SHARE
TWEET

Armbian_5.99_Nanopim4v2_Debian_buster_default 22.11.2019

pask876 Nov 22nd, 2019 110 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. Type [C-a] [C-h] to see available commands
  2. Terminal ready
  3. DDR Version 1.24 20191016
  4. In
  5. channel 0
  6. CS = 0
  7. MR0=0x98
  8. MR4=0x1
  9. MR5=0xFF
  10. MR8=0x8
  11. MR12=0x72
  12. MR14=0x72
  13. MR18=0x0
  14. MR19=0x0
  15. MR24=0x8
  16. MR25=0x0
  17. CS = 1
  18. MR0=0x18
  19. MR4=0x3
  20. MR5=0xFF
  21. MR8=0x8
  22. MR12=0x72
  23. MR14=0x72
  24. MR18=0x0
  25. MR19=0x0
  26. MR24=0x8
  27. MR25=0x0
  28. channel 1
  29. CS = 0
  30. MR0=0x98
  31. MR4=0x1
  32. MR5=0xFF
  33. MR8=0x8
  34. MR12=0x72
  35. MR14=0x72
  36. MR18=0x0
  37. MR19=0x0
  38. MR24=0x8
  39. MR25=0x0
  40. CS = 1
  41. MR0=0x18
  42. MR4=0x1
  43. MR5=0xFF
  44. MR8=0x8
  45. MR12=0x72
  46. MR14=0x72
  47. MR18=0x0
  48. MR19=0x0
  49. MR24=0x8
  50. MR25=0x0
  51. channel 0 training pass!
  52. channel 1 training pass!
  53. change freq to 416MHz 0,1
  54. Channel 0: LPDDR4,416MHz
  55. Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
  56. Channel 1: LPDDR4,416MHz
  57. Bus Width=32 Col=10 Bank=8 Row=15/15 CS=2 Die Bus-Width=16 Size=2048MB
  58. 256B stride
  59. channel 0
  60. CS = 0
  61. MR0=0x98
  62. MR4=0x1
  63. MR5=0xFF
  64. MR8=0x8
  65. MR12=0x72
  66. MR14=0x72
  67. MR18=0x0
  68. MR19=0x0
  69. MR24=0x8
  70. MR25=0x0
  71. CS = 1
  72. MR0=0x18
  73. MR4=0x81
  74. MR5=0xFF
  75. MR8=0x8
  76. MR12=0x72
  77. MR14=0x72
  78. MR18=0x0
  79. MR19=0x0
  80. MR24=0x8
  81. MR25=0x0
  82. channel 1
  83. CS = 0
  84. MR0=0x98
  85. MR4=0x1
  86. MR5=0xFF
  87. MR8=0x8
  88. MR12=0x72
  89. MR14=0x72
  90. MR18=0x0
  91. MR19=0x0
  92. MR24=0x8
  93. MR25=0x0
  94. CS = 1
  95. MR0=0x18
  96. MR4=0x1
  97. MR5=0xFF
  98. MR8=0x8
  99. MR12=0x72
  100. MR14=0x72
  101. MR18=0x0
  102. MR19=0x0
  103. MR24=0x8
  104. MR25=0x0
  105. channel 0 training pass!
  106. channel 1 training pass!
  107. channel 0, cs 0, advanced training done
  108. channel 0, cs 1, advanced training done
  109. channel 1, cs 0, advanced training done
  110. channel 1, cs 1, advanced training done
  111. change freq to 856MHz 1,0
  112. ch 0 ddrconfig = 0x101, ddrsize = 0x2020
  113. ch 1 ddrconfig = 0x101, ddrsize = 0x2020
  114. pmugrf_os_reg[2] = 0x3AA1FAA1, stride = 0xD
  115. ddr_set_rate to 328MHZ
  116. ddr_set_rate to 666MHZ
  117. ddr_set_rate to 928MHZ
  118. channel 0, cs 0, advanced training done
  119. channel 0, cs 1, advanced training done
  120. channel 1, cs 0, advanced training done
  121. channel 1, cs 1, advanced training done
  122. ddr_set_rate to 416MHZ, ctl_index 0
  123. ddr_set_rate to 856MHZ, ctl_index 1
  124. support 416 856 328 666 928 MHz, current 856MHz
  125. OUT
  126. Boot1: 2019-03-14, version: 1.19
  127. CPUId = 0x0
  128. ChipType = 0x10, 250
  129. mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000
  130. mmc: ERROR: Card did not respond to voltage select!
  131. emmc reinit
  132. mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000
  133. mmc: ERROR: Card did not respond to voltage select!
  134. emmc reinit
  135. mmc: ERROR: SDHCI ERR:cmd:0x102,stat:0x18000
  136. mmc: ERROR: Card did not respond to voltage select!
  137. SdmmcInit=2 1
  138. mmc0:cmd5,20
  139. SdmmcInit=0 0
  140. BootCapSize=0
  141. UserCapSize=30436MB
  142. FwPartOffset=2000 , 0
  143. StorageInit ok = 56276
  144. SecureMode = 0
  145. SecureInit read PBA: 0x4
  146. SecureInit read PBA: 0x404
  147. SecureInit read PBA: 0x804
  148. SecureInit read PBA: 0xc04
  149. SecureInit read PBA: 0x1004
  150. SecureInit read PBA: 0x1404
  151. SecureInit read PBA: 0x1804
  152. SecureInit read PBA: 0x1c04
  153. SecureInit ret = 0, SecureMode = 0
  154. atags_set_bootdev: ret:(0)
  155. GPT 0x3380ec0 signature is wrong
  156. recovery gpt...
  157. GPT 0x3380ec0 signature is wrong
  158. recovery gpt fail!
  159. LoadTrust Addr:0x4000
  160. No find bl30.bin
  161. No find bl32.bin
  162. Load uboot, ReadLba = 2000
  163. hdr 0000000003380880 + 0x0:0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
  164.  
  165. Load OK, addr=0x200000, size=0xca8e0
  166. RunBL31 0x40000
  167. NOTICE:  BL31: v1.3(debug):42583b6
  168. NOTICE:  BL31: Built : 07:55:13, Oct 15 2019
  169. NOTICE:  BL31: Rockchip release version: v1.1
  170. INFO:    GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
  171. INFO:    Using opteed sec cpu_context!
  172. INFO:    boot cpu mask: 0
  173. INFO:    plat_rockchip_pmu_init(1190): pd status 3e
  174. INFO:    BL31: Initializing runtime services
  175. WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
  176. ERROR:   Error initializing runtime service opteed_fast
  177. INFO:    BL31: Preparing for EL3 exit to normal world
  178. INFO:    Entry point address = 0x200000
  179. INFO:    SPSR = 0x3c9
  180.  
  181.  
  182. U-Boot 2019.10-armbian (Nov 22 2019 - 07:54:55 +0000)
  183.  
  184. Model: FriendlyElec NanoPi M4V2
  185. DRAM:  3.9 GiB
  186. MMC:   dwmmc@fe320000: 1, sdhci@fe330000: 0
  187. Loading Environment from EXT4... Card did not respond to voltage select!
  188. In:    serial@ff1a0000
  189. Out:   serial@ff1a0000
  190. Err:   serial@ff1a0000
  191. Model: FriendlyElec NanoPi M4V2
  192. rockchip_dnl_key_pressed: adc_channel_single_shot fail!
  193. Net:   eth0: ethernet@fe300000
  194. Hit any key to stop autoboot:  0
  195. Card did not respond to voltage select!
  196. switch to partitions #0, OK
  197. mmc1 is current device
  198. Scanning mmc 1:1...
  199. Found U-Boot script /boot/boot.scr
  200. 2949 bytes read in 6 ms (479.5 KiB/s)
  201. ## Executing script at 00500000
  202. Boot script loaded from mmc 1
  203. 142 bytes read in 5 ms (27.3 KiB/s)
  204. 7556947 bytes read in 480 ms (15 MiB/s)
  205. 18395144 bytes read in 1161 ms (15.1 MiB/s)
  206. 103833 bytes read in 14 ms (7.1 MiB/s)
  207. ## Loading init Ramdisk from Legacy Image at 04000000 ...
  208.    Image Name:   uInitrd
  209.    Image Type:   AArch64 Linux RAMDisk Image (gzip compressed)
  210.    Data Size:    7556883 Bytes = 7.2 MiB
  211.    Load Address: 00000000
  212.    Entry Point:  00000000
  213.    Verifying Checksum ... OK
  214. ## Flattened Device Tree blob at 01f00000
  215.    Booting using the fdt blob at 0x1f00000
  216.    Loading Ramdisk to f57c8000, end f5efcf13 ... OK
  217. ERROR: reserving fdt memory region failed (addr=0 size=0)
  218.    Loading Device Tree to 00000000f5746000, end 00000000f57c7fff ... OK
  219.  
  220. Starting kernel ...
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
Top