 PHY4 Down Speed :10 Half duplex
- Ethernet interface failed to initialized!
- Hit any key to stop autoboot: 3120
- SF: Detected MX25L25635E with page size 4 KiB, total 32 MiB
- ## Booting kernel from FIT Image at 84000000 ...
- Using 'config@1' configuration
- Trying 'kernel@1' kernel subimage
- Description: ARM OpenWrt Linux-4.14.81
- Type: Kernel Image
- Compression: lzma compressed
- Data Start: 0x840000e4
- Data Size: 2242270 Bytes = 2.1 MiB
- Architecture: ARM
- OS: Linux
- Load Address: 0x80208000
- Entry Point: 0x80208000
- Hash algo: crc32
- Hash value: a705549b
- Hash algo: sha1
- Hash value: 9234656f5e7bb336d158441f60c02ebeda02175a
- Verifying Hash Integrity ... crc32+ sha1+ OK
- ## Flattened Device Tree from FIT Image at 84000000
- Using 'config@1' configuration
- Trying 'fdt@1' FDT blob subimage
- Description: ARM OpenWrt zyxel_nbg6617 device tree blob
- Type: Flat Device Tree
- Compression: uncompressed
- Data Start: 0x842238fc
- Data Size: 16792 Bytes = 16.4 KiB
- Architecture: ARM
- Hash algo: crc32
- Hash value: 8f21d435
- Hash algo: sha1
- Hash value: e9e01e4dd18f52a20d0f59ed56b5589a346092f2
- Verifying Hash Integrity ... crc32+ sha1+ OK
- Booting using the fdt blob at 0x842238fc
- Uncompressing Kernel Image ... OK
- Loading Device Tree to 86ff8000, end 86fff197 ... OK
- ipq: fdt fixup unable to find compatible node
- eth0 MAC Address from ART is not valid
- eth1 MAC Address from ART is not valid
- Using machid 0x8020000 from environment
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 4.14.81 (buildbot@buildslave) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r8463-59ff8687c7)) #0 SMP Thu Nov 15 20:19:37 2018
- [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: div instructions available: patching division code
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] OF: fdt: Machine model: ZyXEL NBG6617
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] random: get_random_bytes called from start_kernel+0x88/0x3c4 with crng_init=0
- [ 0.000000] percpu: Embedded 15 pages/cpu @cfdaf000 s29388 r8192 d23860 u61440
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64512
- [ 0.000000] Kernel command line: board=NBG6617 root=mtd:rootfs zld_ver=2.02 mtdparts=spi0.0:0x60000@0x60000(0:QSEE)ro,0x80000@0xE0000(u-boot)ro,0x10000(env)ro,0x10000(0:ART)ro,0x400000(HLOS),0x10000(dualflag),0x10000(header),0x100000(romd),0x100000(rootfs_data),0x1860000(rootfs) mtdparts= root=31:13
- [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.000000] Memory: 249928K/260096K available (4352K kernel code, 145K rwdata, 1196K rodata, 1024K init, 235K bss, 10168K reserved, 0K cma-reserved, 0K highmem)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- [ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0208000 - 0xc0740378 (5345 kB)
- [ 0.000000] .init : 0xc0900000 - 0xc0a00000 (1024 kB)
- [ 0.000000] .data : 0xc0a00000 - 0xc0a24640 ( 146 kB)
- [ 0.000000] .bss : 0xc0a26000 - 0xc0a60c58 ( 236 kB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
- [ 0.000000] arch_timer: cp15 timer(s) running at 48.00MHz (virt).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb11fd3bfb, max_idle_ns: 440795203732 ns
- [ 0.000009] sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 4398046511096ns
- [ 0.000023] Switching to timer-based delay loop, resolution 20ns
- [ 0.000258] Calibrating delay loop (skipped), value calculated using timer frequency.. 96.00 BogoMIPS (lpj=480000)
- [ 0.000275] pid_max: default: 32768 minimum: 301
- [ 0.000414] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.000430] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.000986] CPU: Testing write buffer coherency: ok
- [ 0.001683] Setting up static identity map for 0x80300000 - 0x80300060
- [ 0.001826] Hierarchical SRCU implementation.
- [ 0.002467] smp: Bringing up secondary CPUs ...
- [ 0.005200] smp: Brought up 1 node, 4 CPUs
- [ 0.005220] SMP: Total of 4 processors activated (384.00 BogoMIPS).
- [ 0.005228] CPU: All CPU(s) started in SVC mode.
- [ 0.009494] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
- [ 0.009650] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.009675] futex hash table entries: 1024 (order: 4, 65536 bytes)
- [ 0.009870] pinctrl core: initialized pinctrl subsystem
- [ 0.010813] NET: Registered protocol family 16
- [ 0.011138] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.012161] cpuidle: using governor ladder
- [ 0.012203] cpuidle: using governor menu
- [ 0.029098] usbcore: registered new interface driver usbfs
- [ 0.029158] usbcore: registered new interface driver hub
- [ 0.029237] usbcore: registered new device driver usb
- [ 0.029284] pps_core: LinuxPPS API ver. 1 registered
- [ 0.029294] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.029318] PTP clock support registered
- [ 0.030628] clocksource: Switched to clocksource arch_sys_counter
- [ 0.031454] NET: Registered protocol family 2
- [ 0.032132] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.032172] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
- [ 0.032220] TCP: Hash tables configured (established 2048 bind 2048)
- [ 0.032323] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.032359] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.032539] NET: Registered protocol family 1
- [ 0.033580] No memory allocated for crashlog
- [ 0.033782] workingset: timestamp_bits=30 max_order=16 bucket_order=0
- [ 0.037007] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.037021] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 0.042073] io scheduler noop registered
- [ 0.042093] io scheduler deadline registered (default)
- [ 0.044719] bam-dma-engine 8e04000.dma: num-channels unspecified in dt
- [ 0.044739] bam-dma-engine 8e04000.dma: num-ees unspecified in dt
- [ 0.045416] tcsr 1949000.tcsr: setting wifi_glb_cfg = 41000000
- [ 0.045497] tcsr 194b000.tcsr: setting usb hs phy mode select = e700e7
- [ 0.045569] tcsr 1953000.ess_tcsr: setting ess interface select = 0
- [ 0.045641] tcsr 1957000.tcsr: setting wifi_noc_memtype_m0_m2 = 2222222
- [ 0.045861] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
- [ 0.047635] msm_serial 78af000.serial: msm_serial: detected port #0
- [ 0.047681] msm_serial 78af000.serial: uartclk = 1843200
- [ 0.047736] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 25, base_baud = 115200) is a MSM
- [ 0.047763] msm_serial: console setup on port #0
- [ 0.576689] console [ttyMSM0] enabled
- [ 0.581609] msm_serial: driver initialized
- [ 0.589029] loop: module loaded
- [ 0.590162] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
- [ 0.593200] m25p80 spi0.0: mx25l25635f (32768 Kbytes)
- [ 0.599233] mtd: no mtd-id
- [ 0.604289] 14 fixed-partitions partitions found on MTD device spi0.0
- [ 0.606782] Creating 14 MTD partitions on "spi0.0":
- [ 0.613326] 0x000000000000-0x000000040000 : "SBL1"
- [ 0.618641] 0x000000040000-0x000000060000 : "MIBIB"
- [ 0.623424] 0x000000060000-0x0000000c0000 : "QSEE"
- [ 0.628141] 0x0000000c0000-0x0000000d0000 : "CDT"
- [ 0.633078] 0x0000000d0000-0x0000000e0000 : "DDRPARAMS"
- [ 0.637772] 0x0000000e0000-0x000000160000 : "APPSBL"
- [ 0.642876] 0x000000160000-0x000000170000 : "APPSBLENV"
- [ 0.648031] 0x000000170000-0x000000180000 : "ART"
- [ 0.653049] 0x000000180000-0x000000580000 : "kernel"
- [ 0.657828] 0x000000580000-0x000000590000 : "dualflag"
- [ 0.662927] 0x000000590000-0x0000005a0000 : "header"
- [ 0.667817] 0x0000005a0000-0x0000006a0000 : "romd"
- [ 0.672991] 0x0000006a0000-0x0000007a0000 : "not_root_data"
- [ 0.677538] 0x0000007a0000-0x000002000000 : "rootfs"
- [ 0.683041] mtd: device 13 (rootfs) set to be root filesystem
- [ 0.687889] 1 squashfs-split partitions found on MTD device rootfs
- [ 0.693363] 0x000000a00000-0x000002000000 : "rootfs_data"
- [ 0.700758] libphy: ipq40xx_mdio: probed
- [ 0.735631] ESS reset ok!
- [ 0.768608] ESS reset ok!
- [ 0.968700] PHY 2 single test PSGMII issue happen!
- [ 1.172152] PHY2 test see issue!
- [ 1.204271] ESS reset ok!
- [ 1.631017] libphy: Fixed MDIO Bus: probed
- [ 1.632646] EDMA using MAC@ - using
- [ 1.632660] 5e:89:65:f8:c5:2c
- [ 1.730754] i2c /dev entries driver
- [ 1.761687] NET: Registered protocol family 10
- [ 1.763479] Segment Routing with IPv6
- [ 1.765128] NET: Registered protocol family 17
- [ 1.768822] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
- [ 1.773533] 8021q: 802.1Q VLAN Support v1.8
- [ 1.786429] Registering SWP/SWPB emulation handler
- ú[ 1.801117] VFS: Mounted root (squashfs filesystem) readonly on device 31:13.
- [ 1.802687] Freeing unused kernel memory: 1024K
- [ 1.944100] random: fast init done
- [ 2.551522] init: Console is alive
- [ 2.551759] init: - watchdog -
- [ 3.986638] kmodloader: loading kernel modules from /etc/modules-boot.d/*
- [ 4.404089] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 4.404176] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
- [ 4.408701] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f665 hci version 0x100 quirks 0x02010010
- [ 4.416158] xhci-hcd xhci-hcd.0.auto: irq 95, io mem 0x08a00000
- [ 4.425634] hub 1-0:1.0: USB hub found
- [ 4.430698] hub 1-0:1.0: 1 port detected
- [ 4.434840] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
- [ 4.438528] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
- [ 4.443859] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
- [ 4.451518] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 4.458643] hub 2-0:1.0: USB hub found
- [ 4.466461] hub 2-0:1.0: 1 port detected
- [ 4.470259] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 4.473986] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
- [ 4.479479] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f665 hci version 0x100 quirks 0x02010010
- [ 4.486862] xhci-hcd xhci-hcd.1.auto: irq 96, io mem 0x06000000
- [ 4.496064] hub 3-0:1.0: USB hub found
- [ 4.501422] hub 3-0:1.0: 1 port detected
- [ 4.505472] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 4.509267] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
- [ 4.514597] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
- [ 4.522255] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 4.529394] hub 4-0:1.0: USB hub found
- [ 4.537088] hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19)
- [ 4.542667] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
- [ 4.560872] init: - preinit -
- [ 5.199083] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 5.199163] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 5.213524] random: procd: uninitialized urandom read (4 bytes read)
- Press the [f] key and hit [enter] to enter failsafe mode
- Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
- [ 8.798987] jffs2: notice: (157) jffs2_build_xattr_subsystem: complete building xattr subsystem, 7 of xdatum (3 unchecked, 4 orphan) and 63 of xref (4 dead, 3 orphan) found.
- [ 8.812202] mount_root: switching to jffs2 overlay
- [ 8.830047] overlayfs: upper fs does not support tmpfile.
- [ 8.856093] urandom-seed: Seeding with /etc/urandom.seed
- [ 9.854437] random: crng init done
- [ 9.896291] procd: - early -
- [ 9.896404] procd: - watchdog -
- [ 10.590782] procd: - watchdog -
- [ 10.591155] procd: - ubus -
- [ 10.720228] procd: - init -
- Please press Enter to activate this console.
- [ 11.828909] kmodloader: loading kernel modules from /etc/modules.d/*
- [ 11.834423] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 11.840728] Loading modules backported from Linux version v4.19-rc5-0-g6bf4ca7fbc85
- [ 11.840762] Backport generated by backports.git v4.19-rc5-1-0-g05571dcd
- [ 11.849629] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 11.858861] nf_conntrack version 0.5.0 (4096 buckets, 16384 max)
- [ 11.951340] wireguard: WireGuard 0.0.20181018 loaded. See www.wireguard.com for information.
- [ 11.951385] wireguard: Copyright (C) 2015-2018 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
- [ 11.971962] xt_time: kernel timezone is -0000
- [ 11.998931] PPP generic driver version 2.4.2
- [ 11.999960] NET: Registered protocol family 24
- [ 12.193510] ath10k_ahb a000000.wifi: Direct firmware load for ath10k/fwcfg-ahb-a000000.wifi.txt failed with error -2
- [ 12.193563] ath10k_ahb a000000.wifi: Falling back to user helper
- [ 12.252404] firmware ath10k!fwcfg-ahb-a000000.wifi.txt: firmware_loading_store: map pages failed
- [ 12.258053] ath10k_ahb a000000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/ct-firmware-5.bin failed with error -2
- [ 12.260283] ath10k_ahb a000000.wifi: Falling back to user helper
- [ 12.336066] firmware ath10k!QCA4019!hw1.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
- [ 12.336471] ath10k_ahb a000000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/ct-firmware-2.bin failed with error -2
- [ 12.344354] ath10k_ahb a000000.wifi: Falling back to user helper
- [ 12.409179] firmware ath10k!QCA4019!hw1.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
- [ 12.409587] ath10k_ahb a000000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/firmware-6.bin failed with error -2
- [ 12.417478] ath10k_ahb a000000.wifi: Falling back to user helper
- [ 12.481989] firmware ath10k!QCA4019!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
- [ 14.125595] ath10k_ahb a000000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
- [ 14.125641] ath10k_ahb a000000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
- [ 14.177632] ath10k_ahb a000000.wifi: firmware ver 10.4-ct-4019-fW-011-cf79c7f api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,cust-stats-CT crc32 3aa71cb7
- [ 14.248318] ath10k_ahb a000000.wifi: board_file api 2 bmi_id 0:16 crc32 bcebe54c
- [ 15.526802] ath10k_ahb a000000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
- [ 15.526848] ath10k_ahb a000000.wifi: msdu-desc: 2500 skid: 32
- [ 15.573580] ath10k_ahb a000000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0'
- [ 15.574358] ath10k_ahb a000000.wifi: wmi print 'free: 65652 iram: 15164 sram: 43468'
- [ 15.720055] ath10k_ahb a000000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
- [ 15.982509] ath10k_ahb a800000.wifi: Direct firmware load for ath10k/fwcfg-ahb-a800000.wifi.txt failed with error -2
- [ 15.982553] ath10k_ahb a800000.wifi: Falling back to user helper
- [ 16.371246] firmware ath10k!fwcfg-ahb-a800000.wifi.txt: firmware_loading_store: map pages failed
- [ 17.440814] ath10k_ahb a800000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/ct-firmware-5.bin failed with error -2
- [ 17.440868] ath10k_ahb a800000.wifi: Falling back to user helper
- [ 17.491164] firmware ath10k!QCA4019!hw1.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
- [ 17.491435] ath10k_ahb a800000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/ct-firmware-2.bin failed with error -2
- [ 17.499394] ath10k_ahb a800000.wifi: Falling back to user helper
- [ 17.564164] firmware ath10k!QCA4019!hw1.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
- [ 17.564549] ath10k_ahb a800000.wifi: Direct firmware load for ath10k/QCA4019/hw1.0/firmware-6.bin failed with error -2
- [ 17.572453] ath10k_ahb a800000.wifi: Falling back to user helper
- [ 17.643318] firmware ath10k!QCA4019!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
- [ 17.643586] ath10k_ahb a800000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
- [ 17.651245] ath10k_ahb a800000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
- [ 17.663743] ath10k_ahb a800000.wifi: firmware ver 10.4-ct-4019-fW-011-cf79c7f api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,cust-stats-CT crc32 3aa71cb7
- [ 17.712840] ath10k_ahb a800000.wifi: board_file api 2 bmi_id 0:17 crc32 bcebe54c
- [ 18.991223] ath10k_ahb a800000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
- [ 18.991269] ath10k_ahb a800000.wifi: msdu-desc: 2500 skid: 32
- [ 19.038031] ath10k_ahb a800000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0'
- [ 19.039450] ath10k_ahb a800000.wifi: wmi print 'free: 65652 iram: 15164 sram: 43468'
- [ 19.164897] ath10k_ahb a800000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
- [ 19.291560] kmodloader: done loading kernel modules from /etc/modules.d/*
- [ 23.089138] br-lan: port 1(eth0) entered blocking state
- [ 23.089186] br-lan: port 1(eth0) entered disabled state
- [ 23.093587] device eth0 entered promiscuous mode
- [ 23.100965] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
- [ 23.117533] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
- [ 24.161775] br-lan: port 1(eth0) entered blocking state
- [ 24.161830] br-lan: port 1(eth0) entered forwarding state
- [ 24.166216] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
- [ 26.951224] ath10k_ahb a000000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
- [ 26.951270] ath10k_ahb a000000.wifi: msdu-desc: 2500 skid: 32
- [ 26.997028] ath10k_ahb a000000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0'
- [ 26.997857] ath10k_ahb a000000.wifi: wmi print 'free: 65652 iram: 15164 sram: 43468'
- [ 27.259926] ath10k_ahb a000000.wifi: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
- [ 27.260355] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 27.948494] ath10k_ahb a000000.wifi: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000
- [ 28.718642] ath10k_ahb a800000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
- [ 28.718690] ath10k_ahb a800000.wifi: msdu-desc: 2500 skid: 32
- [ 28.765243] ath10k_ahb a800000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0'
- [ 28.766062] ath10k_ahb a800000.wifi: wmi print 'free: 65652 iram: 15164 sram: 43468'
- [ 28.993606] ath10k_ahb a800000.wifi: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
- [ 28.993835] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
- [ 29.006547] br-lan: port 2(wlan0) entered blocking state
- [ 29.009395] br-lan: port 2(wlan0) entered disabled state
- [ 29.015914] device wlan0 entered promiscuous mode
- [ 29.020765] br-lan: port 3(wlan1) entered blocking state
- [ 29.024824] br-lan: port 3(wlan1) entered disabled state
- [ 29.030484] device wlan1 entered promiscuous mode
- [ 41.675333] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 41.675890] br-lan: port 2(wlan0) entered blocking state
- [ 41.680849] br-lan: port 2(wlan0) entered forwarding state
- [ 44.117170] ath10k_ahb a000000.wifi: rate-override: Skipping un-supported device-id, hw-nss: 2 dev-id: 0x0
- [ 44.515701] ath10k_ahb a000000.wifi: rate-override: Skipping un-supported device-id, hw-nss: 2 dev-id: 0x0
- [ 45.092883] ath10k_ahb a000000.wifi: rate-override: Skipping un-supported device-id, hw-nss: 2 dev-id: 0x0
- [ 45.951478] ath10k_ahb a000000.wifi: rate-override: Skipping un-supported device-id, hw-nss: 2 dev-id: 0x0
- [ 47.904650] ath10k_ahb a000000.wifi: rate-override: Skipping un-supported device-id, hw-nss: 2 dev-id: 0x0
- [ 49.931539] ath10k_ahb a000000.wifi: rate-override: Skipping un-supported device-id, hw-nss: 2 dev-id: 0x0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement