Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Copyright (c) 1992-2012 The FreeBSD Project.
- Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
- The Regents of the University of California. All rights reserved.
- FreeBSD is a registered trademark of The FreeBSD Foundation.
- FreeBSD 9.1-RELEASE #2: Tue Nov 27 03:45:16 UTC 2012
- root@darkstar:/usr/obj/pcbsd-build90/fbsd-source/9.1/sys/GENERIC amd64
- CPU: Intel(R) Xeon(R) CPU X5460 @ 3.16GHz (3166.73-MHz K8-class CPU)
- Origin = "GenuineIntel" Id = 0x1067a Family = 6 Model = 17 Stepping = 10
- Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
- Features2=0xc0ce3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,DCA,SSE4.1,XSAVE,OSXSAVE>
- AMD Features=0x20100800<SYSCALL,NX,LM>
- AMD Features2=0x1<LAHF>
- TSC: P-state invariant, performance statistics
- real memory = 4294967296 (4096 MB)
- avail memory = 4084637696 (3895 MB)
- Event timer "LAPIC" quality 400
- ACPI APIC Table: <DELL PE_SC3 >
- FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
- FreeBSD/SMP: 1 package(s) x 4 core(s)
- cpu0 (BSP): APIC ID: 0
- cpu1 (AP): APIC ID: 1
- cpu2 (AP): APIC ID: 2
- cpu3 (AP): APIC ID: 3
- ioapic0: Changing APIC ID to 4
- MADT: Ignoring bogus I/O APIC ID 5ioapic1: Changing APIC ID to 6
- ioapic0 <Version 2.0> irqs 0-23 on motherboard
- ioapic1 <Version 2.0> irqs 64-87 on motherboard
- kbd1 at kbdmux0
- cryptosoft0: <software crypto> on motherboard
- aesni0: No AESNI support.
- acpi0: <DELL PE_SC3> on motherboard
- acpi0: Power Button (fixed)
- cpu0: <ACPI CPU> on acpi0
- cpu1: <ACPI CPU> on acpi0
- cpu2: <ACPI CPU> on acpi0
- cpu3: <ACPI CPU> on acpi0
- atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
- Event timer "RTC" frequency 32768 Hz quality 0
- attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0
- Timecounter "i8254" frequency 1193182 Hz quality 0
- Event timer "i8254" frequency 1193182 Hz quality 100
- hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
- Timecounter "HPET" frequency 14318180 Hz quality 950
- Event timer "HPET" frequency 14318180 Hz quality 450
- Event timer "HPET1" frequency 14318180 Hz quality 440
- Event timer "HPET2" frequency 14318180 Hz quality 440
- Event timer "HPET3" frequency 14318180 Hz quality 440
- Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
- acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
- pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
- pci0: <ACPI PCI bus> on pcib0
- pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
- pci3: <ACPI PCI bus> on pcib1
- mpt0: <LSILogic SAS/SATA Adapter> port 0xec00-0xecff mem 0xdfaec000-0xdfaeffff,0xdfaf0000-0xdfafffff irq 16 at device 0.0 on pci3
- mpt0: MPI Version=1.5.18.0
- mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
- mpt0: 1 Active Volume (2 Max)
- mpt0: 2 Hidden Drive Members (14 Max)
- pcib2: <PCI-PCI bridge> at device 3.0 on pci0
- pci4: <PCI bus> on pcib2
- pcib3: <ACPI PCI-PCI bridge> at device 4.0 on pci0
- pci5: <ACPI PCI bus> on pcib3
- pcib4: <ACPI PCI-PCI bridge> at device 5.0 on pci0
- pci6: <ACPI PCI bus> on pcib4
- pcib5: <ACPI PCI-PCI bridge> at device 6.0 on pci0
- pci7: <ACPI PCI bus> on pcib5
- pcib6: <PCI-PCI bridge> at device 0.0 on pci7
- pci8: <PCI bus> on pcib6
- mpt1: <LSILogic SAS/SATA Adapter> port 0xdc00-0xdcff mem 0xdfcec000-0xdfceffff,0xdfcf0000-0xdfcfffff irq 16 at device 8.0 on pci8
- mpt1: MPI Version=1.5.13.0
- pcib7: <ACPI PCI-PCI bridge> at device 7.0 on pci0
- pci9: <ACPI PCI bus> on pcib7
- pcib8: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
- pci10: <ACPI PCI bus> on pcib8
- pcib9: <ACPI PCI-PCI bridge> at device 0.0 on pci10
- pci11: <ACPI PCI bus> on pcib9
- pcib10: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
- pci1: <ACPI PCI bus> on pcib10
- pci0:1:0:0: failed to read VPD data.
- bge0: <Broadcom BCM5722 A0, ASIC rev. 0x00a200> mem 0xdfdf0000-0xdfdfffff irq 16 at device 0.0 on pci1
- bge0: CHIP ID 0x0000a200; ASIC REV 0x0a; CHIP REV 0xa2; PCI-E
- miibus0: <MII bus> on bge0
- brgphy0: <BCM5722 1000BASE-T media interface> PHY 1 on miibus0
- brgphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
- bge0: Ethernet address: 00:24:e8:60:7d:83
- pcib11: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
- pci2: <ACPI PCI bus> on pcib11
- bge1: <Broadcom NetXtreme Gigabit Ethernet Controller, ASIC rev. 0x00a200> mem 0xdfef0000-0xdfefffff irq 17 at device 0.0 on pci2
- bge1: CHIP ID 0x0000a200; ASIC REV 0x0a; CHIP REV 0xa2; PCI-E
- miibus1: <MII bus> on bge1
- brgphy1: <BCM5722 1000BASE-T media interface> PHY 1 on miibus1
- brgphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
- bge1: Ethernet address: 00:24:e8:60:7d:84
- uhci0: <Intel 82801I (ICH9) USB controller> port 0xbc80-0xbc9f irq 21 at device 29.0 on pci0
- usbus0 on uhci0
- uhci1: <Intel 82801I (ICH9) USB controller> port 0xbca0-0xbcbf irq 20 at device 29.1 on pci0
- usbus1 on uhci1
- uhci2: <Intel 82801I (ICH9) USB controller> port 0xbcc0-0xbcdf irq 21 at device 29.2 on pci0
- usbus2 on uhci2
- uhci3: <Intel 82801I (ICH9) USB controller> port 0xbce0-0xbcff irq 20 at device 29.3 on pci0
- usbus3 on uhci3
- ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xdf8ffc00-0xdf8fffff irq 21 at device 29.7 on pci0
- usbus4: EHCI version 1.0
- usbus4 on ehci0
- pcib12: <ACPI PCI-PCI bridge> at device 30.0 on pci0
- pci12: <ACPI PCI bus> on pcib12
- vgapci0: <VGA-compatible display> port 0xcc00-0xccff mem 0xd0000000-0xd7ffffff,0xdfff0000-0xdfffffff irq 19 at device 7.0 on pci12
- isab0: <PCI-ISA bridge> at device 31.0 on pci0
- isa0: <ISA bus> on isab0
- atapci0: <Intel ICH9 SATA300 controller> port 0xbc20-0xbc27,0xbc10-0xbc13,0xbc28-0xbc2f,0xbc14-0xbc17,0xbc40-0xbc4f,0xbc50-0xbc5f irq 23 at device 31.2 on pci0
- ata2: <ATA channel> at channel 0 on atapci0
- ata3: <ATA channel> at channel 1 on atapci0
- atapci1: <Intel ICH9 SATA300 controller> port 0xbc30-0xbc37,0xbc18-0xbc1b,0xbc38-0xbc3f,0xbc1c-0xbc1f,0xbc60-0xbc6f,0xbc70-0xbc7f irq 22 at device 31.5 on pci0
- ata4: <ATA channel> at channel 0 on atapci1
- ata5: <ATA channel> at channel 1 on atapci1
- fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
- fdc0: does not respond
- device_attach: fdc0 attach returned 6
- uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
- uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
- orm0: <ISA Option ROMs> at iomem 0xc0000-0xc8fff,0xc9000-0xc9fff,0xca000-0xcbfff,0xec000-0xeffff on isa0
- sc0: <System console> at flags 0x100 on isa0
- sc0: VGA <16 virtual consoles, flags=0x300>
- vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
- atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
- atkbd0: <AT Keyboard> irq 1 on atkbdc0
- kbd0 at atkbd0
- atkbd0: [GIANT-LOCKED]
- fdc0: No FDOUT register!
- ppc0: cannot reserve I/O port range
- ctl: CAM Target Layer loaded
- est0: <Enhanced SpeedStep Frequency Control> on cpu0
- est: CPU supports Enhanced Speedstep, but is not recognized.
- est: cpu_vendor GenuineIntel, msr 4921492106004921
- device_attach: est0 attach returned 6
- p4tcc0: <CPU Frequency Thermal Control> on cpu0
- est1: <Enhanced SpeedStep Frequency Control> on cpu1
- est: CPU supports Enhanced Speedstep, but is not recognized.
- est: cpu_vendor GenuineIntel, msr 4921492106004921
- device_attach: est1 attach returned 6
- p4tcc1: <CPU Frequency Thermal Control> on cpu1
- est2: <Enhanced SpeedStep Frequency Control> on cpu2
- est: CPU supports Enhanced Speedstep, but is not recognized.
- est: cpu_vendor GenuineIntel, msr 4921492106004921
- device_attach: est2 attach returned 6
- p4tcc2: <CPU Frequency Thermal Control> on cpu2
- est3: <Enhanced SpeedStep Frequency Control> on cpu3
- est: CPU supports Enhanced Speedstep, but is not recognized.
- est: cpu_vendor GenuineIntel, msr 4921492106004921
- device_attach: est3 attach returned 6
- p4tcc3: <CPU Frequency Thermal Control> on cpu3
- ZFS filesystem version 5
- ZFS storage pool version 28
- Timecounters tick every 10.000 msec
- usbus0: 12Mbps Full Speed USB v1.0
- usbus1: 12Mbps Full Speed USB v1.0
- usbus2: 12Mbps Full Speed USB v1.0
- usbus3: 12Mbps Full Speed USB v1.0
- usbus4: 480Mbps High Speed USB v2.0
- ugen0.1: <Intel> at usbus0
- uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
- ugen1.1: <Intel> at usbus1
- uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
- ugen2.1: <Intel> at usbus2
- uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
- ugen3.1: <Intel> at usbus3
- uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
- ugen4.1: <Intel> at usbus4
- uhub4: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
- uhub0: 2 ports with 2 removable, self powered
- uhub1: 2 ports with 2 removable, self powered
- uhub2: 2 ports with 2 removable, self powered
- uhub3: 2 ports with 2 removable, self powered
- mpt0:vol0(mpt0:0:0): Settings ( Member-WCE Hot-Plug-Spares High-Priority-ReSync )
- mpt0:vol0(mpt0:0:0): Using Spare Pool: 0
- mpt0:vol0(mpt0:0:0): 2 Members:
- (mpt0:1:8:0): Primary Online
- (mpt0:1:1:0): Secondary Online
- mpt0:vol0(mpt0:0:0): RAID-1 - Optimal
- mpt0:vol0(mpt0:0:0): Status ( Enabled )
- (mpt0:vol0:1): Physical (mpt0:0:1:0), Pass-thru (mpt0:1:0:0)
- (mpt0:vol0:1): Online
- (mpt0:vol0:0): Physical (mpt0:0:8:0), Pass-thru (mpt0:1:1:0)
- (mpt0:vol0:0): Online
- (probe64:mpt0:1:1:0): INQUIRY. CDB: 12 0 0 0 24 0
- (probe64:mpt0:1:1:0): CAM status: Unrecoverable Host Bus Adapter Error
- (probe64:mpt0:1:1:0): Retrying command
- (probe64:mpt0:1:1:0): INQUIRY. CDB: 12 0 0 0 24 0
- (probe64:mpt0:1:1:0): CAM status: Unrecoverable Host Bus Adapter Error
- (probe64:mpt0:1:1:0): Retrying command
- (probe0:mpt0:0:0:0): REPORT LUNS. CDB: a0 0 0 0 0 0 0 0 0 10 0 0
- (probe0:mpt0:0:0:0): CAM status: SCSI Status Error
- (probe0:mpt0:0:0:0): SCSI status: Check Condition
- (probe0:mpt0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:ffffffff,ffffffff (Reserved ASC/ASCQ pair)
- (probe0:mpt0:0:0:0): Error 22, Unretryable error
- (probe64:mpt0:1:1:0): INQUIRY. CDB: 12 0 0 0 24 0
- (probe64:mpt0:1:1:0): CAM status: Unrecoverable Host Bus Adapter Error
- (probe64:mpt0:1:1:0): Retrying command
- (probe64:mpt0:1:1:0): INQUIRY. CDB: 12 0 0 0 24 0
- (probe64:mpt0:1:1:0): CAM status: Unrecoverable Host Bus Adapter Error
- (probe64:mpt0:1:1:0): Retrying command
- (probe64:mpt0:1:1:0): INQUIRY. CDB: 12 0 0 0 24 0
- (probe64:mpt0:1:1:0): CAM status: Unrecoverable Host Bus Adapter Error
- (probe64:mpt0:1:1:0): Error 5, Retries exhausted
- (probe64:mpt0:1:1:0): INQUIRY. CDB: 12 0 0 0 24 0
- (probe64:mpt0:1:1:0): CAM status: Unrecoverable Host Bus Adapter Error
- (probe64:mpt0:1:1:0): Retrying command
- (probe64:mpt0:1:1:0): INQUIRY. CDB: 12 0 0 0 24 0
- (probe64:mpt0:1:1:0): CAM status: Unrecoverable Host Bus Adapter Error
- (probe64:mpt0:1:1:0): Retrying command
- (probe64:mpt0:1:1:0): INQUIRY. CDB: 12 0 0 0 24 0
- (probe64:mpt0:1:1:0): CAM status: Unrecoverable Host Bus Adapter Error
- (probe64:mpt0:1:1:0): Retrying command
- (probe64:mpt0:1:1:0): INQUIRY. CDB: 12 0 0 0 24 0
- (probe64:mpt0:1:1:0): CAM status: Unrecoverable Host Bus Adapter Error
- (probe64:mpt0:1:1:0): Retrying command
- (probe64:mpt0:1:1:0): INQUIRY. CDB: 12 0 0 0 24 0
- (probe64:mpt0:1:1:0): CAM status: Unrecoverable Host Bus Adapter Error
- (probe64:mpt0:1:1:0): Error 5, Retries exhausted
- pass1 at mpt0 bus 1 scbus1 target 0 lun 0
- pass1: <ATA ST3500320NS MA08> Fixed Uninstalled SCSI-5 device
- pass1: 300.000MB/s transfers
- pass1: Command Queueing enabled
- da0 at mpt0 bus 0 scbus0 target 0 lun 0
- da0: <Dell VIRTUAL DISK 1028> Fixed Direct Access SCSI-5 device
- cd0 at ata4 bus 0 scbus5 target 0 lun 0
- cd0: <HL-DT-ST DVD-ROM DH10N 0D09> Removable CD-ROM SCSI-0 device
- cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
- cd0: cd present [1881472 x 2048 byte records]
- da0: 300.000MB/s transfers
- da0: Command Queueing enabled
- da0: 476416MB (975699968 512 byte sectors: 255H 63S/T 60734C)
- SMP: AP CPU #3 Launched!
- SMP: AP CPU #1 Launched!
- SMP: AP CPU #2 Launched!
- uhub4: 8 ports with 8 removable, self powered
- ugen4.2: <vendor 0x04b4> at usbus4
- uhub5: <vendor 0x04b4 product 0x6560, class 9/0, rev 2.00/90.15, addr 2> on usbus4
- uhub5: 2 ports with 2 removable, self powered
- ugen4.3: <vendor 0x0430> at usbus4
- uhub6: <vendor 0x0430 product 0x100e, class 9/0, rev 2.00/1.04, addr 3> on usbus4
- Root mount waiting for: usbus4
- uhub6: 4 ports with 3 removable, bus powered
- Root mount waiting for: usbus4
- ugen4.4: <Microsoft> at usbus4
- ums0: <Microsoft Microsoft 3-Button Mouse with IntelliEyeTM, class 0/0, rev 1.10/3.00, addr 4> on usbus4
- ums0: 3 buttons and [XYZ] coordinates ID=0
- Root mount waiting for: usbus4
- ugen4.5: <vendor 0x0430> at usbus4
- ukbd0: <vendor 0x0430 Sun USB Keyboard, class 0/0, rev 2.00/1.04, addr 5> on usbus4
- kbd2 at ukbd0
- Trying to mount root from zfs:tank0/ROOT/default []...
- Setting hostuuid: 44454c4c-3800-1036-8050-b3c04f364b31.
- Setting hostid: 0xf2a103ca.
- Entropy harvesting: interrupts ethernet point_to_point kickstart.
- Starting file system checks:
- Mounting local file systems:.
- Starting Network: lo0.
- lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
- options=600003<RXCSUM,TXCSUM,RXCSUM_IPV6,TXCSUM_IPV6>
- inet6 ::1 prefixlen 128
- inet6 fe80::1%lo0 prefixlen 64 scopeid 0x8
- inet 127.0.0.1 netmask 0xff000000
- nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
- Setting hostname: pcbsd-7293.
- Setting hostuuid: 44454c4c-3800-1036-8050-b3c04f364b31.
- Setting hostid: 0xf2a103ca.
- ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg /usr/local/lib/compat/pkg /usr/local/lib/gcc46 /usr/local/lib/nss /usr/local/lib/pth /usr/local/lib/qt4
- 32-bit compatibility ldconfig path: /usr/lib32
- swapon: /dev/zvol/tank0/swap: device already in use
- Clearing /tmp.
- Starting default mousedmoused: unable to open /dev/psm0: No such file or directory
- .
- Starting pefs...
- Starting dbus.
- Starting hald.
- Starting gdm.
- Starting ums0 moused.
- Thu Mar 21 16:13:24 EDT 2013
- Cuse4BSD v0.1.27 @ /dev/cuse
- fdc0: No FDOUT register!
- ppc0: cannot reserve I/O port range
- SGI XFS with large block numbers, tracing, no debug enabled
- WARNING: attempt to domain_add(bluetooth) after domainfinalize()
- fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.19
- Mar 21 12:21:00 pcbsd-7293 gnome-keyring-daemon[2721]: couldn't allocate secure memory to keep passwords and or keys from being written to the disk
- Mar 21 12:21:01 pcbsd-7293 gnome-keyring-daemon[2723]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
- Mar 21 12:21:01 pcbsd-7293 gnome-keyring-daemon[2723]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
- Mar 21 12:21:02 pcbsd-7293 gnome-keyring-daemon[2723]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
- Mar 21 12:21:02 pcbsd-7293 pulseaudio[2848]: module.c: Failed to load module "module-detect" (argument: ""): initialization failed.
- Mar 21 12:21:02 pcbsd-7293 pulseaudio[2848]: main.c: Module load failed.
- Mar 21 12:21:02 pcbsd-7293 pulseaudio[2848]: main.c: Failed to initialize daemon.
- WARNING pid 2888 (python2.7): ioctl sign-extension ioctl ffffffff80087467
- WARNING pid 2897 (python2.7): ioctl sign-extension ioctl ffffffff80087467
- pid 2813 (pcmanfm), uid 1001: exited on signal 11
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement