Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- MT7629> bootm ${loadaddr}
- bootm flag=0, states=70f
- ## Loading kernel from FIT Image at 42007f1c ...
- Using 'config-1' configuration
- Trying 'kernel-1' kernel subimage
- Description: ARM OpenWrt Linux-5.4.124
- Type: Kernel Image
- Compression: lzma compressed
- Data Start: 0x42008000
- Data Size: 4509581 Bytes = 4.3 MiB
- Architecture: ARM
- OS: Linux
- Load Address: 0x40008000
- Entry Point: 0x40008000
- Hash algo: crc32
- Hash value: bfc9ae58
- Hash algo: sha1
- Hash value: c1085590021e6408b721e1f4ffe823e39c7de255
- Verifying Hash Integrity ... crc32+ sha1+ OK
- ## Loading fdt from FIT Image at 42007f1c ...
- Using 'config-1' configuration
- Trying 'fdt-1' fdt subimage
- Description: ARM OpenWrt mediatek_mt7629-rfb device tree blob
- Type: Flat Device Tree
- Compression: uncompressed
- Data Start: 0x424550d0
- Data Size: 13406 Bytes = 13.1 KiB
- Architecture: ARM
- Hash algo: crc32
- Hash value: 38e1006f
- Hash algo: sha1
- Hash value: 1761acf0472580167533b1c21ec6127cfe0225a8
- Verifying Hash Integrity ... crc32+ sha1+ OK
- Booting using the fdt blob at 0x424550d0
- Uncompressing Kernel Image ... OK
- Loading Device Tree to 4fb55000, end 4fb5b45d ... OK
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 5.4.124 (builder@buildhost) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r16957-3d026d2425)) #0 SMP Tue Jun 15 10:48:20 2021
- [ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: div instructions available: patching division code
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] OF: fdt: Machine model: MediaTek MT7629 reference board
- [ 0.000000] earlycon: uart8250 at MMIO32 0x11002000 (options '')
- [ 0.000000] printk: bootconsole [uart8250] enabled
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] percpu: Embedded 15 pages/cpu s29964 r8192 d23284 u61440
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64960
- [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0x11002000 console=ttyS0,115200n8
- [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 244664K/262144K available (5651K kernel code, 218K rwdata, 1448K rodata, 6144K init, 217K bss, 17480K reserved, 0K cma-reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] rcu: Hierarchical RCU implementation.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
- [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
- [ 0.000000] random: get_random_bytes called from start_kernel+0x2ec/0x49c with crng_init=0
- [ 0.000000] arch_timer: cp15 timer(s) running at 20.00MHz (virt).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x49cd42e20, max_idle_ns: 440795202120 ns
- [ 0.000005] sched_clock: 56 bits at 20MHz, resolution 50ns, wraps every 4398046511100ns
- [ 0.008131] Switching to timer-based delay loop, resolution 50ns
- [ 0.014485] Calibrating delay loop (skipped), value calculated using timer frequency.. 40.00 BogoMIPS (lpj=200000)
- [ 0.025008] pid_max: default: 32768 minimum: 301
- [ 0.029820] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.037261] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.045827] CPU: Testing write buffer coherency: ok
- [ 0.051129] CPU0: update cpu_capacity 1024
- [ 0.055285] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.061527] Setting up static identity map for 0x40100000 - 0x4010003c
- [ 0.068248] rcu: Hierarchical SRCU implementation.
- [ 0.073430] smp: Bringing up secondary CPUs ...
- [ 1.133609] CPU1: failed to come online
- [ 1.137564] smp: Brought up 1 node, 1 CPU
- [ 1.141631] SMP: Total of 1 processors activated (40.00 BogoMIPS).
- [ 1.147931] CPU: All CPU(s) started in SVC mode.
- [ 1.155358] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 1.165411] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
- [ 1.172423] pinctrl core: initialized pinctrl subsystem
- [ 1.178741] NET: Registered protocol family 16
- [ 1.183496] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 1.191139] cpuidle: using governor menu
- [ 1.226215] SCSI subsystem initialized
- [ 1.230216] usbcore: registered new interface driver usbfs
- [ 1.235948] usbcore: registered new interface driver hub
- [ 1.241375] usbcore: registered new device driver usb
- [ 1.246661] workqueue: max_active 576 requested for napi_workq is out of range, clamping between 1 and 512
- [ 1.259852] clocksource: Switched to clocksource arch_sys_counter
- [ 1.266894] thermal_sys: Registered thermal governor 'step_wise'
- [ 1.267105] NET: Registered protocol family 2
- [ 1.277771] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
- [ 1.285592] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
- [ 1.294131] TCP established hash table entries: 2048 (order: 1, 8192 bytes, linear)
- [ 1.301934] TCP bind hash table entries: 2048 (order: 2, 16384 bytes, linear)
- [ 1.309198] TCP: Hash tables configured (established 2048 bind 2048)
- [ 1.315738] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
- [ 1.322406] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
- [ 1.329634] NET: Registered protocol family 1
- [ 1.334104] PCI: CLS 0 bytes, default 64
- [ 1.392252] workingset: timestamp_bits=14 max_order=16 bucket_order=2
- [ 1.402782] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 1.408708] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 1.425258] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- [ 1.434248] mtk-tphy soc:usb-phy@1a0c4000: failed to get ref_clk(id-1)
- [ 2.445046] mtk-scpsys 10006000.scpsys: Failed to power on domain wb
- [ 2.451518] ------------[ cut here ]------------
- [ 2.456215] WARNING: CPU: 0 PID: 1 at drivers/soc/mediatek/mtk-scpsys.c:457 scpsys_probe+0x35c/0x3a4
- [ 2.465495] Modules linked in:
- [ 2.468595] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.4.124 #0
- [ 2.474687] Hardware name: Mediatek Cortex-A7 (Device Tree)
- [ 2.480356] [<c0109080>] (unwind_backtrace) from [<c0105ddc>] (show_stack+0x10/0x14)
- [ 2.488223] [<c0105ddc>] (show_stack) from [<c0669144>] (dump_stack+0x94/0xa8)
- [ 2.495560] [<c0669144>] (dump_stack) from [<c0117a0c>] (__warn+0xbc/0xd8)
- [ 2.502540] [<c0117a0c>] (__warn) from [<c0117a78>] (warn_slowpath_fmt+0x50/0x94)
- [ 2.510139] [<c0117a78>] (warn_slowpath_fmt) from [<c03ecf50>] (scpsys_probe+0x35c/0x3a4)
- [ 2.518445] [<c03ecf50>] (scpsys_probe) from [<c0412d50>] (platform_drv_probe+0x48/0x98)
- [ 2.526664] [<c0412d50>] (platform_drv_probe) from [<c0411330>] (really_probe+0x1f8/0x360)
- [ 2.535056] [<c0411330>] (really_probe) from [<c0411618>] (driver_probe_device+0x60/0x168)
- [ 2.543448] [<c0411618>] (driver_probe_device) from [<c04118c0>] (device_driver_attach+0x58/0x60)
- [ 2.552457] [<c04118c0>] (device_driver_attach) from [<c0411920>] (__driver_attach+0x58/0xcc)
- [ 2.561112] [<c0411920>] (__driver_attach) from [<c040f7c0>] (bus_for_each_dev+0x68/0x8c)
- [ 2.569416] [<c040f7c0>] (bus_for_each_dev) from [<c0410744>] (bus_add_driver+0x1c8/0x1d8)
- [ 2.577807] [<c0410744>] (bus_add_driver) from [<c0411ed8>] (driver_register+0x74/0x108)
- [ 2.586021] [<c0411ed8>] (driver_register) from [<c01026c4>] (do_one_initcall+0x84/0x1d8)
- [ 2.594325] [<c01026c4>] (do_one_initcall) from [<c0900fcc>] (kernel_init_freeable+0x1c4/0x26c)
- [ 2.603160] [<c0900fcc>] (kernel_init_freeable) from [<c067ee04>] (kernel_init+0x8/0x114)
- [ 2.611463] [<c067ee04>] (kernel_init) from [<c01010e8>] (ret_from_fork+0x14/0x2c)
- [ 2.619145] Exception stack(0xcf42bfb0 to 0xcf42bff8)
- [ 2.624270] bfa0: 00000000 00000000 00000000 00000000
- [ 2.632571] bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
- [ 2.640872] bfe0: 00000000 00000000 00000000 00000000 00000013 00000000
- [ 2.647612] ---[ end trace 096e63627b154e9d ]---
- [ 2.652676] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
- [ 2.660785] printk: console [ttyS0] disabled
- [ 2.685336] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 104, base_baud = 2500000) is a ST16650V2
- [ 2.694753] printk: console [ttyS0] enabled
- [ 2.694753] printk: console [ttyS0] enabled
- [ 2.703127] printk: bootconsole [uart8250] disabled
- [ 2.703127] printk: bootconsole [uart8250] disabled
- [ 2.715509] mtk_rng 1020f000.rng: registered RNG driver
- [ 2.721169] random: fast init done
- [ 2.724743] random: crng init done
- [ 2.728997] Loading iSCSI transport class v2.0-870.
- [ 2.734944] SCSI Media Changer driver v0.25
- [ 2.739662] mtk-ecc 1100e000.ecc: probed
- [ 2.746547] spi-nand spi1.0: Macronix SPI NAND was found.
- [ 2.752067] spi-nand spi1.0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64
- [ 2.765301] 4 fixed-partitions partitions found on MTD device spi1.0
- [ 2.771760] Creating 4 MTD partitions on "spi1.0":
- [ 2.776550] 0x000000000000-0x000000100000 : "Bootloader"
- [ 2.783994] 0x000000100000-0x000000140000 : "Config"
- [ 2.790376] 0x000000140000-0x0000001c0000 : "factory"
- [ 2.797181] 0x0000001c0000-0x0000011c0000 : "firmware"
- [ 2.824116] 2 fit-fw partitions found on MTD device firmware
- [ 2.829854] 0x0000001c0000-0x000000380000 : "kernel"
- [ 2.835502] 0x000000380000-0x0000011c0000 : "rootfs"
- [ 2.841157] mtd: device 5 (rootfs) set to be root filesystem
- [ 2.847858] mtdsplit: squashfs has invalid size in "rootfs"
- [ 2.853969] libphy: Fixed MDIO Bus: probed
- [ 2.881372] libphy: mdio: probed
- [ 2.889522] mtk_soc_eth 1b100000.ethernet: generated random MAC address 16:63:98:08:db:ce
- [ 2.898219] mtk_soc_eth 1b100000.ethernet eth0: mediatek frame engine at 0xd08e0000, irq 111
- [ 2.907302] mtk_soc_eth 1b100000.ethernet: generated random MAC address c2:e2:32:29:ab:97
- [ 2.915949] mtk_soc_eth 1b100000.ethernet eth1: mediatek frame engine at 0xd08e0000, irq 111
- [ 2.926113] mtk-wdt 10212000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0)
- [ 2.934699] NET: Registered protocol family 10
- [ 2.941282] Segment Routing with IPv6
- [ 2.945003] NET: Registered protocol family 17
- [ 2.949480] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
- [ 2.962524] 8021q: 802.1Q VLAN Support v1.8
- [ 2.966762] Registering SWP/SWPB emulation handler
- [ 2.983776] mtk-pcie 1a145000.pcie: host bridge /soc/pcie@1a145000 ranges:
- [ 2.990734] mtk-pcie 1a145000.pcie: MEM 0x20000000..0x2fffffff -> 0x20000000
- [ 3.098234] mtk-pcie 1a145000.pcie: Port1 link down
- [ 3.103356] mtk-pcie 1a145000.pcie: PCI host bridge to bus 0000:00
- [ 3.109534] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 3.115038] pci_bus 0000:00: root bus resource [mem 0x20000000-0x2fffffff]
- [ 3.122651] PCI: bus0: Fast back to back transfers enabled
- [ 3.689843] mt753x gsw@0: LAN/WAN VLAN setting=llllw
- [ 3.695077] mt753x gsw@0: Switch is MediaTek MT7531BE rev 0
- [ 5.195476] xhci-mtk 1a0c0000.usb: xHCI Host Controller
- [ 5.200757] xhci-mtk 1a0c0000.usb: new USB bus registered, assigned bus number 1
- [ 5.209832] xhci-mtk 1a0c0000.usb: hcc params 0x01403f98 hci version 0x110 quirks 0x0000000000210010
- [ 5.219003] xhci-mtk 1a0c0000.usb: irq 109, io mem 0x1a0c0000
- [ 5.225577] hub 1-0:1.0: USB hub found
- [ 5.229554] hub 1-0:1.0: 1 port detected
- [ 5.233886] xhci-mtk 1a0c0000.usb: xHCI Host Controller
- [ 5.239126] xhci-mtk 1a0c0000.usb: new USB bus registered, assigned bus number 2
- [ 5.246583] xhci-mtk 1a0c0000.usb: Host supports USB 3.1 Enhanced SuperSpeed
- [ 5.253971] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 5.262786] hub 2-0:1.0: USB hub found
- [ 5.266734] hub 2-0:1.0: 1 port detected
- [ 5.277044] Freeing unused kernel memory: 6144K
- [ 5.289935] Run /init as init process
- [ 5.433843] init: Console is alive
- [ 5.437391] init: - watchdog -
- [ 5.445558] kmodloader: loading kernel modules from /etc/modules-boot.d/*
- [ 5.456722] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
- [ 5.474351] init: - preinit -
- [ 5.546720] mtk_soc_eth 1b100000.ethernet eth0: configuring for fixed/2500base-x link mode
- [ 5.555506] mtk_soc_eth 1b100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
- [ 5.567509] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- Press the [f] key and hit [enter] to enter failsafe mode
- Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
- [ 6.930214] mt753x gsw@0: Port 0 Link is Up - 1Gbps/Full
- [ 9.640933] procd: - early -
- [ 9.643874] procd: - watchdog -
- [ 10.187447] procd: - watchdog -
- [ 10.190868] procd: - ubus -
- [ 10.245179] procd: - init -
- Please press Enter to activate this console.
- [ 10.518727] kmodloader: loading kernel modules from /etc/modules.d/*
- [ 10.598102] xt_time: kernel timezone is -0000
- [ 10.633169] PPP generic driver version 2.4.2
- [ 10.650881] urngd: v1.0.2 started.
- [ 10.660283] NET: Registered protocol family 24
- [ 10.693021] kmodloader: done loading kernel modules from /etc/modules.d/*
- [ 31.810651] mtk_soc_eth 1b100000.ethernet eth0: Link is Down
- [ 31.847312] mtk_soc_eth 1b100000.ethernet eth0: configuring for fixed/2500base-x link mode
- [ 31.856916] mtk_soc_eth 1b100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
- [ 31.888926] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 31.908157] br-lan: port 1(eth0.1) entered blocking state
- [ 31.913648] br-lan: port 1(eth0.1) entered disabled state
- [ 31.919281] device eth0.1 entered promiscuous mode
- [ 31.924224] device eth0 entered promiscuous mode
- [ 32.015917] br-lan: port 1(eth0.1) entered blocking state
- [ 32.021373] br-lan: port 1(eth0.1) entered forwarding state
- [ 32.102220] mtk_soc_eth 1b100000.ethernet eth1: PHY [mdio-bus:00] driver [Generic PHY]
- [ 32.110254] mtk_soc_eth 1b100000.ethernet eth1: configuring for phy/gmii link mode
- BusyBox v1.33.1 (2021-06-15 10:48:20 UTC) built-in shell (ash)
- _______ ________ __
- | |.-----.-----.-----.| | | |.----.| |_
- | - || _ | -__| || | | || _|| _|
- |_______|| __|_____|__|__||________||__| |____|
- |__| W I R E L E S S F R E E D O M
- -----------------------------------------------------
- OpenWrt SNAPSHOT, r16957-3d026d2425
- -----------------------------------------------------
- === WARNING! =====================================
- There is no root password defined on this device!
- Use the "passwd" command to set up a new password
- in order to prevent unauthorized SSH logins.
- --------------------------------------------------
- root@OpenWrt:/#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement