Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- F0: 102B 0000
- FA: 0000 0000
- V0: 0000 0000 [0001]
- 00: 0000 0000
- BP: 2400 0041 [0000]
- G0: 1190 0000
- EC: 0000 0000 [0000]
- T0: 0000 022A [010F]
- Jump to BL
- NOTICE: BL2: v2.7(release):5afcf8d0c2
- NOTICE: BL2: Built : 07:58:32, Dec 20 2022
- NOTICE: WDT: disabled
- NOTICE: EMI: Using DDR3 settings
- dump toprgu registers data:
- 1001c000 | 00000000 0000ffe0 00000000 00000000
- 1001c010 | 00000fff 00000000 00f00000 00000000
- 1001c020 | 00000000 00000000 00000000 00000000
- 1001c030 | 003c0003 003c0003 00000000 00000000
- 1001c040 | 00000000 00000000 00000000 00000000
- 1001c050 | 00000000 00000000 00000000 00000000
- 1001c060 | 00000000 00000000 00000000 00000000
- 1001c070 | 00000000 00000000 00000000 00000000
- 1001c080 | 00000000 00000000 00000000 00000000
- dump drm registers data:
- 1001d000 | 00000000 00000000 00000000 00000000
- 1001d010 | 00000000 00000000 00000000 00000000
- 1001d020 | 00000000 00000000 00000000 00000000
- 1001d030 | 00a083f1 000003ff 00100000 00000000
- 1001d040 | 00000000 00000000 00020303 000000ff
- 1001d050 | 00000000 00000000 00000000 00000000
- 1001d060 | 00000002 00000000 00000000 00000000
- drm: 500 = 0x8
- [DDR Reserve] ddr reserve mode not be enabled yet
- DDR RESERVE Success 0
- [EMI] ComboMCP not ready, using default setting
- BYTE_swap:0
- BYTE_swap:0
- Window Sum 528, worse bit 0, min window 64
- Window Sum 520, worse bit 9, min window 64
- Window Sum 342, worse bit 1, min window 42
- Window Sum 330, worse bit 10, min window 40
- Window Sum 350, worse bit 3, min window 42
- Window Sum 346, worse bit 8, min window 42
- Window Sum 364, worse bit 3, min window 44
- Window Sum 352, worse bit 8, min window 44
- Window Sum 370, worse bit 6, min window 44
- Window Sum 364, worse bit 8, min window 44
- Window Sum 386, worse bit 5, min window 46
- Window Sum 376, worse bit 9, min window 46
- Window Sum 390, worse bit 2, min window 48
- Window Sum 386, worse bit 9, min window 46
- Window Sum 402, worse bit 6, min window 48
- Window Sum 396, worse bit 8, min window 48
- Window Sum 412, worse bit 4, min window 50
- Window Sum 408, worse bit 8, min window 48
- Window Sum 420, worse bit 0, min window 52
- Window Sum 412, worse bit 8, min window 50
- Window Sum 426, worse bit 0, min window 52
- NOTICE: EMI: Detected DRAM size: 256MB
- NOTICE: EMI: complex R/W mem test passed
- NOTICE: CPU: MT7981 (1300MHz)
- ERROR: No Flash Device Matched
- ERROR: spi nor init fail -22
- NOTICE: BL2: Booting BL31
- NOTICE: BL31: v2.7(release):5afcf8d0c2
- NOTICE: BL31: Built : 07:58:32, Dec 20 2022
- NOTICE: Hello BL31!!!
- U-Boot 2022.07-rc3 (Dec 20 2022 - 07:58:32 +0000), Build: jenkins-WR3000-18
- CPU: MediaTek MT7981
- Model: mt7981-rfb
- DRAM: 256 MiB
- Core: 39 devices, 15 uclasses, devicetree: embed
- Loading Environment from nowhere... OK
- In: serial@11002000
- Out: serial@11002000
- Err: serial@11002000
- Net:
- Warning: ethernet@15100000 (eth0) using random MAC address - ae:25:b9:d6:ea:2a
- eth0: ethernet@15100000
- *** U-Boot Boot Menu ***
- 1. Startup system (Default)
- 2. Upgrade firmware
- 3. Upgrade ATF BL2
- 4. Upgrade ATF FIP
- 5. Upgrade single image
- 6. Load image
- 0. U-Boot console
- Press UP/DOWN to move, ENTER to select, ESC/CTRL+C to quit
- SF: Detected XM25QH128C with page size 256 Bytes, erase size 4 KiB, total 16 MiB
- Reading from 0xf0000 to 0x46000000, size 0x100 ... OK
- Reading from 0xf0000 to 0x46000000, size 0x3309fb ... OK
- ## Loading kernel from FIT Image at 46000000 ...
- Using 'config-1' configuration
- Trying 'kernel-1' kernel subimage
- Description: ARM64 OpenWrt Linux-5.4.219
- Type: Kernel Image
- Compression: lzma compressed
- Data Start: 0x460000c0
- Data Size: 3325489 Bytes = 3.2 MiB
- Architecture: AArch64
- OS: Linux
- Load Address: 0x48080000
- Entry Point: 0x48080000
- Hash algo: crc32
- Hash value: d9121d2e
- Hash algo: sha1
- Hash value: 00a189b2b88c55ba778f86487465069e0e3aa3f3
- Verifying Hash Integrity ... crc32+ sha1+ OK
- ## Loading fdt from FIT Image at 46000000 ...
- Using 'config-1' configuration
- Trying 'fdt-1' fdt subimage
- Description: ARM64 OpenWrt R31 device tree blob
- Type: Flat Device Tree
- Compression: uncompressed
- Data Start: 0x4632c028
- Data Size: 17404 Bytes = 17 KiB
- Architecture: AArch64
- Hash algo: crc32
- Hash value: 831bdb18
- Hash algo: sha1
- Hash value: 1fd7beced2dbd3e5d047d1f015cd74f53097385b
- Verifying Hash Integrity ... crc32+ sha1+ OK
- Booting using the fdt blob at 0x4632c028
- Uncompressing Kernel Image
- Loading Device Tree to 000000004f7f1000, end 000000004f7f83fb ... OK
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
- [ 0.000000] Linux version 5.4.219 (jenkins@release) (gcc version 8.4.0 (OpenWrt GCC 8.4.0 r0-54a4e81b5f)) #0 SMP Sun Jan 8 06:50:27 2023
- [ 0.000000] Machine model: MediaTek MT7981 RFB/R31
- [ 0.000000] earlycon: uart8250 at MMIO32 0x0000000011002000 (options '')
- [ 0.000000] printk: bootconsole [uart8250] enabled
- [ 0.000000] On node 0 totalpages: 64592
- [ 0.000000] DMA32 zone: 1024 pages used for memmap
- [ 0.000000] DMA32 zone: 0 pages reserved
- [ 0.000000] DMA32 zone: 64592 pages, LIFO batch:15
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.1 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.0
- [ 0.000000] percpu: Embedded 20 pages/cpu s44056 r8192 d29672 u81920
- [ 0.000000] pcpu-alloc: s44056 r8192 d29672 u81920 alloc=20*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: detected: GIC system register CPU interface
- [ 0.000000] CPU features: kernel page table isolation disabled by kernel configuration
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 63568
- [ 0.000000] Kernel command line: console=ttyS0,115200n1 loglevel=8 earlycon=uart8250,mmio32,0x11002000
- [ 0.000000] Dentry cache hash table entries: 32768 (order: 6, 262144 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 230792K/258368K available (6846K kernel code, 444K rwdata, 1912K rodata, 448K init, 289K bss, 27576K reserved, 0K cma-reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] rcu: Hierarchical RCU implementation.
- [ 0.000000] rcu: CONFIG_RCU_FANOUT set to non-default value of 32.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
- [ 0.000000] GICv3: 640 SPIs implemented
- [ 0.000000] GICv3: 0 Extended SPIs implemented
- [ 0.000000] GICv3: Distributor has no Range Selector support
- [ 0.000000] GICv3: 16 PPIs implemented
- [ 0.000000] GICv3: no VLPI support, no direct LPI support
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x000000000c080000
- [ 0.000000] arch_timer: cp15 timer(s) running at 13.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2ff89eacb, max_idle_ns: 440795202429 ns
- [ 0.000003] sched_clock: 56 bits at 13MHz, resolution 76ns, wraps every 4398046511101ns
- [ 0.008189] Calibrating delay loop (skipped), value calculated using timer frequency.. 26.00 BogoMIPS (lpj=52000)
- [ 0.018509] pid_max: default: 32768 minimum: 301
- [ 0.023228] Mount-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
- [ 0.030489] Mountpoint-cache hash table entries: 512 (order: 0, 4096 bytes, linear)
- [ 0.039047] ASID allocator initialised with 65536 entries
- [ 0.044548] rcu: Hierarchical SRCU implementation.
- [ 0.049650] smp: Bringing up secondary CPUs ...
- [ 0.054517] Detected VIPT I-cache on CPU1
- [ 0.054537] GICv3: CPU1: found redistributor 1 region 0:0x000000000c0a0000
- [ 0.054558] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
- [ 0.054618] smp: Brought up 1 node, 2 CPUs
- [ 0.076230] SMP: Total of 2 processors activated.
- [ 0.080956] CPU features: detected: 32-bit EL0 Support
- [ 0.086118] CPU features: detected: CRC32 instructions
- [ 0.091384] CPU: All CPU(s) started at EL2
- [ 0.095506] alternatives: patching kernel code
- [ 0.102155] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.111966] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
- [ 0.118860] pinctrl core: initialized pinctrl subsystem
- [ 0.124747] NET: Registered protocol family 16
- [ 0.129420] DMA: preallocated 256 KiB pool for atomic allocations
- [ 0.150730] SCSI subsystem initialized
- [ 0.154668] libata version 3.00 loaded.
- [ 0.158709] usbcore: registered new interface driver usbfs
- [ 0.164367] usbcore: registered new interface driver hub
- [ 0.169745] usbcore: registered new device driver usb
- [ 0.175563] Bluetooth: Core ver 2.22
- [ 0.179205] NET: Registered protocol family 31
- [ 0.183678] Bluetooth: HCI device and connection manager initialized
- [ 0.190069] Bluetooth: HCI socket layer initialized
- [ 0.194970] Bluetooth: L2CAP socket layer initialized
- [ 0.200052] Bluetooth: SCO socket layer initialized
- [ 0.205167] rbus 18000000.wbsys: PCI host bridge to bus 0000:00
- [ 0.211128] pci_bus 0000:00: root bus resource [mem 0x18000000-0x18ffffff]
- [ 0.218040] pci_bus 0000:00: root bus resource [bus 00-ff]
- [ 0.223552] pci_bus 0000:00: scanning bus
- [ 0.227591] pci 0000:00:00.0: [14c3:7981] type 00 class 0x000280
- [ 0.233636] pci 0000:00:00.0: reg 0x10: [mem 0x18000000-0x1800000f 64bit]
- [ 0.240460] pci 0000:00:00.0: reg 0x18: [mem 0x00000000-0x0000000f]
- [ 0.246759] pci 0000:00:00.0: reg 0x1c: [mem 0x00000000-0x0000000f]
- [ 0.253059] pci 0000:00:00.0: reg 0x20: [mem 0x00000000-0x0000000f]
- [ 0.259358] pci 0000:00:00.0: reg 0x24: [mem 0x00000000-0x0000000f]
- [ 0.266470] pci_bus 0000:00: fixups for bus
- [ 0.270682] pci_bus 0000:00: bus scan returning with max=00
- [ 0.277222] clocksource: Switched to clocksource arch_sys_counter
- [ 0.283900] thermal_sys: Registered thermal governor 'fair_share'
- [ 0.283902] thermal_sys: Registered thermal governor 'bang_bang'
- [ 0.290046] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.296084] thermal_sys: Registered thermal governor 'user_space'
- [ 0.302121] thermal_sys: Registered thermal governor 'power_allocator'
- [ 0.308467] NET: Registered protocol family 2
- [ 0.319495] IP idents hash table entries: 4096 (order: 3, 32768 bytes, linear)
- [ 0.327027] tcp_listen_portaddr_hash hash table entries: 256 (order: 0, 4096 bytes, linear)
- [ 0.335440] TCP established hash table entries: 2048 (order: 2, 16384 bytes, linear)
- [ 0.343241] TCP bind hash table entries: 2048 (order: 3, 32768 bytes, linear)
- [ 0.350436] TCP: Hash tables configured (established 2048 bind 2048)
- [ 0.356875] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
- [ 0.363448] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
- [ 0.370541] NET: Registered protocol family 1
- [ 0.374944] PCI: CLS 0 bytes, default 64
- [ 0.379614] workingset: timestamp_bits=46 max_order=16 bucket_order=0
- [ 0.388931] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.394811] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
- [ 0.417570] phy phy-usb-phy@11e10000.1: type_sw - reg 0x218, index 0
- [ 0.432551] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
- [ 0.439620] printk: console [ttyS0] disabled
- [ 0.464037] 11002000.serial: ttyS0 at MMIO 0x11002000 (irq = 12, base_baud = 2500000) is a ST16650V2
- [ 0.473249] printk: console [ttyS0] enabled
- [ 0.473249] printk: console [ttyS0] enabled
- [ 0.481608] printk: bootconsole [uart8250] disabled
- [ 0.481608] printk: bootconsole [uart8250] disabled
- [ 0.491924] cacheinfo: Unable to detect cache hierarchy for CPU 0
- [ 0.500234] loop: module loaded
- [ 0.503509] mediatek,mt2701-ice_debug ice_debug: get dbg_sel clock fail: -2
- [ 0.510474] mediatek,mt2701-ice_debug: probe of ice_debug failed with error -2
- [ 0.518473] mt7981-pinctrl 11d00000.pinctrl: pin_config_set op failed for pin 29
- [ 0.525876] mtk-spi 11009000.spi: Error applying setting, reverse things back
- [ 0.533656] spi-nor spi0.0: calibration result: 0x2
- [ 0.538789] spi-nor spi0.0: XM25QH128C (16384 Kbytes)
- [ 0.544167] 6 fixed-partitions partitions found on MTD device spi0.0
- [ 0.550536] Creating 6 MTD partitions on "spi0.0":
- [ 0.555321] 0x000000000000-0x000000040000 : "BL2"
- [ 0.560545] 0x000000040000-0x000000050000 : "u-boot-env"
- [ 0.566329] 0x000000050000-0x000000060000 : "Factory"
- [ 0.571838] 0x000000060000-0x000000070000 : "bdinfo"
- [ 0.577296] 0x000000070000-0x0000000f0000 : "FIP"
- [ 0.582471] 0x0000000f0000-0x000001000000 : "firmware"
- [ 0.588173] 2 fit-fw partitions found on MTD device firmware
- [ 0.593849] 0x0000000f0000-0x000000430000 : "kernel"
- [ 0.599329] 0x000000430000-0x000001000000 : "rootfs"
- [ 0.604753] mtd: device 7 (rootfs) set to be root filesystem
- [ 0.610461] 1 squashfs-split partitions found on MTD device rootfs
- [ 0.616651] 0x000000d50000-0x000001000000 : "rootfs_data"
- [ 0.623600] [mtk_hw_init] reset_lock:0, force:0
- [ 0.628160] [mtk_hw_init] execute fe cold reset
- [ 0.664257] mtk_soc_eth 15100000.ethernet eth0: mediatek frame engine at 0xffffffc011880000, irq 75
- [ 0.673366] mtk_soc_eth 15100000.ethernet: generated random MAC address 7a:c4:17:74:78:dd
- [ 0.681806] mtk_soc_eth 15100000.ethernet eth1: mediatek frame engine at 0xffffffc011880000, irq 75
- [ 0.690853] (unnamed net_device) (dummy): netif_napi_add() called with weight 256
- [ 0.698626] xhci-mtk 11200000.xhci: 11200000.xhci supply vbus not found, using dummy regulator
- [ 0.707267] xhci-mtk 11200000.xhci: 11200000.xhci supply vusb33 not found, using dummy regulator
- [ 0.716154] phy phy-usb-phy@11e10000.0: try to get sw efuse
- [ 0.721811] xhci-mtk 11200000.xhci: xHCI Host Controller
- [ 0.727195] xhci-mtk 11200000.xhci: new USB bus registered, assigned bus number 1
- [ 0.734748] xhci-mtk 11200000.xhci: hcc params 0x01403f99 hci version 0x110 quirks 0x0000000000210010
- [ 0.743990] xhci-mtk 11200000.xhci: irq 84, io mem 0x11200000
- [ 0.750180] hub 1-0:1.0: USB hub found
- [ 0.754046] hub 1-0:1.0: 1 port detected
- [ 0.758243] xhci-mtk 11200000.xhci: xHCI Host Controller
- [ 0.763562] xhci-mtk 11200000.xhci: new USB bus registered, assigned bus number 2
- [ 0.771042] xhci-mtk 11200000.xhci: Host supports USB 3.2 Enhanced SuperSpeed
- [ 0.778219] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 0.786625] hub 2-0:1.0: USB hub found
- [ 0.790405] hub 2-0:1.0: 1 port detected
- [ 0.794809] usbcore: registered new interface driver uas
- [ 0.800200] usbcore: registered new interface driver usb-storage
- [ 0.806304] i2c /dev entries driver
- [ 0.810700] mtk-wdt 1001c000.watchdog: Watchdog enabled (timeout=31 sec, nowayout=0)
- [ 0.818681] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@redhat.com
- [ 0.827230] Bluetooth: HCI UART driver ver 2.3
- [ 0.831692] Bluetooth: HCI UART protocol H4 registered
- [ 0.836821] Bluetooth: HCI UART protocol BCSP registered
- [ 0.842209] Bluetooth: HCI UART protocol Broadcom registered
- [ 0.847880] Bluetooth: HCI UART protocol QCA registered
- [ 0.855182] NET: Registered protocol family 10
- [ 0.860386] Segment Routing with IPv6
- [ 0.864096] NET: Registered protocol family 17
- [ 0.868600] Bridge firewalling registered
- [ 0.872604] 8021q: 802.1Q VLAN Support v1.8
- [ 1.445255] mt753x gsw@0: LAN/WAN VLAN setting=wllll
- [ 1.450491] mt753x gsw@0: Switch is MediaTek MT7531AE rev 1
- [ 1.460259] mt753x gsw@0: HWSTRAP=0xff XTAL=25MHz
- [ 5.106315] mt753x gsw@0: >>>>>>>>>>>>>>>>>>>>>>>>>>>>> START CALIBRATION:
- [ 5.114295] mt753x gsw@0: -------- gephy-calbration (port:0) --------
- [ 5.129499] CALDLY = 40
- [ 5.191536] 0x1e-e0 = 2929
- [ 5.195939] 0x1f-115 = 5
- [ 5.198464] GE Rext AnaCal Done! (9)(0x29)
- [ 5.262543] GE R50 AnaCal Done! (10) (0x32)(0xb2)
- [ 5.322118] GE R50 AnaCal Done! (10) (0x32)(0xb2)
- [ 5.377138] GE R50 AnaCal Done! (9) (0x34)(0xb4)
- [ 5.436622] GE R50 AnaCal Done! (10) (0x32)(0xb2)
- [ 5.444473] GE 1e_174(0xb2b2), 1e_175(0xb4b2)
- [ 5.490856] GE Tx offset AnaCal Done! (pair-0)(4)(0x23) 0x1e_172=0x2320
- [ 5.538496] GE Tx offset AnaCal Done! (pair-1)(7)(0x26) 0x1e_172=0x2326
- [ 5.590695] GE Tx offset AnaCal Done! (pair-2)(8)(0x27) 0x1e_173=0x2720
- [ 5.629229] GE Tx offset AnaCal Done! (pair-3)(5)(0x24) 0x1e_173=0x2724
- [ 5.709550] GE Tx amp AnaCal Done! (pair-0)(1e_12 = 0x681a)
- [ 5.764506] GE Tx amp AnaCal Done! (pair-1)(1e_17 = 0x1c1c)
- [ 5.822906] GE Tx amp AnaCal Done! (pair-2)(1e_19 = 0x1c24)
- [ 5.853003] GE Tx amp AnaCal Done! (pair-3)(1e_21 = 0x161e)
- [ 5.899713] PORT 0 RX_DC_OFFSET
- [ 5.912380] before pairA output = 1e
- [ 5.917730] after pairA output = 0
- [ 5.922821] before pairB output = f
- [ 5.928084] after pairB output = 1
- [ 5.933180] before pairC output = f
- [ 5.938443] after pairC output = 1
- [ 5.943539] before pairD output = f
- [ 5.948804] after pairD output = ff
- [ 5.952541] mt753x gsw@0: -------- gephy-calbration (port:1) --------
- [ 5.967743] CALDLY = 40
- [ 6.025310] GE R50 AnaCal Done! (10) (0x32)(0xb2)
- [ 6.080325] GE R50 AnaCal Done! (9) (0x34)(0xb4)
- [ 6.130701] GE R50 AnaCal Done! (8) (0x35)(0xb5)
- [ 6.190191] GE R50 AnaCal Done! (10) (0x32)(0xb2)
- [ 6.198041] GE 1e_174(0xb2b4), 1e_175(0xb5b2)
- [ 6.235313] GE Tx offset AnaCal Done! (pair-0)(2)(0x21) 0x1e_172=0x2120
- [ 6.269294] GE Tx offset AnaCal Done! (pair-1)(4)(0x23) 0x1e_172=0x2123
- [ 6.298720] GE Tx offset AnaCal Done! (pair-2)(3)(0x3) 0x1e_173=0x320
- [ 6.327968] GE Tx offset AnaCal Done! (pair-3)(3)(0x22) 0x1e_173=0x322
- [ 6.391211] GE Tx amp AnaCal Done! (pair-0)(1e_12 = 0x5816)
- [ 6.423516] GE Tx amp AnaCal Done! (pair-1)(1e_17 = 0x1919)
- [ 6.453606] GE Tx amp AnaCal Done! (pair-2)(1e_19 = 0x161e)
- [ 6.512004] GE Tx amp AnaCal Done! (pair-3)(1e_21 = 0x1d25)
- [ 6.558712] PORT 1 RX_DC_OFFSET
- [ 6.571379] before pairA output = 1e
- [ 6.576728] after pairA output = 0
- [ 6.581824] before pairB output = 1d
- [ 6.587174] after pairB output = fe
- [ 6.592356] before pairC output = f
- [ 6.597619] after pairC output = 1
- [ 6.602713] before pairD output = d
- [ 6.607976] after pairD output = 1
- [ 6.611626] mt753x gsw@0: -------- gephy-calbration (port:2) --------
- [ 6.626830] CALDLY = 40
- [ 6.684395] GE R50 AnaCal Done! (10) (0x32)(0xb2)
- [ 6.743966] GE R50 AnaCal Done! (10) (0x32)(0xb2)
- [ 6.803541] GE R50 AnaCal Done! (10) (0x32)(0xb2)
- [ 6.863116] GE R50 AnaCal Done! (10) (0x32)(0xb2)
- [ 6.870969] GE 1e_174(0xb2b2), 1e_175(0xb2b2)
- [ 6.926459] GE Tx offset AnaCal Done! (pair-0)(6)(0x25) 0x1e_172=0x2520
- [ 6.960440] GE Tx offset AnaCal Done! (pair-1)(4)(0x23) 0x1e_172=0x2523
- [ 6.989864] GE Tx offset AnaCal Done! (pair-2)(3)(0x22) 0x1e_173=0x2220
- [ 7.023843] GE Tx offset AnaCal Done! (pair-3)(4)(0x4) 0x1e_173=0x2204
- [ 7.092751] GE Tx amp AnaCal Done! (pair-0)(1e_12 = 0x681a)
- [ 7.142044] GE Tx amp AnaCal Done! (pair-1)(1e_17 = 0x1b1b)
- [ 7.177805] GE Tx amp AnaCal Done! (pair-2)(1e_19 = 0x161e)
- [ 7.219224] GE Tx amp AnaCal Done! (pair-3)(1e_21 = 0x1a22)
- [ 7.265932] PORT 2 RX_DC_OFFSET
- [ 7.278599] before pairA output = f
- [ 7.283862] after pairA output = ff
- [ 7.289043] before pairB output = f
- [ 7.294307] after pairB output = 0
- [ 7.299402] before pairC output = e
- [ 7.304665] after pairC output = 0
- [ 7.309760] before pairD output = 1e
- [ 7.315109] after pairD output = 1
- [ 7.318758] mt753x gsw@0: -------- gephy-calbration (port:3) --------
- [ 7.333961] CALDLY = 40
- [ 7.400633] GE R50 AnaCal Done! (12) (0x30)(0xb0)
- [ 7.464756] GE R50 AnaCal Done! (11) (0x31)(0xb1)
- [ 7.537991] GE R50 AnaCal Done! (13) (0x26)(0xa6)
- [ 7.606673] GE R50 AnaCal Done! (12) (0x30)(0xb0)
- [ 7.614523] GE 1e_174(0xb0b1), 1e_175(0xa6b0)
- [ 7.679122] GE Tx offset AnaCal Done! (pair-0)(8)(0x27) 0x1e_172=0x2720
- [ 7.708548] GE Tx offset AnaCal Done! (pair-1)(3)(0x22) 0x1e_172=0x2722
- [ 7.733416] GE Tx offset AnaCal Done! (pair-2)(2)(0x2) 0x1e_173=0x220
- [ 7.762663] GE Tx offset AnaCal Done! (pair-3)(3)(0x22) 0x1e_173=0x222
- [ 7.837237] GE Tx amp AnaCal Done! (pair-0)(1e_12 = 0x5415)
- [ 7.875203] GE Tx amp AnaCal Done! (pair-1)(1e_17 = 0x1616)
- [ 7.905301] GE Tx amp AnaCal Done! (pair-2)(1e_19 = 0x1921)
- [ 7.992012] GE Tx amp AnaCal Done! (pair-3)(1e_21 = 0x232b)
- [ 8.038719] PORT 3 RX_DC_OFFSET
- [ 8.051387] before pairA output = e
- [ 8.056650] after pairA output = fe
- [ 8.061833] before pairB output = 1d
- [ 8.067182] after pairB output = ff
- [ 8.072364] before pairC output = f
- [ 8.077627] after pairC output = ff
- [ 8.082806] before pairD output = 1d
- [ 8.088154] after pairD output = fe
- [ 8.091891] mt753x gsw@0: -------- gephy-calbration (port:4) --------
- [ 8.107093] CALDLY = 40
- [ 8.160107] GE R50 AnaCal Done! (9) (0x34)(0xb4)
- [ 8.210486] GE R50 AnaCal Done! (8) (0x35)(0xb5)
- [ 8.260862] GE R50 AnaCal Done! (8) (0x35)(0xb5)
- [ 8.315788] GE R50 AnaCal Done! (9) (0x34)(0xb4)
- [ 8.323551] GE 1e_174(0xb4b5), 1e_175(0xb5b4)
- [ 8.369927] GE Tx offset AnaCal Done! (pair-0)(4)(0x4) 0x1e_172=0x420
- [ 8.394620] GE Tx offset AnaCal Done! (pair-1)(2)(0x21) 0x1e_172=0x421
- [ 8.423955] GE Tx offset AnaCal Done! (pair-2)(3)(0x22) 0x1e_173=0x2220
- [ 8.444269] GE Tx offset AnaCal Done! (pair-3)(1)(0x1) 0x1e_173=0x2201
- [ 8.552817] GE Tx amp AnaCal Done! (pair-0)(1e_12 = 0x3c0f)
- [ 8.607771] GE Tx amp AnaCal Done! (pair-1)(1e_17 = 0x1212)
- [ 8.683161] GE Tx amp AnaCal Done! (pair-2)(1e_19 = 0xf17)
- [ 8.724491] GE Tx amp AnaCal Done! (pair-3)(1e_21 = 0x151d)
- [ 8.771202] PORT 4 RX_DC_OFFSET
- [ 8.783869] before pairA output = d
- [ 8.789132] after pairA output = 0
- [ 8.794230] before pairB output = c
- [ 8.799492] after pairB output = 0
- [ 8.804589] before pairC output = 1e
- [ 8.809938] after pairC output = 1
- [ 8.815033] before pairD output = f
- [ 8.820295] after pairD output = ff
- [ 8.826059] hctosys: unable to open rtc device (rtc0)
- [ 8.832411] VFS: Mounted root (squashfs filesystem) readonly on device 31:7.
- [ 8.839676] Freeing unused kernel memory: 448K
- [ 8.857256] Run /sbin/init as init process
- [ 9.058635] init: Console is alive
- [ 9.062165] init: - watchdog -
- [ 9.428763] kmodloader: loading kernel modules from /etc/modules-boot.d/*
- [ 9.450219] conninfra@(mtk_conninfra_drv_init:644) Before platform_driver_register
- [ 9.457898] Get Index(0-TOP_MISC_BASE) phy_addr(0x11d10000) vir_addr=(0xffffffc010add000) size=(0x1000)
- [ 9.467286] Get Index(1-TOPRGU_BASE) phy_addr(0x1001c000) vir_addr=(0xffffffc010ae5000) size=(0x1000)
- [ 9.476494] Get Index(2-GPIO_BASE) phy_addr(0x11d00000) vir_addr=(0xffffffc010ae7000) size=(0x1000)
- [ 9.485527] Get Index(3-IOCFG_TR_BASE) phy_addr(0x11f00000) vir_addr=(0xffffffc010ae9000) size=(0x1000)
- [ 9.494908] Get Index(4-IOCFG_TL_BASE) phy_addr(0x11f10000) vir_addr=(0xffffffc010aeb000) size=(0x1000)
- [ 9.504292] Get Index(5-INFRACFG_AO_BASE) phy_addr(0x10003000) vir_addr=(0xffffffc010aed000) size=(0x1000)
- [ 9.513933] Get Index(6-CONN_INFRA_CFG_BASE) phy_addr(0x18001000) vir_addr=(0xffffffc010aef000) size=(0x1000)
- [ 9.523835] Get Index(7-CONN_INFRA_SYSRAM_BASE) phy_addr(0x18050000) vir_addr=(0xffffffc010af1000) size=(0x1000)
- [ 9.533995] Get Index(8-CONN_INFRA_CLKGEN_ON_TOP_BASE) phy_addr(0x18009000) vir_addr=(0xffffffc010af3000) size=(0x1000)
- [ 9.544763] Get Index(9-CONN_HOST_CSR_TOP_BASE) phy_addr(0x18060000) vir_addr=(0xffffffc010af5000) size=(0x1000)
- [ 9.554925] Get Index(10-CONN_INFRA_BUS_CR_BASE) phy_addr(0x1800e000) vir_addr=(0xffffffc010afd000) size=(0x1000)
- [ 9.565173] Get Index(11-CONN_INFRA_RGU_BASE) phy_addr(0x18000000) vir_addr=(0xffffffc010aff000) size=(0x1000)
- [ 9.575160] Get Index(12-CONN_WT_SLP_CTL_REG_BASE) phy_addr(0x18005000) vir_addr=(0xffffffc010b01000) size=(0x1000)
- [ 9.585582] Get Index(13-INST2_CONN_WT_SLP_CTL_REG_BASE) phy_addr(0x18085000) vir_addr=(0xffffffc010b03000) size=(0x1000)
- [ 9.596523] Get Index(14-CONN_RF_SPI_MST_REG_BASE) phy_addr(0x18004000) vir_addr=(0xffffffc010b05000) size=(0x1000)
- [ 9.606947] Get Index(15-INST2_CONN_RF_SPI_MST_REG_BASE) phy_addr(0x18084000) vir_addr=(0xffffffc010b4e000) size=(0x1000)
- [ 9.617891] Get Index(16-CONN_SEMAPHORE_BASE) phy_addr(0x18070000) vir_addr=(0xffffffc010b80000) size=(0x10000)
- [ 9.627967] Get Index(17-CONN_AFE_CTL_BASE) phy_addr(0x18003000) vir_addr=(0xffffffc010b50000) size=(0x1000)
- [ 9.637783] Get Index(18-CONN_AFE_CTL_2ND_BASE) phy_addr(0x18083000) vir_addr=(0xffffffc010b52000) size=(0x1000)
- [ 9.647945] Get Index(19-WF_TOP_SLPPROT_ON_BASE) phy_addr(0x184c0000) vir_addr=(0xffffffc010ba0000) size=(0x10000)
- [ 9.658279] Get Index(20-WF_TOP_CFG_BASE) phy_addr(0x184b0000) vir_addr=(0xffffffc010b54000) size=(0x1000)
- [ 9.667920] Get Index(21-WF_MCU_CONFIG_LS_BASE) phy_addr(0x184f0000) vir_addr=(0xffffffc010b56000) size=(0x1000)
- [ 9.678081] Get Index(22-WF_MCU_BUS_CR_BASE) phy_addr(0x18400000) vir_addr=(0xffffffc010b58000) size=(0x1000)
- [ 9.687982] Get Index(23-WF_MCUSYS_INFRA_BUS_FULL_U_DEBUG_CTRL_AO_BASE) phy_addr(0x18500000) vir_addr=(0xffffffc010b5a000) size=(0x1000)
- [ 9.700226] Get Index(24-WF_TOP_CFG_ON_BASE) phy_addr(0x184c0000) vir_addr=(0xffffffc010bc0000) size=(0x10000)
- [ 9.710215] conninfra@(consys_plt_hw_init:162) adie_cfg_type = 1, one_adie_dbdc = 1
- [ 9.717864] [emi_mng_init] gConEmiPhyBase = [0x47c80000] size = [0x100000] fw size = [0x100000] ops=[(____ptrval____)]
- [ 9.728637] conninfra@(mtk_conninfra_drv_init:650) After platform_driver_register
- [ 9.736512] ConnInfra Dev: init (0)
- [ 9.741446] conninfra@(_consys_polling_chipid_int:306) Read CONNSYS HW IP version successfully! (0x02090000)
- [ 9.751284] conninfra@(connsys_d_die_cfg:365) D-die efuse: 0x00000000
- [ 9.758739] conninfra@(_connsys_a_die_cfg_7976:919) adie_idx[0], A-die CHIP ID = 0x7976, HW Version = 0x8a10
- [ 9.769558] conninfra@(consys_spi_write_nolock:501) addr=0x0a00, val=0xffffffff
- [ 9.777862] conninfra@(consys_spi_write_nolock:501) addr=0x04ac, val=0x0000001c
- [ 9.786165] conninfra@(consys_spi_write_nolock:501) addr=0x0144, val=0x00000002
- [ 9.795475] conninfra@(consys_spi_write_nolock:501) addr=0x0148, val=0x00000000
- [ 9.804786] conninfra@(consys_spi_write_nolock:501) addr=0x0148, val=0x43a60000
- [ 9.818125] conninfra@(connsys_a_die_efuse_read_nolock:737) efuse = [0x00000001, 0x00c40000, 0x008700c3, 0x00000000]
- [ 9.829636] conninfra@(consys_spi_write_nolock:501) addr=0x0144, val=0x00000002
- [ 9.838949] conninfra@(consys_spi_write_nolock:501) addr=0x0148, val=0x23a6003a
- [ 9.848259] conninfra@(consys_spi_write_nolock:501) addr=0x0148, val=0x63a7003a
- [ 9.861599] conninfra@(connsys_a_die_efuse_read_nolock:737) efuse = [0x00000001, 0x00c40000, 0x008700c3, 0x00000000]
- [ 9.873110] conninfra@(consys_spi_write_nolock:501) addr=0x0144, val=0x00000002
- [ 9.882420] conninfra@(consys_spi_write_nolock:501) addr=0x0148, val=0x23a7003a
- [ 9.891729] conninfra@(consys_spi_write_nolock:501) addr=0x0148, val=0x63ac003a
- [ 9.905072] conninfra@(connsys_a_die_efuse_read_nolock:737) efuse = [0x00000001, 0x00c40000, 0x008700c3, 0x00000000]
- [ 9.916584] conninfra@(consys_spi_write_nolock:501) addr=0x0038, val=0x4a563b00
- [ 9.924887] conninfra@(consys_spi_write_nolock:501) addr=0x065c, val=0x1d59080f
- [ 9.933191] conninfra@(consys_spi_write_nolock:501) addr=0x0664, val=0x34c00fe0
- [ 9.941499] conninfra@(consys_spi_write_nolock:501) addr=0x0070, val=0x88888005
- [ 9.950761] conninfra@(consys_spi_write_nolock:501) addr=0x0070, val=0x00000005
- [ 9.958997] conninfra@(_consys_polling_chipid_int:306) Read CONNSYS HW IP version successfully! (0x02090000)
- [ 9.968811] conninfra@(_consys_hw_conninfra_wakeup:470) conninfra_wakeup refcnt=[0]->[1] wakeup!!
- [ 9.977677] conninfra@(_consys_hw_conninfra_sleep:490) conninfra_sleep refcnt=[1]->[0] sleep!!
- [ 9.986277] conninfra@(opfunc_power_on_internal:241) [Conninfra Pwr On] BT=[0] FM=[0] GPS=[0] WF=[0] CONNINFRA=[1]
- [ 10.000116] mediatek_soc_hnat 15100000.hnat: wan = eth1
- [ 10.005356] mediatek_soc_hnat 15100000.hnat: lan = eth0
- [ 10.010577] mediatek_soc_hnat 15100000.hnat: ppd = eth0
- [ 10.015793] mediatek_soc_hnat 15100000.hnat: gmac num = 2
- [ 10.021184] mediatek_soc_hnat 15100000.hnat: ppe num = 1
- [ 10.026903] mediatek_soc_hnat 15100000.hnat: PPE0 entry number = 8192
- [ 10.043667] mediatek_soc_hnat 15100000.hnat: PPE0 hwnat start
- [ 10.049456] hnat roaming work enable
- [ 10.055991] warp_module_init(): module init and register callback for warp
- [ 10.062908] create warp_ctrl ok!!!
- [ 10.066356] wed_get_slot_map(): assign slot_id:0 for entry: 0!
- [ 10.072199] wed_get_slot_map(): assign slot_id:1 for entry: 1!
- [ 10.078517] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
- [ 10.096121] init: - preinit -
- [ 10.355860] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode
- [ 10.364184] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
- [ 10.380715] random: procd: uninitialized urandom read (4 bytes read)
- [ 10.441589] jffs2: notice: (762) jffs2_build_xattr_subsystem: complete building xattr subsystem, 73 of xdatum (40 unchecked, 32 orphan) and 91 of xref (6 dead, 30 orphan) found.
- [ 10.459304] mount_root: switching to jffs2 overlay
- [ 10.472506] overlayfs: upper fs does not support tmpfile.
- [ 10.478608] overlayfs: "xino" feature enabled using 32 upper inode bits.
- [ 10.488150] urandom-seed: Seeding with /etc/urandom.seed
- [ 10.562625] procd: - early -
- [ 10.565570] procd: - watchdog -
- [ 11.121540] procd: - watchdog -
- [ 11.125357] procd: - ubus -
- [ 11.167377] random: ubusd: uninitialized urandom read (4 bytes read)
- [ 11.178433] random: ubusd: uninitialized urandom read (4 bytes read)
- [ 11.186995] procd: - init -
- [ 11.399581] random: jshn: uninitialized urandom read (4 bytes read)
- [ 11.408487] random: ubusd: uninitialized urandom read (4 bytes read)
- [ 11.414962] random: ubus: uninitialized urandom read (4 bytes read)
- [ 11.486101] urngd: v1.0.2 started.
- [ 11.513241] random: crng init done
- [ 11.516641] random: 21 urandom warning(s) missed due to ratelimiting
- [ 11.522774] kmodloader: loading kernel modules from /etc/modules.d/*
- [ 11.542849] l2tp_core: L2TP core driver, V2.0
- [ 11.548134] l2tp_netlink: L2TP netlink interface
- [ 11.553879] nat46: module (version 362640b41ae52b732d9e9729e61ac555492442a3) loaded.
- [ 11.563184] gre: GRE over IPv4 demultiplexor driver
- [ 11.569130] ip_gre: GRE over IPv4 tunneling driver
- [ 11.606759] GACT probability on
- [ 11.610522] Mirror/redirect action on
- [ 11.618037] u32 classifier
- [ 11.620739] input device check on
- [ 11.624418] Actions configured
- [ 12.632835] mt_wifi: module license 'Proprietary' taints kernel.
- [ 12.638857] Disabling lock debugging due to kernel taint
- [ 12.680686] conninfra@(conninfra_pwr_on:120) [conninfra_pwr_on] drv=[3]
- [ 12.688272] conninfra@(_consys_polling_chipid_int:306) Read CONNSYS HW IP version successfully! (0x02090000)
- [ 12.706131] Adie Type: 0x7976
- [ 12.706133] SKU Type: 3000
- [ 12.710050] conninfra@(opfunc_power_on_internal:241) [Conninfra Pwr On] BT=[0] FM=[0] GPS=[0] WF=[1] CONNINFRA=[1]
- [ 12.735536] WiFi@C12L1,get_dbg_setting_by_profile() 4310: debug level setting=INDEX0_debug_level not found!!
- [ 12.745385] WiFi@C12L1,get_dbg_setting_by_profile() 4333: debug option setting=INDEX0_debug_option not found!!
- [ 12.755434] mt_rbus 0000:00:00.0: runtime IRQ mapping not provided by arch
- [ 12.768738] mt7981_init()-->
- [ 12.771642] Use the default iPAiLNA bin image!
- [ 12.776119] <--mt7981_init()
- [ 12.779134] WiFi@C12L1,match_index_by_chipname() 566: not find chip name INDEX1
- [ 12.786455] WiFi@C12L1,match_index_by_chipname() 566: not find chip name INDEX2
- [ 12.793772] WiFi@C12L1,match_index_by_chipname() 566: not find chip name INDEX3
- [ 12.801091] WiFi@C12L1,match_index_by_chipname() 566: not find chip name INDEX4
- [ 12.808406] WiFi@C12L1,match_index_by_chipname() 566: not find chip name INDEX5
- [ 12.815721] WiFi@C12L1,match_index_by_chipname() 566: not find chip name INDEX6
- [ 12.823036] WiFi@C12L1,match_index_by_chipname() 566: not find chip name INDEX7
- [ 12.830351] WiFi@C12L1,match_index_by_chipname() 566: not find chip name INDEX8
- [ 12.837666] WiFi@C12L1,match_index_by_chipname() 566: not find chip name INDEX9
- [ 12.845180] mt7981 nlwifi attach OK
- [ 12.856920] mtk_warp_proxy: module uses symbols from proprietary module mt_wifi, inheriting taint.
- [ 12.915414] xt_time: kernel timezone is -0000
- [ 12.923351] PPP generic driver version 2.4.2
- [ 12.928514] PPP MPPE Compression module registered
- [ 12.934316] NET: Registered protocol family 24
- [ 12.939613] PPTP driver version 0.8.5
- [ 12.945256] l2tp_ppp: PPPoL2TP kernel driver, V2.0
- [ 12.951931] kmodloader: done loading kernel modules from /etc/modules.d/*
- [ 13.017506] client_get_axi_slot_id(): wrong BUS_TYPE
- [ 13.022513] warp_cap_support(): chip_id=7981 is in WHNAT support list
- [ 13.028966] warp_entry_acquire(): bus slot:0, hook to WARP, entry id=0, entry: 0000000046f1c519
- [ 13.037666] client_hif_specific_get(): hw->base_phy_addr 0x18000000!!
- [ 13.044116] client_chip_specific_get(): 0x7981 chip id 0x7981!!
- [ 13.050129] warp_entry_get_by_pdev(): return entry[0]
- [ 13.055336] warp_msg_register():warp,pid,1582,id,0,wed_idx,0
- [ 13.061000] warp_dev0 15010000.wed: Using 32bit DMA for streaming map
- [ 13.067442] warp_dev0 15010000.wed: Using 32bit DMA for coherent map
- [ 13.073814] wed_init(0): res_start = 0x15010000, size = 1000, irq=7,base_addr=0xffffffc010bfa000
- [ 13.082951] wed_ring_init(): wed tx ring init result = 0
- [ 13.088426] wed_ring_init(): wed rx ring init result = 0
- [ 13.095582] create wed ok!!!
- [ 13.098500] wdma_init(): wdma(0) base_addr=0xffffffc010e0e800, base_phy_addr=0x15104800
- [ 13.107183] warp_woif_bus_init_hw(): bus:000000004cdf35ff, txring: 20, pa: 0x000000004724c000, 0x000000004724c000, 24, 28, 3c
- [ 13.118484] warp_woif_bus_init_hw(): bus:000000004cdf35ff, rxring: 50, pa: 0x0000000047248000, 0x0000000047248000, 54, 58, 6c
- [ 13.129800] get_region_info(): wed_idx = 0, base_addr = 0x00000000e462cf4f, size = 0x40000, res.start = 0x47d80000, shared:0
- [ 13.141014] get_region_info(): wed_idx = 0, base_addr = 0x00000000809b339a, size = 0x8000, res.start = 0x151e0000, shared:0
- [ 13.152165] get_region_info(): wed_idx = 0, base_addr = 0x0000000045bc5f1d, size = 0x240000, res.start = 0x47dc0000, shared:1
- [ 13.163464] get_region_info(): wed_idx = 0, base_addr = 0x00000000b216bd50, size = 0x1000, res.start = 0x15194000, shared:0
- [ 13.174577] warp_fwdl_mcu_mode(): mcu mode, need fwdl
- [ 13.216946] ########## WO Firmware ##########
- [ 13.221348] Chip ID: 0x0000
- [ 13.224130] ECO version:0
- [ 13.226750] Version: DEV_000000
- [ 13.229886] Build date: 20220901175230
- [ 13.233627] Total region:3
- [ 13.236319] #################################
- [ 13.240667] Parsing tailer region 0
- [ 13.244147] Target address: 0x151e0000
- [ 13.247974] Download size: 20768
- [ 13.251308] Parsing tailer region 1
- [ 13.254788] Target address: 0x47d80000
- [ 13.258615] Download size: 86224
- [ 13.262001] Parsing tailer region 2
- [ 13.265483] Target address: 0x47dc0000
- [ 13.269310] Download size: 2319824
- [ 13.274723] warp_fwdl_ready_check_mcu_mode(): waiting for wocpu
- [ 13.295262] warp_fwdl_ready_check_mcu_mode(): wocpu is ready
- [ 13.300930] warp_woctrl_init_state(), wo_state: WO_STATE_ENABLE
- [ 13.306849] wo_proc_init done 000000008e6750a3
- [ 13.311372] wo_exep_proc_init done 000000008e6750a3
- [ 13.316352] wo_exception_init(0): exp log= 0x00000000e7d8ae12, phy_addr= 0x00000000472e8000 size= 32768
- [ 13.417776] WiFi@C12L1,RTMPWirelessModeCfg() 611: Init: BSS0 PhyMode=78
- [ 13.424394] WiFi@C12L1,RTMPWirelessModeCfg() 611: Init: BSS1 PhyMode=78
- [ 13.431007] WiFi@C12L1,RTMPWirelessModeCfg() 611: Init: BSS2 PhyMode=78
- [ 13.437614] WiFi@C12L1,RTMPWirelessModeCfg() 611: Init: BSS3 PhyMode=177
- [ 13.444307] WiFi@C12L1,RTMPWirelessModeCfg() 611: Init: BSS4 PhyMode=177
- [ 13.451000] WiFi@C12L1,RTMPWirelessModeCfg() 611: Init: BSS5 PhyMode=177
- [ 13.506952] WiFi@C15L1,Set_PMFMFPC_Proc() 1722: [PMF] :: apidx=0, Desired MFPC=1
- [ 13.514342] WiFi@C15L1,Set_PMFMFPC_Proc() 1722: [PMF] :: apidx=1, Desired MFPC=1
- [ 13.521736] WiFi@C15L1,Set_PMFMFPC_Proc() 1722: [PMF] :: apidx=2, Desired MFPC=1
- [ 13.529122] WiFi@C15L1,Set_PMFMFPC_Proc() 1722: [PMF] :: apidx=3, Desired MFPC=1
- [ 13.536508] WiFi@C15L1,Set_PMFMFPC_Proc() 1722: [PMF] :: apidx=4, Desired MFPC=1
- [ 13.543895] WiFi@C15L1,Set_PMFMFPC_Proc() 1722: [PMF] :: apidx=5, Desired MFPC=1
- [ 13.557515] WiFi@C12L1,rtmp_read_ap_client_from_file() 1639: APCLI[0] ApCliMuMimoDlEnable = 0
- [ 13.566030] WiFi@C12L1,rtmp_read_ap_client_from_file() 1639: APCLI[1] ApCliMuMimoDlEnable = 0
- [ 13.574723] WiFi@C12L1,rtmp_read_ap_client_from_file() 1658: APCLI[0] ApCliMuMimoUlEnable = 0
- [ 13.583238] WiFi@C12L1,rtmp_read_ap_client_from_file() 1658: APCLI[1] ApCliMuMimoUlEnable = 0
- [ 13.592120] WiFi@C03L1,AndesSendCmdMsg() 754: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD
- [ 13.603329] WiFi@C03L1,AndesSendCmdMsg() 754: Could not send in band command due to diablefRTMP_ADAPTER_MCU_SEND_IN_BAND_CMD
- [ 13.688420] wdma_dma_ctrl(): WDMA_GLO_CFG=50404e70, txrx = 0
- [ 13.697450] wdma_dma_ctrl(): WDMA_GLO_CFG=40404e70, txrx = 0
- [ 13.710989] warp_tx_ring_init_hw(): configure ring 0 setting
- [ 13.716661] warp_tx_ring_init_hw(): wed:0000000077fced82 wifi:000000007fb83463: 24420=47358000,24424=2048,24428=0
- [ 13.726911] warp_tx_ring_init_hw(): configure ring 1 setting
- [ 13.732563] warp_tx_ring_init_hw(): wed:0000000077fced82 wifi:000000007fb83463: 24430=47360000,24434=2048,24438=0
- [ 13.742937] set_rrocfg,0
- [ 13.768330] wdma_dma_ctrl(): WDMA_GLO_CFG=40404e74, txrx = 3
- [ 13.773979] using E1 ROM patch
- [ 13.777019] using E1 RAM
- [ 13.779550] current sync CR = 0x1
- [ 13.782858] Built date: 20220901174831a
- [ 13.786780] Platform: ALPS
- [ 13.789568] HW/SW version: 0x8a108a10
- [ 13.793310] Patch version: 0xffffffff
- [ 13.801017] current sync CR = 0x1
- [ 13.804329] Chip ID: 0x14
- [ 13.807029] Eco version: 0x00
- [ 13.810077] Region number: 0x0b
- [ 13.813298] Format version: 0x02
- [ 13.816600] Format flag: 0x01
- [ 13.819646] Ram version: ____000000
- [ 13.823216] Built date: 20220901174855
- [ 13.827049] Common crc: 0x62c52fee
- [ 13.830530] Release info: header tag = 0, total length = 64
- [ 13.836181] tag 1, padding length = 1, tag length = 59
- [ 13.841395] payload: t-neptune-main-mt7915-1953-MT7981_MP2111_IMP-20220901174750
- [ 13.869281] Chip ID: 0x00
- [ 13.871986] Eco version: 0x00
- [ 13.875041] Region number: 0x03
- [ 13.878264] Format version: 0x02
- [ 13.881571] Format flag: 0x01
- [ 13.884613] Ram version: DEV_000000
- [ 13.888183] Built date: 20220901175135
- [ 13.892018] Common crc: 0xdc1c7789
- [ 13.895503] Release info: header tag = 0, total length = 0
- [ 13.979684] current sync CR = 0x7
- [ 13.983031] efuse_probe: efuse = deaddead
- [ 13.992131] WiFi@C02L1,is_cal_free_ic() 831: [a-die version:1]
- [ 16.267023] WiFi@C17L1,RTMPReadTxPwrPerRate() 450: (450): Don't Support this now!
- [ 16.274541] WiFi@C01L1,AntCfgInit() 3121: Not support for HIF_MT yet!
- [ 16.298708] WiFi@C17L1,tx_pwr_comp_init() 641: NotSupportYet!
- [ 16.304529] WiFi@C12L1,SCS_init() 880: INIT SCSEnable [0]= 1
- [ 16.310199] WiFi@C12L1,SCS_init() 887: INIT SCSEnable [1]= 0
- [ 16.316137] WiFi@C14L1,IPMacTable_init() 348: IPMacTable already inited!
- [ 16.342996] wdma_dma_ctrl(): WDMA_GLO_CFG=50804e75, txrx = 3
- [ 16.348952] WiFi@C00L1,set_ack_timeout_mode_byband() 13359: CTS/ACK Timeout Range should between [0xFFFF:0]!!
- [ 16.358856] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13447: DAT config band(0) cck_timeout Fail!
- [ 16.367544] WiFi@C00L1,set_ack_timeout_mode_byband() 13359: CTS/ACK Timeout Range should between [0xFFFF:0]!!
- [ 16.377446] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13458: DAT config band(0) ofdm_timeout Fail!
- [ 16.386220] WiFi@C00L1,set_ack_timeout_mode_byband() 13359: CTS/ACK Timeout Range should between [0xFFFF:0]!!
- [ 16.396122] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13469: DAT config band(0) ofdma_timeout Fail!
- [ 16.404983] WiFi@C00L1,set_ack_timeout_mode_byband() 13359: CTS/ACK Timeout Range should between [0xFFFF:0]!!
- [ 16.414884] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13447: DAT config band(1) cck_timeout Fail!
- [ 16.423571] WiFi@C00L1,set_ack_timeout_mode_byband() 13359: CTS/ACK Timeout Range should between [0xFFFF:0]!!
- [ 16.433472] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13458: DAT config band(1) ofdm_timeout Fail!
- [ 16.442246] WiFi@C00L1,set_ack_timeout_mode_byband() 13359: CTS/ACK Timeout Range should between [0xFFFF:0]!!
- [ 16.452147] WiFi@C00L1,set_datcfg_ack_cts_timeout() 13469: DAT config band(1) ofdma_timeout Fail!
- [ 16.464071] WiFi@C02L1,hc_radio_res_request() 1679: wdev=6, hobj is not ready!
- [ 16.472157] phy_freq_adjust : no prim_ch value for adjust!
- [ 16.477706] phy_freq_adjust : no prim_ch value for adjust!
- [ 16.604726] WiFi@C00L1,MtCmdCr4RedSet() 914: MtCmdCr4RedSet: (ret = 0)
- [ 16.611916] WiFi@C23L1,DfsBuildChannelList() 3663: [RDM]: wdev is not 5G.
- [ 16.757026] WiFi@C00L1,ApAutoChannelAtBootUp() 497: not A band
- [ 16.762959] WiFi@C08L1,ap_run_at_boot() 623: ACS is disable !!
- [ 16.847176] WiFi@C00L1,TxCCKStreamCtrl() 20458: set wrong parameters
- [ 16.863620] PrintSrCmd:
- [ 16.863620] u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
- [ 16.863620] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
- [ 16.877708] PrintSrCmd:
- [ 16.877708] u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
- [ 16.877708] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
- [ 16.891747] PrintSrCmd:
- [ 16.891747] u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
- [ 16.891747] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
- [ 16.905840] PrintSrCmd:
- [ 16.905840] u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
- [ 16.905840] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
- [ 16.919965] PrintSrCmd:
- [ 16.919965] u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
- [ 16.919965] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
- [ 16.934086] PrintSrCmd:
- [ 16.934086] u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
- [ 16.934086] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
- [ 16.948285] mtk_ppe_dev_register_hook : ineterface ra0 register (1)
- [ 16.954591] [mtf_txpower_all_rate_info] band_idx:0 pwr:46 ChBand:2G ePAGain:0
- [ 16.968893] extif_put_dev(ra0)
- [ 16.971965] mtk_ppe_dev_unregister_hook : ineterface ra0 set null (1)
- [ 17.601733] WiFi@C02L1,HcGetEdca() 1249: wdev=0, hobj is not ready!
- [ 20.914282] WiFi@C23L1,DfsBuildChannelList() 3663: [RDM]: wdev is not 5G.
- [ 20.921302] WiFi@C23L1,DfsBuildChannelList() 3663: [RDM]: wdev is not 5G.
- [ 20.928118] nlwifi set ra0 channel=0
- [ 20.963961] phy_freq_adjust : no prim_ch value for adjust!
- [ 20.973673] WiFi@C23L1,HcGetBandByChannel() 1230: No hdev parking on channel:0, just return a default band_idx 0!
- [ 25.155581] WiFi@C23L1,DfsBuildChannelList() 3663: [RDM]: wdev is not 5G.
- [ 25.244388] WiFi@C00L1,TxCCKStreamCtrl() 20458: set wrong parameters
- [ 25.260797] PrintSrCmd:
- [ 25.260797] u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
- [ 25.260797] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
- [ 25.274796] PrintSrCmd:
- [ 25.274796] u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
- [ 25.274796] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
- [ 25.288783] PrintSrCmd:
- [ 25.288783] u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
- [ 25.288783] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
- [ 25.302778] PrintSrCmd:
- [ 25.302778] u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
- [ 25.302778] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
- [ 25.316859] PrintSrCmd:
- [ 25.316859] u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
- [ 25.316859] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
- [ 25.330949] PrintSrCmd:
- [ 25.330949] u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
- [ 25.330949] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
- [ 25.345111] extif_set_dev(ra0)
- [ 25.348176] [mtf_txpower_all_rate_info] band_idx:0 pwr:46 ChBand:2G ePAGain:0
- [ 25.355312] mtk_ppe_dev_register_hook : ineterface ra0 register (1)
- [ 25.361699] IPv6: ADDRCONF(NETDEV_CHANGE): ra0: link becomes ready
- [ 25.373958] mtk_soc_eth 15100000.ethernet eth0: Link is Down
- [ 25.395595] mtk_soc_eth 15100000.ethernet eth0: configuring for fixed/2500base-x link mode
- [ 25.403988] mtk_soc_eth 15100000.ethernet eth0: Link is Up - 2.5Gbps/Full - flow control rx/tx
- [ 25.432105] br-lan: port 1(eth0) entered blocking state
- [ 25.437346] br-lan: port 1(eth0) entered disabled state
- [ 25.442780] device eth0 entered promiscuous mode
- [ 25.456481] br-lan: port 1(eth0) entered blocking state
- [ 25.461737] br-lan: port 1(eth0) entered forwarding state
- [ 25.476181] mtk_soc_eth 15100000.ethernet eth1: configuring for fixed/2500base-x link mode
- [ 25.484828] mtk_soc_eth 15100000.ethernet eth1: Link is Up - 2.5Gbps/Full - flow control rx/tx
- [ 25.493584] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
- [ 25.672195] br-lan: port 2(ra0) entered blocking state
- [ 25.677364] br-lan: port 2(ra0) entered disabled state
- [ 25.682711] device ra0 entered promiscuous mode
- [ 25.687338] br-lan: port 2(ra0) entered blocking state
- [ 25.692505] br-lan: port 2(ra0) entered forwarding state
- [ 25.770484] WiFi@C00L1,ApAutoChannelAtBootUp() 497: not A band
- [ 25.776378] WiFi@C08L1,ap_run_at_boot() 623: ACS is disable !!
- [ 25.862658] WiFi@C00L1,TxCCKStreamCtrl() 20458: set wrong parameters
- [ 25.879187] PrintSrCmd:
- [ 25.879187] u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
- [ 25.879187] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
- [ 25.893273] PrintSrCmd:
- [ 25.893273] u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
- [ 25.893273] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
- [ 25.907364] PrintSrCmd:
- [ 25.907364] u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
- [ 25.907364] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
- [ 25.921426] PrintSrCmd:
- [ 25.921426] u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
- [ 25.921426] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
- [ 25.935572] PrintSrCmd:
- [ 25.935572] u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
- [ 25.935572] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
- [ 25.949720] PrintSrCmd:
- [ 25.949720] u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 0, u1Status = 0
- [ 25.949720] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
- [ 25.963957] mtk_ppe_dev_register_hook : ineterface ra2 register (2)
- [ 25.970287] [mtf_txpower_all_rate_info] band_idx:0 pwr:46 ChBand:2G ePAGain:0
- [ 26.093544] br-lan: port 3(ra2) entered blocking state
- [ 26.098691] br-lan: port 3(ra2) entered disabled state
- [ 26.104030] device ra2 entered promiscuous mode
- [ 26.108686] br-lan: port 3(ra2) entered blocking state
- [ 26.113857] br-lan: port 3(ra2) entered forwarding state
- [ 26.188330] SetThermalProtectDutyCfg(): band_idx: 0, level_idx: 0, duty: 100
- [ 26.199415] SetThermalProtectDutyCfg(): band_idx: 0, level_idx: 1, duty: 20
- [ 26.209349] SetThermalProtectDutyCfg(): band_idx: 0, level_idx: 2, duty: 15
- [ 26.218034] SetThermalProtectDutyCfg(): band_idx: 0, level_idx: 3, duty: 10
- [ 26.226620] SetThermalProtectEnable(): band_idx: 0, protection_type: 1, trigger_type: 1
- [ 26.234667] SetThermalProtectEnable(): trigger_temp: 117, restore_temp: 110, recheck_time: 5
- [ 26.245075] SetThermalProtectEnable(): band_idx: 0, protection_type: 2, trigger_type: 1
- [ 26.253142] SetThermalProtectEnable(): trigger_temp: 124, restore_temp: 0, recheck_time: 5
- [ 26.261567] (Thermal Protect) Radio Notify.
- [ 26.265772] band_idx: 0, level_idx: 0
- [ 26.271974] phy_freq_adjust : no prim_ch value for adjust!
- [ 26.277575] phy_freq_adjust : no prim_ch value for adjust!
- [ 26.283097] phy_freq_adjust : no prim_ch value for adjust!
- [ 26.288600] nlwifi set rax0 channel=0
- [ 26.302799] phy_freq_adjust : no prim_ch value for adjust!
- [ 26.308385] phy_freq_adjust : no prim_ch value for adjust!
- [ 26.315242] phy_freq_adjust : no prim_ch value for adjust!
- [ 26.323084] 7981@C23L1,HcGetBandByChannel() 1230: No hdev parking on channel:0, just return a default band_idx 0!
- [ 27.903237] sh (4916): drop_caches: 3
- [ 27.990621] sh (4895): drop_caches: 3
- [ 28.805415] PrintSrCmd:
- [ 28.805415] u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
- [ 28.805415] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
- [ 28.819419] PrintSrCmd:
- [ 28.819419] u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
- [ 28.819419] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
- [ 28.833416] PrintSrCmd:
- [ 28.833416] u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
- [ 28.833416] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
- [ 28.847407] PrintSrCmd:
- [ 28.847407] u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
- [ 28.847407] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
- [ 28.861483] PrintSrCmd:
- [ 28.861483] u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
- [ 28.861483] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
- [ 28.875557] PrintSrCmd:
- [ 28.875557] u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
- [ 28.875557] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
- [ 28.889668] mtk_ppe_dev_register_hook : ineterface rax0 register (3)
- [ 28.889785] [mtf_txpower_all_rate_info] band_idx:1 pwr:45 ChBand:5G ePAGain:0
- [ 29.269588] br-lan: port 4(rax0) entered blocking state
- [ 29.274843] br-lan: port 4(rax0) entered disabled state
- [ 29.280290] device rax0 entered promiscuous mode
- [ 29.285020] br-lan: port 4(rax0) entered blocking state
- [ 29.290265] br-lan: port 4(rax0) entered forwarding state
- [ 29.362326] WiFi@C02L1,hc_radio_res_request() 1679: wdev=5, hobj is not ready!
- [ 29.518734] PrintSrCmd:
- [ 29.518734] u1CmdSubId = 1, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
- [ 29.518734] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
- [ 29.532811] PrintSrCmd:
- [ 29.532811] u1CmdSubId = 5, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
- [ 29.532811] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
- [ 29.546876] PrintSrCmd:
- [ 29.546876] u1CmdSubId = 3, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
- [ 29.546876] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
- [ 29.560927] PrintSrCmd:
- [ 29.560927] u1CmdSubId = 23, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
- [ 29.560927] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
- [ 29.575059] PrintSrCmd:
- [ 29.575059] u1CmdSubId = 31, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
- [ 29.575059] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
- [ 29.589208] PrintSrCmd:
- [ 29.589208] u1CmdSubId = 33, u1ArgNum = 0, u1DbdcIdx = 1, u1Status = 0
- [ 29.589208] u1DropTaIdx = 0, u1StaIdx = 0, u4Value = 0
- [ 29.603494] mtk_ppe_dev_register_hook : ineterface rax2 register (4)
- [ 29.603613] [mtf_txpower_all_rate_info] band_idx:1 pwr:45 ChBand:5G ePAGain:0
- [ 29.825703] br-lan: port 5(rax2) entered blocking state
- [ 29.831013] br-lan: port 5(rax2) entered disabled state
- [ 29.836460] device rax2 entered promiscuous mode
- [ 29.841231] br-lan: port 5(rax2) entered blocking state
- [ 29.846471] br-lan: port 5(rax2) entered forwarding state
- [ 29.954691] SetThermalProtectDutyCfg(): band_idx: 1, level_idx: 0, duty: 100
- [ 29.965434] SetThermalProtectDutyCfg(): band_idx: 1, level_idx: 1, duty: 30
- [ 29.976605] SetThermalProtectDutyCfg(): band_idx: 1, level_idx: 2, duty: 20
- [ 29.987764] SetThermalProtectDutyCfg(): band_idx: 1, level_idx: 3, duty: 10
- [ 30.005083] SetThermalProtectEnable(): band_idx: 1, protection_type: 1, trigger_type: 1
- [ 30.013151] SetThermalProtectEnable(): trigger_temp: 117, restore_temp: 110, recheck_time: 5
- [ 30.033953] SetThermalProtectEnable(): band_idx: 1, protection_type: 2, trigger_type: 1
- [ 30.041998] SetThermalProtectEnable(): trigger_temp: 124, restore_temp: 0, recheck_time: 5
- [ 30.050404] (Thermal Protect) Radio Notify.
- [ 30.054613] band_idx: 1, level_idx: 0
- [ 35.239772] SCAN DONE, Reset FSM/CNTL IDLE.
- [ 39.753402] SCAN DONE, Reset FSM/CNTL IDLE.
- [ 89.729774] mtwf_dbg_prt: vsnprintf error
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement