Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- root@FlashForge:/proc# dmesg
- [ 0.000000] Linux version 3.18.23 (heyanbo@ubuntu ) (gcc version 4.8.3 (OpenWrt/Linaro GCC 4.8-2014.04 r49389) ) #54 20180831
- [ 0.000000] Board has DDR2
- [ 0.000000] Analog PMU set to hw control
- [ 0.000000] Digital PMU set to hw control
- [ 0.000000] SoC Type: MediaTek MT7688 ver:1 eco:2
- [ 0.000000] bootconsole [early0] enabled
- [ 0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
- [ 0.000000] MIPS: machine is MediaTek LinkIt Smart 7688
- [ 0.000000] Determined physical RAM map:
- [ 0.000000] memory: 04000000 @ 00000000 (usable)
- [ 0.000000] Initrd not found or empty - disabling initrd
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x00000000-0x03ffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x00000000-0x03ffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x03ffffff]
- [ 0.000000] On node 0 totalpages: 16384
- [ 0.000000] free_area_init_node: node 0, pgdat 805c22a0, node_mem_map 81000000
- [ 0.000000] Normal zone: 128 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 16384 pages, LIFO batch:3
- [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
- [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
- [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
- [ 0.000000] Kernel command line: console=ttyS0,115200 noinitrd root=/dev/mmcblk0p1 rootfstype=ext4 init=/init rw rootwait console=ttyS0,115200n8
- [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
- [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
- [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Writing ErrCtl register=00005d8d
- [ 0.000000] Readback ErrCtl register=00005d8d
- [ 0.000000] Memory: 58264K/65536K available (4426K kernel code, 335K rwdata, 1436K rodata, 192K init, 208K bss, 7272K reserved)
- [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] NR_IRQS:256
- [ 0.000000] intc: using register map from devicetree
- [ 0.000000] CPU Clock: 580MHz
- [ 0.000000] clocksource_of_init: no matching clocksources found
- [ 0.050000] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
- [ 0.060000] pid_max: default: 32768 minimum: 301
- [ 0.060000] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.070000] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.080000] pinctrl core: initialized pinctrl subsystem
- [ 0.080000] NET: Registered protocol family 16
- [ 0.090000] rt2880-pinmux pinctrl: gpio(14),gpio(0)
- [ 0.090000] rt2880-pinmux pinctrl: pwm1(0),gpio(0)
- [ 0.100000] rt2880-pinmux pinctrl: perst(6),gpio(0)
- [ 0.100000] rt2880-pinmux pinctrl: refclk(5),gpio(0)
- [ 0.100000] rt2880-pinmux pinctrl: i2s(11),gpio(0)
- [ 0.110000] rt2880-pinmux pinctrl: i2c(4),gpio(0)
- [ 0.110000] rt2880-pinmux pinctrl: uart1(3),gpio(0)
- [ 0.110000] rt2880-pinmux pinctrl: spis(13),gpio(0)
- [ 0.120000] rt2880-pinmux pinctrl: wled_an(15),wled_an(52)
- [ 0.120000] rt2880-pinmux pinctrl: wdt(7),gpio(0)
- [ 0.150000] mt7621_gpio 10000600.gpio: registering 32 gpios
- [ 0.160000] mt7621_gpio 10000600.gpio: registering 32 gpios
- [ 0.160000] mt7621_gpio 10000600.gpio: registering 32 gpios
- [ 0.170000] SCSI subsystem initialized
- [ 0.170000] usbcore: registered new interface driver usbfs
- [ 0.180000] usbcore: registered new interface driver hub
- [ 0.180000] usbcore: registered new device driver usb
- [ 0.190000] media: Linux media interface: v0.10
- [ 0.190000] Linux video capture interface: v2.00
- [ 0.200000] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.200000] Switched to clocksource MIPS
- [ 0.210000] NET: Registered protocol family 2
- [ 0.210000] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.210000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
- [ 0.220000] TCP: Hash tables configured (established 1024 bind 1024)
- [ 0.220000] TCP: reno registered
- [ 0.230000] UDP hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
- [ 0.240000] NET: Registered protocol family 1
- [ 0.240000] RPC: Registered named UNIX socket transport module.
- [ 0.250000] RPC: Registered udp transport module.
- [ 0.250000] RPC: Registered tcp transport module.
- [ 0.260000] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.270000] PCI: CLS 0 bytes, default 32
- [ 0.270000] futex hash table entries: 256 (order: -1, 3072 bytes)
- [ 0.280000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.290000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 0.300000] msgmni has been set to 113
- [ 0.310000] io scheduler noop registered
- [ 0.310000] io scheduler deadline registered (default)
- [ 0.320000] rt2880-pinmux pinctrl: pwm0(1),pwm0(8)
- [ 0.320000] rt2880-pinmux pinctrl: pin io19 already requested by pinctrl; cannot claim for 10005000.pwm
- [ 0.330000] rt2880-pinmux pinctrl: pin-19 (10005000.pwm) status -22
- [ 0.340000] rt2880-pinmux pinctrl: could not request pin 19 (io19) from group pwm1 on device rt2880-pinmux
- [ 0.340000] mtk-pwm 10005000.pwm: Error applying setting, reverse things back
- [ 0.350000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
- [ 0.360000] rt2880-pinmux pinctrl: uart0(10),uart0(32)
- [ 0.370000] console [ttyS0] disabled
- [ 0.370000] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
- [ 0.380000] console [ttyS0] enabled
- [ 0.380000] bootconsole [early0] disabled
- [ 0.390000] rt2880-pinmux pinctrl: uart2(2),uart2(12)
- [ 0.400000] 10000e00.uart2: ttyS1 at MMIO 0x10000e00 (irq = 30, base_baud = 2500000) is a 16550A
- [ 0.410000] rt2880-pinmux pinctrl: spi(8),spi(24)
- [ 0.410000] rt2880-pinmux pinctrl: spi cs1(12),spi cs1(40)
- [ 0.420000] rt2880-pinmux pinctrl: spi cs1(12),spi cs1(40)
- [ 0.420000] rt2880-pinmux pinctrl: spi cs1 is already enabled
- [ 0.430000] spi-mt7621 10000b00.spi: 10000b00.spi register start
- [ 0.440000] spi-mt7621 10000b00.spi: sys_freq: 193333333
- [ 0.440000] spi-mt7621 10000b00.spi: 10000b00.spi register success
- [ 0.460000] spi spi32766.1: cs:1 is gpio 5
- [ 0.460000] spi spi32766.1: spi cs gpio ctl is gpio 40
- [ 0.470000] drivers/video/fbtft/show_logo.c showFlashforgeLogo
- [ 0.830000] graphics fb0: fb_ili9341 frame buffer, 240x320, 150 KiB video memory, 0 KiB DMA buffer memory, fps=20, spi32766.1 at 24 MHz
- [ 0.860000] spi spi32766.0: spi cs gpio ctl is gpio 40
- [ 0.870000] m25p80 spi32766.0: found s25fl064k, expected mx25l6405d
- [ 0.870000] m25p80 spi32766.0: s25fl064k (8192 Kbytes)
- [ 0.880000] m25p80 spi32766.0: using chunked io
- [ 0.880000] 4 ofpart partitions found on MTD device spi32766.0
- [ 0.890000] Creating 4 MTD partitions on "spi32766.0":
- [ 0.890000] 0x000000000000-0x000000030000 : "u-boot"
- [ 0.900000] 0x000000030000-0x000000040000 : "u-boot-env"
- [ 0.910000] 0x000000040000-0x000000050000 : "factory"
- [ 0.910000] 0x000000050000-0x000000800000 : "firmware"
- [ 0.930000] 2 uimage-fw partitions found on MTD device firmware
- [ 0.940000] 0x000000050000-0x000000188809 : "kernel"
- [ 0.950000] 0x000000188809-0x000000800000 : "rootfs"
- [ 0.950000] mtd: device 5 (rootfs) set to be root filesystem
- [ 0.960000] 1 squashfs-split partitions found on MTD device rootfs
- [ 0.960000] 0x000000550000-0x000000800000 : "rootfs_data"
- [ 0.980000] spi spi32766.2: cs:2 is gpio 4
- [ 0.980000] spi spi32766.2: spi cs gpio ctl is gpio 40
- [ 1.000000] ralink_soc_eth 10100000.ethernet eth0: ralink at 0xb0100000, irq 5
- [ 1.000000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.010000] ehci-pci: EHCI PCI platform driver
- [ 1.010000] ehci-platform: EHCI generic platform driver
- [ 1.030000] phy phy-10120000.usbphy.0: remote usb device wakeup disabled
- [ 1.040000] phy phy-10120000.usbphy.0: UTMI 16bit 30MHz
- [ 1.040000] ehci-platform 101c0000.ehci: EHCI Host Controller
- [ 1.050000] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
- [ 1.060000] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
- [ 1.080000] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
- [ 1.080000] hub 1-0:1.0: USB hub found
- [ 1.090000] hub 1-0:1.0: 1 port detected
- [ 1.090000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.100000] ohci-platform: OHCI generic platform driver
- [ 1.100000] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
- [ 1.110000] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
- [ 1.120000] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
- [ 1.180000] hub 2-0:1.0: USB hub found
- [ 1.180000] hub 2-0:1.0: 1 port detected
- [ 1.190000] usbcore: registered new interface driver usb-storage
- [ 1.710000] i8042: i8042 controller selftest timeout
- [ 1.710000] mousedev: PS/2 mouse device common for all mice
- [ 1.720000] ads7846 spi32766.2: cs:2 is gpio 4
- [ 1.720000] ads7846 spi32766.2: spi cs gpio ctl is gpio 40
- [ 1.730000] gpio_pendown from dts is gpio11
- [ 1.730000] gpio_pendown is 11, spi->irq is 40
- [ 1.740000] ads7846 spi32766.2: touchscreen, irq 40
- [ 1.740000] input: ADS7843 Touchscreen as /devices/10000000.palmbus/10000b00.spi/spi_master/spi32766/spi32766.2/input/input0
- [ 1.760000] usbcore: registered new interface driver uvcvideo
- [ 1.760000] USB Video Class driver (1.1.1)
- [ 1.770000] mt7621_wdt 10000120.watchdog: Initialized
- [ 1.770000] MTK MSDC device init.
- [ 1.780000] rt2880-pinmux pinctrl: sdmode(9),sdxc(28)
- [ 1.820000] mtk-sd: MediaTek MT6575 MSDC Driver
- [ 1.820000] hidraw: raw HID events driver (C) Jiri Kosina
- [ 1.830000] usbcore: registered new interface driver usbhid
- [ 1.830000] usbhid: USB HID core driver
- [ 1.840000] TCP: cubic registered
- [ 1.840000] NET: Registered protocol family 17
- [ 1.840000] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
- [ 1.860000] 8021q: 802.1Q VLAN Support v1.8
- [ 1.860000] Key type dns_resolver registered
- [ 1.870000] Waiting for root device /dev/mmcblk0p1...
- [ 1.930000] mmc0: BKOPS_EN bit is not set
- [ 1.940000] mmc0: new high speed MMC card at address 0001
- [ 1.940000] mmcblk0: mmc0:0001 08A391 7.22 GiB
- [ 1.950000] mmcblk0boot0: mmc0:0001 08A391 partition 1 4.00 MiB
- [ 1.950000] mmcblk0boot1: mmc0:0001 08A391 partition 2 4.00 MiB
- [ 1.960000] mmcblk0: p1 p2
- [ 2.060000] EXT4-fs (mmcblk0p1): warning: mounting fs with errors, running e2fsck is recommended
- [ 2.070000] EXT4-fs (mmcblk0p1): recovery complete
- [ 2.080000] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
- [ 2.090000] VFS: Mounted root (ext4 filesystem) on device 179:1.
- [ 2.090000] Freeing unused kernel memory: 192K (80610000 - 80640000)
- [ 2.240000] init: Console is alive
- [ 2.240000] init: - watchdog -
- [ 3.250000] init: - preinit -
- [ 3.390000] rt305x-esw 10110000.esw: link changed 0x00
- [ 3.430000] random: procd urandom read with 11 bits of entropy available
- [ 3.510000] procd: - early -
- [ 3.510000] procd: - watchdog -
- [ 4.100000] procd: - ubus -
- [ 5.120000] procd: - init -
- [ 6.760000] <-- RTMPAllocTxRxRingMemory, Status=0, ErrorValue=0x
- [ 6.760000] <-- RTMPAllocAdapterBlock, Status=0
- [ 6.800000] nf_conntrack version 0.5.0 (913 buckets, 3652 max)
- [ 6.850000] xt_time: kernel timezone is -0000
- [ 6.850000] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 8.740000] EXT4-fs (mmcblk0p2): recovery complete
- [ 8.740000] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- [ 8.790000] device eth0 entered promiscuous mode
- [ 24.450000] device eth0 left promiscuous mode
- [ 24.450000] device eth0 entered promiscuous mode
- [ 24.470000] br-lan: port 1(eth0) entered forwarding state
- [ 24.470000] br-lan: port 1(eth0) entered forwarding state
- [ 25.030000] efuse_probe: efuse = 10000012
- [ 25.210000] tssi_0_target_pwr_g_band = 27
- [ 25.210000] tssi_1_target_pwr_g_band = 27
- [ 26.470000] br-lan: port 1(eth0) entered forwarding state
- [ 30.760000] <==== rt28xx_init, Status=0
- [ 32.560000] device ra0 entered promiscuous mode
- [ 32.570000] br-lan: port 2(ra0) entered forwarding state
- [ 32.570000] br-lan: port 2(ra0) entered forwarding state
- [ 34.570000] br-lan: port 2(ra0) entered forwarding state
- [ 38.490000] random: nonblocking pool is initialized
- [ 302.560000] EXT4-fs (mmcblk0p1): error count since last fsck: 10
- [ 302.560000] EXT4-fs (mmcblk0p1): initial error at time 1527494518: ext4_journal_check_start:56
- [ 302.570000] EXT4-fs (mmcblk0p1): last error at time 1552725711: ext4_journal_check_start:56
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement