Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- wpa_supplicant -iwlwifi -iwlp9s0 -C/var/run/wpa_supplicant/ -c/etc/wpa_supplicant/wpa_supplicant.conf -dd
- wpa_supplicant v2.4
- random: Trying to read entropy from /dev/random
- Successfully initialized wpa_supplicant
- Initializing interface 'wlp9s0' conf '/etc/wpa_supplicant/wpa_supplicant.conf' driver 'default' ctrl_interface '/var/run/wpa_supplicant/' bridge 'N/A'
- Configuration file '/etc/wpa_supplicant/wpa_supplicant.conf' -> '/etc/wpa_supplicant/wpa_supplicant.conf'
- Reading configuration file '/etc/wpa_supplicant/wpa_supplicant.conf'
- ctrl_interface='DIR=/var/run/wpa_supplicant GROUP=wheel'
- update_config=1
- Line: 4 - start of a new network block
- ssid - hexdump_ascii(len=15):
- 44 4f 20 4e 4f 54 20 55 53 45 20 4e 55 42 5a DO NOT USE NUBZ
- PSK (ASCII passphrase) - hexdump_ascii(len=24): [REMOVED]
- proto: 0x1
- key_mgmt: 0x2
- pairwise: 0x10
- auth_alg: 0x1
- PSK (from passphrase) - hexdump(len=32): [REMOVED]
- Priority group 0
- id=0 ssid='DO NOT USE NUBZ'
- rfkill: initial event: idx=0 type=2 op=0 soft=0 hard=0
- rfkill: initial event: idx=1 type=1 op=0 soft=0 hard=0
- nl80211: Supported cipher 00-0f-ac:4
- nl80211: Supported cipher 00-0f-ac:2
- nl80211: Supported cipher 00-0f-ac:1
- nl80211: Supported cipher 00-0f-ac:5
- nl80211: Supported cipher 00-0f-ac:6
- nl80211: Supported cipher 00-14-72:1
- nl80211: Using driver-based off-channel TX
- nl80211: Use separate P2P group interface (driver advertised support)
- nl80211: use P2P_DEVICE support
- nl80211: interface wlp9s0 in phy phy0
- nl80211: Set mode ifindex 4 iftype 2 (STATION)
- nl80211: Subscribe to mgmt frames with non-AP handle 0x194f4a0
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x194f4a0 match=0104
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 01 04
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x194f4a0 match=040a
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 04 0a
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x194f4a0 match=040b
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 04 0b
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x194f4a0 match=040c
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 04 0c
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x194f4a0 match=040d
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 04 0d
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x194f4a0 match=090a
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 09 0a
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x194f4a0 match=090b
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 09 0b
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x194f4a0 match=090c
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 09 0c
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x194f4a0 match=090d
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 09 0d
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x194f4a0 match=0801
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 08 01
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x194f4a0 match=06
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=1): 06
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x194f4a0 match=0a07
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 0a 07
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x194f4a0 match=0a11
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 0a 11
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x194f4a0 match=0a1a
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 0a 1a
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x194f4a0 match=1101
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 11 01
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x194f4a0 match=1102
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 11 02
- nl80211: Register frame type=0xd0 (WLAN_FC_STYPE_ACTION) nl_handle=0x194f4a0 match=0505
- nl80211: Register frame command failed (type=208): ret=-114 (Operation already in progress)
- nl80211: Register frame match - hexdump(len=2): 05 05
- nl80211: Failed to register Action frame processing - ignore for now
- netlink: Operstate: ifindex=4 linkmode=1 (userspace-control), operstate=5 (IF_OPER_DORMANT)
- nl80211: driver param='(null)'
- Add interface wlp9s0 to a new radio phy0
- nl80211: Regulatory information - country=00
- nl80211: 2402-2472 @ 40 MHz 20 mBm
- nl80211: 2457-2482 @ 40 MHz 20 mBm (no IR)
- nl80211: 2474-2494 @ 20 MHz 20 mBm (no OFDM) (no IR)
- nl80211: 5170-5250 @ 160 MHz 20 mBm (no IR)
- nl80211: 5250-5330 @ 160 MHz 20 mBm (DFS) (no IR)
- nl80211: 5490-5730 @ 160 MHz 20 mBm (DFS) (no IR)
- nl80211: Added 802.11b mode based on 802.11g information
- wlp9s0: Own MAC address: fc:f8:ae:16:23:76
- wpa_driver_nl80211_set_key: ifindex=4 (wlp9s0) alg=0 addr=(nil) key_idx=0 set_tx=0 seq_len=0 key_len=0
- wpa_driver_nl80211_set_key: ifindex=4 (wlp9s0) alg=0 addr=(nil) key_idx=1 set_tx=0 seq_len=0 key_len=0
- wpa_driver_nl80211_set_key: ifindex=4 (wlp9s0) alg=0 addr=(nil) key_idx=2 set_tx=0 seq_len=0 key_len=0
- wpa_driver_nl80211_set_key: ifindex=4 (wlp9s0) alg=0 addr=(nil) key_idx=3 set_tx=0 seq_len=0 key_len=0
- wpa_driver_nl80211_set_key: ifindex=4 (wlp9s0) alg=0 addr=(nil) key_idx=4 set_tx=0 seq_len=0 key_len=0
- wpa_driver_nl80211_set_key: ifindex=4 (wlp9s0) alg=0 addr=(nil) key_idx=5 set_tx=0 seq_len=0 key_len=0
- wlp9s0: RSN: flushing PMKID list in the driver
- nl80211: Flush PMKIDs
- ENGINE: Loading dynamic engine
- ENGINE: Loading dynamic engine
- EAPOL: SUPP_PAE entering state DISCONNECTED
- EAPOL: Supplicant port status: Unauthorized
- nl80211: Skip set_supp_port(unauthorized) while not associated
- EAPOL: KEY_RX entering state NO_KEY_RECEIVE
- EAPOL: SUPP_BE entering state INITIALIZE
- EAP: EAP entering state DISABLED
- wlp9s0: Added interface wlp9s0
- wlp9s0: State: DISCONNECTED -> DISCONNECTED
- nl80211: Set wlp9s0 operstate 0->0 (DORMANT)
- netlink: Operstate: ifindex=4 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
- random: Got 20/20 bytes from /dev/random
- wlp9s0: Starting delayed sched scan
- wlp9s0: Use normal scan instead of sched_scan for initial scans (normal_scans=0)
- wlp9s0: Setting scan request: 0.000000 sec
- wlp9s0: State: DISCONNECTED -> SCANNING
- wlp9s0: Starting AP scan for wildcard SSID
- wlp9s0: Add radio work 'scan'@0x196b160
- wlp9s0: First radio work item in the queue - schedule start immediately
- wlp9s0: Starting radio work 'scan'@0x196b160 after 0.000010 second wait
- wlp9s0: nl80211: scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- Scan requested (ret=0) - scan timeout 10 seconds
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp9s0
- wlp9s0: nl80211: Scan trigger
- wlp9s0: Event SCAN_STARTED (47) received
- wlp9s0: Own scan request started a scan in 0.000034 seconds
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp9s0
- wlp9s0: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472
- wlp9s0: Event SCAN_RESULTS (3) received
- wlp9s0: Scan completed in 0.577972 seconds
- nl80211: Received scan results (5 BSSes)
- wlp9s0: BSS: Start scan result update 1
- wlp9s0: BSS: Add new id 0 BSSID 90:f6:52:82:df:b7 SSID 'DO NOT USE NUBZ'
- wlp9s0: BSS: Add new id 1 BSSID d8:fe:e3:48:30:ed SSID 'Random SSID 1'
- wlp9s0: BSS: Add new id 2 BSSID 58:7f:66:39:aa:90 SSID 'Random SSID 2'
- wlp9s0: BSS: Add new id 3 BSSID d8:5d:4c:a4:3d:9d SSID 'Random SSID 3'
- wlp9s0: BSS: Add new id 4 BSSID 9c:c1:72:f8:35:50 SSID 'Random SSID 4'
- BSS: last_scan_res_used=5/32
- wlp9s0: New scan results available (own=1 ext=0)
- wlp9s0: Radio work 'scan'@0x196b160 done in 0.578514 seconds
- wlp9s0: Selecting BSS from priority group 0
- wlp9s0: 0: 90:f6:52:82:df:b7 ssid='DO NOT USE NUBZ' wpa_ie_len=0 rsn_ie_len=24 caps=0x411 level=-43 wps
- wlp9s0: skip - no WPA/RSN proto match
- wlp9s0: 1: d8:fe:e3:48:30:ed ssid='Random SSID 1' wpa_ie_len=28 rsn_ie_len=24 caps=0x411 level=-85
- wlp9s0: skip - SSID mismatch
- wlp9s0: 2: 58:7f:66:39:aa:90 ssid='Random SSID 2' wpa_ie_len=22 rsn_ie_len=0 caps=0x411 level=-88
- wlp9s0: skip - SSID mismatch
- wlp9s0: 3: d8:5d:4c:a4:3d:9d ssid='Random SSID 3' wpa_ie_len=22 rsn_ie_len=20 caps=0x431 level=-85
- wlp9s0: skip - SSID mismatch
- wlp9s0: 4: 9c:c1:72:f8:35:50 ssid='Random SSID 4' wpa_ie_len=22 rsn_ie_len=20 caps=0x431 level=-92
- wlp9s0: skip - SSID mismatch
- wlp9s0: No suitable network found
- wlp9s0: Use normal scan instead of sched_scan for initial scans (normal_scans=1)
- wlp9s0: Setting scan request: 5.000000 sec
- RTM_NEWLINK: ifi_index=4 ifname=wlp9s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- EAPOL: disable timer tick
- wlp9s0: Starting AP scan for wildcard SSID
- wlp9s0: Add radio work 'scan'@0x196b160
- wlp9s0: First radio work item in the queue - schedule start immediately
- wlp9s0: Starting radio work 'scan'@0x196b160 after 0.000009 second wait
- wlp9s0: nl80211: scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- Scan requested (ret=0) - scan timeout 30 seconds
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp9s0
- wlp9s0: nl80211: Scan trigger
- wlp9s0: Event SCAN_STARTED (47) received
- wlp9s0: Own scan request started a scan in 0.000023 seconds
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp9s0
- wlp9s0: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472
- wlp9s0: Event SCAN_RESULTS (3) received
- wlp9s0: Scan completed in 0.577816 seconds
- nl80211: Received scan results (7 BSSes)
- wlp9s0: BSS: Start scan result update 2
- wlp9s0: BSS: Add new id 5 BSSID 70:9f:2d:81:06:84 SSID 'Random SSID 5'
- wlp9s0: BSS: Add new id 6 BSSID f8:01:13:eb:fc:58 SSID 'Random SSID 6'
- BSS: last_scan_res_used=7/32
- wlp9s0: New scan results available (own=1 ext=0)
- wlp9s0: Radio work 'scan'@0x196b160 done in 0.578347 seconds
- wlp9s0: Selecting BSS from priority group 0
- wlp9s0: 0: 90:f6:52:82:df:b7 ssid='DO NOT USE NUBZ' wpa_ie_len=0 rsn_ie_len=24 caps=0x411 level=-41 wps
- wlp9s0: skip - no WPA/RSN proto match
- wlp9s0: 1: 70:9f:2d:81:06:84 ssid='Random SSID 5' wpa_ie_len=26 rsn_ie_len=24 caps=0x411 level=-68 wps
- wlp9s0: skip - SSID mismatch
- wlp9s0: 2: d8:fe:e3:48:30:ed ssid='Random SSID 1' wpa_ie_len=28 rsn_ie_len=24 caps=0x411 level=-85
- wlp9s0: skip - SSID mismatch
- wlp9s0: 3: 58:7f:66:39:aa:90 ssid='Random SSID 2' wpa_ie_len=22 rsn_ie_len=0 caps=0x411 level=-88
- wlp9s0: skip - SSID mismatch
- wlp9s0: 4: d8:5d:4c:a4:3d:9d ssid='Random SSID 3' wpa_ie_len=22 rsn_ie_len=20 caps=0x431 level=-88
- wlp9s0: skip - SSID mismatch
- wlp9s0: 5: f8:01:13:eb:fc:58 ssid='Random SSID 6' wpa_ie_len=22 rsn_ie_len=0 caps=0x431 level=-88
- wlp9s0: skip - SSID mismatch
- wlp9s0: 6: 9c:c1:72:f8:35:50 ssid='Random SSID 4' wpa_ie_len=22 rsn_ie_len=20 caps=0x431 level=-92
- wlp9s0: skip - SSID mismatch
- wlp9s0: No suitable network found
- wlp9s0: Use normal scan instead of sched_scan for initial scans (normal_scans=2)
- wlp9s0: Setting scan request: 5.000000 sec
- RTM_NEWLINK: ifi_index=4 ifname=wlp9s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- wlp9s0: Starting AP scan for wildcard SSID
- wlp9s0: Add radio work 'scan'@0x196b160
- wlp9s0: First radio work item in the queue - schedule start immediately
- wlp9s0: Starting radio work 'scan'@0x196b160 after 0.000007 second wait
- wlp9s0: nl80211: scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- Scan requested (ret=0) - scan timeout 30 seconds
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp9s0
- wlp9s0: nl80211: Scan trigger
- wlp9s0: Event SCAN_STARTED (47) received
- wlp9s0: Own scan request started a scan in 0.000020 seconds
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp9s0
- wlp9s0: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472
- wlp9s0: Event SCAN_RESULTS (3) received
- wlp9s0: Scan completed in 0.577890 seconds
- nl80211: Received scan results (7 BSSes)
- wlp9s0: BSS: Start scan result update 3
- BSS: last_scan_res_used=7/32
- wlp9s0: New scan results available (own=1 ext=0)
- wlp9s0: Radio work 'scan'@0x196b160 done in 0.578362 seconds
- wlp9s0: Selecting BSS from priority group 0
- wlp9s0: 0: 90:f6:52:82:df:b7 ssid='DO NOT USE NUBZ' wpa_ie_len=0 rsn_ie_len=24 caps=0x411 level=-40 wps
- wlp9s0: skip - no WPA/RSN proto match
- wlp9s0: 1: 70:9f:2d:81:06:84 ssid='Random SSID 5' wpa_ie_len=26 rsn_ie_len=24 caps=0x411 level=-68 wps
- wlp9s0: skip - SSID mismatch
- wlp9s0: 2: d8:fe:e3:48:30:ed ssid='Random SSID 1' wpa_ie_len=28 rsn_ie_len=24 caps=0x411 level=-85
- wlp9s0: skip - SSID mismatch
- wlp9s0: 3: 58:7f:66:39:aa:90 ssid='Random SSID 2' wpa_ie_len=22 rsn_ie_len=0 caps=0x411 level=-88
- wlp9s0: skip - SSID mismatch
- wlp9s0: 4: d8:5d:4c:a4:3d:9d ssid='Random SSID 3' wpa_ie_len=22 rsn_ie_len=20 caps=0x431 level=-87
- wlp9s0: skip - SSID mismatch
- wlp9s0: 5: 9c:c1:72:f8:35:50 ssid='Random SSID 4' wpa_ie_len=22 rsn_ie_len=20 caps=0x431 level=-87
- wlp9s0: skip - SSID mismatch
- wlp9s0: 6: f8:01:13:eb:fc:58 ssid='Random SSID 6' wpa_ie_len=22 rsn_ie_len=0 caps=0x431 level=-88
- wlp9s0: skip - SSID mismatch
- wlp9s0: No suitable network found
- wlp9s0: Beginning of SSID list
- wlp9s0: Add wildcard SSID to sched_scan
- wlp9s0: add to filter ssid: DO NOT USE NUBZ
- wlp9s0: Starting sched scan: interval 10 (no timeout)
- wlp9s0: nl80211: sched_scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- nl80211: Sched scan filter SSID - hexdump_ascii(len=15):
- 44 4f 20 4e 4f 54 20 55 53 45 20 4e 55 42 5a DO NOT USE NUBZ
- nl80211: Sched scan requested (ret=0) - scan interval 10000 msec
- RTM_NEWLINK: ifi_index=4 ifname=wlp9s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Event message available
- nl80211: Drv Event 75 (NL80211_CMD_START_SCHED_SCAN) received for wlp9s0
- wlp9s0: nl80211: Sched scan started
- nl80211: Event message available
- nl80211: Drv Event 77 (NL80211_CMD_SCHED_SCAN_RESULTS) received for wlp9s0
- wlp9s0: nl80211: New sched scan results available
- wlp9s0: Event SCAN_RESULTS (3) received
- nl80211: Received scan results (1 BSSes)
- wlp9s0: BSS: Start scan result update 4
- BSS: last_scan_res_used=1/32
- wlp9s0: New scan results available (own=0 ext=0)
- wlp9s0: Selecting BSS from priority group 0
- wlp9s0: 0: 90:f6:52:82:df:b7 ssid='DO NOT USE NUBZ' wpa_ie_len=0 rsn_ie_len=24 caps=0x411 level=-41 wps
- wlp9s0: skip - no WPA/RSN proto match
- wlp9s0: No suitable network found
- wlp9s0: Already sched scanning
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp9s0
- wlp9s0: nl80211: Scan trigger
- wlp9s0: Event SCAN_STARTED (47) received
- wlp9s0: External program started a scan
- nl80211: Event message available
- nl80211: Drv Event 78 (NL80211_CMD_SCHED_SCAN_STOPPED) received for wlp9s0
- wlp9s0: nl80211: Sched scan stopped
- wlp9s0: Event SCHED_SCAN_STOPPED (36) received
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp9s0
- wlp9s0: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472
- wlp9s0: Event SCAN_RESULTS (3) received
- wlp9s0: Scan completed in 0.577847 seconds
- nl80211: Received scan results (1 BSSes)
- wlp9s0: BSS: Start scan result update 5
- wlp9s0: BSS: Remove id 5 BSSID 70:9f:2d:81:06:84 SSID 'Random SSID 5' due to no match in scan
- wlp9s0: BSS: Remove id 1 BSSID d8:fe:e3:48:30:ed SSID 'Random SSID 1' due to no match in scan
- wlp9s0: BSS: Remove id 2 BSSID 58:7f:66:39:aa:90 SSID 'Random SSID 2' due to no match in scan
- wlp9s0: BSS: Remove id 3 BSSID d8:5d:4c:a4:3d:9d SSID 'Random SSID 3' due to no match in scan
- wlp9s0: BSS: Remove id 4 BSSID 9c:c1:72:f8:35:50 SSID 'Random SSID 4' due to no match in scan
- wlp9s0: BSS: Remove id 6 BSSID f8:01:13:eb:fc:58 SSID 'Random SSID 6' due to no match in scan
- BSS: last_scan_res_used=1/32
- wlp9s0: New scan results available (own=0 ext=1)
- wlp9s0: Do not use results from externally requested scan operation for network selection
- RTM_NEWLINK: ifi_index=4 ifname=wlp9s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp9s0
- wlp9s0: nl80211: Scan trigger
- wlp9s0: Event SCAN_STARTED (47) received
- wlp9s0: External program started a scan
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp9s0
- wlp9s0: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472
- wlp9s0: Event SCAN_RESULTS (3) received
- wlp9s0: Scan completed in 0.577851 seconds
- nl80211: Received scan results (0 BSSes)
- wlp9s0: BSS: Start scan result update 6
- BSS: last_scan_res_used=0/32
- wlp9s0: New scan results available (own=0 ext=1)
- wlp9s0: Do not use results from externally requested scan operation for network selection
- RTM_NEWLINK: ifi_index=4 ifname=wlp9s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Event message available
- nl80211: Drv Event 75 (NL80211_CMD_START_SCHED_SCAN) received for wlp9s0
- wlp9s0: nl80211: Sched scan started
- nl80211: Event message available
- nl80211: Drv Event 77 (NL80211_CMD_SCHED_SCAN_RESULTS) received for wlp9s0
- wlp9s0: nl80211: New sched scan results available
- wlp9s0: Event SCAN_RESULTS (3) received
- nl80211: Received scan results (1 BSSes)
- wlp9s0: BSS: Start scan result update 7
- BSS: last_scan_res_used=1/32
- wlp9s0: New scan results available (own=0 ext=0)
- wlp9s0: Selecting BSS from priority group 0
- wlp9s0: 0: 90:f6:52:82:df:b7 ssid='DO NOT USE NUBZ' wpa_ie_len=0 rsn_ie_len=24 caps=0x411 level=-57 wps
- wlp9s0: skip - no WPA/RSN proto match
- wlp9s0: No suitable network found
- wlp9s0: Beginning of SSID list
- wlp9s0: Add wildcard SSID to sched_scan
- wlp9s0: add to filter ssid: DO NOT USE NUBZ
- wlp9s0: Starting sched scan: interval 10 (no timeout)
- wlp9s0: nl80211: sched_scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- nl80211: Sched scan filter SSID - hexdump_ascii(len=15):
- 44 4f 20 4e 4f 54 20 55 53 45 20 4e 55 42 5a DO NOT USE NUBZ
- nl80211: Sched scan start failed: ret=-115 (Operation now in progress)
- wlp9s0: Failed to initiate sched scan
- wlp9s0: Setting scan request: 5.000000 sec
- wlp9s0: Starting AP scan for wildcard SSID
- wlp9s0: Add radio work 'scan'@0x196b160
- wlp9s0: First radio work item in the queue - schedule start immediately
- wlp9s0: Starting radio work 'scan'@0x196b160 after 0.000008 second wait
- wlp9s0: nl80211: scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- Scan requested (ret=0) - scan timeout 30 seconds
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp9s0
- wlp9s0: nl80211: Scan trigger
- wlp9s0: Event SCAN_STARTED (47) received
- wlp9s0: Own scan request started a scan in 0.000023 seconds
- nl80211: Event message available
- nl80211: Drv Event 78 (NL80211_CMD_SCHED_SCAN_STOPPED) received for wlp9s0
- wlp9s0: nl80211: Sched scan stopped
- wlp9s0: Event SCHED_SCAN_STOPPED (36) received
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp9s0
- wlp9s0: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472
- wlp9s0: Event SCAN_RESULTS (3) received
- wlp9s0: Scan completed in 0.577823 seconds
- nl80211: Received scan results (8 BSSes)
- wlp9s0: BSS: Start scan result update 8
- wlp9s0: BSS: Add new id 7 BSSID 70:9f:2d:81:06:84 SSID 'Random SSID 5'
- wlp9s0: BSS: Add new id 8 BSSID d8:fe:e3:48:30:ed SSID 'Random SSID 1'
- wlp9s0: BSS: Add new id 9 BSSID e8:94:f6:44:3e:7a SSID ''
- wlp9s0: BSS: Add new id 10 BSSID 58:7f:66:39:aa:90 SSID 'Random SSID 2'
- wlp9s0: BSS: Add new id 11 BSSID d8:5d:4c:a4:3d:9d SSID 'Random SSID 3'
- wlp9s0: BSS: Add new id 12 BSSID f8:01:13:eb:fc:58 SSID 'Random SSID 6'
- wlp9s0: BSS: Add new id 13 BSSID 9c:c1:72:f8:35:50 SSID 'Random SSID 4'
- BSS: last_scan_res_used=8/32
- wlp9s0: New scan results available (own=1 ext=0)
- wlp9s0: Radio work 'scan'@0x196b160 done in 0.578534 seconds
- wlp9s0: Selecting BSS from priority group 0
- wlp9s0: 0: 90:f6:52:82:df:b7 ssid='DO NOT USE NUBZ' wpa_ie_len=0 rsn_ie_len=24 caps=0x411 level=-57 wps
- wlp9s0: skip - no WPA/RSN proto match
- wlp9s0: 1: 70:9f:2d:81:06:84 ssid='Random SSID 5' wpa_ie_len=26 rsn_ie_len=24 caps=0x411 level=-64 wps
- wlp9s0: skip - SSID mismatch
- wlp9s0: 2: d8:fe:e3:48:30:ed ssid='Random SSID 1' wpa_ie_len=28 rsn_ie_len=24 caps=0x411 level=-80
- wlp9s0: skip - SSID mismatch
- wlp9s0: 3: e8:94:f6:44:3e:7a ssid='' wpa_ie_len=0 rsn_ie_len=20 caps=0x31 level=-89
- wlp9s0: skip - SSID not known
- wlp9s0: 4: 58:7f:66:39:aa:90 ssid='Random SSID 2' wpa_ie_len=22 rsn_ie_len=0 caps=0x411 level=-90
- wlp9s0: skip - SSID mismatch
- wlp9s0: 5: d8:5d:4c:a4:3d:9d ssid='Random SSID 3' wpa_ie_len=22 rsn_ie_len=20 caps=0x431 level=-87
- wlp9s0: skip - SSID mismatch
- wlp9s0: 6: f8:01:13:eb:fc:58 ssid='Random SSID 6' wpa_ie_len=22 rsn_ie_len=0 caps=0x431 level=-91
- wlp9s0: skip - SSID mismatch
- wlp9s0: 7: 9c:c1:72:f8:35:50 ssid='Random SSID 4' wpa_ie_len=22 rsn_ie_len=20 caps=0x431 level=-91
- wlp9s0: skip - SSID mismatch
- wlp9s0: No suitable network found
- wlp9s0: Beginning of SSID list
- wlp9s0: Add wildcard SSID to sched_scan
- wlp9s0: add to filter ssid: DO NOT USE NUBZ
- wlp9s0: Starting sched scan: interval 10 (no timeout)
- wlp9s0: nl80211: sched_scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- nl80211: Sched scan filter SSID - hexdump_ascii(len=15):
- 44 4f 20 4e 4f 54 20 55 53 45 20 4e 55 42 5a DO NOT USE NUBZ
- nl80211: Sched scan requested (ret=0) - scan interval 10000 msec
- RTM_NEWLINK: ifi_index=4 ifname=wlp9s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Event message available
- nl80211: Drv Event 75 (NL80211_CMD_START_SCHED_SCAN) received for wlp9s0
- wlp9s0: nl80211: Sched scan started
- nl80211: Event message available
- nl80211: Drv Event 77 (NL80211_CMD_SCHED_SCAN_RESULTS) received for wlp9s0
- wlp9s0: nl80211: New sched scan results available
- wlp9s0: Event SCAN_RESULTS (3) received
- nl80211: Received scan results (1 BSSes)
- wlp9s0: BSS: Start scan result update 9
- BSS: last_scan_res_used=1/32
- wlp9s0: New scan results available (own=0 ext=0)
- wlp9s0: Selecting BSS from priority group 0
- wlp9s0: 0: 90:f6:52:82:df:b7 ssid='DO NOT USE NUBZ' wpa_ie_len=0 rsn_ie_len=24 caps=0x411 level=-43 wps
- wlp9s0: skip - no WPA/RSN proto match
- wlp9s0: No suitable network found
- wlp9s0: Already sched scanning
- nl80211: Event message available
- nl80211: Drv Event 77 (NL80211_CMD_SCHED_SCAN_RESULTS) received for wlp9s0
- wlp9s0: nl80211: New sched scan results available
- wlp9s0: Event SCAN_RESULTS (3) received
- nl80211: Received scan results (1 BSSes)
- wlp9s0: BSS: Start scan result update 10
- wlp9s0: BSS: Remove id 7 BSSID 70:9f:2d:81:06:84 SSID 'Random SSID 5' due to no match in scan
- wlp9s0: BSS: Remove id 8 BSSID d8:fe:e3:48:30:ed SSID 'Random SSID 1' due to no match in scan
- wlp9s0: BSS: Remove id 9 BSSID e8:94:f6:44:3e:7a SSID '' due to no match in scan
- wlp9s0: BSS: Remove id 10 BSSID 58:7f:66:39:aa:90 SSID 'Random SSID 2' due to no match in scan
- wlp9s0: BSS: Remove id 11 BSSID d8:5d:4c:a4:3d:9d SSID 'Random SSID 3' due to no match in scan
- wlp9s0: BSS: Remove id 12 BSSID f8:01:13:eb:fc:58 SSID 'Random SSID 6' due to no match in scan
- wlp9s0: BSS: Remove id 13 BSSID 9c:c1:72:f8:35:50 SSID 'Random SSID 4' due to no match in scan
- BSS: last_scan_res_used=1/32
- wlp9s0: New scan results available (own=0 ext=0)
- wlp9s0: Selecting BSS from priority group 0
- wlp9s0: 0: 90:f6:52:82:df:b7 ssid='DO NOT USE NUBZ' wpa_ie_len=0 rsn_ie_len=24 caps=0x411 level=-43 wps
- wlp9s0: skip - no WPA/RSN proto match
- wlp9s0: No suitable network found
- wlp9s0: Already sched scanning
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp9s0
- wlp9s0: nl80211: Scan trigger
- wlp9s0: Event SCAN_STARTED (47) received
- wlp9s0: External program started a scan
- nl80211: Event message available
- nl80211: Drv Event 78 (NL80211_CMD_SCHED_SCAN_STOPPED) received for wlp9s0
- wlp9s0: nl80211: Sched scan stopped
- wlp9s0: Event SCHED_SCAN_STOPPED (36) received
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp9s0
- wlp9s0: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472
- wlp9s0: Event SCAN_RESULTS (3) received
- wlp9s0: Scan completed in 0.577855 seconds
- nl80211: Received scan results (1 BSSes)
- wlp9s0: BSS: Start scan result update 11
- BSS: last_scan_res_used=1/32
- wlp9s0: New scan results available (own=0 ext=1)
- wlp9s0: Do not use results from externally requested scan operation for network selection
- RTM_NEWLINK: ifi_index=4 ifname=wlp9s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Event message available
- nl80211: Drv Event 75 (NL80211_CMD_START_SCHED_SCAN) received for wlp9s0
- wlp9s0: nl80211: Sched scan started
- nl80211: Event message available
- nl80211: Drv Event 77 (NL80211_CMD_SCHED_SCAN_RESULTS) received for wlp9s0
- wlp9s0: nl80211: New sched scan results available
- wlp9s0: Event SCAN_RESULTS (3) received
- nl80211: Received scan results (1 BSSes)
- wlp9s0: BSS: Start scan result update 12
- BSS: last_scan_res_used=1/32
- wlp9s0: New scan results available (own=0 ext=0)
- wlp9s0: Selecting BSS from priority group 0
- wlp9s0: 0: 90:f6:52:82:df:b7 ssid='DO NOT USE NUBZ' wpa_ie_len=0 rsn_ie_len=24 caps=0x411 level=-50 wps
- wlp9s0: skip - no WPA/RSN proto match
- wlp9s0: No suitable network found
- wlp9s0: Beginning of SSID list
- wlp9s0: Add wildcard SSID to sched_scan
- wlp9s0: add to filter ssid: DO NOT USE NUBZ
- wlp9s0: Starting sched scan: interval 10 (no timeout)
- wlp9s0: nl80211: sched_scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- nl80211: Sched scan filter SSID - hexdump_ascii(len=15):
- 44 4f 20 4e 4f 54 20 55 53 45 20 4e 55 42 5a DO NOT USE NUBZ
- nl80211: Sched scan start failed: ret=-115 (Operation now in progress)
- wlp9s0: Failed to initiate sched scan
- wlp9s0: Setting scan request: 5.000000 sec
- wlp9s0: Starting AP scan for wildcard SSID
- wlp9s0: Add radio work 'scan'@0x196b160
- wlp9s0: First radio work item in the queue - schedule start immediately
- wlp9s0: Starting radio work 'scan'@0x196b160 after 0.000008 second wait
- wlp9s0: nl80211: scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- Scan requested (ret=0) - scan timeout 30 seconds
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp9s0
- wlp9s0: nl80211: Scan trigger
- wlp9s0: Event SCAN_STARTED (47) received
- wlp9s0: Own scan request started a scan in 0.000021 seconds
- nl80211: Event message available
- nl80211: Drv Event 78 (NL80211_CMD_SCHED_SCAN_STOPPED) received for wlp9s0
- wlp9s0: nl80211: Sched scan stopped
- wlp9s0: Event SCHED_SCAN_STOPPED (36) received
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp9s0
- wlp9s0: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472
- wlp9s0: Event SCAN_RESULTS (3) received
- wlp9s0: Scan completed in 0.577952 seconds
- nl80211: Received scan results (8 BSSes)
- wlp9s0: BSS: Start scan result update 13
- wlp9s0: BSS: Add new id 14 BSSID 70:9f:2d:81:06:84 SSID 'Random SSID 5'
- wlp9s0: BSS: Add new id 15 BSSID d8:fe:e3:48:30:ed SSID 'Random SSID 1'
- wlp9s0: BSS: Add new id 16 BSSID e8:94:f6:44:3e:7a SSID ''
- wlp9s0: BSS: Add new id 17 BSSID 58:7f:66:39:aa:90 SSID 'Random SSID 2'
- wlp9s0: BSS: Add new id 18 BSSID d8:5d:4c:a4:3d:9d SSID 'Random SSID 3'
- wlp9s0: BSS: Add new id 19 BSSID f8:01:13:eb:fc:58 SSID 'Random SSID 6'
- wlp9s0: BSS: Add new id 20 BSSID 9c:c1:72:f8:35:50 SSID 'Random SSID 4'
- BSS: last_scan_res_used=8/32
- wlp9s0: New scan results available (own=1 ext=0)
- wlp9s0: Radio work 'scan'@0x196b160 done in 0.578455 seconds
- wlp9s0: Selecting BSS from priority group 0
- wlp9s0: 0: 90:f6:52:82:df:b7 ssid='DO NOT USE NUBZ' wpa_ie_len=0 rsn_ie_len=24 caps=0x411 level=-49 wps
- wlp9s0: skip - no WPA/RSN proto match
- wlp9s0: 1: 70:9f:2d:81:06:84 ssid='Random SSID 5' wpa_ie_len=26 rsn_ie_len=24 caps=0x411 level=-65 wps
- wlp9s0: skip - SSID mismatch
- wlp9s0: 2: d8:fe:e3:48:30:ed ssid='Random SSID 1' wpa_ie_len=28 rsn_ie_len=24 caps=0x411 level=-79
- wlp9s0: skip - SSID mismatch
- wlp9s0: 3: e8:94:f6:44:3e:7a ssid='' wpa_ie_len=0 rsn_ie_len=20 caps=0x31 level=-94
- wlp9s0: skip - SSID not known
- wlp9s0: 4: 58:7f:66:39:aa:90 ssid='Random SSID 2' wpa_ie_len=22 rsn_ie_len=0 caps=0x411 level=-86
- wlp9s0: skip - SSID mismatch
- wlp9s0: 5: d8:5d:4c:a4:3d:9d ssid='Random SSID 3' wpa_ie_len=22 rsn_ie_len=20 caps=0x431 level=-87
- wlp9s0: skip - SSID mismatch
- wlp9s0: 6: f8:01:13:eb:fc:58 ssid='Random SSID 6' wpa_ie_len=22 rsn_ie_len=0 caps=0x431 level=-90
- wlp9s0: skip - SSID mismatch
- wlp9s0: 7: 9c:c1:72:f8:35:50 ssid='Random SSID 4' wpa_ie_len=22 rsn_ie_len=20 caps=0x431 level=-91
- wlp9s0: skip - SSID mismatch
- wlp9s0: No suitable network found
- wlp9s0: Beginning of SSID list
- wlp9s0: Add wildcard SSID to sched_scan
- wlp9s0: add to filter ssid: DO NOT USE NUBZ
- wlp9s0: Starting sched scan: interval 10 (no timeout)
- wlp9s0: nl80211: sched_scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- nl80211: Sched scan filter SSID - hexdump_ascii(len=15):
- 44 4f 20 4e 4f 54 20 55 53 45 20 4e 55 42 5a DO NOT USE NUBZ
- nl80211: Sched scan requested (ret=0) - scan interval 10000 msec
- RTM_NEWLINK: ifi_index=4 ifname=wlp9s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Event message available
- nl80211: Drv Event 75 (NL80211_CMD_START_SCHED_SCAN) received for wlp9s0
- wlp9s0: nl80211: Sched scan started
- nl80211: Event message available
- nl80211: Drv Event 77 (NL80211_CMD_SCHED_SCAN_RESULTS) received for wlp9s0
- wlp9s0: nl80211: New sched scan results available
- wlp9s0: Event SCAN_RESULTS (3) received
- nl80211: Received scan results (1 BSSes)
- wlp9s0: BSS: Start scan result update 14
- BSS: last_scan_res_used=1/32
- wlp9s0: New scan results available (own=0 ext=0)
- wlp9s0: Selecting BSS from priority group 0
- wlp9s0: 0: 90:f6:52:82:df:b7 ssid='DO NOT USE NUBZ' wpa_ie_len=0 rsn_ie_len=24 caps=0x411 level=-49 wps
- wlp9s0: skip - no WPA/RSN proto match
- wlp9s0: No suitable network found
- wlp9s0: Already sched scanning
- nl80211: Event message available
- nl80211: Drv Event 77 (NL80211_CMD_SCHED_SCAN_RESULTS) received for wlp9s0
- wlp9s0: nl80211: New sched scan results available
- wlp9s0: Event SCAN_RESULTS (3) received
- nl80211: Received scan results (1 BSSes)
- wlp9s0: BSS: Start scan result update 15
- wlp9s0: BSS: Remove id 14 BSSID 70:9f:2d:81:06:84 SSID 'Random SSID 5' due to no match in scan
- wlp9s0: BSS: Remove id 15 BSSID d8:fe:e3:48:30:ed SSID 'Random SSID 1' due to no match in scan
- wlp9s0: BSS: Remove id 16 BSSID e8:94:f6:44:3e:7a SSID '' due to no match in scan
- wlp9s0: BSS: Remove id 17 BSSID 58:7f:66:39:aa:90 SSID 'Random SSID 2' due to no match in scan
- wlp9s0: BSS: Remove id 18 BSSID d8:5d:4c:a4:3d:9d SSID 'Random SSID 3' due to no match in scan
- wlp9s0: BSS: Remove id 19 BSSID f8:01:13:eb:fc:58 SSID 'Random SSID 6' due to no match in scan
- wlp9s0: BSS: Remove id 20 BSSID 9c:c1:72:f8:35:50 SSID 'Random SSID 4' due to no match in scan
- BSS: last_scan_res_used=1/32
- wlp9s0: New scan results available (own=0 ext=0)
- wlp9s0: Selecting BSS from priority group 0
- wlp9s0: 0: 90:f6:52:82:df:b7 ssid='DO NOT USE NUBZ' wpa_ie_len=0 rsn_ie_len=24 caps=0x411 level=-49 wps
- wlp9s0: skip - no WPA/RSN proto match
- wlp9s0: No suitable network found
- wlp9s0: Already sched scanning
- nl80211: Event message available
- nl80211: Drv Event 77 (NL80211_CMD_SCHED_SCAN_RESULTS) received for wlp9s0
- wlp9s0: nl80211: New sched scan results available
- wlp9s0: Event SCAN_RESULTS (3) received
- nl80211: Received scan results (1 BSSes)
- wlp9s0: BSS: Start scan result update 16
- BSS: last_scan_res_used=1/32
- wlp9s0: New scan results available (own=0 ext=0)
- wlp9s0: Selecting BSS from priority group 0
- wlp9s0: 0: 90:f6:52:82:df:b7 ssid='DO NOT USE NUBZ' wpa_ie_len=0 rsn_ie_len=24 caps=0x411 level=-39 wps
- wlp9s0: skip - no WPA/RSN proto match
- wlp9s0: No suitable network found
- wlp9s0: Already sched scanning
- nl80211: Event message available
- nl80211: Drv Event 77 (NL80211_CMD_SCHED_SCAN_RESULTS) received for wlp9s0
- wlp9s0: nl80211: New sched scan results available
- wlp9s0: Event SCAN_RESULTS (3) received
- nl80211: Received scan results (1 BSSes)
- wlp9s0: BSS: Start scan result update 17
- BSS: last_scan_res_used=1/32
- wlp9s0: New scan results available (own=0 ext=0)
- wlp9s0: Selecting BSS from priority group 0
- wlp9s0: 0: 90:f6:52:82:df:b7 ssid='DO NOT USE NUBZ' wpa_ie_len=0 rsn_ie_len=24 caps=0x411 level=-42 wps
- wlp9s0: skip - no WPA/RSN proto match
- wlp9s0: No suitable network found
- wlp9s0: Already sched scanning
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp9s0
- wlp9s0: nl80211: Scan trigger
- wlp9s0: Event SCAN_STARTED (47) received
- wlp9s0: External program started a scan
- nl80211: Event message available
- nl80211: Drv Event 78 (NL80211_CMD_SCHED_SCAN_STOPPED) received for wlp9s0
- wlp9s0: nl80211: Sched scan stopped
- wlp9s0: Event SCHED_SCAN_STOPPED (36) received
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp9s0
- wlp9s0: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472
- wlp9s0: Event SCAN_RESULTS (3) received
- wlp9s0: Scan completed in 0.577858 seconds
- nl80211: Received scan results (1 BSSes)
- wlp9s0: BSS: Start scan result update 18
- BSS: last_scan_res_used=1/32
- wlp9s0: New scan results available (own=0 ext=1)
- wlp9s0: Do not use results from externally requested scan operation for network selection
- RTM_NEWLINK: ifi_index=4 ifname=wlp9s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Event message available
- nl80211: Drv Event 75 (NL80211_CMD_START_SCHED_SCAN) received for wlp9s0
- wlp9s0: nl80211: Sched scan started
- nl80211: Event message available
- nl80211: Drv Event 77 (NL80211_CMD_SCHED_SCAN_RESULTS) received for wlp9s0
- wlp9s0: nl80211: New sched scan results available
- wlp9s0: Event SCAN_RESULTS (3) received
- nl80211: Received scan results (1 BSSes)
- wlp9s0: BSS: Start scan result update 19
- BSS: last_scan_res_used=1/32
- wlp9s0: New scan results available (own=0 ext=0)
- wlp9s0: Selecting BSS from priority group 0
- wlp9s0: 0: 90:f6:52:82:df:b7 ssid='DO NOT USE NUBZ' wpa_ie_len=0 rsn_ie_len=24 caps=0x411 level=-49 wps
- wlp9s0: skip - no WPA/RSN proto match
- wlp9s0: No suitable network found
- wlp9s0: Beginning of SSID list
- wlp9s0: Add wildcard SSID to sched_scan
- wlp9s0: add to filter ssid: DO NOT USE NUBZ
- wlp9s0: Starting sched scan: interval 10 (no timeout)
- wlp9s0: nl80211: sched_scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- nl80211: Sched scan filter SSID - hexdump_ascii(len=15):
- 44 4f 20 4e 4f 54 20 55 53 45 20 4e 55 42 5a DO NOT USE NUBZ
- nl80211: Sched scan start failed: ret=-115 (Operation now in progress)
- wlp9s0: Failed to initiate sched scan
- wlp9s0: Setting scan request: 5.000000 sec
- wlp9s0: Starting AP scan for wildcard SSID
- wlp9s0: Add radio work 'scan'@0x196afb0
- wlp9s0: First radio work item in the queue - schedule start immediately
- wlp9s0: Starting radio work 'scan'@0x196afb0 after 0.000007 second wait
- wlp9s0: nl80211: scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- Scan requested (ret=0) - scan timeout 30 seconds
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp9s0
- wlp9s0: nl80211: Scan trigger
- wlp9s0: Event SCAN_STARTED (47) received
- wlp9s0: Own scan request started a scan in 0.000022 seconds
- nl80211: Event message available
- nl80211: Drv Event 78 (NL80211_CMD_SCHED_SCAN_STOPPED) received for wlp9s0
- wlp9s0: nl80211: Sched scan stopped
- wlp9s0: Event SCHED_SCAN_STOPPED (36) received
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp9s0
- wlp9s0: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472
- wlp9s0: Event SCAN_RESULTS (3) received
- wlp9s0: Scan completed in 0.577857 seconds
- nl80211: Received scan results (7 BSSes)
- wlp9s0: BSS: Start scan result update 20
- wlp9s0: BSS: Add new id 21 BSSID 70:9f:2d:81:06:84 SSID 'Random SSID 5'
- wlp9s0: BSS: Add new id 22 BSSID d8:fe:e3:48:30:ed SSID 'Random SSID 1'
- wlp9s0: BSS: Add new id 23 BSSID f8:01:13:eb:fc:58 SSID 'Random SSID 6'
- wlp9s0: BSS: Add new id 24 BSSID 58:7f:66:39:aa:90 SSID 'Random SSID 2'
- wlp9s0: BSS: Add new id 25 BSSID d8:5d:4c:a4:3d:9d SSID 'Random SSID 3'
- wlp9s0: BSS: Add new id 26 BSSID 9c:c1:72:f8:35:50 SSID 'Random SSID 4'
- BSS: last_scan_res_used=7/32
- wlp9s0: New scan results available (own=1 ext=0)
- wlp9s0: Radio work 'scan'@0x196afb0 done in 0.578470 seconds
- wlp9s0: Selecting BSS from priority group 0
- wlp9s0: 0: 90:f6:52:82:df:b7 ssid='DO NOT USE NUBZ' wpa_ie_len=0 rsn_ie_len=24 caps=0x411 level=-49 wps
- wlp9s0: skip - no WPA/RSN proto match
- wlp9s0: 1: 70:9f:2d:81:06:84 ssid='Random SSID 5' wpa_ie_len=26 rsn_ie_len=24 caps=0x411 level=-64 wps
- wlp9s0: skip - SSID mismatch
- wlp9s0: 2: d8:fe:e3:48:30:ed ssid='Random SSID 1' wpa_ie_len=28 rsn_ie_len=24 caps=0x411 level=-78
- wlp9s0: skip - SSID mismatch
- wlp9s0: 3: f8:01:13:eb:fc:58 ssid='Random SSID 6' wpa_ie_len=22 rsn_ie_len=0 caps=0x431 level=-83
- wlp9s0: skip - SSID mismatch
- wlp9s0: 4: 58:7f:66:39:aa:90 ssid='Random SSID 2' wpa_ie_len=22 rsn_ie_len=0 caps=0x411 level=-89
- wlp9s0: skip - SSID mismatch
- wlp9s0: 5: d8:5d:4c:a4:3d:9d ssid='Random SSID 3' wpa_ie_len=22 rsn_ie_len=20 caps=0x431 level=-86
- wlp9s0: skip - SSID mismatch
- wlp9s0: 6: 9c:c1:72:f8:35:50 ssid='Random SSID 4' wpa_ie_len=22 rsn_ie_len=20 caps=0x431 level=-91
- wlp9s0: skip - SSID mismatch
- wlp9s0: No suitable network found
- wlp9s0: Beginning of SSID list
- wlp9s0: Add wildcard SSID to sched_scan
- wlp9s0: add to filter ssid: DO NOT USE NUBZ
- wlp9s0: Starting sched scan: interval 10 (no timeout)
- wlp9s0: nl80211: sched_scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- nl80211: Sched scan filter SSID - hexdump_ascii(len=15):
- 44 4f 20 4e 4f 54 20 55 53 45 20 4e 55 42 5a DO NOT USE NUBZ
- nl80211: Sched scan requested (ret=0) - scan interval 10000 msec
- RTM_NEWLINK: ifi_index=4 ifname=wlp9s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Event message available
- nl80211: Drv Event 75 (NL80211_CMD_START_SCHED_SCAN) received for wlp9s0
- wlp9s0: nl80211: Sched scan started
- nl80211: Event message available
- nl80211: Drv Event 77 (NL80211_CMD_SCHED_SCAN_RESULTS) received for wlp9s0
- wlp9s0: nl80211: New sched scan results available
- wlp9s0: Event SCAN_RESULTS (3) received
- nl80211: Received scan results (1 BSSes)
- wlp9s0: BSS: Start scan result update 21
- BSS: last_scan_res_used=1/32
- wlp9s0: New scan results available (own=0 ext=0)
- wlp9s0: Selecting BSS from priority group 0
- wlp9s0: 0: 90:f6:52:82:df:b7 ssid='DO NOT USE NUBZ' wpa_ie_len=0 rsn_ie_len=24 caps=0x411 level=-42 wps
- wlp9s0: skip - no WPA/RSN proto match
- wlp9s0: No suitable network found
- wlp9s0: Already sched scanning
- nl80211: Event message available
- nl80211: Drv Event 77 (NL80211_CMD_SCHED_SCAN_RESULTS) received for wlp9s0
- wlp9s0: nl80211: New sched scan results available
- wlp9s0: Event SCAN_RESULTS (3) received
- nl80211: Received scan results (1 BSSes)
- wlp9s0: BSS: Start scan result update 22
- wlp9s0: BSS: Remove id 21 BSSID 70:9f:2d:81:06:84 SSID 'Random SSID 5' due to no match in scan
- wlp9s0: BSS: Remove id 22 BSSID d8:fe:e3:48:30:ed SSID 'Random SSID 1' due to no match in scan
- wlp9s0: BSS: Remove id 23 BSSID f8:01:13:eb:fc:58 SSID 'Random SSID 6' due to no match in scan
- wlp9s0: BSS: Remove id 24 BSSID 58:7f:66:39:aa:90 SSID 'Random SSID 2' due to no match in scan
- wlp9s0: BSS: Remove id 25 BSSID d8:5d:4c:a4:3d:9d SSID 'Random SSID 3' due to no match in scan
- wlp9s0: BSS: Remove id 26 BSSID 9c:c1:72:f8:35:50 SSID 'Random SSID 4' due to no match in scan
- BSS: last_scan_res_used=1/32
- wlp9s0: New scan results available (own=0 ext=0)
- wlp9s0: Selecting BSS from priority group 0
- wlp9s0: 0: 90:f6:52:82:df:b7 ssid='DO NOT USE NUBZ' wpa_ie_len=0 rsn_ie_len=24 caps=0x411 level=-59 wps
- wlp9s0: skip - no WPA/RSN proto match
- wlp9s0: No suitable network found
- wlp9s0: Already sched scanning
- nl80211: Event message available
- nl80211: Drv Event 77 (NL80211_CMD_SCHED_SCAN_RESULTS) received for wlp9s0
- wlp9s0: nl80211: New sched scan results available
- wlp9s0: Event SCAN_RESULTS (3) received
- nl80211: Received scan results (1 BSSes)
- wlp9s0: BSS: Start scan result update 23
- BSS: last_scan_res_used=1/32
- wlp9s0: New scan results available (own=0 ext=0)
- wlp9s0: Selecting BSS from priority group 0
- wlp9s0: 0: 90:f6:52:82:df:b7 ssid='DO NOT USE NUBZ' wpa_ie_len=0 rsn_ie_len=24 caps=0x411 level=-41 wps
- wlp9s0: skip - no WPA/RSN proto match
- wlp9s0: No suitable network found
- wlp9s0: Already sched scanning
- nl80211: Event message available
- nl80211: Drv Event 77 (NL80211_CMD_SCHED_SCAN_RESULTS) received for wlp9s0
- wlp9s0: nl80211: New sched scan results available
- wlp9s0: Event SCAN_RESULTS (3) received
- nl80211: Received scan results (1 BSSes)
- wlp9s0: BSS: Start scan result update 24
- BSS: last_scan_res_used=1/32
- wlp9s0: New scan results available (own=0 ext=0)
- wlp9s0: Selecting BSS from priority group 0
- wlp9s0: 0: 90:f6:52:82:df:b7 ssid='DO NOT USE NUBZ' wpa_ie_len=0 rsn_ie_len=24 caps=0x411 level=-40 wps
- wlp9s0: skip - no WPA/RSN proto match
- wlp9s0: No suitable network found
- wlp9s0: Already sched scanning
- nl80211: Event message available
- nl80211: Drv Event 77 (NL80211_CMD_SCHED_SCAN_RESULTS) received for wlp9s0
- wlp9s0: nl80211: New sched scan results available
- wlp9s0: Event SCAN_RESULTS (3) received
- nl80211: Received scan results (1 BSSes)
- wlp9s0: BSS: Start scan result update 25
- BSS: last_scan_res_used=1/32
- wlp9s0: New scan results available (own=0 ext=0)
- wlp9s0: Selecting BSS from priority group 0
- wlp9s0: 0: 90:f6:52:82:df:b7 ssid='DO NOT USE NUBZ' wpa_ie_len=0 rsn_ie_len=24 caps=0x411 level=-50 wps
- wlp9s0: skip - no WPA/RSN proto match
- wlp9s0: No suitable network found
- wlp9s0: Already sched scanning
- nl80211: Event message available
- nl80211: Drv Event 77 (NL80211_CMD_SCHED_SCAN_RESULTS) received for wlp9s0
- wlp9s0: nl80211: New sched scan results available
- wlp9s0: Event SCAN_RESULTS (3) received
- nl80211: Received scan results (1 BSSes)
- wlp9s0: BSS: Start scan result update 26
- BSS: last_scan_res_used=1/32
- wlp9s0: New scan results available (own=0 ext=0)
- wlp9s0: Selecting BSS from priority group 0
- wlp9s0: 0: 90:f6:52:82:df:b7 ssid='DO NOT USE NUBZ' wpa_ie_len=0 rsn_ie_len=24 caps=0x411 level=-50 wps
- wlp9s0: skip - no WPA/RSN proto match
- wlp9s0: No suitable network found
- wlp9s0: Already sched scanning
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp9s0
- wlp9s0: nl80211: Scan trigger
- wlp9s0: Event SCAN_STARTED (47) received
- wlp9s0: External program started a scan
- nl80211: Event message available
- nl80211: Drv Event 78 (NL80211_CMD_SCHED_SCAN_STOPPED) received for wlp9s0
- wlp9s0: nl80211: Sched scan stopped
- wlp9s0: Event SCHED_SCAN_STOPPED (36) received
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp9s0
- wlp9s0: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472
- wlp9s0: Event SCAN_RESULTS (3) received
- wlp9s0: Scan completed in 0.577850 seconds
- nl80211: Received scan results (1 BSSes)
- wlp9s0: BSS: Start scan result update 27
- BSS: last_scan_res_used=1/32
- wlp9s0: New scan results available (own=0 ext=1)
- wlp9s0: Do not use results from externally requested scan operation for network selection
- RTM_NEWLINK: ifi_index=4 ifname=wlp9s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Event message available
- nl80211: Drv Event 75 (NL80211_CMD_START_SCHED_SCAN) received for wlp9s0
- wlp9s0: nl80211: Sched scan started
- nl80211: Event message available
- nl80211: Drv Event 77 (NL80211_CMD_SCHED_SCAN_RESULTS) received for wlp9s0
- wlp9s0: nl80211: New sched scan results available
- wlp9s0: Event SCAN_RESULTS (3) received
- nl80211: Received scan results (1 BSSes)
- wlp9s0: BSS: Start scan result update 28
- BSS: last_scan_res_used=1/32
- wlp9s0: New scan results available (own=0 ext=0)
- wlp9s0: Selecting BSS from priority group 0
- wlp9s0: 0: 90:f6:52:82:df:b7 ssid='DO NOT USE NUBZ' wpa_ie_len=0 rsn_ie_len=24 caps=0x411 level=-53 wps
- wlp9s0: skip - no WPA/RSN proto match
- wlp9s0: No suitable network found
- wlp9s0: Beginning of SSID list
- wlp9s0: Add wildcard SSID to sched_scan
- wlp9s0: add to filter ssid: DO NOT USE NUBZ
- wlp9s0: Starting sched scan: interval 10 (no timeout)
- wlp9s0: nl80211: sched_scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- nl80211: Sched scan filter SSID - hexdump_ascii(len=15):
- 44 4f 20 4e 4f 54 20 55 53 45 20 4e 55 42 5a DO NOT USE NUBZ
- nl80211: Sched scan start failed: ret=-115 (Operation now in progress)
- wlp9s0: Failed to initiate sched scan
- wlp9s0: Setting scan request: 5.000000 sec
- wlp9s0: Starting AP scan for wildcard SSID
- wlp9s0: Add radio work 'scan'@0x196afb0
- wlp9s0: First radio work item in the queue - schedule start immediately
- wlp9s0: Starting radio work 'scan'@0x196afb0 after 0.000008 second wait
- wlp9s0: nl80211: scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- Scan requested (ret=0) - scan timeout 30 seconds
- nl80211: Event message available
- nl80211: Drv Event 33 (NL80211_CMD_TRIGGER_SCAN) received for wlp9s0
- wlp9s0: nl80211: Scan trigger
- wlp9s0: Event SCAN_STARTED (47) received
- wlp9s0: Own scan request started a scan in 0.000022 seconds
- nl80211: Event message available
- nl80211: Drv Event 78 (NL80211_CMD_SCHED_SCAN_STOPPED) received for wlp9s0
- wlp9s0: nl80211: Sched scan stopped
- wlp9s0: Event SCHED_SCAN_STOPPED (36) received
- nl80211: Event message available
- nl80211: Drv Event 34 (NL80211_CMD_NEW_SCAN_RESULTS) received for wlp9s0
- wlp9s0: nl80211: New scan results available
- nl80211: Scan probed for SSID ''
- nl80211: Scan included frequencies: 2412 2417 2422 2427 2432 2437 2442 2447 2452 2457 2462 2467 2472
- wlp9s0: Event SCAN_RESULTS (3) received
- wlp9s0: Scan completed in 0.577899 seconds
- nl80211: Received scan results (7 BSSes)
- wlp9s0: BSS: Start scan result update 29
- wlp9s0: BSS: Add new id 27 BSSID 70:9f:2d:81:06:84 SSID 'Random SSID 5'
- wlp9s0: BSS: Add new id 28 BSSID d8:fe:e3:48:30:ed SSID 'Random SSID 1'
- wlp9s0: BSS: Add new id 29 BSSID 58:7f:66:39:aa:90 SSID 'Random SSID 2'
- wlp9s0: BSS: Add new id 30 BSSID d8:5d:4c:a4:3d:9d SSID 'Random SSID 3'
- wlp9s0: BSS: Add new id 31 BSSID f8:01:13:eb:fc:58 SSID 'Random SSID 6'
- wlp9s0: BSS: Add new id 32 BSSID 9c:c1:72:f8:35:50 SSID 'Random SSID 4'
- BSS: last_scan_res_used=7/32
- wlp9s0: New scan results available (own=1 ext=0)
- wlp9s0: Radio work 'scan'@0x196afb0 done in 0.578498 seconds
- wlp9s0: Selecting BSS from priority group 0
- wlp9s0: 0: 90:f6:52:82:df:b7 ssid='DO NOT USE NUBZ' wpa_ie_len=0 rsn_ie_len=24 caps=0x411 level=-41 wps
- wlp9s0: skip - no WPA/RSN proto match
- wlp9s0: 1: 70:9f:2d:81:06:84 ssid='Random SSID 5' wpa_ie_len=26 rsn_ie_len=24 caps=0x411 level=-64 wps
- wlp9s0: skip - SSID mismatch
- wlp9s0: 2: d8:fe:e3:48:30:ed ssid='Random SSID 1' wpa_ie_len=28 rsn_ie_len=24 caps=0x411 level=-84
- wlp9s0: skip - SSID mismatch
- wlp9s0: 3: 58:7f:66:39:aa:90 ssid='Random SSID 2' wpa_ie_len=22 rsn_ie_len=0 caps=0x411 level=-83
- wlp9s0: skip - SSID mismatch
- wlp9s0: 4: d8:5d:4c:a4:3d:9d ssid='Random SSID 3' wpa_ie_len=22 rsn_ie_len=20 caps=0x431 level=-88
- wlp9s0: skip - SSID mismatch
- wlp9s0: 5: f8:01:13:eb:fc:58 ssid='Random SSID 6' wpa_ie_len=22 rsn_ie_len=0 caps=0x431 level=-89
- wlp9s0: skip - SSID mismatch
- wlp9s0: 6: 9c:c1:72:f8:35:50 ssid='Random SSID 4' wpa_ie_len=22 rsn_ie_len=20 caps=0x431 level=-90
- wlp9s0: skip - SSID mismatch
- wlp9s0: No suitable network found
- wlp9s0: Beginning of SSID list
- wlp9s0: Add wildcard SSID to sched_scan
- wlp9s0: add to filter ssid: DO NOT USE NUBZ
- wlp9s0: Starting sched scan: interval 10 (no timeout)
- wlp9s0: nl80211: sched_scan request
- nl80211: Scan SSID - hexdump_ascii(len=0): [NULL]
- nl80211: Sched scan filter SSID - hexdump_ascii(len=15):
- 44 4f 20 4e 4f 54 20 55 53 45 20 4e 55 42 5a DO NOT USE NUBZ
- nl80211: Sched scan requested (ret=0) - scan interval 10000 msec
- RTM_NEWLINK: ifi_index=4 ifname=wlp9s0 wext ifi_family=0 ifi_flags=0x1003 ([UP])
- nl80211: Event message available
- nl80211: Drv Event 75 (NL80211_CMD_START_SCHED_SCAN) received for wlp9s0
- wlp9s0: nl80211: Sched scan started
- nl80211: Event message available
- nl80211: Drv Event 77 (NL80211_CMD_SCHED_SCAN_RESULTS) received for wlp9s0
- wlp9s0: nl80211: New sched scan results available
- wlp9s0: Event SCAN_RESULTS (3) received
- nl80211: Received scan results (1 BSSes)
- wlp9s0: BSS: Start scan result update 30
- BSS: last_scan_res_used=1/32
- wlp9s0: New scan results available (own=0 ext=0)
- wlp9s0: Selecting BSS from priority group 0
- wlp9s0: 0: 90:f6:52:82:df:b7 ssid='DO NOT USE NUBZ' wpa_ie_len=0 rsn_ie_len=24 caps=0x411 level=-43 wps
- wlp9s0: skip - no WPA/RSN proto match
- wlp9s0: No suitable network found
- wlp9s0: Already sched scanning
- ^Cwlp9s0: Removing interface wlp9s0
- wlp9s0: Request to deauthenticate - bssid=00:00:00:00:00:00 pending_bssid=00:00:00:00:00:00 reason=3 state=SCANNING
- wlp9s0: State: SCANNING -> DISCONNECTED
- nl80211: Set wlp9s0 operstate 0->0 (DORMANT)
- netlink: Operstate: ifindex=4 linkmode=-1 (no change), operstate=5 (IF_OPER_DORMANT)
- EAPOL: External notification - portEnabled=0
- EAPOL: External notification - portValid=0
- wlp9s0: WPA: Clear old PMK and PTK
- wlp9s0: BSS: Remove id 27 BSSID 70:9f:2d:81:06:84 SSID 'Random SSID 5' due to wpa_bss_flush
- wlp9s0: BSS: Remove id 28 BSSID d8:fe:e3:48:30:ed SSID 'Random SSID 1' due to wpa_bss_flush
- wlp9s0: BSS: Remove id 29 BSSID 58:7f:66:39:aa:90 SSID 'Random SSID 2' due to wpa_bss_flush
- wlp9s0: BSS: Remove id 30 BSSID d8:5d:4c:a4:3d:9d SSID 'Random SSID 3' due to wpa_bss_flush
- wlp9s0: BSS: Remove id 31 BSSID f8:01:13:eb:fc:58 SSID 'Random SSID 6' due to wpa_bss_flush
- wlp9s0: BSS: Remove id 32 BSSID 9c:c1:72:f8:35:50 SSID 'Random SSID 4' due to wpa_bss_flush
- wlp9s0: BSS: Remove id 0 BSSID 90:f6:52:82:df:b7 SSID 'DO NOT USE NUBZ' due to wpa_bss_flush
- wlp9s0: Cancelling delayed sched scan
- wlp9s0: Cancelling scan request
- wlp9s0: Cancelling authentication timeout
- wlp9s0: Cancelling sched scan
- nl80211: Sched scan stop sent
- Remove interface wlp9s0 from radio phy0
- Remove radio phy0
- nl80211: deinit ifname=wlp9s0 disabled_11b_rates=0
- nl80211: Remove monitor interface: refcount=0
- netlink: Operstate: ifindex=4 linkmode=0 (kernel-control), operstate=6 (IF_OPER_UP)
- nl80211: Set mode ifindex 4 iftype 2 (STATION)
- nl80211: Unsubscribe mgmt frames handle 0x88888888891c7c29 (mode change)
- wlp9s0: CTRL-EVENT-TERMINATING
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement